FCC ID: R33C4TSM7G 7" Portable Touch Screen

7 Portable Touch Screen Setup Guide Supported Models C4-TSM7-G-B (Portable Touch Screen, WiFi) Whats in the Box Carefully unpack the Control4 7" Portable Touch Screen from the box and ensure the following items are included in the box. Contact your Authorized Control4 Dealler immediately if you find any missing or damaged component. Control4 7" Portable Touch Screen (model C4-TSM7-G-B) with Control4 Navigator software pre-installed Battery Pack (model # C4-BAT71) Battery Cover with screw and plug Table Dock AC to DC Power Adapter and Power Cord 7 Portable Touch Screen Setup Guide (this document) Accessories Available Additional Battery Pack (model #C4-BAT71) Technical Specifications and Requirements Specifications Table 1-1. Hardware Specifications Panel Wireless Dimensions

(H x W x D) Weight Network 7 XGA Color LCD Module Resolution: 800 x 480 Luminance: Typ. 230 cd/m2 (AU) (Option: 170 cd/m2 (Toshiba)) Contrast Ratio: Typ. 500:1 Built In IEEE802.11b/g Wireless LAN Integral Antenna (b/g supported) 4 x 9.5 x 5 1.5 Kg WiFi (802.11 b/g) wireless access point (WAP) already configured to communicate with a Control4 controller (such as HC-200). See the Control4 web site, http://control4.com, for recommended WAP models. Safety Instructions 7 Portable Touch Screen Descriptions Follow this safety information for the Control4 7" Portable Touch Screen:

WARNING! To avoid bodily harm, understand and follow these safety precautions before operating the Control4 7" Portable Touch Screen:

Front View 3 4 5 6 7 Table Dock Using worn-out or damaged power cords may result in electric shock or fire. Always contact an authorized Control4 service provider for assistance if any repair or adjustment is required. AVERTISSEMENT! Pour viter des dommages physiques, comprenez et suivez ces mesures de scurit avant d'actionner l'cran tactile Control4 sans fil:

Utilisant us ou endommag les cordons de secteur peuvent avoir comme consquence la dcharge lectrique ou le feu. Entrez en contact avec toujours un fournisseur des services Control4 autoris pour l'aide si n'importe quelle rparation ou ajustement est exige. WARNUNG! Um Krperverletzung zu vermeiden, verstehen Sie und folgen Sie diese Sicherheitsanweisungen bevor Sie den drahtlosen Control4 Touch Screen betreiben:

Unter Verwendung abgedroschenen oder beschdigt kann Netzan-

schlusskabel Elektroschock oder Feuer ergeben. Treten Sie immer mit einem autorisierten Control4 Diensterbringer fr Untersttzung in Verbindung, wenn irgendeine Reparatur oder Justage angefordert wird. CAUTION! To avoid data loss or equipment damage, understand and follow these safety precautions before operating the Control4 7 Portable Touch Screen:

Always use standard battery packs supplied with the Control4 touch screen. Other battery packs may have different specifications, and may cause damage to the touch screen. Do not allow the battery pack to contact other metal objects. Do not use or place the touch screen near sources of heat or expose it to direct sunlight for an extended period of time. Store it in a cool and dry place. Do not use pens or sharp objects to write on the screen. ATTENTION! Pour viter la perte de donnes ou les dommages aux quipments, comprenez et suivez ces mesures de scurit avant d'actionner le Control4 7" ; cran tactile tenu dans la main :

Toujours paquets standard de batterie d'utilisation fournis avec le Control4 7" ; cran tactile tenu dans la main. D'autres paquets de batterie peuvent avoir diffrentes caractristiques et peuvent endommager l'cran tactile. Ne laissez pas le paquet de batterie entrer en contact avec d'autres objets en mtal. N'utilisez pas ou ne placez pas l'cran tactile prs des sources de chaleur ou ne l'exposez pas la lumire du soleil directe pendant une priode pro-

longe. Stockez-le dans un endroit frais et sec. N'employez pas les stylos ou les objets pointus pour crire sur l'cran. VORSICHT! Vorsicht! Um Datenverlust oder Ausrstungsschaden zu vermeiden, verstehen Sie und vor dem Betrieb des Control4 7" folgen Sie diese Sicherheitsanweisungen; Handtouch Screen:

Immer Gebrauchstandardbatteriestze geliefert mit dem Control4 7"

Handtouch Screen. Andere Batteriestze knnen verschiedene Spezifika-

tionen haben und knnen Schaden des Touch Screen verursachen. Lassen Sie den Batteriesatz mit anderen Metallgegenstnden nicht in Verbindung treten. Benutzen Sie oder setzen Sie den Touch Screen nicht nahe Quellen der Hitze oder setzen Sie ihn direktem Tageslicht whrend eines ausgede-

hnten Zeitabschnitts aus. Speichern Sie es in einem khlen und trockenen Platz. Benutzen Sie nicht Federn oder scharfe Gegenstnde, um auf den Schirm zu schreiben. 1 2 8 9 10 11 12 1. Room Off button 2. Programmable buttons (4) 3. Microphone (not used) 4. AC Power indicator 5. Battery indicator 6. WiFi indicator 7. Speaker (not used) 8. Mute button 9. Volume Up/Down buttons 10. Channel Up/Down buttons 11. Select key & direction keys 12. Touch screen LEDs: The LEDs indicate the status of the power supply, battery charge, and WiFi signal strength. See Table 1-2. Table 1-2. Color Indication for LEDs Indicator Blue AC Power In dock and being powered by dock Orange N/A Red N/A Battery Full battery Low battery Extremely low battery WiFi Good network signal Weak network signal Very weak network signal NOTE: When the battery power is critically low, the device can still be turned on as long as the dock is plugged in to the AC adapter. Direction Key: Use this cursor control to move the highlighter around the screen

(up, down, right, and left). Touch Screen: Use this screen to perform operations and enter data by touching the screen (no stylus required). Top View Suspend button Right View Headphone jack Back View 1 2 3 1. Mini USB port: Use to restore software from USB stick (not provided) 2. Reset button (inside pinhole) 3. Battery compartment Speaker jack Power jack Install the Battery IMPORTANT! For important information regarding loss of battery power and maintaining the life of your battery, refer to Battery Instructions. IMPORTANT! Pour l'information importante concernant la perte de puissance et de maintenir de batterie la vie de votre batterie, rfrez-

vous la gestion de Battery Instructions. WICHTIG! Zu wichtiger Information betreffend Verlust der Batterieleistung und des Beibehaltens des Lebens Ihrer Batterie, beziehen Sie sich Battery Instructions. The Control4 Touch Screen has two power sources: battery or dock with AC adapter. To install the battery:

1 Connect the battery pack to the connector provided in the battery compartment, and then place the battery in the compartment. NOTE: When the battery is first connected, the device will power up. The battery ships partially charged, but the device should charge in its dock for four (4) hours before extended use. 2 Cover the battery compartment with the cover plate provided, and then secure the plate with the screw and plug provided. Modes When Docked The Control4 7" Portable Touch Screen has the following modes:

Off: Screen is dark, AC Power indicator is dark, and battery indicator is dark

(touch screen has no power). To power up the device, ensure that either the battery is connected and charged, or the docks power cord is connected to the dock and the touch screen is properly seated in the dock. Suspend: Screen is dark. but AC Power indicator is lit. To wake up the device, press any button. Screensaver: Screensaver is running. To wake up the device, touch the screen. Wake: Screen displays anything other than a screensaver. To place the device in Sleep mode, press the Suspend button. Connect to Power Supply 1. Plug the DC power supply into the power jack on the Table Dock. Plug the power adapter into a power outlet. The AC Power indicator lights up. 2. When the Touch Screen is docked, or when a charged battery is installed, wake up the touch screen by either touching the screen or by pressing any button. NOTE: The Touch Screen must be connected to a power supply for four (4) hours in order for the battery to be fully charged. 1.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter . 2.This equipment complies with fcc rf radiation exposure limits set forth for an uncontrolled environment. This device was tested for typical lap held operations with the device contacted directly to the human body to the back side of the notebook computer. To maintain compliance with fcc rf exposure compliance requirements. Avoid direct contact to the transmitting antenna during transmitting . Configure the Network Settings Connect to a Control4 Controller In order for this Touch Screen to communicate with the other devices in the Control4 Home-Automation System, you must configure the network settings. To configure the network settings for this device:

1. Ensure that the WiFi (802.11b/g) wireless access point (WAP) is configured to communicate with a Control4 Controller. 2. Gather the following wireless network information from your WAP:

SSID (Service Set Identifier). WEP/WPA security key, if enabled. IP Addressing Requirements: The default is DHCP (with dynamic addresses). If you need to use a static IP address instead, you must provide a network IP address for this device. 3. On the Touch Screen, press Info >

Network > Wireless Settings. 4. On Network: Wireless Settings do the following:

4.a Press Add. 4.b Press the text box provided for Network (SSID). An on-screen keyboard is displayed. Enter the SSID (case sensitive), and then press Done. 4.c If WEP/WPA is enabled, press the WEP/WPA key button to select it, and then press the text box provided. An on-screen keyboard is displayed. Select the WEP/WPA key length; if required, enter the WEP/

WPA key, and then press Done. 4.d You must enable the wireless settings so the Touch Screen can connect to the network. After enabling the Wireless Network settings, the Touch Screen will connect to the Wireless Network. After connecting, press OK to return to the Wireless Network page. 4.e Press OK again to return to the Network page. Your updates are displayed on this page. 5. The IP address is set to DHCP by default. If you need to set a static IP address instead, complete the following steps:

5.a On the Network page, press the IP Address button. 5.b Choose Assigned (for static IP address). 5.c Press the IP Address text box provided on the screen. An on-screen keypad is displayed. Enter the static IP address for this device, and then press OK. 5.d Press OK to return to the Network page. You should now be able to connect to a Control4 Director running on a Control4 device on the network. Configure in Composer Using the Composer software of your choice, add and configure the Control4 7 Portable Touch Screen to your project. 1. Start Composer and connect locally to Director. 2. Add the touch screen object to the project:

2.a In the System Design View (default view) project tree (left pane), highlight the room where this touch screen resides. 3. 2.b Under My Drivers, double-click Touch Screen - 7 Portable. Identify the device:

3.a Go to the Connections view > Network tab (left pane). 3.b In the IP Network Connections list (center pane), highlight Touch Screen - 7 Portable, and then click Identify. 3.c When prompted in the Composer screen, press the button on the touch screen as indicated on the Identify screen in Composer to identify it to the network. 3.d When the address displays in Composer, click Close. NOTE: The Control4 7" Portable Touch Screen controls are auto-populated by a project on the Controller that it connects to. If the subsystem buttons are not lit and no default room is displayed, you are not connected to a Controller. 1. On the Home page, press the Info button. 2. On the Info page, press the Director button. 3. If the Director page does not display, the Director view has probably been disabled; you must provide a passcode to enable it. If you need the passcode, contact your Control4 Dealer. If you have the passcode, go to Config > Disable View, enter the passcode, and then press Director to unselect it. Now press the Director button again, and you should be able to view the Director page. 4. In the Connect to a Director list of IP addresses, highlight your Controllers IP address, and then press Connect. A Connecting message displays first, and then the address displays in the upper-right corner of the Touch Screen display area to indicate your current connection. 5. Verify that the date, default location (room), and time all appear across the top of the screen to ensure that you have all the required connections. Troubleshooting If you experience operational problems with the Control4 7 Portable Touch Screen, check the following subsections for system troubleshooting. If problems persist, please contact your Control4 Dealer. Battery Operation Problems If main battery is low Replace or recharge the battery as soon as possible. Plug in the AC-DC adapter, and continue using the Touch Screen. If the battery appears to be damaged or has reached the end of its service life Purchase a new battery by contacting your Control4 Dealer. If the Touch Screen turns off automatically Check whether the battery power is too low or completely drained. Check whether the system is in Suspend mode (refer to Modes When Docked). Tap the screen to check whether the display will activate. Plug in the AC-DC adapter to charge the battery. If the Touch Screen does not turn on when not connected to dock Make sure the battery pack is inserted. The battery power may be too low to run the touch screen. Try connecting it to the dock. Display Related Problems If the screen appears dark Excessive exposure to direct sunlight may cause the Touch Screen to darken temporarily. This is a natural consequence for LCD screens and is not permanent. If the screen appears blank Restart the Touch Screen by pressing the Suspend button for 10 seconds. System Operation Problems If the Touch Screen locks up or runs slowly Try to reset the system by pressing the Reset button on the back of the screen. You may need to use the tip of a pen to press the button. If pressing the Reset button does not solve the problem, press the Suspend button for memory initialization (see Top View for the location). This will reset all configurations, and will require completing the setup process again. Do this by pressing and holding the Suspend button for at least 10 seconds until the Touch Screen reboots. Continue to press and hold the Suspend button until the on-screen instructions Release button now to reset the network settings appears. Release the button. Try to unplug the dock and plug it back in. If the Touch Screen is damaged Contact your Control4 Dealer from whom you purchased the Touch Screen. If you have network connection problems View the system's wireless status by checking the WiFi indicator LED. Make sure that you have provided the required network configuration information described in Configure the Network Settings. If using WEP or WPA, ensure that the same key is being used on the touch screen, and at the Wireless Access Point (WAP). Make sure the access point is connected to the proper network jack while it is functioning in the network infrastructure mode. Battery Instructions Battery Charging For safety reasons, the battery pack is shipped only partially charged. When you are ready for use, fully charge the battery pack by using the cradle for approximately four (4) hours. Battery Cell Over-Discharge Notice When the battery is discharged to a certain low voltage, the battery cell will be damaged permanently, and its capacity will drop dramatically (over-discharge condition). If the over-discharge condition occurs several times, the battery cell is ruined. Over-discharge failure is not covered by the standard product warranty. Operation Management When the battery pack is attached to a device, it is possible for the battery pack to lose battery power due to the small standby current of the system. Use the dock or cradle to charge the battery if the system is not used for several days. When the device is idle for a few days without charging, we recommended that you separate the battery pack from the device to extend the battery life and to help prevent battery cell over-discharge. To maintain the life of the battery, you still need to recharge it periodically, due to a self-discharge feature in the battery cell. Storage A battery kept in storage without being used for a long time loses power and must be recharged before use. To recharge a stored battery to 100% of its capacity, use the dock or cradle. WARNING! If charging to 100% of capacity is necessary, do not store battery packs next to each other. Any battery pack with high energy is dangerous at high temperatures, and storing two (2) or more of these battery packs next to each other fully charged only increases the danger. AVERTISSEMENT! Si le remplissage 100% de la capacit est ncessaire, ne stockez pas les paquets ct d'un des autres de batterie. N'importe quel paquet de batterie avec la haute nergie est dangereux tempratures leves et le stockage de deux ou de plus de ces paquets de batterie ct de l'un l'autre a entirement charg seulement des augmentations le danger. WARNUNG! Wenn die Aufladung bis 100% der Kapazitt notwendig ist, speichern Sie Batteriestze nicht nahe bei gegenseitig. Irgendein Batteriesatz mit Hochenergie ist an den Hochtemperaturen gefhrlich und die Speicherung zwei oder mehr dieser Batteriestze nahe bei einander lud vllig nur Zunahmen die Gefahr auf. Regulatory Information FCC Information FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: R33C4TSM7G Edison Test Lab (ETL) This product has been tested to the requirements of, and shown to be in compliance with, the following requisite standards for US and Canada; UL 916, Issue: 1998 Ed 3 Rev: 2006. Standard for Safety Energy Management Equipment. Canadian Standard Association (CSA) The C adjacent to the ETL logo signifies this product is compliant with Canadian standard; CSA C22.2 #205, Issue 1983 the Signal Equipment General Instruction number 1 (R2004) IC: 7848A-C4TSM7G Australia/New Zealand This product has been tested to the requirements of, and shown to be in compliance with, the following requisite standards:

AS/NZS CISPR 22: 2006Information Technology EquipmentRadio disturbance AS/NZS 4268: 2008Spread Spectrum Equipment using 900MHz, 2.4GHz bands. AS/NZS 60950-1: 2003. characteristics. Europe: CE Declaration of Conformity European Contact United States Contact Control4 UK Limited Unit 3, Green Park Business Centre Sutton-on-the-Forest, York YO61 IET, United Kingdom

+44 (0) 134781 2300 c4@control4-UK.com Control4 Corporation 11734 S. Election Road, Suite 200 Salt Lake City, UT 84020-6432, USA Tel (801) 523-3100 Product: 7 Portable Touch Screen, model number C4-TSM7-G-B The undersigned hereby declares, on behalf of Control4 Corporation, that the above-referenced product, to which this declaration relates, is in conformity with the provisions of:

Council Directive 2004/108/EEC (Jan 20, 2005) on Electromagnetic Compatibility Council Directive 1999/5/EC (Mar 9, 1999) on Radio & Telecommunication Terminal Equipment Council Directive 2006/95/EC (Feb. 19, 1973) on Low Voltage Equipment Safety Council Directive 93/68/EEC (Jul. 22, 1993) Amending Directives 2004/108/EC and 2006/95/EC and has been tested to the requirements of, and shown to be in compliance with, the following requisite standards:

EN 301 489-1 V1.6.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Electro-

Magnetic Compatibility (EMC) standard for radio equipment and servicesPart 1 Common techni-

cal requirements.

(R&TTE) EN 301 489-17 V1.2.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Elec-

troMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific con-

ditions for 2.4 GHz wideband transmission systems. equipment. EN 300 328-2 V1.7.1Wide band transmission systems; data transmission equipment operating in the 2.4GHz ISM band. Harmonised EN covering essential requirements under Article 3(2) of the R&TTE Directive. IEC 60950 2005 (2nd Edition) and EN 60950-1: 2006Information Technology Equipment Safety with national and group differences in accordance with CB Bulletin No. 109A December 2005. The Technical Construction File required by these Directives is maintained at the corporate headquarters of Control4, Salt Lake City, Utah, U.S.A. Signed, Brett MolenVice President, Engineering, _______, 2008 Dansk: Vigtigt! Lederen med grn/gul isolation m kun tilsluttes en klemme mrket eller Norsk: Apparatet m tilkoples jordet stikkontakt. Suomi: Laite on liitettv suojamaadoituskoskettimilla varustettuun pistorasiaan. Svensk: Apparaten skall anslutas till jordat uttag. Recycling For information on recycling, please go to www.control4.com/recycling. Warranty Limited 2-year Warranty. Refer to http://www.control4.com/warranty. About this Document United States Patents Pending. 2009 Control4. All rights reserved. Control4, the Control4 logo and Everyday Easy are registered trademarks or trademarks of Control4 Corporation in the United States and/or other countries. All other names or brands may be claimed as property by their respective owners. Pricing and specifications subject to change without notice. Part Number: 200-00079 Rev A

(Draft 14)