all | frequencies |
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
Regulatory statement | Users Manual | 3.15 MiB | ||||
1 2 3 |
|
User manual-1 | Users Manual | 312.81 KiB | / August 06 2019 | |||
1 2 3 |
|
QSG | Users Manual | 680.11 KiB | ||||
1 2 3 |
|
User manual | Users Manual | 682.38 KiB | ||||
1 2 3 |
|
WA2200-C QSG | Users Manual | 821.39 KiB | ||||
1 2 3 | Cover Letter(s) | / September 07 2019 | ||||||
1 2 3 | Cover Letter(s) | / September 07 2019 | ||||||
1 2 3 | Test Report | / September 07 2019 | ||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Cover Letter(s) | / September 07 2019 | ||||||
1 2 3 | External Photos | |||||||
1 2 3 | Internal Photos | |||||||
1 2 3 | RF Exposure Info | / September 07 2019 | ||||||
1 2 3 | Cover Letter(s) | / September 07 2019 | ||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Test Report | / September 07 2019 | ||||||
1 2 3 | Test Report | / September 07 2019 | ||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | External Photos | / August 06 2019 | ||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Internal Photos | / August 06 2019 | ||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Setup Photos | / August 06 2019 | ||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) |
1 2 3 | Regulatory statement | Users Manual | 3.15 MiB |
Regulatory Compliance & Safety Information for Control4 Model WA-2200, WA-2200-C, WA-2200-1 & WA-2200-C-1 Electrical Safety Advisory Scurit lectrique consultatif Important Safety Instructions Consignes de scurit importantes Read the safety instructions before using this product. Lisez les consignes de scurit avant d'utiliser ce produit. 1. Read these instructions. 1. Lisez ces instructions. 2. Keep these instructions. 2. Conservez ces instructions. 3. Heed all warnings. 3. Respectez tous les avertissements. 4. Follow all instructions. 4. Suivez toutes les instructions. 5. Do not use this apparatus near water. 5. Ne pas utiliser cet appareil prs de l'eau. 6. Clean only with dry cloth. 6. Nettoyez-le uniquement avec un chiffon sec. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 7. Ne pas bloquer les ouvertures de ventilation. Installer conformment aux instructions du fabricant. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8. Ne pas installer prs de sources de chaleur telles que des radiateurs, registres de chaleur, poles, ou autres appareils (incluant les amplificateurs) qui produisent de la chaleur. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 9. Ne pas contourner le dispositif de scurit de la fiche polarise ou de mise la terre. Une fiche polarise possde deux lames dont une plus large que l'autre. Une fiche de terre a deux lames et une troisime broche de terre. La lame large ou la troisime broche est fournie pour votre scurit. Si la fiche fournie ne s'adapte pas votre prise, consultez un lectricien pour le remplacement de la prise obsolte. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 10. Protgez le cordon d'alimentation ne soit pitin ou pinc, en particulier au niveau des fiches, des prises et au point o il sort de l'appareil. 11. Only use attachments/accessories specified by the manufacturer. 11. Utilisez uniquement des fixations / accessoires spcifis par le fabricant. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 12. Utilisez uniquement avec le chariot, le socle, le trpied, le support ou la table spcifis par le fabricant ou vendu avec l'appareil. Lorsque vous utilisez un chariot, soyez prudent lorsque vous dplacez l'ensemble chariot / appareil pour viter des blessures dues au renversement. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 13. Dbranchez cet appareil pendant les orages ou lorsqu'il n'est pas utilis pendant de longues priodes de temps. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 14. Confiez toutes les rparations un personnel qualifi. Une rparation est ncessaire lorsque l'appareil a t endommag de quelque faon que ce soit le cordon d'alimentation ou la fiche est endommag, du liquide a t renvers ou si des objets sont tombs dans l'appareil, l'appareil a t expos la pluie ou l'humidit, ne fonctionne pas normalement, ou s'il est tomb. 15. This equipment uses AC power which can be subjected to electrical surges, typically lightning transients which are very destructive to customer terminal equipment connected to AC power sources. The warranty for this equipment does not cover damage caused by electrical surge or lightning transients. To reduce the risk of this equipment becoming damaged it is suggested that the customer consider installing a surge arrestor. 15. Cet quipement utilise la puissance AC qui peuvent tre soumis des surtensions lectriques, la foudre gnralement transitoires qui sont trs destructives envers les quipements terminaux connects des sources d'alimentation CA. La garantie de cet appareil ne couvre pas les dommages causs par les surtensions lectriques ou transitoires de foudre. Pour rduire le risque de cet quipement devient endommag, il est suggr que le client envisager l'installation d'un limiteur de surtension. 16. To completely disconnect unit power from the AC mains, remove the power cord from the appliance coupler and/or turn off the circuit breaker. To reconnect power, turn on the circuit breaker following all safety instructions and guidelines. The circuit breaker shall remain readily accessible. 16. Pour dbrancher compltement l'alimentation secteur du rseau secteur, retirez le cordon d'alimentation du coupleur de l'appareil et / ou teignez le disjoncteur. Pour reconnecter l'alimentation, allumez le disjoncteur en suivant toutes les consignes et consignes de scurit. Le disjoncteur doit tre facilement accessible. 17. This product relies on the buildings installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 20A. 17. Ce produit repose sur l'installation des btiments pour les courts-circuits (surintensit) de protection. Assurez-vous que le dispositif de protection est assigne ne dpassant pas:
20A. 18. CAUTION: As with all batteries, there is a risk of explosion or personal injury if the battery is replaced by an incorrect type. Dispose of used battery according to the instructions of the battery manufacturer and applicable environmental guidelines. Do not open, puncture or incinerate the battery, or expose it to conducting materials, moisture, liquid, fire or heat above 54 C or 130 F. 18. ATTENTION: Comme avec toutes les batteries, il ya un risque d'explosion ou de blessure si la batterie est remplace par un type incorrect. liminez les batteries usages selon les instructions du fabricant de la batterie et applicables des directives environnementales. Ne pas ouvrir, percer ou incinrer la batterie, ou de l'exposer des matriaux conducteurs, de l'humidit, du liquide, un incendie ou une temprature suprieure 54 C ou 130 F. 19. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. 19. N'introduisez jamais d'objets d'aucune sorte dans ce produit travers les fentes du botier car ils pourraient toucher des points de tension dangereux ou court-circuiter des pices qui pourraient entraner un incendie ou un choc lectrique. 20. This product can interfere with electrical equipment such as tape recorders, TV sets, radios, computers and microwave ovens if placed in close proximity. 20. Ce produit peut interfrer avec des appareils lectriques tels que les magntophones, tlviseurs, radios, ordinateurs et fours micro-ondes si placs proximit. The lightning flash and arrow head within the triangle is a warning sign alerting you of dangerous voltage inside the product L'clair et la flche dans le triangle est un signe d'alerte pour vous avertir d'une tension dangereuse l'intrieur du produit Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. Attention: Pour rduire le risque de choc lectrique, ne pas retirer le couvercle
(ou l'arrire). Aucune pice rparable par l'utilisateur. Confiez l'entretien un personnel qualifi. The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. Le point d'exclamation dans un triangle est un signe d'avertissement vous signale des instructions importantes accompagnant le produit. See marking on bottom / back of product Voir le marquage sur les bas / dos du produit Warning!: To reduce the risk of electrical shock, do not expose this apparatus to rain or moisture AVERTISSEMENT! Pour rduire le risque de choc lectrique, n'exposez pas cet appareil la pluie ou l'humidit. Save these instructions Conservez ces instructions USA & Canada Compliance FCC Part 15, Subpart B & IC Unintentional Emissions Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver Increase the separation between the equipment and receiver. is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules and ISEDs licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme la section 15 des rgles de la FCC et ISEDs aux RSS exempts de licence d'ISED. Son utilisation est soumise aux deux conditions suivantes: (1) Cet appareil ne doit pas causer dinterfrences nuisibles et (2) cet appareil doit accepter toutes les interfrences reues, y compris celles pouvant entraner un fonctionnement non souhait. IMPORTANT! Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. IMPORTANT! Tous les changements ou modifications pas expressment approuvs par la partie responsable de la conformit ont pu vider lautorit de lutilisateur pour actionner cet quipement. Canada Warning Statement:
CAN ICES-3 (B)/NMB-3(B) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Ce produit rpond aux spcifications techniques applicables l'innovation, Science et Dveloppement conomique Canada. FCC Part 15, Subpart C / RSS-247 Intentional Emissions Interference Statement Compliance of this equipment is confirmed by the following certification numbers that are placed on the equipment:
Notice: The term FCC ID: and IC: before the certification number signifies that FCC and Industry Canada technical specifications were met. FCC ID: R33WA2200 IC: 7848A-WA2200 Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and
(iii) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement:
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
(ii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5725 5 850 MHz) doit tre conforme la limite de la p.i.r.e. spcifie pour l'exploitation point point et lexploitation non point point, selon le cas;
(iii) De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. FCC Partie 15, sous-partie C / RSS-247 Dclaration volontaire des missions interfrences Conformit de cet appareil est confirm par les chiffres de certification suivants qui sont placs sur l'quipement:
Avis: Le terme FCC ID:" et "IC:" devant le numro de certification signifie que les spcifications techniques de la FCC et d'Industrie Canada ont t respectes. FCC ID: R33WA2200 IC: 7848A-WA2200 Cet quipement doit tre install par des professionnels qualifis ou entrepreneurs conformment aux normes FCC partie 15.203 & IC RSS-247, Exigences d'antenne. Ne pas utiliser une antenne autre que celui fourni avec l'appareil. Cet metteur ne doit pas tre localis ou fonctionner avec d'autres antennes ou transmetteurs. Les oprations dans la bande 5.15-5.25GHz sont limites l'utilisation l'intrieur seulement. RF Radiation Exposure Statement This equipment complies with FCC RF and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body or nearby persons. Dclaration d'exposition aux radiations RF Cet quipement est conforme aux limites d'exposition aux rayonnements RF et IC de la FCC dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20 centimtres entre le radiateur et votre corps ou des personnes proches. Control4 Corporation 11734 S Election Road Draper, UT 84020 Email: rmidgley@control4.com Phone: (801) 523-3187 Europe Compliance Compliance of this equipment is confirmed by the following logo that is placed on the product ID label that is placed on the bottom of the equipment. The full text of the EU Declaration of Conformity (DoC) is available on the following pages:
This product can be put into service in all of the EU member states, European Free Trade Association
(EFTA) and EU candidate countries without any restriction. BE DE ES CY HU PL SK IS MK BG EE FR LV MT PT FI LI AL CZ IE HR LT NL RO SE NO RS DK EL IT LU AT SI UK CH TR The frequency and maximum transmitted power in EU are listed as below:
2412 - 2472 MHz: 15.0 dBm 5180 - 5240 MHz: 17.5 dBm WLAN 5GHz:
Operations in the 5.15-5.35GHz band are restricted to indoor usage only. Recycling Control4 understands that a commitment to the environment is essential for a health life and sustainable growth for future generations. We are committed to supporting the environmental standards, laws, and directives that have been put in place by various communities and countries that deal with concerns for the environment. This commitment is represented by combining technological innovation with sound environmental business decisions. WEEE Compliance Control4 is committed to meeting all requirements of the Waste Electrical and Electronic Equipment (WEEE) directive (2012/19/EC). The WEEE directive requires the manufacturers of electrical and electronic equipment who sell in EU countries: (1) label their equipment to notify customers that it needs to be recycled, and (2) provide a way for their products to be appropriately disposed of or recycled at the end of their product lifespan. For collection or recycling of Control4 products, please contact your local Control4 representative or dealer. About this Document Copyright 2018 Control4 Corporation. All rights reserved. Control4 and the Control4 logo are registered trademarks or trademarks of Control4 Corporation in the United States and/or other countries. Part Number 200-00XXX Rev A, 1/2/2019 European Compliance (English) Conformity of the equipment with the guidelines below is attested by the application of the CE mark. Manufacturers Name:
Manufacturers Address:
CE Declaration of Conformity CONTROL4 CORPORATION 11734 S. ELECTION ROAD SUITE 200 SALT LAKE CITY UT 84020 USA EU Representative Name: CONTROL4 EMEA LIMITED EU Representative Address: UNIT3, GREEN PARK BUSINESS CENTRE SULTON-ON-THE FOREST YORK YO61 IET, UNITED KINGDOM 802.11ac 2x2 Wave 2 Access Point Pakedge WA-2200-1 & WA-2200-C-1 Product Name(s):
Brand:
Model(s):
Product Standard(s) to which Conformity of the Council Directive(s) is declared:
EMC - 2014/30/EU Electromagnetic Compatibility (EMC) Directive:
(Emissions) EN 55032:2015 (Immunity) EN 55024:2010 + A1:2015, EN 61000-3-2:2014 & EN 61000-3-3:2013 Safety 2014/35/EU Low Voltage Directive (LVD):
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 Radio - 2014/53/EU Radio Equipment Directive (RED):
EN 300 328 V2.1.1 (2016-11), EN 301 893 V2.1.1 (2017-05), EN 301 489-1 V2.1.1 (2017-02), EN 301 489-17 V3.1.1 (2017-02) & EN 50385:2002 RoHS - 2011/65/EU Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment (EEE) & WEEE - 2002/96/EC Waste of Electrical and Electronic Equipment (EEE). We, the undersigned, hereby declare that the equipment specified above conforms to the above directives and standards. Date of Issue: TBD Legal Representative Signature Roger Midgley Sr. Regulatory Compliance Engineer Conformit europenne (French) Conformit de l'quipement avec les directives ci-dessous est atteste par l'apposition de la marque CE. Dclaration de conformit CE Le nom du fabricant:
Le fabricant Adresse:
Nom Reprsentant de l'UE: CONTROL4 EMEA LIMITED UE reprsentant Adresse: Unit3, GREEN PARK CENTRE D'AFFAIRES CONTROL4 CORPORATION 11734 S. LECTION Road Suite 200 SALT LAKE CITY UT 84020 USA Sulton-ON-THE FOREST YORK YO61 IET, ROYAUME-UNI 802.11ac 2x2 Wave 2 Access Point Pakedge WA-2200-1 & WA-2200-C-1 Nom (s) de produit:
Marque:
Modle (s):
Produit standard (s) dont la conformit de la directive du Conseil (s) est dclare:
EMC - 2014/30 / "compatibilit lectromagntique (CEM)" UE:
(missions) EN 55032:2015 (immunit) EN 55024:2010 + A1:2015, EN 61000-3-2:2014 & EN 61000-3-3:2013 Scurit - 2014/35/EU "Directive Basse Tension (DBT)":
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 Radio - 2014/53 / UE directive quipement radio (RED):
EN 300 328 V2.1.1 (2016-11), EN 301 893 V2.1.1 (2017-05), EN 301 489-1 V2.1.1 (2017-02), EN 301 489-17 V3.1.1 (2017-02) & EN 50385:2002 RoHS - 2011/65 / UE limitation de l'utilisation de certaines substances dangereuses dans les quipements lectriques et lectroniques (EEE) et DEEE - 2002/96 / CE Dchets d'quipements lectriques et lectroniques (EEE). Nous, soussigns, dclarons que l'quipement indiqu ci-dessus est conforme aux directives et normes ci-dessus. Date de publication TBD Reprsentant lgal Signature Roger Midgley Ingnieur de conformit rglementaire Sr. European Compliance (German) Die Konformitt mit den folgenden Richtlinien wird durch die Anwendung des CE-Kennzeichen besttigt. CE-Konformittserklrung 802.11ac 2x2 Wave 2 Access Point Pakedge WA-2200-1 & WA-2200-C-1 Control4 CORPORATION 11734 S. WAHL ROAD SUITE 200 SALT LAKE CITY UT 84020 USA Control4 EMEA LIMITED Unit3, GREEN Park Geschftszentrum Sulton-ON-THE FOREST YORK YO61 IET, VEREINIGTES KNIGREICH Name des Herstellers:
Adresse des Herstellers:
EU-Vertreter Name:
EU-Vertreter Adresse:
Produkt-Name (n):
Marke:
Modell (e):
Produkt-Norm (en), um die Konformitt der Richtlinie (n) deklariert ist:
EMC - 2014/30 / EG "Elektromagnetische Vertrglichkeit (EMV) Die Richtlinie":
(Emissionen) EN 55032:2015 (Immunitt) EN 55024:2010 + A1:2015, EN 61000-3-2:2014 &
EN 61000-3-3:2013 Sicherheit - 2014/35/EU "Niederspannungsrichtlinie (LVD)":
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 Radio - 2014/53 / EU ber Funkanlagen-Richtlinie (RED):
EN 300 328 V2.1.1 (2016-11), EN 301 893 V2.1.1 (2017-05), EN 301 489-1 V2.1.1 (2017-02), EN 301 489-17 V3.1.1 (2017-02) & EN 50385:2002 RoHS - 2011/65 / EU zur Beschrnkung der Verwendung bestimmter gefhrlicher Stoffe in Elektro- und Elektronikgerten (EEE) & WEEE - 2002/96 / EG Richtlinie ber Elektro- und Elektronikgerten (EEE). Wir, die Unterzeichneten, erklren hiermit, dass das oben angegebene Gert zu den oben genannten Richtlinien und Normen. Ausstellungsdatum: TBD Gesetzlicher Vertreter Stempel, Unterschrift Roger Midgley Sr. Regulatory Compliance-Ingenieur Conformit Europea (Italian) Conformit del materiale con le linee guida qui sotto attestata dall'applicazione del marchio CE. Dichiarazione di conformit CE Sulton-ON-THE FOREST YORK YO61 IET, REGNO UNITO 802.11ac 2x2 Wave 2 Access Point Pakedge WA-2200-1 & WA-2200-C-1 Control4 CORPORATION 11734 S. ELEZIONI STRADA SUITE 200 SALT LAKE CITY UT 84020 Stati Uniti d'America Nome del produttore:
Indirizzo del produttore:
UE Nome Rappresentante: Control4 EMEA LIMITED UE Indirizzo Rappresentante: Unit3, GREEN PARK BUSINESS CENTRE Nome del prodotto (s):
Marca:
Modello (s):
Prodotto standard (s) a cui conformit della direttiva del Consiglio (s) dichiarato:
EMC - 2014/30 / UE "Compatibilit elettromagnetica (EMC)":
(Emissioni) EN 55032:2015 (immunit) EN 55024: 2010, EN 301 489-1 v1.9.2 (2011-09), EN 301 489-17 V2.2.1 (2012-09), EN 61000-3-2: 2006 + A1: 2009 + A2: 2009 e EN 61000-3-3: 2008 Sicurezza - 2014/35/EU "Direttiva bassa tensione (LVD)":
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 Radio - 2014/53 / Direttiva sulle apparecchiature radio dell'UE (RED):
EN 300 328 V2.1.1 (2016-11), EN 301 893 V2.1.1 (2017-05), EN 301 489-1 V2.1.1 (2017-02), EN 301 489-17 V3.1.1 (2017-02) & EN 50385:2002 RoHS - 2011/65 Limitazione / UE dell'uso di determinate sostanze pericolose nelle apparecchiature elettriche ed elettroniche (AEE) e RAEE - 2002/96 / CE sui rifiuti di apparecchiature elettriche ed elettroniche (AEE). I sottoscritti, dichiariamo che l'apparecchiatura specificata in precedenza conforme alle direttive e norme di cui sopra. Data di pubblicazione: TBD Rappresentante legale Firma Roger Midgley Suor Conformit alle normative Ingegnere Conformidad Europea (Spanish) La conformidad de los equipos con las siguientes pautas es atestiguado por la aplicacin de la marca CE. Declaracin de conformidad CE Control4 EMEA LIMITED Sulton-EN-EL BOSQUE YORK YO61 IET, REINO UNIDO 802.11ac 2x2 Wave 2 Access Point Pakedge WA-2200-1 & WA-2200-C-1 Control4 CORPORACIN 11734 S. ELECCIN Road Suite 200 SALT LAKE CITY UT 84020 EE.UU. Nombre del fabricante:
Direccin del fabricante:
UE Nombre Representante:
Direccin Representante de la UE: Tema 3., VERDE PARQUE EMPRESARIAL CENTRO Nombre (s) del producto:
Marca:
Modelo (s):
Producto estndar (s) a la que la conformidad de la Directiva del Consejo (s) se declara:
EMC - 2014/30 / UE "Directiva de compatibilidad electromagntica (EMC)":
(Emisiones) EN 55032:2015 (inmunidad) EN 55024: 2010, EN 301 489-1 v1.9.2 (2011-09), EN 301 489-17 V2.2.1 (2012-09), EN 61000-3-2: 2006 + A1: 2009 + A2: 2009 e EN 61000-3-3: 2008 Seguridad - 2014/35/EU "Directiva de Baja Tensin (LVD)":
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 Radio - 2014/53 / Directiva de Equipos de Radio de la UE (RED):
EN 300 328 V2.1.1 (2016-11), EN 301 893 V2.1.1 (2017-05), EN 301 489-1 V2.1.1 (2017-02), EN 301 489-17 V3.1.1 (2017-02) & EN 50385:2002 RoHS - 2011/65 restriccin del uso de ciertas sustancias peligrosas en equipos electrnicos (AEE) y WEEE elctricos y / UE - 2002/96 / CE de Residuos de Aparatos Elctricos (AEE) y electrnicos. Nosotros, los abajo firmantes, declaramos por la presente que el equipo anteriormente mencionado se ajusta a las directrices y estndares anteriores. Fecha de emisin: TBD Representante legal Firma Roger Midgley Ingeniero Sr. Cumplimiento de la normativa Conformidade Europeia (Portuguese) Conformidade do equipamento com as diretrizes abaixo atestada pela aplicao da marca CE. Declarao de Conformidade CE Control4 EMEA LIMITED Sulton-ON-THE FOREST YO61 IET YORK, REINO UNIDO 802.11ac 2x2 Wave 2 Access Point Pakedge WA-2200-1 & WA-2200-C-1 Control4 CORPORATION 11734 S. ELEIO ROAD SUITE 200 SALT LAKE CITY UT 84020 EUA Nome do fabricante:
Do fabricante Endereo:
Representante da UE Nome:
Representante da UE Endereo: UNIT3, GREEN PARK CENTRO DE NEGCIO Nome (s) produto:
Marca:
Modelo (s):
Padro do produto (s) a que Conformidade da Directiva do Conselho (s) declarado:
EMC - 2014/30 / UE "Compatibilidade Electromagntica (EMC)":
(Emisses) EN 55032:2015 (Imunidade) EN 55024: 2010, EN 301 489-1 v1.9.2 (2011-09), EN 301 489-17 V2.2.1 (2012-09), EN 61000-3-2 : 2006 + A1: 2009 + A2: 2009 e EN 61000-3-3: 2008 Segurana - 2014/35/EU "Directiva de Baixa Tenso (LVD)":
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 Rdio - 2014/53 / UE Directiva equipamento de rdio (RED):
EN 300 328 V2.1.1 (2016-11), EN 301 893 V2.1.1 (2017-05), EN 301 489-1 V2.1.1 (2017-02), EN 301 489-17 V3.1.1 (2017-02) & EN 50385:2002 RoHS - 2011/65 / UE Restrio do Uso de Certas Substncias Perigosas em Equipamentos Elctricos e Electrnicos (EEE) e WEEE - 2002/96 / EC de Resduos de Equipamentos Elctricos e Electrnicos (EEE). Ns, abaixo-assinado, declaro que o equipamento especificado acima est em conformidade com as diretrizes e normas acima referidas. Data de Emisso: TBD Representante legal Assinatura Roger Midgley Sr. Engenheiro Conformidade Regulatria
1 2 3 | User manual-1 | Users Manual | 312.81 KiB | / August 06 2019 |
Regulatory Compliance & Safety Information for Control4 Model WA-2200, WA-2200-C, WA-2200-1 & WA-2200-C-1 Electrical Safety Advisory Scurit lectrique consultatif Important Safety Instructions Consignes de scurit importantes Read the safety instructions before using this product. Lisez les consignes de scurit avant d'utiliser ce produit. 1. Read these instructions. 1. Lisez ces instructions. 2. Keep these instructions. 2. Conservez ces instructions. 3. Heed all warnings. 3. Respectez tous les avertissements. 4. Follow all instructions. 4. Suivez toutes les instructions. 5. Do not use this apparatus near water. 5. Ne pas utiliser cet appareil prs de l'eau. 6. Clean only with dry cloth. 6. Nettoyez-le uniquement avec un chiffon sec. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 7. Ne pas bloquer les ouvertures de ventilation. Installer conformment aux instructions du fabricant. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8. Ne pas installer prs de sources de chaleur telles que des radiateurs, registres de chaleur, poles, ou autres appareils (incluant les amplificateurs) qui produisent de la chaleur. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 9. Ne pas contourner le dispositif de scurit de la fiche polarise ou de mise la terre. Une fiche polarise possde deux lames dont une plus large que l'autre. Une fiche de terre a deux lames et une troisime broche de terre. La lame large ou la troisime broche est fournie pour votre scurit. Si la fiche fournie ne s'adapte pas votre prise, consultez un lectricien pour le remplacement de la prise obsolte. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 10. Protgez le cordon d'alimentation ne soit pitin ou pinc, en particulier au niveau des fiches, des prises et au point o il sort de l'appareil. 11. Only use attachments/accessories specified by the manufacturer. 11. Utilisez uniquement des fixations / accessoires spcifis par le fabricant. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 12. Utilisez uniquement avec le chariot, le socle, le trpied, le support ou la table spcifis par le fabricant ou vendu avec l'appareil. Lorsque vous utilisez un chariot, soyez prudent lorsque vous dplacez l'ensemble chariot / appareil pour viter des blessures dues au renversement. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 13. Dbranchez cet appareil pendant les orages ou lorsqu'il n'est pas utilis pendant de longues priodes de temps. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 14. Confiez toutes les rparations un personnel qualifi. Une rparation est ncessaire lorsque l'appareil a t endommag de quelque faon que ce soit le cordon d'alimentation ou la fiche est endommag, du liquide a t renvers ou si des objets sont tombs dans l'appareil, l'appareil a t expos la pluie ou l'humidit, ne fonctionne pas normalement, ou s'il est tomb. 15. This equipment uses AC power which can be subjected to electrical surges, typically lightning transients which are very destructive to customer terminal equipment connected to AC power sources. The warranty for this equipment does not cover damage caused by electrical surge or lightning transients. To reduce the risk of this equipment becoming damaged it is suggested that the customer consider installing a surge arrestor. 15. Cet quipement utilise la puissance AC qui peuvent tre soumis des surtensions lectriques, la foudre gnralement transitoires qui sont trs destructives envers les quipements terminaux connects des sources d'alimentation CA. La garantie de cet appareil ne couvre pas les dommages causs par les surtensions lectriques ou transitoires de foudre. Pour rduire le risque de cet quipement devient endommag, il est suggr que le client envisager l'installation d'un limiteur de surtension. 16. To completely disconnect unit power from the AC mains, remove the power cord from the appliance coupler and/or turn off the circuit breaker. To reconnect power, turn on the circuit breaker following all safety instructions and guidelines. The circuit breaker shall remain readily accessible. 16. Pour dbrancher compltement l'alimentation secteur du rseau secteur, retirez le cordon d'alimentation du coupleur de l'appareil et / ou teignez le disjoncteur. Pour reconnecter l'alimentation, allumez le disjoncteur en suivant toutes les consignes et consignes de scurit. Le disjoncteur doit tre facilement accessible. 17. This product relies on the buildings installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 20A. 17. Ce produit repose sur l'installation des btiments pour les courts-circuits (surintensit) de protection. Assurez-vous que le dispositif de protection est assigne ne dpassant pas:
20A. 18. CAUTION: As with all batteries, there is a risk of explosion or personal injury if the battery is replaced by an incorrect type. Dispose of used battery according to the instructions of the battery manufacturer and applicable environmental guidelines. Do not open, puncture or incinerate the battery, or expose it to conducting materials, moisture, liquid, fire or heat above 54 C or 130 F. 18. ATTENTION: Comme avec toutes les batteries, il ya un risque d'explosion ou de blessure si la batterie est remplace par un type incorrect. liminez les batteries usages selon les instructions du fabricant de la batterie et applicables des directives environnementales. Ne pas ouvrir, percer ou incinrer la batterie, ou de l'exposer des matriaux conducteurs, de l'humidit, du liquide, un incendie ou une temprature suprieure 54 C ou 130 F. 19. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. 19. N'introduisez jamais d'objets d'aucune sorte dans ce produit travers les fentes du botier car ils pourraient toucher des points de tension dangereux ou court-circuiter des pices qui pourraient entraner un incendie ou un choc lectrique. 20. This product can interfere with electrical equipment such as tape recorders, TV sets, radios, computers and microwave ovens if placed in close proximity. 20. Ce produit peut interfrer avec des appareils lectriques tels que les magntophones, tlviseurs, radios, ordinateurs et fours micro-ondes si placs proximit. The lightning flash and arrow head within the triangle is a warning sign alerting you of dangerous voltage inside the product L'clair et la flche dans le triangle est un signe d'alerte pour vous avertir d'une tension dangereuse l'intrieur du produit Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. Attention: Pour rduire le risque de choc lectrique, ne pas retirer le couvercle
(ou l'arrire). Aucune pice rparable par l'utilisateur. Confiez l'entretien un personnel qualifi. The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. Le point d'exclamation dans un triangle est un signe d'avertissement vous signale des instructions importantes accompagnant le produit. See marking on bottom / back of product Voir le marquage sur les bas / dos du produit Warning!: To reduce the risk of electrical shock, do not expose this apparatus to rain or moisture AVERTISSEMENT! Pour rduire le risque de choc lectrique, n'exposez pas cet appareil la pluie ou l'humidit. Save these instructions Conservez ces instructions USA & Canada Compliance FCC Part 15, Subpart B & IC Unintentional Emissions Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver Increase the separation between the equipment and receiver. is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules and ISEDs licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme la section 15 des rgles de la FCC et ISEDs aux RSS exempts de licence d'ISED. Son utilisation est soumise aux deux conditions suivantes: (1) Cet appareil ne doit pas causer dinterfrences nuisibles et (2) cet appareil doit accepter toutes les interfrences reues, y compris celles pouvant entraner un fonctionnement non souhait. IMPORTANT! Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. IMPORTANT! Tous les changements ou modifications pas expressment approuvs par la partie responsable de la conformit ont pu vider lautorit de lutilisateur pour actionner cet quipement. Canada Warning Statement:
CAN ICES-3 (B)/NMB-3(B) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Ce produit rpond aux spcifications techniques applicables l'innovation, Science et Dveloppement conomique Canada. FCC Part 15, Subpart C / RSS-247 Intentional Emissions Interference Statement Compliance of this equipment is confirmed by the following certification numbers that are placed on the equipment:
Notice: The term FCC ID: and IC: before the certification number signifies that FCC and Industry Canada technical specifications were met. FCC ID: R33WA2200 IC: 7848A-WA2200 Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and
(iii) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement:
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
(ii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5725 5 850 MHz) doit tre conforme la limite de la p.i.r.e. spcifie pour l'exploitation point point et lexploitation non point point, selon le cas;
(iii) De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. FCC Partie 15, sous-partie C / RSS-247 Dclaration volontaire des missions interfrences Conformit de cet appareil est confirm par les chiffres de certification suivants qui sont placs sur l'quipement:
Avis: Le terme FCC ID:" et "IC:" devant le numro de certification signifie que les spcifications techniques de la FCC et d'Industrie Canada ont t respectes. FCC ID: R33WA2200 IC: 7848A-WA2200 Cet quipement doit tre install par des professionnels qualifis ou entrepreneurs conformment aux normes FCC partie 15.203 & IC RSS-247, Exigences d'antenne. Ne pas utiliser une antenne autre que celui fourni avec l'appareil. Cet metteur ne doit pas tre localis ou fonctionner avec d'autres antennes ou transmetteurs. Les oprations dans la bande 5.15-5.25GHz sont limites l'utilisation l'intrieur seulement. RF Radiation Exposure Statement This equipment complies with FCC RF and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body or nearby persons. Dclaration d'exposition aux radiations RF Cet quipement est conforme aux limites d'exposition aux rayonnements RF et IC de la FCC dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20 centimtres entre le radiateur et votre corps ou des personnes proches. Control4 Corporation 11734 S Election Road Draper, UT 84020 Email: rmidgley@control4.com Phone: (801) 523-3187 Europe Compliance Compliance of this equipment is confirmed by the following logo that is placed on the product ID label that is placed on the bottom of the equipment. The full text of the EU Declaration of Conformity (DoC) is available on the following pages:
This product can be put into service in all of the EU member states, European Free Trade Association
(EFTA) and EU candidate countries without any restriction. BE DE ES CY HU PL SK IS MK BG EE FR LV MT PT FI LI AL CZ IE HR LT NL RO SE NO RS DK EL IT LU AT SI UK CH TR The frequency and maximum transmitted power in EU are listed as below:
2412 - 2472 MHz: 15.0 dBm 5180 - 5240 MHz: 17.5 dBm WLAN 5GHz:
Operations in the 5.15-5.35GHz band are restricted to indoor usage only. Recycling Control4 understands that a commitment to the environment is essential for a health life and sustainable growth for future generations. We are committed to supporting the environmental standards, laws, and directives that have been put in place by various communities and countries that deal with concerns for the environment. This commitment is represented by combining technological innovation with sound environmental business decisions. WEEE Compliance Control4 is committed to meeting all requirements of the Waste Electrical and Electronic Equipment (WEEE) directive (2012/19/EC). The WEEE directive requires the manufacturers of electrical and electronic equipment who sell in EU countries: (1) label their equipment to notify customers that it needs to be recycled, and (2) provide a way for their products to be appropriately disposed of or recycled at the end of their product lifespan. For collection or recycling of Control4 products, please contact your local Control4 representative or dealer. About this Document Copyright 2018 Control4 Corporation. All rights reserved. Control4 and the Control4 logo are registered trademarks or trademarks of Control4 Corporation in the United States and/or other countries. Part Number 200-00XXX Rev A, 1/2/2019 European Compliance (English) Conformity of the equipment with the guidelines below is attested by the application of the CE mark. Manufacturers Name:
Manufacturers Address:
CE Declaration of Conformity CONTROL4 CORPORATION 11734 S. ELECTION ROAD SUITE 200 SALT LAKE CITY UT 84020 USA EU Representative Name: CONTROL4 EMEA LIMITED EU Representative Address: UNIT3, GREEN PARK BUSINESS CENTRE SULTON-ON-THE FOREST YORK YO61 IET, UNITED KINGDOM 802.11ac 2x2 Wave 2 Access Point Pakedge WA-2200-1 & WA-2200-C-1 Product Name(s):
Brand:
Model(s):
Product Standard(s) to which Conformity of the Council Directive(s) is declared:
EMC - 2014/30/EU Electromagnetic Compatibility (EMC) Directive:
(Emissions) EN 55032:2015 (Immunity) EN 55024:2010 + A1:2015, EN 61000-3-2:2014 & EN 61000-3-3:2013 Safety 2014/35/EU Low Voltage Directive (LVD):
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 Radio - 2014/53/EU Radio Equipment Directive (RED):
EN 300 328 V2.1.1 (2016-11), EN 301 893 V2.1.1 (2017-05), EN 301 489-1 V2.1.1 (2017-02), EN 301 489-17 V3.1.1 (2017-02) & EN 50385:2002 RoHS - 2011/65/EU Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment (EEE) & WEEE - 2002/96/EC Waste of Electrical and Electronic Equipment (EEE). We, the undersigned, hereby declare that the equipment specified above conforms to the above directives and standards. Date of Issue: TBD Legal Representative Signature Roger Midgley Sr. Regulatory Compliance Engineer Conformit europenne (French) Conformit de l'quipement avec les directives ci-dessous est atteste par l'apposition de la marque CE. Dclaration de conformit CE Le nom du fabricant:
Le fabricant Adresse:
Nom Reprsentant de l'UE: CONTROL4 EMEA LIMITED UE reprsentant Adresse: Unit3, GREEN PARK CENTRE D'AFFAIRES CONTROL4 CORPORATION 11734 S. LECTION Road Suite 200 SALT LAKE CITY UT 84020 USA Sulton-ON-THE FOREST YORK YO61 IET, ROYAUME-UNI 802.11ac 2x2 Wave 2 Access Point Pakedge WA-2200-1 & WA-2200-C-1 Nom (s) de produit:
Marque:
Modle (s):
Produit standard (s) dont la conformit de la directive du Conseil (s) est dclare:
EMC - 2014/30 / "compatibilit lectromagntique (CEM)" UE:
( missions) EN 55032:2015 (immunit) EN 55024:2010 + A1:2015, EN 61000-3-2:2014 & EN 61000-3-3:2013 Scurit - 2014/35/EU "Directive Basse Tension (DBT)":
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 Radio - 2014/53 / UE directive quipement radio (RED):
EN 300 328 V2.1.1 (2016-11), EN 301 893 V2.1.1 (2017-05), EN 301 489-1 V2.1.1 (2017-02), EN 301 489-17 V3.1.1 (2017-02) & EN 50385:2002 RoHS - 2011/65 / UE limitation de l'utilisation de certaines substances dangereuses dans les quipements lectriques et lectroniques (EEE) et DEEE - 2002/96 / CE Dchets d'quipements lectriques et lectroniques (EEE). Nous, soussigns, dclarons que l'quipement indiqu ci-dessus est conforme aux directives et normes ci-dessus. Date de publication TBD Reprsentant lgal Signature Roger Midgley Ingnieur de conformit rglementaire Sr. European Compliance (German) Die Konformitt mit den folgenden Richtlinien wird durch die Anwendung des CE-Kennzeichen besttigt. CE-Konformittserklrung 802.11ac 2x2 Wave 2 Access Point Pakedge WA-2200-1 & WA-2200-C-1 Control4 CORPORATION 11734 S. WAHL ROAD SUITE 200 SALT LAKE CITY UT 84020 USA Control4 EMEA LIMITED Unit3, GREEN Park Geschftszentrum Sulton-ON-THE FOREST YORK YO61 IET, VEREINIGTES K NIGREICH Name des Herstellers:
Adresse des Herstellers:
EU-Vertreter Name:
EU-Vertreter Adresse:
Produkt-Name (n):
Marke:
Modell (e):
Produkt-Norm (en), um die Konformitt der Richtlinie (n) deklariert ist:
EMC - 2014/30 / EG "Elektromagnetische Vertrglichkeit (EMV) Die Richtlinie":
(Emissionen) EN 55032:2015 (Immunitt) EN 55024:2010 + A1:2015, EN 61000-3-2:2014 &
EN 61000-3-3:2013 Sicherheit - 2014/35/EU "Niederspannungsrichtlinie (LVD)":
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 Radio - 2014/53 / EU ber Funkanlagen-Richtlinie (RED):
EN 300 328 V2.1.1 (2016-11), EN 301 893 V2.1.1 (2017-05), EN 301 489-1 V2.1.1 (2017-02), EN 301 489-17 V3.1.1 (2017-02) & EN 50385:2002 RoHS - 2011/65 / EU zur Beschrnkung der Verwendung bestimmter gefhrlicher Stoffe in Elektro- und Elektronikgerten (EEE) & WEEE - 2002/96 / EG Richtlinie ber Elektro- und Elektronikgerten (EEE). Wir, die Unterzeichneten, erklren hiermit, dass das oben angegebene Gert zu den oben genannten Richtlinien und Normen. Ausstellungsdatum: TBD Gesetzlicher Vertreter Stempel, Unterschrift Roger Midgley Sr. Regulatory Compliance-Ingenieur Conformit Europea (Italian) Conformit del materiale con le linee guida qui sotto attestata dall'applicazione del marchio CE. Dichiarazione di conformit CE Sulton-ON-THE FOREST YORK YO61 IET, REGNO UNITO 802.11ac 2x2 Wave 2 Access Point Pakedge WA-2200-1 & WA-2200-C-1 Control4 CORPORATION 11734 S. ELEZIONI STRADA SUITE 200 SALT LAKE CITY UT 84020 Stati Uniti d'America Nome del produttore:
Indirizzo del produttore:
UE Nome Rappresentante: Control4 EMEA LIMITED UE Indirizzo Rappresentante: Unit3, GREEN PARK BUSINESS CENTRE Nome del prodotto (s):
Marca:
Modello (s):
Prodotto standard (s) a cui conformit della direttiva del Consiglio (s) dichiarato:
EMC - 2014/30 / UE "Compatibilit elettromagnetica (EMC)":
(Emissioni) EN 55032:2015 (immunit) EN 55024: 2010, EN 301 489-1 v1.9.2 (2011-09), EN 301 489-17 V2.2.1 (2012-09), EN 61000-3-2: 2006 + A1: 2009 + A2: 2009 e EN 61000-3-3: 2008 Sicurezza - 2014/35/EU "Direttiva bassa tensione (LVD)":
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 Radio - 2014/53 / Direttiva sulle apparecchiature radio dell'UE (RED):
EN 300 328 V2.1.1 (2016-11), EN 301 893 V2.1.1 (2017-05), EN 301 489-1 V2.1.1 (2017-02), EN 301 489-17 V3.1.1 (2017-02) & EN 50385:2002 RoHS - 2011/65 Limitazione / UE dell'uso di determinate sostanze pericolose nelle apparecchiature elettriche ed elettroniche (AEE) e RAEE - 2002/96 / CE sui rifiuti di apparecchiature elettriche ed elettroniche (AEE). I sottoscritti, dichiariamo che l'apparecchiatura specificata in precedenza conforme alle direttive e norme di cui sopra. Data di pubblicazione: TBD Rappresentante legale Firma Roger Midgley Suor Conformit alle normative Ingegnere Conformidad Europea (Spanish) La conformidad de los equipos con las siguientes pautas es atestiguado por la aplicacin de la marca CE. Declaraci n de conformidad CE Control4 EMEA LIMITED Sulton-EN-EL BOSQUE YORK YO61 IET, REINO UNIDO 802.11ac 2x2 Wave 2 Access Point Pakedge WA-2200-1 & WA-2200-C-1 Control4 CORPORACI N 11734 S. ELECCI N Road Suite 200 SALT LAKE CITY UT 84020 EE.UU. Nombre del fabricante:
Direccin del fabricante:
UE Nombre Representante:
Direccin Representante de la UE: Tema 3., VERDE PARQUE EMPRESARIAL CENTRO Nombre (s) del producto:
Marca:
Modelo (s):
Producto estndar (s) a la que la conformidad de la Directiva del Consejo (s) se declara:
EMC - 2014/30 / UE "Directiva de compatibilidad electromagntica (EMC)":
(Emisiones) EN 55032:2015 (inmunidad) EN 55024: 2010, EN 301 489-1 v1.9.2 (2011-09), EN 301 489-17 V2.2.1 (2012-09), EN 61000-3-2: 2006 + A1: 2009 + A2: 2009 e EN 61000-3-3: 2008 Seguridad - 2014/35/EU "Directiva de Baja Tensi n (LVD)":
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 Radio - 2014/53 / Directiva de Equipos de Radio de la UE (RED):
EN 300 328 V2.1.1 (2016-11), EN 301 893 V2.1.1 (2017-05), EN 301 489-1 V2.1.1 (2017-02), EN 301 489-17 V3.1.1 (2017-02) & EN 50385:2002 RoHS - 2011/65 restricci n del uso de ciertas sustancias peligrosas en equipos electr nicos (AEE) y WEEE elctricos y / UE - 2002/96 / CE de Residuos de Aparatos Elctricos (AEE) y electr nicos. Nosotros, los abajo firmantes, declaramos por la presente que el equipo anteriormente mencionado se ajusta a las directrices y estndares anteriores. Fecha de emisin: TBD Representante legal Firma Roger Midgley Ingeniero Sr. Cumplimiento de la normativa Conformidade Europeia (Portuguese) Conformidade do equipamento com as diretrizes abaixo atestada pela aplicao da marca CE. Declarao de Conformidade CE Control4 EMEA LIMITED Sulton-ON-THE FOREST YO61 IET YORK, REINO UNIDO 802.11ac 2x2 Wave 2 Access Point Pakedge WA-2200-1 & WA-2200-C-1 Control4 CORPORATION 11734 S. ELEI O ROAD SUITE 200 SALT LAKE CITY UT 84020 EUA Nome do fabricante:
Do fabricante Endereo:
Representante da UE Nome:
Representante da UE Endereo: UNIT3, GREEN PARK CENTRO DE NEG CIO Nome (s) produto:
Marca:
Modelo (s):
Padro do produto (s) a que Conformidade da Directiva do Conselho (s) declarado:
EMC - 2014/30 / UE "Compatibilidade Electromagntica (EMC)":
(Emiss es) EN 55032:2015 (Imunidade) EN 55024: 2010, EN 301 489-1 v1.9.2 (2011-09), EN 301 489-17 V2.2.1 (2012-09), EN 61000-3-2 : 2006 + A1: 2009 + A2: 2009 e EN 61000-3-3: 2008 Segurana - 2014/35/EU "Directiva de Baixa Tenso (LVD)":
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 Rdio - 2014/53 / UE Directiva equipamento de rdio (RED):
EN 300 328 V2.1.1 (2016-11), EN 301 893 V2.1.1 (2017-05), EN 301 489-1 V2.1.1 (2017-02), EN 301 489-17 V3.1.1 (2017-02) & EN 50385:2002 RoHS - 2011/65 / UE Restrio do Uso de Certas Substncias Perigosas em Equipamentos Elctricos e Electr nicos (EEE) e WEEE - 2002/96 / EC de Resduos de Equipamentos Elctricos e Electr nicos (EEE). Ns, abaixo-assinado, declaro que o equipamento especificado acima est em conformidade com as diretrizes e normas acima referidas. Data de Emisso: TBD Representante legal Assinatura Roger Midgley Sr. Engenheiro Conformidade Regulatria
1 2 3 | QSG | Users Manual | 680.11 KiB |
WA-2200, WA-2200-1 802.11ac 2x2 Wave 2 Access Point BakPak Lite QUICK START GUIDE WA-2200 features 802.11ac 2x2 Wave 2 Access Point Built-in 22 internal antennas Powered by PoE (or 12VDC 1A power adapter, not included) 1 Gigabit LAN port BakPak Lite built in: Manage device from the standard BakPak interface For more detailed instructions, refer to the WA-2200 User Guide
(pkdge.co/wa2200-ug). System requirements Windows or Mac PC with an Ethernet interface Default settings and credentials Operation mode: Access Point IP address: If no DHCP server is detected, the default IP address will be automatically set to 192.168.1.21. Username/Password (default): admin/password SSIDs (default): Pakedge-Main (5 GHz), Pakedge-Alt (2.4 GHz), security/
password: WPA2-PSK/pakedgewireless Guest SSIDs (default): PakedgeGuest2.4 and PakedgeGuest5, security/password:
WPA2/pakedgeguest Transmit power: Factory default transmit power is 13dBm for 2.4GHz and 18 dBm for 5 GHz. 2 2 Wall mounting 1 Tape the included template against the desired mounting location, then mark the places to drill mounting holes and insert screws. Powering up The access point can be powered only by either PoE or the optional AC power adapter
(not included). To power up the access point:
1 Connect power using a POE injector or POE switch, or with the optional AC power adapter (not included). The access point should now be up and running with its default settings. It does not need to be configured to be functional. To make changes to the SSID and security settings, you need to access the AP using a web browser. 3 3 Logging in to the access point To log in to the access point:
1 Connect the access point to your PoE switch with an Ethernet cable. 2 Log in to your router to find the IP address assigned to the access point under the DHCP Client Table, then enter into a web browser (or click) that IP address to open the access point interface. The Log In page opens. Tip: If you do not have a router in your network that distributes IP addresses, you can try to access the access point through its default IP address of 192.168.1.21. 3 In the username box, type admin. In the password box, type password, then click Log in. The first time you log in, the Configure page opens. Registering your device with BakPak Lite You can connect your access point to your existing BakPak account or create a new account to manage all of your BakPak network management agents. To register your device to your BakPak account:
1 To the right of the This product is not managed by BakPak message, click Click here to enroll. The BakPak Registration page opens. 2 Follow the on-screen instructions to complete your device registration. 4 Enter and verify a new password (required) before continuing, then click Apply to complete the setup. Caution: For international models, you must change the Country Code (a drop-down list defaulting to GB - United Kingdom), to the specific country of operation. 4 4 5 5 Adding more WA Series APs to the BakPak site To manage and set up more than one WA-2200, a BakPak site must be created to manage them as a group. To create a BakPak site:
1 Log in to your BakPak account, then click Add Site to create a site. 2 In the Management Agent list, select the first WA-2200, complete the site information, then click OK. Adding WA Series APs to the site To add APs and provision them with the existing configuration:
1 Make sure that the first AP is already configured, and that the additional APs are turned on for at least five minutes and connected to your network. 2 In BakPak, select the new WA-2200 site, then click Device Discovery. Any additional WA Series APs are discovered and appear as tiles that can be selected (already selected by default). The site is created, and the WA-2200 will act as the master AP for adding more WA Series APs to the site. 3 Click OK. The APs are added to the site. 4 To apply the first APs settings to the new APs, in the BakPak site select the first AP you set up (on the previous page), then complete the site information and click Save & Apply Multiple at the bottom. The settings are copied to the APs. 6 6 7 7 Technical Support For technical help:
www.pakedge.com/portal support@pakedge.com
(650) 385-8703 For regulatory information:
www.pakedge.com/regulatory 11734 S. Election Road Draper, UT 84020 Main: (650) 385-8700 Fax: (650) 685-5520 www.pakedge.com sales@pakedge.com 2018 Control4. All rights reserved. Latest version at pkdge.co/wa2200-qsg 200-00575-B 2018-12-04 MS
1 2 3 | User manual | Users Manual | 682.38 KiB |
WA-2200 Series WA-2200, WA-2200-1, WA-2200-C, WA-2200-C-1 802.11ac 2x2 Wave 2 Access Point User Guide WA-2200 Series User Guide Contents Regulatory notices ...................................................................................................................................................................... 1 Introduction ................................................................................................................................................................................... 3 System requirements ................................................................................................................................................................ 3 Hardware installation ................................................................................................................................................................ 3 Default settings and credentials .................................................................................................................................. 3 First-time login ............................................................................................................................................................................. 3 Configure ......................................................................................................................................................................................... 4 Overview ......................................................................................................................................................................................... 5 Connections ................................................................................................................................................................................... 6 Backup/Restore ........................................................................................................................................................................... 6 Logs ................................................................................................................................................................................................... 7 Advanced ........................................................................................................................................................................................ 7 Device Settings .................................................................................................................................................................... 7 LAN Settings ......................................................................................................................................................................... 8 Wireless Settings ................................................................................................................................................................. 8 Access Control ..................................................................................................................................................................... 11 Firmware .................................................................................................................................................................................. 11 BakPak Lite .................................................................................................................................................................................... 12 BakPak Lite ............................................................................................................................................................................ 12 Reset to factory default settings ....................................................................................................................................... 13 Reset using the interface ............................................................................................................................................... 13 Reset using the physical RESET button ................................................................................................................. 13 WA-2200 Series User Guide Regulatory notices FCC notice:
Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. FCC Class B:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected. Consult the dealer or an experienced radio/TV technician for help. ISED (IC):
This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Ce produit rpond aux spcifications techniques applicables l'innovation, Science et Dveloppement conomique Canada. ISED (IC):
This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. 1 WA-2200 Series User Guide ISED (IC) 5G caution Operations in the 5.15-5.25 Ghz band are restricted to indoor usage only. Le fonctionnement sur la bande 5,155,25 Ghz est limit une utilisation intrieure uniquement. FCC/ISED (IC) RF Radiation Exposure Statement: (For MPE report) This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. ISED (IC):
This device complies with the ISED radiation exposure limit set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body. Cet quipement est conforme avec l'exposition aux radiations ISED dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis une distance minimum de 20 cm entre le radiateur et votre corps. CAN ICES-3 (B)/NMB-3(B) EU Countries Intended for Use The ETSI version of this device is intended for home and office (5150-5350MHz) use in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, the Netherlands, Portugal, Spain, Sweden, and the United Kingdom. Control4 Corporation 11734 S Election Road Draper, UT 84020 Email: rmidgley@control4.com Phone: (801) 523-3187 2 WA-2200 Series User Guide Introduction As the central component of your wireless network, the WA-2200 802.11ac 2x2 Wave 2 Access Point provides you with high-speed, high-range wireless 8012.11ac networking. The AP broadcasts on both the 2.4 GHz and 5 GHz bands so that select devices can choose their preferred source of wireless connectivity, improving the overall stability, reliability, and performance of the wireless network. System requirements Minimum system requirements:
PoE switch or injector, or an AC power adapter (not included) A computer with an Ethernet port (for first AP setup). Hardware installation For hardware installation and first-time startup instructions, see the Quick Start Guide found in the box. Default settings and credentials IP address: IP will be automatically assigned by router if a DHCP server is detected or, if no DHCP server is detected, the default IP address will be automatically set to 192.168.1.21. Username/Password (default): admin/password SSIDs (default): Pakedge_Main (5 GHz) and Pakedge_Alt (2.4 GHz) Security/password: WPA2-PSK/pakedgewireless Guest SSIDs (default): PakedgeGuest2.4 and PakedgeGuest5, security/password:
WPA2/pakedgeguest Transmit power: 13 dBm for 2.4 GHz and 18 dBm for 5 GHz. First-time login The first time you log in, you are brought to the Configure tab. Here you can change your username and password (strongly recommended), specify the devices network name and physical location, set the Country Code, and create or hide wireless networks. For BakPak Lite setup instructions, see the WA-2200 Quick Start Guide. Note: For APs sold in the U.S. and Israel, the Country Code will be preconfigured and locked. For units sold in the rest of the world, the Country Code will be blank and must be configured on the Configure tab during first-time setup. 3 WA-2200 Series User Guide Configure The Configure tab allows you to change the most common AP settings in one screen. This is the default tab that displays after login. Username and Password: The first time you log in, you should change these from the defaults (admin and password) to new credentials. Friendly Device Name: Give the AP a descriptive name to identify it on its web interface screen and in BakPak. Device Location: Describe the physical location of the AP here. Device Note: Add any other notes here, such as date of installation and the technician name. Time Zone: Select the time zone used for the APs event logs. Country Code: Select the country where the AP is installed. Note: For APs sold in the U.S. and Israel, the Country Code will be preconfigured and locked. For units that are sold in the rest of the world, the Country Code will be blank and must be configured on the Configure tab. LAN Settings:
IP Network Settings: Select the method used for assigning IP addresses
(DHCP or Static). IP Address: For a static IP network, enter the APs IP address here. For a DHCP network, this field is read-only. Subnet Mask: For a static IP network, enter the APs subnet mask here. For a DHCP network, this field is read-only. Gateway: For a static IP network, enter the APs Gateway address here. For a DHCP network, this field is read-only. 4 WA-2200 Series User Guide DNS Settings:
DNS Server n (servers IP address): For a static IP network, enter up to two DNS server IP addresses here. For a DHCP network, these fields are read-only. 5 GHz Networks and 2.4 GHz Networks, and guest networks: Enter an SSID
(wireless network name), the authentication type to use, the WiFi password, and the VLAN this wireless network is associated with. To view the password thats entered, click the eyeball icon. Select Hide to not broadcast the wireless networks SSID. 5 GHz Guest Network and 2.4 GHz Guest Network: Enter an SSID (wireless network name), the authentication type to use, and the WiFi password. To view the password thats entered, click the eyeball icon. Select Hide to not broadcast the wireless networks SSID. Overview The Overview tab gives you a quick view of the APs status and critical settings. Notifications: System notifications at the very top of the tab. This example shows a firmware update is available. Name: The device name (assigned in the Configure tab) appears here. IP address and MAC address: The devices assigned IP address and unique MAC address is shown here. Update Firmware: Click to open the Update Firmware screen (also accessible under the Advanced tab). The screen also displays the firmwares release notes. Software Reset: Click to restart (power cycle) the AP. It happens immediately, with no confirmation dialog. Network information: Displays the number of wireless network SSIDs and the number of channels used by each. Services: Displays the status of current services and settings and indicates with an icon whether the service or setting is optimally configured. 5 WA-2200 Series User Guide Connections The Connections tab displays a list of connected wireless devices. Click any column head to sort the list by that field. Available fields are:
Hostname IP Address MAC Address Manufacturer Connected To Strength Band Duration TX/RX Backup/Restore The Backup/Restore tab allows you to save a configuration (backup) and restore the configuration file. 6 WA-2200 Series User Guide Save Configuration: Click to save a file that contains all of this APs settings. Choose File: Click to select a saved configuration backup file to use for restoring settings. Restore: Click to restore AP settings using the selected configuration backup file. Logs The Logs tab displays a record of system events effected by the AP. The events are categorized and sortable by severity, timestamp, and details. Enable Remote Syslog to save the logs on another network. Youll also need to specify the remote Syslog server IP address and port. Download Detailed Logs: Click to download more verbose descriptions of the logged events. Advanced Device Settings Click this tile to configure LED settings, change the hostname or factory defaults, or to access diagnostic tools. LEDs: Select to enable (or deselect to disable) the APs LEDs. Hostname: Enter the hostname here. Factory Default: Click to restore factory default settings. 7 WA-2200 Series User Guide Diagnostic Tools Ping: Select to ping a device at the indicated address. Traceroute: Select to run a traceroute to the indicated address. LAN Settings Click this tile to configure the advanced LAN port settings, such as management VLAN and STP. Management VLAN: Click this toggle to enable the management VLAN. VLAN ID: Enter the VLAN ID the AP is associated with. Spanning Tree Protocol: Click this toggle to enable spanning tree protocol, then select Priority to change the priority from its default (32768). The lower the priority, the more likely the switch is to become the root bridge. (STP is changed in increments of 4,096.) Wireless Settings Click this tile to configure advanced WiFi radio settings such as channel, power, RF scan, and roaming features. 8 WA-2200 Series User Guide Wireless Settings Band Steering: Band steering steers 5 GHz-capable clients to that frequency. By enabling this function, the 2.4 GHz SSID and settings will be copied to the 5 GHz band. RF Scan: Click to perform an automatic site survey of RF signals. The AP will scan the channels for connected devices and will then display them in a table. 5 GHz and 2.4 GHz Radio Settings Enable: Click this toggle to enable this WiFi radio band. Operation Mode: Both the 2.4 and the 5 GHz bands have the following operating modes:
Access Point: Standard mode of operation. Allows a wireless connection to the LAN. WDS Root: The AP with this mode set will be the root device that APs configured with WDS Repeater and WDS Bridge will connect to. WDS Bridge: This mode allows the AP to connect to a WDS Root Access Point. This mode takes in the SSID broadcasted by the WDS Root Access Point and turns it into Ethernet connectivity for client devices. WDS Repeater: This mode allows the AP to connect to a WDS Root Access Point. This setting will take the SSID broadcasted by the WDS Root Access Point and rebroadcast it to end-user devices. Additional WDS Bridge and WDS Repeater settings:
WDS Root Access Point BSSID:
WDS Root Access Point SSID:
Wireless Mode: Choose the setting that corresponds to the type of wireless clients connected to your network. If you arent sure which type of clients will access the wireless networks, we recommend you keep the default settings. Channel Width: Select the channel width for the selected channel to use. By default, its set to HT 20 MHz (when using 2.4 GHz) and HT 80 MHz (when using 5 GHz). Selecting 40 MHz on the 2.4 GHz band is possible, but not recommended, because it will also increase the risk of impacting wireless performance. We recommend keeping the 2.4 GHz radio set to 20 MHz and using only channel 1, 6, or 11, because they are the only three non-overlapping channels. Channel: Using the default setting (Auto), the AP automatically selects the channel with best performance for the wireless network. To select a channel manually, click the drop-down list and select a channel. The channel options available depend on the Country Code selected. Transmit Power Level: The power depends on the distance of the devices in your wireless network. You can use this feature to increase or decrease the coverage area; however, we do not recommend changing this setting unless a professional site survey is conducted. Contact your network administrator for help. 9 WA-2200 Series User Guide Auto: This setting adjusts the power of the AP based on the distance to the furthest client device. 11 dBm (13mW) 24 dBm (252mW): These are static power settings. The AP will broadcast at the selected power level. Multicast Handling: Enable the Convert to Multicast toggle to enhance the video/audio quality when streaming multicast content to multiple devices over WiFi. When enabled, all the multicast traffic is converted to unicast, which increases the delivery speed to individual devices. This feature is not recommended if the multicast group exceeds 10 devices. Roaming Fast BSS transition (802.11r): IEEE 802.11r standard for fast roaming reduces the authentication time when clients roam from one AP to the other. This feature is beneficial for video streaming and voice application. 801.11r requires WPA2/AES encryption in order to work. Note: The roaming behavior depends on clients. To obtain full benefit from fast roaming, wireless clients need to support 802.11r fast roaming standard. It is not recommended to enable both band steering and fast roaming features, which will cause some incompatibility issues. Client Reject RSSI: Helps with sticky clients that dont reliably roam to the closest AP. By enabling this feature, the AP continuously monitors the stations received signal and will de-authenticate the client when the RSSI falls below the user-defined Client Reject RSSI Value threshold. This setting can be configured independently on 2.4 GHz and 5 GHz radios. Guest Network Client IP Assignment DHCP: Select Internal or External. Starting IP Address: This is the beginning of the DHCP range used on the guest network. If you have multiple APs, you can give them the same DHCP range because the guest network of each AP will be independent of each other. Ending IP Address: This is the last IP address available on the DHCP range. Subnet Mask: Select the class of the guest network. 255.255.255.0 is the standard setting and is selected by default. GW IP Address: Enter the Gateway IP address DNS server IP address: The DNS Server IP can be set to an external DNS or to the routers IP address if the router provides a DNS server. 10 WA-2200 Series User Guide Access Control Click this tile to set up access control for connected clients. To add a client for access control, click Add, then select the client and click Apply. The client and its identifying information are added to the Access Control list. Click any column head to sort the list by that field. Available fields are:
Hostname IP Address MAC Address Remove Firmware Click this tile to access cloud and local firmware upgrades. 11 WA-2200 Series User Guide If your firmware is up to date, this screen shows your current firmware version and provides a link for that firmwares release notes. If a firmware update is available, this screen also shows the update version and the updates release notes. Click Upgrade to update the firmware from the cloud. BakPak Lite BakPak Lite is designed to provide remote cloud monitoring and configuration to the AP. Using BakPak, you can remotely monitor and configure your customers AP without requiring a truck roll or a VPN session to the customers network. In just a few clicks, register your AP with your new or existing BakPak account. Registration is a two-step process where you register the Management Agent in BakPak, and then you link the management agent to an existing site or create a new site. BakPak Lite The AP has BakPak Lite built in, which means it can remotely monitor other WE Series APs via BakPak. After the AP has been enrolled in BakPak, you can access it from anywhere in the world by using the BakPak app or the web interface at mybakpak.com. If you see this message bar at the top of your access points web interface, the AP is not yet enrolled in BakPak. To enroll the AP in BakPak:
1. On the message bar, click Click here to enroll. You are automatically redirected to mybakpak.com. 2. Log in with your BakPak credentials or create a new admin account. When you are logged in, the serial number and MAC address will be automatically populated on your BakPak account. To log in and view a site using the web interface:
In a web browser, log in to mybakpak.com. 1. 2. Under Sites, click Manage. A list of BakPak and BakPak Lite sites opens. 3. Click the site you want to access, then click the BakPak Lite device that you want to manage. The sites management window expands, providing the following information:
Device information: Identifies all information about the device, including the serial number and firmware version, and has ability to reboot the wireless router remotely. SSID configuration: Configure/edit wireless information for the primary SSID and guest networks. Firmware: Applies firmware updates to the device. Events: Displays network analytics, including a log of user events, for network troubleshooting. 12 WA-2200 Series User Guide Reset to factory default settings While setting up or troubleshooting, you may need to reboot the AP or restore it to its factory default settings. Caution: Do not power off the AP during a factory reset. Reset using the interface To only restart the AP, maintaining all settings:
1. In the Overview or Connections tab, click Software Reset. The AP restarts. To reset to factory default settings, deleting all user settings:
Caution: Performing this reset will delete all of your settings on the AP. 1. Go to the Advanced tab and click Device Settings. 2. Click Factory Default, then click Yes. Reset using the physical RESET button Your AP has a recessed RESET button accessible through a pinhole next to the Ethernet port underneath the AP. To only reboot the AP, maintaining all settings:
1. While power is connected, insert a narrow, pointed object (such as a straightened paper clip) into the hole. 2. Press and release the button. To reset to factory default settings, deleting all user settings:
Caution: Performing this reset will delete all of your settings on the AP. 1. While power is connected, insert a narrow, pointed object (such as a straightened paper clip) into the hole. 2. Press and hold the button for at least ten seconds, then release it. 13 11734 Election Road Draper, UT 8402045 U.S.A Visit Us At:
www.pakedge.com Copyright 2018, Control4 Corporation. All rights reserved. Control4, Pakedge, Triad, and their logos are registered trademarks or trademarks of Control4 Corporation in the United States and/or other countries. 4Store, 4Sight, Control4 My Home, Mockupancy, and BakPak are also registered trademarks or trademarks of Control4 Corporation. Other names and brands may be claimed as the property of their respective owners. All specifications subject to change without notice. 200-00576-B WA-2200 UG-cert 2018-12-04 MS
1 2 3 | WA2200-C QSG | Users Manual | 821.39 KiB |
WA-2200-C, WA-2200-C-1 802.11ac 2x2 Wave 2 Access Point, In-Ceiling BakPak Lite QUICK START GUIDE WA-2200-C features Mounting into the bracket 1 Place the included template against the ceiling or wall at the desired location, then cut along the dotted line with a drywall saw. 2 To mount the access point into the bracket, review the visual guide that follows:
802.11ac 2x2 Wave 2 Access Point, In-Ceiling Built-in 22 internal antennas Powered by PoE (or 12VDC 1A power adapter, not included) 1 Gigabit LAN port BakPak Lite built in: Manage device from the standard BakPak interface For more detailed instructions, refer to the WA-2200 User Guide
(pkdge.co/wa2200-ug). System requirements Windows or Mac PC with an Ethernet interface Default settings and credentials Operation mode: Access Point IP address: If no DHCP server is detected, the default IP address will be automatically set to 192.168.1.21. Username/Password (default): admin/password SSIDs (default): Pakedge-Main (5 GHz), Pakedge-Alt (2.4 GHz), security/
password: WPA2-PSK/pakedgewireless Guest SSIDs (default): PakedgeGuest2.4 and PakedgeGuest5, security/password:
WPA2/pakedgeguest Transmit power: Default is 13dBm for 2.4GHz and 18 dBm for 5 GHz. 2 2 3 3 Powering up The access point can be powered only by either PoE or the optional AC power adapter
(not included). To power up the access point:
1 Connect power using a POE injector or POE switch, or with the optional AC power adapter (not included). The access point should now be up and running with its default settings. It does not need to be configured to be functional. To make changes to the SSID and security settings, you need to access the APs interface using a web browser. 4 4 5 5 Logging in to the access point To log in to the access point:
1 Connect the access point to your PoE switch with an Ethernet cable. 2 Log in to your router to find the IP address assigned to the access point under the DHCP Client Table, then enter into a web browser (or click) that IP address to open the access point interface. The Log In page opens. Tip: If you do not have a router in your network that distributes IP addresses, you can try to access the access point through its default IP address of 192.168.1.21. 3 In the username box, type admin. In the password box, type password, then click Log in. The first time you log in, the Configure page opens. Registering your device with BakPak Lite You can connect your access point to your existing BakPak account or create a new account to manage all of your BakPak network management agents. To register your device to your BakPak account:
1 In the devices Connections tab, to the right of the This product is not managed by BakPak message, click Click here to enroll. The BakPak Registration page opens. 2 Follow the on-screen instructions to complete your device registration. 4 Enter and verify a new password (required) before continuing, then click Apply to complete the setup. Caution: For international models, you must change the Country Code (a drop-down list defaulting to GB - United Kingdom), to the specific country of operation. 6 6 7 7 Adding more WA Series APs to the BakPak site To manage and set up more than one WA-2200, a BakPak site must be created to manage them as a group. To create a BakPak site:
1 Log in to your BakPak account, then click Add Site to create a site. 2 In the Management Agent list, select the first WA-2200, complete the site information, then click OK. Adding WA Series APs to the site To add APs and provision them with the existing configuration:
1 Make sure that the first AP is already configured, and that the additional APs are turned on for at least five minutes and connected to your network. 2 In BakPak, select the new WA-2200 site, then click Device Discovery. Any additional WA Series APs are discovered and appear as tiles that can be selected (already selected by default). The site is created, and the WA-2200 will act as the master AP for adding more WA Series APs to the site. 3 Click OK. The APs are added to the site. 4 To apply the first APs settings to the new APs, in the BakPak site select the first AP you set up (on the previous page), then complete the site information and click Save & Apply Multiple at the bottom. The settings are copied to the APs. 8 8 9 9 Technical Support For technical help:
www.pakedge.com/portal support@pakedge.com
(650) 385-8703 For regulatory information:
www.pakedge.com/regulatory 11734 S. Election Road Draper, UT 84020 Main: (650) 385-8700 Fax: (650) 685-5520 www.pakedge.com sales@pakedge.com 2018 Control4. All rights reserved. Latest version at pkdge.co/wa2200c-qsg 200-00577-B 2018-12-04 MS
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-07-09 | 5500 ~ 5700 | NII - Unlicensed National Information Infrastructure TX | Class II permissive change or modification of presently authorized equipment |
2 | 2019-04-24 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
3 | 2412 ~ 2462 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2019-07-09
|
||||
1 2 3 |
2019-04-24
|
|||||
1 2 3 | Applicant's complete, legal business name |
Control4
|
||||
1 2 3 | FCC Registration Number (FRN) |
0010808202
|
||||
1 2 3 | Physical Address |
11734 S. Election Road
|
||||
1 2 3 |
Draper, Utah 84020
|
|||||
1 2 3 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
t******@siemic.com
|
||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
R33
|
||||
1 2 3 | Equipment Product Code |
WA2200
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
R**** J**** M******
|
||||
1 2 3 | Title |
Sr. Regulatory Compliance Engineer
|
||||
1 2 3 | Telephone Number |
801 5******** Extension:
|
||||
1 2 3 | Fax Number |
801 5********
|
||||
1 2 3 |
r******@control4.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 07/29/2019 | ||||
1 2 3 | 06/08/2019 | |||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 3 | DTS - Digital Transmission System | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11ac 2x2 Wave 2 Access Point | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes | ||||
1 2 3 | No | |||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 3 | Original Equipment | |||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | C2PC to add DFS band via software. Power output listed is conducted. NII-1 band is restricted for indoor use. Device contains 20/40/80MHz bandwidth and is 2x2 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. | ||||
1 2 3 | Power output listed is conducted. NII-1 band is restricted for indoor use. Device contains 20/40/80MHz bandwidth and is 2x2 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. | |||||
1 2 3 | Power output listed is conducted. Device contains 20/40MHz bandwidth and is 2x2 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
A Test Lab Techno Corp.
|
||||
1 2 3 | Name |
J**** L****
|
||||
1 2 3 | Telephone Number |
886-3********
|
||||
1 2 3 |
88632******** Extension:
|
|||||
1 2 3 | Fax Number |
886-3********
|
||||
1 2 3 |
88632********
|
|||||
1 2 3 |
J******@atl-lab.com.tw
|
|||||
1 2 3 |
j******@atl-lab.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC MO | 5180 | 5240 | 0.31 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | CC MO ND | 5260 | 5320 | 0.139 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15E | CC MO ND | 5500 | 5700 | 0.149 | |||||||||||||||||||||||||||||||||||
1 | 4 | 15E | CC MO | 5745 | 5825 | 0.346 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | CC MO | 5180 | 5240 | 0.31 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | CC MO | 5745 | 5825 | 0.346 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC MO | 2412.00000000 | 2462.00000000 | 0.4390000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC