8F, No. 150, Jian Yi Road, Zhonghe District, CC&C Technologies, Inc. New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 USERS GUIDE EA-V2 Version: 1.0 Manufacturer CC&C Technologies, Inc. 1 8F, No. 150, Jian Yi Road, Zhonghe District, CC&C Technologies, Inc. New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Revision History Version Date Change Description 1.0 03/21, 2018 Initial release 2 8F, No. 150, Jian Yi Road, Zhonghe District, CC&C Technologies, Inc. New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 CONTENT Overview...................................................................................................................... 4 Features.................................................................................................................... 4 Factory Options............................................................................................................ 4 General Specification ....................................................................................................................... 5 MINI PCI EXPRESS PIN ASSIGNMENT.................................................................................. 6 Block Diagram ........................................................................................................................... 7 Mechanical ................................................................................................................... 8 3 8F, No. 150, Jian Yi Road, Zhonghe District, CC&C Technologies, Inc. New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Overview WM-8192EE is a WLAN 11n minicard(PCIE), which fully supports the features and functional compliance of IEEE 802.11e and i standards. It supports up to 150Mbps high -speed wireless network connections. It is designed to provide excellent performance with minimum power consumption and enhance the advantages of robust system and cost-effective. It is targeted at competitive superior performance, better power management applications. Features
Operates in 2.4 frequency bands Freq. 2.4 GHz Bands Frequency 2.412-2.472 GHz, 2.484 GHz
Data rates of up to 150 Mbps for 40 MHz channels
802.11e-compatible bursting
Support for the IEEE 802.11e, and i standards
BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes
WEP, TKIP, and AES hardware encryption Schemes Factory options
PCIE connector
RF output by IPEX connector TOP BOTTOM 4 8F, No. 150, Jian Yi Road, Zhonghe District, CC&C Technologies, Inc. New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 General Specification Model Name WM-8812AE Product Name 11n 1T1R minicard (PCIE) Standard 802.11b/g/n Data Transfer Rate 150Mbps 1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90,120 and maximum of Modulation Method BPSK/ QPSK/ 16-QAM/ 64-QAM/ DBPSK/ DQPSK/ CCK Frequency Band 2.4GHz ISM Band Spread Spectrum RF Output Power
(tolerance 2dBm) IEEE 802.11b: CCK (Complementary Code Keying) IEEE 802.11g/n:OFDM (Orthogonal Frequency Division Multiplexing) 17dBm 802.11b@CCK 11Mbps 15dBm 802.11g@OFDM 54Mbps 13dBm 802.11n@MCS7_HT20 13dBm 802.11n@MCS7_HT40 Operation Mode Ad hoc, Infrastructure, Soft AP Receiver Sensitivity
-82dBm 802.11b@11Mbps
-71dBm 802.11g@54MBps
-67dBm 802.11n@MCS7_BW20
-64dBm 802.11n@MCS7_BW40 OS Support Linux Security 64 bit/128 bit WEP, TKIP, AES, WPA, WPA2 WPS button for easy and secure establishment of a wireless network Interface PCIE connector RF output RF IPEX connectors Operating Temperature 0 50 C ambient temperature Storage Temperature
-10 ~ 70C ambient temperature Humidity 5 to 90 % maximum (non-condensing) Size 29.85 x 26.65 mm (L x W) 5 8F, No. 150, Jian Yi Road, Zhonghe District, CC&C Technologies, Inc. New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 MINI PCI EXPRESS PIN ASSIGNMENT PIN# Pin Name PIN# Pin Name 1 WAKE#
3 COEX1 5 COEX2 YES 2 +3.3Vaux NC NC 4 GND 6 +1.5V 7 CLKREQ#
YES 8 UIM_PWR 9 GND YES 10 UIM_DATA 11 REFCLK-
YES 12 UIM_CLK 13 REFCLK+
YES 14 UIM_RESET 15 GND YES 16 UIM_VPP YES YES NC NC NC NC NC NC 17 RESERVED 19 RESERVED NC NC 18 GND YES 20 W_DISABLE#
YES 21 GND 23 PERn0 25 PERp0 27 GND 29 GND 31 PETn0 33 PETp0 35 GND 37 GND YES 22 PERST#
YES 24 +3.3Vaux YES 26 GND YES 28 +1.5V YES 30 SMB_CLK YES 32 SMB_DATA YES 34 GND YES 36 USB_D-
YES 38 USB_D+
39 +3.3Vaux YES 40 NC 41 +3.3Vaux YES 42 LED_WWAN#
YES NC YES NC NC NC YES NC NC NC NC 43 GND YES 44 LED_WLAN#
YES 45 RESERVED 47 RESERVED 49 RESERVED 51 RESERVED NC NC NC NC 46 LED_WPAN#
48 +1.5V 50 GND 52 +3.3Vaux NC NC YES YES 6 8F, No. 150, Jian Yi Road, Zhonghe District, CC&C Technologies, Inc. New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Block Diagram 7 8F, No. 150, Jian Yi Road, Zhonghe District, CC&C Technologies, Inc. New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Mechanical Dimensions (mm) Length 29.85 Width 26.65 Height 4.45
(Tolerance:0.1mm)
(Tolerance:0.1mm)
(Tolerance:0.15mm) 8 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna, 3) For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID:
R33EAV2WIFI. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Industry Canada statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference
(2) This device must accept any interference, including interference that may cause undesired operation of the device Cet appareil contient des metteurs / rcepteurs exempts de licence qui sont conformes au (x) RSS (s) exempts de licence d'Innovation, Sciences et Dveloppement conomique Canada. L'opration est soumise aux deux conditions suivantes:
(1) Cet appareil ne doit pas causer d'interfrences
(2) Cet appareil doit accepter toute interfrence, y compris les interfrences pouvant provoquer un fonctionnement indsirable de l'appareil This radio transmitter (IC: 7848A-EAV2WIFI) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (IC: 7848A-EAV2WIFI) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Antenna info. Antenna Model CSL-AN2400-100840-B01 Type Dipole Connector R-SMA Peak gain ( dBi ) 2400~2483.5MHz 2dBi Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:
Cet quipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrl. Cet quipement doit tre install et utilis distance minimum de 20cm entre le radiateur et votre corps. This device is intended only for OEM integrators under the following conditions:
1) The transmitter module may not be co-located with any other transmitter or antenna. As long as 1 condition above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conu uniquement pour les intgrateurs OEM dans les conditions suivantes:
1) Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. Tant que les 1 condition ci-dessus sont remplies, des essais supplmentaires sur l'metteur ne seront pas ncessaires. Toutefois, l'intgrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformit supplmentaires requis pour ce module install. IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE:
Dans le cas o ces conditions ne peuvent tre satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre metteur), l'autorisation du Canada n'est plus considr comme valide et l'ID IC ne peut pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur OEM sera charg de rvaluer le produit final (y compris l'metteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling The final end product must be labeled in a visible area with the following: Contains IC:7848A-EAV2WIFI. Plaque signaltique du produit final Le produit final doit tre tiquet dans un endroit visible avec l'inscription suivante:
"Contient des IC: 7848A-EAV2WIFI". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information l'utilisateur final L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur final quant la faon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations rglementaires requises et avertissements comme indiqu dans ce manuel.