FCC ID: 2BFEP-M50 Video Doorbell

M50 Smart Wi-Fi Doorbell Camera Scan the code to view the user manual User Manual 1.0 - Outlet Version 5 6 7 9 Features 1 2 3 4 Motion Sensor 1. 2. Wide-angle Lens 3. Indicator Light 4. Speaker 5. Microphone 6. Infrared Lights 7. Doorbell Button 8 8. Reset Button 9. Micro USB Port (For Battery Charging) In the box 1. 1080p Doorbell Camera 2. 3. Mounting Bracket Removal Tool Micro-USB Cable 4. User Manual 5. Wireless Chime Indicator light Indicator Light Flashing RED The device is disconnected from Wi-Fi. It will attempt to reconnect automatically. If it fails, please reset the device and pair it again in the app. Flashing RED and BLUE Alternately Low battery. Please recharge the device. Flashing BLUE The device is recording. Solid RED The device is charging. RED Light Turns OFF When the device is fully charged. Recharge your doorbell 1. Remove the mounting bracket To do this, insert the included mounting bracket removal tool into the hole at the top of the doorbell. Push in until the bracket slides off. 2. Remove the battery tab 3. Recharge Your Doorbell Before First Use a standard micro-USB cable, such as the one provided in the box. Simply plug it into any 5V1A USB power source. Your doorbell camera may take approximately 8-10 hours to fully charge, depending on whether the USB cable is connected to a USB port or a wall outlet. A solid RED light indicates that the doorbell is charging. When the doorbell is fully charged, the RED light will turn off. Create an account in the Aiwit app 1. Scan the QR code provided or search for Aiwit in the Apple App Store or Google Play. Then download and install the app. Android/iOS App Download 2. Open the Aiwit app on your cellphone and tap Sign up. v2.7.4 (3752) Login Sign up 3. Enter your email address, set a password, and tap Sign up.

4. Tap Please log in. (Note: You will also receive an email containing an activation link. Access this email and tap on the Activate Account link to verify.)

5. Re-open the Aiwit app, enter your email address and password, and tap Log in.

Set up your doorbell in the Aiwit app 1. Before setting up the camera, ensure your cellphone's Bluetooth is turned on 2. Open the Aiwit app and sign in to your account. 3. 4. 5. 6. To add your camera, tap the Add device icon (+). Choose Video Doorbell and then select the M50 model. Press and hold the doorbell button until the red light starts flashing. You will hear Entering pairing mode. The device supports only the 2.4GHz Wi-Fi network. Navigate to your cellphone's Wi-Fi settings, connect to a 2.4GHz Wi-Fi network, and tap Yes. (Note: 5GHz Wi-Fi is not supported). 7. For Connection Setup: Select your 2.4GHz Wi-Fi network name, input the password, and tap Next. 8. Tap Confirm. 9. Use the devices camera to scan the QR code on your phone. 10. Once you hear Device registration successful, you are all set. Install your doorbell 1. Remove the mounting bracket To do this, insert the included mounting bracket removal tool into the hole at the top of the doorbell. Push in until the bracket slides off. 2. Prepare for mounting Mark the drill holes and use a bit to drill into your wall. Insert the anchors and secure your back plate with the provided mounting and screws. 3. Reattach the doorbell Place the doorbell back on by slotting it in at the bottom and clicking it into place. How to reset your doorbell 1. Remove the mounting bracket To do this, insert the included mounting bracket removal tool into the hole at the top of the doorbell. Push in until the bracket slides off. 2. Press RESET button on the back of the doorbell Reset Button Set up your wireless chime Connect the doorbell camera to the wireless chime and receive an instant alert in your home when someone rings the doorbell. The chime plugs into any outlet, allowing you to place it anywhere in your home. Wireless Chime Pairing Button 1. Plug the chime into an outlet and press the pairing button Before beginning the setup process, ensure that your video doorbell is connected to your phone. Then, plug the chime into an outlet and press the pairing button. 2. Set up your wireless chime Press the doorbell button to pair it with the chime. 3. Press the doorbell button Press the doorbell button again to verify that the chime and doorbell are working properly. Please note that the volume of the chime is not adjustable. Frequently asked questions 1. How can I share the device with family members?

Open the Aiwit app and tap on Settings . From there, you can share the device via QR code or email, and even transfer ownership of the device. The new user must first download the Aiwit app and create their own account. 2. Why can't I change the settings?

Only the owner account can change settings, delete videos, and share the device. Shared accounts do not have these options. 3. How many users can view the device at the same time?

The owner account can share the device with up to 8 other accounts. Up to 3 users may view the video feed at once, but only 1 user can use the intercom. 4. Is the 5GHz Wi-Fi supported?

No, the camera only works with 2.4GHz Wi-Fi. Please separate two Wi-Fi bands by giving the 2.4 GHz and 5 GHz networks each a unique separate SSID (network name). Then connect your device to the 2.4GHz Wi-Fi. 5. Why is my Wi-Fi signal weak?

Your camera may be too far from your wireless router, or there may be obstructions reducing signal strength. You might want to reposition your router or get a signal extender/repeater. 6. Why is the device offline?

The camera being offline means it is disconnected. There could be a few reasons for this:

1) 2) 3) The camera has run out of power. You will need to recharge it. The Wi-Fi signal is weak, causing disconnection. Please improve your Wi-Fi signal and reconnect the device. If the Wi-Fi is unstable, the device might go offline or get delayed frequently. You can try restarting the router and reconnecting the Wi-Fi to see if it helps. A good Wi-Fi connection is essential since the device is outside the house. 7. How can I adjust the human detection accuracy?

Open the Aiwit app and tap on Settings. Next, tap on Motion Settings. Here, you can select the desired human detection accuracy from three options: low, medium, and high. We recommend choosing medium. The high setting provides the strictest detection level, meaning the device will be triggered only when it is entirely certain that the moving object is a human. However, this stringent setting might cause the device to overlook a human figure, resulting in a missed notification. High Accuracy -

The device will record videos less frequently, ensuring maximum battery life. Medium Accuracy

Medium battery life. Low Accuracy

The device will record videos more frequently, leading to the shortest battery life. If the areas you're monitoring experience excessive or repetitive motions, like children playing in the yard, you may receive numerous alerts, which can rapidly deplete the battery of devices. The human detection accuracy settings are designed to help you receive the notifications you want while preserving battery life. 8. How can I enable notifications on my phone?

1) 2) Open the Aiwit app. From the Device page, tap the Settings icon, then tap the Motion Detection icon. Here, you can choose whether to turn Motion Alerts on or off. Open your phone's settings. Navigate to "App Management" and "Notification Settings," then locate the Aiwit app. Ensure all permissions and notifications are enabled for the Aiwit app. Contact us If you require further assistance, feel free to reach out to our support team. Email us at service@aiwit.cc or use the Aiwit app's support feature. Please include your product's model and the retailer's name. Thank you. M50

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference received, including interference that may cause undesired operation. interference, and (2) this device must accept any This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

FLAT/RM 05 12/F EMPRESS PLAZA N0.17-19 CHATHAM ROAD TST KL Hongkong China EKEN GROUP LIMITED Date: 2024-3-20 To:

Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern, The letter grants authorization for representative of CONVERGE BEAUTY LIMITED to apply for its own FCC identification number FCC ID: 2BFEP-M50 for the product that is the subject of the EKEN GROUP LIMITED, FCC ID: 2ADDG-M50, granted on 12/21/2023. The equipment is electrically identical. The only change being the label on the device. The original test results, technical information and relevant documents continue to be representative of and applicable to the changed equipment. Applicant/Grantee (Original Company) Name: EKEN GROUP LIMITED Applicant/Grantee (New Company) Name: CONVERGE BEAUTY LIMITED New applicant Grantee Code (s): 2BFEP New applicant FRN (s): 0035115658 Name of New Point of Contact to be in EAS Database: Edison Yichun zhang E-mail address of New Point of Contact in EAS Database: zhangyichun@eken.com Please contact me if you have any question. Contact name / title : Molly Mok/Sales Manager Company: EKEN GROUP LIMITED address : FLAT/RM 05 12/F EMPRESS PLAZA N0.17-19 CHATHAM ROAD TST KL Hongkong China Tel: +86-755-85261055 Fax: +86-755-85261055-802 E-mail: molly@eken.com

CONVERGE BEAUTY LIMITED FLAT/RM C 22/F FORD GLORY PLAZA 37 WING HONG STREET LAI CHI KOK KOWLOON HONG KONG China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

2024-3-20 We, CONVERGE BEAUTY LIMITED, hereby certify that the equipment for which authorization is sought

(FCC ID: 2BFEP-M50) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, 3 0 V

, U

) i i

d n a

) i

) 5

) d

1 1 9 2 _ u q E d e r e v o C

l e d o m

_ 2 6 Signature Edison Yichun zhang Manager CONVERGE BEAUTY LIMITED

FLAT/RM C 22/F FORD GLORY PLAZA 37 WING HONG STREET LAI CHI KOK KOWLOON CONVERGE BEAUTY LIMITED HONG KONG China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

2024-3-20 We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2BFEP-M50 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

Edison Yichun zhang/Manager CONVERGE BEAUTY LIMITED FLAT/RM C 22/F FORD GLORY PLAZA 37 WING HONG STREET LAI CHI KOK KOWLOON HONG KONG China 18688982589 N/A zhangyichun@eken.com

FLAT/RM C 22/F FORD GLORY PLAZA 37 WING HONG STREET LAI CHI KOK CONVERGE BEAUTY LIMITED KOWLOON HONG KONG China Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Attention: Application Examiner / Review Engineer Subject: Request to change in identification per section 2.933 of FCC rules Reference: FCC ID: 2BFEP-M50 Date: 2024-3-20 To The Commission:

This change of Identification request applies for a new FCC ID: 2BFEP-M50 as established in 47CFR 2.933(b) for a currently approved device. This application by CONVERGE BEAUTY LIMITED will establish a new FCC ID under CONVERGE BEAUTY LIMITED Grantee code for purpose of marketing. The original grant to EKEN GROUP LIMITED will remain in effect. An authorization letter by EKEN GROUP LIMITED attached. Per 2.933(b) 1. The original identification is FCC ID: 2ADDG-M50 2. The original grant date is 12/21/2023 3. The equipment is identical to the original equipment. 4. The original test results are applicable and representative of this changed device. 5. Exterior photographs are included in this application. The following files are electronically submitted as attachments:

FCC ID label and label location External photographs Letter of Change FCC ID Authorization Letter for FCC ID User Manual Product Equality Declaration Sincerely, Clients name / title : Edison Yichun zhang/Manager Company: CONVERGE BEAUTY LIMITED address : FLAT/RM C 22/F FORD GLORY PLAZA 37 WING HONG STREET LAI CHI KOK KOWLOON HONG KONG China Tel: 18688982589 Fax: N/A Email: zhangyichun@eken.com

FLAT/RM C 22/F FORD GLORY PLAZA 37 WING HONG STREET LAI CHI KOK KOWLOON HONG KONG CONVERGE BEAUTY LIMITED China Date: 2024-3-20 To:

Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern, Original FCC ID: 2ADDG-M50; Model Number: M50,M60, M70, M80, M90, M51, M52, M53, K50, K60, K70, K80, K90,K51, K52, K53, H50, H60, H70, H80, H90, H51, H52, H53 New FCC ID: 2BFEP-M50; Model Number: M50,M60, M70, M80, M90, M51, M52, M53, K50, K60, K70, K80, K90, K51, K52, K53, H50, H60, H70, H80, H90, H51, H52, H53, M10, M30,T50, N50, P50, T8, K8 This is to advise and officially, that we, CONVERGE BEAUTY LIMITED hereby declare that the product name is same and only FCC ID and model number difference as market requirement;

The original test results continue to be representative of and applicable to the equipment of the new FCC ID;

If you have any query, please feel free to contact me. Sincerely, Clients name / title : Edison Yichun zhang/Manager Company: CONVERGE BEAUTY LIMITED address : FLAT/RM C 22/F FORD GLORY PLAZA 37 WING HONG STREET LAI CHI KOK KOWLOON HONG KONG China Tel: 18688982589 Fax: N/A Email: zhangyichun@eken.com

CONVERGE BEAUTY LIMITED FLAT/RM C 22/F FORD GLORY PLAZA 37 WING HONG STREET LAI CHI KOK KOWLOON HONG KONG Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 2024/03/19 CONVERGE BEAUTY LIMITED acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought

(FCC ID: 2BFEP-M50):

Name and company of U.S. agent:

GSS SERVICE INC Physical U.S. address of agent:

6547 N Academy Blvd #2266 Colorado Springs COLORADO 80918 FRN of U.S. agent:

United States 0033402082 Email address of U.S. agent:

MichouxLogan@outlook.com GSS SERVICE INC acknowledges their obligation to accept service of process on behalf of CONVERGE BEAUTY LIMITED CONVERGE BEAUTY LIMITED with the FRN [0035115658] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. 5 0 V

, U

) 7

) d

1 1 9 2 _ t n e g A _ S U

l e d o m

_ 8 4 Sincerely, Signature Edison Yichun zhang Manager Signature Michoux Logan PM CONVERGE BEAUTY LIMITED GSS SERVICE INC