Coolr Smart Sensor Installation Quick Reference Pre-install Checklist 1. Hardware installation items a. Tack b. Paper or lint free cloth to clean the glass surface 2. For software configuration a. Android phone with Android 4.4 or above and Bluetooth 4.1 or above b. Bluetooth and internet connectivity on the phone Ideally GPS should also be on c. d. Login credentials for the application Physical Installation Initiate 1. Peel the sticker from front of the device 2. Note down the serial# from the bottom of the device Identify install position 1. Coolr Smart Sensor should be placed on inner wall of the Door of the cooler. 2. Sensor should be placed vertically at corner of cooler door. Ideal position is top corner on the left side Install 1. Clean the glass to remove any moisture 2. Stick the device in vertical position with Cap towards top 3. Push the device and hold for about 5 seconds Provisioning Login 1. Login to the Coolr Intelligence Application from Playstore. Select Store 1. If store is not found, you can start typing in the name in the 2. outlet search box 3. If it is a new store, refer to Troubleshooting section 1. Select Asset (Cooler) If asset is not found, you can start typing cooler serial# in the asset search box If it is a new cooler
(not existing in database), refer to Troubleshooting section 2. 1 | P a g e Coolr Smart Sensor Installation Quick Reference Initiate Installation 1. Tap on to open the sub-menu 2. Select Install SmartDevice Associate Device 1. Phone will show the nearby Smart Devices 2. Tap on the device installed to associate with the cooler Verifying Installation 1. Go to device 2. monitor If device is not already shown, click on Sync now 3. Look for device information 4. Door angle should be zero 5. Do a door open/ close 6. Last door close time should change Troubleshooting Issue: Cant find application in Play Store You can alternatively download the application from https://play.google.com/store/apps/details?id=
com.coolrgroup.coolrintelligence Issue: Cant find the device during install 1. Make sure that phone has BLE 4.1 or higher 2. Make sure your Phone OS is Android 4.4 or higher 3. Make sure Bluetooth and Location Services are ON 4. Shine light using phone flashlight on the front of the device to reactivate it Issue: Cant find the store in Store List 1. Tap on to open the sub-
menu on Home Screen. 2. Select Add Outlet Issue: Cant find the asset in Asset List 1. Tap on to open the sub-
menu on outlet detail screen. 2. Select Add Asset Issue: Door opens from right instead of Left or how to configure parameters 1. Expand menu icon on top left 2. Select Device Monitor 3. Verify Smart Device visibility by confirming the Serial#
4. Tap on the device that you information need to configure 5. Device configuration screen is displayed 6. Change door Open Direction to Right door handle 7. Modify necessary configuration 8. Tap on Save icon to Save configuration 2 | P a g e Coolr Smart Sensor Installation Quick Reference FCC Warnings & Info:
(A) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
(B) changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. 3 | P a g e