XPD900 Rev.3 (TPCB-3612-01) User Manual Installation Procedure FCC ID: IA9XPD900 ISED ID: 1338B-XPD900 Document Revision: 1
//rf/radio/products/xpd900/FCC/User_Manual.docx This document, submitted in confidence, contains proprietary information which shall not be reproduced or transferred to other documents, disclosed to others, used for manufacturing or any other purpose without the prior written permission of Eaton / Cooper Industries (Electrical) Inc. Copyright 2023 Eaton / Cooper Industries (Electrical) Inc. All rights reserved. XPD900 Rev.3 (TPCB-3612-01) User Manual Integration Instructions Revision 1 Revision History Revision Author Date Description 0.1 1 Radu Oprea M. Bazzarelli December 28, 2012 Initial Draft October 3, 2023 2023 C2PC Update Antenna & Portable Company Confidential Cooper Industries (Electrical) Inc. 2/7 XPD900 Rev.3 (TPCB-3612-01) User Manual Integration Instructions Revision 1 CONTENTS 1 2 Introduction ...................................................................................................................... 4 Labeling Requirements ..................................................................................................... 4 2.2 2.1 FCC Part 15 Statement for Class A Devices ............................................................ 4 2.1.1 FCC RF Exposure Statement ....................................................................... 4 ISED Statement for Class A Devices ....................................................................... 5 ISED RF Exposure Statement ...................................................................... 5 2.2.1 2.2.2 RSS-Gen Transmit Antenna Statement ........................................................ 6 3 RF Exposure Information .................................................................................................. 7 3.1 Mobile Applications ................................................................................................. 7 3.2 Portable Applications ............................................................................................... 7 4 Certified Antenna .............................................................................................................. 7 Company Confidential Cooper Industries (Electrical) Inc. 3/7 XPD900 Rev.3 (TPCB-3612-01) User Manual Integration Instructions Revision 1 1 Introduction The XPD900 transceiver module is not sold separately as a stand-alone device. The module is a subassembly for use inside Cooper Industries (Electrical) Inc. host products. This manual is for the use of Cooper Industries (Electrical) Inc. professionals to integrate the radio module into host products and maintain compliance. 2 Labeling Requirements The statements provided in sections 2.1 and 2.2 shall be included in the user manual for a host device containing the XPD900 radio module. 2.1 FCC Part 15 Statement for Class A Devices FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)
(2) this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2.1.1 FCC RF Exposure Statement For a portable host device include this statement in the manual:
FCC RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For a mobile host device include this statement in the manual:
FCC RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, this equipment should be installed and operated with minimum distance 20 cm (7.9 inches) between the antenna and your body during normal operation. Users must follow the specific operating instructions for satisfying RF exposure compliance. Company Confidential Cooper Industries (Electrical) Inc. 4/7 XPD900 Rev.3 (TPCB-3612-01) User Manual Integration Instructions 2.2 ISED Statement for Class A Devices ISED Non-Interference Disclaimer Revision 1 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. This device complies with the Canadian ICES-003 Class A specifications. CAN ICES-
003(A) / NMB-003 (A). Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempt de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Cet appareil numrique de la Canadian ICES-003. Cet appareil numrique de la classe A est conforme la norme NMB-003 du Canada. 2.2.1 ISED RF Exposure Statement For a portable host device include this statement in the manual:
This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet quipement est conforme aux limites dexposition aux radiations ISED CNR-102 tablies pour un environnement non contrl. Lanceurs ou ne peuvent pas coexister cette antenne ou capteurs avec dautres. For a mobile host device include this statement in the manual:
ISED RF Exposure Statement This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm (7.9 inches) between the radiator and any part of your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet quipement est conforme aux limites dexposition aux radiations ISED CNR-102 tablies pour un environnement non contrl. Une distance de sparation d'au moins 20 cm doivent tre maintenue entre l'antenne de cet appareil et toutes les personnes. Lanceurs ou ne peuvent pas coexister cette antenne ou capteurs avec dautres. The following statement must be included in the host product manual:
Company Confidential Cooper Industries (Electrical) Inc. 5/7 XPD900 Rev.3 (TPCB-3612-01) User Manual Integration Instructions 2.2.2 RSS-Gen Transmit Antenna Statement Revision 1 For devices that have a removable antenna include the following statement in the user manual. Only one removable antenna is listed below for inclusion with this statement because the other approved antennas are not removable. RSS-Gen Transmit Antenna Statement This radio transmitter 1338B-XPD900 has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Le prsent metteur radio 1338B-XPD900 a t approuv par Innovation, Sciences et Dveloppement conomique Canada pour fonctionner avec les types d'antenne numrs ci dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu pour tout type figurant sur la liste, sont strictement interdits pour l'exploitation de l'metteur. Innovation, Science and Economic Development regulations, this radio Under transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by ISED. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. la Conformment rglementation d'Innovation, Sciences et Dveloppement conomique Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Innovation, Sciences et Dveloppement conomique Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente
(p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. Approved Antenna Types:
Antenna Mfg. Part Number Pulse Larsen NMO3E900B NMOHFMID Gain
(dBi) 5.4 Type 5/8 over 1/4 monopole whip NOTE: There are other approved antennas, however they are not included in this statements table because they are not removable. See the antenna section for all approved antennas. Only the removable antenna is listed in this table. Company Confidential Cooper Industries (Electrical) Inc. 6/7 XPD900 Rev.3 (TPCB-3612-01) User Manual Integration Instructions 3 RF Exposure Information Revision 1 This product is intended for mobile and portable installation applications. 3.1 Mobile Applications In order comply with FCC and ISED RF exposure requirements, installation of this transmitter system's antennas for a mobile host device must be performed in a manner that will provide at least 20 cm of clearance from the antenna to any user or member of the public. 3.2 Portable Applications To comply with FCC and ISED RF exposure requirements, installation of this transmitter systems antenna in a portable host device must provide the required minimum user separation distance for each specific certified antenna that is listed in the XPD 900 RF Exposure document. 4 Certified Antenna Antennas that are certified for use with the XPD900 Rev.3 (TPCB-3612-01) radio module are listed in the following table. Antenna Reference Antenna Mfg. Mfg. Part Number Antenna Type Antenna Gain
(dBi) Antenna Connector Type Antenna Information Host Product Trace Design Host PCB Host BOM 1 3 3 4 4 4 4 Pulse Larsen NMO3E900B NMOHFMID Linx Linx ANT-916-uSP ANT-916-uSP 5/8 over 1/4 monopole whip 1/4 monopole 1/4 monopole 5.4 0.3 0.3 SMA with coaxial 6 cable. SMT soldered on PCB SMT soldered on PCB N/A N/A N/A TD1141 Rev.4 FPCB-
4053R04 N/A TD3100 Rev.4 FPCB-
3875R04 N/A Eaton/Cooper Industries
(Electrical) Inc. Eaton/Cooper Industries
(Electrical) Inc. Eaton/Cooper Industries
(Electrical) Inc. Eaton/Cooper Industries
(Electrical) Inc. ACAB-2683-07 1/4 monopole 2.54 Soldered to PTH on PCB R260 Rev.7 FPCB-
3375R07 900 MHz Rev. 7 ACAB-2683-07 1/4 monopole 2.54 Soldered to PTH on PCB R260 Rev.13 FPCB-
3375R13 900 MHz Rev. 13 ACAB-2683-07 1/4 monopole 2.54 Soldered to PTH on PCB R270 Rev.3 FPCB-
3958R03 900 MHz Rev. 3 ACAB-2683-07 1/4 monopole 2.54 Soldered to PTH on PCB R270 Rev.4 FPCB-
3958R04 900 MHz Rev. 4 Table 1 Certified Antennas Company Confidential Cooper Industries (Electrical) Inc. 7/7