FCC ID: IA9XPD900 900 MHz Data Transceiver Module

XPD900 User Manual Radu Oprea

//radio/products/xpd900/FCC/User_Manual.docx This document, submitted in confidence, contains proprietary information which shall not be reproduced or transferred to other documents, disclosed to others, used for manufacturing or any other purpose without the prior written permission of Cooper Industries (Electrical) Ltd. Copyright 2012 Cooper Industries (Electrical) Ltd. All rights reserved. Title Subject

- 2 -

Revision 0.1 Company Confidential: Cooper Industries (Electrical) Ltd Title Subject Revision 0.1 Author Radu Oprea

- 3 -

Revision 0.1 Revision History Description Date Dec-28-2012 Initial Draft Company Confidential: Cooper Industries (Electrical) Ltd Title Subject

- 4 -

CONTENTS Revision 0.1 1 Introduction ...................................................................................................................... 5 2 FCC Notice, U.S.A. .......................................................................................................... 5 3 IC Notice, Canada ............................................................................................................ 5 4 RF Exposure Information .................................................................................................. 5 Company Confidential: Cooper Industries (Electrical) Ltd Title Subject

- 5 -

Revision 0.1 Introduction 1 The XPD900 transceiver module is not sold separately as a standalone device. It is intended to be used as part of a complete Cooper Industries remote control device and in the user manual for any device containing the module will be included the text from the following paragraph. This manual is for the use of professionals to guide them in the installation, operation and basic system maintenance of the equipment covered. 2 FCC Notice U.S.A. XPD900 complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Caution - Changes or modifications not expressly approved by the OMNEX Control Systems ULC will void the users authority to operate the equipment. 3 IC Notice Canada Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. 4 RF Exposure Information READ THIS INFORMATION BEFORE INSTALLING THE XPD900 This product is intended for mobile and portable installation applications. In order to comply with FCC/ISC adopted RF exposure requirements for mobile applications, installation of this transmitter system's antennas must be performed in a manner that will provide at least 2.1 inches (5.3 cm) clearance from the antenna to any user or member of the public. XPD900 was certified with a Larsen Antennas NMO3E900B antenna with a 186 cm cable (6 foot cable). The maximum radiated output power of these antennas satisfies the maximum permissible exposure for general population/uncontrolled exposure as long as the minimum separation distance of 20 cm between the radiating element and the person is maintained, assuming a 100% duty cycle. For portable applications the SAR measurements will be performed on a product level if they are required. in 1.1310 of FCC limits as specified regulations

(MPE) Company Confidential: Cooper Industries (Electrical) Ltd

XPD900 Rev.3 (TPCB-3612-01) User Manual Installation Procedure FCC ID: IA9XPD900 ISED ID: 1338B-XPD900 Document Revision: 1

//rf/radio/products/xpd900/FCC/User_Manual.docx This document, submitted in confidence, contains proprietary information which shall not be reproduced or transferred to other documents, disclosed to others, used for manufacturing or any other purpose without the prior written permission of Eaton / Cooper Industries (Electrical) Inc. Copyright 2023 Eaton / Cooper Industries (Electrical) Inc. All rights reserved. XPD900 Rev.3 (TPCB-3612-01) User Manual Integration Instructions Revision 1 Revision History Revision Author Date Description 0.1 1 Radu Oprea M. Bazzarelli December 28, 2012 Initial Draft October 3, 2023 2023 C2PC Update Antenna & Portable Company Confidential Cooper Industries (Electrical) Inc. 2/7 XPD900 Rev.3 (TPCB-3612-01) User Manual Integration Instructions Revision 1 CONTENTS 1 2 Introduction ...................................................................................................................... 4 Labeling Requirements ..................................................................................................... 4 2.2 2.1 FCC Part 15 Statement for Class A Devices ............................................................ 4 2.1.1 FCC RF Exposure Statement ....................................................................... 4 ISED Statement for Class A Devices ....................................................................... 5 ISED RF Exposure Statement ...................................................................... 5 2.2.1 2.2.2 RSS-Gen Transmit Antenna Statement ........................................................ 6 3 RF Exposure Information .................................................................................................. 7 3.1 Mobile Applications ................................................................................................. 7 3.2 Portable Applications ............................................................................................... 7 4 Certified Antenna .............................................................................................................. 7 Company Confidential Cooper Industries (Electrical) Inc. 3/7 XPD900 Rev.3 (TPCB-3612-01) User Manual Integration Instructions Revision 1 1 Introduction The XPD900 transceiver module is not sold separately as a stand-alone device. The module is a subassembly for use inside Cooper Industries (Electrical) Inc. host products. This manual is for the use of Cooper Industries (Electrical) Inc. professionals to integrate the radio module into host products and maintain compliance. 2 Labeling Requirements The statements provided in sections 2.1 and 2.2 shall be included in the user manual for a host device containing the XPD900 radio module. 2.1 FCC Part 15 Statement for Class A Devices FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)

(2) this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2.1.1 FCC RF Exposure Statement For a portable host device include this statement in the manual:

FCC RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For a mobile host device include this statement in the manual:

FCC RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, this equipment should be installed and operated with minimum distance 20 cm (7.9 inches) between the antenna and your body during normal operation. Users must follow the specific operating instructions for satisfying RF exposure compliance. Company Confidential Cooper Industries (Electrical) Inc. 4/7 XPD900 Rev.3 (TPCB-3612-01) User Manual Integration Instructions 2.2 ISED Statement for Class A Devices ISED Non-Interference Disclaimer Revision 1 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. This device complies with the Canadian ICES-003 Class A specifications. CAN ICES-

003(A) / NMB-003 (A). Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempt de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Cet appareil numrique de la Canadian ICES-003. Cet appareil numrique de la classe A est conforme la norme NMB-003 du Canada. 2.2.1 ISED RF Exposure Statement For a portable host device include this statement in the manual:

This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet quipement est conforme aux limites dexposition aux radiations ISED CNR-102 tablies pour un environnement non contrl. Lanceurs ou ne peuvent pas coexister cette antenne ou capteurs avec dautres. For a mobile host device include this statement in the manual:

ISED RF Exposure Statement This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm (7.9 inches) between the radiator and any part of your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet quipement est conforme aux limites dexposition aux radiations ISED CNR-102 tablies pour un environnement non contrl. Une distance de sparation d'au moins 20 cm doivent tre maintenue entre l'antenne de cet appareil et toutes les personnes. Lanceurs ou ne peuvent pas coexister cette antenne ou capteurs avec dautres. The following statement must be included in the host product manual:

Company Confidential Cooper Industries (Electrical) Inc. 5/7 XPD900 Rev.3 (TPCB-3612-01) User Manual Integration Instructions 2.2.2 RSS-Gen Transmit Antenna Statement Revision 1 For devices that have a removable antenna include the following statement in the user manual. Only one removable antenna is listed below for inclusion with this statement because the other approved antennas are not removable. RSS-Gen Transmit Antenna Statement This radio transmitter 1338B-XPD900 has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Le prsent metteur radio 1338B-XPD900 a t approuv par Innovation, Sciences et Dveloppement conomique Canada pour fonctionner avec les types d'antenne numrs ci dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu pour tout type figurant sur la liste, sont strictement interdits pour l'exploitation de l'metteur. Innovation, Science and Economic Development regulations, this radio Under transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by ISED. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. la Conformment rglementation d'Innovation, Sciences et Dveloppement conomique Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Innovation, Sciences et Dveloppement conomique Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente

(p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. Approved Antenna Types:

Antenna Mfg. Part Number Pulse Larsen NMO3E900B NMOHFMID Gain

(dBi) 5.4 Type 5/8 over 1/4 monopole whip NOTE: There are other approved antennas, however they are not included in this statements table because they are not removable. See the antenna section for all approved antennas. Only the removable antenna is listed in this table. Company Confidential Cooper Industries (Electrical) Inc. 6/7 XPD900 Rev.3 (TPCB-3612-01) User Manual Integration Instructions 3 RF Exposure Information Revision 1 This product is intended for mobile and portable installation applications. 3.1 Mobile Applications In order comply with FCC and ISED RF exposure requirements, installation of this transmitter system's antennas for a mobile host device must be performed in a manner that will provide at least 20 cm of clearance from the antenna to any user or member of the public. 3.2 Portable Applications To comply with FCC and ISED RF exposure requirements, installation of this transmitter systems antenna in a portable host device must provide the required minimum user separation distance for each specific certified antenna that is listed in the XPD 900 RF Exposure document. 4 Certified Antenna Antennas that are certified for use with the XPD900 Rev.3 (TPCB-3612-01) radio module are listed in the following table. Antenna Reference Antenna Mfg. Mfg. Part Number Antenna Type Antenna Gain

(dBi) Antenna Connector Type Antenna Information Host Product Trace Design Host PCB Host BOM 1 3 3 4 4 4 4 Pulse Larsen NMO3E900B NMOHFMID Linx Linx ANT-916-uSP ANT-916-uSP 5/8 over 1/4 monopole whip 1/4 monopole 1/4 monopole 5.4 0.3 0.3 SMA with coaxial 6 cable. SMT soldered on PCB SMT soldered on PCB N/A N/A N/A TD1141 Rev.4 FPCB-

4053R04 N/A TD3100 Rev.4 FPCB-

3875R04 N/A Eaton/Cooper Industries

(Electrical) Inc. Eaton/Cooper Industries

(Electrical) Inc. Eaton/Cooper Industries

(Electrical) Inc. Eaton/Cooper Industries

(Electrical) Inc. ACAB-2683-07 1/4 monopole 2.54 Soldered to PTH on PCB R260 Rev.7 FPCB-

3375R07 900 MHz Rev. 7 ACAB-2683-07 1/4 monopole 2.54 Soldered to PTH on PCB R260 Rev.13 FPCB-

3375R13 900 MHz Rev. 13 ACAB-2683-07 1/4 monopole 2.54 Soldered to PTH on PCB R270 Rev.3 FPCB-

3958R03 900 MHz Rev. 3 ACAB-2683-07 1/4 monopole 2.54 Soldered to PTH on PCB R270 Rev.4 FPCB-

3958R04 900 MHz Rev. 4 Table 1 Certified Antennas Company Confidential Cooper Industries (Electrical) Inc. 7/7

Eaton DBA Cooper Industries (Electrical) Inc. 74 1833 Coast Meridian Road Port Coquitlam BC Canada V3C6G5 XPD900 Label Sample XPD900 Label Location

Eaton Cooper Industries (Electrical) Inc. 74 1833 Coast Meridian Road Port Coquitlam BC Canada V3C6G5 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent for FCC and ISED application On our behalf, I appoint Spencer Zhong of Nemko Canada, Inc. at 303 River Road, Ottawa, Ontario, Canada K1V 1H2, to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in FCC and in ISED Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. In signing this letter, Applicant certifies that neither the applicant nor any party to the application is not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Cooper Industries

(Electrical) Inc, 74-1833 Coast Meridian Rd, Port Coquitlam, BC V3C 6G5, Canada. Dated: October 11, 2023 Agency agreement expiration date:

2024-03-31 Signed by:

Patrick Ho Business Manager Mobile Wireless & Embedded Power Email: patrickho@eaton.com Telephone: +1 (604) 472 4718 On behalf of:

Cooper Industries (Electrical) Inc.

Eaton Cooper Industries (Electrical) Inc. 74 1833 Coast Meridian Road Port Coquitlam BC Canada V3C6G5 October 11, 2023 Federal Communications Commission EQUIPMENT AUTHORIZATION BRANCH 7435 Oakland Mills Road Columbia, MD 21046 Reference: FCC ID: IA9XPD900 Application for Class II Permissive Change Dear Sir/Madam:

We respectfully wish to apply for a Class II permissive change for the above referenced FCC Identifier under the provisions of FCC rule 2.1043. The change filed under this application entails replacing the reference frequency oscillator from a VCTCXO to a TCXO of the same nominal frequency, in the same package and a compatible pin out. There were no changes to the PCB. This change was approved as a Class II Permissible Change based on a PAG, inquiry tracking number 880398, following the current Notification 202109-001. Test reports showing compliance are submitted with this application. The applicant certifies that no party to this application is subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug abuse Act of 1988. Our FRN number is 0008688764. Your prompt attention to this matter is appreciated. Please let me know if there are any questions or if further data is required. Sincerely, Signed by:

Signature Patrick Ho Print name Business Manager Title 1 (640) 472 - 4718 Phone

Eaton Cooper Industries (Electrical) Inc. 74 1833 Coast Meridian Road Port Coquitlam BC Canada V3C6G5 REQUEST FOR CONFIDENTIALITY Date: October 11, 2023 To: Federal Communications Commission Equipment Authorization Branch Laboratory Division Office of Engineering and Technology 7435 Oakland Mills Road Columbia, Maryland 21046 Subject: Request for Confidentiality Applicant: Cooper Industries (Electrical) Inc. TYPE OF EQUIPMENT: Transceiver module (902-928MHz) FCC IDENTIFIER: IA9XPD900 IC Number: 1338B-XPD900 Dear Sir or Madam:

Some of the material included in this application contains trade secrets and proprietary information not customarily released to the public. Because public disclosure of the material might be harmful to the applicant and provide unjustified benefits to its competitors, it is requested that the following be withheld from public disclosure:

Exhibit Type File Name Block Diagram 007-IA9-XPD900_C2PC_BlockDiagram_0.pdf Schematic 005-IA9-XPD900_C2PC_Schematic_0.pdf BOM 006-IA9-XPD900_C2PC_BOM_0.pdf Operational Description 010-IA9-XPD900_C2PC_OperationalDescription_0.pdf Trade secrets and proprietary information can be held confidential. Therefore, we wish to invoke the act under the provisions of 47CFR, Sections 0.457(d) and 0.459. Please contact the undersigned if you have any questions or need any further information. Regards, Patrick Ho Business Manager Mobile Wireless & Embedded Power Email: patrickho@eaton.com Telephone: +1 (604) 472 4718 On behalf of: Cooper Industries (Electrical) Inc.

A ) Eaton A Cooper Industries (Electrical) Inc.

: . 74 ~ 1833 Coast Meridian Road Powering Business Worldwide Port Coquitlam BC Canada V3C6G5 Covered Equipment Certification Attestation Letter September 19, 2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: IASXPD900 Cooper Industries (Electrical) Inc. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not covered equipment. Cooper Industries (Electrical) Inc. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Signed:

Printed name: Patrick Ho Title: Business Manager Company Name: Cooper Industries (Electrical) Inc. Date: 9/15/2023

Eaton Cooper Industries (Electrical) Inc. 74 1833 Coast Meridian Road Port Coquitlam BC Canada V3C6G5 DECLARATION OF CONFORMANCE WITH 202109-001 NOTIFICATION Date: December 4, 2023 To: Federal Communications Commission Equipment Authorization Branch Laboratory Division Office of Engineering and Technology 7435 Oakland Mills Road Columbia, Maryland 21046 Subject: CONFORMANCE WITH 202109-001 NOTIFICATION Applicant: Cooper Industries (Electrical) Inc. TYPE OF EQUIPMENT: Transceiver module (902-928MHz) FCC IDENTIFIER: IA9XPD900 Dear Sir or Madam:

We confirm that all requirements in their 202109-001 notification are met. Requirement 1) The requirements of 2.1043 are fulfilled, i.e., the devices block functions for the fundamental frequency, primary modulator circuit, maximum power, or field strength ratings shall remain unchanged. 2) Transmitter PCB layout and parts changes are only permitted if there is no change in identifying a devices form, functional specification, as initially granted or previously approved under a C2PC. 3) PCB changes are limited to non-substantive modifications layout changes to the same size physical circuit board previously granted. 4) C2PCPX is not permitted to add, remove, augment, or change capabilities, such as transmitters, increased bandwidth, additional rule parts, bands, etc. Explanation We have replaced a VCTCXO with a TCXO of the same frequency. The fundamental frequency, primary modulator circuit, max power stayed the same. No PCB layout changes were done, the same PCB is used. No PCB layout changes were done, the same PCB is used. No change in capabilities were done. 5) In the PAG submission for item C2PCPX, the applicant shall provide complete information on testing demonstrating that the proposed changes for fundamental emissions are unchanged within the normal, acceptable tolerances and out-of-band;

emissions do not exceed the appropriate limits. The PAG submission shall include all applicable test reports and internal photos. 6) The modified device shall not be marketed under the existing grant of certification before confirmation that the C2PCPX PAG is approved and granted. 7) Software Defined Radio (SDR) grants that use the C2PCPX procedure are not permitted to make subsequent Class III permissive changes. 8) The C2PCPX PAG procedure has no impact on the provisions of V) of this publication for non-SDR software-only changes; thus, adding an equipment class when related to rule changes is still permitted. 9) Class I permissive changes are not permitted under this C2PCPX procedure. To process a PAG for C2PCPX, the applicant shall provide a letter in a Class II permissive change filing acknowledging compliance to the preceding items 1) through 9) above. The PAG KDB inquiry shall also include a clear description of the changes under consideration and comparative photos or illustrations of the device (schematics, block diagram, Gerber files, etc., or impacted areas) before and after the implemented modifications. See test report. The modified device will not be marked under existing grant. NA NA Schematics and block diagrams were submitted. The Gerbers were not changed as the PCB stays the same. Regards, Patrick Ho Business Manager Mobile Wireless & Embedded Power Email: patrickho@eaton.com Telephone: +1 (604) 472 4718 On behalf of: Cooper Industries (Electrical) Inc.

Eaton Corporation W126N7250 Flint Dr. Menomonee Falls, Wisconsin 53051 U.S. Agent Designation for Service of Process -

Certification Attestation Letter September 20, 2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: IA9XPD900, FRN: 0008688764 (applicant) Per section 2.911(d)(7) of the FCC rules, Cooper Industries (Electrical) Inc. (the applicant) certifies that the equipment for which authorization is sought is designated to the following U.S. Designated agent* for service of process:

Eaton Corporation Company Name:

Physical U.S. Company Address: W126N7250 Flint Dr., Menomonee Falls, Wisconsin, Agent name:

Agent Email Address:

FRN:

53051 Craig Pytel CraigPytel@eaton.com 0033726845 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed:

Designated Agent Signed:

(Required, if different to Applicant):

Signed:

Printed name:

Title:

Company Name: Cooper Patrick Ho Business Manager Industries (Electrical) Date:

Inc. September 15, 2023 Signed:

Craig Pytel Printed name:

Title:

Product Manager Company Name: Eaton Corporation Date:

September 15, 2023

* the applicant must designate a contact located in the United States for purposes of acting as the applicants agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process.

Eaton Corporation W126N7250 Flint Dr. Menomonee Falls, Wisconsin 53051 U.S. Agent Designation for Service of Process -

Certification Attestation Letter September 20, 2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: IA9XPD900 Per section 2.911(d)(7) of the FCC rules, Cooper Industries (Electrical) Inc. (the applicant) certifies that the equipment for which authorization is sought is designated to the following U.S. Designated agent* for service of process:

Eaton Corporation Company Name:

Physical U.S. Company Address: W126N7250 Flint Dr., Menomonee Falls, Wisconsin, Agent name:

Agent Email Address:

FRN:

53051 Craig Pytel CraigPytel@eaton.com 0033726845 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed:

Designated Agent Signed:

(Required, if different to Applicant):

Signed:

Printed name:

Title:

Company Name: Cooper Patrick Ho Business Manager Industries (Electrical) Date:

Inc. September 15, 2023 Signed:

Craig Pytel Printed name:

Title:

Product Manager Company Name: Eaton Corporation Date:

September 15, 2023

* the applicant must designate a contact located in the United States for purposes of acting as the applicants agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process.

Eaton Cooper Industries (Electrical) Inc. 74 1833 Coast Meridian Road Port Coquitlam BC Canada V3C6G5 October 13, 2023 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Request for Confidentiality FCC FCC ID: IA9XPD900 Pursuant to FCC 47 CFR 0.457(d)(1)(ii) and 0.459 and FCC guidance published in KDB 726920, we hereby request confidential treatment of information accompanying this application as outlined below. We request the exhibits selected below as long term confidential (LTC) be withheld from public view permanently:

Selection of exhibits for LTC - general Permanent (Long Term) Permanent (Long Term) Permanent (Long Term) Permanent (Long Term) Permanent (Long Term) Exhibit name Block Diagrams Operation Description / Theory of Operation Parts List & Placement / BOM Schematics Antenna Design Documents Selection of exhibits for LTC - specific 1 Permanent (Long Term) Permanent (Long Term) Exhibit name Tune-Up Procedure SDR2 Software / Security Info Selection of exhibits for LTC (with NDA) 3 Permanent (Long Term) Permanent (Long Term) Exhibit name Users Manual Internal Photos We also request the exhibits selected below as short term confidential (STC) be withheld from public view for a period of X days 4 from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public:

Selection of exhibits for STC5 Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Exhibit name Block Diagrams Operation Description / Theory of Operation Parts List & Placement / BOM Schematics Users Manual Internal Photos External Photos Test Setup Photos Tune-Up Procedure (for Licensed equipment only) Our company has spent a substantial effort in developing this product and it is one of the first of its kind in the industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. 1 - Tune up procedure is applicable only for licensed equipment. 2 - The FCC rules require that any radio, in which the software is designed or expected to be modified by a party other than the manufacturer that would affect the operating parameters of frequency range, modulation type, maximum output power or other radio frequency parameters outside the range under which the transmitter has been approved in accordance with the FCC rules, must be certified as a software-defined radio (SDR). 3 - These items require further information to be provided to TCB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and review section II, 3) regarding specific information (NDA) that must accompany these requests. 4 - Number of days can be listed up to 180 but should not go past the date of beginning of product marketing/sale. 5 - Any exhibits that may have already been requested to have Permanent confidentiality need not be repeated under Short-Term confidentiality request. Eaton Cooper Industries (Electrical) Inc. 74 1833 Coast Meridian Road Port Coquitlam BC Canada V3C6G5 When the device is marketed before the requested number of days listed above, the grantee will inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. The above information contains trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Sincerely, Signed by:

Signature Patrick Ho Print name Business Manager Title

+1 (604) 472-4718 Phone Cooper Industries (Electrical) Inc. Company 74-1833 Coast Meridian Road, Port Coquitlam, BC, Canada V3C 6G5 Address