FCC ID: 2AX36-INGOT2 Wireless Energy and Water Monitoring Device

Model: Ingot 2 Document Version 110322 Copper Labs, Inc. 2020 INTENDED USE Wireless Energy and Water Monitoring PRODUCT REQUIREMENTS Smartphone running recent iOS or Android operating system. WiFi access point. Compatible wireless utility meter. IMPORTANT SAFETY INFORMATION Read, keep, heed and follow all instructions. Warning: To reduce the risk of fire or electric shock, do not expose this device to rain or moisture. Do not use this device near water or in wet locations. e.g. bathrooms or outdoors. Clean only with dry soft cloth. Household cleaners or solvents can damage the Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat. Unplug this device during lightning storms or when unused for long periods of finish. time. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as plug is damaged or the device has been exposed to rain or moisture, does not operate normally, or has been dropped. The plug should be readily available to disconnect the equipment. Do not expose device to dripping or splashing and do not place objects filled with liquids, such as vases, on the device. This device is not as a toy for usage by children. This device is not for use in safety-critical applications (such as life support) where a failure of the product would reasonably be expected to cause severe personal injury or death. If the equipment is used in a manner not specified by Copper Labs, the protection provided by the equipment may be impaired. SETUP AND INSTALLATION GUIDE Plug the device into an indoor wall socket near your utility meter and WiFi access point to achieve the best wireless coverage. Download the smart phone application from the Apple App Store, Google Play Store or Amazon App Store and follow on-screen instructions. TROUBLESHOOTING AND TECHNICAL ASSISTANCE Please go to copperlabs.com for troubleshooting information or contact support@copperlabs.com technical assistance. POWER SPECIFICATION Pri 100-120VAC, Max 120mA 60Hz WIRELESS SPECIFICATION Wireless RF mode frequency bands 2400 2483 MHz 902 928 MHz ENVIRONMENTAL SPECIFICATION Operation temperature: 0C to 35C Storage temperature: -25C to 60C Relative humidity: 5 to 80% non-condensing Pollution Degree 2 Altitude of up to 2000 meters Indoor use RECYCLING INFORMATION This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead please deliver it to the applicable collection point for the recycling of electrical and electronic equipment. By recycling this product correctly, you will help conserve natural resources and prevent potential negative environmental consequences. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. REGULATORY INFORMATION Any changes or modifications not expressly approved by the manufacturer may void the users authority to operate the equipment under FCC rules. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC RADIATION EXPOSURE STATEMENT This equipment complies with FCCs and ICs RF radiation exposure limits set forth for an uncontrolled environment under the following conditions:

This equipment should be installed and operated such that a minimum separation distance of 20 cm is maintained between the radiator (antenna) &

users/nearby persons body at all times. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

LABEL label Label will be a clear polyester material with thermal printing that is intended to last the lifetime of the device LABEL

2AX36-INGOT2 Copper Labs Inc. Application Examiner FCC Compliance Labeling Attention:

Re:

Applicant:

FCC ID:

To whom it may concern, Request is hereby submitted by Copper Labs Inc. to refrain from placing the 2-part statement physically on the product. This request is made pursuant to 15.19 (a) (5) 5) When the device is so small or for such use that it is not practicable to place the statement specified under paragraph (a) of this section on it, the information required by this paragraph shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. If you have questions or need further information, please contact the undersigned. Sincerely, Signature:

Name:

Title:

Company:

_____________________________________ _____________________________________ _____________________________________ Copper Labs Inc. 3015 Sterling Circle | Suite 200 | Boulder, Colorado | 80301

THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD Authority to Act as Agent Date: November 1st, 2020 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

Nic Johnson of the Nebraska Center for Excellence in Electronics (NCEE Labs) our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b) to the application is subject to denial of federal benefits, that includes FCC benefits.

, We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: ____________________ By:

__________________________ is authorized to act on ______________________

(Print name)

(Signature) ___________________________ Title:

On behalf of: ___________________________

(Company Name) _____________________________ Telephone:

Request for Confidentiality Date: January 26, 2021 Subject: Confidentiality Request for: FCC ID 2AX36-INGOT2 Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent *3 Permanent Permanent Permanent *3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Schematics Test Setup Photos Users Manual Copper Labs has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: NOT APPLICABLE The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180)4___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By:

__________________________ Nic Johnson____________ 3 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 4 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 102920 13