FCC ID: 2AQVC-1045R3A 2.4G dual dimming and color blending remote control

2.4G two-way remote control instructions ABrief introduction of shape of remote controller and function of pressing key 1SHAPE(Size:117(L)X38(W) X14(H)mm) Switch/Pair Code/ Code cleaning The B lights up Turn it up Two-way light The A lights up Dimming Two-way light 2Brief introduction of key function 1 3 5 BBrief introduction of remote control function Dimming:DimThe brightness The A lights up meters(no shielding) 2 Switch/Pair Code/ Code cleaning:

Short press this key to realize the switch function long press this key to code or clear code The B lights up 4 6 Turn it up:Turn up the brightness 1Power Supply:AAA Battery 2;CommunicationType:Wireless RF-2.4G;Control Distance: not less than 20 2The number of Control Lights:The number of Control Lights per remote control is theoretically unlimited(within remote control distance),each lamp up to 4 remote control control. 3Remotr Control Memory Function :In any state,with the remote control to turn off the lights ,and then with the remote control to turn on the lights, for the last time when the state of lights off. Method of operation 1Code-matching: the same switch (city power switch) under the control of the lights (one or more) , power off 10 2Code-cleaning: the same switch (city power switch) under the control of the lights (one or more) , power off 10 seconds after the city power, 30 seconds. seconds after the city power, 30 seconds . FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IC STATEMENT This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. portable device statements The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

DATE: 2021-08-31 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, | appoint Jason Wu of Global United Technology Services Co., Ltd. at No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China to act as our agent in the preparation of this application for equipment certification. | certify that submitted documents properly describe the device or system for which equipment certification is sought. | also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission's regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Cordelia Lighting Inc. and 20101 S. Santa Fe Avenue, Rancho Dominguez, California 90221, United States. Title: Executive Vice President Company: Cordelia Lighting Inc.

Cordelia Lighting Inc. DATE : 2021-08-31 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AQVC-1045R3A Product Name: 2.4G dual dimming and color blending remote control Request for Confidentiality To Whom It May Concern, Pursuant to the provisions of the Commission's rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. JSchematic Diagram X]Block Diagram

&JOperational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

&JExternal Photos

]Test Setup Photos

&X]Internal Photos

>XJUser Manual

(|For 45 days, pursuant to Public Notice DA 04-1705. OR

(XIFor 180 days pursuant to KDB 726920 DO1. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Signature:

wr WA a Names rene Wang Title Executive Vie President Company: Cordelia Lighting Inc.