| Copyright |
Copyright Corecess All rights Reserved. No part of this book shall be reproduced, stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from the publisher. The specifications and information regarding the products in this manual are subject to changed without notice.
| Trademark Credit |
Corecess 3121 is registered trademark of Corecess Inc. Windows is registered trademark of Microsoft Corp. Corecess Inc. 500-2, Sangdaewon-dong, Jungwon-ku, Sungnam-city, Kyungki-do, Korea, 462-120 TEL: +82-31-739-6600 FAX: +82-31-739-6622 http://www.corecess.com Using This Document Thank you for using the product of Corecess. This manual will show you how to set up the Corecess 3121 ADSL modem, and how to customize its configuration to get the most out of your new product. This user manual uses the following conventions:
Note: Introduces useful item for the use of product, reference, and its related materials. Caution: Explains possible situations or conditions of improper operation and possibility of losing data and provides suggestions how to deal with those cases. Table of Contents Introduction ..................................................................... 4 Key Features ............................................................. 4 System Requirement ................................................. 4 Getting to Know the Corecess 3121 ......................... 5 Unpacking the Box ..................................................... 5 Front Panel ................................................................. 6 Rear Panel ................................................................. 7 Connecting Hardware .................................................. 8 Connecting Telephone/ADSL Line .............................. 9 Connecting PC ........................................................... 9 Connecting Console Terminal ..................................... 9 Connecting Power ................................................... 10 Configuring Your Computers .................................... 11 Before you begin ..................................................... 11 Windows XP ............................................................ 11 Windows 2000/NT ................................................... 12 Windows 95/98/ME ................................................. 13 Troubleshooting ........................................................... 14 Technical Specifications ............................................ 16 Introduction The Corecess 3121 is an Asymmetric Digital Subscriber Line (ADSL) modem used for home connectivity to an ADSL service provider network. The Corecess 3121 ADSL modem receives adaptive data rates of up to 24Mbps downstream and transmits 1Mbps upstream. Key Features The Corecess 3121 ADSL modem provides the following key features:
Internal ADSL modem for high-speed Internet access.
10/100Base-T Ethernet router to provide Internet connectivity to all computers on your LAN.
Network address translation (NAT), Firewall, and IP filtering functions to provide security for your LAN.
Network configuration through DHCP Server and DHCP Relay.
Services including IP route and DNS configuration, RIP, and IP and DSL performance monitoring.
Configuration program you access via an HTML browser.
Quality of Service for traffic routed and/or bridged by the modem. System Requirement In order to use the Corecess 3121, you must have the following:
ADSL service up and running on your telephone line, with at least one public Internet address for your computer.
One or more computers with an Ethernet 10Base-T/100Base-T network interface card (NIC).
An Ethernet hub/switch, if you are connecting the device to more than one computer on an Ethernet network.
For system configuration using the supplied web-based program: a web browser such as Internet Explorer v5.0 or later, or Netscape v4.7 or later. 4 Corecess 3121 Installation Guide Getting to Know the Corecess 3121 Unpacking the Box L A N D S L A C T P W R Corecess3121 Corecess 3121 Check the shipping carton carefully to ensure that the contents include the items you ordered.
Corecess 3121 ADSL modem
Power adapter and power cord
Ethernet cable (straight-through type)
Standard phone/DSL line cable
Manual CD Ethernet cable (straight-through type) Phone/DSL line cable(RJ-11) Power adpater Power cord Manual CD Note: The Ethernet cable for the Corecess 3121 should be assembled with a ferrite core which meets the following specification:
Internal diameter:
External diameter:
Length:
9.50mm 18.400.40mm 28.000.40mm Note: The following hardware is not provided but neccssary to install and configure the Corecess 3121. Before installing the Corecess 3121, prepare the following hardware:
Micro-filter or splitter (provided separately by your service provider)
PC with Ethernet port or adapter (optional) Caution: To reduce the risk of fire, use only No. 26AWG or larger telecommunication line cord. 5 Front Panel The front panel contains lights called LEDs that indicate the status of the unit. PW R ACT LAN DSL Green Function
: The Corecess 3121 is powered on.
: The Corecess 3121 is powered off.
: ADSL link is established and active. Color Green On Off On Blinking : ADSL link is training. Off Blinking : ADSL data is sending/receiving through the port. Off On Blinking : Ethernet data is sending/receiving through the port. Off
: No ADSL data.
: LAN link is established and active.
: No ADSL link.
: No LAN link. Green Green Label PWR DSL ACT LAN 6 Corecess 3121 Installation Guide Rear Panel The rear panel contains the ports for the units data and power connections. CONSOL PHONE 5V DC LINE LAN OFF ON Label OFF/ON 5V DC CONSOL LAN PHONE LINE Function Switches the unit on or off. Connects to the supplied power converter cable. Connects the device to a console terminal. Connects the device to your PCs Ethernet port, or to the uplink port on your LANs hub, using the cable provided. Connects the device to a telephone jack for DSL communication. Connects the device to a telephone jack for DSL communication. 7 Connecting Hardware ON OFF LAN LINE 5V DC PHONE CONSOL The Corecess 3121 supports both the POTS splitter and micro-filter phone configurations. Before cabling the Corecess 3121, verify your configuration with your service provider. This section describes how to connect the Corecess 3121 to the phone jack, the power outlet, and your computer or network. The following figure illustrates the hardware connections. The layout of the ports on your device may vary from the layout shown. Refer to the steps that follow for specific instructions. ETHERNET connection: or Hub or switch
(for local area) Console terminal Ethernet cable Ethernet cable Console cable Ethernet cable Power adapter Phone cable ADSL cable
Phone PC PC PC 8 Corecess 3121 Installation Guide OFF ON 5V DC CONSOL LAN PHONE LINE
Connecting Telephone/ADSL Line
Connect the provided ADSL cable to the PHONE port of the Corecess 3121 and a telephone.
Unplug the telephone line from the telephone and plug the line to the LINE port of the Corecess 3121. Connecting PC Connect the provided Ethernet cable to the LAN port of the Corecess 3121 and then connect the other end of the cable to Ethernet port on the NIC installed to your PC. OFF ON 5V DC CONSOL LAN PHONE LINE Note: If you are connecting a LAN to the Corecess 3121, you must use a crossover Ethernet cable
(not provided) to attach a regular hub or switch port. The crossover cable is wired differently than the cable you would use to connect to a hub. When you compare the colored wires on each end of a straight-through cable, they will be in the same sequence; on crossover cables, they will not. Contact your ISP for assistance. Connecting Console Terminal Caution: General users need not to connect a console terminal. It is only for the ADSL Service Provider. Connect a console cable to the CONSOL port of the Corecess 3121 and then connect the other end of the cable to the terminal or a PC. OFF ON 5V DC CONSOL LAN PHONE LINE 9 Connecting Power Caution: You must use the power adapter provided with the Corecess 3121.
Connect the provided power supply cable into the 5V DC port of the Corecess 3121.
Connect the provided power cord to the power supply and connect the other end of the cord to an appropriate electrical outlet. OFF ON 5V DC CONSOL LAN PHONE LINE Caution: You must power on the Corecess 3121 before powering on your PC. If you power on your PC first, PCs IP address may not be properly assigned. 10 Corecess 3121 Installation Guide Configuring Your Computers This section provides instructions for configuring the Internet settings on your computers to work with the Corecess 3121. Before you begin By default, the Corecess 3121 automatically assigns all required Internet settings to your PCs. You need only to configure the PCs to accept the information when it is assigned. Follow the instructions that correspond to the operating system installed on your PC. Caution: When you configure your computer, leave the default value of any other configuration that is not mentioned in the following description. Windows XP 1. In the Windows task bar, click the Start button and then select Control Panel. (Figure 1) 2. Double-click the Network 3. Right-click the Local Area Connection icon at the <Network icon at the <Control Panel> window. Figure 1 Connections> windows and select Properties. (Figure 2) 4. In the <Local Area Connection Properties> dialog box, select the Internet Protocol (TCP/IP) in the This connection uses the following items list and click
. (Figure 3) Figure 2 5. In the <Internet Protocol (TCP/IP) Properties)> dialog box, click the radio button labeled Obtain an IP address automatically. Also click the radio button labeled the Obtain DNS server address automatically. (Figure 4) 6. Click Figure 3 Figure 4 twice to confirm your changes, and close the Control Panel. 11 Windows 2000/NT 1. In the Windows task, click the Start button, point to Settings, and then click Network and Dial-up Connections. (Figure 1) 2. Right-click the Local Area Connection icon at the <Network and Dial-up Connections> windows and then select Properties. (Figure 2) 3. In the <Local Area Connection Properties> dialog box,
. select Internet Protocol (TCP/IP), and then click
(Figure 3) Figure 1 Figure 2 4. In the <Internet Protocol (TCP/IP) Properties> dialog box, click the radio button labeled Obtain an IP address automatically. Also click the radio button labeled Obtain DNS server address automatically.
(Figure 4) 5. Click Figure 3 Figure 4 twice to confirm your changes, and close the Control Panel. 12 Corecess 3121 Installation Guide Windows 95/98/ME 1. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel. (Figure 1) 2. Double-click the Network 3. In the <Network> dialog box, select TCP/IP, and then click icon. (Figure 2) Figure 1 4. In the <TCP/IP Properties> dialog box, click the [IP Address] tab and then click the radio button labeled Obtain an IP address automatically. (Figure 3) 5. Click the [DNS Configuration] tab, and then click the radio button labeled Disable DNS. (Figure 4) 6. Click the [Gateway] tab and ensure that there is no gateway Figure 3 Figure 2 installed. If there are installed gateways, delete them by clicking [Remove]. Click
. (Figure 5) 7. Click twice to confirm and save your changes. You will be prompted to restart Windows. Click
. Figure 4 Figure 5 13 Troubleshooting If you cannot connect to ADSL network, please check the status of the LEDs on the front panel, and then ensure the following:
1. Check the LAN LED If the LAN LED goes off, ensure that the Ethernet cable is firmly connected both to the LAN port on the Corecess 3121 and Ethernet port on the NIC installed to your PC. 2. Check the DSL LED If the DSL LED blinks continuously and never stays solid on, ensure that the DSL cable is firmly connected to the LINE port on the Corecess 3121. If the DSL LED still blinks, contact your ADSL service provider. If the DSL LED goes off, turn off the power of the Corecess 3121 by pressing the power switch and turn on the power again. If DSL LED still blinks, contact your vendor. 3. Check your PCs IP address If all LEDs operate normally and cables are firmly connected to the ports, ensure that your PCs IP address is properly assigned. Otherwise, assign a new IP address according to your operating system. Windows 95/98/ME
Click the Start button and select Run.
Input winipcfg and press the [Enter] key. 14 Corecess 3121 Installation Guide
Select Ethernet adapter connected with the Corecess 3121 and click Release All. Windows 2000/NT/XP
Click the Start button and select Run.
The DOS-prompt appears. Input ipconfig
/release and press [Enter] key. 4. Restart your PC
Click Renew All.
Input cmd and press the [Enter] key.
Input ipconfig /renew and press [Enter] key. If new IP address is not assigned properly or you cannot solve the problem, ensure that the Corecess 3121 turns on and then restart your PC. 15 Technical Specifications Description Specification ADSL Standard
T1.413i2
ITU-T G.992.1(G.dmt)
ITU-T G.992.2(G.lite)
ITU-T G.992.3(G.dmt.bis)
ITU-T G.992.5(ADSL2+) IEEE Standard
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX Ethernet
10/100Base-TX
Connector: RJ-45 ADSL Line
Line Code: DMT (Discrete Multi-Tone)
Downstream: Max 24Mbps
Upstream: Max 1Mbps
Connector: RJ-11
PPP over ATM VCMUX (RFC 2364)
PPP over ATM LLCSNAP (RFC 2364)
Bridged IP over ATM LLCSNAP (RFC 1483)
Routed IP over ATM LLCSNAP (RFC 1483)
Bridged IP over ATM VCMUX (RFC 1483)
Routed IP over ATM VCMUX (RFC 1483)
Classical IP over ATM (RFC 1577)
PPP over Ethernet VCMUX (RFC 2516)
PPP over Ethernet LLCSNAP (RFC 2516)
1 RJ-11 (DSL)
1 RJ-45 (LAN)
1 Power socket (5V DC)
PWR: Indicates DC power status.
DSL : Indicates connection status with ADSL network (physical link).
ACT : Indicates ADSL data activity.
LAN : Indicates connection status and data activity with LAN.
Temperature: 0C ~ 50C
Humidity: 5% ~ 90%
Dimension: 160(W) x 160(D) x 36(H) mm
Weight: 310g
Input: 100-240VAC, 50-60Hz, DC 5V/2A
Power consumption: Max. 6 Watt Standard Interface ADSL Protocol Connector LED Environmental Conditions Physical Conditions Power Requirements 16 Corecess 3121 Installation Guide