FCC ID: 2ANCG-WTM1C10 WTM1C10

MODEL NOWTM1C10 Transmitter of WPC QI BPP Product name : WTM1C10 ENGINEERING SPECIFICATION SHEET Purpose:

This specification document represents the design criteria of the product identified herein, for the approval of the designated recipient (customer). Prior to production and delivery of this product by CWT, the customer shall endorse its approval of this specification document, upon review of the detailed information provided herein. The customers endorsement (approval) verifies that the product description is determined to be fully compliant to the customers design requirements. If one or more samples are included with this specification, the customers endorsement (approval) further verifies that the product has been tested by the customer, for which the product satisfactorily meets all aesthetic, mechanical, electrical, and operating requirements for its intended usage with the customers suitable indoor equipment or applications. To Approve: An authorized employee or agent of the customer shall endorse approval of this specification. Please sign & date this cover-page, and initial each subsequent page in the lower left corner to signify all sections have been read and found to be acceptable. A completed, original copy (signed, dated, initialed) of this specification must be returned to CWT to record the approved customer design. The customer shall keep one or more copies for its records. Upon receipt, CWT shall manufacture the product to the approved customer design. If design revisions are otherwise required, a revised specification and/or modified samples shall be provided by CWT for the endorsement (approval) by the customer. Approved Issued Checked Planned Leo Chen Dylan Ou Customer Signed Channel Well Technology Co., Ltd. ISSUE DATE: 2023-5-31 Revision No.: 0.1 Specification No: WTM1C10 Page: 1 of 10 MODEL NOWTM1C10 Transmitter of WPC QI BPP Product name : WTM1C10 ENGINEERING SPECIFICATION SHEET SPEC. Revision History Date 20230531 Revision No. 0.1 Previous version Current version Change Information Advance ISSUE DATE: 2023-5-31 Revision No.: 0.1 Specification No: WTM1C10 Page: 2 of 10 MODEL NOWTM1C10 Transmitter of WPC QI BPP Product name : WTM1C10 ENGINEERING SPECIFICATION SHEET TABLE OF CONTENTS 1 SCOPE ............................................................................................................................................... 4 1.1 GENERAL DESCRIPTION ................................................................................................................ 4 2 ELECTRICAL SPECIFICATION .................................................................................................. 5 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.7.1 2.7.2 DESIGN STANDARDS ..................................................................................................................... 5 INPUT REQUIREMENT ................................................................................................................... 5 OUTPUT REQUIREMENT ................................................................................................................ 5 NO LOAD CONSUMPTION .............................................................................................................. 5 EFFICIENCY .................................................................................................................................. 5 FREQUENCY ................................................................................................................................. 6 INTERFACE SURFACE .................................................................................................................... 6 Distance .............................................................................................................................. 6 Without metal ...................................................................................................................... 6 LED INDICATE .............................................................................................................................. 6 3 ENVIRONMENTAL SPECIFICATION ........................................................................................ 7 COOLING ...................................................................................................................................... 7 3.1 TEMPERATURE ............................................................................................................................. 7 3.2 HUMIDITY .................................................................................................................................... 7 3.3 3.4 CALCULATED MEAN TIME BETWEEN FAILURES (MTBF) ................................................................. 7 3.5 WEIGHT ....................................................................................................................................... 7 4 REGULATORY COMPLIANCE .................................................................................................... 7 4.1 EMC SPECIFICATION .................................................................................................................... 8 FCC requirements ............................................................................................................... 8 CISPR requirements ............................................................................................................ 8 AGENCIES CERTIFICATIONS .......................................................................................................... 8 Product safety compliance .................................................................................................. 8 4.1.1 4.1.2 4.2 4.2.1 5 MECHANICAL ................................................................................................................................ 8 ISSUE DATE: 2023-5-31 Revision No.: 0.1 Specification No: WTM1C10 Page: 3 of 10 MODEL NOWTM1C10 Transmitter of WPC QI BPP Product name : WTM1C10 ENGINEERING SPECIFICATION SHEET 6 COIL(SPEC) ..................................................................................................................................... 9 1 SCOPE This document describes the basic electrical characteristics of WTM1C10 wireless power transmitter module. WTM1C10 is designed based on the technology of electromagnetic induction. It is a widely used module for many different applications. This is a new concept of charging devices without any wires and cords. 1.1 GENERAL DESCRIPTION WTM1C10 is a Wireless Power Consortium (WPC) Qi 1.2.4 compatible wireless power transmitter module. This transmitter module is Qi certified and can function with devices compatible to Qi standard. This excellent and highly integrated transmitter module is using magnetic induction process technology with stable performance and high reliability. This specification defines the performance characteristics ( include electrical function, EMC, safety, and product test requirements and so on) of a internal signal coil wireless charger (transmitter), which provide configurable charging mode to support WPC Qi 1.2.4 standard. ISSUE DATE: 2023-5-31 Revision No.: 0.1 Specification No: WTM1C10 Page: 4 of 10 MODEL NOWTM1C10 Transmitter of WPC QI BPP Product name : WTM1C10 ENGINEERING SPECIFICATION SHEET 2 ELECTRICAL SPECIFICATION 2.1 DESIGN STANDARDS WTM1C10 with follow WPC QI Wireless Power Transfer System Power Class 0 Specification Power Transmitter A11a. 2.2 INPUT REQUIREMENT The power supply must operate on a DC input voltage 9V with 5% tolerance. Input current should lower than 2A. Input Range Minimum Nominal Maximum 9V 8.55 9 9.45 Unit Vdc Table 1 - Input Voltage Range 2.3 OUTPUT REQUIREMENT The wireless charger can support WPC qi V1.2.4 BPP 5W , downward support BPP 5W, Apple 7.5W, Samsung Fast Charge. 2.4 NO LOAD CONSUMPTION Vin 9V Load No Receiver Power consumption

< 0.15W Table 2 - No load consumption 2.5 EFFICIENCY The efficiency shall be >70% at 9V maximum loading, 5V/1A efficiency measurements are performed at coil center with 2mm vertical distance between TX coil and RX coil. Vin Load Efficiency Receiver ISSUE DATE: 2023-5-31 Revision No.: 0.1 Specification No: WTM1C10 Page: 5 of 10 MODEL NOWTM1C10 Transmitter of WPC QI BPP Product name : WTM1C10 ENGINEERING SPECIFICATION SHEET 9V 5W 70%

IDT P9225 Table 3 - Efficiency 2.6 FREQUENCY The operating frequency is 110~1485 kHz. 2.7 INTERFACE SURFACE 2.7.1 DISTANCE Distance from the Primary Coil to the Interface Surface of the Base Station is dz = 2.00.5 mm across the top face of the Primary Coil. 2.7.2 WITHOUT METAL The Interface Surface of the Base Station extends at least 5.0 mm beyond the outer dimensions of the Primary Coil. 2.8 LED INDICATE LED*/Color Standby Transfer LED1-Red LED2-Blue OFF OFF OFF ON Charge Complete OFF ON Fault Condition Blink 4Hz OFF ISSUE DATE: 2023-5-31 Revision No.: 0.1 Specification No: WTM1C10 Page: 6 of 10 MODEL NOWTM1C10 Transmitter of WPC QI BPP Product name : WTM1C10 ENGINEERING SPECIFICATION SHEET Table 4 - LED indicate 3 ENVIRONMENTAL SPECIFICATION 3.1 COOLING Natural Air Cooling 3.2 TEMPERATURE Operation within specification: -10 to 50 degrees C. Storage: -20 to 85 degrees C 3.3 HUMIDITY Operation: 10% to 85% relative humidity, non-condensation. Storage: 10% to 85% relative humidity, including condensation. 3.4 CALCULATED MEAN TIME BETWEEN FAILURES (MTBF) Wireless charging module shall have a calculated MTBF of greater than 400,000 hours, calculated utilizing MIL-HDBK-217F with the following assumptions:

Output load: Rated full load Ambient temperature: 25 degrees C 3.5 WEIGHT

<70g 4 REGULATORY COMPLIANCE ISSUE DATE: 2023-5-31 Revision No.: 0.1 Specification No: WTM1C10 Page: 7 of 10 MODEL NOWTM1C10 Transmitter of WPC QI BPP Product name : WTM1C10 ENGINEERING SPECIFICATION SHEET 4.1 EMC SPECIFICATION 4.1.1 FCC REQUIREMENTS WTM1C10 shall comply with the radiated and conducted emission requirements for FCC Part 15 Class B. 4.1.2 CISPR REQUIREMENTS WTM1C10 shall comply with the radiated and conducted emission requirements for CISPR 22 Class B. 4.2 AGENCIES CERTIFICATIONS The WTM1C10 is designed to meet Comply to WPC QI V1.2.4 BPP compliance testing, and will also be tested by the relevant verification unit 4.2.1 PRODUCT SAFETY COMPLIANCE Certification FCC(option) NCC(option) Certification CE(option) BSMI(option) WPC QI BPP(option) Table 5 - safety compliance 5 MECHANICAL Refer to drawing ISSUE DATE: 2023-5-31 Revision No.: 0.1 Specification No: WTM1C10 Page: 8 of 10 MODEL NOWTM1C10 Transmitter of WPC QI BPP Product name : WTM1C10 ENGINEERING SPECIFICATION SHEET 6 COIL(SPEC) FCC Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (

2) this device must accept any interference received, including interference that may cause undesired operation. ISSUE DATE: 2023-5-31 Revision No.: 0.1 Specification No: WTM1C10 Page: 9 of 10 MODEL NOWTM1C10 Transmitter of WPC QI BPP Product name : WTM1C10 ENGINEERING SPECIFICATION SHEET Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. FCC/IC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 15 cm between the radiator and your body. 1. Cet metteur ne doit pas tre situ au mme endroit ou fonctionner en conjonction avec une autre antenne ou un autre metteur. 2. Cet quipement est conforme aux limites d'exposition aux rayonnements IC dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis une distance minimale de 15 cm entre le radiateur et votre corps. ISSUE DATE: 2023-5-31 Revision No.: 0.1 Specification No: WTM1C10 Page: 10 of 10

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name CoreStar Co., Ltd Address Grantee Code FCC ID No. 16-3, Shunping 1st St., Xitun Dist., Taichung City, 40754, Taiwan 2ANCG 2ANCG-WTM1C10 Authorized Contact Name Daniel Lin Contact Email Contact Phone daniel@corestar.com.tw

+886-4-2295-0350 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, c) d) e) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) g) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List CoreStar Co., Ltd (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. CoreStar Co., Ltd (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to 1.50002, as an entity producing covered equipment. Applicant Signature:

Date: 2023/6/8 Print Name:

Title:

Daniel Lin

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021

CoreStar Co., Ltd Date: 2023/6/8 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ANCG-WTM1C10 To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Bonnie Liao in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with applicant company FCC. This authorization is valid until further written notice from the applicant. Name (Printed): Daniel Lin Title: -

<, _ Signature: AN _ | bie On behalf of Company: CoreStar Co., Ltd

CoreStar Co., Ltd To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: CoreStar Co., Ltd No. 16-3, Shunping st St., Xitun Dist., Taichung City, 40754, Taiwan Regarding: Confidentiality Request regarding application for FCC ID: 2ANCG-WTM1C10 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Name (Printed): Daniel Lin Title: -

nw On behalf of Company: CoreStar Co., Ltd

CoreStar Co., Ltd Cover LetterWireless Charger Approval FCC ID: 2ANCG-WTM1C10 Date: 2023/6/8 To whom it may concern:

Theres a WTM1C10, that would like to have your authorization as an Inductive wireless power transfer applications approval. The specific product as below, WTM1C10, with its designed features and specified description, meets special requirements for KDB 680106 D01 section 5.2 requirements. Company:

Product Name:

Model Number:

FCC ID:

CoreStar Co., Ltd WTM1C10 WTM1C10 2ANCG-WTM1C10 KDB 680106 D01 Section 5.b) Requirements:

Product Technical Specification Result:

(1) Power transfer frequency is less than 1 MHz. 113.3-148.2kHz

(2) Output power from each primary coil is less than or equal to 15 watts. 10Watts Complied Complied

(3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. Only single primary coils Complied

(4) Client device is placed directly in contact with the transmitter. The WPT client device is placed in direct contact with the WPT source. Complied

(5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion).

(6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Mobile exposure condition Complied Refer to MPE report GZCR230600054502 Complied Sincerely, Name (Printed): Daniel Lin Title: -

Signature:

On behalf of Company: CoreStar Co., Ltd

UNITED STATES DESIGNATED AGENT LETTER Date: 2023/6/8 TO Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: CoreStar Co., Lid Company Name: Spirit Manufacturing Inc Grantee Code: 2ANCG FRN: 0032924648 FRN 0026750745 Contact Name: Daniel Lin Contact Name: Ken Kruebbe Address: No. 16-3, Shunping 1st St, Address: 3000 Nestle Rd Xitun Dist. Ciy/Province/Zip: Taichung City, 40754 City/Province/Zip: Jonesboro, AR 72401 Country Taiwan Country United States Telephone: +886-4-2295-0350 Telephone: (972) 533-7856 Fax +886-4-2295-0357 Fax: -

Email: daniel@corestar.com.tw Email: ken.kruebbe@spiritfitness com Applicable Equipment: FCC ID: 2ANCG-WTM1C10 ATTN: Director of Certification:

We, CoreStar Co., Ltd and Spirit Manufacturing Inc, understand and acknowledge the applicants consent and the designated agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above, We. CoreStar Co., Ltd and Spirit Manufacturing Inc, acknowledge the applicant's acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name: Daniel Lin Name: Ken Kruebbe Title: RD Project Manager Title: VP Product Development & Marketing Signature: Signature: & fob loth. hs J