FCC ID: 2ATSM-TGRFCM1 IO Link wireless 2.4G band transceiver module

TigoRFcore User Guide Revision 0.1 Sep. 19, 19 Page 1 of 8 Copyright 2019 CoreTigo Ltd. TigoRFcore User Guide Contents Approval Table ................................................................................................................................................................................................. 2 Revision Control .............................................................................................................................................................................................. 3 1 Overview ................................................................................................................................................................................................... 4 2 Specification ............................................................................................................................................................................................. 4 3 Application and Implementation .................................................................................................................................................... 5 3. 3. 3. 3. 3. 1 2 3 4 4.4 4.5 Power source ................................................................................................................................................................................. 5 External clock ................................................................................................................................................................................ 5 Reset .................................................................................................................................................................................................. 5 GPIO ................................................................................................................................................................................................... 5 UART ................................................................................................................................................................................................. 6 4 3. RF port .............................................................................................................................................................................................. 6 5 Certification and Regulation ............................................................................................................................................................. 7 6 4.1 RF Exposure Warnings .............................................................................................................................................................. 7 4.2 Class A Warnings .......................................................................................................................................................................... 7 4.3 Modification Statements ........................................................................................................................................................... 7 FCC Regulatory Notices ............................................................................................................................................................. Limited Modular Approval ....................................................................................................................................................... 8 7 Table of Figures:

Figure 1: TigoRFcore ...................................................................................................................................................................................... 4

: UART Interface .............................................................................................................................................................................. 6 Figure Table of Tables:

Table 1: Approval Table................................................................................................................................................................................ 2 Table 2: Revision Control ............................................................................................................................................................................. 3 2 Approval Table Role Name Written By Yaniv Yardeni Reviewed By Approved By Table 1: Approval Table Version Date 0.1 09/09/19 Page 2 of 8 CONFIDENTIAL Copyright 2019 CoreTigo Ltd. Author Name Description Revision Date Yaniv Yardeni Creation 0.1 09/09/19 TigoRFcore User Guide Revision Control Table 2: Revision Control Page 3 of 8 CONFIDENTIAL Copyright 2019 CoreTigo Ltd. TigoRFcore User Guide 1 Overview TigoRFcore Module is a complete physical layer solution for IO-Link Wireless. The module enables a compact, robust and efficient solution for Industry 4.0 applications such as IO-Link Wireless. Figure 1: TigoRFcore 2 Specification Radio:

Output power: 10dBm Frequency band: 2.4-2.48GHz Channel BW: 1MHz Modulation: GFSK Electrical:

Physical:

Input power: 3.3V D, 1.8V DC Physical interfaces:

UART, GPIO Clock:

Internal XO 38.4MHz External slow clock 32.768kHz Footprint: 33 Terminals, 0.8mm Pitch, 7 7 1.4 [mm]

Wight: 0.2g Operating temperature: -40C ~ +85C Page 4 of 8 CONFIDENTIAL Copyright 2019 CoreTigo Ltd. TigoRFcore User Guide 3 Application and Implementation Power source 3. DC power of 3.3V and 1.8V should be supplied to the power input ports:

1 2 Supply 1.8V DC to Pin number 18 VDD_IO Supply 3.3V DC to Pin number 12 VBAT External clock 3. Slow clock of 32.768kHz should be provided for module startup. Supply slow clock to pin number 8 - SLOW_CLK_IN Reset 3. For resetting the module apply GND to pin number 16 nSHUTD, for releasing reset apply 1.8V 3 DC GPIO 3. This GPIO is used for general purpose, may be used for debugging HW/SW issues for development. 4 Pin 23 IO1 Page 5 of 8 CONFIDENTIAL Copyright 2019 CoreTigo Ltd. TigoRFcore User Guide UART 3. External patches can be downloaded from the host to the module through the UART interface. UART interface support adjustable baud rates between 9600bps to 4Mbps 5 UART configuration:

Pin 1 - UART_CTS Pin 2 - UART_TX Pin 3 - UART_RX Pin 4 - UART_RTS Figure 2: UART Interface 3.7 RF port RF port is used to connect the module to the antenna. This port should be matched to 50ohm for best RF performance RF port pin 14 Page 6 of 8 CONFIDENTIAL Copyright 2019 CoreTigo Ltd. TigoRFcore User Guide 4 Certification and Regulation FCC ID: 2ATSM-TGRFCM1 4.1 RF Exposure Warnings RF Exposure Warnings This device is only authorized for use in a mobile application. At least 20 cm of separation distance between the TigoRFcore module and the users body must always be maintained . 4.2 Class A Warnings The FCC Wants You to Know This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. 4.3 Modification Statements FCC Warning (Modification statement) CoreTigo LTD has not approved any changes or modifications to this device by the user. Any changes or modifications could void the users authority to operate the equipment. Interference statement 4.4 FCC Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Wireless notice This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guideline. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Page 7 of 8 CONFIDENTIAL Copyright 2019 CoreTigo Ltd. TigoRFcore User Guide 4.5 Limited Modular Approval List of applicable FCC rules The requirement for KDB 996369 D03:

Summarize the specific operational use conditions FCC CFR Title 47 Part 15 Subpart C Section 15.247 This module has been granted Limited Modular Approval for mobile applications. OEM integrators for host products may use the module in their final products without additional FCC certifications if they meet the following conditions. Otherwise, additional FCC approvals must be obtained. The host product with the module installed must be evaluated for simultaneous transmission requirements. The users manual for the host product must clearly indicate the operating requirements and conditions that must be observed to ensure compliance with current FCC RF exposure guidelines. To comply with FCC regulations limiting both maximum RF output power and human exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed: https://www.inventeksys.com/2-4ghz-antenna-sma/

A label must be affixed to the outside of the host product with the following statement:

This device contains FCC ID: 2ATSM-TGRFCM1 The final host / module combinations may also need to be evaluated against the FCC Part 15B criteria for unintentional radiators in order to be properly authorized for operation as a Part 15 digital device. Information on test modes and additional testing requirements Additional testing, Part 15 Subpart B disclaimer Date transfer module demo board can control the EUT work in RF test mode at specified test channel. The module without unintentional-radiator digital circuit, so the module does not required an evaluation Limited module procedures by FCC Part 15 Subpart B. The host should be evaluated by the FCC Subpart B. The module has not its own antenna, the host meets the necessary requirements to satisfy the Trace antenna designs module limiting conditions. RF exposure considerations Not applicable. The host device manufacturer should confirm that a separation distance of 20 cm or more should be Antennas maintained between the antenna of this host device and persons during the host device operation. The device itself has no antenna, customer can use the PCB antenna, Ceramic antenna or FPC antenna Label and compliance information with antenna gain isn't greater than 2.15dBi. If this certified module is installed inside the host device, then the outside of the host must be labeled with Contains FCC ID: 2ATSM-TGRFCM1. Page 8 of 8 CONFIDENTIAL Copyright 2019 CoreTigo Ltd.

Certification Service Agreement Certification Service Agreement Introduction This Certification Service Agreement was written to cover the Scope of Service and Certification holder/

grantee responsibilities for the countires/domains that MiCOM Labs can issue compliance certificates under its ISO 17065 accreditation status USA (FCC), Canada (ISED), Japan (MIC) and European Union. General Requirements This Service Agreement covers the requirements of the following four certification schemes as operated by MiCOM Labs Certification;

Country Recognition Body Designation Identification No. USA Federal Communications Commission (FCC) Canada Canada ISED Japan MIC (Ministry of Internal Affairs and Communication) TCB FCB RCB European Commission Europe 1.The certification holder/grantee acknowledges and agrees to the following;-

NB US0159 US0159 R210 NB 2280

(a) always fulfills the certification requirements, including implementing appropriate changes when they are communicated by MiCOM Labs;

(b) ensures the product for which a Certificate is issued always fulfils the product compliance requirements under the certification scheme and that all ongoing production of the certified product continues to fulfill the product requirements and agrees that if the conditions under which the Certification was issued are not met, that the Certification will not be valid and will be revoked;

(c) makes all necessary arrangements for:

1) the conduct of the evaluation and surveillance (if required), including provision for examining documentation and records, and access to the relevant equipment, location(s), area(s), personnel, and certification holder / grantee's subcontractors;

2) investigation of complaints;

3) the participation of observers, if applicable;

(d) makes claims regarding certification consistent with the scope of certification;

(e) does not use its product certification in such a manner as to bring MiCOM Labs into disrepute and does not make any statement regarding its product certification that MiCOM Labs may consider misleading or unauthorized;

(f) upon suspension, withdrawal, or termination of certification, the certification holder / grantee discontinues its use of all advertising matter that contains any reference thereto and takes action as required by the certification scheme (e.g. the return of certification documents) and takes any other required measures;

(g) if the certification holder/ grantee provides copies of the certification documents to others, the documents shall be reproduced in their entirety or as specified in the certification scheme;

Page 1 of 7 MiCOM Labs, 575 Boulder Court, Pleasanton, CA 94566 Tel: +1 (925) 462-0304, Fax: +1 (925) 462-0306, Web: www.micomlabs.com Doc#: Single Certification Service Agreement Rev 1.2 Certification Service Agreement

(h) in making reference to its product certification in communication media such as documents, brochures or advertising, the certification holder/ grantee complies with the requirements of MiCOM Labs or as specified by the certification scheme;

(i) complies with any requirements that may be prescribed in the certification scheme relating to the use of marks of conformity, and that conformity marks are only on specific products found to comply with the requirements, and on information related to the product;

(j) keeps a record of all complaints made known to it relating to compliance with certification requirements and makes these records available to MiCOM Labs when requested, and:

1) takes appropriate action with respect to such complaints and any deficiencies found in products that affect compliance with the requirements for certification. 2) documents the actions taken. 2. MiCOM Labs will issue Certification that is valid for the specified equipment as it is presented at the time of certification. The certification holder / grantee will inform MiCOM Labs, without delay, of changes that may affect its ability to conform with any of the requirements under the certification scheme. Some examples of this may be, but are in no way limited to the following;-

Product modifications; Changes in the chassis material, chassis gasket methodology / material, grounding, antenna gain, antenna type, shielding material, modification of transmissions lines, changes to transmission line matching circuitry, operating duty cycle, change of product usage, operating frequency, bandwidth, transmit power / EIRP);

Changes to; the Legal, commercial, organizational status; contact address and production sites. Such modifications shall require additional approval in the form of a review and amendment to the original product certification and changes to the product certification records including the certificate. 3. MiCOM Labs shall exercise the control as specified by the certification scheme over ownership, use and display of licenses, certificates, marks of conformity, and any other mechanisms for indicating a product is certified. Incorrect references to the certification scheme, standards or misleading use of licenses, certificates, marks, or any other mechanism for indicating a product is certified, found in documentation or other publicity, shall be dealt with by suitable action by MiCOM Labs and/or the appropriate regulatory authority. 4. Confidentiality - MiCOM Labs will hold all forms and documents that make up the certification application confidential and will not release any information to third parties without written consent from the applicant. Page 2 of 7 MiCOM Labs, 575 Boulder Court, Pleasanton, CA 94566 Tel: +1 (925) 462-0304, Fax: +1 (925) 462-0306, Web: www.micomlabs.com Doc#: Single Certification Service Agreement Rev 1.2 Certification Service Agreement General Terms and Conditions:

DOCUMENTATION Documentation required for evaluation of the certification application must be provided in its entirety. Technical evaluation of the application will not begin until all of the required documentation is made available to MiCOM Labs. Applicant agrees to be fully liable for the quality and accuracy of the application and all documentation provided for certification purposes. Requests for additional application documentation (corrected / additional forms; attestation letters, application exhibits, technical information, etc) shall be delivered to MiCOM within 60 days of the request. Failure to provide the requested documentation within this timeframe may result in dismissal of the certification application or may incur the full fee. Electronic Signatures MiCOM Labs, Inc. uses an event driven cloud based system to manage certification programs. Client electronic signatures may be used on an as needed basis at key stages in the certification process as a record of agreement/acknowledgement on application and certification details. I acknowledge and agree to the above terms and conditions in their entirety. Signature:

Name:

Ofer Blonskey Title:

VP R&D Company: CoreTigo Ltd Date:

2019-09-23 Page 3 of 7 MiCOM Labs, 575 Boulder Court, Pleasanton, CA 94566 Tel: +1 (925) 462-0304, Fax: +1 (925) 462-0306, Web: www.micomlabs.com Doc#: Single Certification Service Agreement Rev 1.2 Certification Service Agreement Annex A - FCC Certification Scheme The following requirements apply for FCC in addition to the General Requirements. A1) Confidentiality - MiCOM Labs will hold all forms and documents that make up the certification application confidential and will not release any information to third parties without written consent from the applicant. Under the FCC certification scheme MiCOM Labs is required to upload product application information to the FCC regulatory web site in order to issue certification and product(s) to be listed in the FCC website. A2) The certification holder / grantee are required to make provision to have production samples available for at least one year after the last production date and may be required to submit samples of the equipment for post-market surveillance testing in accordance with the current FCC requirements. These samples may be requested, at any time, by either MiCOM Labs or the FCC. A3) All conditions in this Service Agreement are based on current FCC requirements. In case of conflict the latest FCC requirements will take precedence over this agreement. US Federal Communications Commission The following documents WILL BE publically available on the FCC web site after certification is granted:

Test Reports (RF, EMC, SAR, HAC etc..) External product photos. Internal product photos. Cover letters (confidentiality requests, etc) User manual(s) Label drawings and label placement drawings Page 4 of 7 MiCOM Labs, 575 Boulder Court, Pleasanton, CA 94566 Tel: +1 (925) 462-0304, Fax: +1 (925) 462-0306, Web: www.micomlabs.com Doc#: Single Certification Service Agreement Rev 1.2 Certification Service Agreement Annex B - Canada ISED FCB Certification Scheme The following requirements apply for Canada ISED (Innovation, Science and Economic Development Canada) in addition to the General Requirements. B1) Confidentiality - MiCOM Labs will hold all forms and documents that make up the certification application confidential and will not release any information to third parties without written consent from the applicant. Under the Canada ISED certification scheme MiCOM Labs is required to upload product application information to the Canada ISED regulatory web site in order to issue certification and products to be listed in the ISED REL (Radio Equipment List) website. B2) The certification holder / grantee are required to make provision to have production samples available for at least one year after the last production date and may be required to submit samples of the equipment for post-market surveillance testing in accordance with the current Government of Canada ISED requirements. These samples may be requested, at any time, by either MiCOM Labs; or Canada ISED. B3) All conditions in this Service Agreement are based on current Canada ISED requirements. In case of conflict the latest ISED requirements will take precedence over this agreement. B4) Currently, none of the documents provided to Government of Canada ISED are made available to the public

(However clients should note that items may be subject to disclosure under the provisions of "Access to Information Act) The following product information will be publically viewable on the Government of Canada ISED web site. Certificate Holder, name and address and contact information Operating frequency range of the certified product Transmit power (and / or EIRP / field strength) of the certified product Applicable RSS Standard Emission designation Product technical details requested in MiCOM Labs Canada ISED Certification Application form # RSP-100 Page 5 of 7 MiCOM Labs, 575 Boulder Court, Pleasanton, CA 94566 Tel: +1 (925) 462-0304, Fax: +1 (925) 462-0306, Web: www.micomlabs.com Doc#: Single Certification Service Agreement Rev 1.2 Certification Service Agreement Annex C - Europe Notified Body Certification Scheme The following requirements apply for Europe in addition to the General Requirements. C1) Use the CE mark only on specific products that have been found to comply with the requirements. C2) Apply a mark to each product, product packaging, and information accompanying each product, as required by the applicable Directives. C3) The manufacturer shall keep a copy of the EU-type examination certificate, its annexes and additions together with the technical documentation at the disposal of the national authorities for 10 years after the apparatus has been placed on the market. Reference; EMC Directive 2014/30/EU Annex III Section 7 & RED Directive 2014/53/EU Annex III Section 7 The manufacturer shall inform the notified body that holds the technical documentation relating to the EU-type examination certificate of all modifications to the approved type that may affect the conformity of the apparatus with the essential requirements of this Directive or the conditions for validity of that certificate. Such modifications shall require additional approval in the form of an addition to the original EU-type examination certificate. Reference; EMC Directive 2014/30/EU Annex III Section 8 & RED Directive 2014/53/EU Annex III Section 8 MiCOM Labs Certification shall inform its notifying authority concerning the EU-type examination certificates and/or any additions thereto which it has issued or withdrawn, and shall, periodically or upon request, make available to its notifying authority the list of such certificates and/or any additions thereto refused, suspended or otherwise restricted. MiCOM Labs Certification shall inform the other Notified Bodies concerning the EU-type examination certificates and/or any additions thereto which it has refused, withdrawn, suspended or otherwise restricted, and, upon request, concerning such certificates and/or additions thereto which it has issued. MiCOM Labs Certification shall inform the Member States of EU-type examination certificates it has issued and/or additions thereto in those cases where harmonised standards the references of which have been published in the Official Journal of the European Union have not been applied or not been fully applied. The Member States, the Commission and the other Notified Bodies may, on request, obtain a copy of the EU-type examination certificates and/or additions thereto. On request, the Member States and the Commission may obtain a copy of the technical documentation and the results of the examinations carried out by the Notified Body. MiCOM Labs Certification shall keep a copy of the EU-type examination certificate, its annexes and additions, as well as the technical file including the documentation submitted by the manufacturer for 10 years after the radio equipment has been assessed or until the expiry of the validity of that certificate. Reference; EMC Directive 2014/30/EU Article 32, RED Directive 2014/53/EU Article 34 Where, in the course of the monitoring of conformity following the issue of a certificate, a Notified Body finds that an apparatus no longer complies, it shall require the manufacturer to take appropriate corrective measures and shall suspend or withdraw the certificate if necessary. Where corrective measures are not taken or do not have the required effect, the Notified Body shall restrict, suspend or withdraw any certificates, as appropriate. All conditions in this Service Agreement are based on current European and MRA requirements. In case of conflict the latest requirements will take precedence over this agreement. Page 6 of 7 MiCOM Labs, 575 Boulder Court, Pleasanton, CA 94566 Tel: +1 (925) 462-0304, Fax: +1 (925) 462-0306, Web: www.micomlabs.com Doc#: Single Certification Service Agreement Rev 1.2 Certification Service Agreement Annex D - Japanese MIC RCB Certification Scheme The following requirements apply for Japanese MIC (Ministry of Internal Affairs and Communications) in addition to the General Requirements. D1) Applicant hereby declares that the structure of the high frequency and modulation part of the radio, except antenna system in the applying device is designed not to be tampered with or modified by the end user. D2) Applicant agrees to allow disclosure of Application, Documents and Test Report, Certificates issued by MiCOM Labs, upon demand, to The Ministry of Internal Affairs and Communications, Japanherein referred to as MICby MiCOM Labs Inc as a Recognized Certified Body. Documents disclosed to MIC will be exempt from all Non-Disclosure agreements. D3) All conditions in this Service Agreement are based on current Japanese and MRA requirements. In case of conflict the latest requirements will take precedence over this agreement. The following product information will be made available to the Japanese MIC. Test report(s) External product photographs MiCOM Labs Certificate of Compliance that includes but is not limited to the following information;

Approval Holder name and address details Applicable Japan Standard(s) Operating frequency range of the certified product Transmit power of the certified product Emission designators Product Hardware & Firmware versions Page 7 of 7 MiCOM Labs, 575 Boulder Court, Pleasanton, CA 94566 Tel: +1 (925) 462-0304, Fax: +1 (925) 462-0306, Web: www.micomlabs.com Doc#: Single Certification Service Agreement Rev 1.2

CoreTigo Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 09-23-2019 Subject; Request for Confidentiality FCC ID: 2ATSM-TGRFCM1 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Ofer Blonskey Title: VP R&D

CoreTigo Ltd Letter of Authorization Company: CoreTigo Ltd Address: Giborey Israel 5, Poleg, Natanya, Israel 4250405 Product Name: IO Link wireless 2.4G band transceiver module Model Number(s): TigoRFcore M1 Product Description: IO Link wireless 2.4G band transceiver module We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Ofer Blonskey Title:

VP R&D Company: CoreTigo Ltd Date: 2019-09-23

TigoRFcore Modular Approval Justification Modular Approval Justification Revision 0.11 November 17, 2019 All information presented in this document is confidential and for internal use only. Copyright 2017, CoreTigo Ltd. Page 1 of 3 TigoRFcore Modular Approval Justification Giborey Israel 5, Poleg, Natanya, Israel 4250405 CoreTigo Ltd RE FCC ID: 2ATSM-TGRFCM1 To the certification reviewer:

Options We are hereby applying for limited modular approval of the above-referenced FCC ID, based on compliance with most of the criteria as detailed below. Sincerely, X Ofer Blonskey VP R&D Part 15 Unlicensed Single Limited Modular Transmitter Approval Justification per 15.212 Requirement per 15.212

(i)

(ii) The radio elements of the modular transmitter must have their own RF shielding. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided).

(iii) The modular transmitter must have its own power supply regulation.

(iv) The modular transmitter must comply with the antenna and transmission system requirements of 15.203, 15.204(b) and 15.204(c).The antenna must either be permanently attached or employ a unique antenna coupler

(at all connections between the module and the antenna, including the cable).

(v) The modular transmitter must be tested in a stand-

alone configuration, i.e., the module must not be inside another device during testing for compliance with Part 15 parameters.

(vi) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying identification number. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. its FCC All information presented in this document is confidential and for internal use only. Copyright 2017, CoreTigo Ltd. Yes / No Yes Yes Yes reference Shielding is provided by a metal cover over the circuitry All modulation and data inputs are buffered by circuitry on chip. Power supply regulation is provided inside the Radio chip, over supply range of 1.7V to 4.8V volts for VDD_IN and 1.62V to 1.92V for VDD_IO. No for limited modular approval: the intended application for professional installation only. is Yes Yes Testing was performed with the module extended outside of the host on a special extender board, as shown in the test setup photos. The modular transmitter label is provided as described in the user manual, showing the FCC identifier of the module. Please refer to the user manual Page 2 of 3 Blonskey Ofer rules or operating TigoRFcore Modular Approval Justification

(vii) The modular transmitter must comply with any specific that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with to explain any such requirements. A copy of these instructions must be in included equipment authorization. requirements the module application the for Yes The module complies fully with the operating requirements of Part 15 section as demonstrated in the test report.

(viii) The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. Yes The modular transmitter complies with this requirement, please refer to RF exposure report All information presented in this document is confidential and for internal use only. Copyright 2017, CoreTigo Ltd. Page 3 of 3