FCC ID: OJFE62-N2-37 Booster

Everon 6200 Specification Sheet Corning Everon 6200 is a digital transport platform supporting cellular and public safety technologies on fiber optic cable using the CPRI (non-packetized) protocol. The digital radio supports 8 x 3GPP bands with a combined EiRP value of almost 1 watt utilizing integrated antennas for cellular and Bluetooth beaconing, and backhaul connectivity for noncellular technologies. This platform is capable of supporting 5G technology from 360 MHz to 3.8 GHz, plus future RAN virtualization. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC License to operate this device. NOTE: Only authorized person can enter the area where the antenna is installed. And the person is fully aware of the potential for exposure and can exercise control over his or her exposure by leaving the area or by some other appropriate means. Awareness of the potential for RF exposure in a workplace or similar environment can be provided through specific training as part of a RF safety program. Corning Optical Communications Everon 6200 Specification Sheet | CMA-792-AEN | Page 1 E62-A2 Access Unit Chassis The E62-A2 Access Unit Chassis is a standard 19-inch 1U rack-mounted shelf, which serves as the host for Everon 6200. The E62-A2 provides coupling access to radio signal sources of multioperator, multisystem, and multiband, forming digital optical signals and distributing static capacity distribution to fiber-connected slave devices. One A2 supports up to eight optical interfaces connected to EUs (Expansion Units) or RUs (Radio Units). The Active Combiner module specified with the band is the interface to the operator base station equipment. Each module has four QMA ports for signal input from the maximum four operators. One Access Unit can be equipped with up to four modules. E62-AU-AC Active Combiner Module The E62-AU-AC Active Combiner module is the in module has four QMA ports for signal input from the maximum four operators. One Access Unit can be equipped with up to four modules. In accordance with wireless service provider standards, it is not advised to use digital repeaters as a signal source for Corning solutions. terface to the operator base station signal source equipment. Each E62-E2-O Expansion Unit Corning Optical Communications Everon 6200 Specification Sheet | CMA-792-AEN | Page 2 The E62-E2-O Expansion Unit is a standard 19-inch 1U rack-mounted shelf, which serves as the interface between the Master A2 and the Remote Unit. The E62-E2-O provides IP backhaul connection to all RUs, enabling Wi-Fi integration and other Gigabit Ethernet services deployed in a HetNet environment. The EU-O is the unit to expand the system. E62-N2RU Low-Power Remote Unit The E62-N2RU is a low-power remote unit supporting cellular technologies on fiber optic cable using the CPRI protocol. The N2 is ideal for multioperator multiband, static capacity distribution deployments of cellular services in small-to-medium coverage areas. The N2 supports up to eight 20 dBm RF channels. The N2 converts an optical signal to RF and then transmits at the relevant 3GPP band and receives the analog RF signal, conditions it, and converts it back to optical for routing to the E2 or A2. E62-M2RU Medium-Power Remote Unit The E62-M2RU is a medium power remote unit supporting cellular technologies on fiber optic cable using the CPRI protocol. The M2 is ideal for multi-operator multi-band, static capacity distribution deployments of cellular services in medium to large coverage areas. The M2 supports up to 37 dBm output per band in single 4T4R or dual 2T2R up to 100 MHz per band. The M2 converts an optical signal to RF and then transmits at the relevant 3GPP band and receives the analog RF signal, conditions it, and converts it back to optical for routing to the E2 or A2. Corning Optical Communications Everon 6200 Specification Sheet | CMA-792-AEN | Page 3 E62-HPRU High-Power Remote Unit The E62-HPRU is a high-power remote unit supporting cellular technologies on fiber optic cable using the CPRI protocol. The HP is ideal for multioperator multiband, static capacity distribution deployments of cellular services in large coverage areas. The HP supports up to 43 dBm output per band in single 2T2R or dual 1T1R up to 80 MHz per band. The HP converts an optical signal to RF and then transmits at the relevant 3GPP band and receives the analog RF signal, conditions it, and converts it back to optical for routing to the E2 or A2. Corning Optical Communications Everon 6200 Specification Sheet | CMA-792-AEN | Page 4 System Topology BTS RRU CPOI A2 E2 RU HPRU/H2RU/H2-7 2*20W M2RU 4*5W N2RU 8*0.1 Corning Optical Communications Everon 6200 Specification Sheet | CMA-792-AEN | Page 5 Specifications E62-A2 Access Unit Chassis Supported Bands Band 600 MHz 700 MHz Lower 700 MHz Upper 700 MHz Safety 800 MHz 850 MHz 850E MHz 900 MHz 1900 MHz 2100 MHz 2300 MHz 71 12 13 14 20 5 26 8 25 66 30 41 48 2500MHz TDD 3600MHz CBRS Interfaces Optical Connector Type 3GPP Band Downlink Max Bandwidth 617-652 729-746 746-756 758-768 791-821 869-894 859-894 925-960 Uplink 663-698 699-716 777-787 788-798 832-862 824-849 814-849 880-915 1930-1995 1850-1915 2110-2180 1710-1780 2350-2360 2305-2315 2496-2690 2496-2690 3550-3700 3550-3700 35 17 10 10 30 25 35 35 65 70 10 100 100 Access Unit RF Interface QMA Female 8 x 10 GBps SFP+ Interfaces 6 to 8 optical connections to E2-O or RU 2 optical connections to slave AUs Transmission Rate 10.1376 GB/s AU-AC modules 4 x AU-AC modules per chassis (RF interface with BTS) Full 3GPP Band per Module (up to 100 MHz) Band Support 12 x 3GPP bands on 1 fiber core (using 2 x Slave A2) Physical Alarms DB9, Female (4x in, 4x out) Maintenance Interface Ethernet RJ45 / Wi-Fi / USB AU-AC power level (dB) 0dBm to +15 dBm Input Power Range for each port Corning Optical Communications Everon 6200 Specification Sheet | CMA-792-AEN | Page 6 Electrical Electromagnetic Compatibility/Interference

(EMC/EMI) Maximum Power Consumption

(AU/EU-O/RU) 80W 3GPP TS36.113 | 3GPP TS25.113 100-240v AC, 50/60Hz 48VDC 20%

Mean Time Between Failure

(MTBF)

> 80,000 hours Operating Temperature

-10C to +50C / 14F to +122F Storage Temperature

-40C to +70C / -40F to +158F 5% to 85% (Noncondensing) Passive Wall or 19-in Rack Ingress Protection Rating IP30 (Indoor) AC Power DC Power Environmental Humidity Cooling Installation Mechanical AU (Width / Height / Depth /

Weight) 440 mm / 44 mm / 329 mm / 8.0 kg 17.32 in / 1.73 in / 12.95 in / 17.64 lb E62-E2-O Expansion Unit Interfaces Optical Connector Type 16 x 10 GBps SFP+ Interfaces 400 MHz Mode 1 optical connection to A2 or upper E2 1 optical connection to lower E2 14 optical connections to RUs 800 MHz Mode 1 optical connection to A2 or upper E2 1 optical connection to lower E2 6 optical connections to RUs Transmission Rate 10.1376 GB/s Cascading Up to 5 x E2-O per Optical connection Band Support 12 x 3GPP bands on 1-fiber core (using 2 x Slave A2) Corning Optical Communications Everon 6200 Specification Sheet | CMA-792-AEN | Page 7 Maintenance Interface Ethernet RJ45 / Wi-Fi / USB Electrical Electromagnetic Compatibility/Interference

(EMC/EMI) Maximum Power Consumption

(AU/EU-O/RU) 50 W 3GPP TS36.113 | 3GPP TS25.113 100-240 VAC, 50/60 Hz 48 VDC 20%

Mean Time Between Failure

(MTBF)

> 80,000 hours Operating Temperature

-10C to +50C / 14F to +122F Storage Temperature

-40C to +70C / -40F to +158F 5% to 85% (Noncondensing) Passive Wall or 19-in Rack Ingress Protection Rating IP30 (Indoor) AC Power DC Power Environmental Humidity Cooling Installation Mechanical EU-O (Width / Height / Depth /

Weight) 440 mm / 44 mm / 220 mm / 5.0 kg 17.32 in / 1.73 in / 8.66 in / 11.02 lb Corning Optical Communications Everon 6200 Specification Sheet | CMA-792-AEN | Page 8 E62-N2RU Low-Power Remote Unit System Maximum RF Bands per Access Unit 4 Maximum RF Bands per Remote Unit 8 Maximum RF Bands per System 12 Maximum EUs per Master AU Maximum EUs cascaded Maximum RUs cascaded Maximum Access Units per System 3 (1 x Master / 2 x Slaves) 8 5 6 6 1 Frequency Range (Noncontiguous) 3700 MHz 3800 MHz Bandwidth per Channel (Downlink &

Uplink) 100 MHz (Contiguous) Digital Bandwidth per Channel

(Downlink & Uplink) 20 / 30 / 40 / 50 / 60 / 80 / 100 MHz Bandwidth per System (Downlink &

Uplink) 360 MHz + 1 GB/s IP (100 MB/s if > 360 MHz RF Bandwidth) 400 MHz Maximum MIMO 2x2: 1 x RU (x4) | 4x4: 1 x RU (x2) | 8x8: 1 x RU IP Transmission Rate per RU 1 GB/s (100 MB/s if > 360 MHz RF Bandwidth) Maximum IP Connections per EU Maximum IP Connections per RU System Delay Adjustment Up to 80.00 s Forward Path (Downlink) Output Power per Carrier Number of Carriers Frequency higher than 1 GHz Frequency lower than 1 GHz 1 20 17 2 17 14 4 14 11 8 11 8 Output Power Accuracy 2 dB Maximum Gain 20 2 dB for frequency higher than 1 GHz Maximum Input Power 17 3 dB for frequency lower than 1 GHz Error Vector Magnitude

+15 dBm (with AGC operating) / 0 dBm (without AGC operating) Ripple

< 3.5% @ 256 QAM Manual Attenuation Control 4 dB Typical Corning Optical Communications Everon 6200 Specification Sheet | CMA-792-AEN | Page 9 System Delay (AU+EU+RU) 8 s Reverse Path (Uplink) Maximum Output Power per Band 20 dBm Output Power Accuracy 2 dB Maximum Gain 20 2 dB Maximum Input Power

-25 dBm Ripple 4 dB Typical Manual Gain Control 30 dB @ 1 dB/step (AU:20 dB, RU:10 dB) System Delay (1AU+1EU+1RU) 8 s Noise Figure 10 dB Typical @ Maximum Gain Interfaces Antenna Interface (All bands) QMA Female (External Antenna version) Access Unit RF Interface QMA Female Corning Optical Communications Everon 6200 Specification Sheet | CMA-792-AEN | Page 10 Transmission Connector Type SFP+, Standard LC Transmission Rate 10.1376 GB/s Optical Fiber Length 1.4 km / 10 km / 30 km 0.87 mi / 6.21 mi / 18.64 mi Physical Alarms DB9, Female (4x in, 4x out) Maintenance Interface Ethernet RJ45 / Wi-Fi / USB Electrical Electromagnetic Compatibility/Interference

(EMC/EMI) Maximum Power Consumption 98 W DC Power 48 VDC 20%

3GPP TS36.113 | 3GPP TS25.113 Environmental Mean Time Between Failure (MTBF) > 80,000 hours Operating Temperature (RU)

-10C to +40C / 14F to +104F Storage Temperature

-40C to +70C / -40F to +158F 5% to 85% (Noncondensing) Active Ceiling or Wall Ingress Protection Rating IP30 (Indoor) Humidity Cooling Installation Mechanical

(N2RU-I-Cover) (Width / Height /

Depth / Weight) 220 mm / 55 mm / 220 mm / 2.6 kg 8.66 in / 2.16 in / 8.66 in / 5.73 lb

(N2RU-X-Cover) (Width / Height /

Depth / Weight) 220 mm / 65 mm / 220 mm / 3.1 kg 8.66 in / 2.56 in / 8.66 in / 6.83 lb Corning Optical Communications Everon 6200 Specification Sheet | CMA-792-AEN | Page 11 E62-M2RU Medium-Power Remote Unit System 4 4 8 5 6 Maximum RF Bands per Access Unit Maximum RF Channels per Remote Unit Maximum Access Units per System Maximum EUs per Master AU Maximum EUs cascaded Maximum RUs cascaded Frequency Range (Non-

Contiguous) Bandwidth per Channel

(Downlink & Uplink) 3 (1 x Master AU / 2 x Slaves AU) 600 MHz 3700 MHz 100 MHz (Contiguous) Digital Bandwidth per Channel

(Downlink & Uplink) 20 / 30 / 40 / 50 / 60 / 80 / 100 MHz Bandwidth per System (Downlink

& Uplink) 400 MHz (in each direction) System Delay Adjustment Up to 80.00 s @ 1s step, manual & auto, Band based Redundancy Fiber Loopback VSWR 1.5 Forward Path (Downlink) Number of Carriers 1 Output Power per Carrier(dBm) 37 2 34 4 31 8 28 16 25 Maximum Gain 37 2dB Maximum Input Power

+15 dBm (with AGC operating) / 0 dBm (without AGC operating) EVM Ripple

< 3.5% @ 256 QAM 4 dB Typical Manual Attenuation Control 45 dB @ 1dB/step (AU: 30 dB, RU: 15 dB) System Delay (AU+EU+RU) 12 s Corning Optical Communications Everon 6200 Specification Sheet | CMA-792-AEN | Page 12 Reverse Path (Uplink) Maximum Output Power per Band

-13 dBm Maximum Gain 37 2 dB Maximum Input Power

-35 dBm Ripple 4 dB Typical Manual Gain Control 45 dB @ 1 dB/step (AU: 30 dB, RU: 15 dB) System Delay (AU+EU+RU) 8 s Noise Figure 4 dB Typical @ Maximum Gain Band 3GPP Band Downlink Uplink Max Bandwidth Supported Bands 3600 MHz 2500 MHz TDD 1900 MHz 48 41 25 2100 MHz AWS 66E 2110-2200 1710-1780 3550-3700 3550-3700 2496-2690 2496-2690 1930-1995 1850-1915 100 100 65 90 Interfaces Antenna Interface (All bands) 4.3-10 Female Access Unit RF Interface QMA Female Optical Connector Type SFP+, Standard LC Optical Transmission Rate 10.1376 Gb/s Optical Fiber Length 1.4 km / 10 km / 30 km 0.87 mi / 6.21 mi / 18.64 mi Dry Contact AU: 4 Inputs & 4 Outputs, NO and NC Mode RU: 2 Inputs & 2 Outputs, NO and NC Mode Maintenance Interface Ethernet RJ45 Electrical EMC Safety Complies with 3GPP TS36.106 | 3GPP TS25.106 EN 301489-1 / -50, EN 50121-4, EN 55032, EN 61000-4 series EN 60950-1, EN 60950-22, EN 62368-1, EN 50385 Corning Optical Communications Everon 6200 Specification Sheet | CMA-792-AEN | Page 13 Maximum Power Consumption

(AU/EU/RU) 150 W 100-240 VAC, 50/60 Hz 48 VDC 20%

AC Power DC Power Environmental Humidity Cooling Installation Mechanical Mean Time Between Failure

(MTBF)

> 100,000 hours Operating Temperature (RU)

-40C to +55C / -40F to +131F 5% to 100% (Noncondensing) Passive Wall or Pole Ingress Protection Rating IP67 (Outdoor) Complies with EN 300019-1-1, EN 300019-1-2, EN 300019-1-4 RU(M2RU) (Width / Height /

Depth / Weight) 360 mm / 115 mm / 260 mm / 12.0 kg

(14.17 in / 4.53 in / 10.24 in / 26.46 lb) E62-HPRU High-Power Remote Unit System Maximum RF Bands per Access Unit Maximum RF Bands per Remote Unit Maximum RF Bands per System 12 Maximum Access Units per System Maximum EUs per Master AU Maximum EUs cascaded Maximum RUs cascaded Frequency Range

(Noncontiguous) Bandwidth per Channel

(Downlink & Uplink) 3 (1 x Master / 2 x Slaves) 700 MHz 2700 MHz 80 MHz (Contiguous) 4 2 8 5 6 Corning Optical Communications Everon 6200 Specification Sheet | CMA-792-AEN | Page 14 Output Power per Carrier UMTS (dBm) Number of Carriers LTE (dBm) 1 43 43 2 40 40 4 37 37 8 34 34 Digital Bandwidth per Channel

(Downlink & Uplink) 20 / 30 / 40 / 60 / 80 MHz Bandwidth per System (Downlink

& Uplink) 280 MHz (in each direction) MIMO 2x2: 1 x RU | 4x4: 2 x RU | 8x8: 4 x RU IP Transmission Rate per RU 1 GB/s Maximum IP Connections per EU 6 Maximum IP Connections per RU 1 System Delay Adjustment Up to 80.00 s Forward Path (Downlink) Manual Gain Control 45 dB @ 1 dB/step (AU:30 dB, RU:15 dB) Output Power Accuracy 2 dB Maximum Gain 43 3 dB Maximum Input Power

+15 dBm Error Vector Magnitude

<8.0% @ 64 QAM Ripple 3 dB Typical System Delay (AU+EU+RU) 12 s VSWR (AU/RU) 1.5:1 Reverse Path (Uplink) Maximum Output Power per Band

-7 dBm Output Power Accuracy 2 dB Maximum Gain 43 3 dB Maximum Input Power

-35 dBm Ripple 3 dB Typical Manual Gain Control 45 dB @ 1 dB/step (AU:30 dB, RU:15 dB) System Delay (1AU+1EU+1RU) 8 s Corning Optical Communications Everon 6200 Specification Sheet | CMA-792-AEN | Page 15 Noise Figure 4 dB Typical @ Maximum Gain Supported Bands Band 600 MHz 850 MHz Extended 1900 MHz 2100 MHz AWS 2300 MHz 71 26 25 66 30 3GPP Band Downlink Max Bandwidth 617-652 859-894 Uplink 663-698 814-849 1930-1995 1850-1915 2110-2180 1710-1780 2350-2360 2305-2315 35 35 65 70 10 80 80 2500 MHz TDD 41 (Lower) 2496-2576 2496-2576 2500 MHz TDD 41 (Upper) 2610-2690 2610-2690 Interfaces Antenna Interface (All bands) 4.3-10 Female Access Unit RF Interface QMA Female Optical Connector Type SFP+, Standard LC Optical Transmission Rate 9.8304GB/s Optical Fiber Length 1.4 km / 10 km / 30 km 0.87 mi / 6.21 mi / 18.64 mi Physical Alarms DB9, Female (4x in, 4x out) Maintenance Interface Ethernet RJ45 / Wi-Fi / USB Electrical Electromagnetic Compatibility/Interference

(EMC/EMI) Maximum Power Consumption 250 W 3GPP TS36.113 | 3GPP TS25.113 AC Power DC Power Environmental 100-240 VAC, 50/60 Hz 48 VDC 20%

Mean Time Between Failure

(MTBF)

> 100,000 hours Corning Optical Communications Everon 6200 Specification Sheet | CMA-792-AEN | Page 16 Operating Temperature

-40C to +50C / -40F to +122F Storage Temperature

-40C to +70C / -40F to +158F Humidity Cooling Installation 5% to 85% (Noncondensing) Passive RU: Wall or Pole Ingress Protection Rating IP65 (Outdoor) Mechanical RU (Width / Height / Depth /

Weight) excluding Bands 12, 13 & 14 RU (Width / Height / Depth /

Weight) for Bands 12, 13 & 14 Element Management OMT (Operations and Maintenance Terminal) LMS (Local Management System) 400 mm / 125 mm / 300 mm / 16.0 kg 15.75 in / 4.92 in / 11.81 in / 35.27 lb 400 mm / 135 mm / 300 mm / 18.0 kg 15.75 in / 5.31 in / 11.81 in / 39.68 lb Yes. Access via AU, EU or RU (Web Based) Yes (Ordered separately) NMS (Network Management System) Yes (Ordered separately) Corning Optical Communications Everon 6200 Specification Sheet | CMA-792-AEN | Page 17 Ordering guide Access Unit Chassis Part Number Description E62-A2-4-AC Access Unit Chassis, 4 Bands, 360 3800 MHz supported, 100-240 VAC Powered E62-A2-4-DC Access Unit Chassis, 4 Bands, 360 3800 MHz supported, 48v DC Powered E62-AU-4-AC Access Unit Chassis, 4 Bands, 600 2700 MHz supported, AC Powered E62-AU-4-DC Access Unit Chassis, 4 Bands, 600 2700 MHz supported, DC Powered Access Unit Modules E62-AU-AC-M600 Access Unit Module, 4 Way Active Combiner 600 MHz (UL 663-698 / DL 617-652) E62-AU-AC-M700L Access Unit Module, 4 Way Active Combiner 700 MHz Lower (UL 698-716 / DL 728-

746) E62-AU-AC-M700U Access Unit Module, 4 Way Active Combiner 700 MHz Upper (UL 776-787 / DL 746-

757) E62-AU-AC-M700S Access Unit Module, 4 Way Active Combiner 700 MHz Upper (UL 788-798 / DL 758-

768) E62-AU-AC-M700LUPS Access Unit Module, 4 Way Active Combiner 700 MHz Lower & Upper (UL 698-

716|776-798 / DL 728-768) E62-AU-AC-M850E E62-AU-AC-M1900 Access Unit Module, 4 Way Active Combiner 850 MHz Extended (UL 814-849 / DL 859-894) Access Unit Module, 4 Way Active Combiner 1900 MHz ( UL 1850-1915 / DL 1930-

1995) E62-AU-AC-M2100A Access Unit Module, 4 Way Active Combiner 2100 MHz AWS (UL 1710-1780 / DL 2110-2200) E62-AU-AC-M2300 Access Unit Module, 4 Way Active Combiner 2300 MHz (UL 2305-2315 / DL 2350-

2360) E62-AU-AC-M2500T Access Unit Module, 4 Way Active Combiner 2500 MHz TDD (2496-2690) E62-AU-AC-M3600T Access Unit Module, 2 Way Active Combiner 3600 MHz CBRS TDD (3550-3700) E62-AU/RU-NC Blanking Card to suit AU or Indoor Low-Power RU Expansion Units E62-E2-O-14-AC Expansion Unit Supports up to 6 x Optical Outputs. 100-240 VAC Powered. E62-E2-O-14-DC Expansion Unit Supports up to 6 x Optical Outputs. 48 VDC Powered. E62-EU-O-6-AC Expansion Unit, Supports up to 6 x Optical Outputs, AC Powered E62-EU-O-6-DC Expansion Unit, Supports up to 6 x Optical Outputs, DC Powered Remote Unit Modules, Low Power Corning Optical Communications Everon 6200 Specification Sheet | CMA-792-AEN | 27 July 2021 | Page 18 E62-N2RU-I-8-DC Indoor Nano Remote Chassis, 400 MHz, 8 Bands. Includes 1 pair simplex LC SFP+

E62-N2RU-M600 Indoor Nano Radio Module, 17 dBm, 600 MHz (UL 663-698 / DL 617-652) E62-N2RU-M700L Indoor Nano Radio Module, 17 dBm, 700 MHz Lower (UL 699-716 / DL 729-746) E62-N2RU-M700U Indoor Nano Radio Module, 17 dBm, 700 MHz Upper (UL 777-787 / DL 746-756) E62-N2RU-M700S Indoor Nano Radio Module, 17 dBm, 700 MHz Safety (UL 788-798 / DL 758-768) E62-N2RU-M850E Indoor Nano Radio Module, 17 dBm, 850E MHz (UL 814-849 / DL 859-894) E62-N2RU-M1900 Indoor Nano Radio Module, 20 dBm, 1900 MHz (UL 1850-1915 / DL 1930-1995) E62-N2RU-M2100A Indoor Nano Radio Module, 20 dBm, 2100 MHz AWS (UL 1710-1780 / DL 2110-

2200) E62-N2RU-M2300 Indoor Nano Radio Module, 20 dBm, 2300 MHz (UL 2305-2315 / DL 2350-2360) E62-N2RU-M2500T Indoor Nano Radio Module, 20 dBm, 2500 MHz TDD (2496-2690) E62-N2RU-M3600T Indoor Nano Radio Module, 20 dBm, 3600 MHz TDD CBRS (3550-3700) E62-N2RU-D-Shroud Dual N2RU Shroud E62-N2-7F8517192325-E-1 E62-N2, 400 MHz, 700 L & U, FirstNet,800/850, AWS, PCS, WCS, TDD 2500, External Antenna, 10 km BiDi SFP E62-N2-7F8517192325-I-1 E62-N2, 400 MHz, 700 L & U, FirstNet,800/850, AWS, PCS, WCS, TDD 2500, Integrated Antenna, 10 km BiDi SFP E62-N2-7F851719-E-1 E62-N2, 400 MHz, 700 L & U, FirstNet,800/850, AWS, PCS, External Antenna, 10 km BiDi SFP E62-N2-7F851719-I-1 E62-N2, 400 MHz, 700 L & U, FirstNet,800/850, AWS, PCS, Integrated Antenna, 10 km BiDi SFP E62-N2-25252525-I-1 E62-N2, 400 MHz, 4X TDD 2500, Integrated Antenna, 10 km BiDi SFP E62-N2-25252525-E-1 E62-N2, 400 MHz, 4X TDD 2500, External Antenna, 10 km BiDi SFP E62-N2-252525252525-E-1 E62-N2, 400 MHz, 6X TDD 2500, External Antenna, 10 km BiDi SFP E62-N2-252525252525-I-1 E62-N2, 400 MHz, 6X TDD 2500, Integrate Antenna, 10 km BiDi SFP E62-N2-7F8517192525-E-1 E62-N2, 400 MHz, 700 L & U, FirstNet,800/850, AWS, PCS, 2x TDD 2500, External Antenna, 10 km BiDi SFP E62-N2-7F8517192525-I-1 E62-N2, 400 MHz, 700 L & U, FirstNet,800/850, AWS, PCS, 2x TDD 2500, Integrated Antenna, 10 km BiDi SFP Remote Unit Modules, Mid Power E62-M2RU-OD-4-DC Outdoor Mid-Power Remote Unit, Sub6 GHz, Dual Band 2T2R or Single Bands 4T4R, DC Powered E62-M2RU-OD-M1900 Outdoor Mid-Power Remote Unit PA Module, 1900 MHz (UL 1850-1915 / DL 1930-

1995), 2T2R Corning Optical Communications Everon 6200 Specification Sheet | CMA-792-AEN | 27 July 2021 | Page 19 E62-M2RU-OD-M2100A Outdoor Mid-Power Remote Unit PA Module, 2100 MHz AWS (UL 1710-1780 / DL 2110-2200), 2T2R E62-M2RU-OD-M2500T Outdoor Mid-Power Remote Unit PA Module, 2500 MHz TDD (UL/DL 2496-2690), 2T2R E62-M2RU-OD-M3600T Outdoor Mid-Power Remote Unit PA Module, 3600 MHz TDD (UL/DL 3550-3700), 2T2R E62-M2-1717-1919-1 E62-M2, 2x2 (AWS, PCS), 10 km BiDi SFP E62-M2-1717-2525-1 E62-M2, 2x2 (AWS, TDD 2500), 10 km BiDi SFP E62-M2-1919-2525-1 E62-M2, 2x2 (PCS, TDD 2500), 10km BiDi SFP E62-M2-2525-2525-1 E62-M2, 4x4 TDD 2500, 10km BiDi SFP Remote Unit Modules, High Power E62-HPRU-OD-2-AC Outdoor High-Power Remote Unit Chassis, Supports up to 2 Discrete Bands, AC Powered E62-HPRU-OD-2-DC Outdoor High-Power Remote Unit Chassis, Supports up to 2 Discrete Bands, DC Powered E62-H2RU-OD-2-AC Outdoor H2RU Chassis, Supports up to 2 Discrete Bands, AC Powered E62-H2RU-OD-2-DC Outdoor H2RU Chassis, Supports up to 2 Discrete Bands, DC Powered E62-HP-F-OD-2-AC Outdoor High-Power Remote Unit Chassis, Supports one DPD PA module and one FFPA module, AC Powered E62-HP-F-OD-2-DC Outdoor High-Power Remote Unit Chassis, Supports one DPD PA module and one FFPA module, DC Powered E62-HPRU-OD-M600 Outdoor High-Power Remote Unit Module, 600 MHz (UL 663-698 / DL617-652), 10W output power E62-HPRU-OD-M700L Outdoor High-Power Remote Unit Module, 700 MHz Lower (UL 698-716 / DL 728-

746) E62-HPRU-OD-M700U Outdoor High-Power Remote Unit Module, 700 MHz Upper (UL 776-787 / DL 746-

757) E62-HPRU-OD-M700LUPS Outdoor High-Power Remote Unit Module, 700 MHz Upper & Lower (UL 698-

716|776-798 / DL 728-768) E62-HPRU-OD-M850E Outdoor High-Power Remote Unit Module, 850 MHz Extended (UL 814-849 / DL 859-

894) E62-HPRU-OD-M1900 Outdoor High-Power Remote Unit Module, 1900 MHz (UL 1850-1915 / DL 1930-

1995) E62-HPRU-OD-M2100A Outdoor High-Power Remote Unit Module, 2100 MHz (UL 1710-1780 / DL 2110-

2180) E62-HPRU-OD-M2300 Outdoor High-Power Remote Unit Module,2300 MHz (UL 2305-2315 / DL 2350-

2360) Corning Optical Communications Everon 6200 Specification Sheet | CMA-792-AEN | 27 July 2021 | Page 20 E62-H2RU-OD-M2100A Outdoor High-Power Remote Unit Module, 2100 MHz (UL 1710-1780 / DL 2110-

2200) E62-H2RU-OD-M2500TL Outdoor High-Power Remote Unit Module, 2500 MHz TDD Lower (2496-2596) E62- H2RU-OD-M2500TU Outdoor High-Power Remote Unit Module, 2500 MHz TDD Upper (2590-2690) E62-HP-AC-17-19-1 E62-HP, AWS, PCS, 10 km BiDi SFP, AC E62-HP-DC-17-19-1 E62-HP, AWS, PCS, 10 km BiDi SFP, E62-H2-AC-25-25-1 E62-H2, 2500 TDD, 10 km BiDi SFP, AC E62-H2-DC-25-25-1 E62-H2, 2500 TDD, 10 km BiDi SFP, DC This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC License to operate this device. NOTE: Only authorized person can enter the area where the antenna is installed. And the person is fully aware of the potential for exposure and can exercise control over his or her exposure by leaving the area or by some other appropriate means. Awareness of the potential for RF exposure in a workplace or similar environment can be provided through specific training as part of a RF safety program. Any use of unauthorized antennas, cables, and/or coupling devices will lead to not conforming with ERP/EIRP requirement. This device should use original RF accessories, any change of different accessories should consult the manufacture. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-

located or operating in conjunction with any other antenna or transmitter. Corning Optical Communications LLC 4200 Corning Place Charlotte, NC 28216 USA 800-743-2675 FAX: 828-325-5060 International: +1-828-901-5000 www.corning.com/opcomm Corning Optical Communications reserves the right to improve, enhance, and modify the features and specifications of Corning Optical Communications products without prior notification. A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks. All other trademarks are the properties of their respective owners. Corning Optical Communications is ISO 9001 certified. 2021 Corning Optical Communications. All rights reserved. CMA-792-AEN / July 2021 Corning Optical Communications Everon 6200 Specification Sheet | CMA-792-AEN | 27 July 2021 | Page 21

e h t f o 5 1 t r a P h t i w s e i l p m o c e c v e d s h T i i j e h t o t t c e b u s s i n o i t a r e p O l

. s e u R C C F i i e c v e d s h t

) 1

s n o i t i d n o c o w t g n w o i l l o f d n a

, e c n e r e f r e t n i l u f m r a h e s u a c t o n y a m d e r i s e d n u e s u a c y a m t a h t e c n e r e f r e t n i y n a t p e c c a t s u m e c v e d s h t

) 2

i i i i l g n d u c n i

, d e v e c e r e c n e r e f r e t n i

. n o i t a r e p o E62-N2-4-3637-I 1 2 3 4 CBRS CBRS CBRS CBRS 5 6 7 8 C-Band C-Band C-Band C-Band Remote Unit, E62-N2 EVERON 6200 TM FCC ID OJFE62-N2-37 P/N: E62-N2-4-3637-I REL: V2.0 S/N: 362130XXXX REV: A00 Input: 48V 2.1A Made in China 07-2021

Attestation Declaration Letter about Limited Use To whom it may concern, WE (the applicant) Corning Optical Communication LLC Our product Product Description:

Model No:

FCC ID Remote Unit E62-N2 OJFE62-N2-37 Frequency Band:

Downlink 3700MHz to 3800MHz Antenna Port:

4TX *4RX The warning label messages of our products will be also shown in online and point-of-sale marketing materials and on outside packaging of device Statement above. Name (Printed):

Signature:

Jyotin Basrur Title:

Senior Director, Product Line Management On behalf of Company: Corning Optical Communication LLC Telephone: 774 772 0814

SUITE 100 Suwanee, Georgia 30024 United States SG | Spocoeetee es Applicant Declaration

[ Applicant Legal Business Name | Coming Optical Communication LLC -

Address 6 Concord Road, Shrewsbury, MA 01545 Grantee Code | oF _ FOC iD (ONFE62-N2-37 Authorized Contact Name Jyotin Basrur Contact Email basrurj@coring.com Contact Phone 774 772.0814

|, the undersigned, certify that | am an authorized signatory for the Applicant and therefore declare;

2) in accordance with 47CFR2.911(), all ofthe statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belie.

) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

(1) labeling the equipment with the exact FCC ID as specified inthis application,

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules,

) ifthe Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units ofthis equipment will continue to comply with the FCC's technical requirements.

) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilties as specified under 47 CFR 2.909 and KDB394321,

) in accordance with 18017065, FCC KDB641 163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1) the Applicant understands, accepts and agrees that a sample may be requested for surveilance testing.

(2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or !SED.

@) the Applicant shall, upon request by SGS, at the Applicant's expense, provide a production sample of the requested product to SGS, FCC andlor ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or Software required for evaluation, review, cerlification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 4TCFR 1.2002(b) for the definition ofa party for these purposes. 9) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: hitos sAwn fcc. goviwireless/bureau-divisions/technoloaies-systems-and-innovation-division/rules-requlations-title-47 Link to KDBs:htiosJ/apps fec.aovloetcffkab/index.cfm Link to RSP-100: hitos:/ivwwic.ac.caleic/site/smi-gst nsV/ena/sf01130 hm!

Ve we | 6l1[2022 |

| Jyotin Basrur

& _| Senior Director, Product Line Management =

NOTE: This declaration cannot be signed by an Agent, t shal be signed by an authorized person lisled in the FOC dat Applicant Declaration Rev.0.0

6 Concord Road, Shrewsbury, MA 01545 Confidentiality Request regarding application for FCC ID: OJFE62-N2-37 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Corning Optical Communication LLC To:

From: Corning Optical Communication LLC Regarding:

LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Tune-up BOM The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature:

Printed Name (on file with the FCC associated with the Grantee Code): Jyotin Basrur Title: Senior Director, Product Line Management Company Name: Corning Optical Communication LLC Corning Restricted

Corning Optical Communication LLC Date: 2022-06-28 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID:OJFE62-N2-37 To whom it may concern:

We, the undersigned, hereby authorize Compliance Certification Services (Kunshan) Inc and Winkey Wang in Compliance Certification Services (Kunshan) Inc to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own.. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Corning Optical Communication LLC This authorization is valid until further written notice from the applicant. Print Name: Jyotin Basrur Signature:

On behalf of Company: Corning Optical Communication LLC Telephone: 817-431-7894 E-mail: basrurj@corning.com Title: Senior Director, Product Line Management