FCC ID: 2BCPKENGYPRO24 Smart Phone

06:18 SAT SEP 2 ENGY Pro 24 auick Guide ENGY Pro 24 Guia De Usuario English 1. For more information Consult the quick guide in packing box. Open cellphone service and enjoy following service Consult the manual Get help through various channel such as self-service, intelligent questioning and answering, manual service, question feedback. In addition, you can search stores, service network, and service policy.

(Open setting>About cellphone> Law information, consult law information. 2. Cellphone appearance flume Key Fingerprin Power Button 3, Card insertion guidance Tips:

ay attention to notch direction in inserting card and keep the card support horizontal Please use the standard Nano-SIM card, Insertion of unqualified card may damage the SIM card support. 4, Double card settings 1, Start up the cellphone through a long touch of power button. 2. Follow screen tips and enter Home Screen, SS Ss 5.Safety information Incompatible or unauthorized power supply, charger, and battery may cause fire, explosion, or other hazards. Only the accessories accepted by the manufacturers and matched with the type can be used. Only types of accessories may cause accident and violate the warranty and related national regulations. Please contact with authorized service center for recognized accessories. Please do not use high volume for long time to protect hearing, Please use the device at the temperature from -20C-70C. Too high or too low temperature may cause device failure. Do not expose the device or battery to high temperature place or heat-releasing equipment, such as sunshine, heater, microwave oven, water heater, etc. Battery overheating may cause explosion, When charging the device, power socket should be equipped at places near device accessory. Please disconnect the charger with the device, and unplug it when it charged well or uncharged. If the device is equipped with non-removable internal battery, do not replace the battery in case of battery or device damage. The battery can be only replaced by authorized service centers. This device, battery and other accessories should be disposed in accordance with local regulations instead of treating them as domestic garbage. Improper battery treatment may cause battery explosion. 6.Privacy protection Upgrading firmware and system with unauthorized third-party software may cause cellphone failure or person information leakage. Online upgrading and downloading of matched official software are recommended, Please backup you personal information before upgrading as your person information may be removed. 7 Safety standards Content of harmful substance in this homogeneous material is below the limit of GB/126572 standard The harmful substance content of this homogeneous material at least exceed the limit of GB/T26572 standard. However, there is no better alternative at resent. Thus, it meets the environmental protection requirement of EU ROHS. The number of this logo indicated that its normal EPUP is 20 years. Some accessories may also have the EPUP logo and the number in the logo prevails. This product may not include all the accessories due to different types, and it should be subject to the actual configuration. 2G: 850/300/1800/1900 36: 82/85 4G: FDD: B2/84/B5/87/812/B17/828ab Name and content of harmful substance Spare harmful substance part p> | He Cd criv) | PBB | PBED Device ae Charger [x |

Earphone |x |

Battery x |

Cable FCC Warning:

Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help SAR tests are conducted using standard operation positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value, in general, the closer you are to a wireless base station antenna, the lower the power output, Before a new model phone is available for sale to public, it must be tested and certified to the FCC that does not exceed the exposure limit established by the FCC, Tests for each phone are performed in positions and locations(e.g. at the ear and worn on the body) as required by the FCC. For body worn operation, this model phone has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when sued with an accessory that contains no metal and that positions the handset a minimum of 1.0 em from the body, Non-compliance with the above restrictions may result in violations of RF exposure guidelines. Google, Android, Google Play, Gmail and other marks are trademarks of Google LLC 1. Para mas informacin Consultar la guia rapida que se encuentra dentro dea caja, Enciende el telfono celular y disfrute los siguientes servicios :

Consultar el manual. Obtenga ayuda a travs de varios canales, tales como autoservicio, preguntas y respuestas inteligentes, manual de servicio, preguntas y comentarios. Ademas, puede buscar tiendas, red y politica de servicio. Abrir configuracin> Acerca de! telfono celular> Informacin legal, consulte informacin legal. 2. Apariencia del celular. MANOS LIBRES TECLA DE VOLUMEN BOTON DE ENCENDIDO +

ALTAVOZ TYPE-C 3. Gula de insercin dela tarjeta, Consejos:

Preste atencin a la direccin de la muesca al insertar la tarjeta y mantenga el soporte de la tarjeta en posicin horizontal Utilice la tarjeta Nano-SIM estindar. La insercin de una tarjeta no calificada puede dafiar el soporte dela tarjeta SIM. 4. Configuracin de Dual SIM. 1. Encienda el telfono celular con un largo toque de botn de encendido. 2. Siga los consejos de la pantalla y entre en la pantalla de inicio. al an 5. Informacion de seguridad La fuente de alimentacin, el cargador y la bateria incompatibles 0 no autorizados pueden provocarincendios, explosiones u otros peligros. Solo se pueden utilizar los accesorios aceptados por los fabricantes. El no uso de estos accesorios puede causar accidentes y violar la garantia y las regulaciones nacionales relacionadas. Por favor, pngase en contacto con un centro de servicio autorizado para accesorios reconocidos. No utilice un volumen alto durante mucho tiempo para proteger la audicin Utilice el dispositive a la temperatura de -20C -70'C. Una temperatura demasiado alta o demasiado baja puede causar la alla del dispositivo. No exponga el dispositive o la bateria @ lugares de alta temperatura 0 equipos que liberen calor, como la luz solar, el calentador, el horno microondas, el calentador de agua, etc. El sobrecalentamiento de la bateria puede causar una explosin Al cargar el dispositivo, la toma de corriente debe estar ubicada en lugares cercanos al accesorio del dispositive. No deje el cargador conectado al equipo, si ste ya ha cargado completamente Cuando termine el proceso de carga, desconecte el cargador junto, con el equipo. Si el dispositivo estd equipado con una bateria interna no extraible, no reemplace la bateria en caso de que la bateria o el dispositivo sufran dafios. La bateria solo puede ser reemplazada por un centro de servicio autorizado Este dispositivo, la bateria y otros accesorios deben eliminarse de acuerdo con las regulaciones locales, en lugar de tratarlos como basura domstica. El tratamiento inadecuado de la bateria puede causar la explosin de la bateria. 6. Proteccin de la privacidad. La actualizacion del firmware y el sistema con un software de terceros no autorizado puede causar una falla del telfono celular o una fuga de informacin personal Se recomienda la actualizacion y descarga en linea del software oficial compatible. Haga una copia de seguridad de su informacin personal antes de actualizarla, va que su informacin personal puede ser eliminada:

7..Normas de seguridad El contenido de sustancias nocivas en este material homogneo est por debajo del limite de la norma GB / 26572. El contenido de sustancias nocivas de este material homogneo supera al menos el limite del estandar GB / 726572. Sin embargo, no hay mejor alternativa al reenviar. Por lo tanto, cumple con el requisito de proteccin ambiental de la UE RoHS. EI numero de este logotipo indica que su EPUP normal es de 20 afos. Algunos accesorios tambin pueden tener el logotipo de EPUP y el ntimero del logotipo prevalece. Es posible que este producto no incluya todos los accesorios debido a diferentes tipos, y debe estar sujeto a la configuracin real 2G: 850/900/1800/1900 3G: 82/85 4G: FDD: B2/84/85/87/812/B17/828ab Name and content of harmful substance Spare harmful substance part Pb Hg cd cri) | P88 | PBED Device x |

Charger |x Earphone |

Battery x 1 Cable |

ADVERTENCIA:

Cualquier cambio 0 modificacin no aprobada expresamente por la parte responsable del cumplimiento de la siguiente guia podria anular la autoridad de!

usuario para operar el equipo. Este dispositive cumple con la parte 15 de las normas de la FCC, Elfuncionamiento est sujeto a las siguientes dos condiciones

(1) Este dispositive no puede causar interferencias perjudiciales y

(2) Este dispositivo debe aceptar cualquier interferencia recibida, incluidas las Interferencias que puedan causar un funcionamiento no deseado. Nota: Este equipo ha sido probado y se ha encontrado que cumple con los limites para un dispositivo digital de Clase B, de conformidad con la parte 15 de las Normas de la FCC. Estos limites estan disefiados para proporcionar una proteccin razonable contra interferencias perjudiciales en una instalacin residencial. Este equipo genera, utiliza y puede emitir energia de radiofrecuencia y, si no se instala y utiliza de acuerdo con las instrucciones, puede causar interferencias perjudiciales en las comunicaciones de radio. Sin embargo, no hay garantia de que no se produzcan interferencias en una instalacin en particular. Si este equipo causa interferencias perjudiciales en la recepcin de radio o televisin, lo cual puede determinarse encendiendo y apagando el equipo, se recomienda al usuario que intente corregir la interferencia mediante una o mas de las siguientes medidas:

-Reoriente o reubique le antena receptora

-Aumente la separacin entre el equipo y el receptor.

-Conecte el equipo a una toma de corriente en un circuito diferente al que esta conectado el receptor

-Consulte al distribuidor o a un tcnico de radio / TV experimentado para obtener ayuda, Las pruebas de SAR se realizan usando posiciones de operacin estdndar aceptadas por la FCC con el telfono transmitiendo a su nivel de potencia certificado mas alto en todas las bandas de frecuencia aprobadas, aunque el nivel de SAR del telfono mientras est en funcionamiento puede estar muy por debajo del valor maximo, en general, cuanto mas cerca ests a una antena de estacin base inalambrica, menor es lapotencia de salida Antes de que un nuevo modelo de telfono est disponible para la venta al publico, debe probarse y certificarse ante la FCC que no excede los limites de exposicin establecidos por la FCC. Las pruebas para cada telfono se realizan en posiciones y ubicaciones (por ejemplo, en el ofdo y en el cuerpo durante el uso) segiin lo requerido por la FCC. Para el uso cerca al cuerpo, este modelo de telfono ha sido probado y cumple con las pautas de exposicin a RF de la FCC cuando se usa con un accesorio designado para este producto 0 cuando se usa con un accesorio que no contiene metal y que coloca el auricular a una distancia minima de 1.0m del cuerpo. El incumplimiento de las restricciones anteriores puede resultar en la violacin de las pautas de exposicin a RF. Google, Android, Google Play, Gmail y otras marcas son marcas de Google LLC.

B0 70 GO 50 40 30 20 Fiinbaatuuhiahintia 100.90 80 70 60 50 40 30 20 10 mn

! i il it t

=I11G WY ENGYPro 24 A FCC ID: 2BCPKENGYPRO24 SN: 65403A0123080000001 IMEI 1:350703140000014 IMEI 2:350703140000022 MADE IN CHINA/ HECHO EN CHINA

<= 30.00 mm >

<= 30.00 mm

2023-09-20 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint Shenzhen Huatongwei International Inspection Co., Ltd./ 1/F, Bldg 3, Hongfa Hi-tech Industrial Park, Genyu Road, Tianliao, Gongming, Shenzhen, China / Hans Hu,. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Corporacion Favorita C.A. / Ave. General Enriquez s/n y Via Cotogchoa, Quito, Ecuador Agency agreement expiration date:

2024-09-20 By:

Stephanie Wright Signature Printed On behalf of :

Corporacion Favorita C.A. Telephone:

+593 983513765

2023-09-20 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BCPKENGYPRO24 Product Name: Smart Phone Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

Schematics Block diagram Operation description Tune up Procedure BOM These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. By:

Stephanie Wright Signature Printed On behalf of :

Corporacion Favorita C.A. Telephone:

+593 983513765

Corporacion Favorita C.A. Covered Equipment Certification Attestation Letter 9/20/2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2BCPKENGYPRO24

(Corporacion Favorita C.A. ) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not covered equipment.

(Corporacion Favorita C.A.) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Signed:

Stephanie Wright Printed name:

Title: manger Company Name: Corporacion Favorita C.A. Date: 9/20/2023

Corporacion Favorita C.A. U.S. Agent Designation for Service of Process -

Certification Attestation Letter September 20, 2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2BCPKENGYPRO24 FRN: 0034184796 Per section 2.911(d)(7) of the FCC rules, ( Corporacion Favorita C.A.) certifies that the equipment for which authorization is sought is designated to the following U.S. Designated agent* for service of process:

Company Name:

Physical U.S. Company Address:

Agent name:

Agent Email Address:

FRN:

WRT WORLD ENTERPRISES 11300 NW 131 Street, Miami, FL, 33178, United States Zlaty Pasternak zpasternak@wrtworld.com 0034261891 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed:

Designated Agent Signed:

(Required, if different to Applicant):

Signed:

Signed:

Printed name:

Title:

Company Name:

Stephanie Wright manger Corporacion Favorita C.A. Printed name:

Title:

Company Name:

Zlaty Pasternak Operation Analyst WRT WORLD ENTERPRISES Date:

September 20, 2023 Date:

September 20, 2023

* the applicant must designate a contact located in the United States for purposes of acting as the applicants agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process.