FCC ID: 2AAFMRDA0023 Wireless USB dongle

2402.25-2478.25 MHZ FREQUENCY BANDS:

Maximan output power:

2402.25-2478.25 MHZ For Dongle:-0.73dBm For Headset:0.41 dBm Remark The label is under the earcap This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. If this equipment does cause harmful interference to radio or television reception,

. WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. 17 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :(1)Lappareil ne doit pas produire de brouillage; (2)Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with FCC/ IC RSS 102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet quipement est conforme aux limites d'exposition aux radiations FCC/IC CNR 102 tablies pour un environnement non contrl. Cet metteur ne doit pas tre situ au mme endroit ou fonctionner avec une autre antenne ou un autre metteur. 18

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 3 Internal Photos for SZEM1906015307CR FCC ID: 2AAFMRDA0023 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 3 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 3

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 4 External Photos for SZEM1906015307CR FCC ID: 2AAFMRDA0023 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 4 EUT Constructional Details 1 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 4

FCC ID and IC Label Location NA :

32.3mm Model:RDA0023 P/N:CA-9011188 CAN ICES-003(B) / NMB-003(B) IC:10954A-RDA0023 FCC ID:2AAFMRDA0023 Made in China 8.8mm S/N: 0001xxxxxxxx XXXXX-XX-XXXXX

Corsair Memory, Inc. 47100 Bayside Pkwy, Fremont, CA 94538, USA Agent Authorization Company: Corsair Memory, Inc. Address: 47100 Bayside Pkwy, Fremont, CA 94538, USA Product Name: Wireless USB dongle Model Number(s): RDA0023 Product Description: Wireless USB dongle We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: Apr. 27, 2021 Name:

Rick Ho Title:

Senior Project Manager, Regulatory Compliance Company: Corsair Memory, Inc.

Corsair Memory, Inc. 47100 Bayside Pkwy, Fremont, CA 94538, USA Apr. 27, 2021 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 SUBJECT:Class II Permissive Charge for FCC ID: 2AAFMRDA0023 The product,: Wireless USB dongle, has been granted by FCC dated 07/26/2019, FCC ID: 2AAFMRDA0023.Now we, Corsair Memory, Inc., would like to modify the authorized equipment for below changes:

There are no changes on the integrated RF part (BT Module). Change the Product Designation. Change the Number of channels and change the frequency through software

. Change the Power supply. Change the Hardware Version and Software Version . Change Antenna. Add a Brand Name. We would like to certify the additional of certified FCC ID: 2AAFMRDA0023 as a Class II Permissive Change in this device. Thank you for your attention in this matter. Signatory Corsair Memory, Inc. Contact person: Rick Ho Title: Senior Project Manager, Regulatory Compliance

Corsair Memory, Inc. 47100 Bayside Pkwy, Fremont, CA 94538, USA Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AAFMRDA0023 Date: Apr. 27, 2021 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Rick Ho Title: Senior Project Manager, Regulatory Compliance

Corsair Memory, Inc. To:

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Regarding:

Confidentiality Request regarding application for FCC ID:2AAFMRDA0023 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Print Name: Rick Ho Signature:

On behalf of Company: Corsair Memory, Inc. Telephone: 88627655045 E-mail: rick.ho@corsair.com Title: Senior Project Manager, Regulatory Compliance

Corsair Memory, Inc. TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding:FCC ID:2AAFMRDA0023 To whom it may concern:

Date: Jul-02-2019 We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Joyce Shi in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Corsair Memory, Inc. This authorization is valid until further written notice from the applicant. Title: Senior Project Manager, Regulatory Compliance Print Name: Rick Ho Signature:

On behalf of Company: Corsair Memory, Inc. Telephone: 88627655045 E-mail: rick.ho@corsair.com