FABRIC WIRELESS SPEAKER 362647-01 COTTON-ON RN 19164 MADE IN CHINA cottonon.com Specifications Blustooth Version Bluetooth V4.1+EDR Frequency 2.4~2.48GHz Working Range s10m Protacol HSP/HFP, A2DP, AVRCP PBAP profiles Battery Capacity 3.7V 2000MAH Audio Speaker 40 5wW Freq, Response 150Hz - 1SKHz Impendence 4R Microphone MIG Built in Power Battery Typa Built in rechargeable Cherging Voltage Li-ion battery DC5V o1 Functions a 2. 3 a Wireless music, compatible with Bluetooth. Aux-in music playing TF card music playing Wireless hands-free talking Charging your Device 1 2. 4.
Using the MICRO USB cable provided and placs into the back of the device On the first usa, please ensure to charge your device for 12 hours, to ensure the battery has fully been activated. When the device is charging a solid RED LED light will appear Ones the device is fully charged a solid GREEN LED light will appear on the back of the device, When the battery is getting Low, a warning sound will appear. This is when voltage is lower than 3.3V. Once this occurs please charge your device. Charging current: DCSV/AA standard Charging time: Up to 4 hours 02 Instructions 1 Wireless function:
To set up your wireless hold down until Blue LED light appears on the back of the device, the speaker will sound with a prompt tone alerting you. To activate your device's wireless setting. Scan for new wireless devices, To pair your device with the speaker select Home speaker and your device will connect. If you are asked for pairing code, please enter 0000, After successful pairing, your speaker will sound @ prompt tone and the LED light will appear solid blue. Note: Pairing time is varied with different devices. Once you have paired your device the first time, it will automatically pair each time for you when you use it. This speaker can remember the last 8 paired devices. The pairing should finish within 10 minutes, beyond this time, the speaker will power off automatically. After pairing is successful, you can play music on your device, Hands-free Function: If you have paired this device to your music devica you can fallow the below for hands free function. 03 1 Call Function:
When there is incoming call the speaker will play your ringtone through the speaker, short press s and you can answer the call and talk to the speaker directly, Short press = again to end the call: Long press & to reject any incoming calls. Redial call function: If you connect with your phone, double short press s to dial back the last dialad call. Wireless automatic connection functions: After the wireless speaker has paired successfully, you can walk up to 10 meters sway from the speaker with your music device before music will stops playing, you will have 10 minutes to come back to the device before the speaker automatically turns its self off. External audio plug-in Function: To play music through this speaker without using the wireless function, connect the 3.5mm AUX lina cable to both the device and to the speaker. Once the AUX mode is connected a SOLID BLUE light will turn on the back of the device and you ara ready to play your music. 4, L 2. 3 a Button functions:
To turn the device on/off, long press @
Te play/pause whilst playing music, short press @
To answer/end calls whilst in use, short press To reject/redial the call whist in use, long press =
To increase tha valume short press + or short prass - to reduce the volume. To skip song, long press + to skip forward or long press -
to skip backwards. (AUX mode cant selact songs) To switch between Wireless/ TF card/ AUX-IN mode short press M Saving power: When not in use, please ensure to turn the speaker off to save battery life. Low battery warning: When the battery has 10% power left a prompt tone will let you know that the device needs charging. If the battery is lower than 3%, the device will automatically turn off. 05, FCC Statement This device complies with Part 15 athe FCC rules. Operation is subject to the fallowing two conditions: 1) this device may not cause harmful interference, and 2) his device must accept any interference received, including interference that may cause undesired operation ote: This equipment has been tested and found to comply with the limits for a Class digital device, pursuant to patt 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accardance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in particular installation. Ifthis equipment does cause harmful interference ta radio or television reception, which can be determined by tuming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experianced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority ta operate the equipment. FCC Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uneantralled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter:
06.