FCC ID: UXX-S5A036A Enterprise Branch Router

E110 Quick Start Guide Introduction This document provides a brief overview of the E110 router, discusses what's inside the box, and provides basic setup and installation instructions. Navigation Use the links below to navigate through this document. Introduction ...................................................................................................................................... 1 Before You Begin .............................................................................................................................. 2 Location Considerations .............................................................................................................................2 SIM Card for Wireless Connectivity .............................................................................................................2 Batteries ....................................................................................................................................................2 Required Tools for Setup ............................................................................................................................3 Setup ................................................................................................................................................ 3 STEP 1: Check box for content. ..................................................................................................................3 STEP 2: Remove the battery door. .............................................................................................................3 STEP 3: Insert an active 2FF-sized SIM. .......................................................................................................3 STEP 4: Insert the battery. .........................................................................................................................4 STEP 5: Reinstall the battery door. .............................................................................................................4 STEP 6: Attach the LTE cellular antennas. ...................................................................................................4 STEP 7: Mount the router. .........................................................................................................................4 DESK ................................................................................................................................................................................... 4 WALL & CEILING ................................................................................................................................................................. 4 STEP 8: Connect the Ethernet cable. ..........................................................................................................4 STEP 9: Power up the router. .....................................................................................................................4 1111 W Jefferson St, Boise, ID 83702 Toll Free: 855.813.3385 Local: 208.424.5054 Fax: 208.429.6852 cradlepoint.com Understanding LEDs .......................................................................................................................... 5 Troubleshooting ................................................................................................................................ 6 Resources ......................................................................................................................................... 7 Help and Support .............................................................................................................................. 7 E110 Router Models .......................................................................................................................... 7 Terms of Service ................................................................................................................................ 7 Before You Begin Read the following before setting up the Cradlepoint E110 router. Location Considerations To ensure the E110 operates efficiently, the following is recommended:

Ensure the device is positioned to receive optimal signal. Avoid positioning near concrete walls, metal or reflective surfaces, or any other objects that may interfere with RF reception. Ensure plenty of ventilation. Avoid installing the device in enclosed spaces. Do not install the device in direct exposure to the elements. Extreme heat or cold can and will impact the router's performance. Refer to the E110 Safety, Regulatory, and Warranty Guide (included with your hardware) for more information about location considerations. SIM Card for Wireless Connectivity A wireless broadband data plan must be added to your Cradlepoint E300 series branch router for wireless broadband connectivity. Wireless broadband data plans are available from network operators such as Verizon, AT&T, Telstra, etc. The SIM card must be activated and provisioned by the network operator. Contact your network operator for details about selecting a data plan and about the process for provisioning your SIM. Batteries The E110 includes two battery doors and the potential to install two batteries. The battery in the side with the SIM slots is considered the primary. This guide provides instructions for installing the primary battery. Installing a battery is optional and not required for use. The E110 router will still operate without an installed battery. Required Tools for Setup

#0 Philips-head screwdriver (for battery door cover)

#2 Philips-head screwdriver (for the mounting screws) Mounting equipment (varies upon desired mounting location) o Drill with 2.5 mm (or equivalent) drill bit Setup The following instructions walk through basic setup of the Cradlepoint E110 router. For more advanced setups, contact a professional installer. STEP 1: Check box for content. Refer to the following to ensure you received all items included with the E110 hardware.

[1] Cradlepoint E110 router

[1] Power supply

[2] LTE antennas

[2] Battery door screws

[2] Wall/ceiling mount screws

[4] Rubber desk mount feet

[1] Mounting template

[1] Getting Started reference sheet

[1] Safety, Regulatory, and Warranty guide

[1] Battery Optional second Battery STEP 2: Remove the battery door. Unscrew and remove the battery door from the E110 endpoint. STEP 3: Insert an active 2FF-sized SIM. Insert an activated 2FF-sized SIM card into the SIM1 slot (contacts down, notch in). The SIM card will click into place. STEP 4: Insert the battery. Insert the battery with the contacts in, logo facing up, until it clicks into place and is fully encased in the router. If you have selected the optional second battery, repeat this process for the second battery. STEP 5: Reinstall the battery door. Replace the battery door and use the door screw to secure. STEP 6: Attach the LTE cellular antennas. Install the 2 paddle antennas on the MAIN and DIV ports. STEP 7: Mount the router. The E110 router may be mounted in a number of ways, including placed on a desk, affixed to a wall, or mounted on the ceiling. Refer to the following for best practices:

Install the rubber feet (included) on the bottom of the router. Place the router on a flat surface away from objects that cause RF interference, including concrete, reflective and metal surface, microwaves, and so on. DESK WALL & CEILING pen or marker. Using the included mounting insert, mark the desired mounting location on the ceiling or wall using a Ensure the mounting location is away from objects that cause RF interference, including concrete, reflective and metal surface, microwaves, and so on. Pre-drill holes for the mounting screws. Use wall anchors to ensure the endpoint is securely mounted. STEP 8: Connect the Ethernet cable. Connect the Ethernet cable to the port marked WAN on the back of the E110. Connect the other end to your cable modem. STEP 9: Power up the router. Connect the power supply to the router and then plug the other end into an electrical outlet. Switch the device to the ON position (O = Off, = On). Allow 1 minute for the router to run through its bootup sequence. Refer to the Understanding LEDs section of this guide for more information about LED indicator status. Understanding LEDs The E110 router uses LED lights on the front panel to communicate various status conditions. Use the table below to verify the status of your router after the 1-minute bootup cycle. NOTE: The icons are only visible when powered on and backlit. STATUS INDICATOR BEHAVIOR POWER: The Cradlepoint E100 must be powered using an approved 54 VDC power source. No Light = Not receiving power. Check the power switch and the power source connection. White = Powered on. Yellow = Battery at less than 20%. Blinking Yellow = Battery needs replacement. SIGNAL STRENGTH: LED bars indicate the active modems signal strength. 4 Solid Bars = Strongest signal. 1 Blinking Bar = Weakest signal (A blinking bar indicates half of a bar). 4 Blinking Bars = SIM door is not installed, modem is off. ETHERNET WAN: Indicates the status of the Ethernet WAN connection No Light = Not connected to an active Ethernet WAN interface. White = Connected to an active Ethernet WAN interface. Yellow = No Ethernet WAN connection. ETHERNET LAN: Indicates the status of the Ethernet LAN connection No Light = No Ethernet LAN ports are connected to an active Ethernet LAN interface. White = Any Ethernet LAN port is connected to an active Ethernet LAN interface. EMBEDDED MODEM: Indicates connection status for the embedded (internal) modem No Light = Modem not connected. Solid White = Modem has established an active connection. Blinking White = Modem is connecting. Solid Yellow = Modem is in the process of resetting. Blinking Yellow = Data connection error. No modem connection possible. INTERNET: Indicates the Internet connection status No Light = No active Internet connectivity. White = Active Internet connectivity via WAN. Yellow = Active Internet connectivity via WAN. WI-FI: Indicates the Wi-Fi status No Light = Wi-Fi is not operating. White = Wi-Fi is on and operating normally (2.4 GHz and/or 5 GHz) OTHER ADDITIONAL LED INDICATIONS ETHERNET PORT LIGHTS: LEDs on either side of each Ethernet port on the backside of the device indicating connection status. Green = 1Gbps Link/Activity Yellow = 10/100 Link/Activity Troubleshooting If the device takes longer than 5 minutes to connect to the Internet, log into the local UI of the device to make configuration changes or to start the troubleshooting process. You must be physically co-located with the device in order to do this. Refer to No Internet or Connection Issues for additional help. Resources E110 Data Sheet Help and Support Cradlepoint Customer Connect Community Cradlepoint Support Services E110 Router Models This document applies to the following E110 models:

CRADLEPOINT E110 MODEL: #######

Terms of Service Cradlepoint Terms of Service & License Agreement Privacy Policy

E100 Quick Start Guide Introduction This document provides a brief overview of the E100 router, discusses what's inside the box, and provides basic setup and installation instructions. Navigation Use the links below to navigate through this document. Introduction ...................................................................................................................................... 1 Before You Begin .............................................................................................................................. 2 Location Considerations .............................................................................................................................2 SIM Card for Wireless Connectivity .............................................................................................................2 Batteries ....................................................................................................................................................2 Required Tools for Setup ............................................................................................................................3 Setup ................................................................................................................................................ 3 STEP 1: Check box for content. ..................................................................................................................3 STEP 2: Remove the battery door. .............................................................................................................3 STEP 3: Insert an active 2FF-sized SIM. .......................................................................................................3 STEP 4: Insert the battery. .........................................................................................................................4 STEP 5: Reinstall the battery door. .............................................................................................................4 STEP 6: Attach the LTE cellular antennas. ...................................................................................................4 STEP 7: Mount the router. .........................................................................................................................4 DESK ................................................................................................................................................................................... 4 WALL & CEILING ................................................................................................................................................................. 4 STEP 8: Connect the Ethernet cable. ..........................................................................................................4 STEP 9: Power up the router. .....................................................................................................................4 1111 W Jefferson St, Boise, ID 83702 Toll Free: 855.813.3385 Local: 208.424.5054 Fax: 208.429.6852 cradlepoint.com Understanding LEDs .......................................................................................................................... 5 Troubleshooting ................................................................................................................................ 6 Resources ......................................................................................................................................... 6 Help and Support .............................................................................................................................. 6 E100 Router Models .......................................................................................................................... 6 Terms of Service ................................................................................................................................ 7 Before You Begin Read the following before setting up the Cradlepoint E100 router. Location Considerations To ensure the E100 operates efficiently, the following is recommended:

Ensure the device is positioned to receive optimal signal. Avoid positioning near concrete walls, metal or reflective surfaces, or any other objects that may interfere with RF reception. Ensure plenty of ventilation. Avoid installing the device in enclosed spaces. Do not install the device in direct exposure to the elements. Extreme heat or cold can and will impact the router's performance. Refer to the E100 Safety, Regulatory, and Warranty Guide (included with your hardware) for more information about location considerations. SIM Card for Wireless Connectivity A wireless broadband data plan must be added to your Cradlepoint E300 series branch router for wireless broadband connectivity. Wireless broadband data plans are available from network operators such as Verizon, AT&T, Telstra, etc. The SIM card must be activated and provisioned by the network operator. Contact your network operator for details about selecting a data plan and about the process for provisioning your SIM. Batteries The E100 includes two battery doors and the potential to install two batteries. The battery in the side with the SIM slots is considered the primary. This guide provides instructions for installing the primary battery. Installing a battery is optional and not required for use. The E100 router will still operate without an installed battery. Required Tools for Setup

#0 Philips-head screwdriver (for battery door cover)

#2 Philips-head screwdriver (for the mounting screws) Mounting equipment (varies upon desired mounting location) o Drill with 2.5 mm (or equivalent) drill bit Setup The following instructions walk through basic setup of the Cradlepoint E100 router. For more advanced setups, contact a professional installer. STEP 1: Check box for content. Refer to the following to ensure you received all items included with the E100 hardware.

[1] Cradlepoint E100 router

[1] Power supply

[2] LTE antennas

[2] Battery door screws

[2] Wall/ceiling mount screws

[4] Rubber desk mount feet

[1] Mounting template

[1] Getting Started reference sheet

[1] Safety, Regulatory, and Warranty guide

[1] Battery Optional second Battery STEP 2: Remove the battery door. Unscrew and remove the battery door from the E100 endpoint. STEP 3: Insert an active 2FF-sized SIM. Insert an activated 2FF-sized SIM card into the SIM1 slot (contacts down, notch in). The SIM card will click into place. STEP 4: Insert the battery. Insert the battery with the contacts in, logo facing up, until it clicks into place and is fully encased in the router. If you have selected the optional second battery, repeat this process for the second battery. STEP 5: Reinstall the battery door. Replace the battery door and use the door screw to secure. STEP 6: Attach the LTE cellular antennas. Install the 2 paddle antennas on the MAIN and DIV ports. STEP 7: Mount the router. The E100 router may be mounted in a number of ways, including placed on a desk, affixed to a wall, or mounted on the ceiling. Refer to the following for best practices:

Install the rubber feet (included) on the bottom of the router. Place the router on a flat surface away from objects that cause RF interference, including concrete, reflective and metal surface, microwaves, and so on. DESK WALL & CEILING pen or marker. Using the included mounting insert, mark the desired mounting location on the ceiling or wall using a Ensure the mounting location is away from objects that cause RF interference, including concrete, reflective and metal surface, microwaves, and so on. Pre-drill holes for the mounting screws. Use wall anchors to ensure the endpoint is securely mounted. STEP 8: Connect the Ethernet cable. Connect the Ethernet cable to the port marked WAN on the back of the E100. Connect the other end to your cable modem. STEP 9: Power up the router. Connect the power supply to the router and then plug the other end into an electrical outlet. Switch the device to the ON position (O = Off, = On). Allow 1 minute for the router to run through its bootup sequence. Refer to the Understanding LEDs section of this guide for more information about LED indicator status. Understanding LEDs The E100 router uses LED lights on the front panel to communicate various status conditions. Use the table below to verify the status of your router after the 1-minute bootup cycle. NOTE: The icons are only visible when powered on and backlit. STATUS INDICATOR BEHAVIOR POWER: The Cradlepoint E100 must be powered using an approved 54 VDC power source. No Light = Not receiving power. Check the power switch and the power source connection. White = Powered on. Yellow = Battery at less than 20%. Blinking Yellow = Battery needs replacement. SIGNAL STRENGTH: LED bars indicate the active modems signal strength. 4 Solid Bars = Strongest signal. 1 Blinking Bar = Weakest signal (A blinking bar indicates half of a bar). 4 Blinking Bars = SIM door is not installed, modem is off. EMBEDDED MODEM: Indicates connection status for the embedded (internal) modem No Light = Modem not connected. Solid White = Modem has established an active connection. Blinking White = Modem is connecting. Solid Yellow = Modem is in the process of resetting. Blinking Yellow = Data connection error. No modem connection possible. WI-FI: Indicates the Wi-Fi status No Light = Wi-Fi is not operating. White = Wi-Fi is on and operating normally (2.4 GHz and/or 5 GHz) OTHER ADDITIONAL LED INDICATIONS ETHERNET PORT LIGHTS: LEDs on either side of each Ethernet port on the backside of the device indicating connection status. Green = 1Gbps Link/Activity Yellow = 10/100 Link/Activity Troubleshooting If the device takes longer than 5 minutes to connect to the Internet, log into the local UI of the device to make configuration changes or to start the troubleshooting process. You must be physically co-located with the device in order to do this. Refer to No Internet or Connection Issues for additional help. Resources E100 Data Sheet Help and Support Cradlepoint Customer Connect Community Cradlepoint Support Services E100 Router Models This document applies to the following E100 models:

CRADLEPOINT E100 MODEL: S5A036A Terms of Service Cradlepoint Terms of Service & License Agreement Privacy Policy

MODEL: S5A036A SAFETY, REGULATORY, AND WARRANTY GUIDE CRADLEPOINT E110-C4D This important Safety, Regulatory, and Warranty Guide contains safety, handling, disposal, regulatory, trademark, copyright, and software licensing information. Read all safety information below and operating instructions before using the device to avoid injury. CAUTION: Risk of explosion if the battery is replaced with the incorrect type. If the backup battery is installed, use only Getac Branded, and UL Listed battery, Model: 170848-000. ATTENTION : Risque dexplosion si la batterie est remplace par le type incorrect. Si la batterie de secours est installe, utilisez uniquement Getac Branded et la batterie UL Listed, Modle : 170848-000. FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Increase the separation between the equipment and receiver. Consult the dealer or an experienced radio/TV technician for help. FCC CAUTION Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC STATEMENT For product available in the USA/Canada market, only channel 1-11 can be operated. Selection of other channels is not possible. Operation on the 5150-5250 MHz WiFi radio is restricted to indoor use only. FCC RADIATION EXPOSURE STATEMENT This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. To comply with FCC regulations limiting both maximum RF output power and human exposure to RF radiation, the maximum cellular antenna gain must not exceed 0.7dBi (663~698MHz), 0.7dBi(688~716MHz), 0.7dBi (777~787MHz), 0.7dBi(788~798 MHz), 0.72dBi(824~849MHz), 1.54dBi(1710~1755), 1.54dBi(1850~1910 MHz). INDUSTRY CANADA STATEMENT This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. For product available in the USA/Canada market, only channel 1-11 can be operated. Selection of other channels is not possible. The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. INDUSTRY CANADA RADIATION EXPOSURE STATEMENT This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. These radio transmitters (IC:6921A-S5A036A, 10224A-2018EC25AF) have been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. These devices have been designed to operate with cellular antennas having a maximum gain of 0.7dBi (663~698MHz), 0.7dBi(688~716MHz), 0.7dBi (777~787MHz), 0.7dBi(788~798 MHz), 0.72dBi(824~849MHz), 1.54dBi(1710~1755), 1.54dBi(1850~1910 MHz). Antennas having a higher gain are strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. EXTERNAL LTE ANTENNA P/N:170801-000 This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi-transmitter product procedures. DCLARATION DINDUSTRIE CANADA Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Pour les produits disponibles aux tats-Unis / Canada du march, seul le canal 1 11 peuvent tre exploits. Slection d'autres canaux n'est pas possible. les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. NOTE IMPORTANTE (POUR LUTILISATION DE DISPOSITIFS MOBILES):

DCLARATION DEXPOSITION AUX RADIATIONS Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 25 cm de distance entre la source de rayonnement et votre corps. Cet appareil et son antenne (s) ne doit pas tre co-localiss ou fonctionnement en association avec une autre antenne ou transmetteur. Le prsent metteur radio (IC:6921A-S5A036A, 10224A-2018EC25AF) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Ce dispositive a ete concu pour fonctionner ave une antenna cellulaire ayant un gain maximal de 0.7dBi (663~698MHz), 0.7dBi(688~716MHz), 0.7dBi

(777~787MHz), 0.7dBi(788~798 MHz), 0.72dBi(824~849MHz), 1.54dBi(1710~1755), 1.54dBi(1850~1910 MHz).. Une antenne a gain plus eleve est strictement interdite par les reglemnets dIndustrie Canada. Limpedance dantenne requise est de 50 ohms. SAFETY AND HAZARDS Caution!! Read following instruction before use. Only use with original Cradlepoint accessories. Cradlepoint external power suppliers are specially designed to operate properly with this device. Under no circumstances should the device be used in any areas

(a) where blasting is in progress,

(b) where explosive atmospheres may be present, or

(c) that are near (i) medical or life support equipment, or (ii) any equipment which may be susceptible to any form of radio interference. In such areas, the device MUST BE POWERED OFF AT ALL TIMES (since the device otherwise could transmit signals that might interfere with such equipment). In addition, under no circumstances should the device be used in any aircraft, regardless of whether the aircraft is on the ground or in flight. In any aircraft, the device MUST BE POWERED OFF AT ALL TIMES since the device otherwise could transmit signals that might interfere with various onboard systems on such aircraft. Furthermore, under no circumstances should the device be used by the driver or operator of any vehicle. Such use of the device will detract from the drivers or operators control of that vehicle. In some jurisdictions, use of the device while driving or operating a vehicle constitutes a civil and/or criminal offense. Due to the nature of wireless communications, transmission and reception of data by the device can never be guaranteed, and it is possible that data communicated or transmitted wirelessly may be delayed, corrupted (i.e., contain errors), or totally lost. The device is not intended for, and Cradlepoint recommends the device not be used in any critical applications where failure to transmit or receive data could result in property damage or loss or personal injury of any kind (including death) to the user or to any other party. Cradlepoint expressly disclaims liability for damages of any kind resulting from:

(a) delays, errors, or losses of any data transmitted or received using the device; or

(b) any failure of the device to transmit or receive such data. Warning: This product is only to be installed by qualified personnel. Purchaser agrees to indemnify Cradlepoint against any liability or damages caused to third parties as a result of Purchasers misuse or misapplication of the Cradlepoint product. 10 July 2020 Document Part: 170851-000 (Draft 1) OPEN SOURCE SOFTWARE This product contains software distributed under one or more of the following open source licenses: GNU General Public License Version 2, BSD License, Net-SNMP License, and PSF License Agreement for Python 3.3. For more information on this software, including licensing terms and your rights to access source code, contact Cradlepoint at Cradlepoint.com/opensource. HARDWARE WARRANTY INFORMATION Cradlepoint, Inc. warrants this hardware product against defects in materials and workmanship to the original purchaser for a period of three

(3) years from the date of shipment. This warranty is limited to a repair or replacement of the hardware product, at Cradlepoints discretion, as purchasers sole and exclusive remedy. If this hardware product was procured as a component of a NetCloud Solution Package, additional warranty may be available. Please see Cradlepoints website for details. Cradlepoint does not warrant that the operation of the product will meet your requirements or be error free. CRADLEPOINT MAKES NO OTHER WARRANTY, EITHER EXPRESSED OR IMPLIED. CRADLEPOINT SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE OR NON-

INFRINGEMENT. LIMITATION OF CRADLEPOINT LIABILITY The information contained in this Safety, Regulatory, and Warranty Guide is subject to change without notice and does not represent any commitment on the part of Cradlepoint or its affiliates. CRADLEPOINT AND ITS AFFILIATES HEREBY SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL: (A) DIRECT, INDIRECT, SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING WITHOUT LIMITATION FOR LOSS OF PROFITS OR REVENUE OR OF ANTICIPATED PROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT, EVEN IF CRADLEPOINT AND/OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND EVEN IF SUCH DAMAGES ARE FORESEEABLE; OR (B) CLAIMS BY ANY THIRD PARTY. NOTWITHSTANDING THE FOREGOING, IN NO EVENT SHALL THE AGGREGATE LIABILITY OF CRADLEPOINT AND/OR ITS AFFILIATES ARISING UNDER OR IN CONNECTION WITH THE PRODUCT, REGARDLESS OF THE NUMBER OF EVENTS, OCCURRENCES, OR CLAIMS GIVING RISE TO LIABILITY, EXCEED THE PRICE PAID BY THE ORIGINAL PURCHASER OF THE PRODUCT. THE LIMITATIONS OF LIABILITY SET FORTH HEREIN SHALL REMAIN IN FULL FORCE AND EFFECT REGARDLESS OF WHETHER THE REMEDIES HEREUNDER ARE DETERMINED TO HAVE FAILED OF THEIR ESSENTIAL PURPOSE. PRIVACY Cradlepoint may collect general data pertaining to the use of Cradlepoint products via your Internet connection (wired and/or wireless) such as device ID/serial number, network status, IP address, MAC address, operating system, browser type and version number, etc., in order to provide you with better services, enhance user experience, and improve performance. OTHER BINDING DOCUMENTS; TRADEMARKS; COPYRIGHT By activating or using your E100 or E110 device, you agree to be bound by Cradlepoints Terms of Use, User License and other applicable Legal Policies. 2015 Cradlepoint, Inc. All rights reserved. Cradlepoint is not responsible for omissions or errors in typography or photography. Cradlepoint, E100, E110, and the Cradlepoint logo are trademarks of Cradlepoint, Inc. in the US and other countries. Other trademarks are property of their respective owners. ROUTER COMMUNICATION/DATA USAGE The factory default configuration of the router is set to communicate with Cradlepoint and other resources at regular intervals to access the latest firmware and modem updates, clock synchronization (NTP), and NetCloud Manager (ECM) membership. Such communication may result in data usage and applicable charges regardless of whether the router uses a wired or wireless Internet connection. To avoid such data usage and potential charges, consult the following Knowledge Base article:

http://knowledgebase.cradlepoint.com/articles/support/router-

communication-data-usage 10 July 2020 Document Part: 170851-000 (Draft 1)

MODEL: S5A037A SAFETY, REGULATORY, AND WARRANTY GUIDE CRADLEPOINT E100-C4D This important Safety, Regulatory, and Warranty Guide contains safety, handling, disposal, regulatory, trademark, copyright, and software licensing information. Read all safety information below and operating instructions before using the device to avoid injury. CAUTION: Risk of explosion if the battery is replaced with the incorrect type. If the backup battery is installed, use only Getac Branded, and UL Listed battery, Model: 170848-000. ATTENTION : Risque dexplosion si la batterie est remplace par le type incorrect. Si la batterie de secours est installe, utilisez uniquement Getac Branded et la batterie UL Listed, Modle : 170848-000. FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Increase the separation between the equipment and receiver. Consult the dealer or an experienced radio/TV technician for help. FCC CAUTION Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC STATEMENT For product available in the USA/Canada market, only channel 1-11 can be operated. Selection of other channels is not possible. Operation on the 5150-5250 MHz WiFi radio is restricted to indoor use only. FCC RADIATION EXPOSURE STATEMENT This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. To comply with FCC regulations limiting both maximum RF output power and human exposure to RF radiation, the maximum cellular antenna gain must not exceed 0.7dBi (663~698MHz), 0.7dBi(688~716MHz), 0.7dBi

(777~787MHz), 0.7dBi(788~798 MHz), 0.72dBi(824~849MHz), 1.54dBi(1710~1755), 1.54dBi(1850~1910 MHz). INDUSTRY CANADA STATEMENT This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. For product available in the USA/Canada market, only channel 1-11 can be operated. Selection of other channels is not possible. The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. INDUSTRY CANADA RADIATION EXPOSURE STATEMENT This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. These radio transmitters (IC:6921A-S5A036A, 10224A-2018EC25AF) have been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. These devices have been designed to operate with cellular antennas having a maximum gain of 0.7dBi (663~698MHz), 0.7dBi(688~716MHz), 0.7dBi

(777~787MHz), 0.7dBi(788~798 MHz), 0.72dBi(824~849MHz), 1.54dBi(1710~1755), 1.54dBi(1850~1910 MHz) Antennas having a higher gain are strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi-transmitter product procedures. DCLARATION DINDUSTRIE CANADA Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Pour les produits disponibles aux tats-Unis / Canada du march, seul le canal 1 11 peuvent tre exploits. Slection d'autres canaux n'est pas possible. les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. NOTE IMPORTANTE (POUR LUTILISATION DE DISPOSITIFS MOBILES):

DCLARATION DEXPOSITION AUX RADIATIONS Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 25 cm de distance entre la source de rayonnement et votre corps. Cet appareil et son antenne (s) ne doit pas tre co-localiss ou fonctionnement en association avec une autre antenne ou transmetteur. Le prsent metteur radio (IC:6921A-S5A036A, 10224A-2018EC25AF) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Ce dispositive a ete concu pour fonctionner ave une antenna cellulaire ayant un gain maximal de 0.7dBi (663~698MHz), 0.7dBi(688~716MHz), 0.7dBi

(777~787MHz), 0.7dBi(788~798 MHz), 0.72dBi(824~849MHz), 1.54dBi(1710~1755), 1.54dBi(1850~1910 MHz).Une antenne a gain plus eleve est strictement interdite par les reglemnets dIndustrie Canada. Limpedance dantenne requise est de 50 ohms. SAFETY AND HAZARDS Caution!! Read following instruction before use. Only use with original Cradlepoint accessories. Cradlepoint external power suppliers are specially designed to operate properly with this device. Under no circumstances should the device be used in any areas

(a) where blasting is in progress,

(b) where explosive atmospheres may be present, or

(c) that are near (i) medical or life support equipment, or (ii) any equipment which may be susceptible to any form of radio interference. In such areas, the device MUST BE POWERED OFF AT ALL TIMES (since the device otherwise could transmit signals that might interfere with such equipment). In addition, under no circumstances should the device be used in any aircraft, regardless of whether the aircraft is on the ground or in flight. In any aircraft, the device MUST BE POWERED OFF AT ALL TIMES since the device otherwise could transmit signals that might interfere with various onboard systems on such aircraft. Furthermore, under no circumstances should the device be used by the driver or operator of any vehicle. Such use of the device will detract from the drivers or operators control of that vehicle. In some jurisdictions, use of the device while driving or operating a vehicle constitutes a civil and/or criminal offense. Due to the nature of wireless communications, transmission and reception of data by the device can never be guaranteed, and it is possible that data communicated or transmitted wirelessly may be delayed, corrupted (i.e., contain errors), or totally lost. The device is not intended for, and Cradlepoint recommends the device not be used in any critical applications where failure to transmit or receive data could result in property damage or loss or personal injury of any kind (including death) to the user or to any other party. Cradlepoint expressly disclaims liability for damages of any kind resulting from:

(a) delays, errors, or losses of any data transmitted or received using the device; or

(b) any failure of the device to transmit or receive such data. Warning: This product is only to be installed by qualified personnel. Purchaser agrees to indemnify Cradlepoint against any liability or damages caused to third parties as a result of Purchasers misuse or misapplication of the Cradlepoint product. 10 July 2020 Document Part: 170852-000 (Draft1) OPEN SOURCE SOFTWARE This product contains software distributed under one or more of the following open source licenses: GNU General Public License Version 2, BSD License, Net-SNMP License, and PSF License Agreement for Python 3.3. For more information on this software, including licensing terms and your rights to access source code, contact Cradlepoint at Cradlepoint.com/opensource. HARDWARE WARRANTY INFORMATION Cradlepoint, Inc. warrants this hardware product against defects in materials and workmanship to the original purchaser for a period of three

(3) years from the date of shipment. This warranty is limited to a repair or replacement of the hardware product, at Cradlepoints discretion, as purchasers sole and exclusive remedy. If this hardware product was procured as a component of a NetCloud Solution Package, additional warranty may be available. Please see Cradlepoints website for details. Cradlepoint does not warrant that the operation of the product will meet your requirements or be error free. CRADLEPOINT MAKES NO OTHER WARRANTY, EITHER EXPRESSED OR IMPLIED. CRADLEPOINT SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE OR NON-

INFRINGEMENT. LIMITATION OF CRADLEPOINT LIABILITY The information contained in this Safety, Regulatory, and Warranty Guide is subject to change without notice and does not represent any commitment on the part of Cradlepoint or its affiliates. CRADLEPOINT AND ITS AFFILIATES HEREBY SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL: (A) DIRECT, INDIRECT, SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING WITHOUT LIMITATION FOR LOSS OF PROFITS OR REVENUE OR OF ANTICIPATED PROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT, EVEN IF CRADLEPOINT AND/OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND EVEN IF SUCH DAMAGES ARE FORESEEABLE; OR (B) CLAIMS BY ANY THIRD PARTY. NOTWITHSTANDING THE FOREGOING, IN NO EVENT SHALL THE AGGREGATE LIABILITY OF CRADLEPOINT AND/OR ITS AFFILIATES ARISING UNDER OR IN CONNECTION WITH THE PRODUCT, REGARDLESS OF THE NUMBER OF EVENTS, OCCURRENCES, OR CLAIMS GIVING RISE TO LIABILITY, EXCEED THE PRICE PAID BY THE ORIGINAL PURCHASER OF THE PRODUCT. THE LIMITATIONS OF LIABILITY SET FORTH HEREIN SHALL REMAIN IN FULL FORCE AND EFFECT REGARDLESS OF WHETHER THE REMEDIES HEREUNDER ARE DETERMINED TO HAVE FAILED OF THEIR ESSENTIAL PURPOSE. PRIVACY Cradlepoint may collect general data pertaining to the use of Cradlepoint products via your Internet connection (wired and/or wireless) such as device ID/serial number, network status, IP address, MAC address, operating system, browser type and version number, etc., in order to provide you with better services, enhance user experience, and improve performance. OTHER BINDING DOCUMENTS; TRADEMARKS; COPYRIGHT By activating or using your E100 or E110 device, you agree to be bound by Cradlepoints Terms of Use, User License and other applicable Legal Policies. 2015 Cradlepoint, Inc. All rights reserved. Cradlepoint is not responsible for omissions or errors in typography or photography. Cradlepoint, E100, E110, and the Cradlepoint logo are trademarks of Cradlepoint, Inc. in the US and other countries. Other trademarks are property of their respective owners. ROUTER COMMUNICATION/DATA USAGE The factory default configuration of the router is set to communicate with Cradlepoint and other resources at regular intervals to access the latest firmware and modem updates, clock synchronization (NTP), and NetCloud Manager (ECM) membership. Such communication may result in data usage and applicable charges regardless of whether the router uses a wired or wireless Internet connection. To avoid such data usage and potential charges, consult the following Knowledge Base article:

http://knowledgebase.cradlepoint.com/articles/support/router-

communication-data-usage 10 July 2020 Document Part: 170852-000 (Draft1)

FCC LABEL & Label LOCATION The label will be permanently affixed at a conspicuous location on the device. F FCC ID: UXX-S5A036A

Spiderman ID artwork CMF Definition Rev:1.0 color& Graphics Loki label Designer:ME Department Date:Jun.29.2020 1.40 mm m m 0 4

. 1 Bottom label=70x60 mm

Part: E100-C4D E100 Default Password Serial

: MM202800123456 MAC:0030 4414 f6bb IMEI:355 6890 9001 5240 MEID:35 5689 0900 1524 SSID: E100-6bb Model: S5A037A FCC ID:UXX-S5A036A IC:6921A-S5A036A Contains FCC ID: XMR201808EC25AF Contains IC: 10224A-2018EC25AF A Part: E100-C4D E100 Default Password Serial

: MM202800123456 MAC:0030 4414 f6bb IMEI:355 6890 9001 5240 MEID:35 5689 0900 1524 SSID: E100-6bb Model: S5A037A FCC ID:UXX-S5A036A IC:6921A-S5A036A Contains FCC ID: XMR201808EC25AF Contains IC: 10224A-2018EC25AF A

Date: 2021-04-29 FCC ID: UXX-S5A036A A U T H O R I Z A T I O N L E T T E R To Whom It May Concern:

Cradlepoint, Inc.hereby authorizes Debby Lin/ Senior Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan), to act on its behalf in all matters relating to the Federal Communication Commission (FCC) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Debby Lin/ Senior Specialist of BV CPS Taoyuan on Cradlepoint, Incs behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please dont hesitate to contact us. Sincerely yours,

Pankaj Malhotra SVP Engineering Cradlepoint, Inc. Tel: +1 208 424 5054 Email: pmalhotra@cradlepoint.com 1111 W Jefferson St, Boise, ID 83702 Toll Free: 855.813.3385 Local: 208.424.5054 Fax: 208.429.6852 cradlepoint.com DocuSign Envelope ID: 1260EEBC-98C1-41B6-818D-3BA542FE3715

DFS device channel plan and software operational declaration Date: 2021-04-29 FCC ID: UXX-S5A036A. We, Cradlepoint, Inc, declare that the device, FCC ID: UXX-S5A036A Model Name: S5A036A, S5A037A, does not have Ad Hoc on non-US frequencies and/or on DFS frequencies. Also, the client software and associated drivers will not initiate any transmission on DFS frequencies without initiation by a master. This includes restriction on transmissions for beacons and support for ad-hoc peer-to-peer modes. Below is the channel / frequency plan for the device:

Frequency (MHz) 2412 Active Scan Type 1 2 2417 11 2462 Active Active Active Active Active Active Active Active Active Active 3 2422 4 2427 9 2452 5 2432 8 2447 10 2457 6 2437 7 2442 Frequency (MHz) 5180 36 48 42 5240 5210 Active Active Active Active Active Active Active 44 5220 40 5200 38 5190 46 5230 Frequency (MHz) 5260 Active Passive Scan Type 52 54 5270 Active Passive 56 5280 Active Passive 58 5290 Active Passive 60 5300 Active Passive 62 5310 Active Passive 64 5320 Active Passive CH Scan Type 100 Frequency (MHz) 5500 Active Passive 124 Frequency (MHz) 5620 Active Passive Scan Type CH 102 5510 Active Passive 126 5630 Active Passive 104 5520 Active Passive 128 5640 Active Passive 106 5530 Active Passive 132 5660 Active Passive 108 5540 Active Passive 134 5670 Active Passive 110 5550 Active Passive 136 5680 Active Passive 112 5560 Active Passive 138 5690 Active Passive 116 5580 Active Passive 140 5700 Active Passive 118 5590 Active Passive 142 5710 Active Passive 120 5600 Active Passive 144 5720 Active Passive 122 5610 Active Passive 149 Frequency (MHz) 5745 165 5825 Active Active Active Active Active Active Active Active 157 5785 153 5765 155 5775 151 5755 159 5795 161 5805 Scan Type 2.4G CH 5G band 1 CH Scan Type 5G band 2 CH 5G band 3 5G band 4 CH 1111 W Jefferson St, Boise, ID 83702 Toll Free: 855.813.3385 Local: 208.424.5054 Fax: 208.429.6852 cradlepoint.com DocuSign Envelope ID: 1260EEBC-98C1-41B6-818D-3BA542FE3715 Also, on DFS channels, the WLAN driver in the device operates under the control of an AP at all times, except when in ad-hoc mode on US non-DFS channels. The device passively scans DFS frequencies until a master device is detected. The control of this functionality is not accessible to anyone under any conditions. Furthermore, the firmware is protected by a special signature and CRC checksum. Signature and CRC checksum will be calculated and verified before firmware upgrade. Unauthorized modification to firmware will lead to the failure of verification and thus firmware upgrade will not be allowed. Sincerely yours,

Pankaj Malhotra SVP Engineering Cradlepoint, Inc. Tel: +1 208 424 5054 Email: pmalhotra@cradlepoint.com 1111 W Jefferson St, Boise, ID 83702 Toll Free: 855.813.3385 Local: 208.424.5054 Fax: 208.429.6852 cradlepoint.com DocuSign Envelope ID: 1260EEBC-98C1-41B6-818D-3BA542FE3715

Date: 2021-04-29 FCC ID: UXX-S5A036A To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:

Software Operational Description Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours,

Pankaj Malhotra SVP Engineering Cradlepoint, Inc. Tel: +1 208 424 5054 Email: pmalhotra@cradlepoint.com 1111 W Jefferson St, Boise, ID 83702 Toll Free: 855.813.3385 Local: 208.424.5054 Fax: 208.429.6852 cradlepoint.com DocuSign Envelope ID: 1260EEBC-98C1-41B6-818D-3BA542FE3715

DocuSign Envelope ID: 50F3631B-B998-48F6-B288-5234951EC2E8 Description of Permissive Change Date: 4/19/2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Ref: Class III permissive change Applicant: Cradlepoint, Inc. Dear Examiner, This is to request a Class III permissive change for FCC ID: UXX-S5A946A S5A036A This Equipment is prepared for FCC Reassessment. The difference compared with original is adding Bands NII-2A and NII-2C with DFS Master and client with radar detection. The product hardware is identical and new band is adding through software enabling. If you have any questions regarding this application, please feel free to contact me. Sincerely yours,

Pankaj Malhotra SVP Engineering Cradlepoint, Inc. Tel: +1 208 424 5054 Email: pmalhotra@cradlepoint.com

Date: 2019-12-03 FCC ID:UXX-S5A946A AUTHORIZATION LETTER To Whom It May Concern:

Cradlepoint,Inc, hereby authorizes Debby Lin of Bureau Veritas Consumer Products Serice (H.K.) Ld., Taoan Branch (BV CPS Taoan), o ac on i behalf in all maer relaing o he Federal Commnicaion Commiion (FCC) applicaion for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Debby Lin of BV CPS Taoan on Cradlepoin, Inc behalf, ihin he cope of he poer graned herein, shall have the same effect as acts of its own. If o hae an qeion regarding he ahoriaion, pleae don heiae o conac us. Sincerely yours,

Pankaj Malhotra SVP Engineering Cradlepoint, Inc. Tel: +1 208 424 5054 Email: pmalhotra@cradlepoint.com 1111 W Jefferson St, Boise, ID 83702 Toll Free: 855.813.3385 Local: 208.424.5054 Fax: 208.429.6852 cradlepoint.com

Federal Communications Commission Authorization and Evaluation Division FCC ID: UXX-S5A036A To Whom It May Concern, Confidentiality Request Date: August , 00 Long Term Confidentiality Pursuant to Sections 0. and 0. of the Commissions Rules, we hereby respectfully request confidential treatment of information accompanying this application as outlined below:

Schematics Block Diagram Operational Descriptions Software Operating Description Tune-up procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Short Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby respectfully request short-

term confidential treatment of information accompanying this application as outlined below until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device:

External Photos Internal Photos 1111 W Jefferson St, Boise, ID 83702 Toll Free: 855.813.3385 Local: 208.424.5054 Fax: 208.429.6852 cradlepoint.com Test Setup Photos User Manual Sincerely,

Pankaj Malhotra SVP Engineering Cradlepoint, Inc. Tel: +1 208 424 5054 Email: pmalhotra@cradlepoint.com 1111 W Jefferson St, Boise, ID 83702 Toll Free: 855.813.3385 Local: 208.424.5054 Fax: 208.429.6852 cradlepoint.com

AUTHORIZATION LETTER Date: August 14, 2020 FCC ID: UXX-S5A036A IC : 6921A-S5A036A To whom it may concern:

I, the undersigned Steven T. Wood of Cradlepoint Inc. hereby authorize Pankaj Malhotra of Cradlepoint Inc. to act on my behalf in all matters relating to all processes required in FCC and ISED for the identifiers above, and any communication needed with the national authorities. Any and all acts carried out by Pankaj Malhotra on my behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please dont hesitate to contact us. Thank you!

Sincerely yours,

Steven T. Wood VP Global Services & Support Cradlepoint Inc. Tel: (208) 424-5054 E-mail: swood@cradlepoint.com 1111 W Jefferson St, Boise, ID 83702 Toll Free: 855.813.3385 Local: 208.424.5054 Fax: 208.429.6852 cradlepoint.com

We, Cradlepoint, Inc. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: UXX-S5A036A If o hold hae an eion() egading hi declaaion, leae don heiae o conac us. Thank you!

____________________ Pankaj Malhotra SVP Engineering Cradlepoint, Inc. Tel: +1 208 424 5054 Email: pmalhotra@cradlepoint.com Date: August 7, 2020 1111 W Jefferson St, Boise, ID 83702 Toll Free: 855.813.3385 Local: 208.424.5054 Fax: 208.429.6852 cradlepoint.com