VN2000 Bill Acceptor Combo Front, Side & Contactless Bezel Kit Installation Guide VN2000 Bill Acceptor Combo Front, Side & Contactless Bezel Kit Installation Guide General Information General Information The combo bezel kit has been designed to add a credit cards reader to a Series 2000 bill acceptors. The combo bezel kit has been designed to add a credit cards reader to a Series 2000 bill acceptors. The combo bezel replaces the compact bezel. The combo bezel replaces the compact bezel. To remove the compact bezel:
1. Remove four phillips screws (A) located on the front of the bill acceptor. Remove the bezel and mounting plate. To remove the compact bezel:
1. Remove four phillips screws (A) located on the front of the bill acceptor. Remove the bezel and mounting plate. Combo bezel installation Combo bezel installation 2. Place the combo bezel on the bill acceptor and install the four screws. Be cautious not to pinch or damage the bezel cable when installing the combo bezel. 2. Place the combo bezel on the bill acceptor and install the four screws. Be cautious not to pinch or damage the bezel cable when installing the combo bezel.
*See notes 1 to 3 below
*See notes 1 to 3 below Contactless Contact our Technical Support @ 1-800-345-8172 with any questions. Side Swipe Front Swipe Contactless Contact our Technical Support @ 1-800-345-8172 with any questions. Side Swipe Front Swipe Notes:
1) FCC ID: QP8MEICARD Notes:
1) FCC ID: QP8MEICARD 2) CAUTION: changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 2) CAUTION: changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 3) This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (a) This device may not cause harmful interference, and (b) this device must accept any interference received, including interference that may cause undesired operation. 3) This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (a) This device may not cause harmful interference, and (b) this device must accept any interference received, including interference that may cause undesired operation. 2007 MEI Inc. wwwmeigroup.com Part # 250054258 Revision G2 2007 MEI Inc. wwwmeigroup.com Part # 250054258 Revision G2