FCC ID: 2BBYH-C1037 Smart Watch

SmartPace R1 Pro User Guide Steps for Use You can follow these steps to use SmartPace R1 Pro: Wear Power On Set up Start Using The following steps will take approximately 5 to 10 minutes, please schedule a suitable time. Front Back Charging cable Digital Crown Screen Band Magnetic Charging Contacts Heart Rate and Blood Oxygen Sensors Power On Press the Digital Crown until the startup screen appears. Note: If the watch can't power on, it may be because the battery has drained due to long periods of inactivity. Please charge it for approximately 10 minutes and wait for it to power on automatically. Wear Your Watch For optimal data accuracy, please observe the following guidelines while wearing the watch: 1. Wear the watch at a position approximately two finger-widths from your wrist bone. 2. For comfort, adjust the band to allow a finger's width between it and your wrist. This ensures both contact and fit. Magnetic Charging Cable Button Crown and Button Press 1. Press the digital crown to wake up the screen. 2. Press the digital crown to enter the app center from the watch face screen. 3. Exit an app. Rotate 1.Toggle between screens or navigate through menus. 2. Adjust the volume of prompt tones and phone calls. Go to the app store on your phone, search for Fitbeing, and install it. Wear Your Watch Step 1: Download the Fitbeing app. For Android phones, go to the Google Play. For iPhone, go to the App Store. You can also scan the QR code on the left to quickly go to the Fitbeing app in the app store, and install it. Step 2: Pair with the App Open the Fitbeing app and select "Set Up a Device" on the home page. Follow the instructions to pair your " SmartPace R1 Pro " via Bluetooth. Then you can start using the watch. Attentions: 1. To prevent connection issues between the app and the watch, please do not pair directly within the Bluetooth device list in your phone's system settings. 2. To ensure successful pairing, please grant Fitbeing App permissions to access Bluetooth, Location, and Camera on your phone. Search via Bluetooth Get Started Touchscreen Operation Support full-screen touch (swipe, tap, touch and hold) Press the button 1. Press to start Workout quickly. 2. Long press to activate SOS. Rotate the crown Press the button Swipe up Swipe left Swipe right Swipe down Common Functions. Notification Center Swipe down on the watch face screen. Change the Watch Face To change the watch face, press and hold the screen for 1 second to access the watch face gallery. Control Center To access the Control Center, swipe up on the watch face screen. Enable features like Silent Mode, Sleep Mode, Always-on Display, and adjust brightness and volume swiftly. Tiles To switch quickly between the Suggestions, Activity, Heart Rate, Sleep, Weather, or Workout tiles, swipe left or right on the watch face screen. Health Metrics Measurement When wearing the watch, it automatically measures health data such as heart rate, sleep, stress, and activity. You can also view and track this data in the application. Change the Watch Face To change the watch face, press and hold the screen for 1 second to access the watch face gallery. For outdoor workouts, wait in an open area until the GPS connects. The blinking icon " " shows it's acquiring a location fix and will stop blinking upon success. Install band 1. Insert the metal pin at position "A" in the hole. 2. Push and hold the spring bar. 3. Press the band into the body and release the spring bar. 4. Pull the watch band to confirm the firm installation. A Charge the Watch Remove band 1. Lift the spring bar from the groove. 2. Push and hold the spring bar. 3. Pull it out gently to remove the band. Install New Watch Faces In the Fitbeing app, navigate to the Face Gallery page to pick up your preferred watch face. Charge the Watch To charge the watch, connect the charging cable to a USB power source. Attach the other end to the charging contact on the back of the watch. The watch will display a charging icon while it is being charged. Note: Make sure the USB charging plug is at the same side as the crown. Ensure to use a standard USB power source with an output of 5V1A or above. Prior to charging, ensure to clean the charging contacts of the watch to eliminate any lingering sweat or moisture. Spring bar Wear and Care It is advised to remove the watch for approximately one hour daily. If you experience discomfort or irritation like redness, tingling, or a burning sensation, take off the watch and rest your wrist. To maintain hygiene, regularly clean your watch and wrist, particularly after workouts and sweating. Avoid using hand soap, shower gel, dishwashing liquid, or cleaning wipes as they can cause skin irritation. Instead, use mild soap and fresh water to clean the band. Design for Comfortable Wearing The inner sweat grooves of the band are specifically designed to minimize skin irritation resulting from sweat, moisture, and prolonged wear. Key Specifications Product Name SmartPace R1 Pro Display 1.43" HD AMOLED Resolution 466 x 466 Battery Capacity 400 mAh Wireless Connection Bluetooth 5.3 Water resistance garde 3ATM Satellite positioning Support GPS\BDS\GAL\GLO\QZS\SBAS Geomagnetic sensor Support compass Air pressure senso Supports elevation Body Dimension 46.5mm 46.5mm 11.6mm Working Temperature 0C ~ 50C Compatible Operating Systems iOS 13.0 and above, Android 9.0 and above Help and Guide Frequently Asked Questions If you encounter any problems while using the product, you can access the "Profile Help & Support" section in the Fitbeing app for assistance. Scan the QR code on the right to access or visit help.fitbeing.com for assistance. Precautions Do not replace the built-in battery yourself as it may pose a safety risk. Avoid forcibly opening the watch case, as it may cause short circuits and overheating. Keep the watch away from environments exceeding 60 to prevent battery leakage or explosion. While the product complies with 3ATM waterproof standards, it is not recommended for activities such as bathing, diving, or water skiing that involve high temperatures, steam, or rapid water flow. Note that the waterproof performance may be compromised if the product structure is damaged. Be aware that firmware upgrades can lead to interface and usage changes. For detailed information, please refer to the product's upgrade instructions. Product Manual You can find the complete product manual in Fitbeing app at "Profile User Guide". Scan the QR code on the right to access it, or visit help.fitbeing.com to browse. FCC Requirement Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.product's upgrade instructions. ISED This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. L'metteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : 1. Lappareil ne doit pas produire de brouillage; 2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.

SmartPace R1 User Guide Steps for Use You can follow these steps to use SmartPace R1: Wear Power On Set up Start Using The following steps will take approximately 5 to 10 minutes, please schedule a suitable time. Front Back Charging cable Digital Crown Screen Band Magnetic Charging Contacts Heart Rate and Blood Oxygen Sensors Power On Press the Digital Crown until the startup screen appears. Note: If the watch can't power on, it may be because the battery has drained due to long periods of inactivity. Please charge it for approximately 10 minutes and wait for it to power on automatically. Wear Your Watch For optimal data accuracy, please observe the following guidelines while wearing the watch: 1. Wear the watch at a position approximately two finger-widths from your wrist bone. 2. For comfort, adjust the band to allow a finger's width between it and your wrist. This ensures both contact and fit. Magnetic Charging Cable Button Crown and Button Press 1. Press the digital crown to wake up the screen. 2. Press the digital crown to enter the app center from the watch face screen. 3. Exit an app. Rotates 1.Toggle between screens or navigate through menus. 2. Adjust the volume of prompt tones and phone calls. Go to the app store on your phone, search for Fitbeing, and install it. Wear Your Watch Step 1: Download the Fitbeing app. For Android phones, go to the Google Play. For iPhone, go to the App Store. You can also scan the QR code on the left to quickly go to the Fitbeing app in the app store, and install it. Step 2: Pair with the App Open the Fitbeing app and select "Set Up a Device" on the home page. Follow the instructions to pair your " SmartPace R1 " via Bluetooth. Then you can start using the watch. Attentions: 1. To prevent connection issues between the app and the watch, please do not pair directly within the Bluetooth device list in your phone's system settings. 2. To ensure successful pairing, please grant Fitbeing App permissions to access Bluetooth, Location, and Camera on your phone. Search via Bluetooth Get Started Touchscreen Operation Support full-screen touch (swipe, tap, touch and hold) Press the button 1. Press to start Workout quickly. 2. Long press to activate SOS. Rotate the crown Press the button Swipe up Swipe left Swipe right Swipe down Common Functions. Notification Center Swipe down on the watch face screen. Change the Watch Face To change the watch face, press and hold the screen for 1 second to access the watch face gallery. Control Center To access the Control Center, swipe up on the watch face screen. Enable features like Silent Mode, Sleep Mode, Always-on Display, and adjust brightness and volume swiftly. Tiles To switch quickly between the Suggestions, Activity, Heart Rate, Sleep, Weather, or Workout tiles, swipe left or right on the watch face screen. Health Metrics Measurement When wearing the watch, it automatically measures health data such as heart rate, sleep, stress, and activity. You can also view and track this data in the application. Change the Watch Face To change the watch face, press and hold the screen for 1 second to access the watch face gallery. For outdoor workouts, wait in an open area until the GPS connects. The blinking icon " " shows it's acquiring a location fix and will stop blinking upon success. Install band 1. Insert the metal pin at position "A" in the hole. 2. Push and hold the spring bar. 3. Press the band into the body and release the spring bar. 4. Pull the watch band to confirm the firm installation. A Charge the Watch Remove band 1. Lift the spring bar from the groove. 2. Push and hold the spring bar. 3. Pull it out gently to remove the band. Install New Watch Faces In the Fitbeing app, navigate to the Face Gallery page to pick up your preferred watch face. Charge the Watch To charge the watch, connect the charging cable to a USB power source. Attach the other end to the charging contact on the back of the watch. The watch will display a charging icon while it is being charged. Note: Make sure the USB charging plug is at the same side as the crown. Ensure to use a standard USB power source with an output of 5V1A or above. Prior to charging, ensure to clean the charging contacts of the watch to eliminate any lingering sweat or moisture. Spring bar Wear and Care It is advised to remove the watch for approximately one hour daily. If you experience discomfort or irritation like redness, tingling, or a burning sensation, take off the watch and rest your wrist. To maintain hygiene, regularly clean your watch and wrist, particularly after workouts and sweating. Avoid using hand soap, shower gel, dishwashing liquid, or cleaning wipes as they can cause skin irritation. Instead, use mild soap and fresh water to clean the band. Design for Comfortable Wearing The inner sweat grooves of the band are specifically designed to minimize skin irritation resulting from sweat, moisture, and prolonged wear. Key Specifications Product Name SmartPace R1 Display 1.43" HD AMOLED Resolution 466 x 466 Battery Capacity 400 mAh Wireless Connection Bluetooth 5.3 Water resistance garde 3ATM Satellite positioning Support GPS\BDS\GAL\GLO\QZS\SBAS Geomagnetic sensor Support compass Air pressure senso Supports elevation Body Dimension 46.5mm 46.5mm 11.6mm Working Temperature 0C ~ 50C Compatible Operating Systems iOS 13.0 and above, Android 9.0 and above Help and Guide Frequently Asked Questions If you encounter any problems while using the product, you can access the "Profile Help & Support" section in the Fitbeing app for assistance. Scan the QR code on the right to access or visit help.fitbeing.com for assistance. Precautions Do not replace the built-in battery yourself as it may pose a safety risk. Avoid forcibly opening the watch case, as it may cause short circuits and overheating. Keep the watch away from environments exceeding 60 to prevent battery leakage or explosion. While the product complies with 3ATM waterproof standards, it is not recommended for activities such as bathing, diving, or water skiing that involve high temperatures, steam, or rapid water flow. Note that the waterproof performance may be compromised if the product structure is damaged. Be aware that firmware upgrades can lead to interface and usage changes. For detailed information, please refer to the product's upgrade instructions. Product Manual You can find the complete product manual in Fitbeing app at "Profile User Guide". Scan the QR code on the right to access it, or visit help.fitbeing.com to browse. FCC Requirement Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.product's upgrade instructions. ISED This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. L'metteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : 1. Lappareil ne doit pas produire de brouillage; 2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.

Creek Wearable Technology Co., Ltd. Date: November 19, 2024 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION FCC ID:2BBYH-C1037 To Whom It May Concern:

We, the undersigned, hereby authorize Shenzhen Huaxia Testing Technology Co., Ltd. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature:

Name:chen long Title:Manager

Creek Wearable Technology Co., Ltd. Date: November 19, 2024 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID:2BBYH-C1037 Creek Wearable Technology Co., Ltd. certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Applicant signature Applicant printed namechen long Creek Wearable Technology Co., Ltd. Date: November 19, 2024 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID:2BBYH-C1037 Creek Wearable Technology Co., Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Applicant signature Applicant printed namechen long

Creek Wearable Technology Co., Ltd. Date: November 19, 2024 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST Product :Smart Watch Model NO.:SmartPace R1, SmartPace R1 Pro FCC ID:2BBYH-C1037 To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (Schematic Diagram,Block Diagram,Operational Description) required to be submitted with this application be permanently withheld from public review. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Signature:

Name:chen long Title:Manager

Creek Wearable Technology Co., Ltd. Model Confirmation Letter We, Creek Wearable Technology Co., Ltd. certify the product:

Smart Watch Model No.: SmartPace R1, SmartPace R1 Pro FCC ID:2BBYH-C1037 IC:30903-C1037 SmartPace R1No payment function SmartPace R1 ProHave payment function Their electrical circuit design, layout, components used and internal wiring are identical, Only the color and payment function is different. Signiture:

Grantee Contact: chen long Company Name: Creek Wearable Technology Co., Ltd. Date: November 19, 2024

Creek Wearable Technology Co., Ltd. Address910, 5A office building, Longguang Jiuzuan, Longhua District, Shenzhen,China Grantee code:2BBYH FRN:0033975350 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing SUBJECT: FCC Application for FCC ID:2BBYH-C1037 Creek Wearable Technology Co., Ltd.. certifies that, as of the date of the filing of the application, Cleveland International Trade Agency . is our designated U.S. agent for service of process for the above referenced FCC ID. Creek Wearable Technology Co., Ltd. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Cleveland International Trade Agency accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information:

Name: Cleveland International Trade Agency Address: 4033 St Clair Ave, Cleveland, OH 44103, USA Contact Person: Becky Deng Tel.: 216-600-0606 Email: [email protected] FRN:0033401837 Sincerely, Signed on behalf of Creek Wearable Technology Co., Ltd Signed on behalf of Cleveland International Trade Agency Signature Name: chen long Title:Manager Date: 2024-11-12 Signature Name:Becky Deng Title: Manager Date:2024-11-19