BLUETOOTH INTERFACE GUIDE DOWNLOAD THE COMPLETE CRESSI INSTRUCTION MANUAL at: www.cressi.com/manuals
[
]
LONG LIFE BATTERY HIGH CONTRAST DISPLAY WIDE DIAMETER EASY ACCESS MULTI MODE 35 DISPLAY CRESSI BLUETOOTH INTERFACE PACK CONTENTS
- One Bluetooth Interface
- One 3V CR2430 battery
- One instructions manual. GENERAL WARNINGS
- Do not leave any packaging materials (plastic bags, cardboard boxes, etc.) within the reach of children as these can be hazardous.
- Before using the device, make sure that no products or components are damaged. If it is damaged, do not use the device and contact a qualified technician or your dealer.
- Do not try to repair the product but contact the Customer Service of Cressi
- Contact skilled technical personnel or Cressi Customer Service in the event of failure.
- To prevent risk of overheating, keep the Interface away from sources of heat, such as heaters, thermostats, stoves, cookers, etc.
- The battery must always be replaced by adults only and with other batteries having the same characteristics as those indicated in these instructions.
- Dispose of used batteries in compliance with existing regulations. Improper use of the battery may cause fires, explosions or other hazardous events.
- Danger of ingestion: the battery must be re-
placed by an adult in a place out of reach of children.
- Do not short circuit feed clamps.
- Always remove flat batteries from the product to avoid damages to the product by possible leakage.
- Do not use rechargeable batteries. Technical data:
System Requirements:
- Android: compatibility with OS 5.0 and higher
- iOS: compatibility with OS 10.0 and higher
- Communication Technology: Bluetooth Low Energy
- Frequency band: 2.4-2.485GHz
- Transmission power: 2.51mW
- Power: Disposable and non-rechargeable 3V , CR2430 battery
- Operating temperature: -10 C + 45 C CRESSI BLUETOOTH INTERFACE SYMBOLS KEY Instructions WARNING!Im oper use may create hazardous conditions. WARNING. Read the instructions for use. THIS PRODUCT COMPLIES WITH EU DIRECTIVE 2012/19/EC. The crossed bin symbol on the appliance indicates that the product, at the end of its life, must be disposed of separately from domestic waste, either by taking it to a separate waste disposal site for electric and electronic appliances or by returning it to your dealer when you buy another similar appliance. The user is responsible for taking the appliance to a special waste disposal site at the end of its life. If correctly as separate waste, recycled, is collected it can be of the disused appliance disposed treated and ecologically; this avoids a negative impact on both the environment and health, and contributes towards the recycling of the products materials. For further information regarding the waste disposal services available, contact your local waste disposal agency or the shop where you bought the appliance. THIS PRODUCT COMPLIES WITH EU DIRECTIVE 2006/66/EC AS AMENDED. The crossed-out wheeled bin symbol on the battery or its packaging, means that the batteries, at the end of their life, should be disposed of separately from the municipal waste stream via designated collection facilities appoint- ed by the government or the local authorities, or otherwise returned to the dealer when purchasing new equivalent rechargeable or non-rechargeable Chemical symbols (Hg for mercury, Cd for cadmium, Pb for lead) printed beneath the crossed-
out wheeled bin symbol indicate the type of substance contained in the battery. The user is responsible for taking the batteries to special waste disposal sites at the end of their life to allow for their processing and recycling. The correct disposal of your old toy will batteries. CRESSI BLUETOOTH INTERFACE prevent potential help negative consequences for the environment and human health and favor the recycling of the materials of which the product is made. Improper disposal of the product by the user may harm the environment and human health. For further information regarding the waste disposal services available, contact your local waste disposal agency or the shop where you bought the appliance. DECLARATION OF COMPLIANCE Cressi Sub hereby declares that this product is in conformity with the essential requirements and the related dispositions established by directive 2014/53/UE. A copy of the complete Declaration of Compliance at:
www.cressi.com. In European Commission Decision N2000/299/EC dated 06/04/2000, the frequency band used by this product has been harmonized for all EU Countries and therefore this is a Class 1 product which can be used in all European Community Countries. accordance with consulted can the be reproduction, Cressi Sub reserves the right to change information provided in this manual at any time and without notice. The transmission, transcription or translation into another language, of any part and in any form of this manual is strictly prohibited without prior written consent from Cressi Sub. FCC Notice This device complies with Part 15 of the FCC rules subject to the following two conditions:
1) This device may not cause harmful interference 2) This device must accept all interference received, including interference that may cause undesired operation. CRESSI BLUETOOTH INTERFACE to in a interference interference FCC STATEMENT NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in instructions, may accordance with the cause harmful radio communications. However, there is no guarantee that interference will not occur in a particular this If harmful equipment television interference television can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. cause radio or reception, which does to installation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment WARRANTY The product is guaranteed against any conformity defect in normal conditions of use as provided for by the instructions for use. The warranty shall not therefore apply in the case of damages caused by improper use, wear or accidental events. For the duration of warranty on conformity defects please refer to the specific provisions of national laws applicable in the country of purchase, where provided.
(Cressi Sub declares the duration of the guarantee in two years). CRESSI BLUETOOTH INTERFACE 1 1 1 2 Image 1 1 3 The Cressi BT Interface is a device able to connect to your smartphone via BT or USB to download the data related to your diving
(Image 1). 1: Power on button, press it to activate the Interface. 2: Green led, it blinks when the Interface is on (every 3 seconds, 100 ms on). 3: Red led, represents the Interface activity in three different ways. Case 1: waiting for connection
(every second, 100 ms on) Case 2: data download via BT
(every 2,5 s, 100 ms on) Case 3: data download via USB
(always on) CRESSI BLUETOOTH INTERFACE Image 2 install Download the APP Cressi from Apple Store or Google Store and it on your smartphone. Put your Interface on your clock to recognize it by the InfraRed sensor (see Image 2). Follow all the instructions to download your data. Note:
9 1 0 2 _ 8 0
. V E R Via G. Adamoli, 501 - 16165 GENOVA - ITALY TEL. +39 010 830.79.1 - FAX +39 010 830.79.220 info@cressi-sub.it - www.cressi.com