BonoBuds Hybrid Active Noise Cancelling Earbuds Thank you for purchasing the PHIATON BonoBuds
- Please follow the directions and read the guidelines carefully before use.
- Please keep the owners guide for future reference.
- Some functions of the PHIATON BonoBuds may not be available when it is paired with certain devices.
- The specifications are subject to change without prior notice for quality improvement. CONTENTS 1. Safety and general information 2. Package Contents 3. Pairing 4. Charging 5. Power ON/OFF the earbuds 6. Pairing with another Bluetooth device 7. Managing Music (play & control) 8. Call Function 9. Noise Cancelling Function 10. Ambient mode (Audio Transparency) 11. Using Voice command 12. Product Reset 13. Specifications 14. Troubleshooting 15. Certification 1. Safety and general information 1) Use a standard USB charging cable (included), with or without a charging adapter. (5V, over 1 A) Adapter not included. sound. 2) Lower the volume prior to listening to audio to prevent potential damage to eardrums caused by sudden loud 3) Listening to loud music for extended periods of time may cause hearing damage. 4) Do not store the device in places with a temperature higher than 113 / 45 . 5) This device is IPX4 sweat and water resistant. It is not waterproof. Please use caution not to oversaturate with moisture or leave excessive moisture on the device as this can damage to the internal components. In case the device gets wet, please contact our customer service for support. Visit our FAQ page for more information. 6) Do not attempt to disassemble, modify, or repair the device. 7) Do not cause shock to the device. 8) Keep out of the reach of children and pets. 9) Do not tug on cords or touch power plugs with wet hands. 10) Do not use the device near microwave ovens or wireless LAN adaptors. 11) When the product is not being used, please keep it in the Cradle. 12) When cleaning the device, use a clean dry cloth to wipe the device clean. Do not use solvents. 13) To clean the silicone eartips, remove from earphones, wash with warm water, dry completely and check for debris before reattaching. 14) Replacement ear tips can be purchased from PHIATON Customer Service. 15) Using the device while walking or driving may prevent the user from hearing important sounds such as signals or alarms and may impose hazardous conditions on yourself and/or others. Heed caution during use. 16) The radio waves on this device may affect electronic medical devices. If you use any electronic medical devices, consult your doctor or the medical device company before using. Use PHIATON BonoBuds only for its intended purposes. This device cannot be used for purposes related to human safety as it may cause radio interference during operation.
- 3 Sizes of Silicon Ear Tips (M Silicone tips come pre-attached.) 2. Package Contents 1) Package Contents
- BonoBuds Earbuds
- BonoBuds Charging Case
- USB - C Type Cable
- Quick Guide
- Warranty Card
- -Extend Warranty Card Charging Cable Eartips Warranty Card Extend Warranty Card BonoBuds Earbuds BonoBuds Charging Case Quick Guide 2) Components & Features Charging Case LED Earbuds LED Type-C Charging 3. Pairing When you take the earbuds out of the case, you can proceed with pairing. Remove the film on the earbuds and charge for at least 10 minutes before first time use. Turn the Bluetooth on of your device. When earbuds is taken out of the case, the earbuds are automatically turned on and ready for pairing after 5 seconds. to complete pairing. After searching for a device in Bluetooth Settings of the device to be connected, select PHIATON BonoBuds When the earbuds are connected to the device, voice guidance is provided. Device connected When you take the earbuds out of the case, they automatically connect to the most recently connected device. You need to repeat this procedure every time you pair PHIATON BonoBuds with a new device. The earbuds begin charging from the moment they are stored in the case. 4. Charging Case supports USB Type C charging 4-1. Charging the Earbuds Earbuds start charging when you put them in the case. The LED on the earbuds turns on and the earbuds are charging. When the earbuds are fully charged, the Earbuds Charging Status LED on the case turns off. 4-2. Charging the Case 1) Using the Charging cable Connect the Type-C charging cable to the port on the back of the case. Check that the Case Charging Status LED on the front of the case is on. A red LED means the earbuds can be charged less than once. The white LED means the earbuds can be charged more than once. When the case is fully charged, the charging status LED turns off. 4-3. Checking Battery Level 1) Check the earbuds battery level When the battery level is less than 10%, the earbuds red LED blinks twice every 5 seconds. When the remaining battery power is low, voice guidance is provided every 5 minutes. Battery is low 2) Check the case battery level When you open the case, you can check the charge level through the Case Charge Status LED. A red LED means the earbuds can be charged less than once. The white LED means the earbuds can be charged more than once. When the case battery is below 5%, the red LED blinks twice. 5. Power ON/OFF the earbuds 1) Turning on the earbuds When you take the earbuds out of the case, the earbuds turn on automatically. If first time connection or device with connection history is not nearby, it enters pairing mode after 5 seconds. If a device with connection history is nearby, the earbuds will be connected immediately when you take them out of the case.. When in pairing mode, the earbuds will turn off after 3 minutes if the Bluetooth has not been connected to. 2) Turning off the earbuds When you put the earbuds in the case, the earbuds automatically turn off. You can turn on/off the earbuds only when there is remaining battery power in the case. 3) Turn on/off earbuds manually. Press and hold the earbuds touch part for 5 seconds to turn on the power and provide voice guidance. Power On If you press the touch part again for 5 seconds, the power is turned off and voice guidance is provided. Power Off 6. Connecting/pairing with other Bluetooth devices With the earbuds in the case, simultaneously press the touch parts of both earbuds for 8 seconds. When the white LED of the earbuds lights up twice, the product is in the initialized state. When earbuds is taken out of the case, the earbuds are automatically turned on and ready for pairing after 5 seconds. to complete pairing. After searching for a device in Bluetooth Settings of the device to be connected, select PHIATON BonoBuds When the earbuds are connected to the device, voice guidance is provided. Device connected 7. Managing Music (play & control) You can control the 'music function' of the connected Bluetooth device by pressing the touch part of the left and right earbuds. 1) Play/stop music One tap the earbuds to play music from the Bluetooth device. One-tap the earbuds to stop the song if its playing. 2) How to use the change song function Double-tap the earbuds to skip to the next song. Triple-tap the earbuds to go back to the previous song. If you receive a call while using, tap the earbuds to answer and end the call. 8. Call Function 1) Answering a call Tap earbud twice to accept / end a call. 2) Ending a call When the call is over, double-tap the earbuds to end the call.
(In the case of a call received while listening to music, the music will automatically pause and will play again when the call ends.) You can also control the music directly from the Bluetooth Device Functions may vary depending on the paired Bluetooth device. Tap more firmly if controls do not operate properly. 9. Noise Cancelling Function 1) What is Noise Cancelling?
2) Turning Noise Cancelling Noise Cancelling refers to a technology that reduces noise from mid/low pitched sounds under 1kHz. When both earbuds L/R are removed from the case, the noise canceling function is activated automatically. When wearing one earbud, the noise canceling function does not work. 10. Ambient mode (Audio Transparency) Ambient mode Allowance is a function that allows you to hear ambient sounds without removing the earbuds from your ears while the noise canceling function is in operation. If you press and hold the touch part of the right earbud for 2 seconds, the noise canceling function stops and you can listen to external sounds. At this time, you will be guided by voice. Ambient mode If you press and hold the touch part of the right earbud for 2 seconds again, the external sound listening function is stopped and the noise canceling function is activated again. At this time, you will be guided by voice. Noise cancelling On 11. Activate the voice command function Activate the voice command function of the connected Bluetooth device by tapping the earbuds Press and hold the touch part of the left earbud for 2 seconds. After you hear a beep, release your hand to give voice commands. Functions may vary depending on the paired Bluetooth device.
12. Product Reset If an unknown problem occurs with the, most issues can be resolved by simply resetting the device. With the earbuds in the case, simultaneously press the touch parts of both earbuds for 8 seconds. When the white LED of the earbuds lights up twice, the product is in the initialized state. When earbuds is taken out of the case, the earbuds are automatically turned on and ready for pairing after 5 seconds. to complete pairing. After searching for a device in Bluetooth Settings of the device to be connected, select PHIATON BonoBuds When the earbuds are connected to the device, voice guidance is provided. Device connected All existing connection history will be reset. Communication Network Bluetooth Version 5.2 A2DP 1.3.2, HFP 1.8 , HSP 1.2 , AVRCP 1.6.2 Operating Frequencies 2.4GHz(2.402~2.480GHz) Earbuds : 100hrs / Charging Case : 5000hrs Full Charge Time Earbuds : 1.5hrs / Charging Case : 1.5hrs Earbuds Dimensions (L x W x H) 24 x 23.3 x 27.4mm / 0.95 x 0.92 x 1.08 inch Charging case Dimensions (L x W x H) 70.7 x 38.8 x 32.7mm / 2.79 x 1.53 x 1.29 inch Earbuds: 5.3g (0.012lb) / Charging Case: 35.1g (0.078lb) 13. Specifications Bluetooth Profiles Audio Codec Operating Range Music Play Standby Time Weight Driver Unit Sensitivity SBC, AAC Within 10m NC On 6 hrs 12.0 105 dB Earbuds Dimensions (L x W x H) 24.0mm 27.4mm m m 3
. 3 2 Charging case Dimensions (L x W x H) 70.7mm 32.7mm m m 8
. 8 3 The specifications are subject to change without prior notice for quality improvement. 14. Troubleshooting 1) The power does not turn on:
- Make sure the earbud protection film has been removed.
- Charge the device for at least 30 minutes.
- If the power does not turn on even after charging, contact PHIATON Customer Service. 2) The device does not charge:
- Make sure the earbud protection film has been removed.
- Check whether the USB charging cable has been properly connected with the device. Check whether the PC power is on and that it has been properly connected.
- When using a separately purchased USB AC adaptor, check to see that it has been properly connected. 3) The device does not pair:
Check whether the power of the Bluetooth device you want to connect is on.
- Check whether the Bluetooth feature within the Bluetooth device you want to connect is enabled
- Check whether the Bluetooth device you want to connect is within the supported range.
(Pairing is supported only within 3 feet)
- Check whether the Bluetooth profile within the Bluetooth device is compatible. 4) When there is no sound or music:
- Check whether the power of the device and the Bluetooth device is on
- Check whether music is being played within the connected Bluetooth device.
- Check whether the volume within the connected Bluetooth device is low. 5) When there is static noise or the sound cuts off:
- Check whether there is another electronic device nearby using the 2.4 GHz frequency band that is connected to the Bluetooth device
- Check whether the connected Bluetooth device is within the proper communication distance to the device.
(Maximum communication range: 33 feet) 6) The other party cannot be heard while on a call:
- Check if the power of the Bluetooth device you want to connect is on.
- Check whether the volume within the connected Bluetooth device is low 7) When noise canceling or ambient mode does not work:
- Please check if all earbuds L/R work by putting them in the case and taking them out again.
- When wearing one earbud, the noise canceling function does not work. 8) Product does not operate or operation has stopped:
- Please check if all earbuds L/R work by putting them in the case and taking them out again.
- If any of the above methods do not work, please reset the earbuds. 9) The device is paired with a PC/Laptop but does not work:
- PC/Laptops are equipped with various Bluetooth drivers depending on the manufacturer. It is possible that the PC/Laptop you are trying to connect is not compatible with PHIATON BonoBuds 15. Certification FCC Compliance Information FCC ID: V2R-TN0610 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment NOTE :
This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment dose cause harmful interference to radio or television reception. Which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (PF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. rate (SAR). Caution:
IC Compliance Information IC ID: 10488A-TN0610 This device complies with Industry Canadas license-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. Pour la clientle au Canada Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) L' appareil ne doit pas produire de brouillage;
(2) L' appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d' en compromettre le fonctionnement. TN0610 a t test et jug conforme aux limites dexposition aux rayonnements nonces pour un environnement non contrl et respecte les rgles dexposition aux frquences radiolectriques (RF) CNR-102 de lISDE. Hereby, PHIATON declares that this product is in compliance with the essential requirements and other relevant CE Compliance Information provisions of RE Directive 2014/53/EU 2011/65/EU.