Install Data Logger 1. Installation Steps Step 1Find the communication interface on the inverter and unscrew the protective cap Step 2Insert the data logger along the interface guide slot Step 3Tighten the fastening nut clockwise. 2. WIFI Network Configuration Smart Data Logger (WIFI) Quick Installation Guide Connect the data logger to the WIFI network according to the steps of ModelCSCU-ST-WF01/ CSCU-ST-WFP01 Part No: 91000273; Release Date: 2023/06
"Data Logger WIFI Network Configuration" in the APP User Guide. After the network connection is successful, the subsequent function Statement confirmation can be performed. Please read this guide carefully before using the product, and keep it in a place where maintenance personnel can easily find it. Due to product version upgrades or other reasons, the content of this document may be updated from time to time. Users should refer to the 3. Confirmation of Data Logger Status Confirm the status of the data logger through the indicator light Color Status Note Description actual product purchased and can download the latest version of the
Dark not powered on manual materials through the official website or sales channels. Unless data logger is not tightened or powered on otherwise agreed, this document is intended as a guide only. All Yellow Steady on for 5s power-on data logger is in a power on statements, information, and recommendations in this document do initialization initialization state not constitute a warranty of any kind, express or implied. Green Blinking1s on1s off normal communication with server and Without the written permission of the company, no entity or individual operation inverter is normal may extract, copy, or disseminate the contents of this document in any form. NOTE: Precautions for installing the data logger:
insert and remove the data logger after power is off. Yellow Blinking1s on1s off error state communication with the server is abnormal Blinking1s on1s off communication with the inverter error state is abnormal Red Steady on error state communication with the inverter and server is abnormal 4. Abnormal Status Handling If there is any abnormal platform data, please refer to the table below and complete simple troubleshooting based on the status of the LED lights. If the fault cannot be resolved or the indicator light fault status is not reflected in the table below, please contact after-sales service for assistance. NOTEUse the following table one minute after the WIFI network is This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must configured successfully be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. Color Status Note Quick Troubleshooting Yellow Blinking1s on1s off Check the WIFI connection status. If error state it cannot be solved, please contact the distributor. Red Blinking1s on1s off Check if the connection between the error state data logger and the photovoltaic equipment is normal. Steady on 1. Check if the connection between the data logger and the APP Guide error photovoltaic equipment is normal;
NOTEThe screenshot of the APP is for reference only. state 2. Check the WIFI connection status. Please refer to the actual interface. If it cannot be solved, please 1. Register & Log in contact the distributor. After entering the APP, please click the "Register" button to register the account. 5. Data Logger One-to-many Installation (only ScU-ST-WFP01 is supported) If you are a power station owner or end user, set the user type If you need to collect data on multiple inverters, connect them in daisy to individual. chain mode using an RS485 communication cable by referring to the If you are engaged in the photovoltaic industry dealers, equipment, Communication Connection section in the inverter user manual. operation and maintenance business, please select the user type as business. If you have any questions about the use or quality of our products, please contact us and provide the following information 2. Data Logger WIFI Network Configuration data logger model and serial number Connect the mobile phone to the target WIFI network in advance. On connected inverter model and serial number the login page, click on "More Tools" and select the "WIFI problem description Configuration" option. Follow the prompts to scan the data logger QR Please ensure that the data logger is of the WIFI router for network configuration. (Bluetooth needs to be working properly before leaving the site. If any abnormal conditions are found, please contact your distributor as soon as turned on for distribution phones) NOTEOnly supports 2.4GHz WIFI networks, not 5GH. code to enter the WIFI configuration page. Enter the account password possible APP User Guide APP Download Please scan the following QR code to download. 3Create the Power Station As shown in the following figure, click on "Monitoring" below to enter the monitoring page. Click on "+" in the upper right corner and fill in the information according to the prompts to start creating your photovoltaic power station. After You can also log in https://smartenergy.csisolar.com to use web version. creation, the monitoring page will display your power station information. 4. Add Data Logger After entering the power
"" icon in the upper right function page will pop up associated device and go device page. You can station, click on the corner, and a below. Select the to the associated manually enter the serial number of the data logger or scan the QR code of the serial number on the data logger to add it. The serial number is usually located on the packaging box of the device. If the packaging box has Part 15 B:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, been lost, you can also find the code on the data logger body. uses and can radiate radio frequency energy and, if not installed and 5. Check Information used in accordance with the instructions, may cause harmful After adding a data logger, you can view the data in your power station, interference to radio communications. However, there is no guarantee and click on the power station to view the details. If it is difficult to find that interference will not occur in a particular installation. If this the power station you need due to the large number of power stations, equipment does cause harmful interference to radio or television you can search in the upper right corner of the monitoring reception, which can be determined by turning the equipment off and column based on the name. on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. Part 15C This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference Contact Us CSI Solar Co., Ltd. 199 Lushan Road, SND, Suzhou, Jiangsu, China, 215129 Sales Inquiries Email: support@csisolar.com received, including interference that may cause undesired operation. RF exposure warning RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-
users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.