CURRENT TOUCH REMOTE CONTROL Programming Manual and User Guide Pair or Unpair A Remote Control 1. Initiate Learn Mode Pull down and release the TAU twice to enter learn mode. After the first tug, the drapery should start moving. The second tug should stop it. 2. Connect the Remote Remove the back plate or desktop backing from the remove by prying it off carefully with a screwdriver. Press and release the pairing button on the back of the remote. The LEDs on the front should begin to scroll. To Pair: Touch the top left of the top slider on horizontally oriented displays, and the top of the slider on the vertically oriented control. To Unpair: Touch the top right of the top slider on horizontally oriented displays, and the bottom of the slider on the vertically oriented display. The drapery will jog to confirm pairing has been successful. Fig. X Fig. X Fig. X Fig. X Fig. X Using the Multi-Channel Remote Control with a single drapery TOP SLIDER- A touch or a touch and glide moves the drapery to the position at which your finger rests. CHANNEL BUTTONS- A touch and release changes the remote to the desired channel. Using the Dual slider remote Control with a dual drapery TOP SLIDER- A touch or a touch and glide moves the blackout drapery to the position at which your finger rests. BOTTOM SLIDER- A touch or a touch and glide moves the sheer drapery to the position at which your finger rests. SAFETY INFORMATION CAUTION WARNING Read all warnings and instructions prior to installing the E-Wand. Failure to follow these instructions may result in property damage or serious personal injury. Do not use this product for anything other than its intended use. Any usage of the parts of this kit outside of its intended purposes in not covered under the warranty. Drapery parts may have sharp edges. Use gloves to prevent cuts or abrasions when-
ever removing or reinstalling drapery. CAUTION Statements FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by Current Products Co. could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. IC STATEMENT RF WARNING STATEMENT The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de license. Lexploitation est autorisee aux deux conditions suivantes: (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tour brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with the radiation exposure limits in an uncontrolled environment. This equipment is in direct contact with the user's body under certain operating conditions. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet quipment est conforme aux limites d'exposition aux radiations dans un environment non control. Cet quipment est en contact direct avec le corps de l'utilisateur dans des conditions de fonctionnement normals. Cet metteur ne doit pas tre co-localises ou oprant en conjonction avec tour autre antenne ou transmetteur. WARRANTY INFORMATION LIMITED WARRANTY Current Products Corp. (the Manufacturer) hereby warrants to Customer that the E-Wand (the Product) is and will remain for a period of one (1) year from the date of delivery to Customer as evidenced by Customers proof of purchase (the Warranty Period), free of defects in materials and workmanship, provided that the Product used for its intended purpose and is properly serviced in accordance with the Users Manual provided to Customer. Subject to the foregoing, if at any time during the Warranty Period the Product fails to conform to the foregoing warranty by reason of defects in materials or workmanship, Customer shall promptly notify Manufacturer in writing, and Manufacturer at its option shall repair or replace the defective Product or component part without charge to Customer, except for: (A) costs incurred in transporting the Products or component parts to and from Manufacturers designated dealer or its manufacturing plant; and (B) charges for labor or other costs incidental to the removal or remounting of component parts repaired or replaced under this Warranty, both of which shall be borne by Customer. Notwithstanding any provision herein to the contrary, this Warranty shall not extend or obligate Manufacturer to take any action with respect to: (i) Products which have been modified, altered, installed, used or operated in a manner which is not recommended by Manufacturer, including any Products in which parts not manufactured or approved by Manufacturer have been installed; (ii) Products which have not been regularly and properly serviced in accordance with the Users Manual or which have otherwise been neglected; and
(iii) ordinary wear and tear, service and maintenance and replacement items; (iv) the Product has been used, or attempted to be used, for other than the customary usage or for other than the Products intended use; (v) the Product has been subject to mishandling, misuse, or abuse; (vi) the product has suffered damage resulting from lightning, power surges, vandalism, fire, earthquake, acts of nature, or any other cause which the product was not designed to withstand; or (vii) damage to the Product cause by battery decay or corrosion. This Limited Warranty extends only to the original owner. This Limited Warranty is not transferable. This Limited Warranty does not cover normal wear or tear or deterioration which occurs with the passage of time. Batteries originally provided with a new product, if any, are produced by a third party and are not warranted by Manufacturer. No employee, distributor, dealer, agent or representative is authorized to change the terms of this Limited Warranty in any way, to extend the warranty time periods, or to grant additional warranties, and no attempt to do any of the foregoing will be binding upon Manufacturer. EXCEPT AS SPECIFICALLY STATED IN THE PARAGRAPHS IMMEDIATELY ABOVE, MANUFACTURER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF IMPLIED, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE WARRANTY SET FORTH ABOVE AND THE OBLIGATIONS AND LIABILITIES OF MANUFACTURER THEREUNDER REPRESENT CUSTOMERS SOLE AND EXCLUSIVE REMEDIES AND ARE EXPRESSLY MADE IN LIEU OF ANY AND ALL OTHER REMEDIES, WARRANTIES, GUARANTIES OR LIABILITIES, EXPRESS OR IMPLIED, ALL OF WHICH ARE HEREBY EXPRESSLY WAIVED BY CUSTOMER. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT SHALL MANUFACTURERS LIABILITY HEREUNDER EXCEED THE PURCHASE PRICE FOR THE PRODUCTS, NOR SHALL MANUFACTURER BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. LIMITATION OF LIABILITY OTHER LEGAL RIGHTS