User Guide FWS222 BBE PLUS 3D Portable 3D waterproof Bluetooth speaker Product included BBE PLUS USB Cable General features 5 6 1 2 3 4 7 8 1 Power on/off Hand-free call 2 3D mode indicator 3D 3D 3 3D mode on/off 3D 3D 4 Volume UP/DOWN Music UP/DOWN
- -
- -
5 Bluetooth indicator 6 Microphone 7 Smart phone stand 8 M4 Mounting thread M4 M4 9 DC5V Charging port DC5V DC5V 9 Power & Pairing Pairing
- LED (Flashing blue) Unpairing
-Double click Power on
-Press 2 sec BBE PLUS BBE PLUS Choose device Power off
-Press (2 sec) Smart stand for phone Opening groove Flip open Power charging Red LED (10% Low power) USB DC5V
<10%
Charge 100%
8 hours of average usage (50% Vol.) Hands-free MIC Extendable tubes Quick click 3D Virtual Surround Blue Extendable tubes ON Quick click to turn on
-Press 3D for multi-wider sound field OFF Press 3 sec to turn off
-Turn off 3D for normal audio listening Aluminum Manually extend tubes out for best sound performance Product Information English Dos and Don'ts 1. Please read the leaflet carefully. 2. Please pay attention to all the warnings. 3. Please follow the illustrations provided by the manufacturer for proper usage. 4. Please only use the correct accessory or part appointed by the manufacturer. 5. Please do not expose the device to excessive water or humid environments 6. Please do not place the device near an open fire source. 7. Please do not throw or physically abuse the device. 8. Please do not allow a child to use the device alone. Warning It is hazardous to execute some functions and/or operations not stated in this manual. Avoid exposing the speaker to overheated conditions. To prevent any damage, avoid putting the speaker near the cooler, around heaters, under direct sunshine or near water and humid environments. Advice Remove the device from the packaging carefully and preserve the packaging in good condition for limited warranty purposes and product RMA. Please avoid using the hand-free calling function in the state of charging. For your safety
- When moving the device after charging make sure the plug/s
(micro-usb or mains)has been properly unplugged.
- It is prohibited to unplug the plug by dragging the power cable.
- It is prohibited to operate the plug with the wet hands since this may lead to fire or electric shock.
- It is prohibited to disassemble the outer casing.
- If repairs are required, make sure it is serviced by certified technicians recommended by the manufacturer and/or certified agent. If not, your limited warranty could be null and void.
- It is prohibited to wring or squeeze the power cable. It is necessary to make sure the plug or the power cable to be replaced and/or maintained meet the requirements requested by the manufacturer.
- Unplug the device from the mains power during thunder and lighting conditions or when not in use for long periods .
- Different regions may require different power plugs and adapters due to varying regional voltage and safty requirements.
- Please remove the plug from the socket if the power is to be turned off completely. Warning: Just a reminder. Any alteration or revision without manufacturer's approval may lead to malfunction. Notice: It is hazardous to replace the battery cell in the speaker since this may cause explosion. Please dispose of the used battery cell and device properly according to the legal terms of the your regional requirements. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
The product comply with the US portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Radiation Exposure Statement:
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Dclaration d'exposition aux radiations:
Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada tablies pour un environnement non contrl. Le produit est sr pour un fonctionnement tel que dcrit dans ce manuel. La rduction aux expositions RF peut tre augmente si l'appareil peut tre conserv aussi loin que possible du corps de l'utilisateur ou que le dispositif est rgl sur la puissance de sortie la plus faible si une telle fonction est disponible. CAN ICES-3 (B)/NMB-3(B) The Regulations on Low-power Radio-frequency Electronic Devices (NCC) Article 12: Regarding the low-power radio-frequency electronic devices with the model qualification, any company, store or user may not do the followings willfully without permit: frequency altered, power amplified, or qualities and capacities designed originally changed. Article 14: The low-power radio-frequency electronic device (s) in use may not affect the flight safety and interfere with legal communications. The user shall stop using the device(s) immediately once the interference is identified and may not use it (them) unless the interference is unidentified due to improvement. The said legal communications refer to radio communications operated under the provisions prescribed by the Telecommunication Act. The low-power radio-frequency electronic devices are required to bear the interferences from legal communications, or from industrial, scientific and medical radio- frequency electronic devices. CAUTION Danger of Explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Recycling / Disposal The device may not be disposed as the waste unclassified. It is necessary to meet the domestic stipulations for recycling that require separate collection and treatment. Traditional Chinese 1. 2. 3. 4. 5. 6. 7. 8.
-
-
-
-
-
-
-
-
-
FCC B FCC 15 1. 2. 3. 4. / FCC 15 1. 2.
(NCC)
:
:
WEEE2002/96/EC Simplified Chinese 1. 2. 3. 4. 5. 6. 7. 8.
-
-
-
-
-
-
-
-
-
WEEE2002/96/EC Communication specifications Support Transmission distance Frequency Sound effect Output power SNR I PX Battery capacity Use ambient temperature BLUETOOTH V4.2 A2DP/SBC/AVCTP/
AVRCP/AVDTP/HFP 10m 2.4Ghz~2.48Ghz EQ/3D surrounding 2*3W 90dB IP54 1050mAh 0~45
/
Charge voltage / current usage time Product dimensions Product weight Certifications DC 5V1A 8hr(50Vol.) 43.5*117mm 150g CEFCCBSMINCC CCCSRRCRoHS 1 2 LED 3
//PDA/MIDBBE PLUS 4+-
+-
53D3D3D 3D3D 6 7 810%
95 105V 11 Communication specifications Support Transmission distance Frequency Sound effect Output power SNR I PX Battery capacity Use ambient temperature BLUETOOTH V4.2 A2DP/SBC/AVCTP/
AVRCP/AVDTP/HFP 10m 2.4Ghz~2.48Ghz EQ/3D surrounding 2*3W 90dB IP54 1050mAh 0~45
/
Charge voltage / current usage time Product dimensions Product weight Certifications DC 5V1A 8hr(50Vol.) 43.5*117mm 150g CEFCCBSMINCC CCCSRRCRoHS 1 2 LED 3
//PDA/MIDBBE PLUS 4+-
+-
53D3D3D 3D3D 6 7 810%
95 105V 11 Thank you for your purchase QR Code Please Contact us Email: service@opro9.com Model NO:FWS222 CCAF15LP1590TS R39366 FCC ID:XXXXX-XXXXXX CMIIT ID:XXXXXXXXXX