FCC ID: WAP2001 EZ-BLE PRoC Module

Getting Started With EZ-BLE PRoC Module AN96841 Authors: David Solda Associated Project: Refer to AN94020 Associated Part Family: CYBLE-022001-00 Related Application Notes: For a complete list of the application notes, click here. Software Version: PSoC Creator 3.1 SP2 and higher To get the latest version of this application no te, or the associated project file, please visit http://www.cypress.com/go/AN96841. AN96841 introduces you to the EZ-BLE PRoC Module, a fully qualified and certified Bluetooth Low Energy (BLE) module. The EZ-BLE PRoC Module is a complete BLE solution, integrating a BLE radio system, two crystals, chip antenna and passive components required for BLE operation. This application note helps you explore the EZ-BLE PRoC Module architecture and development tools and shows you how to create your first project using PSoC Creator, the development tool for the EZ-BLE PRoC Module. This application note also guides you to more resources to accelerate in-depth learning about the Cypress BLE module solution. Program the Device.................................................... 43 My First EZ-BLE PRoC Module Design Shortcut .... 44 Test Your Design........................................................ 46 Summary ......................................................................... 51 Related Application Notes ............................................... 51 Appendix A: EZ-BLE PRoC Module Features ................. 52 Appendix B: Cypress Terms of Art .................................. 53 Appendix C: Code Examples .......................................... 54 Worldwide Sales and Design Support ............................. 59 Contents Introduction ....................................................................... 2 More Information ............................................................... 2 EZ-BLE PRoC Module Overview ...................................... 3 EZ-BLE PRoC Module Mechanical Dimensions ........... 3 EZ-BLE PRoC Module Pinout and Functionality .......... 4 PRoC BLE Silicon Features ......................................... 7 Host Recommended PCB Layout ................................. 7 Bluetooth Low Energy Overview ....................................... 8 Development Tools ......................................................... 12 PSoC Creator Software .............................................. 12 Bluetooth Low Energy Component Software .............. 13 CySmart PC App ........................................................ 13 CySmart Mobile App .................................................. 14 Development Kits and Evaluation Boards ....................... 14 Learning Resources ........................................................ 21 EZ-BLE PRoC Module Datasheet .............................. 21 PRoC BLE Device Datasheet ..................................... 21 PRoC BLE Technical Reference Manual.................... 21 Learning PSoC Creator .............................................. 21 Application Notes ....................................................... 21 Design Guide .............................................................. 21 Technical Support ...................................................... 21 My First EZ-BLE PRoC Module Design ........................... 22 About the Design ........................................................ 22 Create the Design ...................................................... 23 Write the Application Code ......................................... 35 www.cypress.com Document No.: 001-96841 Rev. **

1 Introduction More Information Getting Started With EZ-BLE PRoC Module is an ultra-low-power Bluetooth Low Energy (BLE) the Bluetooth Special wireless standard defined by Interest Group short-range communication. It features a physical layer, protocol stack, and profile architecture, all designed and optimized for the lowest power consumption. BLE operates in the 2.4-GHz ISM band, with a data rate of 1 Mbps. low-power,

(SIG) for BLE is used in a wide range of applications. The use of BLE in these applications also varies widely in production volume, from very low- to high-volume end products. As such, fully qualified, certified, BLE modules have fast become the design preference. The use of modules removes consuming costly qualification/certification processes. time and The Cypress EZ-BLE PRoC Module is a fully integrated, qualified and certified, programmable system that integrates 32-kHz and 24-MHz crystal oscillators, passive components, on-board chip antenna, and Cypresss PRoC BLE chip (BLE radio, programmable analog and digital peripherals, memory, and an ARM Cortex-M0 microcontroller) on a small 10 mm 10 mm 1.8 mm module. The EZ-BLE PRoC Module enables a quick time-to-market and eliminates costly certification and qualification processes, offering an effective alternative to completing a BLE system design from ground up. In addition to reducing the cycle time, certification and qualification expenses, the programmable peripherals and GPIOs allow great flexibility using PSoC Creator IDE, the schematic-

based design tool for designing applications with EZ-BLE PRoC Module, and a speedy time to market. The BLE stack library is integrated with PSoC Creator and is free-of-cost. It can be easily configured using a simple graphical user interface, allowing you to jumpstart your BLE design in minutes. The EZ-BLE PRoC Module offers a best-in-class current consumption of 150 nA while retaining the SRAM contents and the ability to wake up from an interrupt. The EZ-BLE PRoC Module consumes only 60 nA while maintaining the wakeup capability in its nonretention power mode. The capacitive touch-sensing feature in the EZ-BLE Module, known as CapSense, offers an unprecedented signal-to-

noise ratio, best-in-class waterproofing, and a wide variety of sensor types such as buttons, sliders, and proximity sensors that are gaining increased popularity in wearable electronic devices such as activity monitors, health, and fitness equipment. If you are a first-time user of Cypresss PSoC or PRoC family of products, it is recommended that you read Appendix B for a list of commonly used terms. Cypress provides a wealth of data at www.cypress.com to help you accelerate learning on the EZ-BLE PRoC Module, as well as Cypresss PSoC and PRoC family of silicon devices. If you are a first-time user of Cypresss PSoC or PRoC family of products, it is recommended that you read Appendix B: Cypress Terms of Art for a list of commonly used terms. Following is an abbreviated list of resources for the EZ-BLE PRoC Module:

Datasheets: Describe and provide electrical specifications for the EZ-BLE PRoC Module. Application Notes and Code Examples: Covers a broad range of topics, from basic to advanced level. Many of the application notes include code examples. PSoC Creator provides additional code examples see Appendix C: Code Examples. Technical Reference Manuals (TRMs): Provide detailed descriptions of the architecture and registers in each PSoC 4 BLE device family. CapSense Design Guide: Learn how to design capacitive touch-sensing applications with the EZ-BLE PRoC Module. Development Tools CY8CKIT-042-BLE Bluetooth Low Energy (BLE) Pioneer Kit is an easy-to-use and inexpensive development platform for BLE. This kit includes connectors for Arduino compatible shields and the EZ-BLE PRoC Module Evaluation daughter board. CySmart BLE Host Emulation Tool for Windows, iOS, and Android is an easy-to-use GUI that enables you test and debug your BLE Peripheral applications. to See Development Kits and Evaluation Boards for an overview of available for the EZ-BLE PRoC Module. Technical Support Frequently Asked Questions (FAQs): Learn more about our BLE ecosystem BLE Forum: See if your question is already answered by fellow developers on the PSoC 4 BLE and PRoC BLE forums. Cypress support: Still no luck? Visit our support page and create a technical support case or contact a local sales representative. If you are in the United States, you can talk to our technical support team by calling our toll-free number: +1-

800-541-4736. Select option 8 at the prompt. www.cypress.com Document No.: 001-96841 Rev. **

2 Getting Started With EZ-BLE PRoC Module EZ-BLE PRoC Module Overview The EZ-BLE PRoC Module (CYBLE-022001-00) is an integrated, fully certified BLE solution, which allows for rapid development and deployment of your BLE-enabled product. This section will provide an outline of the mechanical structure of the EZ-BLE PRoC Module. This information is necessary for customers designing their own PCB layout for this module. The EZ-BLE PRoC Module ships with the necessary components required to achieve full BLE functionality. It includes:

PCB substrate: 10 mm 10 mm 0.5 mm Cypress PRoC BLE chip (refer to PRoC BLE Silicon Features for information on the Cypress BLE chip) Crystal oscillators 32.768 kHz watch crystal oscillator (WCO) 24.0 MHz internal main oscillator (IMO) Chip antenna Passives (resistor, capacitor, inductor) Metal RF Shield EZ-BLE PRoC Module Mechanical Dimensions Figure 1 shows a physical picture of the EZ-BLE PRoC module. Figure 1. EZ-BLE PRoC Module Top View (with and without Shield) and Side View For more details on the module dimensions, external component connections, and module placement recommendations, see the EZ-BLE PRoC Module datasheet specification. www.cypress.com Document No.: 001-96841 Rev. **

3 10.0 mmShield OutlineH = 1.10 mmChip Antenna0.5 mm1.3 mm10.0 mmShield Getting Started With EZ-BLE PRoC Module EZ-BLE PRoC Module Pinout and Functionality The EZ-BLE PRoC Module is designed to mount as a component on an end product PCB. Only a portion of the available I/O of the PRoC BLE silicon device are exposed on the CYBLE-022001-00 module in order to minimize the module footprint size. The EZ-BLE PRoC Module contains 21 connections on the bottom side of the module. Figure 2 and Figure 3 detail the bottom side connections available on the EZ-BLE PRoC Module. Figure 2. EZ-BLE PRoC Module Bottom View (Actual Unit - Seen Through Top) Pad 21 Pad 1 Figure 3. EZ-BLE PRoC Module Bottom View (Diagram - Seen Through Top) www.cypress.com Document No.: 001-96841 Rev. **

4 Getting Started With EZ-BLE PRoC Module The connection pad spacing is listed in Table 1. Table 1. EZ-BLE PRoC Module Connection Pad Spacing (Center-to-Center) Pad X Pad Y

(Pad X - Pad Y) Comments Pad Pitch Bottom-Left Corner 1 2 3 4 Top-Left Corner 6 7 8 9 10 11 12 13 14 15 16 Top-Right Corner 18 19 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 1.64 mm Distance from bottom left corner to Pad 1 center 0.76 mm Distance from Pad 1 center to Pad 2 center 0.76 mm Distance from Pad 2 center to Pad 3 center 0.76 mm Distance from Pad 3 center to Pad 4 center 0.76 mm Distance from Pad 4 center to Pad 5 center 0.81 mm Distance from top left corner to Pad 6 center 0.76 mm Distance from Pad 6 center to Pad 7 center 0.76 mm Distance from Pad 7 center to Pad 8 center 0.76 mm Distance from Pad 8 center to Pad 9 center 0.76 mm Distance from Pad 9 center to Pad 10 center 0.76 mm Distance from Pad 10 center to Pad 11 center 0.76 mm Distance from Pad 11 center to Pad 12 center 0.76 mm Distance from Pad 12 center to Pad 13 center 0.76 mm Distance from Pad 13 center to Pad 14 center 0.76 mm Distance from Pad 14 center to Pad 15 center 0.76 mm Distance from Pad 15 center to Pad 16 center 0.76 mm Distance from Pad 16 center to Pad 17 center 1.50 mm Distance from top right corner to Pad 18 center 0.76 mm Distance from Pad 18 center to Pad 19 center 0.76 mm Distance from Pad 19 center to Pad 20 center 0.76 mm Distance from Pad 20 center to Pad 21 center A list of the available I/Os and supported functionality for each I/O is shown in Table 2. Table 2. EZ-BLE PRoC Module Available Connections and Functionality Module Solder Pad Number Silicon Port Pin Functionality UART SPI I2C TCPWM CapSense WCO Out EXT_CLK/

ECO_OUT EXTPA_EN SWD GPIO 1 2 3 4 5 GND Ground Connection P4[1]

CTS MISO Yes Sensor/CTANK P5[1]

TX SCLK SCL Yes Sensor P5[0]

RX SS SDA Yes Sensor VDDR Radio Power Supply 1.9V to 5.5V Yes Yes Yes Yes Yes www.cypress.com Document No.: 001-96841 Rev. **

5 Module Solder Pad Number Silicon Port Pin Getting Started With EZ-BLE PRoC Module Functionality UART SPI I2C TCPWM CapSense WCO Out EXT_CLK/

ECO_OUT EXTPA_EN SWD GPIO 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 P1[6]

RTS SS Yes Sensor P0[7]

CTS SCLK Yes Sensor P0[4]

RX MOSI SDA Yes Sensor P0[5]

TX MISO SCL Yes Sensor GND Ground Connection P0[6]

RTS SS Yes Sensor P1[7]

CTS SCLK Yes Sensor VDD Digital Power Supply Input 1.71 to 5.5V XRES External Reset Hardware Connection Input P3[5]

P3[4]

P3[7]

TX RX SCL Yes Sensor SDA Yes Sensor CTS MISO Yes Sensor Yes P1[4]

RX MOSI SDA Yes P1[5]

TX MISO SCL Yes P3[6]

RTS Yes Sensor P4[0]

RTS MOSI Yes CMOD Yes Yes SWDCLK1 Yes Yes Yes SWDIO1 Yes Yes Yes Yes Yes Yes Yes Yes Yes 1 SDWCLK and SWDIO connections can be multiplexed as the functional options listed in each of the respective rows and can be used for programming without the need to reconfigure the device I/O. L o w P o w e r M o d e s EZ-BLE PRoC Module supports the following five power modes as illustrated in Figure 4:

Active mode: This is the primary mode of operation. In this mode, all peripherals are available. Sleep mode: In this mode, the CPU is in sleep mode, SRAM is in retention, and all the peripherals are available. Any interrupt wakes up the CPU and returns the system to Active mode. Deep-Sleep mode: In this mode, the high-frequency clock (IMO) and all high-speed peripherals are off. The WDT, LCD, I2C/SPI, link layer, and low-frequency clock (32-kHz ILO) are available. Interrupts from GPIO, WDT, or SCBs can cause a wakeup. The current consumption in this mode is 1.3 A for all PRoC BLE devices in the family. Hibernate mode: This power mode provides a best-in-class current consumption of 150 nA while retaining SRAM, programmable logic, and the ability to wake up from an interrupt generated by a GPIO. Stop mode: This power mode retains the GPIO states. Wakeup is possible by using the external reset (XRES) pin on the module. The current consumption in this mode is only 60 nA. www.cypress.com Document No.: 001-96841 Rev. **

6 Getting Started With EZ-BLE PRoC Module Figure 4: Power Modes Power Mode Current Consumption Code Execution Digital Peripherals Available Analog Peripherals Available Clock Sources Available Wake - Up Sources Wake - Up Time Active Sleep Deep - Sleep Hibernate Stop 2.2 mA @ 6 MHz 1.3 mA 1.3 uA 150 nA 60 nA Yes No No No No All All All All WDT, LCD, I 2 C/SPI, Link -

Layer No POR, BOD POR, BOD No No All All

-

Any interrupt source

-

0 WCO, 32 - kHz ILO No No GPIO, WDT, SCB 25 us GPIO XRES 2 ms 2 ms D e v i c e S e c u r i t y The EZ-BLE PRoC Module provides a number of options for the protection of flash memory from unauthorized access or copying. Each row of flash has a single protection bit; these bits are stored in a supervisory flash row. PRoC BLE Silicon Features The BLE device used on the EZ-BLE PRoC Module is the Cypress PRoC BLE. For additional details on this device, refer to the PRoC BLE device datasheet. Host Recommended PCB Layout The recommended host PCB layout pattern is shown in Figure 5. Dimensions shown are in mm. Figure 5. Host Board Recommended PCB Layout Pattern Note that the pad length shown includes overhang of the pad beyond the module outline. The pad length to the edge of the module is 0.71 mm. www.cypress.com Document No.: 001-96841 Rev. **

7 Getting Started With EZ-BLE PRoC Module Bluetooth Low Energy Overview The Bluetooth SIG defines Bluetooth 4.1, also known as Bluetooth Smart or Bluetooth Low Energy as the lowest-power wireless standard operating in the 2.4-GHz ISM band. Figure 6 summarizes the BLE protocol stack architecture. The following sections briefly describe the BLE stack layers. For a detailed architecture description, see the Bluetooth 4.1 specification or the training videos on the Bluetooth Developer website. If you are familiar with the Bluetooth BLE stack, you can skip these sections. Figure 10 shows the system design for a heart rate monitoring application. Figure 6. BLE Architecture P h ys i c a l L a ye r ( P H Y ) The physical layer transmits or receives the digital data at 1 Mbps using GFSK modulation in the 2.4-GHz ISM band. The BLE physical layer divides the ISM band into 40 RF channels with a channel spacing of 2 MHz, 37 of which are data channels and 3 are advertisement channels. L i n k L a ye r ( L L ) The link layer implements various key functionalities that make the BLE protocol robust and low-power. Some of these are the following:

Adaptive Frequency Hopping (AFH) to provide RF interference immunity 24-bit CRC and AES-128-bit encryption for robust and secure data exchange Advertising, scanning, creating and maintaining connections to establish a physical link Establishing fast connections and low duty cycle advertising for low-power operation H o s t C o n t r o l I n t e r f a c e ( H C I ) HCI is the interface between the host and the controller. This layer allows the host and the controller to exchange information such as command, data, and events over different transports. L o g i c a l L i n k C o n t r o l a n d Ad a p t a t i o n P r o t o c o l ( L 2 C A P ) to services upper-layer L2CAP provides protocol multiplexing, segmentation, and reassembly protocols. Segmentation and reassembly breaks the packet received from the upper layer into smaller packets that the link layer can transmit, and vice versa. The Bluetooth Low Energy L2CAP layer supports three protocol channel IDs for ATT, SM and L2CAP control. Bluetooth 4.1 allows direct data channels through L2CAP (connection-oriented channels) on top of these protocol channels. www.cypress.com Document No.: 001-96841 Rev. **

8 Physical Layer (PHY)Link Layer (LL)Host Control Interface (HCI)Logical Link Control and Adaption Protocol (L2CAP)Attribute Protocol (ATT)Security Manager (SM)Generic Attribute Profile (GATT)Generic Access Profile (GAP)Heart Rate ProfileBlood Pressure ProfileFind Me ProfileGlucose ProfileControllerHostApplications S e c u r i t y M a n a g e r ( S M ) The SM distribution to perform encryption and pairing. layer defines the methods used Pairing is the process to enable security features. In this process, two devices are authenticated, the link is encrypted, and then keys are exchanged. Bonding is the process in which the keys and identity information exchanged during the pairing process are saved within the paired devices. Bonded devices do not have to go through the pairing process again when reconnected. A t t r i b u t e P r o t o c o l ( A T T ) ATT forms the basis of the BLE communication. This protocol enables the client to find and access attributes on the server. An attribute is the fundamental data-carrying element in BLE, which consists of the following:

Attribute Handle: This is the 16-bit address assigned by the attribute server to allow its client to identify and access an attribute. Attribute Type: This specifies the type of data stored in an attribute. It is represented by a 128-bit number called a universally unique identifier (UUID). Bluetooth SIG defines the Bluetooth Base UUID, which is 128 bits long. In this base UUID, typically 16 bits (32 bits for Bluetooth 4.1) are used to identify an attribute type. The Bluetooth Base UUID is:

0x0000xxxx-0000-1000-8000-00805F9B34FB The 16-bit UUID of the Heart Rate Service (HRS) is 0x180D, so the complete 128-bit UUID for the HRS is 0x0000180D-0000-1000-8000-00805F9B34FB Attribute Value: This is the actual data stored in the attribute. Attribute Permission: This specifies whether an attribute can be read or written, and the security level required. Attribute permission is set by the higher layer specification and is not discoverable through the attribute protocol. Figure 7 shows the structure of an attribute with an example. Figure 7. Attribute Format and Example Getting Started With EZ-BLE PRoC Module for key Several types of attributes are defined by Bluetooth SIG;

some of which are as follows:

Service: The service attribute defines the function performed by the server. It is a collection of data entities called characteristics and can also include other services. A service can be of two types: primary service or secondary service. A primary service exposes the main functionality of the device while the secondary service provides additional functionality that a primary service encapsulates, but that is not required to be exposed. In a heart rate monitoring device example, HRS is a primary service and Battery Service (BAS) is a secondary service. Characteristic: The characteristic attribute exposes the data, and consists of an attribute that holds the value and a descriptor. Battery level is an example of a characteristic. Descriptor: The descriptor the characteristic declaration, and provides additional information about the characteristic. Representing the battery level in percentage values is an example of characteristic descriptor. is a part of Figure 8 shows the structure of a characteristic. Figure 8. Characteristic Format and Example Attribute Operations: These are accessed using the following five basic methods:

Read Request: Sent by the client to read an attribute value. For every request, the server sends a response to the client. Write Request: Sent by the client to write an attribute value. The sever responds to the client confirming whether the value is written. Write Command: Sent by the client to the server to write an attribute value. The server does not send any response for the write command. Notification: Sent by the server to the client to notify a new value or a change in value. The client does not send any response for a notification command. Indication: A type of notification from the server that is always confirmed by the client. www.cypress.com Document No.: 001-96841 Rev. **

9 Attribute HandleAttribute TypeAttribute ValueAttribute Permission2 bytes2 bytes0 to 512 bytesImplementation specific0x00030x2A00 (UUID for Device Name)Cypress HRMRead Only, No Authentication, No EncryptionExampleFormat<<Characteristic>>Value<<Descriptor>><<Descriptor>>Battery ServiceBattery LevelClient Characteristic Configuration DescriptorCharacteristic Presentation Format Figure 10 shows implemented in the peripheral. the services and characteristics G e n e r i c A t t r i b u t e P r o f i l e ( G A T T ) GATT defines the ways in which the attributes can be found and used. GATT operates in one of two roles:

GATT client: The device that requests the data. GATT server: The device that provides the data. Figure 9 shows the client-server architecture in the GATT layer. Figure 9. Client-Server Architectures Figure 10 shows an example in which a smartphone is configured as the GATT client (wants data) and a heart rate sensor that is configured as the GATT server (has data). G e n e r i c A c c e s s P r o f i l e ( G A P ) The GAP layer provides the device-specific information:

device address, device name, and how it can be discovered and connected. Profile: This specification defines how devices connect to each other to find and use services. It describes the type of application and general expected behavior of that device. Figure 10 shows an example of a Heart rate monitor Profile. Getting Started With EZ-BLE PRoC Module The GAP layer operates in one of four roles:

Broadcaster: This is a non-connectable advertising role that is used to broadcast its data, but cannot form BLE connections. A typical example of a GAP broadcaster is iBeacon. Observer: This is a listening role that scans for advertisements. It is capable of connections but cannot initiate one. A typical example of a GAP observer is a packet sniffer. Peripheral: This is a connectable advertising role that operates as a slave after a connection is established. For example, a heart-rate sensor reporting the measured heart-rate to a remote device operates as a GAP peripheral. Central: This role that scans is a GAP for advertisements and initiates connections. It operates as a master after a connection is established. For example, a mobile device retrieving the heart-rate measurement from a peripheral heart-rate sensor operates as a GAP central. Figure 10 shows an example where a smartphone in which the heart rate app operates as a GAP central and the heart-rate sensor operates as a GAP peripheral. www.cypress.com Document No.: 001-96841 Rev. **

10 ClientServerServiceChar.ServiceChar.ServiceChar.RequestsResponses Getting Started With EZ-BLE PRoC Module Figure 10. Bluetooth Low Energy System Example In Figure 10, the heart rate monitoring device operates as the GAP peripheral and implements the heart rate sensor profile, while the smartphone receiving the data operates as the GAP central and implements the heart rate collector profile. n this example, the heart rate sensor profile implements two standard services the heart rate service that comprises three characteristics (the Heart Rate Measurement Characteristic, the Body Sensor Location Characteristic, and the Heart Rate Control Point Characteristic) and the Device Information Service. At the link layer, heart rate measurement device is the slave and the smartphone is the master www.cypress.com Document No.: 001-96841 Rev. **

11 Development Tools Getting Started With EZ-BLE PRoC Module Cypress supports the EZ-BLE PRoC Module with high-quality software tools and development kits. They provide access to a suite of world-class Integrated Design Environments (IDEs). PSoC Creator is a single IDE to develop application code and then build, debug, and deploy an embedded design. Cypress provides the following software and hardware tools, to get started with a EZ-BLE PRoC Module based design:

1. PSoC Creator IDE 2. Bluetooth Low Energy Component (part of PSoC Creator) 3. CySmart PC application 4. CySmart Android app 5. CySmart iOS app 6. Bluetooth Low Energy Development Kit (CY8CKIT-042) 7. EZ-BLE PRoC EVAL Board (CYBLE-022001-EVAL) PSoC Creator Software PSoC Creator is a state-of-the-art, easy-to-use IDE. It offers a unique combination of hardware configuration and software development based on standard schematic entry, as Figure 11 shows. You can customize each Component using a configuration window. Every Component comes with a detailed Component datasheet. For EZ-BLE PRoC Module, you can use the initial designs in which the components are pre-configured and pre-populated. You can also develop applications in a drag-and-drop design environment using a library of pre-characterized, production-

ready Components. For details, see the PSoC Creator home page. Figure 11. PSoC Creator Schematic Entry and Components www.cypress.com Document No.: 001-96841 Rev. **

12 Getting Started With EZ-BLE PRoC Module Bluetooth Low Energy Component Software The Bluetooth Low Energy Component provides a comprehensive GUI-based configuration window that lets you quickly design applications that require BLE connectivity. The Component incorporates a Bluetooth Core Specification v4.1 compliant BLE protocol stack and provides API functions to enable user applications to interface with the underlying Bluetooth Low Energy Sub-System (BLESS) hardware via the stack. The Component supports the SIG-adopted GATT-based profiles and services as well as custom BLE profiles and services, and it allows various GAP and GATT roles to be configured. The Component generates the necessary code for a particular profile and service operation, as configured in the GUI, abstracting the underlying BLE stack and hardware configuration so that you can concentrate on the system design. The BLE Component also provides profile Application Programming Interfaces (APIs) to design BLE solutions without requiring manual stack-level manipulation. The exception to this is the L2CAP configuration specified in Bluetooth v4.1, which allows advanced users to configure the L2CAP layer of the stack if desired. Developing Bluetooth Low Energy Application involves four easy steps. For detailed information, refer to AN94020 Getting Started with PRoC BLE. CySmart PC App The Bluetooth Low Energy CySmart (Figure 12 ) is a Windows-based tool that provides a host emulation software platform for testing and debugging LE peripheral or sensor applications. The tool provides an easy-to-use graphical user interface (GUI) to enable customers to configure, test and debug their solutions. The tool is available as an independent software application and can be launched from the PSoC Creator IDE as shown in Figure 62. CySmart, along with a Cypress BLE dongle, acts as a master device. The tool supports the Bluetooth 4.1 specification and can connect to any Bluetooth 4.1 or 4.0 enabled BLE peripheral devices. Comprehensive test scenarios can be created by configuring the scan, connection and security parameters. The tool provides the ability to analyze advertisement data and scan response data, and explore the Generic Attribute Profile (GATT) database of peripheral device. For more information, refer to CySmart User Guide. Figure 12. CySmart Tool Window www.cypress.com Document No.: 001-96841 Rev. **

13 Getting Started With EZ-BLE PRoC Module CySmart Mobile App In addition to the PC application, you can download the CySmart mobile app for iOS or Android from the respective app stores. The apps use the iOS Core Bluetooth framework and Android built-in platform framework for BLE to configure your BLE-enabled mobile as a BLE central device that can scan and connect to BLE peripheral devices. Figure 13. CySmart Heart Rate Profile The mobile app supports Bluetooth SIG-adopted BLE standard profiles through an intuitive GUI and abstracts the underlying BLE and characteristic details. Development Kits and Evaluation Boards Cypress provides an easy-to-use development kit to help you prototype your EZ-BLE PRoC Module design. CY8CKIT-042 BLE Pioneer Kit The CY8CKIT-042 BLE Pioneer Kit shown in Figure 14 is an Arduino Uno-compliant BLE development kit for the PRoC BLE family of devices, including the CYBLE-022001-00 module. The CY8CKIT-042 BLE kit consists of pluggable BLE modules that connect to a baseboard. The Pioneer Kit is powered through the USB interface or with a coin cell battery. The Pioneer baseboard and RF module combination enables you to develop battery-operated low-power BLE designs that work in conjunction with standard Arduino shields and additional PSoC 4 BLE device capabilities such as the CapSense user interface on the Pioneer baseboard. The kit also contains a BLE USB dongle that acts as a BLE master and works with the CySmart application to provide a BLE master emulation platform on non BLEWindows systems. Cypress also provides an adapter board for the EZ-BLE PRoC Module to evaluate and develop with the Cypress module without the need to develop custom hardware. www.cypress.com Document No.: 001-96841 Rev. **

14 Getting Started With EZ-BLE PRoC Module Figure 14. BLE Pioneer Kit The kit includes of a set of BLE example projects and documentation that should help you get started with developing your own BLE applications. Visit www.cypress.com/go/CY8CKIT-042-BLE to get latest updates on the kit and to download kit design, example projects and documentation files. C Y B L E - 0 2 2 0 0 1 - E V AL E Z - B L E P R o C M o d u l e E v a l u a t i o n B o a r d The EZ-BLE PRoC Module Evaluation board (CYBLE-022001-EVAL) is a simple evaluation board designed to fan out the EZ-BLE PRoC Module (CYBLE-022001-00) connections to headers compatible with the CY8CKIT-042-BLE Pioneer Kit. The CYBLE-022001-EVAL board is used to evaluate the Cypress EZ-BLE PRoC Module without your having to design custom hardware to mount the Cypress EZ-BLE PRoC Module. Figure 15 shows the CYBLE-022001-EVAL connected to the CY8CKIT-042-BLE Kit. Figure 15. CYBLE-022001-EVAL (Left) Connected to CY8CKIT-042-BLE (Right) www.cypress.com Document No.: 001-96841 Rev. **

15 Getting Started With EZ-BLE PRoC Module The CYBLE-022001-EVAL board contains the following components:

Cypress EZ-BLE PRoC Module (CYBLE-022001-00) soldered directly to the Evaluation Board PCB substrate used for I/O fan out Connection headers Cmod capacitor (for use with Capacitive Sensing elements on the CY8CKIT-042-BLE kit) Inductors (power supply see the datasheet specification for recommended external components) This evaluation board is designed to simulate the placement and connection of the EZ-BLE PRoC Module in a final application. All host-side layout pattern recommendations (as shown in Figure 5) are followed in the evaluation board. Note that not all connections available on the CY8CKIT-042-BLE are populated on the CYBLE-022001-00/CYBLE-022001-

EVAL modules. This is due to the number of I/Os supported on the CYBLE-022001-00 module. When designing applications, PSoC Creator will only display connections that are available on the CYBLE-022001-00 module and CYBLE-022001-EVAL. The next page will describe in detail the connections of the CYBLE-022001-EVAL board and the corresponding connections on the CY8CKIT-042-BLE development kit. To place the CYBLE-022001-EVAL on the CY8CKIT-042-BLE baseboard, locate the 20-pin (J11) and 24-pin (J10) connection headers, as shown in Figure 16. Figure 16. CY8CKIT-042-BLE Baseboard with J10 and J11 Headers to Connect the CYBLE-022001-EVAL Plug the CYBLE-022001-EVAL module into the CY8CKIT-042-BLE baseboard on headers J10 and J11, while keeping the antenna directed outside. To remove the CYBLE-022001-EVAL evaluation board from the CY8CKIT-042-BLE baseboard, hold the CY8CKIT-042-BLE baseboard in one hand and the CYBLE-022001-EVAL in the other, as shown in Figure 17, and pull it out using a rocking motion. Figure 17. Removing the CYBLE-022001-EVAL from the CY8CKIT-042-BLE Baseboard www.cypress.com Document No.: 001-96841 Rev. **

16 Getting Started With EZ-BLE PRoC Module C Y B L E - 0 2 2 0 0 1 - E V AL C o n n e c t i o n s t o C Y 8 C K I T - 0 4 2 - B L E The CYBLE-022001-00 module contains 21 connections on the back side of the module. Each of these connections is present on the CYBLE-022001-EVAL evaluation board too. Figure 18 shows the CYBLE-022001-EVAL and highlights the elements on the top side of the board. Figure 18. CYBLE-022001-EVAL Board Top Side J5 Header The CYBLE-022001-EVAL also includes the following elements:

Cmod: A 2.2-nF capacitor mounted on the evaluation board used with the CY8CKIT-042-BLE capacitive sensing slider, buttons and proximity sensors. J3 Header: A two-pin header that exposes VDD and VDDR. J4 Header: A five-pin header that exposes connections used for programming the EZ-BLE PRoC Module Evaluation board by using the MiniProg3 kit, as shown in Figure 19. Figure 19. CYBLE-022001-EVAL Using CY8CKIT-002 MiniProg3 J5: A header that exposes P5[0] and P5[1], which can be used for I2C communication (including high speed I2C) to the EZ-BLE PRoC Module. www.cypress.com Document No.: 001-96841 Rev. **

17 Figure 20 reiterates the Port-Pin connections on the CYBLE-022001-EVAL board. A NC connection denotes No Connect, where no physical connection is present between the EZ-BLE PRoC Module and the CYBLE-022001-EVAL board. Figure 20. CYBLE-022001-EVAL Board Pinout Getting Started With EZ-BLE PRoC Module NC NC NC NC NC NC NC NC NC NC P0_6 P1_4 P0_7 P1_3 XRES P1_5 GND NC VDD NC GND VDD P3_6 P3_7 NC NC NC NC NC NC NC P5_1 NC P5_0 P3_4 P3_5 P0_5 P0_4 P1_7 P1_6 NC P4_1 VDDR GND As mentioned previously, the Port-Pin connections above do not completely match the CY8CKIT-042-BLE baseboard pin out. Seven such connections exist that do not align with the CY8CKIT-042-BLE baseboard (highlighted in red in Figure 20). Table 3 details all connections on the CY8CKIT-042-BLE baseboard and provides the equivalent Port-Pin connection on the CYBLE-022001-EVAL board. Table 3. CYBLE-022001-EVAL Port-Pin Connections to CY8CKIT-042-BLE Baseboard CY8CKIT-042-BLE Baseboard Connection Header CY8CKIT-042-BLE Baseboard Connection Port-Pin2 CYBLE-022001-EVAL Connection Port-Pin J11 J11 J11 J11 J11 J11 J11 J11 J11 J11 P0_0 P0_1 P0_2 P0_3 P0_4 P0_5 VREF P1_0 P1_1 P1_2 NC NC NC NC NC NC NC NC NC NC www.cypress.com Document No.: 001-96841 Rev. **

18 CY8CKIT-042-BLE Baseboard Connection Header CY8CKIT-042-BLE Baseboard Connection Port-Pin2 CYBLE-022001-EVAL Connection Port-Pin Getting Started With EZ-BLE PRoC Module J11 J11 J11 J11 J11 J11 J11 J11 J11 J11 J12 J10 J10 J10 J10 J10 J10 J10 J10 J10 J10 J10 J10 J10 J10 J10 J10 J10 J10 J10 J10 J10 J10 J10 P1_4 P0_6 P1_3 P0_7 P1_5 XRES P1_7 GND P1_6 VDD GND VDD P3_6 P3_7 P3_4 P3_5 P3_2 P3_3 P3_0 P3_1 P4_0 P5_1 P4_1 P5_0 P2_6 P2_7 P2_4 P2_5 P2_2 P2_3 P2_0 P2_1 VDDR GND P1_4 P0_6 P1_3 P0_7 P1_5 XRES NC GND NC VDD GND VDD P3_6 P3_7 NC NC NC NC NC NC NC P5_1 NC P5_0 P3_4 P3_5 P0_5 P0_4 P1_7 P1_6 NC P4_1 VDDR GND Note The port-pin list order is according on the CY8CKIT-042-BLE baseboard physical connection pinout. www.cypress.com Document No.: 001-96841 Rev. **

19 The connections shown in Table 3 apply to the Arduino compatible headers located on the CY8CKIT-042-BLE baseboard. Figure 21 shows the Arduino compatible headers located on the CY8CKIT-042-BLE baseboard. Figure 21. Arduino Compatible Headers on CY8CKIT-042-BLE Baseboard Getting Started With EZ-BLE PRoC Module Connections above are labeled according to the CY8CKIT-042-BLE baseboard pinout. For the equivalent and available connections used with the CYBLE-022001-EVAL board, refer to Table 3. For additional information, refer to the CY8CKIT-042-

BLE product webpage. www.cypress.com Document No.: 001-96841 Rev. **

20 Learning Resources Getting Started With EZ-BLE PRoC Module This section provides a list of EZ-BLE PRoC Module learning resources that can help you to get started and to develop complete applications with EZ-BLE PRoC Module. You can also use the Document Manager in PSoC Creator to view these resources. To open the Document Manager, choose the Help > Document Manager. EZ-BLE PRoC Module Datasheet EZ-BLE PRoC Module datasheet list the features, pinouts, device-level specifications and fixed functional peripheral electrical specifications of all EZ-BLE PRoC Module. PRoC BLE Device Datasheet PRoC BLE device datasheets list the features, pinouts, device-level specifications and fixed functional peripheral electrical specifications of all PRoC BLE devices. PRoC BLE Technical Reference Manual The PRoC BLE Technical Reference Manuals (TRM) describes all peripheral functionality in detail, with register-level descriptions. The document is divided into two parts, the Architecture TRM and the Register TRM. Learning PSoC Creator Visit the PSoC Creator home page to download the latest version of PSoC Creator. Support for the EZ-BLE PRoC Module is included with PSoC Creator 3.1 SP2 and newer versions. Launch PSoC Creator and navigate to the following items:

Simple Component example projects: Choose File > Open > Example projects. These example projects demonstrate how to configure and use PSoC Creator Components. System Reference Guide: Choose Help > System Reference > System Reference Guide. This guide lists and describes the system functions provided by PSoC Creator. Component datasheets: Right-click a Component and select Open Datasheet. In addition, you can get a list of all PRoC BLE Component datasheets. Application Notes Application notes assist you with understanding specific features of the device and designing your PSoC application. Visit the following page for a complete list of EZ-BLE PRoC Module application notes. Design Guide You can download the PSoC 4 CapSense Design Guide, which shows how to design capacitive touch-sensing applications with the PRoC BLE family of devices. Technical Support If you have any questions, our technical support team is happy to assist you. You can create a support request by visiting Cypress Technical Support If you are in the United States, you can talk to our technical support team by calling our toll-free number: +1-800-541-4736. You can also use the following support resources if you need quick assistance. Self-help Local sales office locations www.cypress.com Document No.: 001-96841 Rev. **

21 Getting Started With EZ-BLE PRoC Module My First EZ-BLE PRoC Module Design This section provides you with the step-by-step process for building a simple design with EZ-BLE PRoC Module using PSoC Creator. We will use a previous example project completed for the PRoC BLE device and reconfigure it to work with the EZ-

BLE PRoC Module. About the Design This design demonstrates the Find Me profile operation using the BLE Component in PSoC Creator. The example uses the

"Find Me" target profile and operates as a BLE server that can communicate to a BLE Client (Smart Phone or PC). It can operate with another device that uses the "Find Me" locator profile and acts as a BLE client. The "Find Me" target profile uses an instance of the "Immediate Alert Service" to display alerts when the locater device sends them. When in discovery mode, the Find Me Target remains visible for BLE clients. The device switches to Deep-Sleep mode between BLE connection intervals. For this design, the BLE configuration in Table 4 is used. Table 4. BLE Design Configuration Requirement Value GAP Role Profile Role GATT Role GAP Peripheral Device Find Me GATT Server Find Me Characteristic 8-bit Alert Level Bluetooth Low Energy Advertisement Timing Fast advertising interval of 20ms Go to low power mode on advertisement timeout Advertise with fast advertisement configuration for 30 seconds Advertisement Packet Appearance and Immediate Alert Service UUID in Advertisement packet Local name in Scan response packet Connection Parameters Slave latency = 0 Connection interval = 7.5 ms Supervisory timeout = 10 seconds Device name = Find Me Target GAP Settings Company ID of device address = 0x00A050 No authentication or encryption This design uses GPIOs for three LEDs to indicate different states, a button switch for wake-up from Deep Sleep, and a BLE subsystem to enable the Find Me profile through the BLE protocol. The schematic for the design from PSoC Creator is shown in Figure 22. www.cypress.com Document No.: 001-96841 Rev. **

22 Getting Started With EZ-BLE PRoC Module Figure 22. My First EZ-BLE PRoC Module Design Creating your first EZ-BLE PRoC Module design involves four main steps:

1. Create the design in the PSoC Creator schematic page. 2. Write the application code to initialize and handle Bluetooth Low Energy events and take action. 3. Program the EZ-BLE PRoC Module on the BLE Pioneer Kit. 4. Test your design using the CySmart PC application or mobile app. Figure 23. Creating a New Project Create the Design This section takes you on a step-by-step guided tour of the design process. It starts with creating an empty project and guides you through hardware and firmware design entry. You can skip this section if you simply wish to try the example project provided with this application note without going through the build process. 1. Install PSoC Creator 3.1 SP2 or higher on your PC from the webpage PSoC Creator home page. After installation, a registration page for Keil license will be shown. This can be ignored for EZ-BLE PRoC Module. 2. Start PSoC Creator, and choose File > New >

Project, as Figure 23 shows. www.cypress.com Document No.: 001-96841 Rev. **

23 3. Choose the project template PRoC BLE Design, and give the project a name such as My_First_Project, as shown in Figure 24. Choose an appropriate location for your new project. Figure 24. Naming the New Project and Device Selector Guide Location Getting Started With EZ-BLE PRoC Module 4. Once in the Device Selector Guide, scroll down and locate the CYBLE-022001-00 part number (Device Selector Guide location is shown in Figure 24). Figure 25. Device Selector Guide www.cypress.com Document No.: 001-96841 Rev. **

24 5. The EZ-BLE PRoC Module CYBLE-022001-00 is then shown in the Device location after selection from the Device Selector Guide. Click OK to start the project. Figure 26. Launching the Device Selector Getting Started With EZ-BLE PRoC Module 6. Creating a new project generates a project folder with a baseline set of files. You can view these files in the Workspace Explorer window, as shown in Figure 27. Open the project schematic file TopDesign.cysch by double-clicking it. Figure 27. Opening Top Design Schematic www.cypress.com Document No.: 001-96841 Rev. **

25 7. You can see pre-populated Components in the schematic as Figure 28 shows. Figure 28. Pre-populated Components Getting Started With EZ-BLE PRoC Module 8. Disable/enable the Components per your design. For this design, right-click on each of the components as follows and enable/disable components/features as Figure 29 shows:

Disable ADC_SAR_Seq_1 and ADC_In from the BATTERY MONITOR section In the GPIO BUTTONS section, disable all buttons except SW1 In the TIMER section, disable TCPWM_1, Clock_1, and ISR_1 Disable Capsense_1, from TOUCH PAD section. Disable SCB_1 and SCB_2 from the Serial Interfaces section (I2S_1 should already be disabled) Instead of disabling, deleting the unused Components is also possible. These components have an option of bringing back from Component Catalog if required. www.cypress.com Document No.: 001-96841 Rev. **

26 Getting Started With EZ-BLE PRoC Module Figure 29.Enable/Disable Components 9. After performing the actions in step 7, you will see the schematic as shown in Figure 22. 10. Add one more LED by selecting the following schematic and right-clicking Copy and Paste as shown in Figure 30. Figure 30 Adding One More LED 11. You can configure the Bluetooth Low Energy Component with the following properties by double-clicking on the Component as shown in Figure 31. GAP peripheral role with Find Me Target (GATT server) configuration as shown in Figure 31 Services and characteristics for Find Me profile are shown in Figure 32 and can be left to default values Limited advertisement mode with an advertising timeout of 30 seconds and fast advertisement interval of 20 to 30 ms as show in Figure 33 www.cypress.com Document No.: 001-96841 Rev. **

27 GAP Device Name set to Find Me Target and Appearance set to Generic Keyring as shown in Figure 36 GAP security set to least security configuration with no authentication or encryption as shown in Figure 37 Figure 31. Bluetooth Low Energy Component General Configuration Getting Started With EZ-BLE PRoC Module Figure 32. Bluetooth Low Energy Component Profiles Configuration www.cypress.com Document No.: 001-96841 Rev. **

28 Figure 33. Bluetooth Low Energy Component GAP Advertisement Settings Getting Started With EZ-BLE PRoC Module Figure 34. Bluetooth Low Energy Component GAP Advertisement Packet www.cypress.com Document No.: 001-96841 Rev. **

29 Figure 35. Bluetooth Low Energy Component GAP Scan Response Packet Getting Started With EZ-BLE PRoC Module Figure 36. Bluetooth Low Energy Component GAP General Settings Figure 37. Bluetooth Low Energy Component GAP Security Settings www.cypress.com Document No.: 001-96841 Rev. **

30 12. Double-click on LED1 and change the name to Advertising_LED for LED1 as shown in Figure 38. Similarly rename the other two LEDs as Disconnect_LED and Alert_LED. Configure the LED as Strong drive mode. Figure 38. Renaming a Pin Component Getting Started With EZ-BLE PRoC Module 13. Double-click on SW1 and change the name to Wakeup_SW. Configure the pin as interrupt as shown in Figure 39 and Figure 40. Figure 39. Digital Input Pin Configuration www.cypress.com Document No.: 001-96841 Rev. **

31 Getting Started With EZ-BLE PRoC Module Figure 40. Digital Input Pin Interrupt Configuration 14. Drag and drop an Interrupt Component from the Component Catalog. Change the name to Wakeup_Interrupt and wire it to the Wakeup_SW pins irq output as Figure 41 , Figure 42, and Figure 43 show. Figure 41. Location of the Interrupt Component www.cypress.com Document No.: 001-96841 Rev. **

32 Getting Started With EZ-BLE PRoC Module Figure 42. Renaming the Interrupt Component Figure 43 Wiring the Interrupt and Pin Component www.cypress.com Document No.: 001-96841 Rev. **

33 Getting Started With EZ-BLE PRoC Module 15. To assign pins to the LEDs and button, open the file My_First_Project.cydwr (Design-Wide Resource file) from Workspace Explorer and click the Pins tab. You can use this tab to select the device pins for the outputs

(Advertising_LED, Disconnect_LED, and Alert_LED) and Wakeup_SW for input as Figure 44 shows. The following pin assignment is made with respect to the CY8CKIT-042 BLE pioneer kit and the CYBLE-022001-EVAL board connections. The LEDs on the CY8CKIT-042 BLE baseboard are mapped to P3[6] (green), P3[7] (blue), and P2[6] (red) on the Pioneer kit baseboard. These baseboard connections correspond to connections P3[6] (green), P3[7] (blue), and P3[4] (red) of the CYBLE-022001-EVAL module. The LEDs are Active low. Wakeup_SW is mapped to P2[7] of the Pioneer Kit baseboard, which is P3[5] of the CYBLE-022001-EVAL module. Refer to CYBLE-022001-EVAL Connections to CY8CKIT-042-BLE for details on the EZ-BLE PRoC Module Evaluation board connections. Figure 44.Pin Selection 16. Select Generate Application from the Build menu. Notice in the Workspace Explorer window that PSoC Creator automatically generates source code files for the Bluetooth Low Energy, Clock, and Digital Output/Input Pin Components, as Figure 45 shows. Figure 45. Generated Source Files www.cypress.com Document No.: 001-96841 Rev. **

34 Getting Started With EZ-BLE PRoC Module Write the Application Code The main.c file in the workspace has a template for the main program function. The following main firmware blocks are required for designing any BLE standard profile applications using PSoC Creator:

System initialization Bluetooth Low Energy stack event handler Bluetooth Low Energy service-specific event handler Main loop and low power implementation This section discusses details of these blocks with respect to the design configured in the previous section. S ys t e m I n i t i a l i z a t i o n When the EZ-BLE PRoC Module is reset or wakes up from the hibernate mode, the firmware needs to perform initialization, which includes platform initialization, enabling global interrupts, and initializing/starting the BLE Component. Figure 46 shows the flowchart for system initialization. As a part of the BLE Component initialization, you must pass the event handler function that will be called to receive events from the BLE stack. The BLE stack event handler shown in Figure 49 is registered as part of the BLE initialization. If the BLE Component initializes successfully, the firmware registers the event handler that will be called to receive IAS events and switches control to the main loop thread. Figure 47 shows the firmware source code for system initialization. Figure 46. System Initialization Flowchart www.cypress.com Document No.: 001-96841 Rev. **

35 Reset Platform Initialization- BLE Init- Register Stack Event HandlerBLE-Init Success?Register IAS Event HandlerYError HandlingNSystem InitializationMain Processing Thread Getting Started With EZ-BLE PRoC Module Figure 47. System Initialization Firmware CYBLE_API_RESULT_T apiResult;

CYBLE_STATE_T bleState;

/* Enable Global Interrupts */

CyGlobalIntEnable;

/* Start the BLE component and register a stack callback routine */

apiResult = CyBle_Start(StackEventHandler);

if(apiResult != CYBLE_ERROR_OK)

{

/* BLE stack initialization failed, check your configuration */

}

/* Register service specific callback routine for IAS */

CyBle_IasRegisterAttrCallback(IasEventHandler);

CYASSERT(0);

B L E S t a c k E v e n t H a n d l e r The BLE stack within the BLE Component generates a list of events to provide the BLE interface status and data to the application firmware through the BLE stack event handler registered during the CyBle_Start API call. The event handler must handle basic events from the stack and configure the stack with the application information to successfully establish and maintain the BLE link. For the Find Me application that you are creating, the BLE stack event handler must process all the events described in Table 5. The flow chart and the firmware for handling the BLE stack events are shown in Figure 48 and Figure 49. Table 5. Bluetooth Low Energy Stack Events BLE Stack Event Name Event Description Event Handler Action CYBLE_EVT_STACK_ON Bluetooth Low Energy firmware stack within the BLE Component initialized successfully Start Advertisement and reflect advertisement state on the LEDs CYBLE_EVT_GAP_DEVICE_DISCONNECTED Bluetooth link disconnected from the peer device Low Energy CYBLE_EVT_GAP_DEVICE_CONNECTED Bluetooth established with the peer device Low Energy link is is Start re-advertisement and reflect advertisement state on the LEDs Update Energy link state on the LEDs the Bluetooth Low CYBLE_EVT_TIMEOUT Bluetooth Low Energy stack generic timeout event Configure the device in hibernate mode received an advertisement timeout event you if www.cypress.com Document No.: 001-96841 Rev. **

36 Figure 48. Bluetooth Low Energy Stack Event Handler Flow Chart Getting Started With EZ-BLE PRoC Module www.cypress.com Document No.: 001-96841 Rev. **

37 Stack ON or device disconnected?Start AdvertisingDevice connected?Retrieve Connection HandleNNYYReturn from stack event handlerB LE Stack Event HandlerAdvertising timeout?Go to HibernateYN Getting Started With EZ-BLE PRoC Module Figure 49. Bluetooth Low Energy Stack Event Handler Firmware

#define LED_ON (0u)

#define LED_OFF (1u) extern CYBLE_GAPP_DISC_PARAM_T cyBle_discoveryParam;

extern CYBLE_GAPP_DISC_MODE_INFO_T cyBle_discoveryModeInfo;

void StackEventHandler(uint32 event, void* eventParam)

{

switch(event)

{

case CYBLE_EVT_STACK_ON:

case CYBLE_EVT_GAP_DEVICE_DISCONNECTED:

/* Start BLE advertisement for 30 seconds and update link

* status on LEDs */

CyBle_GappStartAdvertisement();

Advertising_LED_Write(LED_ON);

Disconnect_LED_Write(LED_ON);

case CYBLE_EVT_GAP_DEVICE_CONNECTED:

/* BLE link is established */

Advertising_LED_Write(LED_OFF);

Disconnect_LED_Write(LED_OFF);

break;

Alert_LED_Write(LED_OFF) break;

case CYBLE_EVT_TIMEOUT:

if(*(uint8 *) eventParam == CYBLE_GAP_ADV_MODE_TO)

{

/* Advertisement event timed out, go to low power

* mode (Hibernate mode) and wait for an external

* user event to wake up the device again */

Advertising_LED_Write(LED_OFF);

Disconnect_LED_Write(LED_OFF);

Alert_LED_Write(LED_OFF);

Wakeup_SW_ClearInterrupt();

Wakeup_Interrupt_ClearPending();

Wakeup_Interrupt_Start();

CySysPmHibernate();

}

break;

default:

}

}

break;

www.cypress.com Document No.: 001-96841 Rev. **

38 Getting Started With EZ-BLE PRoC Module B l u e t o o t h L o w E n e r g y S e r v i c e S p e c i f i c E v e n t H a n d l e r The BLE Component also generates events corresponding to each of the services supported by your design through the service event handler that was registered in the initialization section of the code (IasEventHandler in this example). For the Find Me application that you are creating, the BLE Component will generate Immediate Alert Service (IAS) events that will let the application know if the Alert Level characteristic has been updated with a new value. Figure 50 and Figure 51 show the flow chart and firmware for handling BLE IAS events. Figure 50. Bluetooth Low Energy IAS Event Handler Flowchart Alert Level Updated Y Update the global variable alertLevel l r e d n a H t n e v E S A I Return from IAS Event Handler N www.cypress.com Document No.: 001-96841 Rev. **

39 Getting Started With EZ-BLE PRoC Module Figure 51. Bluetooth Low Energy IAS Event Handler Firmware

#define NO_ALERT (0u)

#define MILD_ALERT (1u)

#define HIGH_ALERT (2u)

#define BLINK_TIMEOUT (100u)

#define LED_NO_ALERT (200u)

#define LED_MILD_ALERT (100u)

#define LED_HIGH_ALERT (0u) uint8 alertLevel;

void IasEventHandler(uint32 event, void* eventParam)

{

/* Alert Level Characteristic write event */

if(event == CYBLE_EVT_IASS_WRITE_CHAR_CMD)

{

/* Data structure that is returned as eventParam */

CYBLE_IAS_CHAR_VALUE_T *charValue =

(CYBLE_IAS_CHAR_VALUE_T *)eventParam;

/* Extract Alert Level value from the data structure */

alertLevel = *((charValue->value->val));

}

}

M a i n L o o p a n d L o w P o w e r O p e r a t i o n The main loop firmware in your design must periodically service the BLE stack processing event and configure the BLESS block and the EZ-BLE PRoC Module system into the Low Power mode between connection intervals. Figure 52 and Figure 53 show the main loop flowchart and firmware. www.cypress.com Document No.: 001-96841 Rev. **

40 Getting Started With EZ-BLE PRoC Module Figure 52. Main Loop Flowchart Process BLE Events N Device Connected ?

Y Alert Level Updated Y N N Process the LED status n o i t a r e p O l a m r o N m e t s y S n o i t a r e p O BLE Idle ?

Y r e w o P w o L m e t s y S Go to deep sleep mode Configure wakeup pin

-

-

Go to Hibernate

-

Execute deep sleep wakeup sequence

-

Sleep till ECO stabilizes Figure 53. Firmware Main Loop for(;;)

{

/* Single API call to service all the BLE stack events. Must be

* called at least once in a BLE connection interval */

CyBle_ProcessEvents();

if(CYBLE_STATE_CONNECTED == CyBle_GetState())

{

static uint8 blinkTimeout = BLINK_TIMEOUT;

/* Update Alert LED status */

switch(alertLevel)

{

case NO_ALERT:

Alert_LED_Write(LED_OFF);

break;

www.cypress.com Document No.: 001-96841 Rev. **

41 Getting Started With EZ-BLE PRoC Module case MILD_ALERT:

if(--blinkTimeout == 0)

{

Alert_LED_Write(Alert_LED_Read() ^ 0x01);

blinkTimeout = BLINK_TIMEOUT;

}

break;

case HIGH_ALERT:

Alert_LED_Write(LED_ON);

break;

break;

default:

}

bleState = CyBle_GetState();

if(bleState != CYBLE_STATE_STOPPED &&

bleState != CYBLE_STATE_INITIALIZING)

{

/* Configure BLESS in DeepSleep mode */

CyBle_EnterLPM(CYBLE_BLESS_DEEPSLEEP);

/* Configure PRoC BLE system in sleep mode */

CySysPmSleep();

/* BLE link layer timing interrupt will wake up the system */

}

}

}

}

B u i l d i n g a n d G e n e r a t i n g H e x F i l e Compile and Build the project by choosing Build > Build My_First_Project as shown in Figure 54. Figure 54 Compiling the Project www.cypress.com Document No.: 001-96841 Rev. **

42 Program the Device This section shows how to program the device. If you are using a development kit with a built-in programmer, connect the kit board to your computer using the USB cable. For other kits, refer to the kit user guide. If you are developing on your own hardware, you need a hardware debugger, for example, a Cypress CY8CKIT-

002 MiniProg3. 1. Select the PSoC Creator menu item Debug > Select Debug Target, as Figure 55 shows. Figure 55. Selecting Debug Target Getting Started With EZ-BLE PRoC Module 3. Choose the Debug > Program to program the device with the project, as Figure 57 shows. Figure 57. Programming the Device 4. You can view the PSoC Creator status bar (lower-left corner of the window), as Figure 58 shows, the programming status on 2. In the Select Debug Target dialog box, click Port Acquire, and then click Connect, as Figure 56 shows. Click OK to close the dialog box. Figure 56. Connecting to a Device Figure 58. Programming Status www.cypress.com Document No.: 001-96841 Rev. **

43 Getting Started With EZ-BLE PRoC Module My First EZ-BLE PRoC Module Design Shortcut Download the example project from AN94020 Getting Started with PRoC BLE and follow these steps to quickly generate the example project described in the previous pages. 1. Download the AN94020.zip package from the AN94020 web page. 2. Extract the contents to a destination directory on your PC. 3. Locate My_First_Project.cywrk (PSoC Creator Workspace) and open it with PSoC Creator 3.1 SP2 or newer. 4. Right-click the project name and select Device Selector, as shown in Figure 59. Figure 59. Device Selector Option in the Example Project 5. Locate CYBLE-022001-00 from the Device Selector, as shown in Figure 25, and select OK. You will see that the part number associated with your project will change to display the CYBLE-022001-00 part number. 6. Double-click My_First_Project.cydwr in the Workspace Explorer, as shown in Figure 60. Figure 60. Selecting My_First_Project.cydwr www.cypress.com Document No.: 001-96841 Rev. **

44 7. When the pin assignment table is displayed, you will notice that two of the connections have been unassigned. This is due to the limited I/O supported on the EZ-BLE PRoC Module. Both Disconnect_LED and Wakeup_SW will be shown as unassigned. Getting Started With EZ-BLE PRoC Module 8. To complete the assignments, assign P3[4] to Disconnect_LED and P3[5] to Wakeup_SW. These connections can be determined through checking the CY8CKIT-042-BLE and CYBLE-022001-EVAL schematics. 9. Build the application as shown in Figure 54. 10. Program the CYBLE-022001-EVAL as shown in Figure 57. 11. Proceed to the next section to test your design. www.cypress.com Document No.: 001-96841 Rev. **

45 Getting Started With EZ-BLE PRoC Module Test Your Design This section describes how to test your BLE design using the CySmart PC application and BLE Pioneer Kit or BLE Pioneer Kit and mobile apps. The setup for testing your design using the BLE Pioneer Kit is shown in Figure 61. Figure 61. Pioneer Kit and CySmart Bluetooth Low Energy Setup BLE Connection With CySmart PC App Host PC Application CySmart BLE Host Emulator BLE Connection with CySmart iOS / Android App Host PC USB - UART BLE Central Device PRoC - Smart Module Power LED 3 . 3 V LDO USB Program /

Debug

( PSoC 5 LP ) U S B Status LED BLE Central Device EZ-BLE PRoC Module Peripheral Optionally power through USB Coin cell powered U s i n g t h e C yS m a r t P C a p p l i c a t i o n 1. Connect the BLE USB dongle to your Windows machine. Wait for the driver installation to complete. 2. Launch the CySmart PC application by right-clicking on BLE Component > Launch CySmart in the project as shown in Figure 62; it should automatically detect the BLE USB dongle. If not, click the Refresh button in the Select BLE Dongle Target window. Click Connect as shown in Figure 63. www.cypress.com Document No.: 001-96841 Rev. **

46 Getting Started With EZ-BLE PRoC Module Figure 62. Launching CySmart Application. Figure 63. CySmart BLE Dongle Selection 3. Select the Configure Master Settings menu item and restore the values to their default settings, as shown in Figure 64. www.cypress.com Document No.: 001-96841 Rev. **

47 Getting Started With EZ-BLE PRoC Module Figure 64. CySmart Master Settings Configuration 4. Press the reset or SW1 button on the BLE Pioneer Kit to start the BLE advertisements from your design. 5. In the CySmart application, click the Start Scan button. Your device (BLE Peripheral) name should appear in the Discovered devices list. 6. Click Stop Scan and then click Connect to establish a BLE connection between the CySmart tool and your device, as shown in Figure 65 . Figure 65. Connect with CySmart PC Application www.cypress.com Document No.: 001-96841 Rev. **

48 7. Once connected, discover all the attributes on your design from the CySmart application, as shown in Figure 66 Figure 66. Discover Attributes Getting Started With EZ-BLE PRoC Module 8. Select the Alert Level characteristic and write a value of 0, 1, or 2 to Alert Level characteristic under the IAS as Figure 67 shows. Observe that the state of the LED on your device change based on your Alert Level characteristic configuration. Figure 67. Alert Notification www.cypress.com Document No.: 001-96841 Rev. **

49 Getting Started With EZ-BLE PRoC Module U s i n g M o b i l e A p p s Similar to the CySmart PC application, you can use the CySmart iOS or Android app to establish a BLEconnection with your design and perform read or write operations on different BLEservice characteristics as follows. 1. Turn ON the Bluetooth on your iOS or Android device 2. Launch the CySmart application 3. Press the reset or SW1 button on the BLE Pioneer Kit to start the BLE advertisements from your design 4. Your device will automatically appear in the CySmart app scan screen. Select your device to establish a BLE connection 5. Select the Find Me profile from the carousel view 6. Select one of the Alert Level values in the Find Me profile screen and observe the state of the LED on your device change based on your selection. Figure 68 shows a step-by-step configuration screenshot of the CySmart mobile app. Figure 68. Testing with CySmart Mobile App www.cypress.com Document No.: 001-96841 Rev. **

50 Summary This application note explored the basics of BLE protocol and the EZ-BLE PRoC Module solution, architecture, and development tools. The EZ-BLE PRoC Module is a fully integrated BLE solution that allows rapid development and production release for customer applications. The core of the EZ-BLE PRoC Module is the PRoC BLE chip, a programmable embedded system-on-chip, integrating BLE radio, configurable analog and digital peripheral functions, memory, and an ARM Cortex-M0 microcontroller. The EZ-

BLE PRoC Module is an ideal fit for customers seeking a qualified and certified solution in a small form-factor. Related Application Notes AN91445 Antenna Design Guide AN94020 Getting Started with PRoC BLE AN91267 Getting Started with PSoC 4 BLE AN95089 PSoC 4/PRoC BLE Crystal Oscillator Selection and Tuning Techniques Getting Started With EZ-BLE PRoC Module About the Author Name:

Title:

David Solda (DSO) Business Unit Director Background:

David Solda has a BS in Computer Engineering, a BS in Mathematics, and an MBA from Santa Clara University, California. www.cypress.com Document No.: 001-96841 Rev. **

51 Getting Started With EZ-BLE PRoC Module Appendix A: EZ-BLE PRoC Module Features Table 6 summarizes the features and capabilities of the EZ-BLE PRoC Module from Cypress. Table 6. EZ-BLE PRoC Module Features and Capabilities Features Device Family CYBLE-022001-00 BLE Subsystem BLE radio and link-layer hardware blocks with BLE 4.1- compatible protocol stack CPU 24-MHz ARM Cortex-M0 CPU with single-cycle multiply Flash Memory SRAM GPIOs 128 KB 16 KB Up to 16 CapSense Up to 13 sensors CapSense Gestures Not Supported ADC Opamps Comparators 12-bit, 1 Msps SAR ADC with sequencer None None Current DACs One 7-bit, and one 8-bit Power Supply Range 1.9 V to 5.5 V Low-Power Modes Deep-Sleep mode at 1.3 A Hibernate mode at 150 nA Stop mode at 60 nA Serial Communication 2 independent serial communication blocks (SCBs) with programmable I2C, SPI, UART, or I2S Timer Counter Pulse-

Width Modulator

(TCPWM) 4 Universal Digital Blocks (UDBs) Additional Digital Peripherals (I2S, PWM) None None Clocks 3-MHz to 24-MHz IMO Power Supply Monitoring 32-kHz ILO Power-on reset (POR) Brown-out detection (BOD) Low-voltage detection (LVD) Module Size Package 10 mm 10 mm 1.80 mm SMT Module Integrated Crystal Oscillators 24-MHz ECO integrated on module 32-kHz WCO integrated on module Antenna Type Chip antenna (Johanson Technology Inc. part number 2450AT18B100) www.cypress.com Document No.: 001-96841 Rev. **

52 Getting Started With EZ-BLE PRoC Module Appendix B: Cypress Terms of Art This section lists the most commonly used terms that you might hear while working with Cypresss PSoC family of devices. PSoC PSoC is a programmable, embedded design platform that includes a CPU, such as the 32-bit ARM Cortex-M0, with both analog and digital programmable blocks. It accelerates embedded system design with reliable, easy-to-use solutions, such as touch sensing and enables low-power designs. PSoC 4 BLE A PSoC 4 IC with an integrated BLE radio that includes a royalty-free BLE protocol stack compatible with the Bluetooth 4.1 specification. PSoC Creator PSoC 3, PSoC 4, and PSoC 5LP Integrated Design Environment (IDE) software that installs on your PC and allows concurrent hardware and firmware design of PSoC systems, or hardware design followed by export to other popular IDEs. Components Free embedded ICs represented by an icon in PSoC Creator software. These are used to integrate multiple ICs and system interfaces into one PSoC Component that are inherently connected to the MCU via the main system bus. For example, the BLE Component creates Bluetooth Smart products in minutes. Similarly, you can use the Programmable Analog Components for sensors. Component Configuration Tools Simple graphical user interfaces in PSoC Creator that embedded in each Component. It is used to customize the Component parameters and is accessed by right-clicking a Component. PSoC Programmer PSoC Programmer is a flexible, integrated programming application for programming PSoC devices. PSoC Programmer is integrated with PSoC Creator to program PSoC 3, PSoC 4, PRoC, and PSoC 5LP designs. MiniProg3 A programming hardware for development purposes that is used to program PSoC devices on your custom board or PSoC development kits that do not support a built-in programmer. www.cypress.com Document No.: 001-96841 Rev. **

53 Appendix C: Code Examples PSoC Creator includes a large number of code example projects. These projects are available from the PSoC Creator Start Page, as Figure 69 shows. Example projects can speed up your design process by starting you off with a complete design, instead of a blank page. The example projects also show how PSoC Creator Components can be used for various applications. Code examples and datasheets are included, as Figure 70 shows. In the Find Example Project dialog shown in Figure 70, you have several options:

Filter for examples based on architecture or device family. For EZ-

BLE PRoC Module, use the PRoC BLE filter. Most of the PRoC BLE example projects can reconfigure to work with the EZ-BLE PRoC Module. Select from the menu of examples offered based on the Filter Options. There are more than 20 BLE example projects for you to get started, as shown in Figure 70. Review the datasheet for the selection (on the Documentation tab) Review the code example for the selection. You can copy and paste code from this window to your project, which can help speed up code development. Or create a new project (and a new workspace if needed) based on the selection. This can speed up your design process by starting you off with a complete basic design. You can then adapt that design to your application. Getting Started With EZ-BLE PRoC Module Figure 69. Code Examples in PSoC Creator Figure 70. Code Example Projects with Sample Code www.cypress.com Document No.: 001-96841 Rev. **

54 Appendix D: Regulatory information:

FCC:

FCC NOTICE:

Getting Started With EZ-BLE PRoC Module including from Johanson The device CYBLE-022001-00, technology, complies with Part 15 of the FCC Rules. The device meets the requirements for modular transmitter approval as detailed in FCC public Notice DA00-1407.transmitter Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. the antenna 2450AT18B100 CAUTION The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Cypress Semiconductor may void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help LABELING REQUIREMENTS The Original Equipment Manufacturer (OEM) must ensure that FCC labelling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Cypress Semiconductor FCC identifier for this product as well as the FCC Notice above. The FCC identifier is FCC ID: WAP2001. In any case the end product must be labeled exterior with "Contains FCC ID: WAP2001"

www.cypress.com Document No.: 001-96841 Rev. **

55 ANTENNA WARNING Getting Started With EZ-BLE PRoC Module This device is tested with a standard SMA connector and with the antennas listed below. When integrated in the OEMs product, these fixed antennas require installation preventing end-users from replacing them with non-approved antennas. Any antenna not in the following table must be tested to comply with FCC Section 15.203 for unique antenna connectors and Section 15.247 for emissions. Table 7: Antenna used in the module Manufacturer Part Number Frequency Band Antenna Type Gain 2450AT18B100 2.4 GHz Chip

+0.5 dBi Johanson Technologies RF EXPOSURE To comply with FCC RF Exposure requirements, the Original Equipment Manufacturer (OEM) must ensure to install the approved antenna in the previous. The preceding statement must be included as a CAUTION statement in manuals, for products operating with the approved antennas in the previous table, to alert users on FCC RF Exposure compliance. Any notification to the end user of installation or removal instructions about the integrated radio module is not allowed. The radiated output power of CYBLE-022001-00 with the chip antenna mounted (FCC ID:

WAP2001) is far below the FCC radio frequency exposure limits. Nevertheless, use CYBLE-

022001-00 in such a manner that minimizes the potential for human contact during normal operation. End users may not be provided with the module installation instructions. OEM integrators and end users must be provided with transmitter operating conditions for satisfying RF exposure compliance. INDUSTRY CANADA CERTIFICATION CYBLE-022001-00 is licensed to meet the regulatory requirements of Industry Canada (IC), License: IC: 7922A-2001 Manufacturers of mobile, fixed or portable devices incorporating this module are advised to clarify any regulatory questions and ensure compliance for SAR and/or RF exposure limits. Users can obtain Canadian information on RF exposure and compliance from www.ic.gc.ca. This device has been designed to operate with the antennas listed in table 7 above, having a maximum gain of 0.5 dBi. Antennas not included in this list or having a gain greater than 0.5 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. The www.cypress.com Document No.: 001-96841 Rev. **

56 Getting Started With EZ-BLE PRoC Module antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC NOTICE The device CYBLE-022001-00 including the antenna 2450AT18B100 from Johanson technology, complies with Canada RSS-GEN Rules. The device meets the requirements for modular transmitter approval as detailed in RSS-GEN. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. LABELING REQUIREMENTS The Original Equipment Manufacturer (OEM) must ensure that IC labelling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Cypress Semiconductor IC identifier for this product as well as the IC Notice above. The IC identifier is 7922A-2001. In any case, the end product must be labeled in its exterior with

"Contains IC: 7922A-2001"

EUROPEAN R&TTE DECLARATION OF CONFORMITY Hereby, Cypress Semiconductor declares that the Bluetooth module CYBLE-022001-00 complies with the essential requirements and other relevant provisions of Directive 1999/5/EC. As a result of the conformity assessment procedure described in Annex III of the Directive 1999/5/EC, the end-customer equipment should be labeled as follows:

All versions of the CYBLE-022001-00 in the specified reference design can be used in the following countries: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, The Netherlands, the United Kingdom, Switzerland, and Norway. www.cypress.com Document No.: 001-96841 Rev. **

57 Getting Started With EZ-BLE PRoC Module Document History Document Title: AN96841 Getting Started With EZ-BLE PRoC Module Document Number: 001-96841 Revision ECN Orig. of Change Submission Date Description of Change

**

4715534 DSO 04/08/2015 New application note www.cypress.com Document No.: 001-96841 Rev. **

58 Getting Started With EZ-BLE PRoC Module Worldwide Sales and Design Support Cypress maintains a worldwide network of offices, solution centers, manufacturers representatives, and distributors. To find the office closest to you, visit us at Cypress Locations. Products PSoC Solutions Automotive cypress.com/go/automotive psoc.cypress.com/solutions Clocks & Buffers cypress.com/go/clocks PSoC 1 | PSoC 3 | PSoC 4 | PSoC 5LP Interface cypress.com/go/interface Lighting & Power Control Memory PSoC cypress.com/go/powerpsoc cypress.com/go/plc cypress.com/go/memory cypress.com/go/psoc Touch Sensing cypress.com/go/touch USB Controllers cypress.com/go/usb Wireless/RF cypress.com/go/wireless Cypress Developer Community Community | Forums | Blogs | Video | Training Technical Support cypress.com/go/support CapSense and PSoC are registered trademarks and PSOC Creator and SmartSense are trademarks of Cypress Semiconductor Corp. All other trademarks or registered trademarks referenced herein are the property of their respective owners. Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 Phone Fax Website

: 408-943-2600

: 408-943-4730

: www.cypress.com Cypress Semiconductor Corporation, 2015. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical Components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. This Source Code (software and/or firmware) is owned by Cypress Semiconductor Corporation (Cypress) and is protected by and subject to worldwide patent protection (United States and foreign), United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress. Disclaimer: CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical Components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Use may be limited by and subject to the applicable Cypress software license agreement. www.cypress.com Document No.: 001-96841 Rev. **

59