FCC ID: 2AODN-T3 3-in-1 Wireless Charging Station

A B

3-in-1 wireless charging station

* Only use certied 18W 9V/2A adapter C D E IMPORTANT SAFETY INSTRUCTIONS Before Using the unit, please read the user manual carefully

* Do not store device in high-temperature environment, including heat caused by intense sunlight or other forms of heat. Do not place device in re or other excessively hot environments. Exposure to re or temperature above 212F (100C) may cause explosion.

* Do not use the wireless charger in excess of its output rating. Overloading outputs above rating may result in a risk of re or injury to persons.

* Do not expose the wireless charger to rain or snow.

* Do not modify, repair or disassemble the unity, if so, please contact the manufacturer. Switch o the wireless charger when not in use. The wireless charger will automatically switch o when disconnected from its wall charger. FCC Statement FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna. 3-in-1 wireless charging station

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

FCC ID: 2AODN-T3 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference r eceived, including interference that may caus e undesired operation.

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date: Jan. 13, 2020 TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commission s Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2AODN-T3 T3 For the product stated above, we request that the following information be held confidential;

Model name Long-Term Short-Term Confidentiality Short-Term Confidentiality Days Confidentiality Exhibits External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name:

Company: CYSPO Technology (Shenzhen) Co., Ltd. Address:

Xiaoping Li Floor 2, Building A, Jin Chi Industry Park, Jiu Wei, Baoan District , Shenzhen, Guangdong, China

+86 755-23919516

+86 755-23919516 tech@icyspo.com Phone:

Fax:

E-Mail:

Floor 2, Building A, Jin Chi Industry Park, Jiu Wei, Baoan District , Shenzhen, Guangdong, China CYSPO Technology (Shenzhen) Co., Ltd. Tel: +86 755-23919516 Fax: +86 755-23919516 Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 1/17/2020 To whom it may concern:

We, CYSPO Technology (Shenzhen) Co., Ltd. the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AODN-T3 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name:

Company: CYSPO Technology (Shenzhen) Co., Ltd. Address:

Floor 2, Building A, Jin Chi Industry Park, Jiu Wei, Baoan District , Shenzhen, Guangdong, China

+86 755-23919516

+86 755-23919516 tech@icyspo.com Xiaoping Li Phone:

Fax:

E-Mail: