FCC ID: KA2AP2310A1 802.11n 2.4GHz Wireless AP

 

AirPremier N Access Point Table of Contents Table of Contents Product Overview ........................................................ 4 Package Contents ................................................... 4 System Requirements ............................................. 4 Introduction .............................................................. 5 Features .................................................................. 7 Wireless Basics ........................................................... 8 Standards-Based Technology ................................. 9 Wireless Installation Considerations ...................... 10 Hardware Overview ............................................... 11 Four Operational Modes ........................................... 13 Getting Started ...........................................................14

%QPIWTCVKQP .............................................................15 Save and Activate Settings .................................... 16 Basic Settings ........................................................ 17 Wireless .......................................................... 17 Access Point mode ...................................... 17 WDS with AP mode ..................................... 19 WDS mode ................................................... 21 Wireless Client mode ................................... 23 Open System/Shared Key Authentication ... 24 WPA/WPA2-Personal Authentication ........... 25 WPA/WPA2-Enterprise Authentication ........ 26 802.1x Authentication ................................... 27 LAN ................................................................. 28 Advanced Settings ................................................. 29 Performance .................................................... 29 Multi-SSID ........................................................ 31 VLAN ............................................................... 33 VLAN List ..................................................... 33 Port List ........................................................ 34 Add/Edit VLAN ............................................. 35 PVID Setting ................................................. 36 Intrusion ........................................................... 37 Schedule .......................................................... 38 QoS .................................................................. 39 AP Array .......................................................... 41 Wireless Basic Settings ................................ 42 Wireless Advanced Settings ........................ 42 Multiple SSID & VLAN .................................. 43 Advanced Functions ..................................... 43 Administration Settings ................................ 43

#425RQQPI2TGXGPVKQP ................................ 44 DHCP Server .................................................. 45 Dynamic Pool Settings ................................. 45 Static Pool Setting ........................................ 47 Current IP Mapping List ............................... 49 Filters ............................................................... 50 Wireless MAC ACL ...................................... 50 WLAN Partition ............................................. 51 Status ................................................................... 52 D-Link DAP-2310 User Manual 2 Networking Basics .................................................... 72 Check your IP address .......................................... 72 Statically Assign an IP address ............................. 73 6GEJPKECN5RGEKECVKQPU........................................... 74 Table of Contents Device Information ........................................... 52 Client Information ............................................. 53 WDS Information ............................................. 54 Stats ................................................................. 55 Ethernet ........................................................ 55 9.#06TCHE ................................................ 56 Log ................................................................... 57 View Log ...................................................... 57 Log Settings ................................................. 58 Maintenance ......................................................... 59 Administration Settings .................................... 59 Limit Administrator ....................................... 60 System Name Settings ................................. 61 Login Settings .............................................. 62 Console Settings .......................................... 63 SNMP Settings ............................................. 64

(KTOYCTGCPF55.%GTVKECVKQP7RNQCF ................ 65

%QPIWTCVKQP(KNG7RNQCF ...................................... 66 Time and Date ....................................................... 67 System ............................................................. 68 System Settings ........................................... 68 Help ....................................................................... 69 Troubleshooting ........................................................ 70 D-Link DAP-2310 User Manual 3 Section 1 - Product Overview Product Overview Package Contents

&.KPM&#2AirPremier N Access Point

2QYGT#FCRVGT

%#6'VJGTPGV%CDNG

%&41/YKVJ7UGT/CPWCN

+PUVCNN)WKFG Note: Using a power supply with a different voltage rating than the one included with the DAP-2310 will cause damage and void the warranty for this product. System Requirements

%QORWVGTUYKVJ9KPFQYU, Macintosh, or Linux-based operating systems with an installed Ethernet Adapter

(QTEQPIWTCVKQPVJGHQNNQYKPIYGDDTQYUGTUCTGUWRRQTVGF

/KETQUQHV Internet Explorer 6.0 and higher

/Q\KNNC(KTGHQZCPFJKIJGT

)QQING Chrome 2.0 and higher

#RRNG5CHCTKCPFJKIJGT

D-Link DAP-2310 User Manual 4 Section 1 - Product Overview Introduction 6JG&#2P#2KPETGCUGURTQFWEVKXKV[D[CNNQYKPI[QWVQYQTMHCUVGTCPFOQTGGHEKGPVN[9KVJVJG&#2

DCPFYKFVJKPVGPUKXGCRRNKECVKQPUNKMGITCRJKEUQTOWNVKOGFKCYKNNDGPGVUKIPKECPVN[DGECWUGNCTIGNGUCTGPQY

able to move across the network quickly. 6JG&#2KUECRCDNGQHQRGTCVKPIKPQPGQHHQWTFKHHGTGPVYKTGNGUUPGVYQTMKPIOQFGUCEEGUURQKPV9&5

9KTGNGUU

Distribution System) with AP, WDS, or Wireless Client mode.

#PKFGCNUQNWVKQPHQTSWKEMN[ETGCVKPICPFGZVGPFKPICYKTGNGUUNQECNCTGCPGVYQTM

9.#0KPQHEGUQTQVJGTYQTMRNCEGU

VTCFGUJQYUCPFURGEKCNGXGPVUVJG&#2RTQXKFGUFCVCVTCPUHGTTCVGUWRVQ/DRU

6JGPUVCPFCTF

is backwards compatible with 802.11g and 802.11b devices.) 92#92#KUQHHGTGFKPVYQQRVKQPU'PVGTRTKUG

WUGFHQTEQTRQTCVKQPUCPF2GTUQPCN

WUGFHQTJQOGWUGTU

WPA-Personal and WPA2-Personal are directed towards home users who do not have the server-based equipment TGSWKTGFHQTWUGTCWVJGPVKECVKQP6JKUOGVJQFQHCWVJGPVKECVKQPKUUKOKNCTVQ9'2DGECWUG[QWFGPGC2TG5JCTGF

-G[QPVJGYKTGNGUUTQWVGT#21PEGVJGRTGUJCTGFMG[KUEQPTOGFCPFUCVKUGFCVDQVJVJGENKGPVCPFCEEGUURQKPV

CEEGUUKUVJGPITCPVGF6JGGPET[RVKQPOGVJQFWUGFKUTGHGTTGFVQCUVJG6GORQTCN-G[+PVGITKV[2TQVQEQN

6-+2YJKEJ

offers per-packet dynamic hashing. It also includes an integrity checking feature which ensures that the packets were not tampered with during wireless transmission. WPA-Enterprise and WPA2-Enterprise are ideal for businesses that already have existing security infrastructures GUVCDNKUJGF/CPCIGOGPVCPFUGEWTKV[KORNGOGPVCVKQPECPPQYDGEGPVTCNK\GFQPCUGTXGTRCTVKEKRCVKPIQPVJGPGVYQTM

7VKNK\KPI:YKVJC4#&+75

4GOQVG#WVJGPVKECVKQP&KCNKP7UGT5GTXKEGUGTXGTCPGVYQTMCFOKPKUVTCVQTECP

D-Link DAP-2310 User Manual 5 Section 1 - Product Overview FGPGCNKUVQHCWVJQTK\GFWUGTUYJQECPCEEGUUVJGYKTGNGUU.#09JGPCVVGORVKPIVQCEEGUUCYKTGNGUU.#0YKVJ

92#'PVGTRTKUGEQPIWTGFVJGPGYENKGPVYKNNDGTGSWGUVGFVQGPVGTCWUGTPCOGYKVJCRCUUYQTF+HVJGPGYENKGPVKU

CWVJQTK\GFD[VJGCFOKPKUVTCVKQPCPFGPVGTUVJGEQTTGEVWUGTPCOGCPFRCUUYQTFVJGPCEEGUUKUITCPVGF+PVJGECUG

where an employee leaves the company, the network administrator is able to remove the previous employee from the CWVJQTK\GFNKUVVQCXQKFEQORTQOKUKPIVJGPGVYQTM

'#2

'ZVGPUKDNG#WVJGPVKECVKQP2TQVQEQNKUCXCKNCDNGVJTQWIJVJG9KPFQYU:2QRGTCVKPIU[UVGO;QWYKNNPGGFVQ

WUGVJGUCOGV[RGQH'#2RTQVQEQNQPCNNFGXKEGUKP[QWTPGVYQTMYJGPWUKPIVJG:HGCVWTG

/CZKOWOYKTGNGUUUKIPCNTCVGFGTKXGFHTQO+'''5VCPFCTFPCPFIURGEKECVKQPU#EVWCNFCVCVJTQWIJRWVOC[XCT[0GVYQTM

EQPFKVKQPUCPFGPXKTQPOGPVCNHCEVQTUKPENWFKPIXQNWOGQHPGVYQTMVTCHEDWKNFKPIOCVGTKCNUCPFEQPUVTWEVKQPCPFPGVYQTMQXGTJGCFECP

lower actual data throughout rate. D-Link DAP-2310 User Manual 6 Section 1 - Product Overview Features Four different operation modes - Capable of operating in one of four different operation modes to meet your YKTGNGUUPGVYQTMKPIPGGFU#EEGUU2QKPV9&5YKVJ#29&5QT9KTGNGUU%NKGPV

 Faster wireless networking with the 802.11n standard to provide a maximum wireless signal rate of up to 300 Mbps*.

 Compatible with the 802.11b standard to provide a wireless data rate of up to 11Mbps, allowing you to migrate

[QWTU[UVGOVQVJGPCPFIUVCPFCTFUQP[QWTQYPUEJGFWNGYKVJQWVUCETKEKPIEQPPGEVKXKV[

 %QORCVKDNGYKVJVJGIUVCPFCTFVQRTQXKFGCYKTGNGUUFCVCTCVGQHWRVQ/DRUKPVJG)*\HTGSWGPE[

range.

 Better security with WPA - 6JG&#2ECPUGEWTGN[EQPPGEVYKTGNGUUENKGPVUQPVJGPGVYQTMWUKPI92#

9K(K

Protected Access) to provide a much higher level of security for your data and communications than its previous versions.

 AP Manager II management software - The real-time display of the network's topology and APs information OCMGUPGVYQTMEQPIWTCVKQPCPFOCPCIGOGPVSWKEMCPFUKORNG

 SNMP for management - The DAP-2310 is not just fast, but also supports SNMP v.3 for better network OCPCIGOGPV5WRGTKQTYKTGNGUU#2OCPCIGTUQHVYCTGKUDWPFNGFYKVJVJG&#2HQTPGVYQTMEQPIWTCVKQP

CPF TOYCTG WRITCFG 5[UVGOU CFOKPKUVTCVQTU ECP CNUQ UGV WR VJG &#2 GCUKN[ YKVJ VJG 9GDDCUGF

EQPIWTCVKQP # &.KPM &8KGY  OQFWNG YKNN DG FQYPNQCFCDNG HQT PGVYQTM CFOKPKUVTCVKQP CPF TGCNVKOG

PGVYQTMVTCHEOQPKVQTKPIYKVJ&.KPM&8KGYUQHVYCTG

 7VKNK\GU1(&/VGEJPQNQI[

1TVJQIQPCN(TGSWGPE[&KXKUKQP/WNVKRNGZKPI

 Supports one 10/100/1000M Ethernet port.

 1RGTCVGUKPVJG`)*\HTGSWGPE[TCPIGU

 9GDDCUGFKPVGTHCEGHQTOCPCIKPICPFEQPIWTKPI

/CZKOWOYKTGNGUUUKIPCNTCVGFGTKXGFHTQO+'''5VCPFCTFPCPFIURGEKECVKQPU#EVWCNFCVCVJTQWIJRWVOC[XCT[0GVYQTMEQPFKVKQPUCPFGPXKTQPOGPVCN

HCEVQTUKPENWFKPIXQNWOGQHPGVYQTMVTCHEDWKNFKPIOCVGTKCNUCPFEQPUVTWEVKQPCPFPGVYQTMQXGTJGCFECPNQYGTCEVWCNFCVCVJTQWIJQWVTCVG

D-Link DAP-2310 User Manual 7 Section 2 - Installation Wireless Basics D-Link wireless products are based on industry standards to provide high-speed wireless connectivity that is easy to use within your home, business or public access wireless networks. D-Link wireless products provides you with access to the data you want, whenever and wherever you want it. Enjoy the freedom that wireless networking can bring to you. 9.#0WUGKUPQVQPN[KPETGCUKPIKPDQVJJQOGCPFQHEGGPXKTQPOGPVUDWVKPRWDNKECTGCUCUYGNNUWEJCUCKTRQTVU

EQHHGGUJQRUCPFWPKXGTUKVKGU+PPQXCVKXGYC[UVQWVKNK\G9.#0VGEJPQNQI[CTGCNNQYKPIRGQRNGVQYQTMCPFEQOOWPKECVG

OQTGGHEKGPVN[+PETGCUGFOQDKNKV[CPFVJGCDUGPEGQHECDNKPICPFQVJGTV[RGUQHZGFKPHTCUVTWEVWTGJCXGRTQXGPVQ

DGDGPGEKCNVQOCP[WUGTU

Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards, allowing wireless users to use the same applications as those used on a wired network. 2GQRNGWUG9.#0VGEJPQNQI[HQTOCP[FKHHGTGPVRWTRQUGU

Mobility - productivity increases when people can have access to data in any location within the operating range QHVJGKT9.#0/CPCIGOGPVFGEKUKQPUDCUGFQPTGCNVKOGKPHQTOCVKQPECPUKIPKECPVN[KORTQXGVJGGHEKGPE[

of a worker. Low implementation costs - WLANs are easy to set up, manage, change and relocate. Networks that frequently EJCPIGECPDGPGVHTQO9.#0 UGCUGQHKORNGOGPVCVKQP9.#0UECPQRGTCVGKPNQECVKQPUYJGTGKPUVCNNCVKQPQH

wiring may be impractical. Installation and network expansion - by avoiding the complications of troublesome cables, a WLAN system can be fast and easy during installation, especially since it can eliminate the need to pull cable through walls CPFEGKNKPIU9KTGNGUUVGEJPQNQI[RTQXKFGUOQTGXGTUCVKNKV[D[GZVGPFKPIVJGPGVYQTMDG[QPFVJGJQOGQTQHEG

Inexpensive solution - wireless network devices are as competitively priced as conventional Ethernet network FGXKEGU6JG&#2UCXGUOQPG[D[RTQXKFKPIWUGTUYKVJOWNVKHWPEVKQPCNKV[EQPIWTCDNGKPHQWTFKHHGTGPV

modes. Scalability %QPIWTCVKQPUECPDGGCUKN[EJCPIGFCPFTCPIGHTQO2GGTVQ2GGTPGVYQTMUUWKVCDNGHQTCUOCNN

number of users to larger Infrastructure networks to accommodate hundreds or thousands of users, depending on the number of wireless devices deployed. D-Link DAP-2310 User Manual 8 Section 2 - Installation Standards-Based Technology 6JG&#29KTGNGUU#EEGUU2QKPVWVKNK\GUVJGDICPFPUVCPFCTFU

The IEEE 802.11n standard is an extension of the 802.11b and 802.11g standards that came before it. It increases VJGOCZKOWOYKTGNGUUUKIPCNTCVGWRVQ/DRUYKVJKPVJG)*\DCPFUWVKNK\KPI1(&/VGEJPQNQI[

6JKUOGCPUVJCVKPOQUVGPXKTQPOGPVUYKVJKPVJGURGEKGFTCPIGQHVJKUFGXKEG[QWYKNNDGCDNGVQVTCPUHGTNCTIGNGU

SWKEMN[QTGXGPYCVEJCOQXKGKP/2')HQTOCVQXGT[QWTPGVYQTMYKVJQWVPQVKEGCDNGFGNC[U6JKUVGEJPQNQI[YQTMU

D[VTCPUOKVVKPIJKIJURGGFFKIKVCNFCVCQXGTCTCFKQYCXGWVKNK\KPI1(&/

1TVJQIQPCN(TGSWGPE[&KXKUKQP/WNVKRNGZKPI

technology. OFDM works by splitting the radio signal into multiple smaller sub-signals that are then simultaneously VTCPUOKVVGFCVFKHHGTGPVHTGSWGPEKGUVQVJGTGEGKXGT1(&/TGFWEGUVJGCOQWPVQHETQUUVCNM

KPVGTHGTGPEGKPUKIPCN

transmissions. The D-Link DAP-2310 will automatically sense the best possible connection speed to ensure the greatest possible speed and range. IEEE 802.11n offers the most advanced network security features available today, including WPA.

/CZKOWOYKTGNGUUUKIPCNTCVGFGTKXGFHTQO+'''5VCPFCTFPCPFIURGEKECVKQPU#EVWCNFCVCVJTQWIJRWVOC[XCT[0GVYQTMEQPFKVKQPUCPFGPXKTQPOGPVCNHCEVQTUKPENWFKPIXQNWOGQHPGVYQTM

VTCHEDWKNFKPIOCVGTKCNUCPFEQPUVTWEVKQPCPFPGVYQTMQXGTJGCFECPNQYGTCEVWCNFCVCVJTQWIJQWVTCVG

D-Link DAP-2310 User Manual 9 Section 2 - Installation Wireless Installation Considerations The D-Link AirPremier N wireless access point lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical TCPIGUXCT[FGRGPFKPIQPVJGV[RGUQHOCVGTKCNUCPFDCEMITQWPF4(

TCFKQHTGSWGPE[PQKUGKP[QWTJQOGQTDWUKPGUU

6JGMG[VQOCZKOK\KPIYKTGNGUUTCPIGKUVQHQNNQYVJGUGDCUKEIWKFGNKPGU

1. Keep the number of walls and ceilings between the access point and other network devices to a minimum.

'CEJYCNNQTEGKNKPIECPTGFWEG[QWTCFCRVGTUTCPIGHTQOHGGV

OGVGTU2QUKVKQP[QWTFGXKEGU

UQVJCVVJGPWODGTQHYCNNUQTEGKNKPIUKUOKPKOK\GF

2$G CYCTG QH VJG FKTGEV NKPG DGVYGGP PGVYQTM FGXKEGU # YCNN VJCV KU  HGGV VJKEM

 OGVGTU CV C

FGITGGCPINGCRRGCTUVQDGCNOQUVHGGV

OGVGTVJKEM#VCFGITGGCPINGKVNQQMUQXGTHGGV

OGVGTUVJKEM2QUKVKQPFGXKEGUUQVJCVVJGUKIPCNYKNNVTCXGNUVTCKIJVVJTQWIJCYCNNQTEGKNKPI

KPUVGCF

of at an angle) for better reception. 3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on the range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, YCVGT

UJVCPMUOKTTQTUNGECDKPGVUDTKEMCPFEQPETGVGYKNNFGITCFG[QWTYKTGNGUUUKIPCN

4-GGR[QWTRTQFWEVCYC[

CVNGCUVHGGVQTOGVGTUHTQOGNGEVTKECNFGXKEGUQTCRRNKCPEGUVJCV

generate RF noise. 5+H[QWCTGWUKPI)*\EQTFNGUURJQPGUQT:

YKTGNGUURTQFWEVUUWEJCUEGKNKPIHCPUNKIJVUCPF

home security systems), your wireless connection may degrade dramatically or drop completely. Make UWTG[QWT)*\RJQPGDCUGKUCUHCTCYC[HTQO[QWTYKTGNGUUFGXKEGUCURQUUKDNG6JGDCUGVTCPUOKVU

a signal even if the phone in not in use. D-Link DAP-2310 User Manual 10 Section 2 - Installation Hardware Overview Power Receptacle The supplied power adapter connects here. Power LED This light will be solid green when the unit is powered on. Reset Button A pinhole button located beside the Ethernet socket is used to reset the system or restore the factory default settings. Note: After resetting the unit, you will still be able to access the data on your hard drives. WLAN LED 6JKUNKIJVYKNNDGKEMGTKPIITGGPYJGPVJG)*\HTGSWGPE[KUKP

use. LAN LED 6JKUNKIJVYKNNDGKEMGTKPIITGGPYJGPVJGTGKUCEVKXG.#0VTCHE

LAN Port An Ethernet port that connects the unit to a network. D-Link DAP-2310 User Manual 11 Section 2 - Installation Four Operational Modes

#EEGUU2QKPV

#2 Create a wireless LAN WDS with AP WDS Wireless Client Wirelessly connect multiple networks while still functioning as a wireless AP Wirelessly connect multiple networks AP acts as a wireless network adapter for your Ethernet-

enabled device D-Link DAP-2310 User Manual 12 Section 2 - Installation Getting Started

;QWYKNNPGGFDTQCFDCPF+PVGTPGVCEEGUU

2. Consult with your cable or DSL provider for proper installation of the modem.

%QPPGEVVJGECDNGQT&5.OQFGOVQCTQWVGT5GGVJGRTKPVGF+PUVCNN)WKFGKPENWFGFYKVJ[QWTTQWVGT

4. If you are connecting a desktop computer to your network, install a wireless PCI adapter into an available PCI slot on your desktop computer. 5. Install the drivers for your wireless CardBus adapter into a laptop computer. D-Link DAP-2310 User Manual 13 5GEVKQP%QPIWTCVKQP

%QPIWTCVKQP 6QEQPIWTGVJG&#2WUGCEQORWVGTVJCVKUEQPPGEVGFVQVJG&#2YKVJCP'VJGTPGVECDNG

UGGVJGNetwork Layout diagram). Launch your web browser. 6[RGVJG+2CFFTGUUQHVJG&#2KPVJGCFFTGUUGNF

http://192.168.0.50) and press Enter. Make sure that the IP addresses of the DAP-2310 and your computer are in the same subnet. Note: If you have changed the default IP address assigned to the DAP-2310, make sure to enter the correct IP address.

'PVGTVJGWUGTPCOG

adminCPF[QWTRCUUYQTF.GCXGVJGRCUUYQTFGNFDNCPMD[FGHCWNVCPFENKEMLogin. Note: If you have changed the password, make sure to enter the correct password. D-Link DAP-2310 User Manual 14 5GEVKQP%QPIWTCVKQP

#HVGTUWEEGUUHWNN[NQIIKPIKPVQVJG&#2VJGHQNNQYKPIUETGGPYKNNCRRGCT

Save and Activate Settings 9JGPOCMKPIEJCPIGUQPOQUVQHVJGEQPIWTCVKQPUETGGPUKPVJKUUGEVKQPWUGVJG

GCEJUETGGPVQUCXG

PQVCEVKXCVG[QWTEQPIWTCVKQPEJCPIGU

DWVVQPCVVJGDQVVQOQH

;QWOC[EJCPIGUGVVKPIUVQOWNVKRNGRCIGUDGHQTGCEVKXCVKPI1PEG[QWCTGPKUJGFENKEMVJG%QPIWTCVKQP button located at the top of the page and then click Save and Activate. D-Link DAP-2310 User Manual 15 5GEVKQP%QPIWTCVKQP Basic Settings Wireless Access Point mode Wireless Band: Select 2.4GHz from the drop-down menu. Mode:

Select Access Point from the drop-down menu. The other three choices are WDS with AP, WDS, and Wireless Client. Network Name

(SSID):

5GTXKEG 5GV +FGPVKHKGT

55+& KU VJG PCOG

FGUKIPCVGF HQT C URGEKE YKTGNGUU NQECN CTGC

PGVYQTM

9.#0 6JG 55+&U HCEVQT[ FGHCWNV

setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. The SSID can be up to 32 characters and is case-sensitive. SSID Visibility:

Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID across the network, thus making it visible to all network users. Auto Channel Selection:

Enabling this feature automatically selects the channel that provides the best wireless performance. Enable is set by default. The channel selection process only occurs when the AP is booting up. Channel:

#NNFGXKEGUQPVJGPGVYQTMOWUVUJCTGVJGUCOGEJCPPGN6QEJCPIGVJGEJCPPGNTUVVQIINGVJG#WVQ%JCPPGN5GNGEVKQP

setting to Disable, and then use the drop-down menu to make the desired selection. Note: The wireless adapters will automatically scan and match the wireless settings. D-Link DAP-2310 User Manual 16 5GEVKQP%QPIWTCVKQP Channel Width:

Allows you to select the channel width you would like to operate in. Select 20 MHz if you are not using any 802.11n wireless clients. Auto 20/40 MHz allows you to connect to both 802.11n and 802.11b/g wireless devices on your network. Authentication:

Use the drop-down menu to choose Open System, Shared Key, WPA-Personal, WPA-Enterprise, or 802.11x. Select Open System to communicate the key across the network. Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is enabled, this option is not available. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. Select WPA-Enterprise to secure your network with the inclusion of a RADIUS server. Select 802.1x to secure your network using 802.1x authentication. D-Link DAP-2310 User Manual 17 5GEVKQP%QPIWTCVKQP WDS with AP mode In WDS with AP mode, the DAP-2310 wirelessly connects multiple networks while still functioning as a wireless AP. Wireless Band:

Select 2.4GHz from the drop-down menu. Mode:

WDS with AP mode is selected from the drop-down menu. Network Name

(SSID):

5GTXKEG5GV+FGPVKGT

55+&KUVJGPCOGFGUKIPCVGF

HQTCURGEKEYKTGNGUUNQECNCTGCPGVYQTM

9.#06JG

SSIDs factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. SSID Visibility:

Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID across the network, thus making it visible to all network users. Auto Channel Selection:

Enabling this feature automatically selects the channel that will provide the best wireless performance. This feature is not supported in WDS with AP mode. The channel selection process only occurs when the AP is booting up. Channel:

To change the channel, use the drop-down menu VQ OCMG VJG FGUKTGF UGNGEVKQP

0QVG 6JG YKTGNGUU

adapters will automatically scan and match the wireless settings.) Channel Width:

+PFKECVGUYJGVJGTVJGFGXKEGKUECRCDNGQH/*\QRGTCVKQPQPN[QTDQVJ/*\CPF/*\QRGTCVKQP

D-Link DAP-2310 User Manual 18 5GEVKQP%QPIWTCVKQP Remote AP MAC Address:

Site Survey:

Authentication:

Enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks. Click on the Scan button to search for available wireless networks, then click on the available network that you want to connect with. Use the drop-down menu to choose Open System, Shared Key, or WPA-Personal. Select Open System to communicate the key across the network. Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is enabled, this option is not available. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link DAP-2310 User Manual 19 5GEVKQP%QPIWTCVKQP WDS mode In WDS mode, the DAP-2310 wirelessly connects multiple networks, without functioning as a wireless AP. Wireless Band: Select 2.4GHz from the drop-down menu. Mode:

WDS is selected from the drop-down menu. Network Name (SSID):

5GTXKEG 5GV +FGPVKHKGT

55+& KU VJG PCOG

FGUKIPCVGF HQT C URGEKE YKTGNGUU NQECN CTGC

PGVYQTM

9.#0 6JG 55+&U HCEVQT[ FGHCWNV

setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. SSID Visibility:

Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID across the network, thus making it visible to all network users. Auto Channel Selection:

Enabling this feature automatically selects the channel that will provide the best wireless performance. This feature is not supported in WDS mode. Channel:

All devices on the network must share the same channel. To change the channel, use the drop-down menu to make the desired selection. Channel Width:

Use the drop-down menu to choose 20 MHz or Auto 20/40 MHz. Remote AP MAC Address:

Enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks. D-Link DAP-2310 User Manual 20 5GEVKQP%QPIWTCVKQP Site Survey:

Click on the Scan button to search for available wireless networks, then click on the available network that you want to connect with. Authentication:

Use the drop-down menu to choose Open System, Shared Key, or WPA-Personal. Select Open System to communicate the key across the network. Select Shared Key to limit communication to only those devices that share the same WEP settings. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link DAP-2310 User Manual 21 5GEVKQP%QPIWTCVKQP Wireless Client mode Wireless Band: Select 2.4GHz from the drop-down menu. Mode:

Wireless Client is selected from the drop-down menu. Network Name

(SSID):

5GTXKEG5GV+FGPVKGT

55+&KUVJGPCOGFGUKIPCVGFHQTCURGEKE

YKTGNGUUNQECNCTGCPGVYQTM

9.#06JG55+&UHCEVQT[FGHCWNV

setting is dlink. The SSID can be easily changed to connect to an existing wireless network. SSID Visibility:

This option is unavailable in Wireless Client mode. Auto Channel Selection:

Enabling this feature automatically selects the channel that will provide the best wireless performance. This feature is not supported in Wireless Client mode. Channel:

The channel used will be displayed, and matches the AP that the DAP-2310 is connected to when set to Wireless Client mode. Channel Width:

Use the drop-down menu to choose 20 MHz or Auto 20/40 MHz. Site Survey:

Click on the Scan button to search for available wireless networks, then click on the available network that you want to connect with. Use the drop-down menu to choose Open System or WPA-Personal. Authentication:

Select Open System to communicate the key across the network. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. Enable:

Check to enable clone MAC. This feature will allow you to change the MAC address of the access point to the MAC address of a client. MAC Source:

Select the MAC source from the drop-down menu. MAC Address:

Enter the MAC address that you would like to assign to the access point. D-Link DAP-2310 User Manual 22 5GEVKQP%QPIWTCVKQP Open System/Shared Key Authentication Encryption:

Use the radio button to disable or enable encryption. Key Type*:

Select HEX or ASCII. Key Size:

Select 64 Bits or 128 Bits. Key Index (1-

4):

Select the 1st through the 4th key to be the active key. Key:

+PRWVWRVQHQWTMG[UHQTGPET[RVKQP;QWYKNN

select one of these keys in the Key Index drop-down menu.

**Hexadecimal (HEX) digits consist of the numbers 0-9 and the letters A-F.

*ASCII (American Standard Code for Information Interchange) is a code that represents English letters using numbers ranging from 0-127. D-Link DAP-2310 User Manual 23 5GEVKQP%QPIWTCVKQP WPA/WPA2-Personal Authentication WPA Mode:

When WPA-Personal is selected for Authentication type, you must also select a WPA mode from the FTQRFQYPOGPWAUTO (WPA or WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use different algorithms. AUTO (WPA or WPA2) allows you to use both WPA and WPA2. Cipher Type:

When you select WPA-Personal, you must also select AUTO, AES, or TKIP from the drop-down menu. Group Key Update:

Select the interval during which the group key will be valid. The default value of 1800 is recommended. Select ManualVQGPVGT[QWTMG[

2CUU2JTCUG

Periodical Key Change:

;QWECPUGNGEVPeriodical Key Change to have the access point automatically change your PassPhrase. Enter the Activate From time and the time in hours to change the key. PassPhrase:

When you select WPA-Personal, please enter a PassPhrase KPVJGEQTTGURQPFKPIGNF

D-Link DAP-2310 User Manual 24 5GEVKQP%QPIWTCVKQP WPA/WPA2-Enterprise Authentication WPA Mode:

When WPA-Enterprise is selected, you must also select a WPA mode from the drop-down OGPWAUTO (WPA or WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use different algorithms. AUTO (WPA or WPA2) allows you to use both WPA and WPA2. Cipher Type:

When WPA-Enterprise is selected, you must also select a cipher type from the drop-down OGPWAuto, AES, or TKIP. Group Key Update Interval:

Select the interval during which the group key will be valid. The recommended value is 1800. A lower interval may reduce data transfer rates. Network Access Protection:

RADIUS Server:

Enable or disable Microsoft Network Access Protection. Enter the IP address of the RADIUS server. RADIUS Port:

Enter the RADIUS port. RADIUS Secret:

Enter the RADIUS secret. D-Link DAP-2310 User Manual 25 5GEVKQP%QPIWTCVKQP 802.1x Authentication Key Update Interval:

Select the interval during which the group MG[YKNNDGXCNKF

300 is the recommended value). A lower interval may reduce data transfer rates. RADIUS Server:

Enter the IP address of the RADIUS server. RADIUS Port:

Enter the RADIUS port. RADIUS Secret:

Enter the RADIUS secret. D-Link DAP-2310 User Manual 26 5GEVKQP%QPIWTCVKQP LAN LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN KPVGTHCEGHQTVJG&#26JGUGUGVVKPIUOC[DGTGHGTTGFVQCURTKXCVGUGVVKPIU;QWOC[EJCPIGVJG.#0+2CFFTGUU

if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet. Get IP From:

Static IP (Manual) is chosen here. Choose this option if you do not have a DHCP server in your network, or if you wish to assign a static IP address to the DAP-2310. When Dynamic IP (DHCP) is UGNGEVGFVJGQVJGTGNFUJGTGYKNNDGITC[GFQWV

Please allow about two minutes for the DHCP client to be functional once this selection is made. IP Address:

The default IP address is 192.168.0.50. Assign a static IP address that is within the IP address range of your network. Subnet Mask:

Enter the subnet mask. All devices in the network must share the same subnet mask. Default Gateway:

Enter the IP address of the gateway in your network. If there is a gateway in your network, please enter an IP address within the range of your network. D-Link DAP-2310 User Manual 27 5GEVKQP%QPIWTCVKQP Advanced Settings Performance Wireless:

Use the drop-down menu to turn the wireless function On or Off. Wireless Mode:

Data Rate*:

The different combination of clients that can be supported include Mixed 802.11n, 802.11g and 802.11b, Mixed 802.11g and 802.11b and 802.11n Only. Please note that when backwards compatibility is enabled for legacy

ID ENKGPVU FGITCFCVKQP QH P

wireless performance is expected. Indicate the base transfer rate of wireless adapters on the wireless LAN. The AP will adjust the base transfer rate depending on the base rate of the connected device. If there are obstacles or interference, the AP will step down the rate. This option is enabled in Mixed 802.11g and 802.11b mode. The choices available are Best (Up to 54), 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2 or 1.

/CZKOWOYKTGNGUUUKIPCNTCVGFGTKXGFHTQO+'''5VCPFCTFPCPFIURGEKECVKQPU#EVWCNFCVCVJTQWIJRWVOC[XCT[0GVYQTMEQPFKVKQPUCPFGPXKTQPOGPVCN

HCEVQTUKPENWFKPIXQNWOGQHPGVYQTMVTCHEDWKNFKPIOCVGTKCNUCPFEQPUVTWEVKQPCPFPGVYQTMQXGTJGCFECPNQYGTCEVWCNFCVCVJTQWIJQWVTCVG

D-Link DAP-2310 User Manual 28 5GEVKQP%QPIWTCVKQP Beacon Interval

(25-500):

$GCEQPUCTGRCEMGVUUGPVD[CPCEEGUURQKPVVQU[PEJTQPK\GCYKTGNGUUPGVYQTM5RGEKH[CXCNWGKPOKNNKUGEQPFU6JG

FGHCWNV

100) is recommended. Setting a higher beacon interval can help to save the power of wireless clients, while setting a lower one can help a wireless client connect to an access point faster. DTM Interval

(1-15):

5GNGEVC&GNKXGT[6TCHE+PFKECVKQP/GUUCIGUGVVKPIDGVYGGP1 and 15. The default value is 1. DTIM is a countdown in-

forming clients of the next window for listening to broadcast and multicast messages. Transmit Power:

This setting determines the power level of the wireless transmission. Transmitting power can be adjusted to eliminate overlapping of wireless area coverage between two access points where interference is a major concern. For example, if wireless coverage is intended for half of the area, then select 50% as the option. Use the drop-down menu to select 100%, 50%, 25%, or 12.5%. WMM (Wi-Fi Multimedia):

WMM stands for Wi-Fi Multimedia. Enabling this feature will improve the user experience for audio and video applica-

tions over a Wi-Fi network. Ack Time Out

(2.4 GHZ, 64~200) :

Short GI:

6QGHHGEVKXGN[QRVKOK\GVJTQWIJRWVQXGTNQPIFKUVCPEGNKPMUGPVGTCXCNWGHQT#EMPQYNGFIGOGPV6KOG1WVHTQO64 to 200 OKETQUGEQPFUKPVJG)*\KPVJGGNFRTQXKFGF

Select Enable or Disable. Enabling a short guard interval can increase throughput. However, be aware that it can also increase the error rate in some installations due to increased sensitivity to radio-frequency installations. IGMP Snooping:

Select Enable or Disable+PVGTPGV)TQWR/CPCIGOGPV2TQVQEQNCNNQYUVJG#2VQTGEQIPK\G+)/2SWGTKGUCPFTGRQTVU

UGPVDGVYGGPTQWVGTUCPFCP+)/2JQUV

YKTGNGUU56#9JGP+)/2UPQQRKPIKUGPCDNGFVJG#2YKNNHQTYCTFOWNVKECUV

RCEMGVUVQCP+)/2JQUVDCUGFQP+)/2OGUUCIGURCUUKPIVJTQWIJVJG#2

Connection Limit:

Select Enable or Disable. This is an option for load balancing. This determines whether to limit the number of users CEEGUUKPIVJKUFGXKEG6JGGZCEVPWODGTKUGPVGTGFKPVJG7UGT.KOKVGNFDGNQY6JKUHGCVWTGCNNQYUVJGWUGTVQUJCTG

VJGYKTGNGUUPGVYQTMVTCHECPFVJGENKGPVWUKPIOWNVKRNG#2U+HVJKUHWPEVKQPKUGPCDNGFYJGPVJGPWODGTQHWUGTU

exceeds this value, the DAP-2310 will not allow clients to associate with the AP. User Limit (0-64):

Multicast Rate for 2.4G Band 5GVVJGOCZKOWOCOQWPVQHWUGTUVJCVCTGCNNQYGFCEEGUU

0-64 users). To use this feature, the Connection Limit above must be enabled. For most users, a limit of 10 is recommended. The default setting is 20. 5GNGEVVJGOWNVKECUVTCVGHQT)DCPFThe choices available are 130,117,78,65,58.5,54, 52,48, 39,36, 26,24, 19.5,18, 13,12, 9, 6.5,6, 11, 5.5, 2 or 1. D-Link DAP-2310 User Manual 29 5GEVKQP%QPIWTCVKQP Multi-SSID 6JGFGXKEGUWRRQTVUWRVQHQWTOWNVKRNG5GTXKEG5GV+FGPVKGTU+PVJGBasic > Wireless section, you can set the Primary SSID. The SSIDs factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. Enable Multi-SSID:

Band:

Index:

SSID:

SSID Visibility:

Check to enable support for multiple SSIDs. This read-only value is the current band setting.

;QWECPUGNGEVWRVQVJTGGOWNVK55+&U9KVJ

the Primary SSID, you have a total of four multi-SSIDs. 5GTXKEG 5GV +FGPVKGT

55+& KU VJG PCOG

FGUKIPCVGFHQTCURGEKEYKTGNGUUNQECNCTGC

PGVYQTM

9.#06JG55+&UHCEVQT[FGHCWNV

setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID across the network, thus making it visible to all network users. Security:

The Multi-SSID security can be Open System, WPA-Personal, WPA-Enterprise, or 802.1x. For a detailed description of the Open System parameters, please go to page 25. For a detailed description of the WPA-Personal parameters, please go to page 26. For a detailed description of the WPA-Enterprise parameters, please go to page 27. For a detailed description of the O802.1x parameters, please go to page 28. D-Link DAP-2310 User Manual 30 5GEVKQP%QPIWTCVKQP Priority:

Check the Enable Priority box at the top of this window to enable. Select the priority from the drop-down menu. WMM (Wi-Fi Multimedia):

Encryption:

Select Enable or Disable. When you select Open System, toggle between Enable and Disable. If EnableKUUGNGEVGFVJG-G[6[RG-G[5K\G-G[

+PFGZ

`-G[CPF%QPTO-G[UOWUVCNUQDGEQPIWTGF

Key Type:

Select HEX or ASCII. Key Size:

Select 64 Bits or 128 Bits. Key Index (1-4):

Select from the 1st to 4th key to be set as the active key. Key:

Input up to four keys HQTGPET[RVKQP;QWYKNNUGNGEVQPGQHVJGUGMG[UKPVJG-G[+PFGZFTQRFQYPOGPW

WPA Mode:

When you select either WPA-Personal or WPA-Enterprise[QWOWUVCNUQEJQQUGC92#OQFGHTQOVJGFTQRFQYPOGPW

AUTO (WPA or WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use different algorithms. AUTO (WPA or WPA2) CNNQYU[QWVQWUGDQVJ92#CPF92#+PCFFKVKQP[QWOWUVEQPIWTG%KRJGT6[RGCPF)TQWR-G[7RFCVG+PVGTXCN

Cipher Type:

Select Auto, AES, or TKIP from the drop-down menu. Group Key Update Interval:

Select the interval during which the group key will be valid. The default value of 1800 seconds is recommended. PassPhrase:

When you select WPA-Personal, please enter a PassPhrase KPVJGEQTTGURQPFKPIGNF

Conrm PassPhrase:

RADIUS Server:

When you select WPA-Personal, please re-enter the PassPhrase entered in the previous item KPVJGEQTTGURQPFKPIGNF

When you select WPA-EnterpriseGPVGTVJG+2CFFTGUUQHVJG4#&+75UGTXGT+PCFFKVKQP[QWOWUVEQPIWTG4#&+75

Port and RADIUS Secret. RADIUS Port:

Enter the RADIUS port. RADIUS Secret:

Enter the RADIUS secret. D-Link DAP-2310 User Manual 31 5GEVKQP%QPIWTCVKQP VLAN VLAN List 6JG&#2UWRRQTVU8.#0U8.#0UECPDGETGCVGFYKVJC0COGCPF8+&/IOV

6%2UVCEM.#02TKOCT[

Multiple SSID, and WDS connection can be assigned to VLANs as they are physical ports. Any packet which enters the DAP-2310 without a VLAN tag will have a VLAN tag inserted with a PVID. The VLAN List tab displays the current VLANs. VLAN Status:

Use the radio button to toggle between Enable or Disable. Next, go to the Add/Edit VLAN tab to add or modify an item on the VLAN List tab. D-Link DAP-2310 User Manual 32 5GEVKQP%QPIWTCVKQP Port List 6JG2QTV.KUVVCDFKURNC[UVJGEWTTGPVRQTVU+H[QWYCPVVQEQPIWTGVJGIWGUVCPFKPVGTPCNPGVYQTMUQPC8KTVWCN.#0

8.#0VJGUYKVEJCPF&*%2UGTXGT[QWCTGWUKPIOWUVCNUQUWRRQTV8.#0U#UCRTGTGSWKUKVGUVGREQPIWTGCRQTV

on the switch for handling VLAN tagged packets as described in the IEEE 802.1Q standard. VLAN Status:

Use the radio button to toggle to Enable. Next, go to the Add/Edit VLAN tab to add or modify an item on the VLAN List tab. Port Name:

The name of the port is displayed in this column. Tag VID:

The Tagged VID is displayed in this column. Untag VID:

The Untagged VID is displayed in this column. PVID:

6JG2QTV8.#0+FGPVKGTKUFKURNC[GFKPVJKU

column. D-Link DAP-2310 User Manual 33 5GEVKQP%QPIWTCVKQP Add/Edit VLAN The Add/Edit VLANVCDKUWUGFVQEQPIWTG8.#0U1PEG[QWJCXGOCFGVJGFGUKTGFEJCPIGUENKEMVJGSave button to let your changes take effect. VLAN Status:

Use the radio button to toggle to Enable. VLAN ID:

Provide a number between 1 and 4094 for the Internal VLAN. VLAN Name:

Enter the VLAN to add or modify. D-Link DAP-2310 User Manual 34 5GEVKQP%QPIWTCVKQP PVID Setting The PVID SettingVCDKUWUGFVQGPCDNGFKUCDNGVJG2QTV8.#0+FGPVKGT#WVQ#UUKIP5VCVWUCUYGNNCUVQEQPIWTG

various types of PVID settings. Click the Save button to let your changes take effect. VLAN Status:

Use the radio button to toggle between Enable and Disable. PVID Auto Assign Status:

Use the radio button to toggle PVID auto assign status to Enable. D-Link DAP-2310 User Manual 35 5GEVKQP%QPIWTCVKQP Intrusion The Wireless Intrusion Protection window is used to set APs as All, Valid, Neighborhood, Rogue, and New. Click the Save button to let your changes take effect. AP List:

The choices include All, Valid, Neighbor, Rogue, and New. Detect:

Click this button to initiate a scan of the network. D-Link DAP-2310 User Manual 36 5GEVKQP%QPIWTCVKQP Schedule The Wireless Schedule Settings window is used to add and modify scheduling rules on the device. Click the Save button to let your changes take effect. Wireless Schedule:

Use the drop-down menu to enable the devices scheduling feature. Name:

Enter a name for the new scheduling rule in VJGGNFRTQXKFGF

Index:

Select the index from the drop-down menu. SSID:

Enter the name of your wireless network 55+&

Day(s):

Toggle the radio button between All Week and Select Day(s). If the second option is UGNGEVGFEJGEMVJGURGEKEFC[U[QWYCPV

the rule to be effective on. All Day(s):

Check this box to have your settings apply 24 hours a day. Start Time:

Enter the start time for your rule. If you selected All Day, this option will be greyed out. End Time:

Enter the end time for your rule. Add:

Click to add the rule to the list. Schedule Rule List:

This section will display the list of created schedules. Save:

Click the Save button to save your created rules. D-Link DAP-2310 User Manual 37 5GEVKQP%QPIWTCVKQP QoS 3WCNKV[QH5GTXKEG

3Q5GPJCPEGUVJGGZRGTKGPEGQHWUKPICPGVYQTMD[RTKQTKVK\KPIVJGVTCHEQHFKHHGTGPVCRRNKECVKQPU

#3Q54WNGKFGPVKGUCURGEKEOGUUCIGQYCPFCUUKIPUCRTKQTKV[VQVJCVQY(QTOQUVCRRNKECVKQPUVJGRTKQTKV[

ENCUUKGTUGPUWTGVJGTKIJVRTKQTKVKGUCPFURGEKE3Q54WNGUCTGPQVTGSWKTGF3Q5UWRRQTVUQXGTNCRUDGVYGGPTWNGU

+HOQTGVJCPQPGTWNGOCVEJGUCURGEKEOGUUCIGQYVJGTWNGYKVJVJGJKIJGUVRTKQTKV[YKNNDGWUGF

QoS (Quality of Service):

Enable this option if you want to allow QoS to RTKQTKVK\G[QWTVTCHE2TKQTKV[%NCUUKGTU

HTTP:

#NNQYU VJG CEEGUU RQKPV VQ TGEQIPK\G *662

transfers for many common audio and video UVTGCOUCPFRTKQTKVK\GVJGOCDQXGQVJGTVTCHE

Such streams are frequently used by digital media players. Automatic:

When enabled, this option causes the access RQKPVVQCWVQOCVKECNN[CVVGORVVQRTKQTKVK\GVTCHE

UVTGCOUVJCVKVFQGUPQVQVJGTYKUGTGEQIPK\G

based on the behavior that the streams exhibit. 6JKUCEVUVQFGRTKQTKVK\GUVTGCOUVJCVGZJKDKV

bulk transfer characteristics, such as file VTCPUHGTUYJKNGNGCXKPIKPVGTCEVKXGVTCHEUWEJ

as gaming or VoIP, running at a normal priority. D-Link DAP-2310 User Manual 38 5GEVKQP%QPIWTCVKQP Name:

'PVGTCPCOGHQTVJGPGY3Q5TWNGKPVJGGNFRTQXKFGF

Priority:

Protocol:

7UGVJGFTQRFQYPOGPWVQUGNGEVVJGFGUKTGFRTKQTKV[Background (BK), Best Effort (BE), Video (VI), or Voice (VO). 7UGVJGFTQRFQYPOGPWVQEJQQUGVJGCRRTQRTKCVGRTQVQEQNWUGFD[VJGOGUUCIGUAny, TCP, UDP, Both, IMCP, or Other. Host 1 IP Range:

6JGTWNGCRRNKGUVQCQYQHOGUUCIGUHQTYJKEJQPGEQORWVGTU+2CFFTGUUHCNNUYKVJKPVJGTCPIGUGVJGTG

Host 1 Port Range:

6JGTWNGCRRNKGUVQCQYQHOGUUCIGUHQTYJKEJJQUVURQTVPWODGTKUYKVJKPVJGTCPIGUGVJGTGYJGPVJG2TQVQEQNKUUGV

to TCP, UDP, or Both. Host 2 IP Range:

6JGTWNGCRRNKGUVQCQYQHOGUUCIGUHQTYJKEJVJGQVJGTEQORWVGTU+2CFFTGUUHCNNUYKVJKPVJGTCPIGUGVJGTG

Host 2 Port Range:

6JGTWNGCRRNKGUVQCQYQHOGUUCIGUHQTYJKEJJQUVURQTVPWODGTKUYKVJKPVJGTCPIGUGVJGTGwhen the Protocol is set to TCP, UDP, or Both. D-Link DAP-2310 User Manual 39 5GEVKQP%QPIWTCVKQP AP Array

#P#2CTTC[KUCUGVQHFGXKEGUQPCPGVYQTMVJCVCTGQTICPK\GFKPVQCUKPINGITQWRVQKPETGCUGGCUGQHOCPCIGOGPV

Enable Array:

This check box allows the user to enable the AP array function. The three modes that are available are Master, Backup Master, and Slave. APs in the same array will WUGVJGUCOGEQPIWTCVKQP6JGEQPIWTCVKQPYKNNU[PE

the Master AP to the Slave AP and the Backup Master AP when a Slave AP and a Backup Master AP join the AP array. AP Array Name:

Enter a name for the AP array you have created. AP Array Password:

Enter a password that will be used to access the AP array you have created. Scan AP Array List:

Click this button to initiate a scan of all the available APs currently on the network. AP Array List:

This table displays the current AP array status for the HQNNQYKPIRCTCOGVGTU#TTC[0COG/CUVGT+2/#%

Master, Backup Master, Slave, and Total. Current Array Members:

This table displays all the current array members. The DAP-2310 AP array feature supports up to eight AP array members. D-Link DAP-2310 User Manual 40 5GEVKQP%QPIWTCVKQP Wireless Basic Settings Network Name

(SSID):

5GNGEVVJKUQRVKQPVQWUGC0GVYQTM0COG

55+&

SSID Visibility:

Select this option to enable SSID Visibility. Auto Channel Selection:

Select this option to use Auto Channel Selection. Channel Width:

Select this option to specify the Channel Width. Security:

Select this option to use Wireless Security. Wireless Advanced Settings Data Rate:

Select this option to specify the Data Rate. Beacon Interval:

Select this option to specify the Beacon Interval. DTIM Interval:

Select this option to specify the DTIM Interval. Transmit Power:

Select this option to specify the Transmit Power. WMM (Wi-Fi Multimedia):

Select this option to use WMM. Ack Time Out:

Select this option to use Ack Time Out. Short GI:

5GNGEVVJKUQRVKQPVQWUGC5JQTV)+

IGMP Snooping:

5GNGEVVJKUQRVKQPVQGPCDNG+)/25PQQRKPI

Link Integrity:

Select this option to use Link Integrity. Connection Limit:

Select this option to use a Connection Limit. Wireless ACL:

Select this option to use Wireless ACL. D-Link DAP-2310 User Manual 41 5GEVKQP%QPIWTCVKQP Multiple SSID & VLAN SSID:

Select this option to use an SSID. SSID Visibility:

Select this option to make the SSID Visible. Security:

Select this option to use Wireless Security. WMM:

Select this option to use WMM. VLAN:

Select this option to use VLAN. Advanced Functions Schedule Settings:

Select this option to use Scheduled Settings. QoS Settings:

Select this option to use Quality of Service. DHCP Server Settings:

Select this option to use DHCP. Log Settings:

Select this option to enable the Log Settings. Time and Date Settings:

Select this option to use the Time and Date Settings. Administration Settings SNMP Settings:

Select this option to enable SNMP Settings. System Name Settings:

Select this option to use a System Name. Login Settings:

Select this option to use Login Settings. Console Settings:

Select this option to enable Console Settings. D-Link DAP-2310 User Manual 42 5GEVKQP%QPIWTCVKQP

#425RQQPI2TGXGPVKQP 6JG#425RQQPI2TGXGPVKQPHGCVWTGCNNQYUWUGTUVQCFF+2/#%CFFTGUUOCRRKPIVQRTGXGPV#42URQQPICVVCEM

ARP Spoong Prevention:

This check box allows you to enable the ARP spoofing prevention function. Gateway IP Address:

Enter a gateway IP address. Gateway MAC Address:

Enter a gateway MAC address. D-Link DAP-2310 User Manual 43 5GEVKQP%QPIWTCVKQP DHCP Server Dynamic Pool Settings 6JG&*%2CFFTGUURQQNFGPGUVJGTCPIGQHVJG+2CFFTGUUVJCVECPDGCUUKIPGFVQUVCVKQPUKPVJGPGVYQTM#&[PCOKE

Pool allows wireless stations to receive an available IP with lease time control. If needed or required in the network, the DAP-2310 is capable of acting as a DHCP server. Function Enable/

Disable:

&[PCOKE *QUV %QPIWTCVKQP 2TQVQEQN

&*%2

assigns dynamic IP addresses to devices on VJG PGVYQTM 6JKU RTQVQEQN UKORNKGU PGVYQTM

management and allows new wireless devices to receive IP addresses automatically without the need to manually assign new IP addresses. Select Enable to allow the DAP-2310 to function as a DHCP server. IP Assigned From:

+PRWVVJGTUV+2CFFTGUUCXCKNCDNGHQTCUUKIPOGPV

on your network. The Range of Pool (1-254):

Subnet Mask:

Gateway:

WINS:

Enter the number of IP addresses available for assignment. IP addresses are increments of the

+2CFFTGUUURGEKGFKPVJG+2#UUKIPGF(TQO

GNF

All devices in the network must have the same subnet mask to communicate. Enter the submask for the network here. Enter the IP address of the gateway on the network. 5RGEKH[VJG9KPFQYU+PVGTPGV0COKPI5GTXKEG

9+05UGTXGTCFFTGUUHQTVJGYKTGNGUUPGVYQTM9+05KUCU[UVGOVJCV

determines the IP address of a network computer that has a dynamically assigned IP address. D-Link DAP-2310 User Manual 44 5GEVKQP%QPIWTCVKQP DNS:

'PVGTVJG+2CFFTGUUQHVJG&QOCKP0COG5[UVGO

&05UGTXGT6JG&05UGTXGTVTCPUNCVGUFQOCKPPCOGUUWEJCU

www.dlink.com into IP addresses. Domain Name:

'PVGTVJGFQOCKPPCOGQHVJGPGVYQTMKHCRRNKECDNG

#PGZCORNGQHCFQOCKPPCOGKUYYYFNKPMEQO

Lease Time

(60-31536000 sec):

The lease time is the period of time before the DHCP server will assign new IP addresses. D-Link DAP-2310 User Manual 45 5GEVKQP%QPIWTCVKQP Static Pool Setting 6JG&*%2CFFTGUURQQNFGPGUVJGTCPIGQH+2CFFTGUUGUVJCVECPDGCUUKIPGFVQUVCVKQPUQPVJGPGVYQTM#UVCVKE

RQQNCNNQYUURGEKEYKTGNGUUUVCVKQPUVQTGEGKXGCZGF+2YKVJQWVVKOGEQPVTQN

Function Enable/

Disable:

Assigned IP:

Dynamic Host Configuration Protocol

&*%2 CUUKIPU +2 CFFTGUUGU VQ YKTGNGUU

devices on the network. This protocol UKORNKGUPGVYQTMOCPCIGOGPVCPFCNNQYU

new wireless devices to receive IP addresses automatically without the need to manually assign IP addresses. Select Enable to allow the DAP-2310 to function as a DHCP server. Use the Static Pool Settings to assign the same IP address to a device every time you start up. The IP addresses assigned in the Static Pool list must NOT be in the same IP range as the Dynamic Pool. After you have assigned a static IP address to a device via its MAC address, click Save; the device will appear in the Assigned Static Pool at the DQVVQOQHVJGUETGGP;QWECPGFKVQTFGNGVG

the device in this list. Assigned MAC Address:

Enter the MAC address of the device requesting association here. Subnet Mask:

&GPGVJGUWDOCUMQHVJG+2CFFTGUUURGEKGFKPVJG+2#UUKIPGF(TQOGNF

D-Link DAP-2310 User Manual 46 5GEVKQP%QPIWTCVKQP Gateway:

5RGEKH[VJG)CVGYC[CFFTGUUHQTVJGYKTGNGUUPGVYQTM

WINS:

Specify the Windows Internet Naming Service

9+05UGTXGTCFFTGUUHQTVJGYKTGNGUUPGVYQTM9INS is a system that determines the IP address of a network computer with a dynamically assigned IP address, if applicable. DNS:

'PVGTVJG&QOCKP0COG5[UVGO

&05UGTXGTCFFTGUUHQTVJGYKTGNGUUPGVYQTM6JG&05UGTXGTVTCPUNCVGUFQOCKPPCOGU

such as www.dlink.com into IP addresses. Domain Name:

Specify the domain name for the network. D-Link DAP-2310 User Manual 47 5GEVKQP%QPIWTCVKQP Current IP Mapping List This window displays information about the current assigned DHCP dynamic and static IP address pools. This information is available when you enable DHCP server on the AP and assign dynamic and static IP address pools. Current DHCP Dynamic Prole:

These are IP address pools the DHCP server has assigned using the dynamic pool setting. Host Name:

The host name of a device on the network that is assigned an IP address from the DHCP dynamic pool. Binding MAC Address:

The MAC address of a device on the network that is assigned an IP address from the DHCP dynamic pool. Assigned IP Address:

The current corresponding DHCP-assigned IP address of the device. Lease Time:

The length of time that the dynamic IP address will be valid. Current DHCP Static Pools:

These are the IP address pools of the DHCP server assigned through the static pool settings. Host Name:

The host name of a device on the network that is assigned an IP address from the DHCP dynamic pool. Binding MAC Address:

Assigned IP Address:

The MAC address of a device on the network that is within the DHCP static IP address pool. The current corresponding DHCP-assigned static IP address of the device. D-Link DAP-2310 User Manual 48 5GEVKQP%QPIWTCVKQP Filters Wireless MAC ACL Wireless Band:

Displays the current wireless band rate. Access Control List:

Select Disable VQFKUCDNGVJGNVGTUHWPEVKQP

Select Accept to accept only those devices with MAC addresses in the Access Control List. All other devices not on the list will be rejected. Select Reject to reject the devices with MAC addresses on the Access Control List. All other devices not on the list will be accepted. MAC Address:

Enter each MAC address that you wish to KPENWFGKP[QWTNVGTNKUVCPFENKEMAdd. MAC Address List:

Upload ACL File:

When you enter a MAC address, it appears in this list. Highlight a MAC address and click Delete to remove it from this list.

;QWOC[ETGCVGCP#%.NKUVCPFWRNQCFKVVQ

the access point instead of manually entering the information. Once created, click the BrowseDWVVQPCPFNQECVG[QWTNG5GNGEVKV

and then click Upload. Download ACL File:

Click DownloadVQGZRQTVVJG#%.VQCNG

on your computer. D-Link DAP-2310 User Manual 49 5GEVKQP%QPIWTCVKQP WLAN Partition Wireless Band:

Displays the current wireless band rate. Link Integrity:

Select Enable or Disable. Ethernet to WLAN Access:

The default is Enable. When disabled, all data from the Ethernet to associated wireless devices will be blocked. Wireless devices can still send data to the Ethernet. Internal Station Connection:

The default value is Enable, which allows stations to inter-communicate by connecting to a target AP. When disabled, wireless stations cannot exchange data through the AP. D-Link DAP-2310 User Manual 50 5GEVKQP%QPIWTCVKQP Status Device Information Device Information:

6JKUTGCFQPN[YKPFQYFKURNC[UVJGEQPIWTCVKQP

UGVVKPIUQHVJG&#2KPENWFKPIVJGTOYCTG

version and the device's MAC address. D-Link DAP-2310 User Manual 51 5GEVKQP%QPIWTCVKQP Client Information Client Information:

This window displays the wireless client information for clients currently connected to the DAP-2310. The following information is available for each client communicating with the DAP-2310. SSID:

MAC:

Band:

Displays the SSID of the client. Displays the MAC address of the client. Displays the wireless band that the client is connected to. Authentication:

Displays the type of authentication being used. Signal:

Displays the client's signal strength. Power Saving Mode:

Displays the status of the power saving feature. D-Link DAP-2310 User Manual 52 5GEVKQP%QPIWTCVKQP WDS Information WDS Information:

This window displays the Wireless Distribution System information for clients currently connected to the DAP-2310. The following information is available for each client communicating with the DAP-2310. Name:

Displays the SSID of the client. MAC:

Displays the MAC address of the client. Authentication:

Displays the type of authentication being used. Signal:

Status:

Displays the client's signal strength. Displays the status of the power saving feature. D-Link DAP-2310 User Manual 53 5GEVKQP%QPIWTCVKQP Stats Ethernet Ethernet Trafc Statistics:

This page displays transmitted and received count statistics for packets and bytes. D-Link DAP-2310 User Manual 54 5GEVKQP%QPIWTCVKQP 9.#06TCHE WLAN Trafc Statistics:

This page displays wireless network statistics for data throughput, transmitted and received frames, and frame errors. D-Link DAP-2310 User Manual 55 5GEVKQP%QPIWTCVKQP Log View Log View Log:

The APs embedded memory displays system and network messages including a time stamp and message type. The log information includes but is not limited to the HQNNQYKPI KVGOU EQNF UVCTV #2 WRITCFKPI

TOYCTGENKGPVCUUQEKCVGCPFFKUCUUQEKCVG

with AP, and web login. The web page holds up to 500 logs. D-Link DAP-2310 User Manual 56 5GEVKQP%QPIWTCVKQP Log Settings Log Server/IP Address:

Enter the IP address of the server you would like to send the DAP-2310 log to. Log Type:

Check the box for the type of activity you YCPVVQNQI6JGTGCTGVJTGGV[RGU5[UVGO

Activity, Wireless Activity, and Notice. Email Notication:

%JGEMVQGPCDNG'OCKNPQVKECVKQP

Outgoing Mail Server (SMTP):

Select the SMTP server from the drop-down menu. Authentication:

Check to enable authentication. SSL / TLS:

Check to enable SSL/TLS authentication. From Email Address:

'PVGTVJG(TQOGOCKNCFFTGUU

To Email Address:

Enter the destination email address. Email Server Address:

Enter the Email Server Address. SMTP Port:

Enter the SMTP port. Username:

Enter your email username. Password:

Enter your email password. Conrm Password:

Enter your email password again. Schedule:

Select when to send the log to your email KPJQWTU;QWYKNNTGEGKXGCPGOCKNYJGP

the log is full too. D-Link DAP-2310 User Manual 57 5GEVKQP%QPIWTCVKQP Maintenance Administration Settings

%JGEMQPGQTOQTGQHVJGXGOCKPECVGIQTKGUVQFKURNC[VJGXCTKQWUJKFFGPCFOKPKUVTCVQTRCTCOGVGTUCPFUGVVKPIU

FKURNC[GFQPVJGPGZVXGRCIGU

D-Link DAP-2310 User Manual 58 5GEVKQP%QPIWTCVKQP Limit Administrator

'CEJQHVJGXGOCKPECVGIQTKGUFKURNC[XCTKQWUJKFFGPCFOKPKUVTCVQTRCTCOGVGTUCPFUGVVKPIU

Limit Administrator VLAN ID:

Check the box provided and the enter the URGEKE8.#0+&VJCVVJGCFOKPKUVTCVQTYKNN

be allowed to log in from. Limit Administrator IP:

Check to enable the Limit Administrator IP address. IP Range:

Enter the IP address range that the administrator will be allowed to log in from and then click the Add button. D-Link DAP-2310 User Manual 59 5GEVKQP%QPIWTCVKQP System Name Settings

'CEJQHVJGXGOCKPECVGIQTKGUFKURNC[XCTKQWUJKFFGPCFOKPKUVTCVQTRCTCOGVGTUCPFUGVVKPIU

System Name:

The name of the device. The default name is D-Link DAP-2310. Location:

The physical location of the device, e.g. 72nd Floor, D-Link HQ. D-Link DAP-2310 User Manual 60 5GEVKQP%QPIWTCVKQP Login Settings

'CEJQHVJGXGOCKPECVGIQTKGUFKURNC[XCTKQWUJKFFGPCFOKPKUVTCVQTRCTCOGVGTUCPFUGVVKPIU

Login Name:

Enter a user name. The default is admin. Old Password:

When changing your password, enter the old password here. New Password:

When changing your password, enter the new password here. The password is case-sensitive.

#KUCFKHHGTGPVEJCTCEVGTVJCPC6JGNGPIVJ

should be between 0 and 12 characters. Conrm Password:

Enter the new password a second time for EQPTOCVKQPRWTRQUGU

D-Link DAP-2310 User Manual 61 5GEVKQP%QPIWTCVKQP Console Settings

'CEJQHVJGXGOCKPECVGIQTKGUFKURNC[XCTKQWUJKFFGPCFOKPKUVTCVQTRCTCOGVGTUCPFUGVVKPIU

Status:

Status is enabled by default. Uncheck the box to disable the console. Console Protocol:

Select the type of protocol you would like to use, Telnet or SSH. Timeout:

Set to 1 Min, 3 Mins, 5 Mins, 10 Mins, 15 Mins or Never. D-Link DAP-2310 User Manual 62 5GEVKQP%QPIWTCVKQP SNMP Settings

'CEJQHVJGXGOCKPECVGIQTKGUFKURNC[XCTKQWUJKFFGPCFOKPKUVTCVQTRCTCOGVGTUCPFUGVVKPIU

Status:

Check the box to enable the SNMP functions. This option is disabled by default. Public Community String:

Enter the public SNMP community string. Private Community String:

Enter the private SNMP community string. Trap Status:

Check the box to enable Trap Status. Trap Server IP:

Enter the Trap Server IP address. D-Link DAP-2310 User Manual 63 5GEVKQP%QPIWTCVKQP

(KTOYCTGCPF55.%GTVKECVKQP7RNQCF 6JKURCIGCNNQYUVJGWUGTVQRGTHQTOCTOYCTGWRITCFG#(KTOYCTGWRITCFGKUCHWPEVKQPVJCVWRITCFGVJGTWPPKPI

software used by the access point. This is a useful feature that prevents future bugs and allows for new features to DGCFFGFVQVJKURTQFWEV2NGCUGIQVQ[QWTNQECN&.KPMYGDUKVGVQUGGKHVJGTGKUCPGYGTXGTUKQPTOYCTGCXCKNCDNG

Upload Firmware From Local Hard Drive:

Language Pack Upgrade:

The current firmware version is displayed CDQXGVJGNGNQECVKQPGNF#HVGTFQYPNQCFKPI

VJG OQUV TGEGPV XGTUKQP QH TOYCTG HQT VJG

&#2 HTQO JVVRUWRRQTVFNKPMEQO VQ

your local computer, use the Browse button to NQECVGVJGTOYCTGNGQP[QWTEQORWVGT%NKEM

UploadVQWRFCVGVJGTOYCTGXGTUKQP2NGCUG

dont turn the power off while upgrading.

;QWOC[NQCFCNCPIWCIGRCEMVQFKURNC[VJG

utility in another language. Click Browse to NQECVG VJG NCPIWCIG RCEM NG QP [QWT NQECN

computer. After selecting and opening the file, click Upload to upload the file to the DAP-2310. Upload SSL Certication From Local Hard Drive:

Click BrowseVQNQECVGVJG55.%GTVKECVKQP

NGQP[QWTNQECNEQORWVGT#HVGTUGNGEVKPICPF

QRGPKPIVJGNGENKEMUploadVQWRNQCFVJGNG

to the DAP-2310. D-Link DAP-2310 User Manual 64 5GEVKQP%QPIWTCVKQP

%QPIWTCVKQP(KNG7RNQCF Upload File:

Click the Browse button to locate a previously UCXGFEQPIWTCVKQPNGQP[QWTNQECNEQORWVGT

#HVGTUGNGEVKPIVJGNGENKEMUpload to apply VJGEQPIWTCVKQPUGVVKPIUVQVJG&#2

Download Conguration File:

Click Download to save the current

&#2EQPIWTCVKQPVQ[QWTNQECNEQORWVGT

0QVGVJCVKH[QWUCXGQPGEQPIWTCVKQPYKVJ

the administrators password now, after resetting your DAP-2310, and then updating VQVJKUUCXGFEQPIWTCVKQPNGVJGRCUUYQTF

will be gone. D-Link DAP-2310 User Manual 65 5GEVKQP%QPIWTCVKQP Time and Date Current Time:

Displays the current time and date settings. Time Zone:

Use the drop-down menu to select your correct Time Zone. Enable Daylight Saving:

Check the box to Enable Daylight Saving Time. Daylight Saving Dates:

Use the drop-down menu to select the correct Daylight Saving offset. Enable NTP Server:

Check to enable the AP to get system time from an NTP server. NTP Server:

Enter the NTP server IP address. Set the Date and Time Manually:

;QWECPGKVJGTOCPWCNN[UGVVJGVKOGHQT[QWT

AP here, or you can click the Copy Your Computers Time Settings button to copy the time from the computer you are using

/CMG UWTG VJCV VJG EQORWVGTU VKOG KU UGV

correctly). D-Link DAP-2310 User Manual 66 5GEVKQP%QPIWTCVKQP System System Settings Restart the Device:

Click Restart to restart the DAP-2310. Restore to Factory Default Settings:

Click Restore to restore the DAP-2310 back to factory default settings. Clear Language Pack:

Click Clear to remove any loaded language packs. D-Link DAP-2310 User Manual 67 5GEVKQP%QPIWTCVKQP Help:

Scroll down the Help page for topics and explanations. Help D-Link DAP-2310 User Manual 68 Section 6 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DAP-2310. 4GCFVJGHQNNQYKPIFGUETKRVKQPUKH[QWCTGJCXKPIRTQDNGOU

6JGGZCORNGUDGNQYCTGKNNWUVTCVGFKP9KPFQYU:2+H

you have a different operating system, the screenshots on your computer will look similar to the following examples.)

9J[ECPV+CEEGUUVJGYGDDCUGFEQPIWTCVKQPWVKNKV[!

9JGPGPVGTKPIVJG+2CFFTGUUQHVJG&.KPMCEEGUURQKPV

HQTGZCORNG[QWCTGPQVEQPPGEVKPIVQC

website on the Internet nor do you have to be connected to the Internet. The device has the utility built-in to a ROM EJKRKPVJGFGXKEGKVUGNH;QWTEQORWVGTOWUVDGQPVJGUCOG+2UWDPGVVQEQPPGEVVQVJGYGDDCUGFWVKNKV[

/CMGUWTG[QWJCXGCPWRFCVGF,CXCGPCDNGFYGDDTQYUGT9GTGEQOOGPFVJGHQNNQYKPI

- Microsoft Internet Explorer 6.0 and higher

/Q\KNNC(KTGHQZCPFJKIJGT

)QQING Chrome 2.0 and higher

- Apple Safari 3.0 and higher

8GTKH[RJ[UKECNEQPPGEVKXKV[D[EJGEMKPIHQTUQNKFNKPMNKIJVUQPVJGFGXKEG+H[QWFQPQVIGVCUQNKFNKPMNKIJVVT[WUKPI

a different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on.

&KUCDNGCP[KPVGTPGVUGEWTKV[UQHVYCTGTWPPKPIQPVJGEQORWVGT5QHVYCTGTGYCNNUUWEJCU<QPG#NCTO$NCEM+EG

Sygate, Norton Personal Firewall, and Windows:2TGYCNNOC[DNQEMCEEGUUVQVJGEQPIWTCVKQPRCIGU%JGEMVJG

JGNRNGUKPENWFGFYKVJ[QWTTGYCNNUQHVYCTGHQTOQTGKPHQTOCVKQPQPFKUCDNKPIQTEQPIWTKPIKV

D-Link DAP-2310 User Manual 69 Section 6 - Troubleshooting

%QPIWTG[QWT+PVGTPGVUGVVKPIU

)QVQStart > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults.

%NKEMVJGConnection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK.

)QVQVJGAdvanced tab and click the button to restore these settings to their defaults. Click OK three times.

%NQUG[QWTYGDDTQYUGT

KHQRGPCPFQRGPKV

#EEGUUVJGYGDOCPCIGOGPV1RGP[QWTYGDDTQYUGTCPFGPVGTVJG+2CFFTGUUQH[QWT&.KPMCEEGUURQKPVKPVJG

address bar. This should open the login page for your the web management.

+H[QWUVKNNECPPQVCEEGUUVJGEQPIWTCVKQPWPRNWIVJGRQYGTVQVJGCEEGUURQKPVHQTUGEQPFUCPFRNWIDCEMKP

9CKVCDQWVUGEQPFUCPFVT[CEEGUUKPIVJGEQPIWTCVKQP+H[QWJCXGOWNVKRNGEQORWVGTUVT[EQPPGEVKPIWUKPIC

different computer.

9JCVECP+FQKH+HQTIQVO[RCUUYQTF!

If you forgot your password, you must reset your access point. Unfortunately, this process will change all your settings back to the factory defaults. 6QTGUGVVJGCEEGUURQKPVNQECVGVJGTGUGVDWVVQP

JQNGQPVJGTGCTRCPGNQHVJGWPKV9KVJVJGCEEGUURQKPVRQYGTGF

on, use a paperclip to hold the button down for 10 seconds. Release the button and the access point will go through its reboot process. Wait about 30 seconds to access the access point. The default IP address is 192.168.0.50. When logging in, the username is admin and leave the password box empty. D-Link DAP-2310 User Manual 70 Appendix B - Networking Basics Networking Basics Check your IP address After you install your network adapter, by default, the TCP/IP settings should be set to obtain an IP address from a

&*%2UGTXGT

KGYKTGNGUUTQWVGTCWVQOCVKECNN[6QXGTKH[[QWT+2CFFTGUURNGCUGHQNNQYVJGUVGRUDGNQY

Click on Start > Run. In the run box type cmd and click OK. At the prompt, type EL?KJC and press Enter. This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on

[QWTTQWVGT5QOGTGYCNNUQHVYCTGRTQITCOUOC[

block a DHCP request on newly installed adapters. If you are connecting to a wireless network at a JQVURQV

GIJQVGNEQHHGGUJQRCKTRQTVRNGCUG

contact an employee or administrator to verify their wireless network settings. D-Link DAP-2310 User Manual 71 Appendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps DGNQY

Step 1 Windows%NKEMQPStart > Settings > Control Panel > Network Connections Windows:2%NKEMQPStart > Control Panel > Network Connections Windows Vista%NKEMQPStart > Control Panel > Network and Internet > Network and Sharing Center > Manage network connections Step 2 Right-click on the Local Area Connection which represents your network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example:+HVJGTQWVGTU.#0+2CFFTGUUKUOCMG[QWT+2CFFTGUU:YJGTG:KUCPWODGT

DGVYGGPCPF/CMGUWTGVJCVVJGPWODGT[QWEJQQUGKUPQVKPWUGQPVJGPGVYQTM5GV&GHCWNV)CVGYC[VJG

UCOGCUVJG.#0+2CFFTGUUQH[QWTTQWVGT

D-Link DAP-2310 User Manual 72 Appendix B - Networking Basics Set Primary DNS the same as the LAN IP address of your router

 6JG 5GEQPFCT[ &05 KU PQV PGGFGF QT [QW OC[

enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DAP-2310 User Manual 73 Federal Communication Commission Interference Statement These limits are designed This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the radio instructions, may communications. that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

interference is no guarantee cause harmful there However, to Increase the separation between the equipment and receiver.

- Reorient or relocate the receiving antenna.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

(IC: 4216A-AP2310A1 / Model: DAP-2310A1)

(IC: 4216A-AP2310A1 / Model: DAP-2310A1)