FCC ID: KA2AP2320A1 802.11N Ceiling Mount PoE Access Point

Table of Contents Table of Contents Product Overview ........................................................4 Package Contents ...................................................4 System Requirements ..............................................4 Introduction ..............................................................5 Features ...................................................................7 Wireless Basics ...........................................................8 Standards-Based Technology .................................9 Wireless Installation Considerations ......................10 Physical Installation for Your Access Point ............11 Connect Power over Ethernet (PoE) ................12 Four Operational Modes ...........................................13 Getting Started ...........................................................14 Configuration .............................................................15 Save and Activate Settings....................................16 Basic Settings ........................................................17 Wireless ..........................................................17 Access Point mode ......................................17 WDS with AP mode .....................................19 WDS mode ...................................................21 Wireless Client mode ...................................23 Open System/Shared Key Authentication ...24 WPA/WPA2-Personal Authentication ............25 WPA/WPA2-Enterprise Authentication ..........26 802.11x Authentication ................................27 LAN .................................................................28 Advanced Settings ....................................................29 Performance ....................................................29 Multi-SSID ........................................................31 VLAN ................................................................33 VLAN List .....................................................33 Port List ........................................................34 Add/Edit VLAN .............................................35 PVID Setting .................................................36 Intrusion ...........................................................37 Schedule ..........................................................38 QoS ..................................................................39 AP Array ...........................................................41 Wireless Basic Settings ................................42 Wireless Advanced Settings ........................42 Multiple SSID & VLAN ..................................43 Advanced Functions ....................................43 Administration Settings ................................43 ARP Spoofing Prevention .................................44 DHCP Server ..................................................45 Dynamic Pool Settings .................................45 Static Pool Setting ........................................47 Current IP Mapping List ...............................49 Filters ...............................................................50 Wireless MAC ACL .......................................50 WLAN Partition .............................................51 D-Link DAP-2320 User Manual 2 Troubleshooting ........................................................70 Networking Basics ....................................................72 Check your IP address ..........................................72 Statically Assign an IP address .............................73 Technical Specifications...........................................75 Contacting Technical Support .................................77 Warranty .....................................................................78 Registration ................................................................80 Table of Contents Status ....................................................................52 Device Information ...........................................52 Client Information .............................................53 WDS Information ..............................................54 Stats .................................................................55 Ethernet ........................................................55 WLAN Traffic ................................................56 Log ...................................................................57 View Log.......................................................57 Log Settings .................................................58 Maintenance .........................................................59 Administration Settings ....................................59 Limit Administrator .......................................60 System Name Settings .................................61 Login Settings ..............................................62 Console Settings ..........................................63 SNMP Settings .............................................64 Firmware and SSL Certification Upload ................65 Configuration File Upload ......................................66 Time and Date .......................................................67 System .............................................................68 System Settings ...........................................68 Help .......................................................................69 D-Link DAP-2320 User Manual 3 Section 1 - Product Overview Product Overview Package Contents 802.11N Ceiling Mount PoE Access Point Power Adapter CAT5 Ethernet Cable CD-ROM with User Manual Install Guide Note: Using a power supply with a different voltage rating than the one included with the DAP-2320 will cause damage and void the warranty for this product. System Requirements Computers with Windows, Macintosh, or Linux-based operating systems with an installed Ethernet Adapter For configuration, the following web browsers are supported:

Microsoft Internet Explorer 6.0 and higher Mozilla Firefox 3.0 and higher Google Chrome 2.0 and higher Apple Safari 3.0 and higher D-Link DAP-2320 User Manual 4 Section 1 - Product Overview Introduction The DAP-2320 802.11n selectable AP increases productivity by allowing you to work faster and more efficiently. With the DAP-2320, bandwidth-intensive applications like graphics or multimedia will benefit significantly because large files are now able to move across the network quickly. The DAP-2320 is capable of operating in one of four different wireless networking modes: access point, WDS (Wireless Distribution System) with AP, WDS, or Wireless Client mode. Use less wiring, enjoy increased flexibility, save time and money with PoE (Power over Ethernet). With PoE, the DAP-2320 shares power and data over the CAT5 cable, making the setup of your network less expensive and more convenient. An ideal solution for quickly creating and extending a wireless local area network (WLAN) in offices or other workplaces, trade shows, and special events, the DAP-2320 provides data transfer rates up to 300Mbps. (The 802.11n standard is backwards compatible with 802.11g, and 802.11b devices.) WPA/WPA2 is offered in two options: Enterprise (used for corporations) and Personal (used for home users). WPA-Personal and WPA2-Personal are directed towards home users who do not have the server-based equipment required for user authentication. This method of authentication is similar to WEP because you define a Pre-Shared Key on the wireless router/AP. Once the pre-shared key is confirmed and satisfied at both the client and access point, access is then granted. The encryption method used is referred to as the Temporal Key Integrity Protocol (TKIP), which offers per-packet dynamic hashing. It also includes an integrity checking feature which ensures that the packets were not tampered with during wireless transmission. D-Link DAP-2320 User Manual 5 Section 1 - Product Overview WPA-Enterprise and WPA2-Enterprise are ideal for businesses that already have existing security infrastructures established. Management and security implementation can now be centralized on a server participating on the network. Utilizing 802.1X with a RADIUS (Remote Authentication Dial-in User Service) server, a network administrator can define a list of authorized users who can access the wireless LAN. When attempting to access a wireless LAN with WPA-Enterprise configured, the new client will be requested to enter a username with a password. If the new client is authorized by the administration, and enters the correct username and password, then access is granted. In the case where an employee leaves the company, the network administrator is able to remove the previous employee from the authorized list to avoid compromising the network. EAP (Extensible Authentication Protocol) is available through the Windows XP operating system. You will need to use the same type of EAP protocol on all devices in your network when using the 802.1X feature.

*Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput may vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead can lower actual data throughout rate. D-Link DAP-2320 User Manual 6 Section 1 - Product Overview Features Four different operation modes - Capable of operating in one of four different operation modes to meet your wireless networking needs: Access Point, WDS with AP, WDS, or Wireless Client. Faster wireless networking with the 802.11n standard to provide a maximum wireless signal rate of up to 300 Mbps*. Compatible with the 802.11b standard to provide a wireless data rate of up to 11Mbps, allowing you to migrate your system to the 802.11n and 802.11g standards on your own schedule without sacrificing connectivity. Compatible with the 802.11g standard to provide a wireless data rate of up to 54Mbps in the 2.4GHz frequency range. Better security with WPA - The DAP-2320 can securely connect wireless clients on the network using WPA (Wi-Fi Protected Access) to provide a much higher level of security for your data and communications than its previous versions. AP Manager II management software - The real-time display of the network's topology and APs information makes network configuration and management quick and simple. SNMP for management - The DAP-2320 is not just fast, but also supports SNMP v.3 for better network management. Superior wireless AP manager software is bundled with the DAP-2320 for network configuration and firmware upgrade. Systems administrators can also set up the DAP-2320 easily with the Web-based configuration. A D-Link D-View 6.0 module will be downloadable for network administration and real-time network traffic monitoring with D-Link D-View 6.0 software. Utilizes OFDM technology (Orthogonal Frequency Division Multiplexing). Supports 802.3af Power over Ethernet. Supports one 10/100/1000M Ethernet port. Operates in the 2.4~2.5GHz and 5.15~5.85GHz** frequency ranges. Web-based interface for managing and configuring.

*Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput may vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead can lower actual data throughout rate.

**Please note that operating frequency ranges vary depending on the regulations of individual countries and jurisdictions. The DAP-2320 is not supported in the 5.25~5.35 GHz and 5.47 ~ 5.725 GHz frequency ranges in some regions. D-Link DAP-2320 User Manual 7 Section 2 - Installation Wireless Basics D-Link wireless products are based on industry standards to provide high-speed wireless connectivity that is easy to use within your home, business or public access wireless networks. D-Link wireless products provides you with access to the data you want, whenever and wherever you want it. Enjoy the freedom that wireless networking can bring to you. WLAN use is not only increasing in both home and office environments, but in public areas as well, such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are allowing people to work and communicate more efficiently. Increased mobility and the absence of cabling and other types of fixed infrastructure have proven to be beneficial to many users. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards, allowing wireless users to use the same applications as those used on a wired network. People use WLAN technology for many different purposes:

Mobility - productivity increases when people can have access to data in any location within the operating range of their WLAN. Management decisions based on real-time information can significantly improve the efficiency of a worker. Low implementation costs - WLANs are easy to set up, manage, change and relocate. Networks that frequently change can benefit from WLAN's ease of implementation. WLANs can operate in locations where installation of wiring may be impractical. Installation and network expansion - by avoiding the complications of troublesome cables, a WLAN system can be fast and easy during installation, especially since it can eliminate the need to pull cable through walls and ceilings. Wireless technology provides more versatility by extending the network beyond the home or office. Inexpensive solution - wireless network devices are as competitively priced as conventional Ethernet network devices. The DAP-2320 saves money by providing users with multi-functionality configurable in four different modes. Scalability - Configurations can be easily changed and range from Peer-to-Peer networks, suitable for a small number of users to larger Infrastructure networks to accommodate hundreds or thousands of users, depending on the number of wireless devices deployed. D-Link DAP-2320 User Manual 8 Section 2 - Installation Standards-Based Technology The DAP-2320 Wireless Access Point utilizes the 802.11b, 802.11g, and 802.11n standards. The IEEE 802.11n standard is an extension of the 802.11b, and 802.11g standards that came before it. It increases the maximum wireless signal rate up to 300Mbps* within the 2.4GHz band, utilizing OFDM technology. This means that in most environments - within the specified range of this device - you will be able to transfer large files quickly, or even watch a movie in MPEG format over your network without noticeable delays. This technology works by transmitting high-speed digital data over a radio wave utilizing OFDM (Orthogonal Frequency Division Multiplexing) technology. OFDM works by splitting the radio signal into multiple smaller sub-signals that are then simultaneously transmitted at different frequencies to the receiver. OFDM reduces the amount of crosstalk (interference) in signal transmissions. The D-Link DAP-2320 will automatically sense the best possible connection speed to ensure the greatest possible speed and range. IEEE 802.11n offers the most advanced network security features available today, including WPA.

*Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput may vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead can lower actual data throughout rate. D-Link DAP-2320 User Manual 9 Section 2 - Installation Wireless Installation Considerations The D-Link AirPremier N wireless access point lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:

1. Keep the number of walls and ceilings between the access point and other network devices to a minimum. Each wall or ceiling can reduce your adapters range from 3-90 feet (1-30 meters). Position your devices so that the number of walls or ceilings is minimized. 2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle, it looks over 42 feet

(14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on the range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal. 4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise. 5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DAP-2320 User Manual 10 Section 2 - Installation Physical Installation for Your Access Point:(optional) Junction Box Installation:

1.Attach the bracket to the junction box. 2.attach the DAP-2320 to the mounting bracket. Solid Wall or Ceiling Installation:

1.Mount the bracket on the appropriate position on the wall or Ceiling. 2.Mount the AP to the bracket on the wall or ceiling. D-Link DAP-2320 User Manual 11 Section 2 - Installation Connect Power over Ethernet (PoE) Connect one end of an Ethernet cable (included with your access point) to the LAN port on the DAP-2320 and the other end of the Ethernet cable to either your computer or to your PoE switch. The AP can be powered on by a PoE switch or by the power adapter shipped with the AP. D-Link DAP-2320 User Manual 12 Section 2 - Installation Four Operational Modes Access Point (AP) Create a wireless LAN WDS with AP WDS Wirelessly connect multiple networks while still functioning as a wireless AP Wirelessly connect multiple networks Wireless Client AP acts as a wireless network adapter for your Ethernet-enabled device D-Link DAP-2320 User Manual 13 Section 2 - Installation Getting Started 1. You will need broadband Internet access. 2. Consult with your cable or DSL provider for proper installation of the modem. 3. Connect the cable or DSL modem to a router. See the printed Install Guide included with your router. 4. If you are connecting a desktop computer to your network, install a wireless PCI adapter into an available PCI slot on your desktop computer. 5. Install the drivers for your wireless CardBus adapter into a laptop computer. D-Link DAP-2320 User Manual 14 Section 3 - Configuration To configure the DAP-2320, use a computer that is connected to the DAP-2320 with an Ethernet cable (see the Network Layout diagram). Configuration First, disable the Access the Internet using a proxy server function. To disable this function, go to Control Panel > Internet Options > Connections > LAN Settings and uncheck the enable box. Launch your web browser. Type the IP address and http port of the DAP-2320 in the address field

(http://192.168.0.50) and press Enter. Make sure that the IP addresses of the DAP-2320 and your computer are in the same subnet. Note: If you have changed the default IP address assigned to the DAP-2320, make sure to enter the correct IP address. Enter the user name (admin) and your password. Leave the password field blank by default, and click Login. Note: If you have changed the password, make sure to enter the correct password. D-Link DAP-2320 User Manual 15 Section 3 - Configuration After successfully logging into the DAP-2320, the following screen will appear:

DAP-2320 DAP-2320 D-Link DAP-2320 Save and Activate Settings When making changes on most of the configuration screens in this section, use the each screen to save (not activate) your configuration changes. button at the bottom of You may change settings to multiple pages before activating. Once you are finished, click the Configuration button located at the top of the page and then click Save and Activate. D-Link DAP-2320 User Manual 16 Section 3 - Configuration Basic Settings Wireless Access Point mode Wireless Band: Select 2.4GHzfrom the drop-down menu. Mode:

Select Access Point from the drop-down menu. The other three choices are WDS with AP, WDS, and Wireless Client. DAP-2320 Network Name

(SSID):

SSID Visibility:

Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSIDs factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. The SSID can be up to 32 characters and is case-sensitive. Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID across the network, thus making it visible to all network users. Auto Channel Selection:

Enabling this feature automatically selects the channel that provides the best wireless performance. Enable is set by default. The channel selection process only occurs when the AP is booting up. Channel:

All devices on the network must share the same channel. To change the channel, first toggle the Auto Channel Selection setting to Disable, and then use the drop-down menu to make the desired selection. Note: The wireless adapters will automatically scan and match the wireless settings. D-Link DAP-2320 User Manual 17 Section 3 - Configuration Channel Width:

Allows you to select the channel width you would like to operate in. Select 20 MHz if you are not using any 802.11n wireless clients. Auto 20/40 MHz allows you to connect to both 802.11n and 802.11b/g wireless devices on your network. Authentication:

Use the drop-down menu to choose Open System, Shared Key, WPA-Personal, WPA-Enterprise, or 802.11x. Select Open System to communicate the key across the network. Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is enabled, this option is not available. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. Select WPA-Enterprise to secure your network with the inclusion of a RADIUS server. Select 802.11x to secure your network using 802.11x authentication. D-Link DAP-2320 User Manual 18 Section 3 - Configuration WDS with AP mode In WDS with AP mode, the DAP-2320 wirelessly connects multiple networks while still functioning as a wireless AP. Wireless Band:

Select 2.4GHz from the drop-down menu. Mode:

WDS with AP mode is selected from the drop-down menu. DAP-2320 Network Name

(SSID):

Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSIDs factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. SSID Visibility:

Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID across the network, thus making it visible to all network users. Auto Channel Selection:

Enabling this feature automatically selects the channel that will provide the best wireless performance. This feature is not supported in WDS with AP mode. The channel selection process only occurs when the AP is booting up. Channel:

All devices on the network must share the same channel. To change the channel, use the drop-down menu to make the desired selection. (Note: The wireless adapters will automatically scan and match the wireless settings.) Channel Width:

Allows you to select the channel width you would like to operate in. Select 20 MHz if you are not using any 802.11n wireless clients. Auto 20/40 MHz allows you to connect to both 802.11n and 802.11b/g wireless devices on your network. D-Link DAP-2320 User Manual 19 Section 3 - Configuration Remote AP MAC Address:

Site Survey:

Authentication:

Enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks. Click on the Scan button to search for available wireless networks, then click on the available network that you want to connect with. Use the drop-down menu to choose Open System, Shared Key, or WPA-Personal. Select Open System to communicate the key across the network. Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is enabled, this option is not available. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link DAP-2320 User Manual 20 Section 3 - Configuration WDS mode In WDS mode, the DAP-2320 wirelessly connects multiple networks, without functioning as a wireless AP. Wireless Band: Select 2.4GHz from the drop-down menu. Mode:

WDS is selected from the drop-down menu. DAP-2320 Network Name

(SSID):

Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSIDs factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. SSID Visibility:

Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID across the network, thus making it visible to all network users. Auto Channel Selection:

Enabling this feature automatically selects the channel that will provide the best wireless performance. This feature is not supported in WDS mode. Channel:

All devices on the network must share the same channel. To change the channel, use the drop-down menu to make the desired selection. Channel Width:

Use the drop-down menu to choose 20 MHz or Auto 20/40 MHz. Remote AP MAC Address:

Enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks. D-Link DAP-2320 User Manual 21 Section 3 - Configuration Site Survey:

Click on the Scan button to search for available wireless networks, then click on the available network that you want to connect with. Authentication:

Use the drop-down menu to choose Open System, Shared Key, or WPA-Personal. Select Open System to communicate the key across the network. Select Shared Key to limit communication to only those devices that share the same WEP settings. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link DAP-2320 User Manual 22 Section 3 - Configuration Wireless Band: Select 2.4GHz from the drop-down menu. Mode:

Wireless Client is selected from the drop-down menu. DAP-2320 Wireless Client mode Network Name

(SSID):

Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSIDs factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network. SSID Visibility:

This option is unavailable in Wireless Client mode. Auto Channel Selection:

Enabling this feature automatically selects the channel that will provide the best wireless performance. This feature is not supported in Wireless Client mode. Channel:

The channel used will be displayed, and matches the AP that the DAP-2320 is connected to when set to Wireless Client mode. Channel Width:

Use the drop-down menu to choose 20 MHz or Auto 20/40 MHz. Site Survey:

Click on the Scan button to search for available wireless networks, then click on the available network that you want to connect with. Use the drop-down menu to choose Open System or WPA-Personal. Authentication:

Select Open System to communicate the key across the network. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. Enable:

Check to enable clone MAC. This feature will allow you to change the MAC address of the access point to the MAC address of a client. MAC Source:

Select the MAC source from the drop-down menu. MAC Address:

Enter the MAC address that you would like to assign to the access point. D-Link DAP-2320 User Manual 23 Section 3 - Configuration Open System/Shared Key Authentication Encryption:

Use the radio button to disable or enable encryption. DAP-2320 Key Type*:

Select HEX or ASCII. Key Size:

Select 64 Bits or 128 Bits. Key Index (1-4):

Select the 1st through the 4th key to be the active key. Key:

Input up to four keys for encryption. You will select one of these keys in the Key Index drop-down menu.

**Hexadecimal (HEX) digits consist of the numbers 0-9 and the letters A-F.

*ASCII (American Standard Code for Information Interchange) is a code that represents English letters using numbers ranging from 0-127. D-Link DAP-2320 User Manual 24 Section 3 - Configuration WPA/WPA2-Personal Authentication WPA Mode:

When WPA-Personal is selected for Authentication type, you must also select a WPA mode from the drop-down menu: AUTO (WPA or WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use different algorithms. AUTO (WPA or WPA2) allows you to use both WPA and WPA2. DAP-2320 Cipher Type:

When you select WPA-Personal, you must also select AUTO, AES, or TKIP from the drop-down menu. Group Key Update:

Select the interval during which the group key will be valid. The default value of 1800 is recommended. Select Manual to enter your key (PassPhrase). Periodical Key Change:

You can select Periodical Key Change to have the access point automatically change your PassPhrase. Enter the Activate From time and the time in hours to change the key. PassPhrase:

When you select WPA-Personal, please enter a PassPhrase in the corresponding field. D-Link DAP-2320 User Manual 25 Section 3 - Configuration WPA/WPA2-Enterprise Authentication WPA Mode:

When WPA-Enterprise is selected, you must also select a WPA mode from the drop-down menu: AUTO (WPA or WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use different algorithms. AUTO (WPA or WPA2) allows you to use both WPA and WPA2. DAP-2320 Cipher Type:

When WPA-Enterprise is selected, you must also select a cipher type from the drop-down menu: Auto, AES, or TKIP. Group Key Update Interval:

Select the interval during which the group key will be valid. The recommended value is 1800. A lower interval may reduce data transfer rates. Network Access Protection:

Enable or disable Microsoft Network Access Protection. RADIUS Server:

Enter the IP address of the RADIUS server. RADIUS Port:

Enter the RADIUS port. RADIUS Secret:

Enter the RADIUS secret. D-Link DAP-2320 User Manual 26 Section 3 - Configuration 802.11x Authentication Key Update Interval:

Select the interval during which the group key will be valid (1800 is the recommended value). A lower interval may reduce data transfer rates. DAP-2320 RADIUS Server:

Enter the IP address of the RADIUS server. RADIUS Port:

Enter the RADIUS port. RADIUS Secret:

Enter the RADIUS secret. D-Link DAP-2320 User Manual 27 Section 3 - Configuration LAN LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DAP-2320. These settings may be referred to as private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet. Get IP From:

Static IP (Manual) is chosen here. Choose this option if you do not have a DHCP server in your network, or if you wish to assign a static IP address to the DAP-2320. When Dynamic IP (DHCP) is selected, the other fields here will be grayed out. Please allow about two minutes for the DHCP client to be functional once this selection is made. DAP-2320 IP Address:

The default IP address is 192.168.0.50. Assign a static IP address that is within the IP address range of your network. Subnet Mask:

Enter the subnet mask. All devices in the network must share the same subnet mask. Default Gateway:

Enter the IP address of the gateway in your network. If there is a gateway in your network, please enter an IP address within the range of your network. D-Link DAP-2320 User Manual 28 Section 3 - Configuration Advanced Settings Performance Wireless:

Use the drop-down menu to turn the wireless function On or Off. DAP-2320 Wireless Mode:

Data Rate*:

The different combination of clients that can be supported include Mixed 802.11n, 802.11g and 802.11b, Mixed 802.11g and 802.11b and 802.11n Only in the 2.4 GHz band and Mixed 802.11n only, and 802.11n Only in the 5 GHz band. Please note that when backwards compatibility is enabled for legacy (802.11g/b) clients, degradation of 802.11n (draft) wireless performance is expected. Indicate the base transfer rate of wireless adapters on the wireless LAN. The AP will adjust the base transfer rate depending on the base rate of the connected device. If there are obstacles or interference, the AP will step down the rate. This option is enabled in Mixed 802.11g and 802.11b mode (for 2.4 GHz) Only mode (for 5 GHz). The choices available are Best (Up to 54), 54, 48, 36, 24, 18, 12, 9, 6 for 5 GHz and Best (Up to 54), 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2 or 1 for 2.4 GHz.

*Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput may vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead can lower actual data throughout rate. D-Link DAP-2320 User Manual 29 Section 3 - Configuration Beacon Interval

(25-500):

DTM Interval

(1-15):

Transmit Power:

Beacons are packets sent by an access point to synchronize a wireless network. Specify a value in milliseconds. The default (100) is recommended. Setting a higher beacon interval can help to save the power of wireless clients, while setting a lower one can help a wireless client connect to an access point faster. Select a Delivery Traffic Indication Message setting between 1 and 15. The default value is 1. DTIM is a countdown inform-

ing clients of the next window for listening to broadcast and multicast messages. This setting determines the power level of the wireless transmission. Transmitting power can be adjusted to eliminate overlapping of wireless area coverage between two access points where interference is a major concern. For example, if wireless coverage is intended for half of the area, then select 50% as the option. Use the drop-down menu to select 100%, 50%, 25%, or 12.5%. WMM (Wi-Fi Multimedia):

WMM stands for Wi-Fi Multimedia. Enabling this feature will improve the user experience for audio and video applications over a Wi-Fi network. Ack Time Out

(2.4 GHZ, 64~200) or Ack Time Out

(5 GHZ, 25~200):

To effectively optimize throughput over long distance links, enter a value for Acknowledgement Time Out between 25 and 200 microseconds for 5 GHz or from 64 to 200 microseconds in the 2.4 GHz in the field provided. Short GI:

Select Enable or Disable. Enabling a short guard interval can increase throughput. However, be aware that it can also increase the error rate in some installations due to increased sensitivity to radio-frequency installations. IGMP Snooping:

Connection Limit:

Select Enable or Disable. Internet Group Management Protocol allows the AP to recognize IGMP queries and reports sent between routers and an IGMP host (wireless STA). When IGMP snooping is enabled, the AP will forward multicast packets to an IGMP host based on IGMP messages passing through the AP. Select Enable or Disable. This is an option for load balancing. This determines whether to limit the number of users accessing this device. The exact number is entered in the User Limit field below. This feature allows the user to share the wireless network traffic and the client using multiple APs. If this function is enabled, when the number of users exceeds this value, the DAP-2320 will not allow clients to associate with the AP. User Limit (0-64):

Set the maximum amount of users that are allowed access (0-64 users). To use this feature, the Connection Limit above must be enabled. For most users, a limit of 10 is recommended. The default setting is 20. D-Link DAP-2320 User Manual 30 Section 3 - Configuration Multi-SSID The device supports up to four multiple Service Set Identifiers. In the Basic > Wireless section, you can set the Primary SSID. The SSIDs factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. Enable Multi-SSID:

Band:

Index:

SSID:

SSID Visibility:

Security:

Check to enable support for multiple SSIDs. DAP-2320 This read-only value is the current band setting. You can select up to three multi-SSIDs. With the Primary SSID, you have a total of four multi-SSIDs. Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSIDs factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID across the network, thus making it visible to all network users. The Multi-SSID security can be Open System, WPA-Personal, or WPA-Enterprise. For a detailed description of the Open System parameters, please go to page 23. For a detailed description of the WPA-Personal parameters, please go to page 24. For a detailed description of the WPA-Enterprise parameters, please go to page 25. D-Link DAP-2320 User Manual 31 Section 3 - Configuration Priority:

Check the Enable Priority box at the top of this window to enable. Select the priority from the drop-down menu. WMM (Wi-Fi Multimedia):

Encryption:

Select Enable or Disable. When you select Open System, toggle between Enable and Disable. If Enable is selected, the Key Type, Key Size, Key Index (1~4), Key, and Confirm Keys must also be configured. Key Type:

Select HEX or ASCII. Key Size:

Select 64 Bits or 128 Bits. Key Index (1-4):

Select from the 1st to 4th key to be set as the active key. Key:

Input up to four keys for encryption. You will select one of these keys in the Key Index drop-down menu. WPA Mode:

When you select either WPA-Personal or WPA-Enterprise, you must also choose a WPA mode from the drop-down menu:

AUTO (WPA or WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use different algorithms. AUTO (WPA or WPA2) allows you to use both WPA and WPA2. In addition, you must configure Cipher Type and Group Key Update Interval. Cipher Type:

Select Auto, AES, or TKIP from the drop-down menu. Group Key Update Interval:

Select the interval during which the group key will be valid. The default value of 1800 seconds is recommended. PassPhrase:

When you select WPA-Personal, please enter a PassPhrase in the corresponding field. Confirm PassPhrase:

RADIUS Server:

When you select WPA-Personal, please re-enter the PassPhrase entered in the previous item in the corresponding field. When you select WPA-Enterprise, enter the IP address of the RADIUS server. In addition, you must configure RADIUS Port and RADIUS Secret. RADIUS Port:

Enter the RADIUS port. RADIUS Secret:

Enter the RADIUS secret. D-Link DAP-2320 User Manual 32 Section 3 - Configuration VLAN VLAN List The DAP-2320 supports VLANs. VLANs can be created with a Name and VID. Mgmt (TCP stack), LAN, Primary/

Multiple SSID, and WDS connection can be assigned to VLANs as they are physical ports. Any packet which enters the DAP-2320 without a VLAN tag will have a VLAN tag inserted with a PVID. The VLAN List tab displays the current VLANs. VLAN Status:

Use the radio button to toggle between Enable or Disable. Next, go to the Add/Edit VLAN tab to add or modify an item on the VLAN List tab. DAP-2320 D-Link DAP-2320 User Manual 33 Section 3 - Configuration Port List The Port List tab displays the current ports. If you want to configure the guest and internal networks on a Virtual LAN

(VLAN), the switch and DHCP server you are using must also support VLANs. As a prerequisite step, configure a port on the switch for handling VLAN tagged packets as described in the IEEE 802.1Q standard. VLAN Status:

Use the radio button to toggle to Enable. Next, go to the Add/Edit VLAN tab to add or modify an item on the VLAN List tab. DAP-2320 Port Name:

The name of the port is displayed in this column. Tag VID:

The Tagged VID is displayed in this column. Untag VID:

The Untagged VID is displayed in this column. PVID:

The Port VLAN Identifier is displayed in this column. D-Link DAP-2320 User Manual 34 Section 3 - Configuration Add/Edit VLAN The Add/Edit VLAN tab is used to configure VLANs. Once you have made the desired changes, click the Save button to let your changes take effect. VLAN Status:

Use the radio button to toggle to Enable. VLAN ID:

Provide a number between 1 and 4094 for the Internal VLAN. DAP-2320 VLAN Name:

Enter the VLAN to add or modify. D-Link DAP-2320 User Manual 35 Section 3 - Configuration PVID Setting The PVID Setting tab is used to enable/disable the Port VLAN Identifier Auto Assign Status as well as to configure various types of PVID settings. Click the Save button to let your changes take effect. VLAN Status:

Use the radio button to toggle between Enable and Disable. DAP-2320 PVID Auto Assign Status:

Use the radio button to toggle PVID auto assign status to Enable. D-Link DAP-2320 User Manual 36 Section 3 - Configuration Intrusion The Wireless Intrusion Protection window is used to set APs as All, Valid, Neighborhood, Rogue, and New. Click the Save button to let your changes take effect. AP List:

The choices include All, Valid, Neighbor, Rogue, and New. DAP-2320 Detect:

Click this button to initiate a scan of the network. D-Link DAP-2320 User Manual 37 Section 3 - Configuration Schedule The Wireless Schedule Settings window is used to add and modify scheduling rules on the device. Click the Save button to let your changes take effect. Wireless Schedule:

Use the drop-down menu to enable the devices scheduling feature. DAP-2320 Name:

Index:

SSID:

Day(s):

Enter a name for the new scheduling rule in the field provided. Select the index from the drop-down menu. Enter the name of your wireless network

(SSID). Toggle the radio button between All Week and Select Day(s). If the second option is selected, check the specific days you want the rule to be effective on. All Day(s):

Check this box to have your settings apply 24 hours a day. Start Time:

Enter the start time for your rule. If you selected All Day, this option will be greyed out. End Time:

Enter the end time for your rule. Add:

Click to add the rule to the list. Schedule Rule List:

This section will display the list of created schedules. Save:

Click the Save button to save your created rules. D-Link DAP-2320 User Manual 38 Section 3 - Configuration QoS Quality of Service (QoS) enhances the experience of using a network by prioritizing the traffic of different applications. A QoS Rule identifies a specific message flow and assigns a priority to that flow. For most applications, the priority classifiers ensure the right priorities and specific QoS Rules are not required. QoS supports overlaps between rules. If more than one rule matches a specific message flow, the rule with the highest priority will be used. QoS (Quality of Service):

Enable this option if you want to allow QoS to prioritize your traffic Priority Classifiers. DAP-2320 HTTP:

Allows the access point to recognize HTTP transfers for many common audio and video streams and prioritize them above other traffic. Such streams are frequently used by digital media players. Automatic:

When enabled, this option causes the access point to automatically attempt to prioritize traffic streams that it does not otherwise recognize, based on the behavior that the streams exhibit. This acts to de-prioritize streams that exhibit bulk transfer characteristics, such as file transfers, while leaving interactive traffic, such as gaming or VoIP, running at a normal priority. D-Link DAP-2320 User Manual 39 Section 3 - Configuration Name:

Enter a name for the new QoS rule in the field provided. Priority:

Use the drop-down menu to select the desired priority: Background (BK), Best Effort (BE), Video (VI), or Voice (VO). Protocol:

Use the drop-down menu to choose the appropriate protocol used by the messages: Any, TCP, UDP, Both, IMCP, or Other. Host 1 IP Range:

The rule applies to a flow of messages for which one computers IP address falls within the range set here. Host 1 Port Range:

The rule applies to a flow of messages for which host 1s port number is within the range set here when the Protocol is set to TCP, UDP, or Both. Host 2 IP Range:

The rule applies to a flow of messages for which the other computers IP address falls within the range set here. Host 2 Port Range:

The rule applies to a flow of messages for which host 2s port number is within the range set here when the Protocol is set to TCP, UDP, or Both. D-Link DAP-2320 User Manual 40 Section 3 - Configuration AP Array An AP array is a set of devices on a network that are organized into a single group to increase ease of management. Enable Array:

This check box allows the user to enable the AP array function. The three modes that are available are Master, Backup Master, and Slave. APs in the same array will use the same configuration. The configuration will sync the Master AP to the Slave AP and the Backup Master AP when a Slave AP and a Backup Master AP join the AP array. DAP-2320 AP Array Name:

Enter a name for the AP array you have created. AP Array Password:

Enter a password that will be used to access the AP array you have created. Scan AP Array List:

Click this button to initiate a scan of all the available APs currently on the network. AP Array List:

This table displays the current AP array status for the following parameters: Array Name, Master IP, MAC, Master, Backup Master, Slave, and Total. Current Array Members:

This table displays all the current array members. The DAP-2320 AP array feature supports up to eight AP array members. D-Link DAP-2320 User Manual 41 Section 3 - Configuration Wireless Basic Settings Network Name

(SSID):

Select this option to use a Network Name (SSID). SSID Visibility:

Select this option to enable SSID Visibility. Auto Channel Selection:

Select this option to use Auto Channel Selection. Channel Width:

Select this option to specify the Channel Width. Security Data:

Select this option to use Wireless Security. Wireless Advanced Settings Rate:

Select this option to specify the Data Rate. Beacon Interval:

Select this option to specify the Beacon Interval. DTIM Interval:

Select this option to specify the DTIM Interval. Transmit Power:

Select this option to specify the Transmit Power. WMM (Wi-Fi Multimedia):

Select this option to use WMM. Ack Time Out:

Select this option to use Ack Time Out. Short GI:

Select this option to use a Short GI. IGMP Snooping:

Select this option to enable IGMP Snooping. Link Integrity:

Select this option to use Link Integrity. Connection Limit:

Select this option to use a Connection Limit. Wireless ACL:

Select this option to use Wireless ACL. D-Link DAP-2320 User Manual 42 Section 3 - Configuration SSID:

Select this option to use an SSID. SSID Visibility:

Select this option to make the SSID Visible. Security:

Select this option to use Wireless Security. WMM:

Select this option to use WMM. VLAN:

Select this option to use VLAN. Multiple SSID & VLAN Advanced Functions Schedule Settings:

Select this option to use Scheduled Settings. QoS Settings:

Select this option to use Quality of Service. DHCP Server Settings:

Select this option to use DHCP. Log Settings:

Select this option to enable the Log Settings. Time and Date Settings:

Select this option to use the Time and Date Settings. Administration Settings Limit Administrator:

Select this option to enable Limited Administrator. System Name Settings:

Select this option to use a System Name. Login Settings:

Select this option to use Login Settings. Console Settings:

Select this option to enable Console Settings. SNMP Settings:

Select this option to enable SNMP Settings. Ping Control Settings:

Select this option to enable Ping Control. D-Link DAP-2320 User Manual 43 Section 3 - Configuration ARP Spoofing Prevention The ARP Spoofing Prevention feature allows users to add IP/MAC address mapping to prevent ARP spoofing attack. ARP Spoofing Prevention:

This check box allows you to enable the ARP spoofing prevention function. DAP-2320 Gateway IP Address:

Enter a gateway IP address. Gateway MAC Address:

Enter a gateway MAC address. D-Link DAP-2320 User Manual 44 Section 3 - Configuration DHCP Server Dynamic Pool Settings The DHCP address pool defines the range of the IP address that can be assigned to stations in the network. A Dynamic Pool allows wireless stations to receive an available IP with lease time control. If needed or required in the network, the DAP-2320 is capable of acting as a DHCP server. Function Enable/

Disable:

Dynamic Host Configuration Protocol (DHCP) assigns dynamic IP addresses to devices on the network. This protocol simplifies network management and allows new wireless devices to receive IP addresses automatically without the need to manually assign new IP addresses. Select Enable to allow the DAP-2320 to function as a DHCP server. DAP-2320 IP Assigned From:

Input the first IP address available for assignment on your network. The Range of Pool (1-254):

Enter the number of IP addresses available for assignment. IP addresses are increments of the IP address specified in the IP Assigned From field. Subnet Mask:

All devices in the network must have the same subnet mask to communicate. Enter the submask for the network here. Gateway:

Enter the IP address of the gateway on the network. WINS:

Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that determines the IP address of a network computer that has a dynamically assigned IP address. D-Link DAP-2320 User Manual 45 Section 3 - Configuration DNS:

Enter the IP address of the Domain Name System (DNS) server. The DNS server translates domain names such as www.dlink.com into IP addresses. Domain Name:

Enter the domain name of the network, if applicable. (An example of a domain name is: www.dlink.com.) Lease Time

(60-31536000 sec):

The lease time is the period of time before the DHCP server will assign new IP addresses. D-Link DAP-2320 User Manual 46 Section 3 - Configuration Static Pool Setting The DHCP address pool defines the range of IP addresses that can be assigned to stations on the network. A static pool allows specific wireless stations to receive a fixed IP without time control. Function Enable/

Disable:

Assigned IP:

DAP-2320 Dynamic Host Configuration Protocol

(DHCP) assigns IP addresses to wireless devices on the network. This protocol simplifies network management and allows new wireless devices to receive IP addresses automatically without the need to manually assign IP addresses. Select Enable to allow the DAP-2320 to function as a DHCP server. Use the Static Pool Settings to assign the same IP address to a device every time you start up. The IP addresses assigned in the Static Pool list must NOT be in the same IP range as the Dynamic Pool. After you have assigned a static IP address to a device via its MAC address, click Save; the device will appear in the Assigned Static Pool at the bottom of the screen. You can edit or delete the device in this list. Assigned MAC Address:

Enter the MAC address of the device requesting association here. Subnet Mask:

Define the submask of the IP address specified in the IP Assigned From field. D-Link DAP-2320 User Manual 47 Section 3 - Configuration Gateway:

Specify the Gateway address for the wireless network. WINS:

Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that determines the IP address of a network computer with a dynamically assigned IP address, if applicable. DNS:

Enter the Domain Name System (DNS) server address for the wireless network. The DNS server translates domain names such as www.dlink.com into IP addresses. Domain Name:

Specify the domain name for the network. D-Link DAP-2320 User Manual 48 Section 3 - Configuration Current IP Mapping List This window displays information about the current assigned DHCP dynamic and static IP address pools. This information is available when you enable DHCP server on the AP and assign dynamic and static IP address pools. Current DHCP Dynamic Profile:

These are IP address pools the DHCP server has assigned using the dynamic pool setting. DAP-2320 Host Name:

The host name of a device on the network that is assigned an IP address from the DHCP dynamic pool. Binding MAC Address:

The MAC address of a device on the network that is assigned an IP address from the DHCP dynamic pool. Assigned IP Address:

The current corresponding DHCP-assigned IP address of the device. Lease Time:

The length of time that the dynamic IP address will be valid. Current DHCP Static Pools:

These are the IP address pools of the DHCP server assigned through the static pool settings. Host Name:

The host name of a device on the network that is assigned an IP address from the DHCP dynamic pool. Binding MAC Address:

Assigned IP Address:

The MAC address of a device on the network that is within the DHCP static IP address pool. The current corresponding DHCP-assigned static IP address of the device. D-Link DAP-2320 User Manual 49 Section 3 - Configuration Filters Wireless MAC ACL Wireless Band:

Displays the current wireless band rate. Access Control List:

MAC Address:

Select Disable to disable the filters function. DAP-2320 Select Accept to accept only those devices with MAC addresses in the Access Control List. All other devices not on the list will be rejected. Select Reject to reject the devices with MAC addresses on the Access Control List. All other devices not on the list will be accepted. Enter each MAC address that you wish to include in your filter list, and click Save. MAC Address List:

When you enter a MAC address, it appears in this list. Highlight a MAC address and click Delete to remove it from this list. Upload ACL File:

You may create an ACL list and upload it to the access point instead of manually entering the information. Once created, click the Browse button and locate your file. Select it and then click Upload. Download ACL File:

Click Download to export the ACL to a file on your computer. D-Link DAP-2320 User Manual 50 Section 3 - Configuration Wireless Band:

Displays the current wireless band rate. Link Integrity:

Select Enable or Disable. WLAN Partition DAP-2320 Ethernet to WLAN Access:

The default is Enable. When disabled, all data from the Ethernet to associated wireless devices will be blocked. Wireless devices can still send data to the Ethernet. Internal Station Connection:

The default value is Enable, which allows stations to inter-communicate by connecting to a target AP. When disabled, wireless stations cannot exchange data through the AP. D-Link DAP-2320 User Manual 51 Section 3 - Configuration Status Device Information Device Information:

This read-only window displays the configuration settings of the DAP-2320, including the firmware version and the device's MAC address. DAP-2320 D-Link DAP-2320 User Manual 52 Section 3 - Configuration Client Information:

This window displays the wireless client information for clients currently connected to the DAP-2320. DAP-2320 Client Information The following information is available for each client communicating with the DAP-2320. SSID:

Displays the SSID of the client. MAC:

Displays the MAC address of the client. Band:

Displays the wireless band that the client is connected to. Authentication:

Displays the type of authentication being used. Signal:

Displays the client's signal strength. Power Saving Mode:

Displays the status of the power saving feature. D-Link DAP-2320 User Manual 53 Section 3 - Configuration WDS Information WDS Information:

This window displays the Wireless Distribution System information for clients currently connected to the DAP-2320. DAP-2320 The following information is available for each client communicating with the DAP-2320. Name:

Displays the SSID of the client. MAC:

Displays the MAC address of the client. Authentication:

Displays the type of authentication being used. Signal:

Status:

Displays the client's signal strength. Displays the status of the power saving feature. D-Link DAP-2320 User Manual 54 Section 3 - Configuration Stats Ethernet Ethernet Traffic Statistics:

This page displays transmitted and received count statistics for packets and bytes. DAP-2320 D-Link DAP-2320 User Manual 55 Section 3 - Configuration WLAN Traffic Statistics:

This page displays wireless network statistics for data throughput, transmitted and received frames, and frame errors. DAP-2320 WLAN Traffic D-Link DAP-2320 User Manual 56 Section 3 - Configuration Log View Log DAP-2320 View Log:

The APs embedded memory displays system and network messages including a time stamp and message type. The log information includes but is not limited to the following items: cold start AP, upgrading firmware, client associate and disassociate with AP, and web login. The web page holds up to 500 logs. D-Link DAP-2320 User Manual 57 Section 3 - Configuration Log Server/IP Address:

Enter the IP address of the server you would like to send the DAP-2320 log to. DAP-2320 Log Settings Log Type:

Check the box for the type of activity you want to log. There are three types: System Activity, Wireless Activity, and Notice. Email Notification:

Check to enable Email notification. Outgoing Mail Server (SMTP):

Select the SMTP server from the drop-down menu. Authentication:

Check to enable authentication. SSL / TLS:

Check to enable SSL/TLS authentication. From Email Address:

Enter the From email address. To Email Address:

Enter the destination email address. Email Server Address:

Enter the Email Server Address. SMTP Port:

Enter the SMTP port. Username:

Enter your email username. Password:

Enter your email password. Confirm Password:

Enter your email password again. Schedule:

Select when to send the log to your email

(in hours). You will receive an email when the log is full too. D-Link DAP-2320 User Manual 58 Section 3 - Configuration Maintenance Administration Settings Check one or more of the five main categories to display the various hidden administrator parameters and settings displayed on the next five pages. DAP-2320 D-Link DAP-2320 User Manual 59 Section 3 - Configuration Limit Administrator Each of the five main categories display various hidden administrator parameters and settings. Limit Administrator VLAN ID:

Check the box provided and the enter the specific VLAN ID that the administrator will be allowed to log in from. DAP-2320 Limit Administrator IP:

Check to enable the Limit Administrator IP address. IP Range:

Enter the IP address range that the administrator will be allowed to log in from and then click the Add button. D-Link DAP-2320 User Manual 60 Section 3 - Configuration System Name Settings Each of the five main categories display various hidden administrator parameters and settings. System Name:

The name of the device. The default name is D-Link DAP-2320. DAP-2320 Location:

The physical location of the device, e.g. 72nd Floor, D-Link HQ. D-Link DAP-2320 D-Link DAP-2320 User Manual 61 Section 3 - Configuration Login Settings Each of the five main categories display various hidden administrator parameters and settings. User Name:

Enter a user name. The default is admin. DAP-2320 Old Password:

When changing your password, enter the old password here. New Password:

When changing your password, enter the new password here. The password is case-sensitive. A is a different character than a. The length should be between 0 and 12 characters. Confirm Password:

Enter the new password a second time for confirmation purposes. D-Link DAP-2320 User Manual 62 Section 3 - Configuration Console Settings Each of the five main categories display various hidden administrator parameters and settings. Status:

Status is enabled by default. Uncheck the box to disable the console. DAP-2320 Console Protocol:

Select the type of protocol you would like to use, Telnet or SSH. Timeout:

Set to 1 Min, 3 Mins, 5 Mins, 10 Mins, 15 Mins or Never. D-Link DAP-2320 User Manual 63 Section 3 - Configuration SNMP Settings Each of the five main categories display various hidden administrator parameters and settings. Status:

Check the box to enable the SNMP functions. This option is disabled by default. DAP-2320 Public Community String:

Enter the public SNMP community string. Private Community String:

Enter the private SNMP community string. Trap Status:

Check the box to enable Trap Status. Trap Server IP:

Enter the Trap Server IP address. D-Link DAP-2320 User Manual 64 Section 3 - Configuration Firmware and SSL Certification Upload This page allows the user to perform a firmware upgrade. A Firmware upgrade is a function that upgrade the running software used by the access point. This is a useful feature that prevents future bugs and allows for new features to be added to this product. Please go to your local D-Link website to see if there is a newer version firmware available. DAP-2320 Upload Firmware From Local Hard Drive:

Language Pack Upgrade:

The current firmware version is displayed above the file location field. After downloading the most recent version of firmware for the DAP-2320 from http://support.dlink.com to your local computer, use the Browse button to locate the firmware file on your computer. Click Upload to update the firmware version. Please dont turn the power off while upgrading. You may load a language pack to display the utility in another language. Click Browse to locate the language pack file on your local computer. After selecting and opening the file, click Upload to upload the file to the DAP-2320. Upload SSL Certification From Local Hard Drive:

Click Browse to locate the SSL Certification file on your local computer. After selecting and opening the file, click Upload to upload the file to the DAP-2320. D-Link DAP-2320 User Manual 65 Section 3 - Configuration Configuration File Upload DAP-2320 Upload File:

Download Configuration File:

Click the Browse button to locate a previously saved configuration file on your local computer. After selecting the file, click Upload to apply the configuration settings to the DAP-2320. Click Download to save the current DAP-2320 configuration to your local computer. Note that if you save one configuration with the administrators password now, after resetting your DAP-2320, and then updating to this saved configuration file, the password will be gone. D-Link DAP-2320 User Manual 66 Section 3 - Configuration Time and Date Current Time:

Displays the current time and date settings. Time Zone:

Use the drop-down menu to select your correct Time Zone. DAP-2320 Enable Daylight Saving:

Check the box to Enable Daylight Saving Time. Daylight Saving Offset:

Use the drop-down menu to select the correct Daylight Saving period. Daylight Saving Dates:

Use the drop-down menu to select the correct Daylight Saving offset. Enable NTP Server:

Check to enable the AP to get system time from an NTP server. NTP Server:

Enter the NTP server IP address. Set the Date and Time Manually:

You can either manually set the time for your AP here, or you can click the Copy Your Computers Time Settings button to copy the time from the computer you are using

(Make sure that the computers time is set correctly). D-Link DAP-2320 User Manual 67 Section 3 - Configuration System System Settings Restart the Device:

Click Restart to restart the DAP-2320. Restore to Factory Default Settings:

Click Restore to restore the DAP-2320 back to factory default settings. DAP-2320 Clear Language Pack:

Click Clear to remove any loaded language packs. D-Link DAP-2320 User Manual 68 Section 3 - Configuration Help:

Scroll down the Help page for topics and explanations. Help DAP-2320 D-Link DAP-2320 User Manual 69 Section 6 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DAP-2320. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows XP. If you have a different operating system, the screenshots on your computer will look similar to the following examples.) 1. Why cant I access the web-based configuration utility?

When entering the IP address of the D-Link access point (192.168.0.50 for example), you are not connecting to a website on the Internet nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. Make sure you have an updated Java-enabled web browser. We recommend the following:

- Microsoft Internet Explorer 6.0 and higher

- Mozilla Firefox 3.0 and higher

- Google Chrome 2.0 and higher

- Apple Safari 3.0 and higher Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on. Disable any internet security software running on the computer. Software firewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and Windows XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DAP-2320 User Manual 70 Section 6 - Troubleshooting Configure your Internet settings:

Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults. Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times. Close your web browser (if open) and open it. Access the web management. Open your web browser and enter the IP address of your D-Link access point in the address bar. This should open the login page for your the web management. If you still cannot access the configuration, unplug the power to the access point for 10 seconds and plug back in. Wait about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer. 2. What can I do if I forgot my password?

If you forgot your password, you must reset your access point. Unfortunately, this process will change all your settings back to the factory defaults. To reset the access point, locate the reset button (hole) on the rear panel of the unit. With the access point powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the access point will go through its reboot process. Wait about 30 seconds to access the access point. The default IP address is 192.168.0.50. When logging in, the username is admin and leave the password box empty. D-Link DAP-2320 User Manual 71 Appendix B - Networking Basics Networking Basics Check your IP address After you install your network adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > Run. In the run box type cmd and click OK. At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. If you are connecting to a wireless network at a hotspot (e.g. hotel, coffee shop, airport), please contact an employee or administrator to verify their wireless network settings. D-Link DAP-2320 User Manual 72 Appendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:

Step 1 Windows 2000: Click on Start > Settings > Control Panel > Network Connections Windows XP: Click on Start > Control Panel > Network Connections Windows Vista: Click on Start > Control Panel > Network and Internet > Network and Sharing Center >

Manage network connections Step 2 Right-click on the Local Area Connection which represents your network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the routers LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1). D-Link DAP-2320 User Manual 73 Appendix B - Networking Basics Set Primary DNS the same as the LAN IP address of your router

(192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DAP-2320 User Manual 74 Appendix C - Technical Specifications Standards IEEE 802.11b IEEE 802.11g IEEE 802.11n IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3af Network Management Secure HTTP (HTTPS) Web Browser interface HTTP AP Manager II SNMP Support D-View Module Command Line Interface Telnet Secure SSH Telnet Private MIB Data Rates*

For 802.11b:

For 802.11g:

11, 5.5, 2, and 1 Mbps 54, 48, 36, 24, 18, 12, 9, and 6 Mbps Technical Specifications For 802.11n:

HT20/HT40 144.4/300, 130/270, 117/243, 104/216, 78/162, 66/135, 58.5/121.5, 52/108, 39/81, 26/54, 19.5/40.5, 12/27, and 6.5/13.5 Mbps Security WPA Personal/Enterprise WPA2 Personal/Enterprise WEP 64-/128-bit SSID Broadcast Disable MAC Address Access Control Operating Voltage 48V DC +/- 10% for PoE or 5V/2.5A Radio and Modulation Type For 802.11b:

DQPSK, DBPSK, DSSS, and CCK Operating Frequency**

For 802.11b/g:

2.4 ~ 2.4835 GHz For 802.11n:

2.4 GHz Band: 2.4 ~ 2.4835 GHz

* Maximum wireless signal rate derived from IEEE Standard 802.11g and Draft 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. D-Link DAP-2320 User Manual 75 Certifications FCC Class B CE IC C-Tick CSA WiFi Dimensions L = 198 mm W = 120 mm H = 32 mm Appendix C - Technical Specifications Antenna Type PIFA antenna with 2dBi gain Transmit Output Power (at Antenna Connector) 29.25 dBm @ 2.4GHz EIRP 19.24 dBm @ 2.4GHz Max Power Consumption 10.5W LEDs Power LAN 2.4 GHz Temperature Operating: 0C to 40C Storing: -20C to 65C Humidity Operating: 10%~90% (non-condensing) Storing: 5%~95% (non-condensing)

**Please note that operating frequency ranges vary depending on the regulations of individual countries and jurisdictions. The DAP-2320 isnt supported in the 5.25~5.35 GHz and 5.47 ~ 5.725 GHz frequency ranges in some regions. D-Link DAP-2320 User Manual 76 Appendix D - Contacting Technical Support Contacting Technical Support U.S. and Canadian customers can contact D-Link technical support through our web site or by phone. Before you contact technical support, please have the following ready:

Model number of the product (e.g. DAP-2320) Hardware Revision (located on the label on the bottom of the access point (e.g. rev A1)) Serial Number (s/n number located on the label on the bottom of the access point). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues. For customers within the United States:

Phone Support:

(877) 354-6555 Internet Support:

http://support.dlink.com For customers within Canada:

Phone Support:

(877) 354-6560 Internet Support:

http://support.dlink.ca D-Link DAP-2320 User Manual 77 Appendix E - Warranty Warranty Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

is connected.

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. D-Link DAP-2320 User Manual 78 Appendix E - Warranty This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This Industry Canada statement:

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 dIndustrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Declaration dexposition aux radiations:Cet equipement est conforme aux limites dexposition aux rayonnements IC etablies pour un environnement non controle. Cet equipement doit etre installe et utilise avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. D-Link DAP-2320 User Manual 79 Appendix E - Warranty Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. D-Link DAP-2320 User Manual 80 Version 1.0 March 12, 2012