all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 3.54 MiB | / February 01 2019 | |||
1 2 | Cover Letter(s) | / February 01 2019 | ||||||
1 2 | Attestation Statements | / February 01 2019 | ||||||
1 2 | Block Diagram | Block Diagram | December 24 2018 | confidential | ||||
1 2 | Cover Letter(s) | / February 01 2019 | ||||||
1 2 | Cover Letter(s) | / February 01 2019 | ||||||
1 2 | External Photos | / February 01 2019 | ||||||
1 2 | Cover Letter(s) | / February 01 2019 | ||||||
1 2 | Internal Photos | / February 01 2019 | ||||||
1 2 | ID Label/Location Info | / February 01 2019 | ||||||
1 2 | ID Label/Location Info | / February 01 2019 | ||||||
1 2 | Operational Description | Operational Description | December 24 2018 | confidential | ||||
1 2 | RF Exposure Info | / February 01 2019 | ||||||
1 2 | Cover Letter(s) | / February 01 2019 | ||||||
1 2 | Schematics | Schematics | December 24 2018 | confidential | ||||
1 2 | Software Operational Description | SDR Software/Security Inf | December 24 2018 | confidential | ||||
1 2 | Test Setup Photos | / February 01 2019 | ||||||
1 2 | Test Report | / February 01 2019 | ||||||
1 2 | Test Report | / February 01 2019 | ||||||
1 2 | Test Report | / February 01 2019 | ||||||
1 2 | Cover Letter(s) | / February 01 2019 | ||||||
1 2 | Attestation Statements | / February 01 2019 | ||||||
1 2 | Cover Letter(s) | / February 01 2019 | ||||||
1 2 | Cover Letter(s) | / February 01 2019 | ||||||
1 2 | RF Exposure Info | / February 01 2019 | ||||||
1 2 | Cover Letter(s) | / February 01 2019 | ||||||
1 2 | Test Report | / February 01 2019 | ||||||
1 2 | Test Report | / February 01 2019 | ||||||
1 2 | Test Setup Photos | / February 01 2019 | ||||||
1 2 | Test Setup Photos | / February 01 2019 |
1 2 | User Manual | Users Manual | 3.54 MiB | / February 01 2019 |
Version 1.00| 12/20/2018 User Manual AC1300 Mesh-Enabled Smart Wi-Fi Router DIR-1360 D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Preface Manual Revisions Revision 1.00 Date Description December 20, 2018 Initial A1 release Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Apple, Apple logo, Safari, iPhone, iPad, iPod touch and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries. App StoreTM is a service mark of Apple Inc. Chrome browser, Google Play and Android are trademarks of Google Inc. Internet Explorer, Windows and the Windows logo are trademarks of the Microsoft group of companies. Copyright 2018 by D-Link Corporation, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc. Power Usage This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. It can also be turned off through a power switch to save energy when it is not needed. Network Standby: 4.87 watts Switched Off: 0.06 watts D-Link DIR-1360 User Manual i Table of Contents Product Overview ..............................................................1 Package Contents ......................................................................... 1 System Requirements ................................................................. 2 Introduction ................................................................................... 3 Features ............................................................................................ 4 Hardware Overview ..................................................................... 5 LED Indicators ........................................................................ 5 Back Panel ............................................................................... 6 Installation .........................................................................7 Before you Begin ........................................................................... 7 Wireless Installation Considerations ...................................... 8 Hardware Setup ............................................................................ 9 Completing Setup ......................................................................12 Setup Wizard ........................................................................13 D-Link Wi-Fi App .................................................................17 Configuration ...................................................................19 Home ..............................................................................................20 Internet ...................................................................................20 DIR-1360.................................................................................21 Connected Clients ..............................................................22 Settings ..........................................................................................23 Wizard .....................................................................................23 Internet ...................................................................................23 IPv6 .....................................................................................33 VLAN ...................................................................................53 Wireless ..................................................................................54 Guest Zone .......................................................................57 Network ..................................................................................58 Features ..........................................................................................60 QoS Engine............................................................................60 Firewall ...................................................................................61 IPv4/IPv6 Rules ...............................................................63 Port Forwarding ..................................................................64 Virtual Server ...................................................................65 Website Filter ........................................................................66 Static Routes .........................................................................67 IPv6 .....................................................................................68 Dynamic DNS .......................................................................69 IPv6 Host ...........................................................................70 Management ........................................................................71 Time & Schedule .................................................................71 Time ....................................................................................71 Schedule ...........................................................................72 System Log ............................................................................73 System Admin ......................................................................75 System ...............................................................................76 Upgrade .................................................................................77 Statistics .................................................................................78 Connect a Wireless Client to your Router ......................79 WPS Button ...................................................................................79 Windows 10 ................................................................................80 D-Link DIR-1360 User Manual ii Table of Contents Windows 8 ...................................................................................82 WPA/WPA2 ............................................................................82 Windows 7 ...................................................................................84 WPA/WPA2 ............................................................................84 WPS ..........................................................................................87 Windows Vista ............................................................................91 WPA/WPA2 ............................................................................92 Troubleshooting ..............................................................94 Wireless Basics .................................................................98 What is Wireless? .........................................................................99 Tips ................................................................................................ 101 Wireless Modes ......................................................................... 102 Networking Basics .........................................................103 Check your IP address ............................................................ 103 Wireless Security ......................................................... 104 What is WPA? ................................................................ 104 Technical Specifications ................................................105 Regulatory Information ................................................106 D-Link DIR-1360 User Manual iii Table of Contents Product Overview Package Contents Quick Installation Document DIR-1360 Ethernet Cable Power Adapter If any of the above items are missing or damaged, please contact your local reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-1360 will cause damage and void the warranty for this product. D-Link DIR-1360 User Manual 1 Section 1 - Product Overview System Requirements Network Requirements An Ethernet-based cable or DSL modem IEEE 802.11ac/n/g/b/a wireless clients 10/100/1000 Ethernet Computer with the following:
Windows, Macintosh, or Linux-based operating system An installed Ethernet adapter Web-based Configuration Utility Requirements Browser Requirements:
Internet Explorer 10 or higher Firefox 28 or higher Safari 6 or higher Chrome 28 or higher Windows Users: Make sure you have Javascript enabled. Wi-Fi App Requirements iPhone/iPad Android smartphone or tablet. (Please refer to the mobile app's store page to check whether your device is compatible) D-Link DIR-1360 User Manual 2 Section 1 - Product Overview Introduction The D-Link DIR-1360 AC1300 Mesh-Enabled Smart Wi-Fi Router shares your Internet connection over a blazing-fast Gigabit Wireless AC connection of up to 1300 Mbps (Up to 867 Mbps on the 5 GHz Wireless AC band and up to 400 Mbps on the 2.4 GHz Wireless N band)1 by using advanced AC beamforming technology to significantly outperform 802.11n and other 802.11ac devices. Equipped with a Gigabit WAN/Internet port and four Gigabit LAN ports to provide wired speeds of up to 10 times faster than standard 10/100 ports, the DIR-1360 lets you experience networking at its best no matter if you're using wireless or wired Ethernet. Featuring four antennas and a 2x2 + 2x2 Multiple In Multiple Out (MIMO) hardware and software configuration, the DIR-1360 offers better data rates, fewer dead-spots, more coverage, and better reliability. Operating exclusively in the 5 GHz band, the DIR-1360's 802.11ac wireless connections bypasses the crowded 2.4 GHz band, giving you faster speeds while still maintaining backward compatibility with older 802.11n/g/b devices through the 2.4 GHz band. A stronger Wi-Fi signal means you can install more wireless surveillance cameras, baby monitors, sensors, and alarms in the places where you need them. Add these features together, and the DIR-1360 lets you expand your Smart Home by bringing Wi-Fi to places your old signal cant reach. The DIR-1360's Smart Connect technology makes connecting to wireless networks easy automating multiple networks. Since the introduction of 5 GHz multi-band wireless technology, choosing between 5 GHz or 2.4 GHz networks to optimize range and speed involved guesswork. Smart Connect eliminates the guesswork by unifying both bands into a single network name. Behind the scenes, when a connection is initiated, the DIR-1360's advanced algorithms determine the best band for your device and automatically distributes each device to its optimal band providing a faster, more reliable, and hassle-free experience for all users. 1 Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11b, 802.11g, 802.11n and 802.11ac specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. D-Link DIR-1360 User Manual 3 Section 1 - Product Overview Features Superior Wireless Networking - The DIR-1360 provides Gigabit wireless speeds of up to a combined 1300 Mbps (867 Mbps 802.11ac 5 GHz, plus 400 Mbps 802.11n 2.4 GHz)1. These speeds rival wired connections and allow users enjoy online activities such as HD video communication, online gaming, and Voice over IP telephony lag-free from anywhere in your home while still offering full 802.11n/g/b backward compatibility. Extreme Wired LAN and WAN Networking - With four 10/100/1000 Gigabit Ethernet LAN ports, and a 10/100/1000 Gigabit Ethernet WAN port, the DIR-1360 has an enormous amount of bandwidth to take full advantage of the fastest broadband speeds available. IPv6 Support - The DIR-1360 fully supports IPv6 and includes support for a variety of IPv6 connection types including: SLAAC/DHCPv6, 6to4, 6rd, Static IPv6, IPv6 PPPoE, IPv6 in IPv4 tunneling, and local connectivity. Smart Connect - Creates a single wireless SSID for your devices. Behind the scenes, the DIR-1360 automatically determines whether to connect a device to the 2.4 or 5 GHz network, thereby providing the best speed and range for each device and optimally distributing devices to each network. Advanced Firewall Features - The web-based user interface displays a number of advanced network management features. Easily apply content filtering based on MAC address, URL, and/or domain name. Schedule these filters to be active on certain days or for a duration of hours or minutes. Encrypted Multiple/Concurrent Sessions - The DIR-1360 supports VPN passthroughs. It supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-1360 can access corporate networks through encrypted channels. User-friendly Setup Wizard - Using its easy-to-use web-based user interface or D-Link Wi-Fi App, the DIR-1360 lets you quickly configure and secure your router to your specific settings in minutes. 1 Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n and 802.11ac specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link DIR-1360 User Manual 4 Section 1 - Product Overview Hardware Overview LED Indicators 5 4 3 2 1 Power LED Internet LED A solid blue light indicates a proper connection to the power supply. The light will be solid orange during boot up. A solid blue light indicates a connection on the Internet port. If the LED is orange, the router cannot connect to the Internet. Wireless (2.4 GHz LED) A solid blue light indicates that the 2.4 GHz wireless band is enabled. Wireless (5 GHz LED) A solid blue light indicates that the 5 GHz wireless band is enabled. Connect a USB storage device to share files over the network. USB 3.0 Port 1 2 3 4 5 D-Link DIR-1360 User Manual 5 Section 1 - Product Overview Hardware Overview Back Panel 1 2 3 4 5 6 1 2 3 4 5 6 Reset Button Insert a paperclip in the hole to press the recessed button, hold for 10 seconds, and release to reset the router to default settings Gigabit LAN Ports (1- 4) Connect Ethernet devices such as computers, switches, storage (NAS) devices, and game consoles. Gigabit WAN Port Using an Ethernet cable, connect your broadband modem to this port. WPS Button Power Connector Power Button Press to start the WPS process and automatically create an encrypted connection to a WPS client. Connect the supplied power adapter here. Press the power button to power the device on or off. D-Link DIR-1360 User Manual 6 Section 1 - Product Overview Installation This section will walk you through the installation of the DIR-1360. Before you Begin Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, attic, or garage. This is to allow proper ventilation and prevent overheating. Configure the router with the computer that was last connected directly to your Internet connection. Verify that it is connected to the Internet before connecting additional devices. If your Internet Service provider (ISP) provided you with a modem/router combo, you will need to set it to bridge mode so the router can work properly. Please contact your ISP or refer to the user manual for your modem/router device. If connecting to a DSL modem, make sure to have your DSL service information provided by your Internet Service Provider handy. This information is likely to include your DSL account's Username and Password. Your ISP may also supply you with additional WAN configuration settings which might be necessary to establish a connection. If you are connecting a considerable amount of networking equipment, it may be a good idea to take the time to label each cable or take a picture of your existing setup before making any changes. If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoET, BroadJump, or EnterNet 300 from your computer or you will not be able to connect to the Internet. D-Link DIR-1360 User Manual 7 Section 3 - Installation Wireless Installation Considerations The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum -
each wall or ceiling can reduce your adapters range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (0.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick!
Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. Building materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise. If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone is not in use. D-Link DIR-1360 User Manual 8 Section 3 - Installation Hardware Setup 1. The DIR-1360 is designed to give you the fastest, most stable network connection possible. In order to maximize performance, fully extend the antennas into a 105-degree angle (middle notch) to provide optimal wireless coverage. Keep the router in an open area for better wireless coverage. 105 2. Position your DIR-1360 near your Internet-connected modem. Place it in an open area for better wireless coverage. Modem DIR-1360 3. Turn off and unplug the power and Ethernet cable to your cable or DSL broadband modem. This is required. In some cases, you may need to turn it off for up to five minutes. DIR-1360 Modem D-Link DIR-1360 User Manual 9 Section 3 - Installation 4. Use the included Ethernet cable to connect your modem to the yellow port labeled INTERNET on the router. DIR-1360 Modem 5. Turn on or plug your modem back in and wait approximately one minute before proceeding onward. DIR-1360 Modem 6. Connect the supplied power adapter to the router and a power outlet, press the power button, and wait approximately one minute until the LED indicator on the front of the device changes from orange to solid blue. DIR-1360 Modem D-Link DIR-1360 User Manual 10 Section 3 - Installation 7. If you are configuring the DIR-1360 wirelessly from a PC, connect to a Wi-Fi network printed on the included Wi-Fi Configuration Card. You can also find the Wi-Fi network names and passwords printed on the label attached to the bottom your router. Quick Install Card DIR-1360 Modem If you are configuring the DIR-1360 from a PC with a wired Ethernet connection, plug one end of an Ethernet cable into the port labeled 1 on the back of the router, and the other end into the Ethernet port on your computer. DIR-1360 Modem 8. If you are connecting to a broadband service that uses a dynamic connection (not PPPoE), you may be online already. Try opening a web browser and connecting to a website. If the website does not load, proceed to Setup Wizard on page 13. D-Link DIR-1360 User Manual 11 Section 3 - Installation Completing Setup There are different ways you can configure your router to connect to the Internet and connect to your clients:
D-Link Setup Wizard - This wizard will launch when you log into the router for the first time. Refer to Setup Wizard on page 13. D-Link Wi-Fi App - Use your Android device, iPhone or IPad to configure your router. Refer to D-Link Wi-Fi App on page 17. Manual Setup - Log in to the router and manually configure your router. Refer to Configuration on page 19. D-Link DIR-1360 User Manual 12 Section 3 - Installation Setup Wizard If this is your first time installing the router, open your web browser and enter http://dlinkrouter.local./ in the address bar. Alternatively, enter the IP address of the router (default: http://192.168.0.1). The wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Click Next to continue. Please wait while your router detects your Internet connection type. If the router detects your Internet connection, you may need to enter your ISP information such as username and password. If the router does not detect a valid Internet connection, a list of connection types to choose from will be displayed. Select your Internet connection type (this information can be obtained from your Internet Service Provider) and click Next to continue. D-Link DIR-1360 User Manual 13 Section 3 - Installation Setup Wizard (continued) If the router detected or you selected PPPoE, enter your PPPoE username and password and click Next to continue. Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. If the router detected or you selected Static, enter the IP and DNS settings supplied by your ISP. Click Next to continue. D-Link DIR-1360 User Manual 14 Section 3 - Installation Setup Wizard (continued) Create a Wi-Fi password (between 8-63 characters). Your wireless clients will need to have this passphrase or key entered to be able to connect to your wireless network. Click Next to continue. Note: The DIR-1360's Smart Connect feature presents a single wireless network. When connecting clients to an extension network, they will be automatically added to the best band, either 2.4 GHz or 5 GHz. To disable the Smart Connect feature and individually configure 2.4 GHz and 5 GHz networks, refer to Wireless on page 54. To help protect your router, please enter a new password. You will be prompted for this password every time you want to use the routers web configuration utility. Click Next to continue. D-Link DIR-1360 User Manual 15 Section 3 - Installation Setup Wizard (continued) You will be presented with a summary of your settings. Click Next to finalize the settings or Back to make changes. At the end of the wizard, you will be presented with a final summary of your settings. Click Finish to close the wizard. Congratulations, your device has been successfully configured!
D-Link DIR-1360 User Manual 16 Section 3 - Installation D-Link Wi-Fi App The D-Link Wi-Fi App allows you to install and configure your DIR-1360 AC1300 Mesh-Enabled Smart Wi-Fi Router from your mobile device. Note: The screenshots may be different depending on your mobile devices OS version. The following steps show the Android interface of the D-Link Wi-Fi app. If you are using an iOS device, the appearance may be different from that of the screenshots, but the process is the same. Step 1 Search for the free D-Link Wi-Fi App on the Apple App Store or Google Play and install. You can also scan the QR code on the right, which will take you to the respective D-Link Wi-Fi app store page directly. Step 2 Launch the D-Link Wi-Fi App from the Home screen of your device. Step 3 Click on the Install Your Device Button at the bottom of the screen. (Or click on the Menu button on the top left of the app and do the same.) D-Link Wi-Fi D-Link DIR-1360 User Manual 17 Section 3 - Installation D-Link Wi-Fi App (continued) Step 4 Select from list of options the device you want to install. If you do not see your device listed choose "Others" then tap NEXT. Step 5 You will now be guided through a step-by-step process for setting up your device. Simply follow the on-screen instructions to complete the installation and DIR-1360 configuration process. D-Link DIR-1360 User Manual 18 Section 3 - Installation Configuration To access the configuration utility, open a web-browser such as Internet Explorer and enter http://dlinkrouter.local./ or you may also connect by typing the IP address of the router (by default this is http://192.168.0.1) in the address bar. Enter your password. If you previously followed the setup wizard, please use the admin password you entered during the wizard. Otherwise, leave the password blank. Click Log In to proceed. Note: If you cannot remember your password and cannot log in, press and hold the recessed reset button for longer than 10 seconds to restore the router to its default settings. The routers home page will open displaying its current connection status. The bar at the top of the page has quick access to Settings and Management functions. You may quickly jump back Home at any time. Note: The system will automatically log out after a period of inactivity. D-Link DIR-1360 User Manual 19 Section 4 - Configuration Home The Home page displays the current status of the router in the form of an interactive diagram. You can click each icon to display information about each part of the network at the bottom of the screen. The menu bar at the top of the page will allow you to quickly navigate to other pages. The Home page displays whether or not the router is currently connected to the Internet. If it is disconnected, click Click to repair to bring up the setup wizard, refer to Setup Wizard on page 13 for more information. Internet To bring up more details about your Internet connection, click on the Internet icon. Click IPv4 or IPv6 to see details of the IPv4 connection and IPv6 connection respectively. Click Release IP Address to disconnect from the Internet. If you do this and wish to reconnect, click Renew. To reconfigure the Internet settings, refer to Internet on page 23. D-Link DIR-1360 User Manual 20 Section 4 - Configuration DIR-1360 Click on the DIR-1360 icon to view details about the router and its wireless settings. Here you can see the routers current Wi-Fi network name and password, as well as the router's MAC address, IPv4 address, and IPv6 address. To reconfigure the network settings, either click Go to settings in the center, or click Settings (at the top of the page) and then Network on the menu that appears. Refer to Network on page 58 for more information. To reconfigure the wireless settings, either click Go to settings, on the lower right, or click Settings (at the top of the page) and then Wireless on the menu that appears. Refer to Wireless on page 54 for more information. D-Link DIR-1360 User Manual 21 Section 4 - Configuration Connected Clients Click on the Connected Clients icon to view details about the router and its wireless settings. On this page you can see all the clients currently connected to the router, and their IP addresses. To edit each clients settings, click the pencil icon on the client you want to edit. Name: Enter a custom name for this client. Vendor: Displays the vendor of the device. MAC Address: Displays the MAC address of the device. IP Address: Displays the current IP address of this client. Reserve IP: Enable to reserve this IP address for this client. IP Address
(Reserved):
Specify an IP address for the DIR-1360's DHCP server to assign. Parental Control: Allow or Block access to the router. Click Save when you are done. D-Link DIR-1360 User Manual 22 Section 4 - Configuration Settings Wizard In the Settings menu on the bar on the top of the page, click Wizard to open the setup wizard. This is the same wizard that appears when you start the router for the first time. Refer to Setup Wizard on page 13 for details. In the Settings menu on the bar on the top of the page, click Internet to see the Internet configuration options. Internet My Internet Connection Is:
Choose your Internet connection type from the drop-down menu. You will be presented with the appropriate options for your connection type. Click Advanced Settings... to expand the list and see all of the options. For Dynamic IP (DHCP) refer to page 24. For Static IP refer to page 25. For PPPoE refer to page 26. For PPTP refer to page 28. For L2TP refer to page 30. For DS-Lite refer to page 32. To configure an IPv6 connection, click the IPv6 link. Refer to page 33. D-Link DIR-1360 User Manual 23 Section 4 - Configuration Dynamic IP (DHCP) Select Dynamic IP (DHCP) to obtain IP address information automatically from your Internet Service Provider (ISP). Select this option if your ISP does not specify an IP address to use. Advanced Settings Host Name: The host name is optional but may be required by some ISPs. Leave it blank if you are not sure. Primary DNS Server:
Enter the primary DNS server IP address assigned by your ISP. This address is usually obtained automatically from your ISP. Secondary DNS Server:
Enter the secondary DNS server IP address assigned by your ISP. This address is usually obtained automatically from your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP (Default is AUTO). MAC Address Clone:
The default MAC address is set to the Internet ports physical interface MAC address on the router. You can use the drop-down menu to replace the Internet ports MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-1360 User Manual 24 Section 4 - Configuration Static IP Select Static IP if your IP information is provided by your Internet Service Provider (ISP). IP Address: Enter the IP address provided by your ISP. Subnet Mask: Enter the subnet mask provided by your ISP. Default Gateway: Enter the default gateway address provided by your ISP. Primary DNS Server:
Enter the primary DNS server IP address assigned by your ISP. Advanced Settings Secondary DNS Server:
Enter the secondary DNS server IP address assigned by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto. MAC Address Clone:
The default MAC address is set to the Internet ports physical interface MAC address on the router. You can use the drop-down menu to replace the Internet ports MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-1360 User Manual 25 Section 4 - Configuration PPPoE Select PPPoE if your ISP provides and requires you to enter a PPPoE username and password in order to connect to the Internet. Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Reconnect Mode: Select either Always on, On Demand, or Manual. Maximum Idle Time:
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, select Always on as the reconnect mode. Advanced Settings Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP. Dynamic IP Service Name: Enter the ISP service name (optional). Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server IP address assigned by your ISP. Enter the secondary DNS server IP address assigned by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto. D-Link DIR-1360 User Manual 26 Section 4 - Configuration PPPoE (continued) MAC Address Clone:
The default MAC address is set to the Internet ports physical interface MAC address on the router. You can use the drop-down menu to replace the Internet ports MAC address with the MAC address of a connected client. Static IP IP Address: Enter the IP address provided by your ISP. Service Name: Enter the ISP service name (optional). Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server IP address assigned by your ISP. Enter the secondary DNS server IP address assigned by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto. MAC Address Clone:
The default MAC address is set to the Internet ports physical interface MAC address on the router. You can use the drop-down menu to replace the Internet ports MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-1360 User Manual 27 Section 4 - Configuration PPTP Choose PPTP (Point-to-Point-Tunneling Protocol) if your Internet Service Provider (ISP) uses a PPTP connection. Your ISP will provide you with a username and password. PPTP Server IP Address:
Enter the PPTP server IP address provided by your ISP. Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Reconnect Mode: Select either Always on, On demand, or Manual. Maximum Idle Time:
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, select Always on as the reconnect mode. Advanced Settings Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP. Dynamic IP Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server IP address assigned by your ISP. Enter the secondary DNS server IP address assigned by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto. D-Link DIR-1360 User Manual 28 Section 4 - Configuration PPTP (continued) Static IP PPTP IP Address: Enter the IP address provided by your ISP. PPTP Subnet Mask:
PPTP Gateway IP Address:
Primary DNS Server:
Secondary DNS Server:
Enter the subnet mask provided by your ISP. Enter the gateway IP address provided by your ISP. Enter the primary DNS server IP address assigned by your ISP. Enter the secondary DNS server IP address assigned by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto. Click Save when you are done. D-Link DIR-1360 User Manual 29 Section 4 - Configuration L2TP Choose L2TP (Layer 2 Tunneling Protocol) if your Internet Service Provider
(ISP) uses a L2TP connection. Your ISP will provide you with a username and password. L2TP Server: Enter the L2TP server IP address provided by your ISP. Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Reconnect Mode: Select either Always on, On demand, or Manual. Maximum Idle Time:
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, select Always on as the reconnect mode. Advanced Settings Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP. Dynamic IP Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server IP address assigned by your ISP. Enter the secondary DNS server IP address assigned by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto. D-Link DIR-1360 User Manual 30 Section 4 - Configuration L2TP (continued) Static IP L2TP IP Address: Enter the IP address provided by your ISP. L2TP Subnet Mask:
L2TP Gateway IP Address:
Primary DNS Server:
Secondary DNS Server:
Enter the subnet mask provided by your ISP. Enter the gateway IP address provided by your ISP. Enter the primary DNS server IP address assigned by your ISP. Enter the secondary DNS server IP address assigned by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto. Click Save when you are done. D-Link DIR-1360 User Manual 31 Section 4 - Configuration DS-Lite DS-Lite is an IPV4/IPv6 hybrid connection type. After selecting DS-Lite, the following parameters will be available for configuration:
Advanced Settings DS-Lite Configuration:
Select DS-Lite DHCPv6 Option to let the router allocate the AFTR IPv6 address automatically. Select Manual Configuration to enter the AFTR IPv6 address manually. DS-Lite DHCPv6 B4 IPv6 Address: Enter the B4 IPv4 address value used here. WAN IPv6 Address:
Once connected, the WAN IPv6 address will be displayed here. IPv6 WAN Default Gateway:
Once connected, the IPv6 WAN default gateway address will be displayed here. Manual AFTR IPv6 Address:
Enter the AFTR IPv6 address used here. B4 IPv6 Address: Enter the B4 IPv4 address value used here. WAN IPv6 Address:
Once connected, the WAN IPv6 address will be displayed here. IPv6 WAN Default Gateway:
Once connected, the IPv6 WAN default gateway address will be displayed here. Click Save when you are done. D-Link DIR-1360 User Manual 32 Section 4 - Configuration IPv6 To configure an IPv6 connection, click the IPv6 link. To return to the IPv4 settings, click IPv4. My Internet Connection Is:
Choose your IPv6 connection type from the drop-down menu. You will be presented with the appropriate options for your connection type. Click Advanced Settings... to expand the list and see all of the options. For Auto Detection refer to page 34. For Static IPv6 refer to page 36. For Auto Configuration (SLAAC/DHCPv6) refer to page 38. For PPPoE refer to page 41. For IPv6 in IPv4 Tunnel refer to page 45. For 6 to 4 refer to page 48. For 6rd refer to page 50. For Local Connectivity Only refer to page 52. D-Link DIR-1360 User Manual 33 Section 4 - Configuration Auto Detection Select Auto Detection to automatically detect the IPv6 connection method used by your Internet Service Provider (ISP). If Auto Detection fails, you can manually select another IPv6 connection type. IPv6 DNS Settings DNS Type: Select either Obtain DNS server address automatically or Use the following DNS address. If Use the following DNS address is selected:
Primary DNS Server:
If you selected Use the following DNS address above, enter the primary DNS server address. Secondary DNS Server:
If you selected Use the following DNS address above, enter the secondary DNS server address. LAN IPv6 Address Settings Enable DHCP-PD: Enable or disable DHCP Prefix Delegation. LAN IPv6 Link-
Local Address:
Displays the routers LAN link-local address. If Enable DHCP-PD is disabled, these additional parameters are available for configuration:
LAN IPv6 Address: Enter a valid LAN IPv6 address. LAN IPv6 Link-
Local Address:
Displays the routers LAN link-local address. D-Link DIR-1360 User Manual 34 Section 4 - Configuration Auto Detection (continued) Advanced Settings - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment:
Enable Automatic DHCP-PD in LAN:
Autoconfiguration Type:
Enable or disable the Automatic IPv6 Address Assignment feature. Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface. Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information. Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6. If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router Advertisement Lifetime:
Enter the router advertisement lifetime (in minutes). If you selected Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address Range (Start):
IPv6 Address Range (End):
Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. Click Save when you are done. D-Link DIR-1360 User Manual 35 Section 4 - Configuration Select Static IP if your IPv6 information is provided by your Internet Service Provider (ISP). Static IPv6 IPv6 DNS Settings If Use the following DNS address is selected for DNS Type:
Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server address. Enter the secondary DNS server address. LAN IPv6 Address Settings If Enable DHCP-PD is disabled these additional parameters are available for configuration:
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN IPv6 Link-
Local Address:
Displays the routers LAN link-local address. Advanced Settings - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment:
Enable or disable the Automatic IPv6 Address Assignment feature. Autoconfiguration Type:
Router Advertisement Lifetime:
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6. Enter the router advertisement lifetime (in minutes). D-Link DIR-1360 User Manual 36 Section 4 - Configuration Static IPv6 (continued) If you selected Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address Range (Start):
IPv6 Address Range (End):
Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. Click Save when you are done. D-Link DIR-1360 User Manual 37 Section 4 - Configuration Auto Configuration (SLAAC/DHCPv6) Select Auto Configuration if your ISP assigns your IPv6 address when your router requests one from the ISPs server. Some ISPs require you to adjust settings on your side before your router can connect to the IPv6 Internet. IPv6 DNS Settings DNS Type: Select either Obtain DNS server address automatically or Use the following DNS address. If Use the following DNS address is selected:
Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server address. Enter the secondary DNS server address. LAN IPv6 Address Settings Enable DHCP-PD: Enable or disable prefix delegation services. LAN IPv6 Link-
Local Address:
Displays the routers LAN link-local address. If Enable DHCP-PD is disabled, these additional parameters are available for configuration:
LAN IPv6 Address: Enter a valid LAN IPv6 address. LAN IPv6 Link-
Local Address:
Displays the routers LAN link-local address. D-Link DIR-1360 User Manual 38 Section 4 - Configuration Auto Configuration (SLAAC/DHCPv6) (continued) Advanced Settings - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment:
Enable or disable the Automatic IPv6 Address Assignment feature. If DHCP-PD is enabled in LAN IPv6 Address Settings:
Enable Automatic DHCP-PD in LAN:
Autoconfiguration Type:
Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface. Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information. Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6. If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router Advertisement Lifetime:
Enter the router advertisement lifetime (in minutes). If you selected Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address Range (Start):
IPv6 Address Range (End):
Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. D-Link DIR-1360 User Manual 39 Section 4 - Configuration Auto Configuration (SLAAC/DHCPv6) (continued) If DHCP-PD is disabled in LAN IPv6 Address Settings and SLAAC+Stateless DHCP or SLAAC+RDNSS is chosen as the Autoconfiguration Type:
Router Advertisement Lifetime:
Enter the router advertisement lifetime (in minutes). If DHCP-PD is disabled in LAN IPv6 Address Settings and Stateful DHCPv6 is chosen as the Autoconfiguration Type:
IPv6 Address Range (Start):
IPv6 Address Range (End):
IPv6 Address Lifetime:
Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. Enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link DIR-1360 User Manual 40 Section 4 - Configuration PPPoE Select PPPoE if your ISP provides and requires you to enter a PPPoE username and password in order to connect to the Internet. PPPoE Session: Choose Share with IPv4 to re-use your IPv4 PPPoE username and password, or Create a new session. Address Mode: Select Static IP if your ISP assigned you an IP address. In most cases, select Dynamic IP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. If you selected Static IP as the Address Mode and Share with IPv4 as the PPPoE Session:
IP Address: Enter the IP address provided by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. If you selected Create a new session as the PPPoE Session:
Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Address Mode: Select either Dynamic IP or Static IP. Service Name: Enter the ISP service name (optional). Reconnect Mode: Select either Always On or Manual. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. D-Link DIR-1360 User Manual 41 Section 4 - Configuration PPPoE (continued) If you selected Static IP as the Address Mode and Create a new session as the PPPoE Session:
IP Address: Enter the IP address provided by your ISP Service Name: Enter the ISP service name (optional). Reconnect Mode: Select either Always-on or Manual. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. IPv6 DNS Settings DNS Type: Select either Obtain DNS server address automatically or Use the following DNS address. If Use the following DNS address is selected:
Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server address. Enter the secondary DNS server address. LAN IPv6 Address Settings Enable DHCP-PD: Enable or disable prefix delegation services. This option is only available if you selected Dynamic IP for address mode. LAN IPv6 Link-
Local Address:
Displays the routers LAN link-local address. D-Link DIR-1360 User Manual 42 Section 4 - Configuration PPPoE (continued) If Enable DHCP-PD is disabled these additional parameters are available for configuration:
LAN IPv6 Address:
If DHCP-PD disabled or static address mode is selected, enter the LAN
(local) IPv6 address for the router. LAN IPv6 Link-
Local Address:
Displays the routers LAN link-local address. Advanced Settings - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment:
Enable or disable the Automatic IPv6 Address Assignment feature. If DHCP-PD is enabled in LAN IPv6 Address Settings:
Enable Automatic DHCP-PD in LAN:
Autoconfiguration Type:
Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface. Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information. Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6. If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router Advertisement Lifetime:
Enter the router advertisement lifetime (in minutes). D-Link DIR-1360 User Manual 43 Section 4 - Configuration PPPoE (continued) If you selected Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address Range (Start):
IPv6 Address Range (End):
Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. If DHCP-PD is disabled in LAN IPv6 Address Settings:
IPv6 Address Range (Start):
IPv6 Address Range (End):
IPv6 Address Lifetime:
Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. Enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link DIR-1360 User Manual 44 Section 4 - Configuration IPv6 in IPv4 Tunnel The user can configure the IPv6 connection to run in IPv4 Tunnel mode. IPv6 over IPv4 tunnelling encapsulates IPv6 packets in IPv4 packets so that IPv6 packets can be sent over an IPv4 infrastructure. Enter the IPv4 remote address you will use. Enter the IPv6 remote address you will use. Displays the current local IPv4 address. Enter the IPv6 local address you will use. Enter the subnet prefix length supplied by your ISP. Remote IPv4 Address:
Remote IPv6 Address:
Local IPv4 Address:
Local IPv6 Address:
Subnet Prefix Length:
IPv6 DNS Settings DNS Type: Select either Obtain DNS server address automatically or Use the following DNS address. If Use the following DNS address is selected:
Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server address. Enter the secondary DNS server address. D-Link DIR-1360 User Manual 45 Section 4 - Configuration IPv6 in IPv4 Tunnel (continued) LAN IPv6 Address Settings Enable DHCP-PD: Enable or disable prefix delegation services. This option is only available if you selected Dynamic IP for address mode. LAN IPv6 Link-
Local Address:
Displays the routers LAN link-local address. If Enable DHCP-PD is disabled, these additional parameters are available for configuration:
LAN IPv6 Address:
If DHCP-PD disabled or static address mode is selected, enter the LAN
(local) IPv6 address for the router. LAN IPv6 Link-
Local Address:
Displays the routers LAN link-local address. Advanced Settings - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment:
Enable or disable the Automatic IPv6 Address Assignment feature. If DHCP-PD is enabled in LAN IPv6 Address Settings:
Enable Automatic DHCP-PD in LAN:
Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface. Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information. Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6. Autoconfiguration Type:
D-Link DIR-1360 User Manual 46 Section 4 - Configuration IPv6 in IPv4 Tunnel (continued) If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router Advertisement Lifetime:
Enter the router advertisement lifetime (in minutes). If you selected Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address Range (Start):
IPv6 Address Range (End):
Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. If DHCP-PD is disabled in LAN IPv6 Address Settings and SLAAC+Stateless DHCP or SLAAC+RDNSS is chosen as the Autoconfiguration Type:
Router Advertisement Lifetime:
Enter the router advertisement lifetime (in minutes). If DHCP-PD is disabled in LAN IPv6 Address Settings and Stateful DHCPv6 is chosen as the Autoconfiguration Type:
IPv6 Address Range (Start):
IPv6 Address Range (End):
IPv6 Address Lifetime:
Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. Enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link DIR-1360 User Manual 47 Section 4 - Configuration 6to4 In this section the user can configure the IPv6 6 to 4 connection settings. 6to4 is an IPv6 address assignment and automatic tunneling technology that is used to provide unicast IPv6 connectivity between IPv6 sites and hosts across the IPv4 Internet. 6to4 Address: Displays the 6 to 4 address. 6to4 Relay: Enter the 6 to 4 relay supplied by your ISP. Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server address. Enter the secondary DNS server address. LAN IPv6 Address Settings LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN IPv6 Link-
Local Address:
Displays the routers LAN link-local address. D-Link DIR-1360 User Manual 48 Section 4 - Configuration 6to4 (continued) Advanced Settings - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment:
Autoconfiguration Type:
Enable or disable the Automatic IPv6 Address Assignment feature. Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6. If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router Advertisement Lifetime:
Enter the router advertisement lifetime (in minutes). If you selected Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address Range (Start):
IPv6 Address Range (End):
IPv6 Address Lifetime:
Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. Enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link DIR-1360 User Manual 49 Section 4 - Configuration In this section the user can configure the IPv6 6rd connection settings. 6rd Assign IPv6 Prefix: Currently unsupported. Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server address. Enter the secondary DNS server address. 6rd Manual Configuration Enable Hub and Spoke Mode:
Enable this option if you want to minimize the number of routes to the destination by using a hub and spoke method of networking. 6rd Configuration: Choose the 6rd DHCPv4 Option to automatically discover and populate the data values, or Manual Configuration to enter the settings yourself. If you selected Manual configuration 6rd IPv6 Prefix: Enter the 6rd IPv6 prefix and mask length supplied by your ISP. WAN IPv4 Address Displays the routers IPv4 address. 6rd Border Relay IPv4 Address:
Enter the 6rd border relay IPv4 address settings supplied by your ISP. LAN IPv6 Address Settings LAN IPv6 Address: Displays the routers LAN IPv6 Address link-local address. LAN IPv6 Link-
Local Address:
Displays the routers LAN link-local address. D-Link DIR-1360 User Manual 50 Section 4 - Configuration 6rd (continued) Advanced Settings - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment:
Autoconfiguration Type:
Enable or disable the Automatic IPv6 Address Assignment feature. Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6. If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router Advertisement Lifetime:
Enter the router advertisement lifetime (in minutes). If you selected Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address Range (Start):
IPv6 Address Range (End):
IPv6 Address Lifetime:
Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. Enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link DIR-1360 User Manual 51 Section 4 - Configuration Local Connectivity Only allows you to set up an IPv6 connection that will not connect to the Internet. Local Connectivity Only Advanced Settings IPv6 ULA Settings Enable ULA: Click here to enable Unique Local IPv6 Unicast Addresses settings. Use Default ULA Prefix:
Enable this option to use the default ULA prefix. If you selected Enable ULA and disabled Default ULA Prefix:
ULA Prefix: Enter your own ULA prefix. Current IPv6 ULA Settings Current ULA Prefix:
Displays the current ULA prefix. LAN IPv6 ULA: Displays the LAN's IPv6 ULA. Click Save when you are done. D-Link DIR-1360 User Manual 52 Section 4 - Configuration VLAN VLAN allows for services such as Triple-Play to be used, and divides a network into segments that can only be accessed by other devices in the same VLAN. In the Settings menu on the bar on the top of the page, click Internet, then click the VLAN link. Triple-Play Status: Click to enable or disable the Triple-Play VLAN feature. If Status is enabled:
Internet VLAN ID Enter the VLAN ID for your Internet connection, as provided by your ISP. IPTV VLAN ID Enter the VLAN ID for your IPTV service, as provided by your ISP. VOIP VLAN ID: Enter the VLAN ID for your VoIP network, as provided by your ISP. Interface Traffic Type Setting LAN 1-4, Wireless, Guest Zone:
From the drop-down menu, you can select the type of connection
(Internet, IPTV, or Voice over IP) coming from the WAN connection to each interface on the DIR-1360. Click Save when you are done. D-Link DIR-1360 User Manual 53 Section 4 - Configuration Wireless From this page you can configure your wireless network settings. Smart Connect Smart Connect: Enable or disable the Smart Connect Feature. When enabled, only a few configuration options are available to simplify configuration. Wi-Fi Name (SSID): Create a name for your wireless network using up to 32 characters. Password: Create a password to use for wireless security. Wireless clients will need to enter this password to successfully connect to the network. Advanced Settings Security Mode: Choose None or WPA/WPA2-Personal (recommended). Transmission Power:
Select the desired wireless transmission power. Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 72 for more information. Wi-Fi Protected Setup The easiest way to connect your wireless devices to the router is with Wi-Fi Protected Setup
(WPS). Using WPS-PIN is disabled by default due to security vulnerabilities. WPS-PBC Status: Enable or disable WPS-PBC (Push Button Configuration) fuctionality. WPS-PIN Status: Enable or disable WPS-PIN fuctionality. Refer to the next page if you wish to disable Smart Connect or click Save when you are done. D-Link DIR-1360 User Manual 54 Section 4 - Configuration Wireless - Smart Connect Disabled If Smart Connect is disabled the following options are available:
2.4GHz / 5GHz Status: Enable or disable the 2.4 GHz / 5 GHz wireless network. Wi-Fi Name (SSID): Create a name for your wireless network using up to 32 characters. Password: Create a password to use for wireless security. Advanced Settings Security Mode: Choose None or WPA/WPA2-Personal (recommended). 802.11 Mode
(2.4 GHz):
Select the desired wireless networking standards to use. The available options for the 2.4 GHz wireless network are Mixed 802.11b/g/n, Mixed 802.11g/n, 802.11n only. 802.11 Mode
(5 GHz):
Select the desired wireless networking standards to use. The available options for the 5 GHz wireless network are Mixed 802.11a/n/ac, Mixed 802.11n/ac, 802.11ac only, Mixed 802.11a/n, Mixed 802.11n only, or 802.11a only. Wi-Fi Channel: Select the desired channel. The default is Auto (recommended). Transmission Power:
Select the desired wireless transmission power. Channel Width
(2.4 GHz):
Select Auto 20/40 if you are using both 802.11n and non-802.11n devices, or select 20 MHz if you are not using any 802.11n devices. Channel Width
(5 GHz):
Select Auto 20/40/80 if you are using 802.11ac, 802.11n, and 802.11a devices, select Auto 20/40 if you are using 802.11n and 802.11a devices, or select 20 MHz if you are only using 802.11a devices. D-Link DIR-1360 User Manual 55 Section 4 - Configuration Enable or disable HT20/40 Coexistence. HT20/40 Coexistence:
(2.4 GHz):
Visibility Status: The default setting is Visible. Select Invisible if you do not want to broadcast the SSID of your wireless network. Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 72 for more information. Wi-Fi Protected Setup The easiest way to connect your wireless devices to the router is with Wi-Fi Protected Setup
(WPS). Using WPS-PIN disabled by default due to security vulnerabilities. WPS-PBC Status: Enable or disable WPS-PBC (Push Button Configuration) functionality. WPS-PIN Status: Enable or disable WPS-PIN functionality. Click Save when you are done. D-Link DIR-1360 User Manual 56 Section 4 - Configuration Guest Zone The Guest Zone feature will allow you to create temporary zones that can be used by guests to access the Internet. These zones will be separate from your main wireless network. You may configure different zones for the 2.4 GHz and 5 GHz wireless bands. Note: If Smart Connect is enabled, Guest Zone is unavailable. In the Settings menu on the bar on the top of the page, click Wireless, then click the Guest Zone link. 2.4 GHz / 5 GHz Status: Enable or disable the 2.4 GHz / 5 GHz wireless network. Wi-Fi Name (SSID): Create a name for your wireless network using up to 32 characters. Password: Create a password to use for wireless security. Home Network Access Internet Access Only:
Enabling this option will confine connectivity to the Internet, preventing guests from accessing other local network devices. Click Save when you are done. D-Link DIR-1360 User Manual 57 Section 4 - Configuration Network This section will allow you to change the local network settings of the router and to configure the DHCP settings. In the Settings menu on the bar on the top of the page, click Network. Click Advanced Settings... to expand the list and see all of the options. Network Settings LAN IP Address: Enter the IP address of the router. The default IP address is 192.168.0.1. If you change the IP address, once you click Save, you will need to enter the new IP address in your browser to get back into the configuration utility. Subnet Mask: Enter the subnet mask of the router. The default subnet mask is 255.255.255.0. Management Link:
The default address to access the routers configuration is http://dlinkrouter.local/ Here, you can replace dlinkrouter with a name of your choice. Local Domain Name:
Enter the domain name (optional). Enable DNS Relay: Disable to transfer the DNS server information from your ISP to your computers. If enabled, your computers will use the router for a DNS server. D-Link DIR-1360 User Manual 58 Section 4 - Configuration Network (continued) DHCP Server Status: Enable or disable the DHCP server. DHCP IP Address Range:
Enter the starting and ending IP addresses for the DHCP servers IP assignment. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. DHCP Lease Time: Enter the length of time for the IP address lease in minutes. Always Broadcast: Enable this feature to broadcast your network's DHCP server to LAN/
WLAN clients. Advanced Settings WAN Port Speed: You may set the port speed of the Internet port to 10 Mbps, 100 Mbps, 1000 Mbps, or Auto (recommended). UPnP: Enable or disable Universal Plug and Play (UPnP). UPnP provides compatibility with networking equipment, software, and peripherals. IPv4 Multicast Stream:
Enable to allow IPv4 multicast traffic to pass through the router from the Internet. IPv6 Multicast Stream:
Enable to allow IPv6 multicast traffic to pass through the router from the Internet. Click Save when you are done. D-Link DIR-1360 User Manual 59 Section 4 - Configuration Features QoS Engine This Quality of Service (QoS) Engine will allow you to prioritize particular clients over others, so that those clients receive higher bandwidth. For example, if one client is streaming a movie and another is downloading a non-
urgent file, you might wish to assign the former device a higher priority than the latter so that the movie streaming is not disrupted by the traffic of the other devices on the network. In the Features menu on the bar on the top of the page, click QoS Engine. Under Connected Clients, you will see device cards representing each connected client. If some are off-screen, you can use the < and > buttons to scroll through the cards. A maximum of one device can be assigned Highest priority. A maximum of two devices can be assigned High priority. A maximum of eight devices can be assigned Medium priority. If no devices are explicitly assigned a priority, they will all be treated with equal priority. If some devices are not assigned a priority and others are, the unassigned devices will be treated with the lowest priority. To assign a priority level to a device, drag the device card from the All Devices list over an empty slot and release the mouse button. The card will remain in the slot. If you want to remove a priority assignment from a device and return it to the All Devices list, click the cross icon in the top right of the device card. Click Save when you are done. D-Link DIR-1360 User Manual 60 Section 4 - Configuration Firewall The routers firewall protects your network from malicious attacks over the Internet. In the Features menu on the bar on the top of the page, click Firewall. Click Advanced Settings... to expand the list and see all of the options. Enable DMZ: Enable or disable Demilitarized Zone (DMZ). This completely exposes the client to threats over the Internet, and is not recommended in ordinary situations. DMZ IP Address:
If you enabled DMZ, enter the IP address of the client you wish to expose, or use the drop-down menu to quickly select it. Enable SPI IPv4: Enabling Stateful Packet Inspection (SPI) helps to prevent cyber attacks by validating that the traffic passing through the session conforms to the protocol. Enable Anti-Spoof Checking:
Enable this feature to help protect your network from certain kinds of spoofing attacks. IPv6 Simple Security:
IPv6 Ingress Filtering:
Enable or disable IPv6 simple security. Enable or disable IPv6 ingress filtering. D-Link DIR-1360 User Manual 61 Section 4 - Configuration Firewall Settings (continued) Advanced Settings - Application Level Gateway (ALG) Configuration PPTP: Allows multiple machines on the LAN to connect to their corporate network using the PPTP protocol. IPSec (VPN): Allows multiple VPN clients to connect to their corporate network using IPSec. Some VPN clients support traversal of IPSec through NAT. This Application Level Gateway (ALG) may interfere with the operation of such VPN clients. If you are having trouble connecting with your corporate network, try turning this ALG off. Please check with the system administrator of your corporate network whether your VPN client supports NAT traversal. RTSP: Allows applications that uses Real Time Streaming Protocol (RTSP) to receive streaming media from the Internet. SIP: Allows devices and applications using VoIP (Voice over IP) to communicate across NAT. Some VoIP applications and devices have the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. Click Save when you are done. D-Link DIR-1360 User Manual 62 Section 4 - Configuration IPv4/IPv6 Rules The IPv4/IPv6 Rules section is an advanced option that lets you configure what kind of traffic is allowed to pass through the network. To configure the IPv4 rules, from the Firewall Settings page click IPv4 Rules. To configure IPv6 rules, from the Firewall Settings page click IPv6 Rules. To return to the main Firewall Settings page, click Advanced. To begin, use the drop-down menu to select whether you want to ALLOW or DENY the rules you create. You can also choose to turn filtering OFF. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rule button. Click Save when you are done. If you edit or create a rule, the following options will appear:
Name: Enter a name for the rule. Source IP Address Range:
Enter the source IP address range that the rule will apply to, and using the drop-down menu, specify whether it is a WAN or LAN IP address. Destination IP Address Range:
Enter the destination IP address range that the rule will apply to, and using the drop-down menu, specify whether it is a WAN or LAN IP address. Protocol & Port Range:
Select the protocol of the traffic to allow or deny (Any, TCP, or UDP) and then enter the range of ports that the rule will apply to. Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Refer to Schedule on page 72 for more information. Click Save when you are done. D-Link DIR-1360 User Manual 63 Section 4 - Configuration Port Forwarding Port forwarding allows you to specify a port or range of ports to open for specific devices on the network. This might be necessary for certain applications to connect through the router. In the Features menu on the bar on the top of the page, click Port Forwarding. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rule button. Click Save when you are done. If you edit or create a rule, the following options will appear:
Name: Enter a name for the rule. Local IP: Enter the IP address of the computer on your local network that you want to allow the incoming service to. Alternatively, select the device from the drop-down menu. TCP Port: Enter the TCP ports that you want to open. You can enter a single port or a range of ports. Separate ports with a comma (for example:
24,1009,3000-4000). UDP Port: Enter the UDP ports that you want to open. You can enter a single port or a range of ports. Separate ports with a comma (for example:
24,1009,3000-4000). Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 72 for more information. Click Save when you are done. D-Link DIR-1360 User Manual 64 Section 4 - Configuration Virtual Server The virtual server allows you to specify a single public port on your router for redirection to an internal LAN IP address and Private LAN port. To configure the virtual server, from the Port Forwarding page click Virtual Server. To return to the main Port Forwarding page, click Port Forwarding. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following options will appear:
Name: Enter a name for the rule. Alternatively, select the protocol/Application from the drop-down menu. Local IP: Enter the IP address of the computer on your local network that you want to allow the incoming service to. Alternatively, select the device from the drop-down menu. Protocol: Select the protocol of the traffic to allow or deny (TCP, UDP, Both, or Other). Protocol Number:
If you entered Other above, enter the protocol number. External Port: Enter the public port you want to open. Internal Port: Enter the private port you want to open. Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 72 for more information. Click Save when you are done. D-Link DIR-1360 User Manual 65 Section 4 - Configuration Website Filter The website filter settings allow you to block access to certain web sites. You can either create a list of sites to block, or create a list of sites to allow (with all other sites being blocked). In the Features menu on the bar on the top of the page, click Website Filter. If you want to create a list of sites to block, select DENY client access to ONLY these sites from the drop-down menu. All other sites will be accessible. If you want to specify a list of sites to allow, select ALLOW clients access to ONLY these sites from the drop-down menu. All other sites will be blocked. You may specify a maximum of twenty-four web sites. To add a new site to the list, click Add Rule. Next, under Website URL/Domain enter the URL or domain. If you wish to remove a rule, click on the corresponding trash can icon in the Delete column. If you wish to edit a rule, simply replace the URL or domain. Click Save when you are done. D-Link DIR-1360 User Manual 66 Section 4 - Configuration Static Routes The Static Routes section allows you to define custom routes to control how data traffic is moved around your network. In the Features menu on the bar on the top of the page, click Static Route. To configure IPv6 rules, click IPv6 and refer to IPv6 on page 68. To return to the main IPv4 static routes page, click IPv4. If you wish to remove a rule, click on the corresponding trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Route button. Click Save when you are done. If you edit or create a rule, the following options will appear:
Name: Enter a name for the rule. Destination Network:
Enter the IP address of packets that will take this route. Mask: Enter the subnet mask of the route. Gateway: Enter your next hop gateway to be taken if this route is used. Metric: Enter a route metric value ranging from 0 to 15. This value indicates the cost of using this route. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Save when you are done. D-Link DIR-1360 User Manual 67 Section 4 - Configuration IPv6 To configure IPv6 rules, on the Static Routes page click IPv6. To return to the main IPv4 static routes page, click IPv4. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following options will appear:
Name: Enter a name for the rule. DestNetwork: This is the IP address of the router used to reach the specified destination. PrefixLen: Enter the IPv6 address prefix length of the packets that will take this route. Gateway: Enter your next hop gateway to be taken if this route is used. Metric: Enter a route metric value ranging from 0 to 15. This value indicates the cost of using this route. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Save when you are done. D-Link DIR-1360 User Manual 68 Section 4 - Configuration Dynamic DNS Most Internet Service Providers (ISPs) assign dynamic (changing) IP addresses. Using a dynamic DNS service provider, people can enter your domain name in their web browser to connect to your server no matter what your IP address is. In the Features menu on the bar on the top of the page, click Dynamic DNS. Enable Dynamic DNS:
Enable or disable dynamic DNS. Enabling this feature will reveal further configuration options. Status: Displays the current dynamic DNS connection status. Server Address: Enter the address of your dynamic DNS server, or select one from the drop-down menu. Host Name: Enter the host name that you registered with your dynamic DNS service provider. User Name: Enter your dynamic DNS username. Password: Enter your dynamic DNS password. Time Out: Enter a time out time (in hours). Click Save when you are done. At the bottom of the page are the IPv6 host settings. To configure an IPv6 dynamic DNS host, refer to IPv6 Host on page 70. D-Link DIR-1360 User Manual 69 Section 4 - Configuration IPv6 Host The IPv6 host settings are found at the bottom of the Dynamic DNS page. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Record button. Click Save when you are done. If you edit or create a rule, the following options will appear:
Host Name: Enter the host name that you registered with your dynamic DNS service provider. IPv6 Address: Enter the IPv6 address of the dynamic DNS server. Alternatively, select the server device in the drop-down menu. Click Save when you are done. D-Link DIR-1360 User Manual 70 Section 4 - Configuration Management Time & Schedule Time The Time page allows you to configure, update, and maintain the correct time on the internal system clock. From here you can set the time zone, the Network Time Protocol (NTP) server, and enable or disable daylight saving time. In the Management menu on the bar on the top of the page, click Time &
Schedule. Time Configuration Time Zone: Select your time zone from the drop-down menu. Time: Displays the current date and time of the router. Enable Daylight Saving:
Enable or disable daylight saving time. Automatic Time Configuration Update Time Using an NTP Server:
Enable or disable to allow an NTP server on the Internet to synchronize the time and date with your router. If you enable this option, select an NTP server from the drop-down menu. To configure the router's time and date manually, disable this option and use the drop-down menus that appear to input the time and date. Click Save when you are done. To configure and manage your schedules, click Schedule and refer to Schedule on page 72. D-Link DIR-1360 User Manual 71 Section 4 - Configuration Schedule Some router functions can be controlled through a pre-configured schedule. To create, edit, or delete schedules, from the Time page click Schedule. To return to the Time page, click Time. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rule button. Click Save when you are done. If you edit or create a rule, the following screen will appear:
First, enter the name of your schedule in the Name field. Each box represents one hour, with the time at the top of each column. To add a time period to the schedule, simply click on the starting hour and drag to the ending hour. You can add multiple days to the schedule. To remove a time period from the schedule, click on the X icon. Click Save when you are done. D-Link DIR-1360 User Manual 72 Section 4 - Configuration System Log The router keeps a running log of events. This log can be sent to a Syslog server, or sent to your email address. In the Management menu on the bar on the top of the page, click System Log. Log Settings System Log Click the Check System Log button to download a text file containing the system log. SysLog Settings Enable Logging to Syslog Server:
Check this box to send the router logs to a SysLog Server. If Logging to the Syslog Server is Enabled:
Syslog Server IP Address:
Enter the IP address for the Syslog server. If the Syslog server is connected to the extender, select it from the drop-down menu to automatically populate the field. Email Settings Enable E-mail Notification:
Enable this option if you want the logs to be automatically sent to an email address. If E-mail notification is Enabled:
From E-mail Address:
Enter the email address your SysLog messages will be sent from. To E-mail Address: Enter the email address your SysLog messages will be sent to. SMTP Server Address:
Enter your SMTP server address. D-Link DIR-1360 User Manual 73 Section 4 - Configuration System Log (continued) SMTP Server Port: Enter your SMTP server port. Enable Authentication:
Check this box if your SMTP server requires authentication. Account Name: Enter your SMTP account name. Password: Enter your SMTP account's password E-mail Log When Full or On Schedule Send When Log Full:
Send on Schedule:
If enabled, this option will set the router to send the log when it is full. If enabled, this option will set the router to send according to a set schedule. Schedule:
If you enable Send On Schedule, use the drop-down menu to select a schedule to apply. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 72 for more information. Click Save when you are done. D-Link DIR-1360 User Manual 74 Section 4 - Configuration System Admin This page will allow you to change the administrator (Admin) password and enable remote management. In the Management menu on the bar on the top of the page, click System Admin. To load, save, reset settings, or reboot the router, click System and refer to Schedule on page 72. Admin Password Password: Enter a new password for the administrator account. You will need to enter this password whenever you configure the router using a web browser. Enable Graphical Authentication
(CAPTCHA):
Enables a challenge-response test to require users to type letters or numbers from a distorted image displayed on the screen to prevent online hackers and unauthorized users from gaining access to your routers network settings. Advanced Settings - Administration Enable HTTPS Server:
Check to enable HTTPS to connect to the router securely. Instead of using http://dlinkrouter.local./, you must use https://dlinkrouter.local./ in order to connect to the router. Enable Remote Management:
Remote management allows the DIR-1360 to be configured from the Internet by a web browser. A password is still required to access the web management interface. Remote Admin Port:
The port number used to access the DIR-1360 is used in the URL. Example:
http://x.x.x.x:8080 where x.x.x.x is the WAN IP address of the DIR-1360 and 8080 is the port used for the web management interface. Note: If you enabled Use HTTPS and wish to access the router remotely and securely, you must enter https:// at the beginning of the address. Click Save when you are done. D-Link DIR-1360 User Manual 75 Section 4 - Configuration System This page allows you to save the routers current configuration, load a previously saved configuration, reset the router to its factory default settings, or reboot the router. From the Admin page, click System. To return to the Admin page, click Admin. System Save Settings To Local Hard Drive:
This option will save the current router configuration settings to a file on your computer. Load Settings From Local Hard Drive:
Restore To Factory Default Settings:
This option will load a previously saved router configuration file. This will overwrite the routers current configuration. This option will restore all configuration settings back to the settings that were in effect at the time the router was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save Settings To Local Hard Drive button above. Auto Reboot Configuration Reboot The Device:
Click to reboot the router immediately. Auto Reboot: You may set the DIR-1360 to automatically reboot at a set time. The options are Never, Daily, Weekly. You may set the hour using a 24 hour format, the minute, and the day you wish to have the DIR-1360 automatically reboot. Click Save when you are done. D-Link DIR-1360 User Manual 76 Section 4 - Configuration Upgrade This page will allow you to upgrade the routers firmware, either automatically or manually. To manually upgrade the firmware, you must first download the relevant file from http://support.dlink.com. In the Management menu on the bar on the top of the page, click Upgrade. Firmware Information Current Firmware Version/Date :
The current firmware's version and date will be displayed. Check for New Firmware:
Click this button to prompt the router to automatically check for a new firmware version. If a newer version is found, it will prompt you to install it. Upgrade Manually Upgrade Firmware:
If you wish to upgrade manually, first download the firmware file you wish to upgrade to. Next, click the Upgrade Firmware button and browse to the file to install the new firmware. You can also browse to a language pack file to install a new language pack. D-Link DIR-1360 User Manual 77 Section 4 - Configuration Statistics On the Statistics page you can view the amount of packets that pass through the router on the WAN, LAN, and wireless segments. In the Management menu on the bar on the top of the page, click Statistics. You can view the Internet, LAN, Wi-Fi 2.4 GHz, or Wi-Fi 5 GHz by clicking on the respective tabs at the top. The graph will update in real time. To clear the information on the graph, click Clear. The traffic counter will reset if the device is rebooted. D-Link DIR-1360 User Manual 78 Section 4 - Configuration Connect a Wireless Client to your Router WPS Button The easiest and most secure way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DIR-1360 router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step 1 - Press the WPS button on the DIR-1360 for about 1 second. The LED on the front will start to blink. Step 2 - Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS process). Step 3 - Allow up to 1 minute for your connection to be configured. Once the Internet light stops blinking, you will be connected and your wireless connection will be encrypted with WPA2. WPS Button D-Link DIR-1360 User Manual 79 Section 6- Connecting a Wireless Client Windows 10 When connecting to the DIR-1360 wirelessly for the first time, you will need to input the wireless network name (SSID) and Wi-Fi password (security key) of the device you are connecting to. If your product has a Wi-Fi configuration card, you can find the default network name and Wi-Fi password here. Otherwise refer to the product label for the default Wi-Fi network SSID and password, or enter the Wi-Fi credentials set during the product configuration. To join an existing network, locate the wireless network icon in the taskbar, next to the time display and click on it. Wireless Icon Clicking on this icon will display a list of wireless networks which are within range of your computer. Select the desired network by clicking on the SSID. D-Link DIR-1360 User Manual 80 Section 6- Connecting a Wireless Client To connect to the SSID, click Connect. To automatically connect with the router when your device next detects the SSID, click the Connect Automatically check box. You will then be prompted to enter the Wi-Fi password (network security key) for the wireless network. Enter the password into the box and click Next to connect to the network. Your computer will now automatically connect to this wireless network when it is detected. You can also use Wi-Fi Protected Setup (WPS) to connect to the router. Press the WPS button on your D-Link device and you will be automatically connected. D-Link DIR-1360 User Manual 81 Section 6- Connecting a Wireless Client Windows 8 WPA/WPA2 It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used. To join an existing network, locate the wireless network icon in the taskbar next to the time display. Wireless Icon Clicking on this icon will display a list of wireless networks that are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DIR-1360 User Manual 82 Section 6- Connecting a Wireless Client You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router during this step to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected to. D-Link DIR-1360 User Manual 83 Section 6- Connecting a Wireless Client Windows 7 WPA/WPA2 It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. Click on the wireless icon in your system tray (lower-right corner). The utility will display any available wireless networks in your area. Wireless Icon D-Link DIR-1360 User Manual 84 Section 6- Connecting a Wireless Client Highlight the wireless connection with Wi-Fi name (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. The following window appears while your computer tries to connect to the router. D-Link DIR-1360 User Manual 85 Section 6- Connecting a Wireless Client Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. You can also connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DIR-1360 User Manual 86 Section 6- Connecting a Wireless Client WPS The WPS feature of the DIR-1360 can be configured using Windows 7. Carry out the following steps to use Windows 7 to configure the WPS feature:
Click the Start button and select Computer from the Start menu. Click Network on the left side. D-Link DIR-1360 User Manual 87 Section 6- Connecting a Wireless Client Double-click the DIR-1360. DIR-1360 Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Routers Web UI) and click Next. D-Link DIR-1360 User Manual 88 Section 6- Connecting a Wireless Client Type a name to identify the network. To configure advanced settings, click the icon. Click Next to continue. D-Link DIR-1360 User Manual 89 Section 6- Connecting a Wireless Client The following window appears while the DIR-1360 is being configured. Wait for the configuration to complete. The following window informs you that WPS on the DIR-1360 has been set up successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. Click Close to complete WPS setup. D-Link DIR-1360 User Manual 90 Section 6- Connecting a Wireless Client Windows Vista Windows Vista users may use the built-in wireless utility. If you are using another companys wireless utility, please refer to the user manual of your wireless adapter for help connecting to a wireless network. Most wireless utilities will have a site survey option similar to the Windows Vista utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select Connect to a network. The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-1360 User Manual 91 Section 6- Connecting a Wireless Client It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. WPA/WPA2 Open the Windows Vista Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. D-Link DIR-1360 User Manual 92 Section 6- Connecting a Wireless Client Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DIR-1360 User Manual 93 Section 6- Connecting a Wireless Client Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DIR-1360. Read the following descriptions if you are having problems. The examples below are illustrated in Windows XP. If you have a different operating system, the screenshots on your computer will look similar to these examples. 1. Why cant I access the web-based configuration utility?
When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website, nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. Make sure you have an updated Java-enabled web browser. We recommend the following:
- Microsoft Internet Explorer 10 or higher
- Mozilla Firefox 28 or higher
- Google Chrome 28 or higher
- Apple Safari 6 or higher Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable, or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on. Disable any Internet security software running on the computer. Software firewalls such as ZoneAlarm, BlackICE, Sygate, Norton Personal Firewall, and Windows XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DIR-1360 User Manual 94 Section 7 - Troubleshooting Configure your Internet settings:
Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults. Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times. Close your web browser (if open) and open it. Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management. If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer. 2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. This process will change all your settings back to the factory defaults. To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, leave the password box empty. D-Link DIR-1360 User Manual 95 Section 7 - Troubleshooting 3. Why cant I connect to certain sites or send and receive emails when connecting through my router?
If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc). To find the proper MTU Size, youll have to do a special ping of the destination youre trying to go to. A destination could be another computer, or a URL. Click on Start and then click Run. Windows 95, 98, and Me users type in command (Windows NT, 2000, XP, Vista, and 7 users type in cmd) and press Enter (or click OK). Once the window opens, youll need to do a special ping. Use the following syntax:
ping [url] [-f] [-l] [MTU value]
Example: ping yahoo.com -f -l 1472 D-Link DIR-1360 User Manual 96 Section 7 - Troubleshooting You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network were working with
(1452+28=1480). Once you find your MTU, you can now configure your router with the proper MTU size. To change the MTU rate on your router follow the steps below:
Open your browser, enter the IP address of your router (192.168.0.1) and click OK. Enter your username (admin) and password (blank by default). Click OK to enter the web configuration page for the device. Click on Setup and then click Manual Configure. To change the MTU, enter the number in the MTU field and click Save Settings to save your settings. Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-1360 User Manual 97 Section 7 - Troubleshooting Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers. A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people work, and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide this link. D-Link DIR-1360 User Manual 98 Appendix A - Wireless Basics What is Wireless?
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly so you have the freedom to connect computers anywhere in your home or office network. Why D-Link Wireless?
D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How does wireless work?
Wireless works similarly to how cordless phones work, through radio signals that transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two different types of wireless networksl: Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN). Wireless Local Area Network (WLAN) In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, university and high school campuses, airports, golf courses, and many other outdoor venues. D-Link DIR-1360 User Manual 99 Appendix A - Wireless Basics Wireless Personal Area Network (WPAN) Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesnt use nearly as much power. This makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries. Who uses wireless?
Wireless technology as become so popular in recent years that almost everyone is using it, whether its for home, office, business, D-Link has a wireless solution for it. Home Uses/Benefits Gives everyone at home broadband access Surf the web, check email, instant message, etc. Gets rid of the cables around the house Simple and easy to use Stay on top of everything at home as you would at office Remotely access your office network from home Share Internet connection and printer with multiple computers No need to dedicate office space Small Office and Home Office Uses/Benefits D-Link DIR-1360 User Manual 100 Appendix A - Wireless Basics Where is wireless used?
Wireless technology is expanding everywhere, not just at home or office. People like the freedom of mobility and its becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called hotspots. Using a D-Link USB adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like:
airports, hotels, coffee shops, libraries, restaurants, and convention centers. Wireless network is easy to setup, but if youre installing it for the first time it could be quite a task not knowing where to start. Thats why weve put together a few setup steps and tips to help you through the process of setting up a wireless network. Tips Here are a few things to keep in mind, when you install a wireless network. Centralize your router or access point Make sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range. Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. Security Dont let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to the product manual for detail information on how to set it up. D-Link DIR-1360 User Manual 101 Appendix A - Wireless Basics Wireless Modes There are basically two modes of networking:
Infrastructure All wireless clients will connect to an access point or wireless router. Ad-hoc Directly connecting to another computer for peer-to-peer communication using wireless network adapters on each computer, such as two or more DIR-1360 wireless network USB adapters. An Infrastructure network contains an access point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An ad-hoc network contains only clients, such as laptops with wireless USB adapters. All the adapters must be in ad-hoc mode to communicate. D-Link DIR-1360 User Manual 102 Appendix A - Wireless Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. In Windows, type cmd in the Start Search box and click OK. At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-1360 User Manual 103 Appendix B - Networking Basics Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DIR-1360 offers the following types of security:
WPA2 (Wi-Fi Protected Access 2) WPA (Wi-Fi Protected Access) WPA2-PSK (Pre-Shared Key) WPA-PSK (Pre-Shared Key) What is WPA?
WPA (Wi-Fi Protected Access), is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy). The 2 major improvements over WEP:
Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing algorithm and by adding an integrity-checking feature, ensures that the keys havent been tampered with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP. User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP regulates access to a wireless network based on a computers hardware-specific MAC address, which is relatively simple to be sniffed out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized network users can access the network. WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DIR-1360 User Manual 104 Appendix B - Networking Basics Technical Specifications Device Interfaces Wireless Interface (2.4 GHz): IEEE 802.11 b/g/n Wireless Interface (5 GHz): IEEE 802.11 a/n/ac Four 10/100/1000 Mbps LAN ports One 10/100/1000 Mbps WAN port Antenna Types Four fixed external antennas Standards IEEE 802.11ac1,2,3 IEEE 802.11n IEEE 802.11g IEEE 802.11b IEEE 802.11a IEEE 802.11d IEEE 802.3u IEEE 802.3ab Security WPATM - Personal WPA2TM - Personal Wi-Fi Protected Setup (WPS) PIN/PBC Power Output: 12 V DC, 1 A Input: 100 to 240 V AC, 50/60 Hz Temperature Operating: 0 to 40C (32 to 104 F) Storage: -20 to 65 C (-4 to 149 F) Humidity Operating: 10% to 90% maximum, non-condensing Storage: 5% to 95% maximum, non-condensing Certifications NCC BSMI IPv6 Wi-Fi Protected Setup (WPS) Wi-Fi Multimedia (WMM) Dimensions & Weight 253 g (0.51 lbs) L x W x H: 250 x 235 x 36 mm (9.8 x 9.25 x 1.4 in) 1 Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n, and 802.11ac specifications. Actual data throughput will vary. Network conditions and environmental factors,including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. 2 Frequency Range varies depending on countrys regulation. 3 The DIR-1360 does not include 5.25-5.35 GHz & 5.47-5.725 GHz in some regions. D-Link DIR-1360 User Manual 105 Appendix C - Technical Specifications Regulatory Information Industry Canada statement:
This device complies with ISEDs licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d ISED applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated. Avertissement:
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
(ii) lorsquil y a lieu, les types dantennes (sil y en a plusieurs), les numros de modle de lantenne et les pires angles dinclinaison ncessaires pour rester conforme lexigence de la p.i.r.e. applicable au masque dlvation, nonce la section 6.2.2.3, doivent tre clairement indiqus. Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 33cm between the radiator & your body. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis plus de 33 cm entre le radiateur et votre corps. D-Link DIR-1360 User Manual 106 Appendix D - Regulatory Information Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
-
-
-
-
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 29cm between the radiator & your body. D-Link DIR-1360 User Manual 107 Appendix D - Regulatory Information NCC
:
:
(UNII) 5.25-5.35 MPE(MPE) 1 mW/cm2 0 mW/cm2 D-Link DIR-1360 User Manual 108 Appendix D - Regulatory Information
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-01-02 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
2 | 2412 ~ 2462 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2019-01-02
|
||||
1 2 | Applicant's complete, legal business name |
D-Link Corporation
|
||||
1 2 | FCC Registration Number (FRN) |
0007371172
|
||||
1 2 | Physical Address |
17595 Mt. Herrmann
|
||||
1 2 |
Fountain Valley, 92708
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 2 |
t******@timcoengr.com
|
|||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
KA2
|
||||
1 2 | Equipment Product Code |
IR1360A1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
B******** A********
|
||||
1 2 | Title |
General Counsel
|
||||
1 2 | Telephone Number |
714-8********
|
||||
1 2 | Fax Number |
866-7********
|
||||
1 2 |
b******@dlink.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | AC1300 Mesh-Enabled Smart Wi-Fi Router | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is maximum power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 29cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes. | ||||
1 2 | Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 29cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
||||
1 2 | Name |
E****** L********
|
||||
1 2 | Telephone Number |
886-3******** Extension:
|
||||
1 2 | Fax Number |
+886-********
|
||||
1 2 |
e******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC MO | 5180 | 5240 | 0.622 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | CC MO | 5745 | 5825 | 0.233 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC MO | 2412.00000000 | 2462.00000000 | 0.8770000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC