all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
manual | Users Manual | 5.40 MiB | ||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Attestation Statements | |||||||
1 2 | Test Setup Photos |
1 2 | manual | Users Manual | 5.40 MiB |
Version 1.01 | 12/18/2013 User Manual Wi-Fi AC750 Portable Router and Charger DIR-510L Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description 1.0 1.01 7 November, 2013
Initial release for Revision A1 18 December, 2013
Update to Revision A1 Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Apple, Apple logo, Safari, iPhone, iPad, iPod touch and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries. App StoreSM is a service mark of Apple Inc. Chrome browser, Google Play and Android are trademarks of Google Inc. Internet Explorer, Windows and the Windows logo are trademarks of the Microsoft group of companies. Copyright 2013 by D-Link Corporation, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc. D-Link DIR-510L User Manual i Table of Contents Table of Contents Preface ................................................................................. i Manual Revisions ........................................................................... i Trademarks ...................................................................................... i Product Overview ..............................................................1 Package Contents ......................................................................... 1 System Requirements ................................................................. 2 Introduction ................................................................................... 3 Features ............................................................................................ 4 Hardware Overview ..................................................................... 5 Installation .........................................................................7 Wireless Installation Considerations ...................................... 7 Connection Diagrams ................................................................. 8 Broadband Router Setup ................................................... 8 Mobile Router Setup ........................................................... 9 Wi-Fi Hotspot Setup ...........................................................10 LAN Sharing Setup .............................................................11 Setting Up Your DIR-510L ........................................................12 Connecting Your Equipment ..........................................13 Connecting to Your DIR-510L .........................................14 Sharing Files .....................................................................16 Using the mydlink SharePort app for iPad, iPhone, and iPod touch ...................................................................................16 Main Menu ............................................................................20 Documents ............................................................................21 Pictures ...................................................................................23 Videos .....................................................................................25 Music .......................................................................................27 Folders ....................................................................................30 Favorites .................................................................................33 Using the mydlink SharePort app for Android ..............34 Main Menu ............................................................................38 Documents ............................................................................39 Pictures ...................................................................................41 Videos .....................................................................................43 Music .......................................................................................45 Folders ....................................................................................48 Favorites .................................................................................52 Using SharePort Mobile for Windows 8/RT .....................53 Main Menu ............................................................................56 Documents ............................................................................57 Pictures ...................................................................................58 Movies .....................................................................................60 Music .......................................................................................62 Folder ......................................................................................65 Favorite ...................................................................................68 Using SharePort Web Access ..................................................69 Music .......................................................................................71 Pictures ...................................................................................72 Videos .....................................................................................73 Documents ............................................................................74 D-Link DIR-510L User Manual ii Windows 7 ................................................................................ 111 WPA/WPA2 ......................................................................... 111 Windows Vista ......................................................................... 114 WPA/WPA2 ......................................................................... 115 Windows XP ............................................................................. 117 WPA/WPA2 ......................................................................... 118 Troubleshooting ............................................................120 Wireless Basics ...............................................................125 What is Wireless? ...................................................................... 126 Tips ................................................................................................ 128 Wireless Modes ......................................................................... 129 Networking Basics .........................................................130 Technical Specifications ................................................133 GPL Code Statement......................................................135 Safety Statements .........................................................150 Table of Contents Configuration ...................................................................75 Home ..............................................................................................76 Current Status ......................................................................76 Internet ...................................................................................77 Router .....................................................................................83 Wi-Fi Clients ..........................................................................85 USB Storage ..........................................................................86 Settings ..........................................................................................87 Internet Profiles ...................................................................87 DHCP ..................................................................................88 xDSL Broadband (PPPoE) ............................................89 3G/4G Wireless USB .......................................................90 Wi-Fi Hotspot Client ......................................................91 Static IP ..............................................................................92 Wi-Fi .........................................................................................93 Network (LAN) .....................................................................95 SharePort ...............................................................................97 Guest Zone ......................................................................... 100 mydlink ................................................................................ 101 Management ............................................................................. 104 Admin .................................................................................. 104 System ................................................................................. 105 Upgrade .............................................................................. 106 Statistics .............................................................................. 107 Connecting a Wireless Client ........................................108 WPS Button ................................................................................ 108 Windows 8 ................................................................................ 109 WPA/WPA2 ......................................................................... 109 D-Link DIR-510L User Manual iii Section 1 - Product Overview Package Contents DIR-510L Quick Installation Guide Micro USB Power Adapter D-Link Cloud Service Mobile Apps Guide If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the will cause damage and void the warranty for this product. D-Link DIR-510L User Manual 1 Section 1 - Product Overview System Requirements Network Requirements
Cable/DSL modem, 3G/4G USB adapter, or a hotspot
IEEE 802.11bgn wireless clients A computer or mobile device with the following:
Windows, Macintosh, Linux-based, iOS, or Android operating system
An installed Wi-Fi adapter Web-based Configuration Utility Requirements Browser Requirements:
Internet Explorer 8 or higher
Firefox 12.0 or higher
Safari 4 or higher
Chrome 20 or higher Windows Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version. mydlink SharePort Requirements
iPhone/iPad/iPod Touch (iOS 5.0 or higher)
Android device (2.3.3 or higher) SharePort Mobile
Windows 8/RT device D-Link DIR-510L User Manual 2 Section 1 - Product Overview Introduction The D-Link DIR-510L Wi-Fi AC750 Portable Router and Charger lets you create a secure wireless network to share photos, files, music, and video on the go. Connect the router to a cable or DSL modem and share your high-speed Internet access with everyone on the network. Even when you are away from home, connect to a Wi-Fi hotspot to share your Internet access with your friends securely. Directly attaching a 3G/4G USB adapter allows sharing of a mobile broadband connection on the go. For convergence and convenience, the DIR-510L also supports UPnP and DLNA protocols for easy sharing of media to other certified devices. With the mydlink SharePort and SharePort Mobile apps, your iOS, Android, and Windows 8/RT devices can easily access files and stream media either remotely or locally from a USB drive attached to the router. The DIR-510L provides the latest Wireless AC 750 technology for smooth performance during data transmission and multimedia streaming. It supports all of the latest wireless security features to prevent unauthorized access; no matter if you are connected to the Internet via a wired or wireless connection. Support for WPA2 standards ensures that youll be able to use the best possible encryption method, regardless of your client devices. WPS 2.0 Wi-Fi Protected Setup allows for easy and secure wireless connections and a Guest Zone feature provides a separate subnet for guests to access the Internet without the privilege to access the administration UI. In addition, this router allows VPN pass through via PPTP, L2TP, or IPSec for secure tunnel connections. To round out this complete all-in-one mobile solution, the DIR-510L can charge mobile devices such as phones, tablets, and other devices via its universal USB ports. This feature offers convenience and peace of mind when your devices are low on battery or when youve forgotten to bring along your devices chargers on your travels. D-Link DIR-510L User Manual 3 Section 1 - Product Overview Features
Advanced Wireless AC Technology - The DIR-510L provides up to 750 Mbps1 wireless speeds with other 802.11ac wireless clients using dual frequency bands to free up network congestion. This capability allows for smooth performance in video streaming, audio playback, and online gaming for multiple clients.
Access the Internet - The DIR-510L allows you to connect all of your wireless devices to the Internet via wired Broadband, 3G/4G, or wireless hotspot.
Multimedia On-The-Go - The DIR-510L is designed as the media hub for all of your mobile needs with the following features:
Dual USB Interfaces2 - Easily store and share music, videos, photos, and files on your USB drive while charging another device.
UPnP and DLNA Support3 - Compliant with the latest DLNA certification requirements, the DIR-510L can stream many compatible media formats to other DLNA devices wirelessly.
mydlink SharePort app - Stream your media and upload files locally or remotely through the Internet to your iPhone, iPad or Android device.
Built-in Charger4 - A 4000 mAh lithium-ion internal battery with Over Current Protection (OCP), Over Voltage Protection (OVP), Over Temperature Protection (OTP), and Short Circuit Protection (SCP) lets you charge your mobile devices on-the-go.
Compatible with 802.11n, 802.11g and 802.11b Devices - The DIR-510L is still fully backward-compatible with the IEEE 802.11n, 802.11g and 802.11b standards, so it can connect with existing devices using these standards. 1Maximum wireless signal rate derived from IEEE Standard specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. 2The battery may be drained if a high-power 2.5 or 3.5 USB hard drive is attached to the USB ports. 3DLNA support will be available in a future firmware update. 4Actual usable capacity may vary depending on charging conditions. D-Link DIR-510L User Manual 4 Section 1 - Product Overview 1 3 Hardware Overview 1 ON/OFF/CHARGER Switch Slide the switch to ON to operate the unit in router modes.1 Slide the switch to CHARGER to charge devices connected via USB. 2 WPS Button 3 Reset Button 4 USB Port 1 A Press the WPS button to automatically connect additional devices to the unit securely. Pressing the Reset button restores the router to its original factory default settings. Connect a 3G/4G USB adapter to use Mobile Router Mode to share your Internet broadband. Connect a USB drive to share locally using mydlink SharePort and SharePort Web Access. Connect a device (high-power support) via USB cable to charge it.2 5 Power/Status LED Green (Solid) Green (Blinking) Orange (Solid) Orange (Blinking) Red (Solid) Off The device is connected and working properly. The device is currently connecting via WPS. The device is booting or resetting. The device cannot connect to the Internet or is in recovery mode. The system is defective. The device is turned off or in charging mode. Green (Solid) Battery capacity is 80% or more. Orange (Solid) Battery capacity is between 15% and 80%. 6 Battery LED Red (Solid) Battery capacity is 15% or less. Red (Blinking) Battery is defective. Off Charging is complete (connected to power adapter) or the device is out of battery. 7 USB Port 0.5 A Connect a USB drive to share locally using mydlink SharePort and SharePort Web Access.1 2 4 5 6 7 D-Link DIR-510L User Manual 5 1To comply with SAR certification, no RF devices can be connected to the 0.5 A USB port. Section 1 - Product Overview 8 9 8 Power Receptor
(Micro USB) 9 INTERNET Port Connect the included power adapter to power and charge the unit. Connect an Ethernet cable to a cable or DSL modem to use Broadband Router Mode. 1If you have attached one or more USB devices (such as a 2.5 USB drive) that draw a total of 0.7 A or more power, the power adapter will not supply enough voltage to charge your DIR-510L while simultaneously powering the USB devices. 2The DIR-510L only supports charging other devices on USB port (1 A) in CHARGER mode. D-Link DIR-510L User Manual 6 Section 2 - Installation Installation Wireless Installation Considerations The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapters range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. 2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal. 4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise. 5. If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DIR-510L User Manual 7 Section 2 - Installation Connection Diagrams Broadband Router Setup In the Broadband Router Mode, the DIR-510L connects to your cable modem, DSL modem, or other Internet source via an Ethernet cable and wirelessly shares your Internet connection with other devices, providing Internet access for an entire home, office, or hotel room. You can then connect an SD card and/or a USB drive to share files with these devices on your wireless network by using the SharePort feature. Note: To ensure performance when using SharePort, it is highly suggested to limit this application to 5 simultaneous users. Cable or DSL line Internet Modem USB drive USB drive Smartphone iPad Computer D-Link DIR-510L User Manual 8 Ethernet cable Section 2 - Installation Mobile Router Setup In the Mobile Router Mode, you must have a compatible 3G/4G USB adapter and be within your ISPs cellular coverage. Once connected, you can then wirelessly share your Internet connection with other devices on the go. You can also share files with these devices on your wireless network by inserting a USB drive and using the SharePort feature. Note: Please check your local D-Link website for more information on compatible 3G/4G USB adapters. 3G/4G USB adapter Internet 3G/4G cell tower Smartphone iPad USB drive Computer D-Link DIR-510L User Manual 9 Section 2 - Installation Wi-Fi Hotspot Setup You can set up your DIR-510L to share a hotspot (for example, at a cafe) wirelessly with other devices. In the Wi-Fi Hotspot Mode, the DIR-510L connects wirelessly to another wireless network and then wirelessly shares your Internet connection with other devices. You must have the username and password for the access point you are connecting the DIR-510L to. Note: In public environments, it is highly recommended to password protect the shared Internet connection on the DIR-510L. Internet Wi-Fi Hotspot USB drive USB drive Smartphone iPad Computer D-Link DIR-510L User Manual 10 Section 2 - Installation LAN Sharing Setup Even without Internet broadband access, you can connect other Wi-Fi devices wirelessly to the DIR-510L by creating a private network anywhere. You can then connect one or two USB drives to locally share files with these devices on your wireless network via the SharePort feature. Note: In public environments, it is highly recommended to password protect the private LAN on the DIR-510L. USB drive USB drive Smartphone iPad Computer D-Link DIR-510L User Manual 11 Section 2 - Installation Setting Up Your DIR-510L
Peel off the protective film from the top and bottom of the device.
Charge the device by connecting one end of the power adapter to the DIR-510L and the other end to a wall outlet. Charge the device for at least 4 hours or until the battery LED indicator is solid green or off. Note: For more information on charging the device and the battery LED indicator, refer to Hardware Overview on page 5. D-Link DIR-510L User Manual 12 Section 2 - Installation Depending on your equipment, the DIR-510L can be set up easily from any device with Wi-Fi and a Web browser. Connecting Your Equipment Using Broadband Ethernet: You will need an Ethernet cable connection to your cable or DSL modem.
Connect one end of an Ethernet cable to your modem and the other end to the Internet port on the DIR-510L. Using a 3G/4G USB Adapter: You will need a compatible 3G/4G USB adapter with an active SIM card. Please check our compatibility list for more information.
Plug the 3G/4G USB adapter into the USB 1 A port on the DIR-510L. 3G/4G USB Adapter Connecting to a Wi-Fi Hotspot: You will need the Wi-Fi network name and password of the hotspot you want to connect to. Wi-Fi Hotspot D-Link DIR-510L User Manual 13 Section 2 - Installation Connecting to Your DIR-510L To configure the router, you will need to connect to it wirelessly from your mobile device or computer.
Turn on DIR-510L by sliding the ON/OFF/CHARGER switch to ON.
On your computer or mobile device, connect to the DIR-510Ls wireless network. By default, the settings are:
2.4 GHz Wi-Fi Network Name (SSID): DIR510L
5 GHz Wi-Fi Network Name: DIR510L_5GHz
Password: (leave this blank)
Once connected, open a Web browser on your mobile or computer and type http://dlinkrouter.local. or http://
dlinkrouter in the URL address box.
At the login page, enter the Admin Password. By default, it should be left blank. Click Log In. Note: If you have a device that supports Wi-Fi Protected Setup, please refer to WPS Button on page 108. Mobile Desktop D-Link DIR-510L User Manual 14 Section 2 - Installation After logging in, you will see the Current Status page. If the mark, you are already Internet icon connected to the Internet and the device is ready for use!
is blue and there is a If the Internet icon to :
is grey and there is an icon, please refer
xDSL Broadband (PPPoE) on page 89 if you are using an xDSL modem.
3G/4G Wireless USB on page 90 if you are using a 3G/4G USB adapter.
Wi-Fi Hotspot Client on page 91 if you are connecting to a Wi-Fi hotspot. D-Link DIR-510L User Manual 15 Section 3 - Usage Using the mydlink SharePort app for iPad, iPhone, Sharing Files and iPod touch The mydlink SharePort app is a streamlined mobile application that allows you to conveniently stream media and share files stored on a removable storage connected to your router. Once the router is set up, you can start the app and easily connect from a local network or through the Internet to access your photos, videos, music, and documents. It allows you to create your own personal cloud storage; you can upload files and photos from your mobile device to the removable storage via the app from anywhere in the world!
Note: In order to ensure smooth streaming performance, you will need a minimum of 2 Mbit/s upload bandwidth for your routers Internet connection. Streaming performance will vary depending on the quality of your Internet connection. 1. If you are connecting remotely through the mydlink SharePort app from the Internet, you will need a mydlink account. Please refer to mydlink on page 101 for more details. 2. Make sure the device is powered on. Then plug your USB drive into the USB port of the device. Note: If you connect a removable storage with many files or a large capacity, it may take a while for the router to scan and catalog your files. D-Link DIR-510L User Manual USB drive 16 Section 3 - Usage 3. Use your iPhone, iPad or iPod Touch to search for and download the free mydlink SharePort app from the App Store. If you have a QR code reader, you can scan the code for mydlink SharePort to the right. 4. On your mobile device, go to your Wi-Fi settings and connect to your routers wireless network using the default Wi-Fi settings. By default, your wireless network details are:
2.4 GHz Wi-Fi Network Name (SSID): DIR510L
5 GHz Wi-Fi Network Name: DIR510L_5GHz
Password: (leave this blank) D-Link DIR-510L User Manual 17 Section 3 - Usage 5. Once connected, tap the mydlink SharePort icon, and the app will load. 6. At the login page, tap to select between a local access or remote access connection. If you are unsure, tap Help?
to see descriptions of the two types of connections. Local Access:
Local mode will connect you to storage on your current network. For example, if you are at home connecting to your router, choose this mode. Remote Access:
Remote mode will connect you to storage on your router in a different location. For example, you are at your office connecting to your router at home. If you are directly connected to the DIR-510Ls wireless network, tap Local Access and enter the Admin Password of your router, then tap Log In. If you are connecting through the Internet tap Remote Access and enter your mydlink login information, then tap Log In. Tap on your router on the devices page that appears. You can now share your files. After logging in, select your router from the device list. D-Link DIR-510L User Manual 18 Section 3 - Usage 7. You can now use the mydlink SharePort app interface to stream media and access files stored on your removable drive. The wireless icon at the bottom will be lit blue to indicate a Local Access connection. It will be green to indicate you are connected to the router through Remote Access. Note: If you see a red wireless icon, your routers network environment may not be suitable for a direct network connection and you may experience slow network speeds. D-Link DIR-510L User Manual 19 Section 3 - Usage Main Menu The mydlink SharePort main menu has different sections that let you see all the documents, photos, movies, or music stored on your removable storage. Tap < or >, or swipe left or right to move between the different sections. The Wi-Fi icon at the bottom indicates an active local network connection (blue) or remote connection (green/red). Tap Log In if it is not lit, or Log Out to return to the login page. Tap on the document icon to view documents. Tap the camera icon to view photos. Tap on the movie icon to play videos. Tap on the music icon to play audio files. Tap on the folder icon to browse all files in a folder view. Tap on the star icon to access your favorite files. D-Link DIR-510L User Manual 20 Section 3 - Usage Documents The Documents section allows you to share, print, and view documents streamed from your DIR-510L to your mobile device. Tap the document icon on the main menu to browse the documents on your mobile device. Search Bar:
Enter a filename here to search your storage. Tap to mark files for deletion. Tap the star icon next to each file to download it to your device and add it into your Favorites section. Tapping this icon gives you additional options:
Mail: Tap to e-mail the file.
iCloud: Tap to store the file on iCloud.
AirPrint: Tap to print the file.
Open In...: Tap to use a third-party app to open the file. The bottom menu bar includes these options:
Tap to go back to the main menu. Tap to update the list of files. Tap to reorder the files alphabetically. D-Link DIR-510L User Manual 21 Section 3 - Usage Tap on a file to start the document viewer. In the viewer:
Tap to add/remove the file from your Favorites. Tap to bring up the same options as >. Note: Some files may require a third-party app to view them. D-Link DIR-510L User Manual 22 Section 3 - Usage Pictures The Pictures section allows you to stream images from your DIR-510L to your mobile device. Tap the camera icon on the main menu to browse your photo collection on your removable storage. Search Bar:
Enter a filename here to search your storage. Tap to mark files for deletion. Tap the star icon next to each file to download it to your device and add it into your Favorites section. Tapping this icon gives you additional options:
Mail: Tap to e-mail the image.
iCloud: Tap to store the image on iCloud.
AirPrint: Tap to print the image.
Facebook: Tap to upload the image to your Facebook account.
Twitter: Tap to upload the image to your Twitter account.
Open In...: Tap to use a third-party app to open the file. The bottom menu bar includes these options:
Tap to go back to the main menu. Tap to start a slideshow of your photos. Tap the screen again to bring up the menu. Tap to update the list of files. Tap to reorder the files alphabetically. D-Link DIR-510L User Manual 23 Section 3 - Usage Tap on a file to start the photo viewer. In the viewer:
Tap to add/remove the current image from your Favorites. Tap to start the slideshow. Tap to bring up the same options as >. D-Link DIR-510L User Manual 24 Section 3 - Usage Videos The Videos section allows you to stream video clips and movies from your DIR-510L to your mobile device. Tap the movie icon on the main menu to browse your videos on your removable storage. Search Bar:
Enter a filename here to search for a specific file. Tap to mark files for deletion. Tap the star icon next to a file to download it to your device and add it into your Favorites section. Tapping this icon gives you additional options:
Mail: Lets you e-mail the file.
iCloud: Lets you store the file on iCloud.
Open In...: Lets you use a third-party app to open the file. The bottom menu bar includes these options:
Tap to go back to the main menu. Tap to update the list of files. Tap to reorder the files alphabetically. D-Link DIR-510L User Manual 25 Section 3 - Usage Tap on a file to start playing it. In the player:
Tap to play/pause the video. You can scroll to any time on the time line by holding and sliding your finger. Tap to enter/exit fullscreen mode. Tap to add/remove the file from your Favorites. Tapping this icon gives you additional options:
Mail: Lets you e-mail the video.
iCloud: Lets you store the video on iCloud.
Open In...: Lets you use a third-party app to open the file. D-Link DIR-510L User Manual 26 Section 3 - Usage Music The Music section allows you to stream songs from your DIR-510L to your mobile device. Tap the music icon on the main menu to browse your music collection on your removable storage. Search Bar:
Enter a filename here to search your storage. Tap to create a playlist and mark files for deletion. Tap the star icon next to each file to download it to your device and add it into your Favorites section. Tapping this icon gives you additional options:
Mail: Lets you e-mail the file.
iCloud: Lets you store the file on iCloud.
Open In...: Lets you use a third-party app to open the file. The bottom menu bar includes these options:
Tap to go back to the main menu. Tap to update the list of files. Tap to reorder the files alphabetically. D-Link DIR-510L User Manual 27 Section 3 - Usage Tap on a file to start playing it. In the player:
Tap to repeat all. Tap again to repeat a single song. Tap to skip to the previous/next song. Tap to enable/disable shuffle mode. To create a playlist:
Tap Edit > Add Playlist.
Enter a name for the playlist, then tap Save.
The name of the playlist will appear in the browser next to the icon. D-Link DIR-510L User Manual 28 Section 3 - Usage To add songs to a playlist:
Tap the playlist in the browser.
Tap Add Music... to add songs to the current playlist.
Tick the songs you wish to add and tap Done. To delete songs from the playlist:
Tap Edit in the playlist browser and mark the files to be deleted.
Tap Delete. D-Link DIR-510L User Manual 29 Section 3 - Usage Folders You can browse your removable storage in a folder view in the folders section. Tapping the filename will open the viewer/player for that file type as described in the previous pages. You can also upload files from your mobile device to the removable storage attached to your router. Search Bar:
Enter a filename here to search your storage. Tap to take you to the editing screen where you can add a folder and mark files for deletion or copying. Tap the star icon next to each file to download it to your device and add it into your Favorites section. Tapping the > icon gives you additional options depending on the file type. The bottom menu bar includes these options:
Tap to go back to the main menu. Tap to upload files from your device to your removable storage. Tap to update the list of files. Tap to reorder the files alphabetically. D-Link DIR-510L User Manual 30 Section 3 - Usage To delete files:
Tap Edit at the top right.
Tick the circle next to a file to mark it for deletion.
Tap on Delete at the bottom to delete the file. To copy files:
Tap on Copy to bring up a window where you can select the folder to copy to.
Browse to the directory you want to copy the marked files to and tap Paste.
You can also tap Add Folder to create a new folder. To create a new folder:
Browse to the directory you wish to create a new folder in.
Tap Edit at the top right.
Tap Add Folder to add a new folder.
Enter the name of the new folder, then tap Save.
Tap OK to confirm folder creation. D-Link DIR-510L User Manual 31 Section 3 - Usage To upload images and videos from your mobile device:
Browse to the folder you wish to upload to.
Tap Upload at the bottom.
Select the photos/videos you wish to upload.
Tap Done. During the upload process, the size of the file and the upload progress will be displayed. To upload more files, tap the + icon at the top right and repeat the steps listed above. D-Link DIR-510L User Manual 32 Section 3 - Usage Favorites The Favorites section allows you to quickly access your most often used files, no matter what file type, in a special section. Files added to the Favorites section will be copied here for playback in a centralized location. Tap to mark files for deletion from the local storage in Favorites. The file will still be accessible in other mydlink SharePort sections. Tapping this icon gives you additional options depending on the file type. The bottom menu bar includes these options:
Tap to go back to the main menu. Tap to update the list of files. Tap to reorder the files alphabetically. Tap on a file to start the file viewer. In the viewer:
Tap to add/remove the file from your Favorites. Tap to bring up additional options. Note: The file options available will vary depending on the file type. D-Link DIR-510L User Manual 33 Section 3 - Usage Using the mydlink SharePort app for Android The mydlink SharePort app is a streamlined mobile application that allows you to conveniently stream media and share files stored on a removable storage connected to your router. Once the router is set up, you can start the app and easily connect from a local network or through the Internet to access your photos, videos, music, and documents. It allows you to create your own personal cloud storage; you can upload files and photos from your mobile device to the removable storage via the app from anywhere in the world!
Note: In order to ensure smooth streaming performance, you will need a minimum of 2 Mbit/s upload bandwidth for your routers Internet connection. Streaming performance will vary depending on the quality of your Internet connection. 1. If you are connecting remotely through the mydlink SharePort app from the Internet, you will need a mydlink account. Please refer to mydlink on page 101 for more details. 2. Make sure the device is powered on. Then plug your USB drive into the USB port of the device. Note: If you connect a removable storage with many files or a large capacity, it may take a while for the router to scan and catalog your files. D-Link DIR-510L User Manual 34 USB drive Section 3 - Usage 3. Use your Android mobile device to search for and download the free mydlink SharePort app from Google Play. If you have a QR code reader, you can scan the code for mydlink SharePort to the right. 4. On your mobile device, go to your Wi-Fi settings and connect to your routers wireless network using the default Wi-Fi settings. By default, your wireless network details are:
2.4 GHz Wi-Fi Network Name (SSID): DIR510L
5 GHz Wi-Fi Network Name: DIR510L_5GHz
Password: (leave this blank) D-Link DIR-510L User Manual 35 Section 3 - Usage 5. Once connected, tap the mydlink SharePort icon, and the app will load. 6. At the login page, tap to select between a local access or remote access connection. If you are unsure, tap ? to see descriptions of the two types of connections. Local Access:
Local mode will connect you to storage on your current network. For example, if you are at home connecting to your router, choose this mode. Remote Access:
Remote mode will connect you to storage on your router in a different location. For example, you are at your office connecting to your router at home. D-Link DIR-510L User Manual 36 Section 3 - Usage If you are directly connected to the DIR-510Ls wireless network, tap Local Access and enter the Admin Password of your router, then tap Log In. If you are connecting through the Internet tap Remote Access and enter your mydlink login information, then tap Log In. Tap on your router on the devices page that appears. You can now share your files. After logging in, select your router from the device list. 7. You can now use the mydlink SharePort app interface to stream media and access files stored on your removable drive. The wireless icon at the bottom will be lit blue to indicate a Local Access connection. It will be green to indicate you are connected to the router through Remote Access. Note: If you see a red wireless icon, your routers network environment may not be suitable for a direct network connection and you may experience slow network speeds. D-Link DIR-510L User Manual 37 Section 3 - Usage Main Menu The mydlink SharePort main menu has different sections that let you see all the documents, photos, movies, or music stored on your removable storage. Tap < or >, or swipe left or right to move between the different sections. The Wi-Fi icon at the bottom indicates an active local network connection (blue) or remote connection (green/red). Tap Log In if it is not lit, or Log Out to return to the login page. Tap on the document icon to view documents. Tap the camera icon to view pictures. Tap on the movie icon to play videos. Tap on the music icon to play audio files. Tap on the folder icon to browse all files in a folder view. Tap on the star icon to access your favorite files. Note: Available features may differ depending on the Android OS version of your device. D-Link DIR-510L User Manual 38 Section 3 - Usage Documents The Documents section allows you to share, print, and view documents streamed from your DIR-510L to your mobile device. Tap the document icon on the main menu to browse the files on your mobile device. Search Bar:
Type in the name of a file to search for it. Tap to return to the main menu. Tap to refresh, sort, or mark files for deletion. Tap the star icon next to each file to download it to your device and add it into your Favorites section. Tap for additional options:
Tap to return to the main menu. Tap to update the list of files. Tap to sort the files by name, size, type, or date. Check a file then tap to delete it. D-Link DIR-510L User Manual 39 Section 3 - Usage Tap on a file to start the document viewer. In the viewer:
Tap the screen to bring up zoom in/out buttons.
Drag the screen up or down to scroll between pages. to perform File, Find, Zoom, Reading View, Go To Page, and
Tap Bookmarks actions. Note: Available actions may differ depending on your Android OS. D-Link DIR-510L User Manual 40 Section 3 - Usage Pictures The Pictures section allows you to view images streamed from your DIR-510L to your mobile device. Tap the camera icon on the main menu to browse your photo collection on your removable storage. Search Bar:
Type in the name of a file to search for it. Tap to return to the main menu. Tap to start a slideshow. Tap to refresh, sort, or mark files for deletion. Tap the star icon next to each file to download it to your device and add it into your Favorites section. Tap for additional options:
Tap to return to the main menu. Tap to update the list of files. Tap to sort the files by name, size, type, or date. Check a file then tap to delete it. D-Link DIR-510L User Manual 41 Section 3 - Usage Tap on an image file to start the image viewer. In the viewer:
Tap the star icon to download it to your device and add it into your Favorites section. Tap to start a slideshow. Tap the image to stop the slideshow. Tap to delete the current image. Tap OK to confirm. Tap to bring up additional options using other applications. Tap to access the image editor. Note: This function may vary depending on the version of your Android OS. D-Link DIR-510L User Manual 42 Section 3 - Usage Videos The Videos section allows you to stream video clips and movies from your DIR-510L to your mobile device. Tap the movie icon on the main menu to browse your videos on your removable storage. Search Bar:
Type in the name of a file to search for it. Tap to return to the main menu. Tap to refresh, sort, or mark files for deletion. Tap the star icon next to a file to download it to your device and add it into your Favorites section. Tap for additional options:
Tap to return to the main menu. Tap to update the list of files. Tap to sort the files by name, size, type, or date. Check a file then tap this icon to delete it. D-Link DIR-510L User Manual 43 Section 3 - Usage Tap on a file to start playing it. Tap on the screen to bring up the scroll bar, pause button, and play button. Tap to resume playback. Tap to pause the video. Note: Available features may vary depending on the Android OS version installed on your device. D-Link DIR-510L User Manual 44 Section 3 - Usage Music The Music section allows you to stream songs from your DIR-510L to your mobile device. Tap the music icon on the main menu to browse your music collection on your removable storage. Search Bar:
Type in the name of a file to search for it. Tap to return to the main menu. Tap to refresh, sort, or mark files for deletion. Tap to browse your playlists. Tap the star icon next to a file to download it to your device and add it into your Favorites section. Tap for additional options:
Tap to return to the main menu. Tap to update the list of files. Tap to sort the files by name, size, type, or date. Check a file then tap this icon to delete it. D-Link DIR-510L User Manual 45 Section 3 - Usage Tap on a file to start playing it. In the player:
Tap on the up/down arrow to show/hide the player controls. Tap to repeat all. Tap again to repeat a single song. Tap to skip to the previous/next song. Tap to play or pause the song. Tap to enable/disable shuffle mode. To create a playlist:
Tap
Tap Add new playlist...
Enter a name for the playlist, then tap OK. The name of the playlist will appear in the browser next to the icon.
You can tap then to refresh the playlist page. D-Link DIR-510L User Manual 46 Section 3 - Usage To add songs to a playlist:
Tap a playlist to see its contents.
Tap Add Music... to add songs to the current playlist.
Tick the songs you wish to add and tap to save. To delete songs from the playlist:
Tap Edit in the playlist browser and mark the files to be deleted.
Tap then tap OK to confirm. D-Link DIR-510L User Manual 47 Section 3 - Usage Folders You can browse your removable storage in a folder view in the folders section. Tapping the filename will open the viewer/player for that file type as described in the previous pages. You can also upload files from your mobile device to the removable storage attached to your router. Search Bar:
Type in the name of a file to search for it. Tap to return to the main menu. Tap to access file options. In the file browser:
Tap to return to the main menu. Tap to upload files. Tap to refresh, sort, create a new folder, or mark files for deletion and copying. D-Link DIR-510L User Manual 48 Section 3 - Usage Tap to select files and perform the following actions:
Tap to update the list of files. Tap to sort the files by name, size, type, or date. Tap to create a new folder. Mark a file then tap this icon to delete it. Mark a file then tap this icon to copy it. To delete files:
Tap on
Tap on and tick the box next to a file for deletion. to delete your selected files. Tap OK to confirm. To copy files:
Tap on file for copying. to select files for copying. Tick the box next to each
Tap on to browse to the destination. D-Link DIR-510L User Manual 49 Section 3 - Usage
Tap Paste or Cancel.
You can also tap New Folder if you wish to create a folder in the current directory. To create a new folder:
Browse to the directory you wish to create a new folder in.
Tap then
Enter the name of the folder in the box, then tap OK. D-Link DIR-510L User Manual 50 Section 3 - Usage To upload images and videos from your mobile device:
Browse to the folder you wish to upload to. and browse to the file or files you wish to upload from the
Tap local device.
Tick the box next to each of the files you wish to upload.
Tap Upload. During the upload process, the size of the file and the upload progress will be displayed under the file name.
To remove a file from the upload queue, tap the X next to it. D-Link DIR-510L User Manual 51 Section 3 - Usage Favorites The Favorites section allows you to quickly access your most often used files, no matter what file type, in a special section. Files added to the Favorites section will be copied here for playback in a centralized location. Search Bar:
Type in the name of a file to search for it. Tap to return to the main menu. Tap to refresh, sort, or mark files for deletion. Tap for additional options:
Tap to return to the main menu. Tap to update the list of files. Tap to sort the files by name, size, type, or date. Check a file then tap to delete it. D-Link DIR-510L User Manual 52 Section 3 - Usage Using SharePort Mobile for Windows 8/RT The SharePort Mobile app is a streamlined mobile application that allows you to conveniently stream media and share files stored on a removable storage connected to your router. Once the router is set up, you can start the app and easily connect from a local network to access your photos, videos, music, and documents. Then, you can upload files and photos from your mobile device to your routers removable storage via the app wirelessly!
1. Make sure the device is powered on. Then plug your USB drive into the USB port of the device. Note: If you connect a removable USB drive with many files or a large capacity, it may take a while for the router to scan and catalog your files. D-Link DIR-510L User Manual 53 USB drive Section 3 - Usage 2. Use your Windows 8/RT mobile device to search for and download the free SharePort Mobile app from the Windows store. 3. On your mobile device, go to your Wi-Fi settings and connect to your routers wireless network using the default Wi-Fi settings. By default, your wireless network details are:
2.4 GHz Wi-Fi Network Name (SSID): DIR510L
5 GHz Wi-Fi Network Name: DIR510L_5GHz
Password: (leave this blank) 4. Once connected, tap the SharePort Mobile icon, and the app will load. 5. At the main menu, if you see any greyed out icons, swipe the right edge of the screen to bring up Settings. Then tap SharePort Settings and enter your admin password. Tap on the back icon to exit settings and log in. Once you are logged in, all of the menu icons will be lit to indicate a successful connection. D-Link DIR-510L User Manual 54 Section 3 - Usage 6. You can now use the SharePort Mobile app interface to stream media and access files stored on your removable drive. D-Link DIR-510L User Manual 55 Section 3 - Usage Main Menu The SharePort Mobile main menu has different sections that let you see all the documents, photos, movies, or music stored on your removable storage. Tap an icon to access your files by type. In each section, you can tap at any time to go back. Tap on the document icon to view documents. Tap the camera icon to view pictures. Tap on the movie icon to play videos. Tap on the music icon to play audio files. Tap on the folder icon to browse all files in a folder view. Tap on the star icon to access your favorite files. D-Link DIR-510L User Manual 56 Section 3 - Usage Documents The Documents section allows you to share, print, and view documents streamed from your DIR-510L to your mobile device. Tap the document icon on the main menu to browse the documents on your mobile device. In the documents browser, tap the document to open it with a third-
party application. Tap to sort files by... Tap to refresh the list of files. Tap to select files to be added as a favorite or deleted. Tapping Edit and selecting one or more files gives you the following options:
Tap to leave the editing screen. Tap to add the file to Favorite and download it to your local device. Tap to delete the selected file or files. Tap to deselect all selected files. D-Link DIR-510L User Manual 57 Section 3 - Usage Pictures The Pictures section allows you to stream images from your DIR-510L to your mobile device. Tap the camera icon on the main menu to browse your photo collection on your removable storage. In the image browser, tap the image to open it. Tap to start a slideshow of your images. Tap to sort files by.... Tap to refresh the list of files. Tap to select files to be added as a favorite or deleted. Tapping Edit and selecting a file gives you the following options:
Tap to leave the editing screen. Tap to add the file to Favorite and download it to your local device. Tap to delete the selected file or files. Tap to deselect all selected files. D-Link DIR-510L User Manual 58 Section 3 - Usage In the image viewer:
Tap to start a slideshow of your images. Tap to open, mark as favorite, or delete the image. After tapping Edit:
Tap to leave the editing screen. Tap to add the file to Favorite and download it to your local device. Tap to delete the selected file or files. D-Link DIR-510L User Manual 59 Section 3 - Usage Movies The Movies section allows you to stream video clips and movies from your DIR-510L to your mobile device. Tap the movie icon on the main menu to browse your videos on your removable storage. In the movies browser, tap the file to play it. Tap to sort files by.... Tap to refresh the list of files. Tap to select files to be added as a favorite or deleted. Tapping Edit and selecting a file gives you the following options:
Tap to leave the editing screen. Tap to add the file to Favorite and download it to your local device. Tap to delete the selected file or files. Tap to deselect all selected files. D-Link DIR-510L User Manual 60 Section 3 - Usage Tap on a file to start playing it. In the player:
Tap to play/pause the video. You can scroll to any time on the time line by holding and sliding your finger. Tap to enter/exit fullscreen mode. Tap to adjust the volume. Tap to add or delete the file. After tapping Edit:
Tap to leave the editing screen. Tap to return to the main menu. Tap to add the file to Favorite and download it to your local device. Tap to delete the file. D-Link DIR-510L User Manual 61 Section 3 - Usage Music The Music section allows you to stream songs from your DIR-510L to your mobile device. Tap the music icon on the main menu to browse your music collection on your removable storage. In the music browser, tap a file to play it with the music player. Tap to repeat one or all songs. Tap to enable/disable shuffle mode. Tap to sort files by.... Tap to refresh the list of files. Tap to select files to be added as a favorite or deleted. Tapping Edit and selecting a file will show:
Tap to leave the editing screen. Tap to add selected songs to a new play list. Tap to add the file to Favorite and download it to your local device. Tap to delete the selected file or files. Tap to deselect all selected files. D-Link DIR-510L User Manual 62 Section 3 - Usage Tap on a file to start playing it. In the player:
Tap to play/pause the song. Tap to skip to the previous/next song. Tap to stop playback. Tap to adjust the volume. To create a playlist:
Tap Edit, then select songs to be added to a new playlist.
Tap Add Playlist.
Enter a name for the playlist, then tap Save. The playlist will appear in the browser as an icon. To add songs to a playlist:
Tap your playlist to see its current contents.
Tap Edit.
Tap Add. D-Link DIR-510L User Manual 63 Section 3 - Usage
Select songs to be added to your playlist, then tap Add. To delete songs from your playlist:
Tap your playlist to see its current contents.
Tap Edit in the playlist browser and mark the files to be deleted.
Tap Delete to remove the file. D-Link DIR-510L User Manual 64 Section 3 - Usage Folder You can browse your removable storage in a folder view in the Folder section. Tapping the filename will open the viewer/player for that file type as described in the previous pages. You can also upload files from your mobile device to the removable storage attached to your router here. In the browser, tap the file to open it. Tap to sort files by.... Tap to refresh the list of files. Tap to upload files, create a new folder, or select files to be copied, opened, favorited or deleted. Tapping Edit will show:
Tap to return to the main menu. Tap to upload a file from your device. Tap to create a new folder. D-Link DIR-510L User Manual 65 Section 3 - Usage Tapping Edit and selecting a file gives you the following options:
Tap to leave the editing screen. Tap to return to the main menu. Tap to copy selected files. Tap to add the file to Favorite and download it to your local device. Tap to delete the selected file or files. Tap to deselect all selected files. To delete files:
Browse to the folder with the file to be deleted.
Tap Edit in the browser and mark the file to be deleted.
Tap Delete to delete the file. To copy files:
Select the file to be copied and tap Copy.
Browse to and select the destination folder.
Tap Choose to copy the file to that folder. D-Link DIR-510L User Manual 66 Section 3 - Usage To create a new folder:
Browse to the directory you wish to create a new folder in.
Tap Edit at the top right.
Tap New Folder and enter the name of the new folder.
Tap Save to create the folder. To upload images and videos from your mobile device:
Browse to the folder you wish to upload to.
Tap Upload. In the Upload screen, tap Upload to bring up Windows file browser.
Select your files to be uploaded from your device to the USB storage and tap Open. The files will begin uploading.
During the upload process, you can tap the upload queue files to delete them from the queue.
To upload more files, tap the Upload icon at the top right and repeat the steps above. D-Link DIR-510L User Manual 67 Section 3 - Usage Favorite The Favorite section allows you to quickly access your most often used files, no matter what file type, in a special section. Files added to this section will be copied here for playback in a centralized location. In the Favorite browser, tap the file to open it. Tap to refresh the list of files. Tap to select files to be opened or deleted. Tapping Edit and selecting a file gives you the following options:
Tap to leave the editing screen. Tap to delete the selected file or files. Tap to deselect all selected files. D-Link DIR-510L User Manual 68 Section 3 - Usage Using SharePort Web Access SharePort Web Access lets you stream music, photos, and movies from a USB drive attached to your DIR-510L through a Web browser. You can also download and upload files to and from a computer through the Web browser interface.
Type http://shareport.local. in your browsers URL to take you to the SharePort Web Access log in page.
Log in with your admin password or a SharePort Username and Password. At the main menu, you can browse the files stored on your USB drive by file type.
Click to browse by folders. D-Link DIR-510L User Manual 69 Section 3 - Usage The folder browser section will show folder hierarchy at the left and files at the right. You can quickly browse directories and perform operations by using the buttons in the folder browser view.
Click to return to the main menu. To create a new folder:
Click New Folder in the current directory.
Enter a folder name in the Create Folder pop-up.
Click OK. The new folder will appear in the left column. To upload a file:
Click Upload to upload a file to the current folder.
In the pop-up browse to the file you wish to upload.
Click OK. The file will appear after the browser refreshes. To delete a file:
Tick the checkbox next to the files you wish to delete.
Click Delete and a dialog box will appear.
Click OK to confirm. D-Link DIR-510L User Manual 70 Section 3 - Usage Music You can go to the Music section to browse and play the music files on your storage. Click Back to return to the main menu.
Click on the audio filename to play it in the browser. You can pause, seek, mute and adjust the volume in the window.
Close the window to end playback. D-Link DIR-510L User Manual 71 Section 3 - Usage Pictures You can go to the Pictures section to browse and view the image files on your storage. Click Back to return to the main menu.
Click on the image name to view it in the browser.
Hover your mouse over the left or right side of the image and click < or > to view the previous or next image. D-Link DIR-510L User Manual 72 Section 3 - Usage Videos You can go to the Videos section to browse and play the video files on your storage. Click Back to return to the main menu.
Click on the video file to open the file in a window for streaming. You can pause, seek, mute, adjust the volume, and activate full screen mode in the window controls.
Close the window to end playback. Note: Depending on your browser, the video file may be played back using the default player associated with that file format. D-Link DIR-510L User Manual 73 Section 3 - Usage Documents You can go to the Documents section to open and save files from your storage to your computer. Click Back to return to the main menu.
Click on the filename to open the file.
Depending on the file type, the default program will be started or a pop-up may ask you to open or save the file. D-Link DIR-510L User Manual 74 Section 4 - Configuration Before you can use your DIR-510L, you will need to access its configuration utility by using a Web browser. Configuration
To access the configuration utility of the DIR-510L, open a Web browser and enter http://dlinkrouter.local. or http://dlinkrouter in the address bar.
Enter your password for the Admin account. By default, the password is blank.
Click Log In. The routers home page will open, and you can check its current status, start a wizard, and navigate to the different settings of the DIR-510L. The bar at the top of the page has quick access to Settings and Management functions, and you may quickly jump back Home at any time. Note: The system will automatically log out after a period of inactivity. D-Link DIR-510L User Manual 75 Section 4 - Configuration Home The Home page will display a diagram with icons indicating the statuses of various functions and connections. Clicking on an icon with an to configure your Internet connection.
, this means your router has been assigned an uplink IP but does not have Internet access. If the link to the Internet shows You will need to contact your service provider. If the link is showing a next to it will start a wizard for that function. You may also click on the
, it means you are connected to the Internet. Internet:
The Internet icon indicates the status of the Internet connection to the router. It is grey if there is no connection, and blue if a connection is established. DIR-510L:
The router icon indicates the status of the Wi-Fi security on the DIR-510L. It is grey if it is unsecured, and blue if your Wi-Fi network name (SSID) and password have been set. Wi-Fi Clients:
The Wi-Fi icon indicates if there are clients currently connected to the router via Wi-Fi. It will be blue if there are active connections. USB Storage:
The USB icon will be blue if you have connected a USB storage device to the router. D-Link DIR-510L User Manual 76 Section 4 - Configuration Internet Broadband Ethernet If you have connected the DIR-510L to a cable modem via an Ethernet cable, your Internet should be connected and ready for use. The Internet icon will be blue and the connection will have a check mark
. If you have connected the DIR-510L to an xDSL modem via an Ethernet cable but can not access the Internet:
Click on the Internet icon to start the wizard.
Enter the Username and Password as provided by your Internet Service Provider.
Click Save. D-Link DIR-510L User Manual 77 Section 4 - Configuration Once you are connected:
Click on the Internet icon to display the IPv4 network details below the diagram. You can view the IPv6 details by clicking at the top right. Note: This information will be saved as an xDSL Broadband (PPPoE) Internet Profile for future use.
Click on DHCP Release if you wish to disconnect from the Internet.
To reconnect to the Internet, you may click the Internet icon and then click Connect in the pop-up dialog to enable DHCP. D-Link DIR-510L User Manual 78 Section 4 - Configuration You can connect a compatible 3G/4G USB adapter to the USB port on the DIR-510L to access the Internet. Depending on your mobile service provider, you may have to input optional settings before use. You may need to contact your service provider regarding these details. 3G/4G Mobile Broadband PIN code
(optional):
Enter the 4-digit PIN for your SIM card.
Click Save to store the settings. APN:
Enter your service providers APN. Dial-Up Num-
ber (optional):
Enter the dial-up number required by your service provider. Username
(optional):
Password
(optional):
Enter the username provided by your service provider. Enter the password provided by your service provider.
Click Save to store the settings. D-Link DIR-510L User Manual 79 Section 4 - Configuration When you are connected to the Internet via mobile broadband, the Internet icon should be blue and the link will have a green check mark Clicking on the Internet icon will display the 3G/4G network details. You may click on the Disconnect button to drop the 3G/4G connection . Connection Type:
Displays whether it is a 3G/4G network. Operator:
Displays the country name and service provider. Network Status:
Displays the status of the connection to the 3G/4G network. Connection Up Time:
Displays the number of days, hours, minutes, and seconds the router has been connected to the 3G/4G network. MAC Address:
Displays the MAC address of the 3G/4G adapter. IP Address:
Displays the IP address provided to the router. Subnet Mask:
Displays the subnet mask of the 3G/ 4G network. Default Gateway:
Displays the default gateway of the 3G/4G network. Primary DNS Server:
Secondary DNS Server:
Displays the primary DNS server of the 3G/4G network. Displays the secondary DNS server of the 3G/4G network. D-Link DIR-510L User Manual 80 Section 4 - Configuration Wi-Fi Hotspot On the Home page, when you wish to connect to the Internet via a Wi-Fi hotspot, there will be a Click it to start the wizard. next to the Internet icon.
Click Next to scan available Wi-Fi networks.
Click on the hotspot network you wish to connect to and click Select.
You will need to enter a password if there is a lock icon next to that network. Enter the password and click Save. You will need to wait while the router connects to the network. D-Link DIR-510L User Manual 81 Section 4 - Configuration Once you are connected, the Internet icon will be blue and the status diagram will show a green check mark when the connection is established. You can now click on the Internet icon in the Current Status diagram to see details of the connection. You may also click on the button to Disconnect from this network . Connection Type:
Displays whether it is a hotspot network connection. Network Status:
Hotspot Name (SSID):
Displays the status of the connection to the hotspot network. Displays the SSID or the name of the hotspot network. Password:
Displays the password of the hotspot network. Connection Up Time:
Displays the number of days, hours, minutes, and seconds the router has been connected to the hotspot network. MAC Address:
Displays the MAC address of the hotspot router. IP Address:
Displays the IP address provided to the router. Subnet Mask:
Displays the subnet mask of the hotspot network. Default Gateway:
Displays the default gateway of the hotspot network. Primary DNS Server:
Displays the primary DNS server of the hotspot network. Secondary DNS Server:
Displays the secondary DNS server of the hotspot network. Note: These connection details will be saved as a Wi-Fi Hotspot under Internet Profiles to allow automatic connections to this network in the future. For more information, please refer to Internet Profiles on page 87. D-Link DIR-510L User Manual 82 Section 4 - Configuration Router On the home page, you can proceed to secure your wireless network. To secure your network, you may customize your Wi-Fi Network Name (SSID) and Password by clicking on the router icon. You may also customize the 2.4 GHz and 5 GHz network settings independently.
Click on the router icon with the start the wizard. next to DIR-510L to
Click Secure your network in the pop-up. On the Wi-Fi Settings page, you can customize the Wi-Fi Network Name (SSID) and Password for both bands. Note: Enter a password with a minimum of 8 characters.
Click Save. The settings will take effect and you will be disconnected from the network. D-Link DIR-510L User Manual 83 Section 4 - Configuration Devices may now connect to the network using the new SSID and will no longer be displayed on the Home page. password. The
Clicking on the router icon will now display Network, Wi-Fi, and Guest Zone information.
Clicking on the links will take you to their respective pages under Settings where you can further configure advanced settings. For Network, please refer to Network (LAN) on page 95. For Wi-Fi, please refer to Wi-Fi on page 93. For Guest Zone, please refer to Guest Zone on page 100. D-Link DIR-510L User Manual 84 Section 4 - Configuration On the Home page, clicking on the Wi-Fi Clients icon takes you to a page where you can see a list of all devices connected to your Wi-Fi network on both the 2.4 GHz and 5 GHz bands. Wi-Fi Clients
Click on the Wi-Fi icon to access Wi-Fi client details. The box for each device will show its connection status, name, vendor, IP address, and access status. To change the settings for each device, you can click on the pencil icon to bring up a new window. Name:
Enter a custom name for this client. Vendor:
Displays the vendor of the device. IP Address:
Enter a specific IP address for this client. Reserved IP:
Enable to reserve this IP address for this client. Access:
Allow or Block access to the router.
Click Save when you are done. D-Link DIR-510L User Manual 85 Section 4 - Configuration If you have a USB drive attached to the DIR-510L, you can view the storage details from the Home page via the USB Storage pane. USB Storage
Click on the USB Storage icon to access storage details. Available Space:
Displays the amount of free space on the USB storage. USB1/USB2 Total:
Displays the total capacity of the USB storage. DLNA MEDIA SERVER Status:
Displays if DLNA is enabled or disabled. Service Name:
Displays the name of the DLNA server as it appears to other devices on the network. SHAREPORT Status: Displays if SharePort is enabled or disabled. For more information on DLNA and SharePort settings, please refer to SharePort on page 97. D-Link DIR-510L User Manual 86 Section 4 - Configuration Settings Internet Profiles Internet Profiles are networks you want the device to remember and reconnect to in the future. Profiles are created automatically the first time you connect to a particular network. The Profile List shows all of the saved profiles and you can select the profile you wish to use by clicking on the radio button. You may also Add, Edit, and Delete profiles from this page. To Add a profile:
Click Add Profile.
On the next screen, select a connection type from the drop down menu.
Fill in the required information under the connection type. If required, click on Advanced Settings... to fill in details required by the ISP.
Click Save to store the profile. To Edit a profile:
Click on the pencil icon next to the profile you want to edit. To Delete a profile:
Click on the trash icon next to the profile you want to delete. D-Link DIR-510L User Manual 87 Section 4 - Configuration DHCP Depending on your connection method and your service provider, you may select the default DHCP profile to automatically connect to the Internet. Click on the pencil to edit it. Click Save to store your settings. Host Name:
Enter the name of your host. MAC Address Clone:
Type in the MAC address or select the client from the drop-down menu and click <<. D-Link DIR-510L User Manual 88 Section 4 - Configuration Depending on your Internet Service Provider, you may need to configure the PPPoE settings in order to connect to the Internet. You may need to contact your ISP for this information. Click Save to store your settings. xDSL Broadband (PPPoE) My Internet Connection is:
Select xDSL Broadband (PPPoE) from the drop-down list. Profile Name:
Enter a custom name for this profile. Username:
Enter the username assigned by your ISP. Password:
Enter the password assigned by your ISP. ADVANCED SETTINGS Address Mode:
Select Static IP if your ISP assigned you the IP address, Subnet Mask, ateway, and DNS Server addresses. Otherwise, select Dynamic. Service Name:
Enter the ISP Service Name (optional). Reconnect Mode:
Select either Always-on, On-Demand, or Manual. Primary DNS Address:
Secondary DNS Address:
Enter the Primary DNS Server Address. Enter the Secondary DNS Server Address. MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU. Note: If you are using a PPPoE connection, you will need to remove or disable any PPPoE client software running on your computers. D-Link DIR-510L User Manual 89 Section 4 - Configuration Depending on the service provider for your 3G/4G wireless service, you may need to configure the 3G/4G settings in order to connect to the Internet. You may need to contact your ISP for this information. Click Save to store your settings. 3G/4G Wireless USB My Internet Connection Is:
Select 3G/4G Wireless USB from the drop-down list. Profile Name:
Enter a custom name for this profile. Dial-up Number:
Enter your service providers dial-up number. APN:
Enter the password assigned by your ISP. ADVANCED SETTINGS Country:
Select the country of your service provider. ISP:
Select your provider from the drop-down menu. Username:
Enter the username assigned by your service provider. Password:
Enter the password assigned by your service provider. Authentication Protocol:
Select between Auto(PAP+CHAP), PAP, or CHAP, depending on your service provider. SIM Card Status:
Displays whether your SIM card is locked or unlocked. Reconnect Mode:
Select between Always-on, On Demand, or Manual. MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU. D-Link DIR-510L User Manual 90 Section 4 - Configuration This is the Wi-Fi Hotspot page; you may need to configure the settings in order to connect to the Internet. You may need to contact your hotspot provider for this information. Click Save to store your settings. Wi-Fi Hotspot Client Hotspot Network Name (SSID):
Enter the name of your hotspot or click Scan to select from a list. Please refer to Wi-Fi Hotspot on page 81 for detailed steps. Security:
Select None, WEP, or WPA/WPA2-Personal encryption depending on the security of your hotspot. Password:
Enter the hotspot network password. D-Link DIR-510L User Manual 91 Section 4 - Configuration Static IP Depending on your Internet Service Provider, you may need to configure the static IP settings in order to connect to the Internet. You may need to contact your service provider for this information. Click Save to store your settings. My Internet Connection Is:
Select Static IP from the drop-down list. IP Address:
Enter the IP address assigned by your ISP. Subnet Mask:
Enter the Subnet Mask assigned by your ISP. Default Gateway:
Enter the Gateway assigned by your ISP. Primary DNS Address:
Secondary DNS Address:
Enter the Primary DNS Address assigned by your ISP. ADVANCED SETTINGS Enter the Secondary DNS Address assigned by your ISP. MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU. D-Link DIR-510L User Manual 92 Section 4 - Configuration Wi-Fi To secure your Wi-Fi network manually and/or access advanced settings, you can go to the Wi-Fi page under Settings. You can configure the settings for both the 2.4 GHz and 5 GHz bands on this page. Click Save to store your settings. Wi-Fi Network Name
(SSID):
Enter a custom name for your 2.4 GHz network. 2.4 GHz Password:
Enter a custom password for your network. ADVANCED SETTINGS Security Mode:
Select from None or WPA/WPA2-Personal 802.11 Mode:
802.11b Only - Select only if all of your wireless clients are 802.11b. 802.11g Only - Select only if all of your wireless clients are 802.11g. 802.11n Only - Select only if all of your wireless clients are 802.11n. Mixed 802.11g/b - Select if you are using both 802.11g and 802.11b wireless clients. Mixed 802.11n/g - Select if you are using both 802.11n and 802.11g wireless clients. Mixed 802.11b/g/n - Select if you are using both 802.11b, 802.11g, and 802.11n wireless clients. Wi-Fi Channel:
Change the channel setting for the DIR-510L. By default the channel is set to Auto. Transmission Power:
Select from High, Medium, or Low. Channel Width:
Select between Auto 20/40 MHz or 20 MHz. D-Link DIR-510L User Manual 93 Section 4 - Configuration 5 GHz Wi-Fi Network Name
(SSID):
Enter a custom name for your 5 GHz network. Password:
Enter a custom password for your network. ADVANCED SETTINGS Security Mode:
Select from None or WPA/WPA2-Personal 802.11 Mode:
802.11a Only - Select only if all of your wireless clients are 802.11b. 802.11n Only - Select only if all of your wireless clients are 802.11g. Mixed 802.11a/n - Select if you are using both 802.11a and 802.11n wireless clients. Mixed 802.11a/n/ac - Select if you are using both 802.11a 802.11n, and 802.11ac wireless clients. Wi-Fi Channel:
Change the channel setting for the DIR-510L. By default the channel is set to Auto. Transmission Power:
Select from High, Medium, or Low. Channel Width:
Select between Auto 20/40/80, Auto 20/40 MHz, or 20 MHz. D-Link DIR-510L User Manual 94 Section 4 - Configuration You can configure the local network settings for your router by going to Network (LAN) under Settings. Click Save to store your settings. Network (LAN) NETWORK SETTINGS Device IP Address:
Enter the IP address of the router. The default IP address is 192.168.0.1. If you change the IP address, once you click Save Settings, you will need to enter the new IP address in your browser to get back into the configuration utility. Subnet Mask:
Enter the Subnet Mask. The default subnet mask is 255.255.255.0. Device Name:
Enter a name for the router. Local Domain Name:
Enter the Domain name (Optional). Enable DNS Relay:
Disable DNS Relay to transfer the DNS server information from your ISP to your computers. If enabled, your computers will use the router for a DNS server. D-Link DIR-510L User Manual 95 Section 4 - Configuration DHCP SERVER Status:
Slide to enable or disable the DHCP server function. DHCP IP Address Range:
Enter the starting and ending IP addresses for the DHCP servers IP assignment. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. DHCP Lease Time:
The length of time for the IP address lease. Enter the Lease time in minutes. Always Broadcast:
Enable this feature to broadcast your networks DHCP server to LAN/WLAN clients. D-Link DIR-510L User Manual 96 Section 4 - Configuration SharePort On this page, you can configure the various storage sharing features of your router. The DLNA server allows you to stream stored pictures, music, and video to another DLNA-compatible device on your network. SharePort Web Access allows you to use a Web browser to access stored files from a PC connected to your network. Click Save to store your settings. DLNA MEDIA SERVER Status:
Slide to enable or disable the DLNA Media Server function. DLNA Media Server Name:
Enter a name for the DLNA Media Server. SHAREPORT WEB ACCESS Status:
Slide to enable or disable the SharePort Web Access function. Direct Links:
Click on the first link to reach your SharePort page using HTTP protocol. Click on the second link to reach your SharePort page using HTTPS protocol. D-Link DIR-510L User Manual 97 Section 4 - Configuration You can manage your user accounts and their access privileges for SharePort Web Access by clicking on the Users tab. The User List displays the Username, Access Path, and Permissions of all saved users. USERS
To Edit a user, click on the pencil icon.
To Delete a user, click on the trash icon.
To Create a user, click on Create a New User +. A window with the following fields will appear:
Username:
Enter a username for the new user. Password:
Enter a password for the new user. Permissions:
Select Read Only or Read/Write privileges from the drop-
down. Folder:
Click Browse to select a folder that you want this user to access. You can browse to lower directories by clicking on the rightward-facing arrow. Click on the folder name to add it. Then, click Append. If you wish to add multiple sub-directories, repeat the steps above. Click Save.
Click Save to store your settings. D-Link DIR-510L User Manual 98 Section 4 - Configuration You can now log in to SharePort Web Access with any of the accounts you created by typing http://shareport.local. in your browser URL to access the log in page. D-Link DIR-510L User Manual 99 Section 4 - Configuration Guest Zone You can create a Wi-Fi Guest Zone to share Internet access with guests on a separate Wi-Fi network for both the 2.4 GHz and 5 GHz networks. This is useful when you wish to block guests from accessing devices on your home network. Status:
Enable or disable the Guest Zone feature. Guest Zone Wi-Fi Name (SSID):
Enter a custom Guest Zone name. Password:
Enter a password for your Guest Zone. Allow Local Access:
Enable or disable this feature to allow or block guests from accessing devices and files on your network.
Click Save to store the settings. D-Link DIR-510L User Manual 100 Section 4 - Configuration mydlink Setting and registering your router with mydlink will allow you to use its mydlink cloud services features, including online access and management of your router through the mydlink portal website. If you have an existing account:
Select Yes, I have a mydlink account.
Log in with the E-mail address and password that you signed up with.
Click the Save button. D-Link DIR-510L User Manual 101 Section 4 - Configuration If you do not have an account:
Select No, I want to create a new mydlink account.
Fill in the following fields.
Read and tick the checkbox next to I accept the mydlink terms and conditions.
Click the Sign Up button. Note: If you have not set an admin password, you will be asked to do so now. Click Save. D-Link DIR-510L User Manual 102 Section 4 - Configuration Accessing Settings>mydlink will now display a summary of your mydlink Service status and mydlink Account. Note: After mydlink registration is completed, your routers default PPPoE connection will be set to Always On. If your ISP charges for usage, you may wish to manually choose Dial On Demand as your default setting, however, mydlink features may not work as intended. D-Link DIR-510L User Manual 103 Section 4 - Configuration Management Admin On this page, you can change the admin security settings for logging in to the router configuration interface. It is highly recommended that you create a password with a minimum of 6 characters to keep your router secure. Click Save to store your settings. Admin Password:
Enter a password to secure administrative access to your router. Enable Graphical Authentication
(CAPTCHA):
If enabled, you will be required to enter a CAPTCHA along with your password at the log in page. You will need to log back into the configuration interface with the new password. If CAPTCHA has been enabled, you will need to enter the 4-digit code as well. D-Link DIR-510L User Manual 104 Section 4 - Configuration System Here, you can save or restore your router settings to and from a file. You can also reset your router to the factory default settings and reboot the router. Save Settings to Local Hard Drive:
Use this option to save the current router configuration settings to a file on the hard disk of the computer you are using. First, click the Save Settings to File button. A file dialog will appear, allowing you to select a location and file name for the settings. Load Settings from Local Hard Drive:
Use this option to load previously saved router configuration settings. First, click the Select File button to find a previously saved file of configuration settings. Then, click the Restore Settings From File button to transfer those settings to the router. Reset to Factory Default Settings:
This option will restore all configuration settings back to the settings that were in effect at the time the router was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. Clicking OK in the window will require you to reconnect to this device using the default SSID and password. Reboot Device:
Click to reboot the router. Note: Resetting your router here or via the RESET button will have the same effect as Reset to Factory Default Settings. D-Link DIR-510L User Manual 105 Section 4 - Configuration Upgrade This page displays your current firmware version and language pack, and allows you to check for and download new firmware. After downloading the firmware, you can then upload it from this page. If you are using a language pack for your web UI, we recommend that you also download the latest version when upgrading the firmware to ensure that any changes in the interface are shown correctly. FIRMWARE INFORMATION Displays the version of the installed firmware. Displays the date of the installed firmware. Current Firmware Version:
Current Firmware Date:
Click Check for New Firmware to retrieve the latest version. Current Language Pack:
LANGUAGE PACK INFORMATION Displays the installed language pack. You can select your language on the login page. Click Remove to uninstall any previously installed language packs. UPGRADE MANUALLY Upgrade Firmware:
Click Select File to open a window and select a downloaded firmware file. Click Upload to install it. Add a Language Pack:
Click Select File to install a downloaded language pack. Click Upload to install it. D-Link DIR-510L User Manual 106 Section 5 - Status Statistics This page provides statistics about data transmitted and received by your router through the Internet (WAN) on your routers 2.4 GHz and 5 GHz wireless networks. It also displays the status of the internal battery. The graph displays the real-time upstream and downstream transfer speeds depending on which tab (Internet or Wi-Fi) you are currently viewing. The Blue line indicates the upload speeds and the red line indicates the download speeds. Click Clear to reset the statistics. The table below displays the following in real-time:
Total Packets
Total Byte(s)
Total Kbit(s)
Kbits/sec
Session (Internet only) The Session box displays the number of active Internet sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer. The Battery tab shows the remaining charge in percent. D-Link DIR-510L User Manual 107 107 Section 6 - Connecting a Wireless Client Connecting a Wireless Client WPS Button The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button
(or a software utility with WPS) that you can press to connect to the router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS. To connect a client, follow the steps below:
To connect your wireless devices to the router using WPS:
Step 1 - Press the WPS button on the router for about 1 second. The Power/Status LED will start to blink. Step 2 - Within 2 minutes, press the WPS button on your wireless client
(or launch the software utility and start the WPS process). Step 3 - Allow up to 1 minute to configure. Once the Power/Status LED stops blinking, you will be connected and your wireless connection will be secure with WPA2. WPS Button D-Link DIR-510L User Manual 108 Section 6 - Connecting a Wireless Client Windows 8 WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used. To join an existing network, locate the wireless network icon in the taskbar, next to the time display. Wireless Icon Clicking on this icon will display a list of wireless networks which are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DIR-510L User Manual 109 Section 6 - Connecting a Wireless Client You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router at this point to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected. D-Link DIR-510L User Manual 110 Section 6 - Connecting a Wireless Client Windows 7 WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. Wireless Icon D-Link DIR-510L User Manual 111 Section 6 - Connecting a Wireless Client 3. Highlight the wireless connection with Wi-Fi name (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-510L User Manual 112 Section 6 - Connecting a Wireless Client 5. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. You can also connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-510L User Manual 113 Section 6 - Connecting a Wireless Client Windows Vista Windows Vista users may use the built-in wireless utility. If you are using a third-party utility or Windows 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a site survey option similar to the Windows Vista utility as seen below. If you receive the Wireless Networks Detected pop-up, click on the center of the window to access the utility. Right-click on the wireless computer icon in your system tray (lower-
right corner next to the time). Select Connect to a network. or The utility will display available wireless networks in your area. Select a network (displayed using the SSID) and click the Connect button. If you have a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-510L User Manual 114 Section 6 - Connecting a Wireless Client WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Open the Windows Vista Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-510L User Manual 115 Section 6 - Connecting a Wireless Client 3. Enter the same security key or passphrase that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-510L User Manual 116 Section 6 - Connecting a Wireless Client Windows XP Windows XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are using another companys utility, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a site survey option similar to the Windows XP utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select View Available Wireless Networks. The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/
IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-510L User Manual 117 Section 6 - Connecting a Wireless Client WPA/WPA2 It is recommended to enable WPA on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WPA key being used. 1. Open the Windows XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-510L User Manual 118 Section 6 - Connecting a Wireless Client 3. The Wireless Network Connection box will appear. Enter the WPA-
PSK passphrase and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Link DIR-510L User Manual 119 Section 7 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DIR-510L. Read the following descriptions if you are having problems. The examples below are illustrated in Windows XP. If you have a different operating system, the screenshots on your computer will look similar to the following examples. 1. Why cant I access the web-based configuration?
When entering http://dlinkrouter.local., you are not connecting to a website nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. Make sure you have an updated Java-enabled Web browser. We recommend the following:
Microsoft Internet Explorer 8.0 or higher
Mozilla Firefox 12.0 or higher
Google Chrome 20 or higher
Safari 4.0 or higher Verify wireless connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different device if possible. Disable any Internet security software running on the computer. Software firewalls such as ZoneAlarm, BlackICE, Sygate, Norton Personal Firewall, and Windows XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DIR-510L User Manual 120 Section 7 - Troubleshooting Configure your Internet settings:
Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults.
Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK.
Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.
Close your Web browser (if open) and open it. Access the web management. Open your Web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management. If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 60 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer. 2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back to the factory defaults. To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 60 seconds to access the router. The default IP address is 192.168.0.1 or you may be able to reach the router at http://dlinkrouter.local./ or http://dlinkrouter/. When logging in, leave the admin password box empty. D-Link DIR-510L User Manual 121 Section 7 - Troubleshooting 3. Why cant I connect to certain sites or send and receive emails when connecting through my router?
If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc). To find the proper MTU Size, youll have to do a special ping of the destination youre trying to go to. A destination could be another computer, or a URL.
Click on Start and then click Run.
Windows 95, 98, and Me users type in command (Windows NT, 2000, XP, Vista, and 7 users type in cmd) and press Enter
(or click OK).
Once the window opens, youll need to do a special ping. Use the following syntax:
ping [url] [-f] [-l] [MTU value]
Example: ping yahoo.com -f -l 1472 You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network were working with (1452+28=1480). Once you find your MTU, you can now configure your router with the proper MTU size. D-Link DIR-510L User Manual 122 Section 7 - Troubleshooting To change the MTU rate on your router follow the steps below:
Open your browser, enter the IP address of your router (192.168.0.1, http://dlinkrouter.local. or http://dlinkrouter) and click OK.
Enter your username (admin) and password (blank by default). Click OK to enter the web configuration page for the device.
Click on Setup and then click Manual Configure.
To change the MTU enter the number in the MTU field and click Save Settings to save your settings.
Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-510L User Manual 123 Section 7 - Troubleshooting 4. What happens if the power is cut during firmware upgrade?
If you cant connect to your device or are having a problem connecting to the admin page, your router may be in recovery mode. This is indicated by a steady blinking orange Power/Status LED. To recover your device:
Connect an Ethernet cable from the router to your computer.
Open a Web browser and enter the IP of your router
(http://dlinkrouter or http://dlinkrouter.local. or 192.168.0.1) and press Enter.
The page will show D-link Router Recovery Mode. Click Browse to select your current or a newer firmware.
Click Open to load it.
Click Upgrade.
When the screen shows Upgrade Successfully, unplug the Ethernet cable and power off and on the device.
Please refer to Connecting to Your DIR-510L on page 14 to setup your router. D-Link DIR-510L User Manual 124 Appendix A - Wireless Basics Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers. A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link. D-Link DIR-510L User Manual 125 Appendix A - Wireless Basics What is Wireless?
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or office network. Why D-Link Wireless?
D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How does wireless work?
Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two different types of wireless networks Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN). Wireless Local Area Network (WLAN) In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point, the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other outdoor venues. D-Link DIR-510L User Manual 126 Appendix A - Wireless Basics Wireless Personal Area Network (WPAN) Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesnt use nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries. Who uses wireless?
Wireless technology as become so popular in recent years that almost everyone is using it, whether its for home, office, business, D-Link has a wireless solution for it. Home
Small Office and Home Office
D-Link DIR-510L User Manual 127 Appendix A - Wireless Basics Where is wireless used?
Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobility and its becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called hotspots. Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers. Wireless network is easy to setup, but if youre installing it for the first time it could be quite a task not knowing where to start. Thats why weve put together a few setup steps and tips to help you through the process of setting up a wireless network. Tips Here are a few things to keep in mind, when you install a wireless network. Centralize your router or Access Point Make sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range. D-Link DIR-510L User Manual 128 Appendix A - Wireless Basics Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. Security Dont let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to product manual for detail information on how to set it up. There are basically two modes of networking:
Wireless Modes
Infrastructure All wireless clients will connect to an access point or wireless router.
Ad-Hoc Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer, such as two or more wireless network Cardbus adapters. An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DIR-510L User Manual 129 Appendix B - Networking Basics Networking Basics Check your IP Address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. In Windows:
Click on Start > Run. In the run box type cmd and click OK. (Windows 7/Vista users type cmd in the Start Search box.) At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-510L User Manual 130 Appendix B - Networking Basics Assign a Static IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1 Windows 7 -
Windows Vista - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Click on Start > Control Panel > Network and Internet > Network and Sharing Center. Connections. Click on Start > Control Panel > Network Connections. Windows XP -
Windows 2000 - From the desktop, right-click My Network Places > Properties. Step 2 Right-click on the Local Area Connection which represents your network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. D-Link DIR-510L User Manual 131 Appendix B - Networking Basics Example: If the routers LAN IP address is 192.168.0.1 or http://dlinkrouter.local., make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set the Default Gateway the same as the LAN IP address of your router (I.E. 192.168.0.1 or http://dlinkrouter.local.). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1 or http://dlinkrouter.local.). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DIR-510L User Manual 132 Appendix C - Technical Specifications Technical Specifications Standards
IEEE 802.11b/g/n
IEEE 802.11a/n
IEEE 802.11ac
IEEE 802.3
IEEE 802.3u
IEEE 802.3x Internet Modes
Broadband Router Mode
Mobile Router Mode
Wi-Fi Hotspot Mode Wireless Frequency Range 1
802.11b/g/n: 2.4 GHz to 2.497 GHz
802.11a/n/ac: 5.15 GHz to 5.85 GHz Security
Wi-Fi Protected Access (WPA/WPA2)
WPS 2.0 (Wi-Fi Protected Setup) Advanced Features
mydlink SharePort app for iPhone, iPad, iPod touch and Android
SharePort Mobile app for Windows 8/RT
D-Link Intelligent QoS Technology
VPN passthrough
Guest Zone Support
UPnP (DLNA) Support
SharePort Web Access Support
IPv6 Transmitter Output Power IEEE 802.11b:
17 dBm at 1, 2, 5.5, 11 Mbps IEEE 802.11g:
18 dBm at 6 to 18 Mbps
16 dBm at 24 to 36 Mbps
14 dBm at 48 to 54 Mbps IEEE 802.11n (2.4 GHz):
IEEE 802.11n (5 GHz):
IEEE 802.11ac (5 GHz):
Receiver Sensitivity1 IEEE 802.11b:
IEEE 802.11g:
D-Link DIR-510L User Manual 133 Appendix C - Technical Specifications
IEEE 802.11n HT20(MHz):
-82 dBm at MCS0, MCS8
-77 dBm at MCS2, MCS10
-70 dBm at MCS4, MCS12
-65 dBm at MCS6, MCS14 IEEE 802.11n HT40(MHz):
-79 dBm at MCS0, MCS8
-74 dBm at MCS2, MCS10
-67 dBm at MCS4, MCS12
-62 dBm at MCS6, MCS14
-79 dBm at MCS1, MCS9
-74 dBm at MCS3, MCS11
-66 dBm at MCS5, MCS13
-64 dBm at MCS7, MCS15
-76 dBm at MCS1, MCS9
-71 dBm at MCS3, MCS11
-63 dBm at MCS5, MCS13
-61 dBm at MCS7, MCS15 USB Interface
USB 2.0 Type A
Micro USB-B Embedded Battery
4000 mAh (Li-ion) power capacity1
OCP, OVP, OTP, SCP protection Electrical
Power Input: Max 1800 mA (standard adapter); 1000 mA (USB 2.0 port)
Max Operating Voltage: 5 V
Max Power Consumption: 14 W
USB 1 A Output: Max 1000 mA
USB 0.5 A Output: Max 500 mA Operating Temperature
0 to 40 C (32 to 104 F) Storage Temperature
-20 to 65 C (-4 to 149 F) Operating Humidity
10% to 90% non-condensing Storage Humidity
5% to 95% non-condensing Certifications
FCC/CE/cUL Dimensions
140 x 59 x 16 mm (5.51 x 2.32 x 0.63 inches) Weight
154 g (0.34 lbs) mydlink SharePort App Supported File Formats for iPhone, iPad, iPod touch, and Android Video:
.mp4, .mov, .m4v
.mp3, .wav, .m4a Music:
Image:
.jpg, .bmp, .png Document:
Microsoft Office formats, .pdf 1 Actual usable capacity may vary depending on charging conditions. D-Link DIR-510L User Manual 134 Appendix D - GPL Code Statement GPL Code Statement This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (GPL) or GNU Lesser General Public License (LGPL). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at:
http://tsd.dlink.com.tw/GPL.asp The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL. WRITTEN OFFER FOR GPL AND LGPL SOURCE CODE Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL and LGPL. Please direct all inquiries to:
Email: GPLCODE@DLink.com Snail Mail:
Attn: GPLSOURCE REQUEST D-Link Systems, Inc. 17595 Mt. Herrmann Street Fountain Valley, CA 92708 GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. D-Link DIR-510L User Manual 135 Appendix D - GPL Code Statement Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things. To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others. For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it. For the developers and authors protection, the GPL clearly explains that there is no warranty for this free software. For both users and authors sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users. D-Link DIR-510L User Manual 136 Appendix D - GPL Code Statement Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS 0. Definitions. This License refers to version 3 of the GNU General Public License. Copyright also means copyright-like laws that apply to other kinds of works, such as semiconductor masks. The Program refers to any copyrightable work licensed under this License. Each licensee is addressed as you. Licensees and recipients may be individuals or organizations. To modify a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a modified version of the earlier work or a work based on the earlier work. A covered work means either the unmodified Program or a work based on the Program. To propagate a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well. To convey a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying. An interactive user interface displays Appropriate Legal Notices to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work
(except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion. D-Link DIR-510L User Manual 137 Appendix D - GPL Code Statement 1. Source Code. The source code for a work means the preferred form of the work for making modifications to it. Object code means any non-source form of a work. A Standard Interface means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. The System Libraries of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form. A Major Component, in this context, means a major essential component (kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it. The Corresponding Source for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the works System Libraries, or general-purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work. For example, Corresponding Source includes interface definition files associated with source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between those subprograms and other parts of the work. The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source. The Corresponding Source for a work in source code form is that same work. D-Link DIR-510L User Manual 138 Appendix D - GPL Code Statement 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law. You may make, run and propagate covered works that you do not convey, without conditions so long as your license oth-
erwise remains in force. You may convey covered works to others for the sole purpose of having them make modifications exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you. Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed;
section 10 makes it unnecessary. 3. Protecting Users Legal Rights From Anti-Circumvention Law. No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures. When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the works users, your or third parties legal rights to forbid circumvention of technological measures. D-Link DIR-510L User Manual 139 Appendix D - GPL Code Statement 4. Conveying Verbatim Copies. You may convey verbatim copies of the Programs source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program. You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee. 5. Conveying Modified Source Versions. You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions:
a) The work must carry prominent notices stating that you modified it, and giving a relevant date. b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to keep intact all notices. c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it. d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so. A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an aggregate if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilations users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate. D-Link DIR-510L User Manual 140 Appendix D - GPL Code Statement 6. Conveying Non-Source Forms. You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, in one of these ways:
a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange. b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge. c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer, in accord with subsection 6b. d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements. e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work. D-Link DIR-510L User Manual 141 Appendix D - GPL Code Statement A User Product is either (1) a consumer product, which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, normally used refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-consumer uses, unless such uses represent the only significant mode of use of the product. Installation Information for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made. If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product (for example, the work has been installed in ROM). The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network. Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying. D-Link DIR-510L User Manual 142 Appendix D - GPL Code Statement 7. Additional Terms. Additional permissions are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions. When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work). You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission. Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms:
a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as different from the original version; or d) Limiting the use for publicity purposes of names of licensors or authors of the material; or e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors. D-Link DIR-510L User Manual 143 Appendix D - GPL Code Statement All other non-permissive additional terms are considered further restrictions within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying. If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of the additional terms that apply to those files, or a notice indicating where to find the applicable terms. Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way. 8. Termination. You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11). However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation. Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice. Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights D-Link DIR-510L User Manual 144 Appendix D - GPL Code Statement from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10. 9. Acceptance Not Required for Having Copies. You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so. 10. Automatic Licensing of Downstream Recipients. Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. An entity transaction is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the partys predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. D-Link DIR-510L User Manual 145 Appendix D - GPL Code Statement 11. Patents. A contributor is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributors contributor version. A contributors essential patent claims are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modification of the contributor version. For purposes of this definition, control includes the right to grant patent sublicenses in a manner consistent with the requirements of this License. Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributors essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. In the following three paragraphs, a patent license is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To grant such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party. If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent license to downstream recipients. Knowingly relying means you have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipients use of the covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are valid. If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it. D-Link DIR-510L User Manual 146 Appendix D - GPL Code Statement A patent license is discriminatory if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or that patent license was granted, prior to 28 March 2007. Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law. 12. No Surrender of Others Freedom. If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program. 13. Use with the GNU Affero General Public License. Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such. D-Link DIR-510L User Manual 147 Appendix D - GPL Code Statement 14. Revised Versions of this License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the GNU General Public License or any later version applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation. If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxys public statement of acceptance of a version permanently authorizes you to choose that version for the Program. Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version. 15. Disclaimer of Warranty. THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. Limitation of Liability. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. D-Link DIR-510L User Manual 148 Appendix D - GPL Code Statement 17. Interpretation of Sections 15 and 16. If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. D-Link DIR-510L User Manual 149 Appendix E - Safety Statements Safety Statements CE Mark Warning:
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the Instructions , may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution:
1. This device complies with Part 15 of the FCC rules/Industry Canada RSS 210 standard . Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 3. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. IMPORTANT NOTE : (For Mobile Device Configuration) FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and D-Link DIR-510L User Manual 150 Appendix E - Safety Statements operated with minimum distance 20 cm between the radiator & your body. IMPORTANT NOTE : (For Portable Device Configuration) Federal Communication Commission (FCC) Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C. SAR has been evaluated at 10 mm. This Class [*] digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe [*] est conforme la norme NMB-003 du Canada. Industry Canada Caution:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
(1) il ne doit pas produire de brouillage et
(2) l utilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fomctionnement du dispositif. IC IMPORTANT NOTE : (For Mobile Device Configuration) IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. IC IMPORTANT NOTE : (For Portable Device Configuration) IC Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528. This equipment should be installed and operated with minimum distance 1 cm between the radiator & your body. SAR has been evaluated at 10 mm. D-Link DIR-510L User Manual 151 Appendix E - Safety Statements Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. En vertu de la rglementation de lindustrie du Canada, cet metteur de radio ne peuvent fonctionner en utilisant une antenne dun type et maximum (ou moins) Gain approuv pour lmetteur par Industrie Canada. Pour rduire risque dinterfrence aux autres utilisateurs, le type dantenne et son gain doivent tre choisis de sorte que la puissance isotrope rayonne quivalente (PIRE) ne dpasse pas ce qui est ncessaire pour la russite de communication.
D-Link DIR-510L User Manual 152
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2013-12-20 | 5745 ~ 5825 | DTS - Digital Transmission System | Original Equipment |
2 | 5180 ~ 5240 | NII - Unlicensed National Information Infrastructure TX |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2013-12-20
|
||||
1 2 | Applicant's complete, legal business name |
D-Link Corporation
|
||||
1 2 | FCC Registration Number (FRN) |
0007371172
|
||||
1 2 | Physical Address |
17595 Mt. Herrmann
|
||||
1 2 |
Fountain Valley, California 92708
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@telefication.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
KA2
|
||||
1 2 | Equipment Product Code |
IR510LA1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
B******** A******
|
||||
1 2 | Title |
General Counsel
|
||||
1 2 | Telephone Number |
714-8********
|
||||
1 2 | Fax Number |
866-7********
|
||||
1 2 |
b******@dlink.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Compliance Certification Services Inc. Tainan Lab.
|
||||
1 2 | Name |
D******** L********
|
||||
1 2 | Physical Address |
Taiwan
|
||||
1 2 | Telephone Number |
886-6********
|
||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
Compliance Certification Services Inc. Tainan Lab.
|
||||
1 2 | Name |
D**** L******
|
||||
1 2 | Physical Address |
Taiwan
|
||||
1 2 | Telephone Number |
886-6********
|
||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | AC750 Portable Router and Charger | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power output listed is conducted. This is a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating configurations as tested for this filling. SAR has been evaluated at 10 mm (hotspot). End-users must be informed regarding RF exposure compliance. The highest reported SAR value is 1.27 W/kg (Body). This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5775 MHz. | ||||
1 2 | Power output listed is conducted. This is a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating configurations as tested for this filling. SAR has been evaluated at 10 mm (hotspot). End-users must be informed regarding RF exposure compliance. The highest reported SAR value is 1.16 W/kg (Body). This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz. Operations in 5150-5250 MHz band is for indoor use only. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Compliance Certification Services Inc.
|
||||
1 2 | Name |
K******** C****
|
||||
1 2 | Telephone Number |
886-3******** Extension:
|
||||
1 2 | Fax Number |
886-3********
|
||||
1 2 |
k******@ccsrf.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC MO | 2412 | 2462 | 0.4 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15C | CC MO | 5745 | 5825 | 0.07 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | CC | 5180.00000000 | 5240.00000000 | 0.0280000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC