all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Users Manual | Users Manual | 1.98 MiB | December 23 2020 / June 22 2021 | delayed release | ||
1 2 |
|
Internal photos | Internal Photos | 2.18 MiB | December 23 2020 / June 22 2021 | delayed release | ||
1 2 |
|
External photos | External Photos | 377.48 KiB | December 23 2020 / June 22 2021 | delayed release | ||
1 2 |
|
Label Sample and Label Location rev | ID Label/Location Info | 563.29 KiB | December 23 2020 | |||
1 2 |
|
Agent authorization | Cover Letter(s) | 22.48 KiB | December 23 2020 | |||
1 2 | Block diagram | Block Diagram | December 23 2020 | confidential | ||||
1 2 |
|
Confidentiality request (Long term) | Cover Letter(s) | 23.34 KiB | December 23 2020 | |||
1 2 |
|
Confidentiality request (Short term) | Cover Letter(s) | 18.25 KiB | December 23 2020 | |||
1 2 |
|
Contact Authorization | Cover Letter(s) | 45.25 KiB | December 23 2020 | |||
1 2 | Operational Description rev | Operational Description | December 23 2020 | confidential | ||||
1 2 |
|
RF Exposure Info (MPE) | RF Exposure Info | 284.68 KiB | December 23 2020 | |||
1 2 | Schematics | Schematics | December 23 2020 | confidential | ||||
1 2 | Software Operational Description | Operational Description | December 23 2020 | confidential | ||||
1 2 |
|
Test Report (NII) rev | Test Report | 2.64 MiB | December 23 2020 | |||
1 2 |
|
Test report (co-located) rev | Test Report | 1.00 MiB | December 23 2020 | |||
1 2 |
|
Test setup photos | Test Setup Photos | 735.98 KiB | December 23 2020 / June 22 2021 | delayed release | ||
1 2 |
|
Attestation (Channel and Mode Declaration) | Attestation Statements | 14.92 KiB | December 23 2020 | |||
1 2 |
|
Test Report (DTS-WLAN) rev | Test Report | 2.49 MiB | December 23 2020 |
1 2 | Users Manual | Users Manual | 1.98 MiB | December 23 2020 / June 22 2021 | delayed release |
Version 1.00 | 2020/12/21 User Manual AX1800 Mesh Wi-Fi 6 Range Extender DAP-X1860 D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Preface Manual Revisions Hardware Revision Date Description A1 v1.00 21 December, 2020 Initial release Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Apple, Apple logo, Safari, iPhone, and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries. App StoreSM is a service mark of Apple Inc. Chrome browser, Google Play and Android are trademarks of Google Inc. Internet Explorer, Windows and the Windows logo are trademarks of the Microsoft group of companies. Copyright 2021 by D-Link Corporation. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation. D-Link DAP-X1860 User Manual i Table of Contents Preface ................................................................................. i Product Overview .............................................................. 1 Package Contents ......................................................................... 1 System Requirements ................................................................. 2 Introduction ................................................................................... 3 Features .................................................................................... 3 What is a Wireless Extender? ............................................ 4 Hardware Overview ..................................................................... 5 Front .......................................................................................... 5 Status/WPS LED Indicator .................................................. 6 Left Side.................................................................................... 7 Back............................................................................................ 8 Installation ......................................................................... 9 Wireless Installation Considerations ...................................... 9 Hardware Setup ..........................................................................10 Getting Started ................................................................11 WPS-PBC Configuration ...........................................................12 Assessing Uplink Signal Strength .........................................13 D-Link Wi-Fi App Setup .....................................................14 Wireless Setup Wizard ...............................................................16 Access Point Mode Settings ....................................................23 Configuration ...................................................................24 Home ..............................................................................................24 Home - Connected to a Wi-Fi Mesh Router .......................27 Settings ..........................................................................................28 Extender Settings ...............................................................28 Existing Network ............................................................29 Smart Connect ................................................................30 Network Settings ................................................................32 Management ................................................................................34 Time .........................................................................................34 Schedule ................................................................................35 Admin .....................................................................................36 System ....................................................................................37 Upgrade .................................................................................38 Statistics .................................................................................39 Wi-Fi Mesh Setup .............................................................40 Setup Using the D-Link Wi-Fi App ........................................41 Setup Using an Ethernet Cable .............................................42 Connecting Wireless Clients to the Extender ................43 WPS Button ...................................................................................43 Windows 10 ................................................................................44 Windows 8 - WPA/WPA2 .........................................................45 Troubleshooting ..............................................................47 Wireless Basics .................................................................49 Tips ...................................................................................................50 Technical Specifications ..................................................51 GPL Code Statement........................................................52 Regulatory Statements ...................................................67 D-Link DAP-X1860 User Manual ii Table of Contents Product Overview Package Contents DAP-X1860 AX1800 Mesh Wi-Fi 6 Range Extender QIC Quick Install Card Simple Setup Guide If any of the above items are missing, please contact your reseller. D-Link DAP-X1860 User Manual 1 Section 1 - Product Overview System Requirements Network Requirements A wireless router with an active Internet connection. IEEE 802.11ac, 802.11n, 802.11g, 802.11b, or 802.11a wireless clients/devices Web-based Configuration Utility Requirements A Computer or Mobile Device with the following:
Windows, Apple Mac OS, or Linux-based operating system Wireless adapter or Wi-Fi functionality An Apple iPhone, iPad, or Android device Browser Requirements:
Internet Explorer 10 or later Firefox 28 or later Safari 6.0 or later Google Chrome 28 or later D-Link Wi-Fi App Requirements iOS or Android device (Please refer to the apps store page to check whether your device is compatible.) D-Link DAP-X1860 User Manual 2 Section 1 - Product Overview Introduction Features High-speed Wireless Performance With Wireless 802.11ac Technology Thanks to the latest wireless AC technology, the DAP-X1860 provides a wireless connection at up to 2000 Mbps* with other 802.11ac wireless devices. This feature lets you participate in real-time activities online, such as video streaming, online gaming, and real-time audio with smooth performance. Compatibility The DAP-X1860 is fully compatible with the latest 802.11ac standard, but is also backwards compatible with IEEE 802.11n/g/b/a wireless devices, so you can use your existing devices without sacrificing performance. Compact, Convenient Design The DAP-X1860 is a compact device that is ideal for use at home or a small office, as it does not take up much space and is ready to use by simply plugging it in. The bright Signal Indicator LED makes finding a suitable location a cinch. Its diminutive wall-plug design easily saves you the hassle of dealing with a power cord. Latest Wireless Network Security and Encryption The DAP-X1860 supports wireless security features to prevent unauthorized access from the wireless network. Support for WPA/WPA2 standards ensure that youll be able to use the best possible encryption methods with your compatible wireless devices. Extend and Customize Your High-speed Wireless AC Network with Wi-Fi Mesh D-Links Wi-Fi Mesh is a scalable solution that allows you to easily increase the coverage of your wireless AC network when connected to a D-Link Wi-Fi Mesh router. Setup is effortless; configuration of multiple DAP-X1860s can be done in minutes as settings can be passed on to other access points once the first is configured. Easy to Set Up, Easy to Use Setting up the AX1800 Mesh Wi-Fi 6 Range Extender is simple. You can use the supported D-Link Wi-Fi app on your compatible iOS or Android device to utilize the built in set up wizard. The DAP-X1860 can also receive automatic over-the-air firmware updates, which ensures the best protection and the latest features for your device.
* Maximum wireless signal rate derived from standard IEEE specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead may lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link DAP-X1860 User Manual 3 Section 1 - Product Overview What is a Wireless Extender?
The DAP-X1860 acts as a repeater to extend the range of an existing wireless network to provide a better signal for parts of your home or office that may have poor or no reception. Your existing wireless signal will be re-broadcast by the DAP-X1860, allowing you to reach the farthest corners of your home or office. The extended network can simply use the same network credentials as the existing network, or you can specify a different network name and password, giving you the flexibility to control network access. You may also use the DAP-X1860 as a wireless access point by connecting an Ethernet cable. Extend Your Wireless Network using Wi-Fi Internet Router DAP-X1860 Wireless Devices Extend Your Wireless Network using Ethernet Internet Router DAP-X1860 Wireless Devices D-Link DAP-X1860 User Manual 4 Section 1 - Product Overview Hardware Overview Front 2 1 1 2 Status LED This LED indicates the current status of the DAP-X1860, as detailed on the next page Signal Indicator LED The more lit green bars on the Signal Indicator LED, the better the wireless signal to the host network. A single solid orange LED indicates a weak Wi-Fi signal. D-Link DAP-X1860 User Manual 5 Section 1 - Product Overview Status/WPS LED Indicator Status/WPS LED Indicator LED Indicator Color Status Solid Green The DAP-X1860 is receiving power and connected to a host network. Blinking WPS mode is active and is searching for another WPS device. Description Power/Status Red Solid The DAP-X1860 is booting or an error has occurred. Orange Blinking The DAP-X1860 is not connected to a host network. None Off Device is not receiving power. Check the power outlet. D-Link DAP-X1860 User Manual 6 Section 1 - Product Overview Left Side 1 2 3 1 Reset Button Use an unfolded paperclip to press and hold the reset button on the bottom of DAP-X1860 for 10 seconds to restore to factory default settings. 2 WPS Button Press to establish a connection with another WPS compatible device. 3 LAN Connect an Ethernet cable if you are adding wireless to wired network. D-Link DAP-X1860 User Manual 7 Section 1 - Product Overview Back You may locate the Wi-Fi name (SSID) and password for your DAP-X1860. This information is printed on the specification sticker on the back of the device. You will need this information to connect your computer or mobile device to the default network (SSID) of your DAP-X1860. This information is also provided on the Quick Install Card. D-Link DAP-X1860 User Manual 8 Section 2 - Installation Installation Wireless Installation Considerations The DAP-X1860 lets you extend your existing wireless networks coverage as long as it is within range of the uplink network. Keep in mind that the DAP-X1860s extension networks range may be limited by the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link extender and other network devices to a minimum - each wall or ceiling can reduce your adapters range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. 2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (0.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick!
Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3. Building materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position extenders, access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal. 4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise. 5. If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone is not in use. D-Link DAP-X1860 User Manual 9 Section 2 - Installation Hardware Setup Plug in the DAP-X1860 to a power outlet. Verify that the power LED is blinking orange before continuing with configuration. OUTLET D-Link DAP-X1860 User Manual 10 Section 2 - Installation Getting Started There are several configuration tools you can use to set up your DAP-X1860. WPS PBC - To easily extend an existing wireless network refer to WPS-PBC Configuration on page 12 for setup instructions. D-Link Wi-Fi App - Use your compatible iOS or Android device to configure your extender. Refer to D-Link Wi-Fi on page 14 on page 11 for setup instructions. Web-based Wireless Setup Wizard - This wizard will launch when you log into the extenders web configuration utility for the first time. Refer to Wireless Setup Wizard on page 16 for setup instructions. Access Point Mode Settings- This section will go through how to setup your extender as an access point. Refer to Access Point Mode Settings on page 23. D-Link DAP-X1860 User Manual 11 Section 3 - Configuration WPS-PBC Configuration Wireless Protected Setup (WPS) makes connecting your DAP-X1860 easy. To use WPS, first make sure the source router or access point features a WPS Button or has a virtual WPS Button. Step 1 - Initiate WPS Mode While the Status/WPS LED is blinking orange, push the WPS button on the source wireless router or AP, and then push the WPS button on the DAP-X1860. The Status/WPS LED will start to flash green. Please allow up to two minutes for the process to finish. The Status/WPS LED will turn solid green when the DAP-X1860 has connected successfully to the source wireless router or access point. Step 2 - Connecting Devices to the DAP-X1860 The DAP-X1860 is now ready to share the extended Wi-Fi network with your PCs and mobile devices. You may use the WPS method to connect devices to the extended network created by the DAP-X1860 using the following network names
(SSID). The password will be the same as the wireless network you are extending.
(Your routers SSID)-EXT The Smart Connect feature will present a single wireless network. When connecting clients to the extended network, they will be automatically added to the best band, either 2.4 GHz or 5 GHz. To disable the Smart Connect feature and individually configure 2.4 GHz and 5 GHz SSIDs, refer to Extender Settings on page 28. D-Link DAP-X1860 User Manual 12 Section 3 - Configuration Assessing Uplink Signal Strength The Status/WPS LED will turn solid green when the DAP-X1860 has connected successfully to a wireless network and is extending that network. If the Smart Signal LED has a single orange bar after the connection process has finished, the DAP-X1860 has established a poor quality connection. The more lit bars on the Signal Indicator LED, the better the wireless signal. To improve the connection quality, the DAP-X1860 should be relocated closer to the source wireless router. Using the 5 GHz extension network is recommended in order to achieve the fastest wireless speeds. If the extender has been configured as an Access Point and is connected via Ethernet cable to an uplink network, the Smart Signal LED will not be lit. Poor Ok Good Best D-Link DAP-X1860 User Manual 13 Section 2 - Installation D-Link Wi-Fi App Setup The D-Link Wi-Fi app allows you to install and configure your DAP-X1860 from your compatible Android or iOS device. Note: The screenshots may be different depending on your mobile devices OS version. The following steps show the iOS interface of the D-Link Wi-Fi app. If you are using an Android device, the appearance may be different from that of the screenshots, but the process is the same. Step 1 Search and install the free D-Link Wi-Fi app available on the App Store or on Google Play. You can also scan the QR code on the right, which will take you to the respective D-Link Wi-Fi app store page. Step 2 Launch the D-Link Wi-Fi app from the home screen of your device. Step 3 Tap on the Install New Device button at the middle of the screen. D-Link Wi-Fi D-Link DAP-X1860 User Manual 14 Section 2 - Installation Step 4 Click Yes if you have the setup QR code with you to scan the QR code and proceed to step 6. If not, click No and proceed to step 5. Step 5 Slide the product options to AP and select DAP-X1860 from the list of available devices. Click Next to continue. Step 6 You will now be guided through a step-by-step process for setting up your device. Simply follow the on-screen instructions to complete the installation and DAP-X1860 configuration process. D-Link DAP-X1860 User Manual 15 Section 3 - Configuration Wireless Setup Wizard The setup wizard is designed to guide you through a step-by-step process to configure your new DAP-X1860 AX1800 Mesh Wi-Fi 6 Range Extender to extend your wireless network and connect to the Internet via a wireless setup process. To set your DAP-X1860 using an Ethernet cable, please refer to Access Point Mode Settings on page 23. To access the setup utility for the DAP-X1860 AX1800 Mesh Wi-Fi 6 Range Extender on your PC, first connect to the DAP-X1860 wirelessly using the Wi-Fi name (SSID) and password located on the back of your DAP-X1860. Then open a web browser and enter http://dlinkap.local./ in your browsers URL field. You may also enter the IP address* of the DAP-X1860.
* The default IP address is 192.168.0.50. Once your DAP-X1860 connects to the host network, it will be assigned a new IP address based on your networks DHCP settings. You will need to log in to your router to see what IP address is assigned to your DAP-X1860. For multiple DAP-X1860s, go to http://dlinkapxxxx.local. as shown on the included Quick Installation Card, with xxxx being the last four digits of the DAP-X1860s MAC address. If this is your first time logging in to the extender and no connection has been established, the setup wizard will automatically appear. If the setup process was not previously completed, then log in to the interface by leaving the password field blank. D-Link DAP-X1860 User Manual 16 Section 3 - Configuration Agree to the Terms of Use and Privacy Policy to continue. This wizard will guide you through configuring your new DAP-X1860 by wireless means. Click Next to begin. D-Link DAP-X1860 User Manual 17 Section 3 - Configuration Please wait while your DAP-X1860 scans for available Wi-Fi networks. The DAP-X1860 will scan for available wireless networks and display a list of results. You may choose one of the following options to proceed:
If the wireless network you wish to extend was detected by the scan, click on the network to select it. The extender will automatically forward you to the next step. YourRouter If the network you would like to extend was not detected by the scan, click the Manual button. Note: If the wireless network you would like to extend was not detected by the scan, your DAP-X1860 might be out of range and you may need to reposition the extender closer to the host network device. D-Link DAP-X1860 User Manual 18 Section 3 - Configuration If the wireless network you wish to extend was detected by the scan, enter the password to your router now. Click Next to continue on to configure your extension network settings, or click Back to return to the previous step. YourRouter If you chose Manual , enter the Wireless Network Name (SSID) and Password of the existing Wi-Fi network you wish to connect to. Click Next to continue on to configure your extension network settings, or click Back to return to the previous step. D-Link DAP-X1860 User Manual 19 Section 3 - Configuration In order to secure the extenders web configuration utility, please enter an admin password. You will be prompted for this password each time you want to use the extenders web configuration utility. Click Next to continue. Select your time zone from the drop-down menu. Click Next to continue. Keeping your DAP-X1860 firmware up to date provides you with the latest protection and new features over the air. Choose whether to keep your device up to date automatically or to manage the device updates by yourself. Click Next to continue. D-Link DAP-X1860 User Manual 20 Section 3 - Configuration At the end of the wizard, you will be presented with a final summary of your settings. It is recommended that you record this information for future reference. Click Finish to close the wizard. YourRouter Your changes will be saved and the extender will reboot. Devices may be connected to the new wireless extension network(s) once the extender successfully reboots.
*Wireless network names and passwords are shown for example only. D-Link DAP-X1860 User Manual 21 Section 3 - Configuration Click OK to exit the Setup Wizard. You will be redirected to the log in page. You can now place the DAP-X1860 in a place where you require Internet access. D-Link DAP-X1860 User Manual 22 Section 3 - Configuration Access Point Mode Settings This page lets you configure the settings to use the DAP-X1860 as an access point. Connect an Ethernet cable from your routers LAN port to the LAN port at the bottom of the DAP-X1860. To access this page, click the Settings drop-down menu at the top of the page, and select Extender. Click Save to apply the settings and return to the home page. Under Existing Network, choose Ethernet to utilize the DAP-X1860 as an access point. Refer to Extender Settings on page 28 for more information regarding configuration options. D-Link DAP-X1860 User Manual 23 Section 3 - Configuration Configuration Home The home screen gives a summary of the current status of devices connected to the DAP-X1860. A green check between the device and the uplink router indicates that there is an active connection. A red cross indicates that there is no connection present, or there is a connection error. If theres no active uplink connection, click on the Click to Repair button to start the setup wizard. Note: If the DAP-X1860 is connected to a Wi-Fi Mesh supported router, then the home screen will only show the Firmware Upgrade function. Other functions for the DAP-X1860 can be configured from the routers configuration page. For more details, refer to Home - Connected to a Wi-Fi Mesh Router on page 27. Uplink Router This icon shows the status of the Internet connection to the uplink router. It is grey if the DAP-X1860 is not connected to an uplink router. Once connected, click on it to see its connection details. DAP-X1860 Click on this icon to see details of the uplink network the DAP-X1860 is connected to or connect to another uplink router. Connected Clients Click on the Connected Clients icon to see client details. D-Link DAP-X1860 User Manual 24 Section 3 - Configuration Once your Internet connection is set up, you can view the details of the IPv4 Network, the IPv6 Network and the Wi-Fi network by clicking on the DAP-X1860 icon. Upon clicking the Uplink Router icon, you will see the details of the Existing Network. This contains information regarding the Connection Type, Network Status, Connection Uptime, Wi-Fi name (SSID), and Password. D-Link DAP-X1860 User Manual 25 Section 3 - Configuration Clicking the Connected Clients icon will show you the devices that are currently connected to the DAP-X1860, the network they are connected to, and their IP addresses. To edit each clients settings, click the pencil icon on the client you want to edit. Name Enter a custom name for this client. Vendor Displays the vendor of the device. MAC Address Displays the MAC address of the device. IP Address Displays the current IP address of this client. Click Save when you are done. D-Link DAP-X1860 User Manual 26 Section 3 - Configuration Home - Connected to a Wi-Fi Mesh Router If the DAP-X1860 is connected to a Wi-Fi Mesh supported router, login to the DAP-X1860s homescreen by typing in your routers Admin Password. The DAP-X1860s home screen will only show the firmware information for the DAP-X1860. Other functions for the DAP-X1860 can be configured from the main routers configuration page. Please make sure that the Wi-Fi Mesh feature is enabled in your compatible routers wireless settings. Firmware Information The current firmware version of your DAP-X1860. Click Check for New Firmware to see if your DAP-X1860 is up to date. Upgrade Manually If you wish to upgrade manually, first download the firmware file you wish to upgrade to. Next, click the Select File button to browse to the file and click Upload to install the new firmware. D-Link DAP-X1860 User Manual 27 Section 3 - Configuration Settings Extender Settings This page lets you configure the settings for the DAP-X1860s extended wireless network. To access this page, click the Settings drop-down menu at the top of the page, and select Extender. Click Save to apply the settings and return to the home page. D-Link DAP-X1860 User Manual 28 Section 3 - Configuration Existing Network Existing Network Select the type of existing network, either Ethernet or Wi-Fi you want the DAP-X1860 to connect to. Select Ethernet if you are connecting to your network via an Ethernet cable. Select Wi-Fi if you are connecting to your network by wireless means. Wi-Fi - Existing Network If Wi-Fi is selected, the following Wi-Fi Existing Network options will appear. Wi-Fi Name (SSID) Type in the Wi-Fi Name of the network you would like to extend. Password Type in the password of the network you would like to extend. Scan If Scan is pressed, a window will pop up showing you available Wi-Fi networks. You can choose the network you would like to extend. After selecting the network option, press Select and you will be prompted to enter a password if required. Press OK to confirm your selection. D-Link DAP-X1860 User Manual 29 Section 3 - Configuration Smart Connect Smart Connect Enable or disable the Smart Connect Feature. When enabled, only a few configuration options are available to simplify configuration. Extended Wi-Fi - Smart Connect Enabled Status Enable or disable the Extended Wi-Fi wireless network. Wi-Fi Name (SSID) This is the name of the DAP-X1860s extended network. If using Wi-Fi, the DAP-X1860 will rebroadcast the uplink routers Internet connection under this SSID. You may also manually set the SSID of the extended network. Password Enter the password or network key that you wish to use for the extended Wi-Fi network. Schedule Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable or you can create your own schedules in the Schedules section. Refer to Schedule on page 35 for more information. Wireless - Smart Connect Disabled 2.4 GHz Extended Wi-Fi Status Enable or disable the 2.4 GHz network by toggling this slider. Wi-Fi Name (SSID) This is the name of the DAP-X1860s extended network. If using Wi-Fi, the DAP-X1860 will rebroadcast the uplink routers Internet connection under this SSID. You may also manually set the SSID of the extended network. Password Enter the password or network key that you wish to use for the extended 2.4 GHz network. Schedule Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable or Always. D-Link DAP-X1860 User Manual 30 Section 3 - Configuration Wireless - Smart Connect Disabled (Continued) 5 GHz Extended Wi-Fi Status Enable or disable the 5 GHz network by toggling this slider. Wi-Fi Name (SSID) This is the name of the DAP-X1860s extended network. If using Wi-Fi, the DAP-X1860 will rebroadcast the uplink routers Internet connection under this SSID. You may also manually set the SSID of the extended network. Password Enter the password or network key that you wish to use for the extended 5 GHz network. Schedule Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable or Always. D-Link DAP-X1860 User Manual 31 Section 3 - Configuration Network Settings This page lets you configure the network settings for the DAP-X1860. To access this page, click the Settings drop-down menu at the top of the page, then select Network. Click Save at any time to save the changes you have made on this page. Management Link You can change the URL name of the device by editing the text in the text box. If you change the name of the device, you will need to enter http://xxxx.local. (where xxxx corresponds to the name of the device) in the address bar of your web browser in order to access the configuration utility. Advanced Settings The Advanced Settings section of the Network Settings page allows you to configure both IPv4 and IPv6 settings that will be used by the DAP-X1860s extended network. IPv4 My LAN Connection is Here you can select whether you want the IP to have a Dynamic IP or Static IP address. If you select Dynamic IP, the options below will not be available. IP Address Enter the Static IP address that you want to assign to the extended network AP. This address should be outside of the uplink routers DHCP address pool. Subnet Mask Enter the subnet mask. Gateway Address Enter the gateway address. This is usually the IP address of the uplink router. Primary DNS Server Enter the address of the primary DNS server. Secondary DNS Server Enter the address of the secondary DNS server. This is optional but will provide backup if the primary server fails. D-Link DAP-X1860 User Manual 32 Section 3 - Configuration IPv6 - Autoconfiguration (SLAAC/DHCPv6) My Internet Connection is Select Autoconfiguration (SLAAC/DHCPv6) to have the DAP-X1860 automatically receive an IPv6 address from the uplink router. Obtain a DNS server address automatically You can select to obtain IPv6 DNS server information automatically, or you can select to configure DNS servers manually by selecting next to the option Use the following DNS address. Primary DNS Server For manual settings, enter the primary IPv6 DNS server address. Secondary DNS Server For manual settings, enter the secondary IPv6 DNS server address. This is optional but will provide backup if the primary server fails. IPv6 - Static IPv6 My Internet Connection is Select Static IPv6 to manually assign an IP address to the DAP-X1860. IPv6 Address Enter the IPv6 address that you want to assign to the extended network AP. This address should be outside of the uplink routers DHCP address pool. Subnet Prefix Length Enter the length of the IPv6 subnet prefix. Default Gateway Enter the default gateway. Primary DNS Server Enter the primary IPv6 DNS server address. Secondary DNS Server Enter the secondary IPv6 DNS server address. This is optional but will provide backup if the primary server fails. IPv6 - Local Connectivity Only My Internet Connection is Select Local Connectivity Only to set an IPv6 address only for the local network. LAN IPv6 Link-Local Address The link-local address of the DAP-X1860. D-Link DAP-X1860 User Manual 33 Section 3 - Configuration Management Time The Time page allows you to configure, update, and maintain the correct time on the internal system clock. From here you can set the time zone and the Network Time Protocol (NTP) server. In the Management menu on the bar on the top of the page, click Time & Schedule. Click Save at any time to save the changes you have made on this page. Time Configuration Time Zone Select your time zone from the drop-down menu. Time Displays the current date and time of the router. Automatic Time Configuration NTP Server Select from the drop-down menu to either use the D-Link NTP Server to synchronize the time and date for your router, or choose Manual to set the NTP servers IP address. D-Link DAP-X1860 User Manual 34 Section 3 - Configuration Schedule Some router functions can be controlled through a pre-configured schedule. To create, edit, or delete schedules, from the Time page click Schedule. To return to the Time page, click Time. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add a Schedule button. Click Save when you are done. If you edit or create a rule, the following screen will appear:
First, enter the name of your schedule in the Name field. Each box represents one hour, with the time at the top of each column. To add a time period to the schedule, simply click on the starting hour and drag to the ending hour. You can add multiple days to the schedule, but only one period per day. To remove a time period from the schedule, click on the cross icon. Click Apply when you are done. D-Link DAP-X1860 User Manual 35 The above shows an example of a schedule. Section 3 - Configuration Admin This page will allow you to set a new password for the administrator account used to configure the DAP-X1860. To access this page, click the Management drop down menu at the top of the page, and select Admin. Click Save at any time to save the changes you have made on this page. Password Enter the Admin password. Status LED Turn on or off to configure the LED status lights. D-Link DAP-X1860 User Manual 36 Section 3 - Configuration This page allows you to save or restore your system configuration, reset, or reboot the DAP-X1860. To access this page, click the Management drop down menu at the top of the page, and select System. System Save Settings To Local Hard Drive Save the system settings onto a file to the local hard drive. You will then see a file dialog where you can select a location and enter a file name for the configuration file. Load Settings From Local Hard Drive Load the system settings from a previously saved file on the local hard drive. Click the Restore button that appears after loading the system settings file to load the settings. Restore to Factory Default Settings Restore the system settings to factory default settings. This will erase all currently stored settings. Reboot the Device Click Reboot to reboot the DAP-X1860. D-Link DAP-X1860 User Manual 37 Section 3 - Configuration Upgrade Firmware upgrades may be provided for the DAP-X1860 in the future. This page will allow you to upgrade the routers firmware, either automatically or manually. To manually upgrade the firmware, you must first download the relevant file from http://support. dlink.com. To access this page, click the Management drop down menu at the top of the page, and select Upgrade. Click Save at any time to save the changes you have made on this page. Current Firmware Version Check for New Firmware Firmware The current firmware's version will be displayed. Click this button to prompt the router to automatically check for a new firmware version. If a newer version is found, it will prompt you to install it. Automatic Firmware Upgrade Automatic Upgrade If enabled, the router will automatically check for and upgrade to the newest firmware. Choose Upgrade Time You may set the DAP-X1860 to automatically upgrade its firmware at a set time by enabling the function. Set the hour and minute to automatically upgrade by using the drop-down menus. Upgrade Manually Upgrade Firmware If you wish to upgrade manually, first download the firmware file you wish to upgrade to. Next, click the Select File button to browse to the file and click Upload to install the new firmware. D-Link DAP-X1860 User Manual 38 Section 3 - Configuration Statistics This page displays details about your wireless and network connections. To access this page, click the Management drop-down menu at the top of the page, and select Statistics. Click Clear to reset the statistics. On the Statistics page you can view the amount of packets that pass through the router on the WAN, LAN, and wireless segments. You can view the LAN, Wi-Fi, 2.4 GHz Extended Wi-Fi, or 5 GHz Extended Wi-Fi by clicking on the respective tabs at the top. The graph will update in real time. To clear the information on the graph, click Clear. The traffic counter will reset if the device is rebooted. D-Link DAP-X1860 User Manual 39 Section 3 - Configuration Wi-Fi Mesh Setup D-Links Wi-Fi Mesh is a scalable solution that allows you to easily increase the coverage of your home or office wireless AC network. Expand your Wi-Fi coverage by adding compatible D-Link access points. Mix and match suitable D-Link devices according to your budget and preferences to fit any floorplan. Setup is effortless; configuration of multiple access points can be done in minutes as settings can be passed on to other access points once the first access point is configured. Wi-Fi Mesh intelligently finds the shortest/fastest path to your router. So even if you have eight mesh nodes, you can count on Wi-Fi Mesh to push your 4K streaming movies and intense VR games to your device at lightning speeds. Wi-Fi Mesh can also automatically detect malfunctioning nodes and reroute the connection to your working mesh devices. Once the mesh network has been established, you can refer to your Wi-Fi Mesh routers configuration settings to see your mesh topology report. The DAP-X1860s home screen will show the firmware information for the DAP-X1860. Functions for the DAP-X1860 can be configured from the main routers configuration page. Refer to Home - Connected to a Wi-Fi Mesh Router on page 27 for more information. D-Link DAP-X1860 User Manual 40 Section 4 - Wi-Fi Mesh Setup Setup Using the D-Link Wi-Fi App To set up your Wi-Fi Mesh network using the D-Link Wi-Fi app, first refer to D-Link Wi-Fi App Setup on page 14. When the app leads you to the setup wizard of the device, you can choose to either Extend your home network by amplifying your routers wireless signal OR Extend your home network by using a wired connection to your router. To utilize your DAP-X1860 with Wi-Fi Mesh, select Wirelessly as the setup option and follow the apps instructions to complete the setup. D-Link DAP-X1860 User Manual 41 Section 4 - Wi-Fi Mesh Setup Setup Using an Ethernet Cable Step 1 Connect and plug in the DAP-X1860 close to your Wi-Fi Mesh router and wait for the LED light to blink orange.
< 1 m Step 2 Use the Ethernet cable to connect the DAP-X1860 to one of the LAN ports on the Wi-Fi Mesh router. The pairing process may take a few minutes. The status and the signal indicator LEDs on the DAP-X1860 will turn solid green once it has finished pairing with your Wi-Fi Mesh router. Step 3 Disconnect the Ethernet cable and place the Wi-Fi Mesh compatible device anywhere in your home to extend your home Wi-Fi. D-Link DAP-X1860 User Manual 42 Section 4 - Wi-Fi Mesh Setup Connecting Wireless Clients to the Extender WPS Button Once an uplink network has been established, you may use the DAP-X1860s WPS function to add additional wireless clients to your extenders network. Many wireless devices such as wireless routers, media players, printers, and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DAP-X1860. Please refer to the user manual for the wireless device you want to connect to make sure you understand how to enable WPS. Once you are certain, follow the steps below:
Step 1 - Press the WPS button on the DAP-X1860 for about 1 second. The LED on the device will start to blink. Step 2 - Within 120 seconds, press the WPS button on your wireless device. Step 3 - Allow up to 1 minute to configure. Once the LED light stops blinking and turns solid green, you will be connected and your wireless connection will be secured with WPA2. D-Link DAP-X1860 User Manual 43 Section 5 - Connecting a Wireless Client To join an existing network, locate the wireless network icon in the taskbar, next to the time display and click on it. Windows 10 Clicking on this icon will display a list of wireless networks which are within range of your computer. Select the desired network by clicking on the SSID. Wireless Icon To connect to the SSID, click Connect. To automatically connect with the router when your device next detects the SSID, check the Connect Automatically check box. You will then be prompted to enter the Wi-Fi password (network security key) for the wireless network. Enter the password into the box and click Next to connect to the network. Your computer will now automatically connect to this wireless network when it is detected. D-Link DAP-X1860 User Manual 44 Section 5 - Connecting a Wireless Client Windows 8 - WPA/WPA2 To join an existing network, locate the wireless network icon in the taskbar, next to the time display. Clicking on this icon will display a list of wireless networks which are within connecting proximity of your computer. Select the extenders network by clicking on the network name. You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router at this point to enable the WPS function. Wireless Icon dlink dlink D-Link DAP-X1860 User Manual 45 Section 5 - Connecting a Wireless Client When you have established a successful connection with a wireless network, the word Connected will appear next to the name of the network to which you are connected. dlink D-Link DAP-X1860 User Manual 46 Section 5 - Connecting a Wireless Client Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DAP-X1860. Read the following descriptions if you are having problems. 1. Why cant I access the web-based configuration utility?
When entering the IP address of the AX1800 Mesh Wi-Fi 6 Range Extender (dlinkap.local./), you are not connecting to a website nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. Make sure you have an updated Java-enabled web browser. We recommend the following:
Internet Explorer 10 or later Firefox 28 or later Safari 6.0 or later Google Chrome 28 or later Make sure that you are connected to the same wireless network which is listed on the base of the DAP-X1860. If you have an active wired LAN Ethernet connection, try temporarily unplugging the Ethernet cable from the computer you are using, as this may eliminate possible conflicts from having two simultaneous connections on the same computer. Disable any Internet security software running on the computer. Software firewalls such as ZoneAlarm, BlackICE, Sygate, Norton Personal Firewall, and Windows XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DAP-X1860 User Manual 47 Section 6 - Troubleshooting Configure your Internet settings:
Go to the Control Panel. Search for Internet Options. From the Security tab, click the button to restore the settings to their defaults. Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times. Close your web browser (if open) and open it. Access the web management interface. Open your web browser and enter the address of your extender
(http://dlinkap.local) in the address bar. This should open the login page for your web management. If the DAP-X1860 is not connected to an uplink router, you can try accessing the web interface using the default IP address http://192.168.0.50. If you still cannot access the configuration, unplug the extender from the power outlet for at least 10 seconds and plug it back in. Wait about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer. 2. What can I do if I forgot my password?
If you forgot your password, you must reset your extender. Unfortunately this process will change all your settings back to the factory defaults. To reset the extender, locate the reset button (hole) on the underside panel of the unit. With the extender powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the extender will go through its reboot process
(indicated by the LED turning red). Wait about 30 seconds to access the extender. The default IP address is http://dlinkap.local. When logging in, the username is admin and leave the password box empty. D-Link DAP-X1860 User Manual 48 Section 6 - Troubleshooting Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely and conveniently access your network. You will be able to enjoy the freedom that wireless networking delivers. A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapters used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide this link. D-Link DAP-X1860 User Manual 49 Appendix A - Wireless Basics Tips Here are a few things to keep in mind when you are installing your AX1800 Mesh Wi-Fi 6 Range Extender. Centralize the extenders location For best performance, make sure you place the extender in a centralized location within your desired usage area. Try to place the extender so that there are minimal obstructions between it and the uplink router. If possible, use an elevated power outlet, so the signal can be dispersed more easily. If you have a large home or usage area, you may need several extenders in order to achieve optimal coverage. Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the extender. This can significantly reduce any interference that the appliances might cause since they operate on same frequency. Security Dont let your neighbors or intruders connect to your wireless network. Secure your wireless network by utilizing the WPA or WEP security feature on the extender and uplink router. Refer to the relevant sections of this manual for further details. D-Link DAP-X1860 User Manual 50 Appendix A - Wireless Basics Technical Specifications Standards IEEE 802.11ac IEEE 802.11a IEEE 802.11n IEEE 802.11g IEEE 802.11b IEEE 802.3u IEEE 802.3ab Wireless Frequency Range 1 2.4 GHz to 2.4835 GHz 5.18 MHz to 5.85 MHz Device Interfaces 802.11ac/n/g/b/a Wireless LAN 10/100/1000 Gigabit Ethernet Port Reset Button WPS Button Wireless Security Wi-Fi Protected Access (WPA/WPA2) Wi-Fi Protected Setup (WPS) Advanced Features D-Link Wi-Fi setup app Compatible with D-Link Wi-Fi Mesh routers Dimensions 140.0 x 85.4 x 48.6 mm
(5.51 x 3.36 x 1.91 in) Weight 274 grams (9.7 oz) Certifications FCC IC CE UL CB Device Management Web UI D-Link Wi-Fi App Diagnostic LEDs Status/WPS 3 Segment Wi-Fi Signal Strength Indicator Operating Temperature 0 to 40 C (32 to 104 F) Storage Temperature Storage: -20 to 65 C (-4 to 149 F) Operating Humidity 10% to 90% non-condensing Storage Humidity 5% to 95% non-condensing Power Input 100 to 240 V AC, 50/60 Hz 1 Frequency range varies depending on local regulations D-Link DAP-X1860 User Manual 51 Appendix B - Technical Specifications GPL Code Statement This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (GPL) or GNU Lesser General Public License (LGPL). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at:
http://tsd.dlink.com.tw/GPL.asp The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL. WRITTEN OFFER FOR GPL AND LGPL SOURCE CODE Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL and LGPL. Please direct all inquiries to:
Email: GPLCODE@DLink.com Snail Mail:
Attn: GPLSOURCE REQUEST D-Link Systems, Inc. 17595 Mt. Herrmann Street Fountain Valley, CA 92708 GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2021 Free Software Foundation, Inc. http://fsf.org/ Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. D-Link DAP-X1860 User Manual 52 Appendix C - GPL Code Statement Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things. To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others. For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it. For the developers and authors protection, the GPL clearly explains that there is no warranty for this free software. For both users and authors sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users. D-Link DAP-X1860 User Manual 53 Appendix C - GPL Code Statement Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS 0. Definitions. This License refers to version 3 of the GNU General Public License. Copyright also means copyright-like laws that apply to other kinds of works, such as semiconductor masks. The Program refers to any copyrightable work licensed under this License. Each licensee is addressed as you. Licensees and recipients may be individuals or organizations. To modify a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a modified version of the earlier work or a work based on the earlier work. A covered work means either the unmodified Program or a work based on the Program. To propagate a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well. To convey a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying. An interactive user interface displays Appropriate Legal Notices to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work
(except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion. D-Link DAP-X1860 User Manual 54 Appendix C - GPL Code Statement 1. Source Code. The source code for a work means the preferred form of the work for making modifications to it. Object code means any non-source form of a work. A Standard Interface means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. The System Libraries of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form. A Major Component, in this context, means a major essential component (kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it. The Corresponding Source for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the works System Libraries, or general-purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work. For example, Corresponding Source includes interface definition files associated with source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between those subprograms and other parts of the work. The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source. The Corresponding Source for a work in source code form is that same work. D-Link DAP-X1860 User Manual 55 Appendix C - GPL Code Statement 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law. You may make, run and propagate covered works that you do not convey, without conditions so long as your license other-
wise remains in force. You may convey covered works to others for the sole purpose of having them make modifications exclu-
sively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you. Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed;
section 10 makes it unnecessary. 3. Protecting Users Legal Rights From Anti-Circumvention Law. No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures. When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the works users, your or third parties legal rights to forbid circumvention of technological measures. D-Link DAP-X1860 User Manual 56 Appendix C - GPL Code Statement 4. Conveying Verbatim Copies. You may convey verbatim copies of the Programs source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program. You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee. 5. Conveying Modified Source Versions. You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions:
a) The work must carry prominent notices stating that you modified it, and giving a relevant date. b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to keep intact all notices. c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it. d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so. A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an aggregate if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilations users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate. D-Link DAP-X1860 User Manual 57 Appendix C - GPL Code Statement 6. Conveying Non-Source Forms. You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, in one of these ways:
a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange. b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge. c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer, in accord with subsection 6 b. d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements. e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work. D-Link DAP-X1860 User Manual 58 Appendix C - GPL Code Statement A User Product is either (1) a consumer product, which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, normally used refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-consumer uses, unless such uses represent the only significant mode of use of the product. Installation Information for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made. If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product (for example, the work has been installed in ROM). The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network. Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying. D-Link DAP-X1860 User Manual 59 Appendix C - GPL Code Statement 7. Additional Terms. Additional permissions are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions. When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work). You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission. Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms:
a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as different from the original version; or d) Limiting the use for publicity purposes of names of licensors or authors of the material; or e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f ) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors. D-Link DAP-X1860 User Manual 60 Appendix C - GPL Code Statement All other non-permissive additional terms are considered further restrictions within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying. If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of the additional terms that apply to those files, or a notice indicating where to find the applicable terms. Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way. 8. Termination. You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11). However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation. Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice. Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10. D-Link DAP-X1860 User Manual 61 Appendix C - GPL Code Statement 9. Acceptance Not Required for Having Copies. You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so. 10. Automatic Licensing of Downstream Recipients. Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. An entity transaction is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the partys predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. D-Link DAP-X1860 User Manual 62 Appendix C - GPL Code Statement 11. Patents. A contributor is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributors contributor version. A contributors essential patent claims are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modification of the contributor version. For purposes of this definition, control includes the right to grant patent sublicenses in a manner consistent with the requirements of this License. Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributors essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. In the following three paragraphs, a patent license is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To grant such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party. If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent license to downstream recipients. Knowingly relying means you have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipients use of the covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are valid. If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it. D-Link DAP-X1860 User Manual 63 Appendix C - GPL Code Statement A patent license is discriminatory if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or that patent license was granted, prior to 28 March 2007. Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law. 12. No Surrender of Others Freedom. If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program. 13. Use with the GNU Affero General Public License. Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such. D-Link DAP-X1860 User Manual 64 Appendix C - GPL Code Statement 14. Revised Versions of this License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the GNU General Public License or any later version applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation. If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxys public statement of acceptance of a version permanently authorizes you to choose that version for the Program. Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version. 15. Disclaimer of Warranty. THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. D-Link DAP-X1860 User Manual 65 Appendix C - GPL Code Statement 16. Limitation of Liability. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 17. Interpretation of Sections 15 and 16. If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. D-Link DAP-X1860 User Manual 66 Appendix C - GPL Code Statement Regulatory Statements Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Non-modifications Statement:
Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. The country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in the USA must be fixed to USA operational channels only.
Caution:
Note D-Link DAP-X1860 User Manual 67 Appendix D - Regulatory Statements IMPORTANT NOTICE:
FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 24 cm between the radiator and your body. D-Link DAP-X1860 User Manual 68 Appendix D - Regulatory Statements Innovation, Science and Economic Development Canada (ISED) Statement:
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Innovation, Science and Economic Development Canada (ISED) Statement:
This device complies with ISED licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Radiation Exposure Statement This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 29 cm between the radiator and your body. Dclaration d'exposition aux radiations Cet quipement est conforme aux limites d'exposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 29 cm de distance entre la source de rayonnement et votre corps. Caution:
i.the device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
ii.for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate;
Avertissement:
i.les dispositifs fonctionnant dans la bande de 5 150 5 250 MHz sont rservs uniquement pour une utilisatin lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux ii.pour les dispositifs munis dantennes amovibles, le gain maximal dantenne permis (pour les dispositifs utilisant la bande de 5 725 5 850 MHz) doit tre conforme la limite de la p.i.r.e. spcifie, selon le cas;
D-Link DAP-X1860 User Manual 69 Appendix D - Regulatory Statements NCC :
MPE 1mW/cm20.218mW/cm2 D-Link DAP-X1860 User Manual 70 Appendix D - Regulatory Statements Frequency Band(s) Frequenzband Frquence bande(s) Bandas de Frecuencia Frequenza/e Frequentie(s) 5.15 5.25 GHz 5 G 5.25 5.35 GHz 5.47 5.725 GHz 2.4 G 2.4 2.4835 GHz Max. Output Power (EIRP) Max. Output Power Consommation dnergie max. Potencia mxima de Salida Potenza max. Output Max. Output Power 200 mW 200 mW 1 W 100 mW D-Link DAP-X1860 User Manual 71 Appendix D - Regulatory Statements esky [Czech]
Dansk [Danish]
Deutsch [German]
Eesti [Estonian]
English Espaol [Spanish]
[Greek]
Franais [French]
Italiano [Italian]
European Community Declaration of Conformity:
Tmto D-Link Corporation prohlauje, e tento produkt, jeho psluenstv a software jsou v souladu se smrnic 2014/53/EU. Cel text ES prohlen o shod vydanho EU a o firmwaru produktu lze sthnout na strnkch k produktu www.dlink.com. D-Link Corporation erklrer herved, at dette produkt, tilbehr og software er i overensstemmelse med direktiv 2014/53/EU. Den fulde tekst i EU-overensstemmelseserklringen og produktfirmware kan wnloades fra produktsiden hos www.dlink.com. Hiermit erklrt die D-Link Corporation, dass dieses Produkt, das Zubehr und die Software der Richtlinie 2014/53/
EU entsprechen. Der vollstndige Text der Konformittserklrung der Europischen Gemeinschaft sowie die Firmware zum Produkt stehen Ihnen zum Herunterladen von der Produktseite im Internet auf www.dlink.com zur Verfgung. Kesolevaga kinnitab D-Link Corporation, et see toode, tarvikud ja tarkvara on koosklas direktiiviga 2014/53/EL. Euroopa Liidu vastavusdeklaratsiooni tistekst ja toote psivara on allalaadimiseks saadaval tootelehel www.dlink. com. Hereby, D-Link Corporation, declares that this product, accessories, and software are in compliance with directive 2014/53/EU. The full text of the EU Declaration of Conformity and product firmware are available for download from the product page at www.dlink.com Por la presente, D-Link Corporation declara que este producto, accesorios y software cumplen con las directivas 2014/53/UE. El texto completo de la declaracin de conformidad de la UE y el firmware del producto estn disponibles y se pueden descargar desde la pgina del producto en www.dlink.com.
, D-Link Corporation , 2014/53/. www.dlink. com. Par les prsentes, D-Link Corporation dclare que ce produit, ces accessoires et ce logiciel sont conformes aux directives 2014/53/UE.Le texte complet de la dclaration de conformit de l'UE et le icroprogramme du produit sont disponibles au tlchargement sur la page des produits www.dlink.com. Con la presente, D-Link Corporation dichiara che questo prodotto, i relativi accessori e il software sono conformi alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformit UE e il firmware del prodotto sono disponibili per il download dalla pagina del prodotto su www.dlink.com. D-Link DAP-X1860 User Manual 72 Appendix D - Regulatory Statements Latviski [Latvian]
Lietuvi [Lithuanian]
Nederlands [Dutch]
Malti [Maltese]
Magyar [Hungarian]
Polski [Polish]
Ar o uzmums D-Link Corporation apliecina, ka is produkts, piederumi un programmatra atbilst direktvai 2014/53/ES. ES atbilstbas deklarcijas pilno tekstu un produkta apartprogrammatru var lejupieldt attiecg produkta lap vietn www.dlink.com. iuo dokumentu D-Link Corporation pareikia, kad is gaminys, priedai ir programin ranga atitinka direktyv 2014/53/ES. Vis ES atitikties deklaracijos tekst ir gaminio programin aparatin rang galima atsisisti i gaminio puslapio adresu www.dlink.com. Hierbij verklaart D-Link Corporation dat dit product, accessoires en software voldoen aan de richtlijnen 2014/53/
EU. De volledige tekst van de EU conformiteitsverklaring en productfirmware is beschikbaar voor download van de productpagina op www.dlink.com. Bil-preenti, D-Link Corporation tiddikjara li dan il-prodott, l-aessorji, u s-software huma konformi mad-Direttiva 2014/53/UE. Tista tniel it-test si tad-dikjarazzjoni ta konformit tal-UE u l-firmware tal-prodott mill-pana tal-
prodott fuq www.dlink.com. Ezennel a D-Link Corporation kijelenti, hogy a jelen termk, annak tartozkai s szoftvere megfelelnek a 2014/53/
EU sz. rendeletek rendelkezseinek. Az EU Megfelelsgi nyilatkozat teljes szvege s a termk firmware a termk oldalrl tlthet le a www.dlink.com cmen. D-Link Corporation niniejszym owiadcza, e ten produkt, akcesoria oraz oprogramowanie s zgodne z dyrektywami 2014/53/EU. Peen tekst deklaracji zgodnoci UE oraz oprogramowanie sprztowe do produktu mona pobra na stronie produktu w witrynie www.dlink.com. Portugus [Portuguese]
Desta forma, a D-Link Corporation declara que este produto, os acessrios e o software esto em conformidade com a diretiva 2014/53/UE. O texto completo da declarao de conformidade da UE e do firmware Slovensko[Slovenian]
Podjetje D-Link Corporation s tem izjavlja, da so ta izdelek, dodatna oprema in programnska oprema skladni z direktivami 2014/53/EU. Celotno besedilo izjave o skladnosti EU in vdelana programska oprema sta na voljo za prenos na strani izdelka na www.dlink.com. Slovensky [Slovak]
Suomi [Finnish]
Svenska[Swedish]
Spolonos D-Link tmto vyhlasuje, e tento produkt, prsluenstvo a softvr s v slade so smernicou 214/53/
E. pln znenie vyhlsenia E o zhode a firmvri produktu s k dispozcii na prevzatie zo strnky produktu www. dlink.com. D-Link Corporation tten vakuuttaa, ett tm tuote, lisvarusteet ja ohjelmisto ovat direktiivin 2014/53/EU vaatimusten mukaisia. Tydellinen EU-vaatimustenmukaisuusvakuutus samoin kuin tuotteen laiteohjelmisto ovat ladattavissa osoitteesta www.dlink.com. D-Link Corporation frskrar hrmed att denna produkt, tillbehr och programvara verensstmmer med direktiv 2014/53/EU. Hela texten med EU-frskran om verensstmmelse och produkt-firmware kan hmtas frn produktsidan p www.dlink.com. D-Link DAP-X1860 User Manual 73 Appendix D - Regulatory Statements slenska [Icelandic]
Norsk [Norwegian]
Hr me lsir D-Link Corporation v yfir a essi vara, fylgihlutir og hugbnaur eru samrmi vi tilskipun 2014/53/EB. Skja m ESB-samrmisyfirlsinguna heild sinni og fastbna vrunnar af vefsu vrunnar www. dlink.com. Herved erklrer D-Link Corporation at dette produktet, tilbehret og programvaren er i samsvar med direktivet 2014/53/EU. Den fullstendige teksten i EU-erklring om samsvar og produktets fastvare er tilgjengelig for nedlasting fra produktsiden p www.dlink.com. Warning Statement:
The power outlet should be near the device and easily accessible. D-Link DAP-X1860 User Manual 74 Appendix D - Regulatory Statements Usage Notes:
NOTICE OF WIRELESS RADIO LAN USAGE IN THE EUROPEAN COMMUNITY (FOR WIRELESS PRODUCT ONLY):
This device is restricted to indoor use when operated in the European Community using channels in the 5.15-5.35 GHz band to reduce the potential for interference. This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries. This equipment may be operated in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, and CY. To remain in conformance with European National spectrum usage regulations, frequency and channel limitations will be applied on the products according to the country where the equipment will be deployed. This device is restricted from functioning in Ad-hoc mode while operating in 5 GHz. Ad-hoc mode is direct peer-to-peer communication between two client devices without an Access Point. Access points will support DFS (Dynamic Frequency Selection) and TPC (Transmit Power Control) functionality as required when operating in 5 GHz band within the EU. Please refer to the product manual or datasheet to check whether your product uses 2.4 GHz and/or 5 GHz wireless. HINWEIS ZUR VERWENDUNG VON DRAHTLOS-NETZWERK (WLAN) IN DER EUROPISCHEN GEMEINSCHAFT ( NUR FR EIN DRAHTLOSES PRODUKT ) Der Betrieb dieses Gerts in der Europischen Gemeinschaft bei Nutzung von Kanlen im 5,15-5,35 GHz Frequenzband ist ausschlielich auf Innenrume beschrnkt, um das Interferenzpotential zu reduzieren. Bei diesem Gert handelt es sich um ein zum Einsatz in allen EU-Mitgliedsstaaten und in EFTA-Lndern - ausgenommen Frankreich. Der Betrieb dieses Gerts ist in den folgenden Lndern erlaubt: AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Gebrauchshinweise:
Um den in Europa geltenden nationalen Vorschriften zum Nutzen des Funkspektrums weiterhin zu entsprechen, werden Frequenz und Kanalbeschrnkungen, dem jeweiligen Land, in dem das Gert zum Einsatz kommt, entsprechend, auf die Produkte angewandt. Die Funktionalitt im Ad-hoc-Modus bei Betrieb auf 5 GHz ist fr dieses Gert eingeschrnkt. Bei dem Ad-hoc-Modus handelt es sich um eine Peer-to-Peer-Kommunikation zwischen zwei Client-Gerten ohneeinen Access Point. Access Points untersttzen die Funktionen DFS (Dynamic Frequency Selection) und TPC (Transmit Power Control) wie erforderlich bei Betrieb auf 5 GHz innerhalb der EU. Bitte schlagen Sie im Handbuch oder Datenblatt nach nach, ob Ihr Gert eine 2,4 GHz und / oder 5 GHz Verbindung nutzt. D-Link DAP-X1860 User Manual 75 Appendix D - Regulatory Statements AVIS CONCERNANT L'UTILISATION DE LA RADIO SANS FIL LAN DANS LA COMMUNAUT EUROPENNE (UNIQUEMENT POUR LES PRODUITS SANS FIL) Cet appareil est limit un usage intrieur lorsqu'il est utilis dans la Communaut europenne sur les canaux de la bande de 5,15 5,35 GHz afin de rduire les risques d'interfrences. Cet appareil est un systme de transmission large bande (metteur-rcepteur) de 2,4 GHz, destin tre utilis dans tous les tats-
membres de l'UE et les pays de l'AELE. Cet quipement peut tre utilis dans les pays suivants : AL, AD, BE , BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT , MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Notes d'utilisation:
Pour rester en conformit avec la rglementation nationale europenne en matire d'utilisation du spectre, des limites de frquence et de canal seront appliques aux produits selon le pays o l'quipement sera dploy. Cet appareil ne peut pas utiliser le mode Ad-hoc lorsqu'il fonctionne dans la bande de 5 GHz. Le mode Adhoc fournit une communication directe pair pair entre deux priphriques clients sans point d'accs. Les points d'accs prendront en charge les fonctionnalits DFS (Dynamic Frequency Selection) et TPC (Transmit Power Control) au besoin lors du fonctionnement dans la bande de 5 GHz au sein de l'UE. Merci de vous rfrer au guide d'utilisation ou de la fiche technique afin de vrifier si votre produit utilise 2.4 GHz et/ou 5 GHz sans fil. AVISO DE USO DE LA LAN DE RADIO INALMBRICA EN LA COMUNIDAD EUROPEA (SOLO PARA EL PRODUCTO INALMBRICO) El uso de este dispositivo est restringido a interiores cuando funciona en la Comunidad Europea utilizando canales en la banda de 5,15-5,35 GHz, para reducir la posibilidad de interferencias. Este dispositivo es un sistema de transmisin (transceptor) de banda ancha de 2,4 GHz, pensado para su uso en todos los estados miembros de la UE y en los pases de la AELC. Este equipo se puede utilizar en AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Notas de uso:
Para seguir cumpliendo las normas europeas de uso del espectro nacional, se aplicarn limitaciones de frecuencia y canal en los productos en funcin del pas en el que se pondr en funcionamiento el equipo. Este dispositivo tiene restringido el funcionamiento en modo Ad-hoc mientras funcione a 5 Ghz. El modo Ad-hoc es la comunicacin directa de igual a igual entre dos dispositivos cliente sin un punto de acceso. Los puntos de acceso admitirn la funcionalidad DFS (Seleccin de frecuencia dinmica) y TPC (Control de la potencia de transmisin) si es necesario cuando funcionan a 5 Ghz dentro de la UE. Por favor compruebe el manual o la ficha de producto para comprobar si el producto utiliza las bandas inalmbricas de 2.4 GHz y/o la de 5 GHz. D-Link DAP-X1860 User Manual 76 Appendix D - Regulatory Statements AVVISO PER LUSO DI LAN RADIO WIRELESS NELLA COMUNIT EUROPEA (SOLO PER PRODOTTI WIRELESS) Nella Comunit europea, luso di questo dispositivo limitato esclusivamente agli ambienti interni sui canali compresi nella banda da 5,15 a 5,35 GHz al fine di ridurre potenziali interferenze. Questo dispositivo un sistema di trasmissione a banda larga a 2,4 GHz (ricetrasmittente), destinato alluso in tutti gli stati membri dellUnione europea e nei paesi EFTA. Questo dispositivo pu essere utilizzato in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Note per luso Al fine di mantenere la conformit alle normative nazionali europee per luso dello spettro di frequenze, saranno applicate limitazioni sulle frequenze e sui canali per il prodotto in conformit alle normative del paese in cui il dispositivo viene utilizzato. Questo dispositivo non pu essere attivato in modalit Ad-hoc durante il funzionamento a 5 Ghz. La modalit Ad-hoc una comunicazione diretta peer-to-peer fra due dispositivi client senza un punto di accesso. I punti di accesso supportano le funzionalit DFS (Dynamic Frequency Selection) e TPC (Transmit Power Control) richieste per operare a 5 Ghz nellUnione europea. Ti invitiamo a fare riferimento al manuale del prodotto o alla scheda tecnica per verificare se il tuo prodotto utilizza le frequenze 2,4 GHz e/o 5 GHz. KENNISGEVING VAN DRAADLOOS RADIO LAN-GEBRUIK IN DE EUROPESE GEMEENSCHAP (ALLEEN VOOR DRAADLOOS PRODUCT) Dit toestel is beperkt tot gebruik binnenshuis wanneer het wordt gebruikt in de Europese Gemeenschap gebruik makend van kanalen in de 5.15-5.35 GHz band om de kans op interferentie te beperken. Dit toestel is een 2.4 GHz breedband transmissiesysteem (transceiver) dat bedoeld is voor gebruik in alle EU lidstaten en EFTA landen. Deze uitrusting mag gebruikt worden in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Gebruiksaanwijzingen:
Om de gebruiksvoorschriften van het Europese Nationale spectrum na te leven, zullen frequentie- en kanaalbeperkingen worden toegepast op de producten volgens het land waar de uitrusting gebruikt zal worden. Dit toestel kan niet functioneren in Ad-hoc mode wanneer het gebruikt wordt in 5 GHz. Ad-hoc mode is directe peer-to-peer communicatie tussen twee klantenapparaten zonder een toegangspunt. Toegangspunten ondersteunen DFS (Dynamic Frequency Selection) en TPC (Transmit Power Control) functionaliteit zoals vereist bij gebruik in 5 GHz binnen de EU. Raadpleeg de handleiding of de datasheet om te controleren of uw product gebruik maakt van 2.4 GHz en/of 5 GHz. D-Link DAP-X1860 User Manual 77 Appendix D - Regulatory Statements SAFETY INSTRUCTIONS The following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage. Remember to consult the product user instructions for more details. Static electricity can be harmful to electronic components. Discharge static electricity from your body (i.e. touching grounded bare metal) before touching the product. Do not attempt to service the product and never disassemble the product. For some products with a user replaceable battery, please read and follow the instructions in the user manual. Do not spill food or liquid on your product and never push any objects into the openings of your product. Do not use this product near water, areas with high humidity, or condensation unless the product is specifically rated for outdoor application. Keep the product away from radiators and other heat sources. Always unplug the product from mains power before cleaning and use a dry lint free cloth only. SICHERHEITSVORSCHRIFTEN Die folgenden allgemeinen Sicherheitsvorschriften dienen als Hilfe zur Gewhrleistung Ihrer eigenen Sicherheit und zum Schutz Ihres Produkts. Weitere Details finden Sie in den Benutzeranleitungen zum Produkt. Statische Elektrizitt kann elektronischen Komponenten schaden. Um Schden durch statische Aufladung zu vermeiden, leiten Sie elektrostatische Ladungen von Ihrem Krper ab,
(z. B. durch Berhren eines geerdeten blanken Metallteils), bevor Sie das Produkt berhren. Unterlassen Sie jeden Versuch, das Produkt zu warten, und versuchen Sie nicht, es in seine Bestandteile zu zerlegen. Fr einige Produkte mit austauschbaren Akkus lesen Sie bitte das Benutzerhandbuch und befolgen Sie die dort beschriebenen Anleitungen. Vermeiden Sie, dass Speisen oder Flssigkeiten auf Ihr Produkt gelangen, und stecken Sie keine Gegenstnde in die Gehuseschlitze oder
-ffnungen Ihres Produkts. Verwenden Sie dieses Produkt nicht in unmittelbarer Nhe von Wasser und nicht in Bereichen mit hoher Luftfeuchtigkeit oder Kondensation, es sei denn, es ist speziell zur Nutzung in Auenbereichen vorgesehen und eingestuft. Halten Sie das Produkt von Heizkrpern und anderen Quellen fern, die Wrme erzeugen. Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschlielich ein trockenes fusselfreies Tuch. D-Link DAP-X1860 User Manual 78 Appendix D - Regulatory Statements CONSIGNES DE SCURIT Les consignes gnrales de scurit ci-aprs sont fournies afin dassurer votre scurit personnelle et de protger le produit dventuels dommages. Veuillez consulter les consignes dutilisation du produit pour plus de dtails. Llectricit statique peut endommager les composants lectroniques. Dchargez llectricit statique de votre corps (en touchant un objet en mtal reli la terre par exemple) avant de toucher le produit. Nessayez pas dintervenir sur le produit et ne le dmontez jamais. Pour certains produits contenant une batterie remplaable par lutilisateur, veuillez lire et suivre les consignes contenues dans le manuel dutilisation. Ne renversez pas daliments ou de liquide sur le produit et ninsrez jamais dobjets dans les orifices. Nutilisez pas ce produit proximit dun point deau, de zones trs humides ou de condensation sauf si le produit a t spcifiquement conu pour une application extrieure. loignez le produit des radiateurs et autres sources de chaleur. Dbranchez toujours le produit de lalimentation avant de le nettoyer et utilisez uniquement un chiffon sec non pelucheux. INSTRUCCIONES DE SEGURIDAD Las siguientes directrices de seguridad general se facilitan para ayudarle a garantizar su propia seguridad personal y para proteger el producto frente a posibles daos. No olvide consultar las instrucciones del usuario del producto para obtener ms informacin. La electricidad esttica puede resultar nociva para los componentes electrnicos. Descargue la electricidad esttica de su cuerpo (p. ej., tocando algn metal sin revestimiento conectado a tierra) antes de tocar el producto. No intente realizar el mantenimiento del producto ni lo desmonte nunca. Para algunos productos con batera reemplazable por el usuario, lea y siga las instrucciones del manual de usuario. No derrame comida o lquidos sobre el producto y nunca deje que caigan objetos en las aberturas del mismo. No utilice este producto cerca del agua, en zonas con humedad o condensacin elevadas a menos que el producto est clasificado especficamente para aplicacin en exteriores. Mantenga el producto alejado de los radiadores y de otras fuentes de calor. Desenchufe siempre el producto de la alimentacin de red antes de limpiarlo y utilice solo un pao seco sin pelusa. D-Link DAP-X1860 User Manual 79 Appendix D - Regulatory Statements ISTRUZIONI PER LA SICUREZZA Le seguenti linee guida sulla sicurezza sono fornite per contribuire a garantire la sicurezza personale degli utenti e a proteggere il prodotto da potenziali danni. Per maggiori dettagli, consultare le istruzioni per lutente del prodotto. Lelettricit statica pu essere pericolosa per i componenti elettronici. Scaricare lelettricit statica dal corpo (ad esempio toccando una parte metallica collegata a terra) prima di toccare il prodotto. Non cercare di riparare il prodotto e non smontarlo mai. Per alcuni prodotti dotati di batteria sostituibile dallutente, leggere e seguire le istruzioni riportate nel manuale dellutente. Non versare cibi o liquidi sul prodotto e non spingere mai alcun oggetto nelle aperture del prodotto. Non usare questo prodotto vicino allacqua, in aree con elevato grado di umidit o soggette a condensa a meno che il prodotto non sia specificatamente approvato per uso in ambienti esterni. Tenere il prodotto lontano da caloriferi e altre fonti di calore. Scollegare sempre il prodotto dalla presa elettrica prima di pulirlo e usare solo un panno asciutto che non lasci filacce. VEILIGHEIDSINFORMATIE De volgende algemene veiligheidsinformatie werd verstrekt om uw eigen persoonlijke veiligheid te waarborgen en uw product te beschermen tegen mogelijke schade. Denk eraan om de gebruikersinstructies van het product te raadplegen voor meer informatie. Statische elektriciteit kan schadelijk zijn voor elektronische componenten. Ontlaad de statische elektriciteit van uw lichaam (d.w.z. het aanraken van geaard bloot metaal) voordat uhet product aanraakt. U mag nooit proberen het product te onderhouden en u mag het product nooit demonteren. Voor sommige producten met door de gebruiker te vervangen batterij, dient u de instructies in de gebruikershandleiding te lezen en te volgen. Mors geen voedsel of vloeistof op uw product en u mag nooit voorwerpen in de openingen van uw product duwen. Gebruik dit product niet in de buurt van water, gebieden met hoge vochtigheid of condensatie, tenzij het product specifiek geclassificeerd is voor gebruik buitenshuis. Houd het product uit de buurt van radiators en andere warmtebronnen. U dient het product steeds los te koppelen van de stroom voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek. D-Link DAP-X1860 User Manual 80 Appendix D - Regulatory Statements Disposing and Recycling Your Product ENGLISH EN DE This symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed of in household waste but sent for recycling. Please take it to a collection point designated by your local authorities once it has reached the end of its life, some will accept products for free. By recycling the product and its packaging in this manner you help to conserve the environment and protect human health. D-Link and the Environment At D-Link, we understand and are committed to reducing any impact our operations and products may have on the environment. To minimise this impact D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging. D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions. To learn more about our environmentally responsible products and packaging please visit www.dlinkgreen.com. DEUTSCH Dieses Symbol auf dem Produkt oder der Verpackung weist darauf hin, dass dieses Produkt gem bestehender rtlicher Gesetze und Vorschriften nicht ber den normalen Hausmll entsorgt werden sollte, sondern einer Wiederverwertung zuzufhren ist. Bringen Sie es bitte zu einer von Ihrer Kommunalbehrde entsprechend amtlich ausgewiesenen Sammelstelle, sobald das Produkt das Ende seiner Nutzungsdauer erreicht hat. Fr die Annahme solcher Produkte erheben einige dieser Stellen keine Gebhren. Durch ein auf diese Weise durchgefhrtes Recycling des Produkts und seiner Verpackung helfen Sie, die Umwelt zu schonen und die menschliche Gesundheit zu schtzen. D-Link und die Umwelt D-Link ist sich den mglichen Auswirkungen seiner Geschftsttigkeiten und seiner Produkte auf die Umwelt bewusst und fhlt sich verpflichtet, diese entsprechend zu mindern. Zu diesem Zweck entwickelt und stellt D-Link seine Produkte mit dem Ziel grtmglicher Umweltfreundlichkeit her und verwendet wiederverwertbare, schadstoffarme Materialien bei Produktherstellung und Verpackung. D-Link empfiehlt, Ihre Produkte von D-Link, wenn nicht in Gebrauch, immer auszuschalten oder vom Netz zu nehmen. Auf diese Weise helfen Sie, Energie zu sparen und CO2-Emissionen zu reduzieren. Wenn Sie mehr ber unsere umweltgerechten Produkte und Verpackungen wissen mchten, finden Sie entsprechende Informationen im Internet unter www.dlinkgreen.com. D-Link DAP-X1860 User Manual 81 Appendix D - Regulatory Statements FRANAIS ESPAOL Ce symbole appos sur le produit ou son emballage signifie que, conformment aux lois et rglementations locales, ce produit ne doit pas tre limin avec les dchets domestiques mais recycl. Veuillez le rapporter un point de collecte prvu cet effet par les autorits locales; certains accepteront vos produits gratuitement. En recyclant le produit et son emballage de cette manire, vous aidez prserver lenvironnement et protger la sant de lhomme. D-Link et lenvironnement Chez D-Link, nous sommes conscients de l'impact de nos oprations et produits sur l'environnement et nous engageons le rduire. Pour limiter cet impact, D-Link conoit et fabrique ses produits de manire aussi cologique que possible, en utilisant des matriaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages. D-Link recommande de toujours teindre ou dbrancher vos produits D-Link lorsque vous ne les utilisez pas. Vous raliserez ainsi des conomies dnergie et rduirez vos missions de CO2. Pour en savoir plus sur les produits et emballages respectueux de lenvironnement, veuillez consulter le www.dlinkgreen.com. FR ES Este smbolo en el producto o el embalaje significa que, de acuerdo con la legislacin y la normativa local, este producto no se debe desechar en la basura domstica sino que se debe reciclar. Llvelo a un punto de recogida designado por las autoridades locales una vez que ha llegado al fin de su vida til; algunos de ellos aceptan recogerlos de forma gratuita. Al reciclar el producto y su embalaje de esta forma, contribuye a preservar el medio ambiente y a proteger la salud de los seres humanos. D-Link y el medio ambiente En D-Link, comprendemos y estamos comprometidos con la reduccin del impacto que puedan tener nuestras actividades y nuestros productos en el medio ambiente. Para reducir este impacto, D-Link disea y fabrica sus productos para que sean lo ms ecolgicos posible, utilizando materiales reciclables y de baja toxicidad tanto en los productos como en el embalaje. D-Link recomienda apagar o desenchufar los productos D-Link cuando no se estn utilizando. Al hacerlo, contribuir a ahorrar energa y a reducir las emisiones de CO2. Para obtener ms informacin acerca de nuestros productos y embalajes ecolgicos, visite el sitio www.dlinkgreen.com. D-Link DAP-X1860 User Manual 82 Appendix D - Regulatory Statements ITALIANO D-Link e l'ambiente NEDERLANDS D-Link en het milieu La presenza di questo simbolo sul prodotto o sulla confezione del prodotto indica che, in conformit alle leggi e alle normative locali, questo prodotto non deve essere smaltito nei rifiuti domestici, ma avviato al riciclo. Una volta terminato il ciclo di vita utile, portare il prodotto presso un punto di raccolta indicato dalle autorit locali. Alcuni questi punti di raccolta accettano gratuitamente i prodotti da riciclare. Scegliendo di riciclare il prodotto e il relativo imballaggio, si contribuir a preservare l'ambiente e a salvaguardare la salute umana. D-Link cerca da sempre di ridurre l'impatto ambientale dei propri stabilimenti e dei propri prodotti. Allo scopo di ridurre al minimo tale impatto, D-Link progetta e realizza i propri prodotti in modo che rispettino il pi possibile l'ambiente, utilizzando materiali riciclabili a basso tasso di tossicit sia per i prodotti che per gli imballaggi. D-Link raccomanda di spegnere sempre i prodotti D-Link o di scollegarne la spina quando non vengono utilizzati. In questo modo si contribuir a risparmiare energia e a ridurre le emissioni di anidride carbonica. Per ulteriori informazioni sui prodotti e sugli imballaggi D-Link a ridotto impatto ambientale, visitate il sito all'indirizzo www.dlinkgreen.com. Dit symbool op het product of de verpakking betekent dat dit product volgens de plaatselijke wetgeving niet mag worden weggegooid met het huishoudelijk afval, maar voor recyclage moeten worden ingeleverd. Zodra het product het einde van de levensduur heeft bereikt, dient u het naar een inzamelpunt te brengen dat hiertoe werd aangeduid door uw plaatselijke autoriteiten, sommige autoriteiten accepteren producten zonder dat u hiervoor dient te betalen. Door het product en de verpakking op deze manier te recyclen helpt u het milieu en de gezondheid van de mens te beschermen. Bij D-Link spannen we ons in om de impact van onze handelingen en producten op het milieu te beperken. Om deze impact te beperken, ontwerpt en bouwt D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en verpakking. D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies. Breng een bezoek aan www.dlinkgreen.com voor meer informatie over onze milieuverantwoorde producten en verpakkingen. IT NL D-Link DAP-X1860 User Manual 83 Appendix D - Regulatory Statements Ten symbol umieszczony na produkcie lub opakowaniu oznacza, e zgodnie z miejscowym prawem i lokalnymi przepisami niniejszego produktu nie wolno wyrzuca jak odpady czy mieci z gospodarstwa domowego, lecz naley go podda procesowi recyklingu. Po zakoczeniu uytkowania produktu, niektre odpowiednie do tego celu podmioty przyjm takie produkty nieodpatnie, dlatego prosimy dostarczy go do punktu zbirki wskazanego przez lokalne wadze. Poprzez proces recyklingu i dziki takiemu postpowaniu z produktem oraz jego opakowaniem, pomog Pastwo chroni rodowisko naturalne i dba o ludzkie zdrowie. D-Link i rodowisko D-Link podchodzimy w sposb wiadomy do ochrony otoczenia oraz jestemy zaangaowani w zmniejszanie wpywu naszych dziaa i produktw na rodowisko naturalne. W celu zminimalizowania takiego wpywu firma D-Link konstruuje i wytwarza swoje produkty w taki sposb, aby byy one jak najbardziej przyjazne rodowisku, stosujc do tych celw materiay nadajce si do powtrnego wykorzystania, charakteryzujce si ma toksycznoci zarwno w przypadku samych produktw jak i opakowa. Firma D-Link zaleca, aby Pastwo zawsze prawidowo wyczali z uytku swoje produkty D-Link, gdy nie s one wykorzystywane. Postpujc w ten sposb pozwalaj Pastwo oszczdza energi i zmniejsza emisje CO2. Aby dowiedzie si wicej na temat produktw i opakowa majcych wpyw na rodowisko prosimy zapozna si ze stron Internetow www. dlinkgreen.com. POLSKI ESKY PL CZ Tento symbol na vrobku nebo jeho obalu znamen, e podle mstn platnch pedpis se vrobek nesm vyhazovat do komunlnho odpadu, ale odeslat k recyklaci. A vrobek doslou, odneste jej prosm na sbrn msto uren mstnmi ady k tomuto elu. Nkter sbrn msta pijmaj vrobky zdarma. Recyklac vrobku i obalu pomhte chrnit ivotn prosted i lidsk zdrav. D-Link a ivotn prosted Ve spolenosti D-Link jsme si vdomi vlivu naich provoz a vrobk na ivotn prosted a sname se o minimalizaci tchto vliv. Proto sv vrobky navrhujeme a vyrbme tak, aby byly co nejekologitj, a ve vrobcch i obalech pouvme recyklovateln a nzkotoxick materily. Spolenost D-Link doporuuje, abyste sv vrobky znaky D-Link vypnuli nebo vythli ze zsuvky vdy, kdy je nepouvte. Pomete tak etit energii a snit emise CO2. Vce informac o naich ekologickch vrobcch a obalech najdete na adrese www.dlinkgreen.com. D-Link DAP-X1860 User Manual 84 Appendix D - Regulatory Statements MAGYAR Ez a szimblum a termken vagy a csomagolson azt jelenti, hogy a helyi trvnyeknek s szablyoknak megfelelen ez a termk nem semmisthet meg a hztartsi hulladkkal egytt, hanem jrahasznostsra kell kldeni. Krjk, hogy a termk lettartamnak elteltt kveten vigye azt a helyi hatsg ltal kijellt gyjthelyre. A termkek egyes helyeken ingyen elhelyezhetk. A termk s a csomagols jrahasznostsval segti vdeni a krnyezetet s az emberek egszsgt. A D-Link s a krnyezet A D-Linknl megrtjk s elktelezettek vagyunk a mveleteink s termkeink krnyezetre gyakorolt hatsainak cskkentsre. Az ezen hats cskkentse rdekben a D-Link a lehet leginkbb krnyezetbart termkeket tervez s gyrt azltal, hogy jrahasznosthat, alacsony krosanyag-
tartalm termkeket gyrt s csomagolsokat alkalmaz. A D-Link azt javasolja, hogy mindig kapcsolja ki vagy hzza ki a D-Link termkeket a tpforrsbl, ha nem hasznlja azokat. Ezzel segt az energia megtakartsban s a szndioxid kibocstsnak cskkentsben. Krnyezetbart termkeinkrl s csomagolsainkrl tovbbi informcikat a www.dlinkgreen.com weboldalon tudhat meg. HU NO Dette symbolet p produktet eller forpakningen betyr at dette produktet iflge lokale lover og forskrifter ikke skal kastes sammen med husholdningsavfall, men leveres inn til gjenvinning. Vennligst ta det til et innsamlingssted anvist av lokale myndigheter nr det er kommet til slutten av levetiden. Noen steder aksepteres produkter uten avgift. Ved p denne mten gjenvinne produktet og forpakningen hjelper du verne miljet og beskytte folks helse. NORSK D-Link og miljet Hos D-Link forstr vi oss p og er forpliktet til minske innvirkningen som vr drift og vre produkter kan ha p miljet. For minimalisere denne innvirkningen designer og lager D-Link produkter som er s miljvennlig som mulig, ved bruke resirkulerbare, lav-toksiske materialer bde i produktene og forpakningen. D-Link anbefaler at du alltid slr av eller frakobler D-Link-produkter nr de ikke er i bruk. Ved gjre dette hjelper du spare energi og redusere CO2-utslipp. For mer informasjon angende vre miljansvarlige produkter og forpakninger kan du g til www.dlinkgreen.com. D-Link DAP-X1860 User Manual 85 Appendix D - Regulatory Statements DK FI D-Link og miljet DANSK SUOMI Dette symbol p produktet eller emballagen betyder, at dette produkt i henhold til lokale love og regler ikke m bortskaffes som husholdningsaffald, mens skal sendes til genbrug. Indlever produktet til et indsamlingssted som angivet af de lokale myndigheder, nr det er net til slutningen af dets levetid. I nogle tilflde vil produktet blive modtaget gratis. Ved at indlevere produktet og dets emballage til genbrug p denne mde bidrager du til at beskytte miljet og den menneskelige sundhed. Hos D-Link forstr vi og bestrber os p at reducere enhver indvirkning, som vores aktiviteter og produkter kan have p miljet. For at minimere denne indvirkning designer og producerer D-Link sine produkter, s de er s miljvenlige som muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i bde produkter og emballage. D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, nr de ikke er i brug. Ved at gre det bidrager du til at spare energi og reducere CO2-udledningerne. Du kan finde flere oplysninger om vores miljmssigt ansvarlige produkter og emballage p www.dlinkgreen.com. Tm symboli tuotteen pakkauksessa tarkoittaa, ett paikallisten lakien ja snnsten mukaisesti tt tuotetta ei pid hvitt yleisen kotitalousjtteen seassa vaan se tulee toimittaa kierrtettvksi. Kun tuote on elinkaarensa pss, toimita se lhimpn viranomaisten hyvksymn kierrtyspisteeseen. Kierrttmll kytetyn tuotteen ja sen pakkauksen autat tukemaan sek ympristn ett ihmisten terveytt ja hyvinvointia. D-Link ja ymprist D-Link ymmrt ympristnsuojelun trkeyden ja on sitoutunut vhentmn tuotteistaan ja niiden valmistuksesta ympristlle mahdollisesti aiheutuvia haittavaikutuksia. Nm negatiiviset vaikutukset minimoidakseen D-Link suunnittelee ja valmistaa tuotteensa mahdollisimman ympristystvllisiksi kyttmll kierrtettvi, alhaisia pitoisuuksia haitallisia aineita sisltvi materiaaleja sek tuotteissaan ett niiden pakkauksissa. Suosittelemme, ett irrotat D-Link-tuotteesi virtalhteest tai sammutat ne aina, kun ne eivt ole kytss. Toimimalla nin autat sstmn energiaa ja vhentmn hiilidioksiidipstj. Lue lis ympristystvllisist D-Link-tuotteista ja pakkauksistamme osoitteesta www.dlinkgreen.com. D-Link DAP-X1860 User Manual 86 Appendix D - Regulatory Statements SVENSKA D-Link och miljn PORTUGUS Den hr symbolen p produkten eller frpackningen betyder att produkten enligt lokala lagar och freskrifter inte skall kastas i hushllssoporna utan i stllet tervinnas. Ta den vid slutet av dess livslngd till en av din lokala myndighet utsedd uppsamlingsplats, vissa accepterar produkter utan kostnad. Genom att p detta stt tervinna produkten och frpackningen hjlper du till att bevara miljn och skydda mnniskors hlsa. P D-Link frstr vi och r fast beslutna att minska den pverkan vra verksamheter och produkter kan ha p miljn. Fr att minska denna pverkan utformar och bygger D-Link sina produkter fr att de ska vara s miljvnliga som mjligt, genom att anvnda tervinningsbara material med lg gifthalt i bde produkter och frpackningar. D-Link rekommenderar att du alltid stnger av eller kopplar ur dina D-Link produkter nr du inte anvnder dem. Genom att gra detta hjlper du till att spara energi och minska utslpp av koldioxid. Fr mer information om vra miljansvariga produkter och frpackningar www.dlinkgreen.com. Este smbolo no produto ou embalagem significa que, de acordo com as leis e regulamentaes locais, este produto no dever ser eliminado juntamente com o lixo domstico mas enviado para a reciclagem. Transporte-o para um ponto de recolha designado pelas suas autoridades locais quando este tiver atingido o fim da sua vida til, alguns destes pontos aceitam produtos gratuitamente. Ao reciclar o produto e respectiva embalagem desta forma, ajuda a preservar o ambiente e protege a sade humana. A D-Link e o ambiente Na D-Link compreendemos e comprometemo-nos com a reduo do impacto que as nossas operaes e produtos possam ter no ambiente. Para minimizar este impacto a D-Link concebe e constri os seus produtos para que estes sejam o mais inofensivos para o ambiente possvel, utilizando meteriais reciclveis e no txicos tanto nos produtos como nas embalagens. A D-Link recomenda que desligue os seus produtos D-Link quando estes no se encontrarem em utilizao. Com esta aco ajudar a poupar energia e reduzir as emisses de CO2. Para saber mais sobre os nossos produtos e embalagens responsveis a nvel ambiental visite www.dlinkgreen.com. SE PT D-Link DAP-X1860 User Manual 87 Appendix D - Regulatory Statements
1 2 | Internal photos | Internal Photos | 2.18 MiB | December 23 2020 / June 22 2021 | delayed release |
1 2 | External photos | External Photos | 377.48 KiB | December 23 2020 / June 22 2021 | delayed release |
1 2 | Label Sample and Label Location rev | ID Label/Location Info | 563.29 KiB | December 23 2020 |
FCC ID: KA2APX1860A1 IC: 4216A-APX1860A1 M/N: DAP-X1860A1 CAN ICES-3 (B)/ NMB-3 (B) 15 S/N LABEL E314497 I.T.E. Input: 100-240Va.c. 50/60Hz 0.2A Made in China 35
1 2 | Agent authorization | Cover Letter(s) | 22.48 KiB | December 23 2020 |
-Link in Date: 2020/8/31 FCC ID: KA2APX1860A1 AUTHORIZATION LETTER To Whom It May Concern:
D-Link Corporation hereby authorizes Debby Lin/Senior Specialist of Bureau Veritas Consumer Products Services (H.K.)} Ltd., Taoyuan Branch (BV CPS Taoyuan), to act on its behalf in all matters relating to the Federal Communication Commission (FCC) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Debby Lin/Senior Specialist of BV CPS Taoyuan on D-Link Corporations behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please dont hesitate to contact us. Sincerely yours, Alex Chiang / Director D-Link Corporation Tel: +886-2-66000123#2340 Fax: +886-2-55509988 E-mail: alex.chiang@dlinkcorp.com
1 2 | Confidentiality request (Long term) | Cover Letter(s) | 23.34 KiB | December 23 2020 |
-Link in Date: 2020/8/31 FCC ID: KA2ZAPX1860A1 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:
Schematics Block Diagram Operational Description Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, Alex Chiang / Director D-Link Corporation Tel: +886-2-66000123#2340 Fax: +886-2-55509988 E-mail: alex.chiang@dlinkcorp.com
1 2 | Confidentiality request (Short term) | Cover Letter(s) | 18.25 KiB | December 23 2020 |
-Link Date: 2020/8/31 FCC ID: KAZAPX1860A1 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commissions rules, we request short-term confidential treatment for the following information until 180 days in order to ensure sensitive business information remains confidential until the actual marketing of the device:
External photos Test Setup photos Users manual Internal Photos Sincerely yours, Alex Chiang / Director D-Link Corporation Tel: +886-2-66000123#2340 Fax: +886-2-55509988 E-mail: alex.chiang@dlinkcorp.com
1 2 | Contact Authorization | Cover Letter(s) | 45.25 KiB | December 23 2020 |
D Link 17595 Mt. Herrmann Street Fountain Valley, CA92708 USA May 1*', 2019 Power of Attorney To whom it may concern:
|, the undersigned, Brett Adair, hereby authorize the persons listed below to act on behalf of me to sign all related documents for D-Links FCC application. | am the Point of Contact for the FCC. This Power of Attorney supersedes and voids all previous Powers of Attorney. Our FRNis: 0007371172 SSSBU ML Jean / Vice President
+886-2-66000123 #5650 ML. Jean@dlinkcorp.com Hans Liu / Director
+886-2-66000123 #5836 Hans.Liu@dlinkcorp.com Alex Chiang / Director
+886-2-66000123 #2340 Alex.Chiang@dlinkcorp.com GK Lee / Vice President
+886-2-66000123 #5551 GK.Lee@dlinkcorp.com Company Name: D-Link Co. Ltd Fax: 886-2-55509988 Company Address: No.289, Sinhu 3 Rd., Neihu District, Taipei City 114, Taiwan, R.O.C Authorization period: May 1, 2019 Dec 31, 2020 Should you have and question regarding this power of attorney, please dont hesitate to Contact me. Sincerely, BE Teele Ciel -1-] Orel De mal TEL: (714) 885-6000 E-mail: brett.adair@dlink.com
1 2 | Test setup photos | Test Setup Photos | 735.98 KiB | December 23 2020 / June 22 2021 | delayed release |
1 2 | Attestation (Channel and Mode Declaration) | Attestation Statements | 14.92 KiB | December 23 2020 |
a
-Link Date: 2020/8/31 We, D-Link Corporation declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: KA2ZAPX1860A1 If you should have any question(s) regarding this declaration, please dont hesitate to contact us. Thank you!
dt Alex Chiang / Director D-Link Corporation Tel: +886-2-66000123#2340 Fax: +886-2-55509988 E-mail: alex.chiang@dlinkcorp.com
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-12-23 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
2 | 2412 ~ 2462 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2020-12-23
|
||||
1 2 | Applicant's complete, legal business name |
D-Link Corporation
|
||||
1 2 | FCC Registration Number (FRN) |
0007371172
|
||||
1 2 | Physical Address |
17595 Mt. Herrmann
|
||||
1 2 |
Fountain Valley, CA
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@nacsemc.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
KA2
|
||||
1 2 | Equipment Product Code |
APX1860A1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
B******** A********
|
||||
1 2 | Title |
General Counsel
|
||||
1 2 | Telephone Number |
714-8********
|
||||
1 2 | Fax Number |
866-7********
|
||||
1 2 |
b******@dlink.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 06/22/2021 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | AX1800 Mesh Wi-Fi 6 Range Extender | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is maximum combined conducted output power. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 24 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device is restricted to indoor use only. | ||||
1 2 | Power listed is maximum combined conducted output power. This device supports 20 and 40 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 24 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
||||
1 2 | Name |
E**** L****
|
||||
1 2 | Telephone Number |
886-3******** Extension:
|
||||
1 2 | Fax Number |
+886-********
|
||||
1 2 |
e******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC MO | 5180 | 5240 | 0.278 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | CC MO | 5745 | 5825 | 0.527 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC MO | 2412.00000000 | 2462.00000000 | 0.6680000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC