DCH-S163 A1 Simple Setup Pro Series Battery-powered Remote Water Sensing Pod Add-on for the Whole Home Smart Wi-Fi Water Leak Sensor Kit Quick Installation Guide Note: Make sure that your DCH-S162 hub is set up and functioning properly beforehand. 1 Get the mydlink app on the App Store or on Google Play. Launch the app, then Sign In or Create a New Account. mydlink Note: This is an add-on to the Pro Series Whole Home Smart Wi-Fi Water Leak Sensor Starter Kit. The DCH-S162 is required for this device to function. 2 Tap then tap Add a Device.
(pre-installed) Setup Code This is your devices Setup Code. Please keep it as future reference for your device. 3 Tap Scan, then scan the Setup Code located in the Setup Code section. Follow the app instructions to set up your device with your DCH-S162 hub. LED Behavior FAQ Status LED Waiting to pair Water leak detected Connection failed Paired to the hub Power saving mode Need Help?
Having trouble installing your new product? D-Links support website contains live chat, video tutorials, commonly asked questions, the latest user documentation and software updates for D-Link products. Contact Us http://support.dlink.ca
(800) 361-5265 Setup and How To videos available here:
YouTube.com/DLinkTutorials What do I do if my device is not working properly?
Reset and reinstall your device. During installation, ensure that:
Your router is connected to the Internet and Wi-Fi is enabled Your mobile device is connected to your routers Wi-Fi and Bluetooth is enabled Your mydlink device is in range of your Wi-Fi network Ensure that your DCH-S162 hub is powered on and installed correctly How do I reset my device?
DCH-S163: Press and hold the Reset button until it blinks red. Reset button How do I install additional DCH-S163 units?
In the mydlink app, tap then tap Add a Device. Tap Scan, then scan the Setup Code located on the device. Follow the app instructions to set up the additional DCH-S163 units with your DCH-S162 hub. 2020/12/02 Ver 1.00(CA)_65x55 Attention FCC:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IC This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage;
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
(3) Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf.