User Manual DWR-510 V0.1 (Draft) DWR-510 HSPA USB Dongle Router User Manual
- 1 -
User Manual DWR-510 V0.1 (Draft) I. Introduction iiii. Overview
. Overview
. Overview
. Overview DWR-510 HSPA USB Dongle Router is a highly integrated wireless solution for 3G and WiFi. The demands of data communication everywhere becomes more due to the great development of 3G HSPA system. DWR-510 adopts Qualcomm MSM6290 solution. It provides up to 7.2 Mbps HSDPA, up to 5.76 Mbps HSUPA, RX antenna diversity and wireless router etc. DWR-510 is fast, reliable and easy to operate. Therefore, user can experience the new features and surf the internet everywhere by DWR-510 dongle router. ii. Features HSUPA data rate up to 5.76 Mbps HSDPA data rate up to 7.2 Mbps UMTS PS domain data rate up to 384 kbps EDGE packet data rate up to 236.8 kbps GPRS packet data rate up to 115.2 kbps WiFi 802.11 b/g/n Share internet connection with 6 WiFi devices A slide switch to select between WiFi router mode and PC USB modem mode USB interface Multi-color LED indicating status of network connection Support Microsoft Windows XP / Vista / Windows 7 Support Linux (Router mode only) Support Mac OS (Router mode only) iii. Product Review Modem mode Modem mode provides the 3G access only from USB interface. User needs to set the slide switch to modem mode then device will operate in 3G USB modem mode. User needs to launch connection manager utility to access 3G data transaction.
- 2 -
User Manual DWR-510 V0.1 (Draft) Modem Mode Modem Mode Switch configuration Router Mode DWR-510 will become 3G / WiFi Router in this mode and can share 3G bandwidth to other devices that connect to DWR-510 by WiFi. DWR-510 allows up to 8 WiFi enabled devices to simultaneously connect to the Internet.
- 3 -
User Manual DWR-510 V0.1 (Draft) Router Mode It is recommended to choose this mode when there is no access point showed in your wireless network. Router Mode Switch configuration
- 4 -
User Manual DWR-510 V0.1 (Draft) II. Installation i. System Requirements Before you install DWR-510, please make sure your system meets the following requirements.
*Desktop or Laptop or applications with USB 1.1/2.0 port
*Minimum of 64MB system memory
*Operating system: XP/Vista/ Windows 7 ii. Hardware Installation 1. Find an available USB 1.1/2.0 port on your desktop or laptop or other applications. 2. Plug DWR-510 USB adapter into USB port of desktop or laptop or other applications. iii. Setup: Windows XP OS If your computer is running a Windows operating system, it will automatically detect the DWR-510 after device plug into the USB port, and OS displays a Found New Hardware window.
- 5 -
User Manual DWR-510 1. Find out the Driver, and launch the Hardware Wizard V0.1 (Draft) 2. Please click Yes, now and every time I connect a device circle, and Next> button.
- 6 -
User Manual DWR-510 3. Please click Install the software automatically (Recommended), and Next> button V0.1 (Draft) 4. The Hardware Wizard will automatically install the software
- 7 -
User Manual DWR-510 5. If you see the warning Windows Logo testing message, please click Continue Anyway V0.1 (Draft) 6. Please wait the software installation.
- 8 -
User Manual DWR-510 7. After the Completing the Found New Hardware Wizard windows appear, click Finish V0.1 (Draft) button.
- 9 -
User Manual DWR-510 V0.1 (Draft) III. Using i.i.i.i. ModemModemModemModem modemodemodemode Please push slide switch to Modem position to configure device to Modem mode. Device will only enable WWAN function in Modem mode, WiFi function will be disabled. Steps to use device in Modem mode:
1. Please double click D-Link HSUPA Connection Manager Icon to launch utility. 2. Please input PIN code
- 10 -
User Manual DWR-510 3. After found WWAN Network information and signal bar, please click connect icon to connect V0.1 (Draft) to WWAN network. 4. The Dial Up window will appear, please wait this process to finish. 5. Now, your computer is connecting to WWAN network. You can use internet browser and other internet utility to surf the network.
- 11 -
User Manual DWR-510 6. Menu List:
6.1 Setting V0.1 (Draft) 6.1.1 New 6.1.1.1 Contact Its used for the contact information management. New -> Contact
- 12 -
User Manual DWR-510 6.1.1.2 Message Its used to edit and send short message. New -> Message V0.1 (Draft) 6.1.1.3 Connection Profile Its used to select built-in APN or modify APN setting. New -> Connection Profile 6.1.2 Connect / Disconnect Its used to connect or disconnect to WWAN network.
- 13 -
User Manual DWR-510 6.1.3 Router Config 6.1.3.1 Wireless Setting Its used to modify WiFi setting, including wireless network name (SSID) and security option. Router Config -> Wireless Setting V0.1 (Draft) 6.1.3.2 Network Setting Its used to modify WiFi network setting, including IP and DHCP address. Router Config -> Network Setting
- 14 -
User Manual DWR-510 6.1.3.3 Advanced Its used to modify WiFi MAC filter setting. Router Config -> Advanced V0.1 (Draft) 6.1.3.4 Internet Its used to modify APN setting for Router mode using condition. Router Config -> Internet
- 15 -
User Manual DWR-510 6.1.3.5 Tools Its used to set password for the management web page in Router mode using condition. The default login name and password is admin Router Config -> Tools V0.1 (Draft) 6.2 Edit
- 16 -
User Manual DWR-510 6.2.1 Contact Its used to manage the contact information. V0.1 (Draft) 6.2.2 Message Its used to manage the short message information.
- 17 -
User Manual DWR-510 6.2.3 Connection Profile Its used to manage the connection profile in Modem mode using condition. V0.1 (Draft) 6.3 Tools 6.3.1 SIM Card Lock Its used to lock /unlock SIM card. 6.3.2 PIN Code Change Its used to change PIN code.
- 18 -
User Manual DWR-510 6.3.3 Network Mode Its used to configure the WWAN network to Auto or WCDMA only or GSM only. V0.1 (Draft) 6.4 Help 6.4.1 About
- 19 -
V0.1 (Draft) User Manual DWR-510 ii.ii.ii.ii. Router mode Router mode Router mode Router mode Please push slide switch to Router position to configure device to Router mode. Device will enable WWAN and WiFi router function in Router mode. Steps to use device in Router mode:
1. Push slide switch of device to Router position. 2. Enable WiFi function in your computer. 3. Turn on WiFi management tool in your computer, the default SSID of DWR-510 is DWR-510-dlnk. Please connect to it and you can start to surf the network. 4. Webpage for Router mode management 4.1 IP address to access management webpage The default IP address is http://192.168.0.1/
4.2 SETUP 4.2.1 INTERNET Its used to setup APN for 3G router.
- 20 -
User Manual DWR-510 4.2.2 WIRELESS SETTINGS Its used to set WiFi SSID, Country, Channel and Security Mode. V0.1 (Draft) 4.2.3 NETWORK SETTINGS Its used to set the IP address of the management webpage.
- 21 -
User Manual DWR-510 4.3 ADVANCED Its used to set the MAC filtering rules for Router mode using case. V0.1 (Draft) 4.4 TOOLS 4.4.1 ADMIN Its used to set the password for the management webpage. 4.4.2 SYSTEM Its used to restore the factory default setting.
- 22 -
User Manual DWR-510 V0.1 (Draft) 4.5 STATUS 4.5.1 DEVICE INFO Its used to show the device information.
- 23 -
User Manual DWR-510 4.5.2 WIRELESS Its used to show the WiFi MAC address. V0.1 (Draft) 4.6 SUPPORT Its the help information here.
- 24 -
V0.1 (Draft) User Manual DWR-510 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Connect the equipment into an outlet on a circuit different from that Increase the separation between the equipment and receiver. to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- 25 -
V0.1 (Draft) User Manual DWR-510 Products with 2.4GHz Wireless LAN Devices France L'utilisation de cet equipement (2.4GHz wireless LAN) est soumise certaines restrictions: cet equipement peut tre utilis l'interieur d'un batiment en utilisant toutes les frequences de 2400 a 2483.5MHz (Chaine 113). Pour une utilisation en environement exterieur, les frequences comprises entre 2400-2454 MHz (Chane 1-9) peuvent tre utilis. Pour les dernires restrictions, voir http://www.art-telecom.fr. For 2.4GHz wireless LAN operation of this product, certain restrictions apply. This equipment may use the entire2400MHz to 2483.5MHz frequency band (channels 1 through 13) for indoor applications. For outdoor use, only 2400-2454 MHz frequency band (channels 1-9) may be used. For the latest requirements, see http://www.art-telecom.fr. Wireless LAN Modules Maximum EIRP Frequency Ranges (MHz) 2400 MHz ~ 2446.5 MHz 2446.5 MHz ~ 2483.5 MHz Indoors 10mW 100mW Outdoors Not Permitted 100mW on private property with Ministry of Defense approval.
- 27 -
User Manual DWR-510 For Taiwan
V0.1 (Draft)
Note:
1. 2. :
CCXXXXYYyyyZzW
- 28 -