D-Link:
Version 0.1 . 03/2015 User Manual mydlink Wi-Fi Siren DCH-S220 Table of Contents Product Overview ........................................................ 3 Package Contents ................................................... 3 System Requirements ............................................. 4 Introduction .............................................................. 5 Features .................................................................. 6 Hardware Overview ................................................. 7 Connections ....................................................... 7 Side.................................................................... 8 Installation.................................................................... 9 Technical Specifications........................................... 10 Federal Communication Commission Interference Statement .............................................................. 11 D-Link DCH-S220 User 1 -
Package Contents mydlink Wi-Fi Siren (DCH-S220) D-Link DCH-S220 User 1 -
System Requirements Network Requirements IEEE 802.11b/g/n wireless router App-based Configuration Device Requirements Operating System:
Android 4 or above. iOS 7 or above D-Link DCH-S220 User 1 -
Introduction The mydlink Wi-Fi Siren is a wireless siren that makes your home safer. You can set an alarm via the mydlink Home app so when you're away, the mydlink Wi-Fi siren will be enabled and ready to receive signals from a trigger such as the mydlink Wi-Fi Motion Sensor (DCH-S150). When the siren is triggered, it will generate a 100dB (max) audio alarm for deterrence while pushing instant notifications to your mobile device, so you can stay updated from anywhere. D-Link DCH-S220 User 1 -
Features Compatible with 802.11b/g and 802.11n Devices - The DCH-S220 is still fully compatible with the 802.11b/g/n standards. WPS PBC - (Wi-Fi Protected Setup Push Button Configuration) Push Button Configuration is a button that can be pressed to add the device to an existing network or to create a new network. A virtual button can be used on the utility while a physical button is placed on the side of the device. This easy setup method allows you to form a secured wireless link between the DCH-S220 and another WPS enabled device. A PC is no longer needed to log into the Web-based interface. User-friendly Setup Wizard - Through its easy-to-use App-based which iOS or Android system user you can configure your access point to your specific settings within minutes. D-Link DCH-S220 User 1 -
Hardware Overview Connections D-Link DCH-S220 User 1 -
Hardware Overview Side System status LED Reset button WPS button D-Link DCH-S220 User Section 2 - Installation Installation Connecting the Wi-Fi water Sensor It is easy to connect the D C H - S 2 2 0 s i m p l y by performing the following instructions:
1. Plug the DCH-S220 into the wall outlet/socket, then follow App user guide. D-Link DCH-S220 User 9 D-Link DCH-S220 User 10 Appendix C -
Technical Specifications DEVICE INTERFACES 802.11n WLAN (AP wireless connection to computers) Common connect button Reset button WIRELESS LAN 802.11b/g standards 802.11n standard Wireless speed: up to 300 Mbps (802.11n) 64/128-bit WEP data encryption WPA/WPA2 (Wi-Fi Protected Access) ADVANCED FEATURES IPv6 support OPERATION MODES AP 2.4 GHz DIMENSIONS 65mm x 65mm x 52.7mm WEIGHT 105g MAXIMUM POWER CONSUMPTION AC: 3 watts TEMPERATURE Operating: 0 to 45 C (32 to 117 F) Storage: -20 to 65 C (-4 to 149 F) HUMIDITY Operating: 10% to 90% non-condensing Storage: 5% to 95% non-condensing CERTIFICATIONS FCC IC UL 1. Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. 2. Range varies depending on countrys regulation. 3. Do not use for Live & Security, Remote Control, or Energy Management D-Link DCH-S220 User 11 Appendix C -
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
-
-
-
-
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. D-Link DCH-S220 User 12 Appendix C -
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 dIndustrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Declaration dexposition aux radiations:Cet equipement est conforme aux limites dexposition aux rayonnements IC etablies pour un environnement non controle. Cet equipement doit etre installe et utilise avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. D-Link DCH-S220 User 13