all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
user manual | Users Manual | 4.29 MiB | ||||
1 | Test Report | |||||||
1 | Internal Photos | |||||||
1 | Cover Letter(s) | |||||||
1 | ID Label/Location Info | |||||||
1 | ID Label/Location Info | |||||||
1 | RF Exposure Info | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Test Report | |||||||
1 | External Photos | |||||||
1 | Test Setup Photos |
1 | user manual | Users Manual | 4.29 MiB |
Version 1.0 | 01/15/2013 User Manual Wireless AC1200 Dual-Band Gigabit Cloud Router USB 3.0 DIR-860L Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision 1.0 Date Description January 15, 2013
Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Copyright 2013 by D-Link Corporation. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation. D-Link DIR-860L User Manual i Table of Contents Table of Contents Preface ................................................................................. i Manual Revisions ........................................................................... i Trademarks ...................................................................................... i Product Overview ..............................................................1 Package Contents ......................................................................... 1 System Requirements ................................................................. 2 Introduction ................................................................................... 3 Features ............................................................................................ 4 Hardware Overview ..................................................................... 5 Connections ........................................................................... 5 LEDs ........................................................................................... 6 Installation .........................................................................7 Before you Begin ........................................................................... 7 Wireless Installation Considerations ...................................... 8 Manual Setup ................................................................................. 9 Configuration ...................................................................11 D-Link Quick Setup Wizard .....................................................12 QRS Mobile App (iOS, Android) .............................................19 SharePort Mobile App (iOS, Android) .................................20 Web-based Configuration Utility ..........................................24 Internet Connection Setup .............................................25 Static IP ..............................................................................26 Dynamic IP (DHCP) ........................................................27 PPPoE (Username/Password) ....................................28 PPTP ....................................................................................30 L2TP ....................................................................................31 DS-Lite ...............................................................................33 Wireless Settings .................................................................34 Wireless Connection Setup Wizard..........................35 Add Wireless Device with WPS Wizard ...................38 Manual Wireless Settings .................................................40 802.11ac draft (2.4GHz) ...............................................40 802.11ac draft (5GHz) ...................................................41 Network Settings ................................................................42 Router Settings ...............................................................43 DHCP Server Settings ...................................................44 DHCP Reservation .........................................................45 Storage ...................................................................................46 Media Server.........................................................................47 IPv6 ..........................................................................................48 IPv6 Internet Connection Setup Wizard ................49 Manual IPv6 Local Connectivity Setup ..................54 IPv6 Manual Setup.........................................................55 mydlink Settings .................................................................66 Advanced ......................................................................................67 Virtual Server ........................................................................67 Port Forwarding ..................................................................68 Application Rules ................................................................69 QoS Engine............................................................................70 Network Filters .....................................................................72 Access Control .....................................................................73 Website Filters ......................................................................76 D-Link DIR-860L User Manual ii Table of Contents Inbound Filter ......................................................................77 Firewall Settings ..................................................................78 Routing ...................................................................................80 Advanced Wireless .............................................................81 Wi-Fi Protected Setup .......................................................82 Advanced Network ............................................................84 Guest Zone ............................................................................85 IPv6 Firewall ..........................................................................86 IPv6 Routing .........................................................................87 Tools ................................................................................................88 Admin .....................................................................................88 Time .........................................................................................89 SysLog .....................................................................................90 Email Settings ......................................................................91 System ....................................................................................92 Firmware ................................................................................93 Firmware Upgrade .........................................................93 Language Pack ................................................................93 Dynamic DNS .......................................................................94 System Check .......................................................................95 Schedules ..............................................................................96 Status ..............................................................................................97 Device Info ............................................................................97 Logs .........................................................................................98 Statistics .................................................................................99 Internet Sessions .............................................................. 100 Wireless ............................................................................... 101 Routing ................................................................................ 102 IPv6 ....................................................................................... 103 IPv6 Routing ...................................................................... 104 Support ....................................................................................... 105 Connect a Wireless Client to your Router ....................106 WPS Button ................................................................................ 106 Windows 7 ................................................................................ 107 WPA/WPA2 ......................................................................... 107 WPS ....................................................................................... 110 Windows Vista ......................................................................... 114 WPA/WPA2 ......................................................................... 115 WPS/WCN 2.0 .................................................................... 117 Windows XP ............................................................................. 118 WPA/WPA2 ......................................................................... 119 Troubleshooting ............................................................121 Wireless Basics ...............................................................125 What is Wireless? ...................................................................... 126 Tips ................................................................................................ 128 Wireless Modes ......................................................................... 129 Networking Basics .........................................................130 Check your IP address ............................................................ 130 Statically Assign an IP address ............................................ 131 Wireless Security ......................................................... 132 What is WPA? ................................................................ 132 Technical Specifications ................................................133 D-Link DIR-860L User Manual iii Section 1 - Product Overview Product Overview Package Contents DIR-860L Wireless AC1200 Dual-Band Gigabit Cloud Router USB 3.0 Ethernet Cable Power Adapter Wi-Fi Configuration Note Wi-Fi Configuration Note If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-860L will cause damage and void the warranty for this product. D-Link DIR-860L User Manual 1 Section 1 - Product Overview System Requirements Network Requirements
port Computer with the following:
Web-based Configuration Utility Requirements Browser Requirements:
mydlink Requirements Windows Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version.
iPhone, iPad, and iPod touch are registered trademarks of Apple Inc. Android is a trademark of Google, Inc. D-Link DIR-860L User Manual 2 Section 1 - Product Overview Introduction The D-Link Wireless AC1200 Dual-Band Gigabit Cloud Router USB 3.0 (DIR-860L) comes equipped with four Gigabit ports to provide speeds up to 10x faster than standard 10/100 ports. It also uses 802.11ac (draft) technology with multiple intelligent antennas to maximize the speed and range of your wireless signal and significantly outperform 802.11n devices. With the addition of Intelligent Quality of Service (QoS), data streams are separated, helping to organize and prioritize your network traffic so that your video streaming, gaming, and VoIP calls run smoother over both your wired and wireless network. The DIR-860L supports a host of cloud features including QRS Mobile, which allows you to set up and configure the router using a mobile app. You can set up your router right from your sofa, no PC required. The Wireless AC1200 Dual-Band Gigabit Cloud Router USB 3.0 is also mydlink-enabled, which gives you access to your home network no matter where you are. Now you can monitor and manage your home network right from your laptop, iPhone, iPad, or Android device. mydlink-enabled routers can be configured to send an email to keep you informed anywhere, anytime when new devices are connecting to your network or unwanted access is detected. Monitor in real-time websites that are being visited with recent browser history displayed on the mydlink Lite app great for parents. SharePort Mobile technology lets you take advantage of the USB 3.0 port found on the back of your DIR-860L. Plug in a USB storage drive and you can use the SharePort Mobile app for iOS and Android to access files, stream videos, view photos, or listen to music on your laptop or mobile devices. Plug in a printer and you can use the SharePort Mobile Plus app to share that printer with all of your devices. The DIR-860L Wireless AC1200 Dual-Band Gigabit Cloud Router USB 3.0 provides incredible speeds, smart antenna technology, fast ports, cloud features, and terrific security features. It also features an innovative design and easy installation options. D-Link DIR-860L User Manual 3 Section 1 - Product Overview Features
- The DIR-860L can provide up to a full 1750Mbps* wireless connection with concurrent 801.11ac and 802.11n wireless clients . It also operates on both the 2.4 GHz and 5 GHz bands, to allow separation of traffic so users can participate in high-bandwidth activities, such as video streaming, online gaming, and real-time audio, without affecting low-priority traffic like email and web surfing.
- The DIR-860L support the QRS Mobile app to setup the router using a mobile device. It is also mydlink-enabled so you can remotely access and mange your DIR-860L from a mobile device. SharePort Mobile can be used to share files, stream videos, view photos, and play music. SharePort Plus lets you share a printer.
- The DIR-860L is still fully compatible with the 802.11n, IEEE 802.11g and 802.11a standards, so it can connect with existing 802.11n, 802.11g, 802.11b, and 802.11a wireless devices.
- The Web-based user interface displays a number of advanced network
Content Filtering - Easily applied content filtering based on MAC Address, URL, and/or Domain Name.
Filter Scheduling - These filters can be scheduled to be active on certain days or for a duration of hours or minutes.
- The DIR-860L can pass through VPN sessions. It supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-860L can securely access corporate networks.
- Through its easy-to-use Web-based user interface, the DIR-860L lets you control what information is accessible to those on the wireless network, whether from the Internet or from your companys server. Configure your router to your specific settings within minutes.
* Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11b, 802.11g, 802.11n, and draft 802.11ac specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link DIR-860L User Manual 4 Section 1 - Product Overview Hardware Overview Connections 1 4 6 2 3 5 7 1 USB 3.0 Port 2 WPS Button 3 Gigabit LAN Ports (1-4) 4 Gigabit Internet Port 5 6 7 Power Button Power Receptor Reset Button Connect a USB flash drive to share content , or connect it to a USB printer to share it on your network. Press to start the WPS process and automatically create a secure connection to a WPS client. Connect Ethernet devices such as computers, switches, storage (NAS) devices and game consoles. Using an Ethernet cable, connect your broadband modem to this port. Press the power button to power on and off. Receptor for the supplied power adapter. Insert a paperclip in to the hole and hold for several seconds to reset the router to default settings. D-Link DIR-860L User Manual 5 Section 1 - Product Overview Hardware Overview LEDs 1 2 1 2 Power LED Internet LED A solid green light indicates a proper connection to the power supply. The light will blink green during the WPS process. The light will be a solid orange during boot up. A solid light indicates connection on the Internet port. If the LED is orange, the connection is good but the router cannot connect to the Internet. D-Link DIR-860L User Manual 6 Section 2 - Installation Installation This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet or cabinet, or in an attic or garage. Before you Begin
then you must turn off your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet).
Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet. D-Link DIR-860L User Manual 7 Section 2 - Installation Wireless Installation Considerations The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum -
each wall or ceiling can reduce your devices range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. 2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it appears over 42 feet (14 meters) thick!
Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3. Building Materials make a difference. A solid `metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal. 4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise. 5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone is in not in use. D-Link DIR-860L User Manual 8 Section 2 - Installation 1. Turn off and unplug your cable or DSL broadband modem. This is required. Manual Setup Modem 2. Position your router close to your modem and a computer. Place the router in an open area of your intended work area for better wireless coverage. 3. Unplug the Ethernet cable from your modem (or existing router if upgrading) that is connected to your computer. Plug it into the LAN port labeled 1 on the back of your router. The router is now connected to your computer. 4 Computer DIR-860L D-Link DIR-860L User Manual 9 Section 2 - Installation 4. Plug one end of the included Ethernet cable that came with your router into the yellow port labeled INTERNET on the back of the router. Plug the other end of this cable into the Ethernet port on your modem. DIR-860L Modem Computer 5. Reconnect the power adapter to your cable or DSL broadband modem and wait for two minutes. 6. Connect the supplied power adapter into the power receptor on the back of the router and then plug it into a power outlet or surge protector. Press the power button and verify that the power LED is lit. Allow 1 minute for the router to boot up. DIR-860L Modem 1 Computer 7. If you are connecting to a Broadband service, you may be online already and further configuration will be optional. D-Link DIR-860L User Manual 10 Section 2 - Installation Configuration
- This wizard will launch when you log into the router for the first time. Refer to page 12.
- Use your iPhone, iPad, or iPod Touch to configure your router. Refer to page 19.
Manual Setup - Log into the router and manually configure your router (advanced users only). Refer to pagepage 26. D-Link DIR-860L User Manual 11 Section 3 - Configuration D-Link Quick Setup Wizard If this is your first time installing the router, open your web browser. You will automatically be directed to the Wizard Setup Screen. If the wizard does not open automatically, you can alternatively reach the configuration utility by entering http://dlinkrouter.local. or the IP address of the router (). Please refer to page 24. This wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Click Next to continue. Please wait while your router detects your internet connection type. If the router detects your Internet connection, you may need to enter your ISP information such as username and password. D-Link DIR-860L User Manual 12 Section 3 - Configuration If the router does not detect a valid Ethernet connection from the Internet port, this screen will appear. Connect your broadband modem to the Internet port and then click . If the router detects an Ethernet connection but does not detect the type of Internet connection you have, this screen will appear. Click Guide me through the Internet Connection Settings to display a list of connection types to choose from. Select your Internet connection type and click Next to continue. D-Link DIR-860L User Manual 13 Section 3 - Configuration If the router detected or you selected PPPoE, enter your PPPoE username and password and click Next to continue. Note: Make sure to remove any PPPoE software from your computer. The software is no longer needed and will not work through a router. If the router detected or you selected PPTP, enter your PPTP username, password, and other information supplied by your ISP. Click Next to continue. If the router detected or you selected L2TP, enter your L2TP username, password, and other information supplied by your ISP. Click Next to continue. D-Link DIR-860L User Manual 14 Section 3 - Configuration If the router detected or you selected Static, enter the IP and DNS settings supplied by your ISP. Click Next to continue. For both the 2.4GHz and 5GHz segments, create a Wi-Fi network name
(SSID) using up to 32 characters. Create a Wi-Fi password (between 8-63 characters). Your wireless clients will need to have this passphrase or key entered to be able to connect to your wireless network. Click Next to continue. In order to secure your router, please enter a new password to use when accessing the web-based configuration utility (where the password field was previously left blank). Check the box to enable CAPTCHA authentication for added security. Be sure to make a record of this password for future use. Click Next to continue. D-Link DIR-860L User Manual 15 Section 3 - Configuration Select your time zone from the drop-down menu and click Next to continue. The Setup Complete window will display your Wi-Fi settings. Click Save and Connect to continue. If you want to create a bookmark to the router, click OK. Click Cancel if you do not want to create a bookmark. If you clicked Yes, a window may appear (depending on what web browser you are using) to create a bookmark. D-Link DIR-860L User Manual 16 Section 2 - Installation To use the mydlink service (mydlink.com or the mydlink Lite app), you must have an account. Select if you do have a mydlink account or if you need to create one. Click Next to continue. If you do not want to register at this time, click Cancel. If you selected Yes, enter your mydlink account name (email address) and password. Click Login to register your router. If you selected No, fill out the requested information and click Next to create your mydlink account. D-Link DIR-860L User Manual 17 Section 3 - Configuration The mydlink App will allow you to receive notices, browse network users, and configure your router from an iPhone/iPad/iPod Touch
(iOS 3.0 or higher), or Android device (1.6 or higher). To download the "mydlink Lite" app, visit the App Store, Google Play, or . PC and Mac users can use the mydlink portal at . D-Link DIR-860L User Manual 18 Section 3 - Configuration QRS Mobile App (iOS, Android) D-Link offers an app for your iOS or Android device to install and configure your router. Step 1 From an iOS device, go to the App Store. From an Android device go to Google Play. Search for D-Link, select QRS Mobile, and download the app to your device. You may also scan the appropriate code on the right to locate the app download page. iOS Android Step 2 Once your app is installed, you may now configure your router. Connect to the router wirelessly by going to your wireless utility on your device. Scan for the Wi-Fi name (SSID) as listed on the supplied info card. Select and then enter your Wi-Fi password. Step 3 Once you connect to the router, launch the QRS mobile app and it will guide you through the installation of your router. D-Link DIR-860L User Manual 19 Section 3 - Configuration SharePort Mobile App (iOS, Android) The SharePort Mobile app will allow you to access files from a USB storage drive that is plugged into your router. You must enable file sharing from the Setup > Storage page (refer to page 22) for this app to work properly. 1. Plug your USB storage drive into the USB port. Note: The DIR-860L supports hard drives with up to one terabyte of storage capacity. USB port 2. Use your iOS or Android mobile device to scan the QR code to the right to download the SharePort Mobile app. You can also search for the SharePort Mobile app directly in the iOS App Store or Google Play. iOS Android 3. From your iOS or Android mobile device, choose Settings. Note: These steps are for the iOS version of the app. The Android version may differ slightly. D-Link DIR-860L User Manual Settings 20 Section 3 - Configuration 4. Click Wi-Fi, select the Wi-Fi Network Name (SSID) that you created during setup and then enter the default Wi-Fi password located on your Wi-Fi configuration note. 5. Once connected, tap on the SharePort Mobile icon. 6. The following screen will appear. D-Link DIR-860L User Manual 21 Section 3 - Configuration 7. Tap on the Settings icon located on the right top corner of the screen. Tap Edit to enter your User Name and Password (the default username is admin and the password field should be left blank). Once you finish, click Done to continue. 8. For the Movie section, click the movie icon to play your movie from your USB flash drive. 9. For the Music section, click the music icon to play your music from your USB flash drive. D-Link DIR-860L User Manual 22 Section 3 - Configuration 10. For the Photo section, click the Photo icon to view your photos from your USB flash drive. 11. For the Files section, click on the Files icon to view your files from your USB flash drive. 12. For the Folder section, click the folder icon to view your folders from your USB flash drive. D-Link DIR-860L User Manual 23 Section 3 - Configuration Web-based Configuration Utility To access the configuration utility, open a web-browser such as Internet Explorer and enter Users may also connect by typing the IP address of the router
() in the address bar. Enter your password. The password should be left blank by default. D-Link DIR-860L User Manual 24 Section 3 - Configuration Internet Connection Setup If you want to configure your router to connect to the Internet using the wizard, click . You will be directed to the Quick Setup Wizard. Please refer to page 12. Click Manual Internet Connection Setup to configure your connection manually and continue to the next page. D-Link DIR-860L User Manual 25 Section 3 - Configuration Manual Internet Setup Static IP Select your connection type from the My Internet Connect Is drop-down box. Choose Static IP if all of the necessary IP information has been provided by your ISP. You will need to enter the IP address, subnet mask, gateway address, and DNS address(es). Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format. My Internet Connection Is:
Enable Advanced DNS Service:
Enable True Gigabit Routing Connectivity:
Select Static IP to manually enter the IP settings supplied by your ISP. Advanced Domain Name System (DNS) services enhances your Internet performance by getting you the information and web pages you are looking for faster and more reliably. In addition, it improves your overall Internet experience by correcting many common typing mistakes automatically, taking you where you intended to go and saving you valuable time. Check to enable true Gigabit routing. This will increase the throughput of the WAN-LAN connectivity of the router. IP Address:
Enter the IP address assigned by your ISP. Subnet Mask:
Enter the Subnet Mask assigned by your ISP. Default Gateway:
Enter the Gateway assigned by your ISP. DNS Servers:
The DNS server information will be supplied by your ISP MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU. MAC Address:
The default MAC Address is set to the Internet ports physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the button to replace the Internet ports MAC address with the MAC address of your Ethernet card. D-Link DIR-860L User Manual 26 Section 3 - Configuration If you are unsure what method you use to connect to the Internet, try this first. Cable modems usually use this type of connection Dynamic IP (DHCP) My Internet Connection:
Select Dynamic IP (DHCP) to obtain IP Address information automatically from your ISP. Select this option if your ISP does not give you any IP numbers to use. This option is commonly used for cable modem services. Enable Advanced DNS Service:
Advanced Domain Name System (DNS) services enhances your Internet performance by getting you the information and web pages you are looking for faster and more reliably. In addition, it improves your overall Internet experience by correcting many common typing mistakes automatically, taking you where you intended to go and saving you valuable time. Disclaimer functionality and operation of the Advanced DNS service or its features. Check to enable true Gigabit routing. This will increase the throughput of the WAN-LAN connectivity of the router. Enable True Gigabit Routing Connectivity:
Host Name:
The Host Name is optional but may be required by some ISPs. Leave blank if you are not sure. Use Unicasting:
Check the box if you are having problems obtaining an IP address from your ISP. Primary/Secondary DNS Server:
Enter the Primary and secondary DNS server IP addresses assigned by your ISP. These addresses are usually obtained automatically from your ISP. Leave at 0.0.0.0 if you did not specifically receive these from your ISP. MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU. MAC Address:
The default MAC Address is set to the Internet ports physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the button to replace the Internet ports MAC address with the MAC address of your Ethernet card. D-Link DIR-860L User Manual 27 Section 3 - Configuration Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Make sure to remove any PPPoE software from your computer. The software is not needed and will not work through a router. PPPoE (Username/Password) My Internet Connection:
Enable Advanced DNS Service:
Enable True Gigabit Routing Connectivity:
Address Mode:
IP Address:
User Name:
Password:
Service Name:
Reconnect Mode:
Select from the drop-down menu. Advanced Domain Name System (DNS) services enhances your Internet performance by getting you the information and web pages you are looking for faster and more reliably. In addition, it improves your overall Internet experience by correcting many common typing mistakes automatically, taking you where you intended to go and saving you valuable time. Disclaimer functionality and operation of the Advanced DNS service or its features. Check to enable true Gigabit routing. This will increase the throughput of the WAN-LAN connectivity of the router. Select Static IP if your ISP assigned you IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic. Enter the IP address (Static PPPoE only). Enter your PPPoE user name. Enter your PPPoE password and then retype the password in the next box. Enter the ISP Service Name (optional). Select either , On-Demand, or Manual. D-Link DIR-860L User Manual 28 Section 3 - Configuration Maximum Idle Time:
DNS Addresses:
MTU:
MAC Address:
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. Enter the Primary and Secondary DNS Server Addresses (Static PPPoE only). Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU. The default MAC Address is set to the Internet ports physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the button to replace the Internet ports MAC address with the MAC address of your Ethernet card. D-Link DIR-860L User Manual 29 Section 3 - Configuration PPTP Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. My Internet Connection:
Enable Advanced DNS Service:
Enable True Gigabit Routing Connectivity:
Address Mode:
PPTP IP Address:
PPTP Subnet Mask:
PPTP Gateway:
Select from the drop-down menu. Advanced Domain Name System (DNS) services enhances your Internet performance by getting you the information and web pages you are looking for faster and more reliably. In addition, it improves your overall Internet experience by correcting many common typing mistakes automatically, taking you where you intended to go and saving you valuable time. Disclaimer functionality and operation of the Advanced DNS service or its features. Check to enable true Gigabit routing. This will increase the throughput of the WAN-LAN connectivity of the router. Select Static if your ISP assigned you an IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic. Enter the IP address (Static PPTP only). Enter the Primary and Secondary DNS Server Addresses (Static PPTP only). PPTP Server IP:
Enter the Gateway IP Address provided by your ISP. Username:
Enter the Server IP provided by your ISP (optional). Password:
Enter your PPTP username. Reconnect Mode:
Enter your PPTP password and then retype the password in the next box. D-Link DIR-860L User Manual 30 Section 3 - Configuration L2TP Choose L2TP (Layer 2 Tunneling Protocol ) if your ISP uses a L2TP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. My Internet Connection:
Enable Advanced DNS Service:
Enable True Gigabit Routing Connectivity:
Address Mode:
Select from the drop-down menu. Advanced Domain Name System (DNS) services enhances your Internet performance by getting you the information and web pages you are looking for faster and more reliably. In addition, it improves your overall Internet experience by correcting many common typing mistakes automatically, taking you where you intended to go and saving you valuable time. Disclaimer functionality and operation of the Advanced DNS service or its features. Check to enable true Gigabit routing. This will increase the throughput of the WAN-LAN connectivity of the router. Select Static if your ISP assigned you an IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic. PPTP IP Address:
Enter the IP address (Static PPTP only). PPTP Subnet Mask:
Enter the Primary and Secondary DNS Server Addresses (Static PPTP only). PPTP Gateway:
Enter the Gateway IP Address provided by your ISP. PPTP Server IP:
Enter the Server IP provided by your ISP (optional). Username:
Enter your PPTP username. Password:
Enter your PPTP password and then retype the password in the next box. Reconnect Mode:
Select either , On-Demand, or Manual. D-Link DIR-860L User Manual 31 Section 3 - Configuration Maximum Idle Time:
DNS Servers:
Select either , On-Demand, or Manual. Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. MTU:
The DNS server information will be supplied by your ISP. MAC Address:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default MTU. The default MAC Address is set to the Internet ports physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the button to replace the Internet ports MAC address with the MAC address of your Ethernet card. D-Link DIR-860L User Manual 32 Section 3 - Configuration
DS-Lite DS-Lite Configuration:
Select the DS-Lite DHCPv6 option to let the router allocate the AFTR IPv6 address automatically. Select the Manual Configuration to enter the AFTR IPv6 address in manually. AFTR IPv6 Address:
After selecting the Manual Configuration option above, enter the AFTR IPv6 address used here. B4 IPv4 Address:
Enter the B4 IPv4 address value used here. WAN IPv6 Address:
Once connected, the WAN IPv6 address will be displayed here. IPv6 WAN Default Gateway:
Once connected, the IPv6 WAN Default Gateway address will be displayed here. D-Link DIR-860L User Manual 33 Section 3 - Configuration Wireless Settings If you want to configure the wireless settings on your router using the wizard, click and refer to page 42. Click if you want to add a wireless device using Wi-Fi Protected Setup (WPS) and refer to page 44. If you want to manually configure the wireless settings on your router click Manual Wireless Network Setup and refer to the next page. D-Link DIR-860L User Manual 34 Section 4 - Security Wireless Connection Setup Wizard To run the security wizard, click on Setup at the top and then click Wireless
. STEP 1: Type your desired wireless network names (SSIDs) for both the 2.4 GHz band and the 5 GHz band.
Select this option to automatically generate the routers network key (password) and click Next. Manually: Select this option to manually enter your network key and click Next. D-Link DIR-860L User Manual 35 Section 4 - Security If you selected , the wizard will generate a pre-shared key
(password). The password will be the same for both the 2.4GHz and 5GHz bands. Click Next. You will now see a summary window that displays your settings. Write down the password and use it to access your wireless networks. Click Save to save your settings. D-Link DIR-860L User Manual 36 Section 4 - Security If you selected Manually, the option to make your password the same on both bands will be offered. Enter your wireless password in the box below. If you chose to have different passwords for each band, you will need to enter a separate password for each band. Click Next. You will now see a summary window that displays your settings. Write down the password and use it to access your wireless networks. Click Save to save your settings. D-Link DIR-860L User Manual 37 Section 4 - Security If you are unfamiliar with the types of wireless security, more information is located in the appendix at back of this manual. Add Wireless Device with WPS Wizard From the Setup > Wireless Settings screen, click WPS. Select to add a wireless client using WPS (Wi-Fi Protected Setup) and then click Next. Skip to the next page. If you select Manual, a settings summary screen will appear. Write down the security key and use this to access your wireless networks. Click OK to finish. D-Link DIR-860L User Manual 38 Section 4 - Security PIN: Select this option to use PIN method. In order to use this method you must know the wireless clients 8 digit PIN and click Connect. PBC: Select this option to use PBC (Push Button) method to add a wireless client. Click Connect. Once you click Connect, you will have a 120 second time limit to apply the settings to your wireless client(s) and successfully establish a connection. D-Link DIR-860L User Manual 39 Section 3 - Configuration Manual Wireless Settings 802.11ac draft (2.4GHz) If you are unfamiliar with the types of wireless security, more information is located in the appendix at back of this manual. Enable Wireless:
Check the box to enable the wireless function. If you do not want to use wireless, uncheck the box to disable all the wireless functions. Schedule:
Select the time frame that you would like your wireless network enabled. The schedule may be set to . Any schedule you create will be available in the drop-down menu. Click New Schedule to create a schedule. Wireless Network Name:
Service Set Identifier (SSID) is the name of your wireless network. Create a name for your wireless network using up to 32 characters. The SSID is case-sensitive. 802.11 Mode:
- Select if you are using both 802.11ac, 802.11 n, and 802.11a wireless clients.
Select if you are using both 802.11 ac and 802.11 n wireless clients.
- Select if you are using both 802.11n and 802.11a wireless clients.
- Select only if all of your wireless clients are 802.11ac.
- Select only if all of your wireless clients are 802.11n. Enable Auto Channel Scan:
Wireless Channel:
Channel Width:
The setting can be selected to allow the DIR-860L to choose the channel with the least amount of interference. Indicates the channel setting for the DIR-860L. By default the channel is set to 6. The Channel can be changed to fit the channel setting for an existing wireless network or to customize the wireless network. If you enable , this option will be greyed out.
- This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.
- Select if you are not using any 802.11n wireless clients. Visibility Status:
Select Invisible if you do not want the SSID of your wireless network to be broadcast by the DIR-860L. If Invisible is selected, the SSID of the DIR-860L will not be seen by site survey utilities so your wireless clients will have to know the SSID of your DIR-860L in order to connect to it. Wireless Security:
Refer to the appendix in the back of the manual for more information regarding wireless security. D-Link DIR-860L User Manual 40 Section 3 - Configuration 802.11ac draft (5GHz) Enable Wireless:
Check the box to enable the wireless function. If you do not want to use wireless, uncheck the box to disable all the wireless functions. Schedule:
Select the time frame that you would like your wireless network enabled. The schedule may be set to . Any schedule you create will be available in the drop-down menu. Click New Schedule to create a schedule. Wireless Network Name:
Service Set Identifier (SSID) is the name of your wireless network. Create a name for your wireless network using up to 32 characters. The SSID is case-sensitive. 802.11 Mode:
- Select only if all of your wireless clients are 802.11n.
- Select if all of your wireless clients are 802.11ac.
- Select if you are using both 802.11n and 802.11a wireless clients.
- Select if you are using both 802.11ac and 802.11n wireless clients.
- Select if you are using both 802.11ac and 802.11a wireless clients. Enable Auto Channel Scan:
Wireless Channel:
Channel Width:
The setting can be selected to allow the DIR-860L to choose the channel with the least amount of interference. Indicates the channel setting for the DIR-860L. By default the channel is set to 6. The Channel can be changed to fit the channel setting for an existing wireless network or to customize the wireless network. If you enable , this option will be greyed out.
- Select if you are using both 802.11ac, 802.11n and non-802.11n wireless devices.
- This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.
- Select if you are not using any 802.11n wireless clients. Visibility Status:
Select Invisible if you do not want the SSID of your wireless network to be broadcast by the DIR-860L. If Invisible is selected, the SSID of the DIR-860L will not be seen by site survey utilities so your wireless clients will have to know the SSID of your DIR-860L in order to connect to it. Wireless Security:
Refer to the next page for more information regarding wireless security. D-Link DIR-860L User Manual 41 Section 3 - Configuration This section will allow you to change the local network settings of the router and to configure the DHCP settings. Network Settings D-Link DIR-860L User Manual 42 Section 3 - Configuration Router Settings This section will allow you to configure the router settings. Router IP Address:
Enter the IP address of the router. The default IP address is 192.168.0.1. If you change the IP address, once you click Save Settings, you will need to enter the new IP address in your browser in order to log in to the configuration utility in the future. Subnet Mask:
Enter the Subnet Mask. The default subnet mask is 255.255.255.0. Device Name:
Enter a name for the router. Local Domain:
Enter the Domain name (Optional). Enable DNS Relay:
Uncheck the box to transfer the DNS server information from your ISP to your computers. If checked, your computers will use the router for a DNS server. D-Link DIR-860L User Manual 43 Section 3 - Configuration DHCP Server Settings DHCP stands for Dynamic Host Control Protocol. The DIR-860L has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to Obtain an IP Address Automatically. When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the DIR-860L. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool. Enable DHCP Server:
Check this box to enable the DHCP server on your router. Uncheck to disable this function. DHCP IP Address Range:
Enter the starting and ending IP addresses for the DHCP servers IP assignment range. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. DHCP Lease Time:
The length of time for the IP address lease. Enter the lease time in minutes. Always Broadcast:
Enable this feature to broadcast your networks DHCP server to LAN/
WLAN clients. NetBIOS Announcement:
NetBIOS allows LAN hosts to discover all other computers within the network, enable this feature to allow the DHCP Server to offer NetBIOS configuration settings. Learn NetBIOS from WAN:
NetBIOS Scope:
Enable this feature to allow WINS information to be learned from the WAN side, disable to allow manual configuration. This feature allows the configuration of a NetBIOS domain name under which network hosts operates. This setting has no effect if the Learn NetBIOS information from WAN is activated. NetBIOS Node:
Select the different type of NetBIOS node; Broadcast only, Point-to-Point, Mixed-mode, and Hybrid. WINS IP Address:
Enter your WINS Server IP address(es). D-Link DIR-860L User Manual 44 Section 3 - Configuration DHCP Reservation If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will assign the IP address only to that computer or device. Note: This IP address must be within the DHCP IP Address Range. Enable:
Check this box to enable the reservation. Computer Name:
Enter the computer name or select from the drop-down menu and click <<. IP Address:
Enter the IP address you want to assign to the computer or device. This IP Address must be within the DHCP IP Address Range. MAC Address:
Enter the MAC address of the computer or device. Copy Your PCs MAC Address:
If you want to assign an IP address to the computer you are currently on, click this button to populate the fields. Save:
Click Save to save your entry. You must click Save Settings at the top to activate your reservations. DHCP Reservations List DHCP Reservations List:
Displays any reservation entries. Displays the host name
(name of your computer or device), MAC Address, and IP address. Enable:
Check to enable the reservation. Edit:
Click the edit icon to make changes to the reservation entry. Delete:
Click to remove the reservation from the list. D-Link DIR-860L User Manual 45 Section 3 - Configuration Storage This page will allow you to set up access to files on an external USB hard drive1 or thumb drive that is plugged into the router. You can do this through local network or from the Internet using either a web browser or an app on your smartphone or tablet. You can create users that can be allowed access to these files through SharePort Mobile services accessible through a web UI or on mobile devices using the SharePort Mobile app available for iOS and Android. Enable SharePort Web Access Check this box if you wish to be able to access SharePort through a browser as well as the mobile app. HTTP Access Port:
Enter the port you want to use when accessing SharePort using a web browser. HTTPS Access Port:
Enter the port you want to use when accessing SharePort through a secure connection using a web browser. Allow Remote Access:
Check this box if you wish to be able to access SharePort through a web browser over the Internet. User Creation:
To give a new user access to your SharePort storage, enter a User Name and Password here. You can Add new users or choose existing users from the drop-down menu if you wish to Edit or Delete them. Note: The Admin password is the same as the admin password for the router. The Guest password is guest and cannot be changed. User List:
This list displays all of the users with access to the SharePort Mobile content, what they can access, and their Read/Write Permissions. Number of Devices:
All devices you have set up for SharePort access will be listed here. SharePort Web Access Link:
This area will display the HTTP and HTTPS links to connect to your SharePort drive through a web browser from a device on your network. D-Link DIR-860L User Manual 1 Supports capacities of up to 1TB for USB storage drives. 46 Section 3 - Configuration Media Server This page will allow you to enable a DLNA Media Server. DLNA (Digital Living Network Alliance) is the standard for the interoperability of Network Media Devices (NMDs). The user can enjoy multimedia applications (music, pictures and videos) on your network connected PC or media devices. If you agree to share media with devices, any computer or device that connects to your network can play your shared music, pictures and videos. Note: The shared media may not be secure. Allowing any devices to stream is recommended only on secure networks. DLNA Server:
Check to enable DLNA Media Server functions. DLNA Server Name:
Choose a name for your DLNA media server so that it can be found. Folder:
Choose the location of the folder you wish to share or check the box to use the root folder of the entire drive. iTunes Server:
Check to enable iTunes Server functions. Folder:
Choose the location of the iTunes Library folder you wish to share or check the box to use the root folder if it is located on the root folder of the connected drive. USB 3.0 Use this setting to enable USB 3.0 fuctionality for the USB port on the back of the router. USB 3.0 provides high-speed transfer speeds with compatible devices. This setting is disabled by default, which means that the USB port will operate at the USB 2.0 specification. D-Link DIR-860L User Manual 47 Section 3 - Configuration IPv6 On this page, you can configure the IPv6 Connection type. There are two ways to set up the IPv6 Internet connection. You can use the Web-based IPv6 Internet Connection Setup Wizard, or you can manually configure the connection. If you are a beginner who has not configured a router before, click on the IPv6 Internet
button and the router will guide you through a few simple steps to get your network up and running. If you are an advanced user who has configured a router before, click on the Manual IPv6 Internet Connection Setup button to input all the settings manually. D-Link DIR-860L User Manual 48 Section 3 - Configuration IPv6 Internet Connection Setup Wizard On this page, the you can configure the IPv6 Connection type using the IPv6 Internet Connection Setup Wizard. Click the button and the router will guide you through a few simple steps to get your network up and running. Click Next to continue to the next page. Click Cancel to discard the changes made and return to the main page. The router will attempt to detect whether it is possible to obtain the IPv6 Internet connection type automatically. If this succeeds then you will be guided through the input of the appropriate parameters for the connection type found. D-Link DIR-860L User Manual 49 Section 3 - Configuration However, if the automatic detection fails, you will be prompt to either Try again or to click on the Guide me through the IPv6 settings button to initiate the manual continuation of the wizard. There are several connection types to choose from. If you are unsure of your connection method, please contact your IPv6 Internet Service Provider. Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or disabled. The 3 options available on this page are, and Tunneling Connection. Choose the required IPv6 Internet Connection type and click on the Next button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page. Click on the Next button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page. D-Link DIR-860L User Manual 50 Section 3 - Configuration IPv6 over PPPoE After selecting the IPv6 over PPPoE option, you will be able to configure the IPv6 Internet connection that requires a username and password to get online. Most DSL modems use this type of connection.
PPPoE Session: Select the PPPoE Session value used here. This option will state that this connection shares its information with the already configured IPv6 PPPoE connection, or the user can create a new PPPoE connection here. User Name: Enter the PPPoE username used here. If you do not know your user name, please contact your ISP. Password: Enter the PPPoE password used here. If you do not know your password, please contact your ISP. Verify Password: Re-enter the PPPoE password used here. Service Name: Enter the service name for this connection here. This option is optional. D-Link DIR-860L User Manual 51 Section 3 - Configuration
This mode is used when your ISP provides you with a set IPv6 addresses that does not change. The IPv6 information is manually entered in your IPv6 configuration settings. You must enter the IPv6 address, Subnet Prefix Length, Default Gateway, Primary DNS Server, and Secondary DNS Server. Your ISP provides you with all of this information. Use Link-Local Address:
is used by nodes and routers when The Link-local address communicating with neighboring nodes on the same link. This mode enables IPv6-capable devices to communicate with each other on the LAN side. IPv6 Address:
Enter the WAN IPv6 address for the router here. Subnet Prefix Length:
Enter the WAN subnet prefix length value used here. Default Gateway:
Enter the WAN default gateway IPv6 address used here. Primary DNS Address:
Secondary DNS Address:
Enter the WAN primary DNS Server address used here. Enter the WAN secondary DNS Server address used here. LAN IPv6 Address:
These are the settings of the LAN (Local Area Network) IPv6 interface for the router. The routers LAN IPv6 Address configuration is based on the IPv6 Address and Subnet assigned by your ISP. (A subnet with prefix /64 is supported in LAN.) D-Link DIR-860L User Manual 52 Section 3 - Configuration Tunneling Connection (6rd) After selecting the Tunneling Connection (6rd) option, you can configure the IPv6 6rd connection settings. 6rd IPv6 Prefix:
Enter the 6rd IPv6 address and prefix value used here. IPv4 Address:
Enter the IPv4 address used here. Mask Length:
Enter the IPv4 mask length used here. Assigned IPv6 Prefix:
6rd Border Relay IPv4 Address:
Displays the IPv6 assigned prefix value here. Enter the 6rd border relay IPv4 address used here. IPv6 DNS Server:
Enter the primary DNS Server address used here. The IPv6 Internet Connection Setup Wizard is complete. Click on the Connect button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page. D-Link DIR-860L User Manual 53 Section 3 - Configuration Manual IPv6 Local Connectivity Setup You can set up a local-only IPv6 Internet connection as well. If you want to configure an IPv6 connection that will not connect to the Internet, click on the Manual IPv6 Local Connectivity Settings button. Enable ULA:
Click here to enable Unique Local IPv6 Unicast Addresses settings. Use Default ULA Prefix:
Checking this box will automatically configure the ULA prefix for the default setting. ULA Prefix:
If you wish to choose your own ULA prefix, enter it here. Current IPv6 ULA Settings:
This section with display the current settings for your IPv6 ULA. D-Link DIR-860L User Manual 54 Section 3 - Configuration IPv6 Manual Setup
6to4, 6rd, and Link-local. If you are unsure of your connection method, please contact your IPv6 Internet Service Provider. Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or disabled. D-Link DIR-860L User Manual 55 Section 3 - Configuration Static IPv6 Select Static IPv6 from the drop-down menu. Enter the address settings supplied by your Internet provider (ISP). Enter a subnet prefix length. Enter the default gateway for your IPv6 connection. Enter the primary and secondary DNS server addresses. My IPv6 Connection Is:
Use Link-Local Address:
Subnet Prefix Length:
IPv6 Default Gateway:
Primary/
Secondary IPv6 DNS Servers:
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:
Enable Automatic IPv6 Address Assignment:
Autoconfiguration Type:
Router Advertisement Lifetime:
Displays the routers LAN Link-Local Address. Check to enable the Autoconfiguration feature. Choose either Stateful DHCPv6, or from the drop-down menu. Enter the IPv6 Address Lifetime (in minutes). D-Link DIR-860L User Manual 56 Section 3 - Configuration Auto Configuration My IPv6 Connection Is:
Select from the drop-down menu. IPv6 DNS Settings:
Select either Obtain DNS server address automatically or Use the
. Primary/Secondary DNS Address:
Enter the primary and secondary DNS server addresses. Enable DHCP-PD:
Check this box to enable DHCP-PD services. LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:
Enable Automatic IPv6 Address Assignment:
Enable Automatic DHCP-PD in LAN:
Displays the Routers LAN Link-Local Address. Check to enable the Automatic IPv6 Address Assignment feature. Check this box to automatically enable DHCP-PD services. Autoconfiguration Type:
Select Stateful (DHCPv6), or DHCPv6. Router Advertisement Lifetime:
Enter the IPv6 Address Lifetime (in minutes). D-Link DIR-860L User Manual 57 Section 3 - Configuration PPPoE My IPv6 Connection Is:
Select PPPoE from the drop-down menu. PPPoE Session:
Enter the PPPoE account settings supplied by your Internet provider. Address Mode:
Select Static if your ISP assigned you an IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic. IP Address:
Enter the IP address (Static PPPoE only). Username:
Enter your PPPoE user name. Password:
Enter your PPPoE password and retype the password in the next box. Service Name:
Reconnection mode:
Maximum Idle Time:
MTU:
IPv6 DNS Settings:
Primary/Secondary DNS Address:
Enter the ISP Service Name (optional). Select either , On-Demand, or Manual. Enter a maximum idle time during which the Internet connection is maintained during inactivity. Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU. Select either Obtain DNS server address automatically or . Enter the primary and secondary DNS server addresses. Check this box to enable DHCP prefix delegation for each LAN on the network. D-Link DIR-860L User Manual 58 Section 3 - Configuration Enable DHCP-D:
Enter the LAN (local) IPv6 address for the router. LAN IPv6 Address:
Displays the routers LAN Link-Local Address. LAN Link-Local Address:
Enable Automatic IPv6 Address Assignment:
Enable Automatic DHCP-PD in LAN:
Autoconfiguration Type:
IPv6 Address Lifetime:
Check to enable the Automatic IPv6 Address Assignment feature. Check this box to enable automatic configuration of the DHCP prefix delegation for each LAN on the network. Select Stateful (DHCPv6), or . Enter the IPv6 Address Lifetime (in minutes). D-Link DIR-860L User Manual 59 Section 3 - Configuration IPv6 in IPv4 Tunneling My IPv6 Connection Is:
Remote IPv4 Address:
Remote IPv6 Address:
Select IPv6 in IPv4 Tunnel from the drop-down menu. Enter the IPv4 remote address you will use. Enter the IPv6 remote address you will use. Local IPv4 Address:
Enter the IPv4 local address you will use. Local IPv6 Address:
Enter the IPv6 local address you will use. IPv6 DNS Settings:
Primary/Secondary DNS Address:
Select either Obtain DNS server address automatically or Use the
. Enter the primary and secondary DNS server addresses. Enable DHCP-D:
Check this box to enable DHCP prefix delegation for each LAN. LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router. LAN IPv6 Lin-Local Address:
Displays the routers LAN Link-Local Address. D-Link DIR-860L User Manual 60 Section 3 - Configuration Enable Automatic IPv6 Address Assignment:
Check to enable the Automatic IPv6 Address Assignment feature. Enable Automatic DHCP-PD in LAN:
Check this box to enable automatic configuration of the DHCP prefix delegation for each LAN on the network. Autoconfiguration Type:
Select Stateful (DHCPv6), or DHCPv6. Router Advertisement Lifetime:
Enter the Router Advertisement Lifetime (in minutes). D-Link DIR-860L User Manual 61 Section 3 - Configuration 6to4 My IPv6 Connection Is:
Select 6to4 from the drop-down menu. 6to4 Address:
Enter the IPv6 settings supplied by your ISP. 6to4 Relay:
Enter the IPv6 relay supplied by your ISP. Primary/Secondary DNS Address:
Enter the primary and secondary DNS server addresses. LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:
Enable Automatic IPv6 Address Assignment:
Displays the Routers LAN Link-Local Address. Check to enable the Automatic IPv6 Address Assignment feature. Autoconfiguration Type:
Select Stateful (DHCPv6), or DHCPv6. Router Advertisement Lifetime:
Enter the IPv6 Address Lifetime (in minutes). D-Link DIR-860L User Manual 62 Section 3 - Configuration 6rd My IPv6 Connection Is:
Select 6rd from the drop-down menu. Enable Hub and Spoke Mode:
Check this box if you want to minimize the number of routes to the destination by using a hub and spoke method of networking. 6rd Configuration:
Choose the 6rd DHCPv4 Option to automatically discover and populate the data values, or Manual Configuration to enter the settings yourself. 6rd IPv6 Prefix:
Enter the 6rd IPv6 prefix settings supplied by your ISP. IPv4 Address:
Your IPv4 address will appear here. Mask Length:
Enter the desired IPv4 mask length. Assigned IPv6 Prefix:
6rd Border Relay IPv4 Address:
Primary/
Secondary DNS Address:
When an IPv6 prefix is assigned, it will appear here. Enter the 6rd Border Relay IPv4 address settings supplied by your ISP. Enter the primary and secondary DNS server addresses. LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:
Displays the Routers LAN Link-Local Address. D-Link DIR-860L User Manual 63 Section 3 - Configuration Enable Automatic IPv6 Address Assignment:
Check to enable the Automatic IPv6 Address Assignment feature. Autoconfiguration Type:
Select Stateful (DHCPv6), or DHCPv6. Router Advertisement Lifetime:
Enter the IPv6 Address Lifetime (in minutes). D-Link DIR-860L User Manual 64 Section 3 - Configuration Link-Local Connectivity My IPv6 Connection Is:
LAN IPv6 Address Settings:
Select Link-Local Only from the drop-down menu. Displays the IPv6 address of the router. D-Link DIR-860L User Manual 65 Section 3 - Configuration mydlink Settings Devices that are mydlink-enabled can be accessed and managed through the mydlink website and by using mydlink mobile apps for iOS and Android. You cannot take advantage of these features without a mydlink account. If you have a mydlink account already, you can log in when you first set up the router, or by visiting this setup page. mydlink Service:
Displays whether your device is registered with a mydlink account or not. mydlink E-mail:
Displays the email address associated with your mydlink account if you have an active account. Register mydlink Service:
Click to go to the mydlink website to register your device or edit your settings. D-Link DIR-860L User Manual 66 Section 3 - Configuration Advanced Virtual Server This page will allow you to open a single port. If you would like to open a range of ports, refer to the next page. Name:
Enter a name for the rule or select an application from the drop-down menu. Select an application and click << to populate the fields. IP Address:
Enter the IP address of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), your computer will be listed in the Computer Name drop-down menu. Private Port/
Public Port:
Enter the port that you want to open next to Private Port and Public Port. The private and public ports are usually the same. The public port is seen from the Internet side, and the private port is used by the application on the computer within your local network. Protocol:
Select TCP, UDP, or Both from the drop-down menu. Schedule:
The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. Inbound Filter:
Select (most common) or a created Inbound filter. You may create your own inbound filters in the Inbound Filter page. D-Link DIR-860L User Manual 67 Section 3 - Configuration Port Forwarding This page will allow you to open a single port or a range of ports. Name:
Enter a name for the rule or select an application from the drop-down menu. Select an application and click to populate the fields. IP Address:
Enter the IP address of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), you computer will be listed in the Computer Name drop-
down menu. Select your computer and click <<. TCP/UDP:
Enter the TCP and/or UDP port or ports that you want to open. You can enter a single port or a range of ports. Separate ports
Schedule:
The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to , which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. Inbound Filter:
Select (most common) or a created Inbound filter. You may create your own inbound filters in the Inbound Filter page. D-Link DIR-860L User Manual 68 Section 3 - Configuration Application Rules Some applications, such as Internet gaming, video conferencing, Internet telephony and others, require multiple connections. These applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DIR-860L. If you need to run applications that require multiple connections, specify the port normally associated with an application in the Trigger Port field, select the protocol type as TCP or UDP, then enter the firewall (public) ports associated with the trigger port to open them for inbound traffic. Name:
Enter a name for the rule. You may select a pre-defined application from the drop-down menu and click. Trigger:
This is the port used to trigger the application. It can be either a single port or a range of ports. Traffic Type:
Select the protocol of the trigger port (TCP, UDP, or Both). Firewall:
This is the port number on the Internet side that will be used to access the application. You may define a single port or a range of ports. You can use a comma to add multiple ports or port ranges. Traffic Type:
Select the protocol of the firewall port (TCP, UDP, or Both). Schedule:
The schedule of time when the Application Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Link DIR-860L User Manual 69 Section 3 - Configuration QoS Engine The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the QoS Engine settings are disabled and application priority is not classified automatically. Enable QoS Engine:
This option is disabled by default. Enable this option for better performance and experience with online games and other interactive applications, such as VoIP. Automatic Uplink Speed:
This option is enabled by default when the QoS Engine option is enabled. This option will allow your router to automatically determine the uplink speed of your Internet connection. Measured Uplink Speed:
Manual Uplink Speed:
This displays the detected uplink speed. The speed at which data can be transferred from the router to your ISP. This is determined by your ISP. ISPs state often speed as a download/
284. Alternatively you can test your uplink speed using an online speed testing website or service. QoS Engine Rules:
A QoS Engine Rule identifies a specific message flow and assigns a priority to that flow. For most applications, automatic classification will be adequate, and specific QoS Engine Rules will not be required. The QoS Engine supports overlaps between rules, where more than one rule can match for a specific message flow. If more than one rule is found to match, the rule with the highest priority will be used. Name:
Create a name for the rule that is meaningful to you. Priority:
The priority of the message flow is entered here -- 1 receives the highest priority (most urgent) and 255 receives the lowest priority (least urgent). Protocol:
The protocol used by the messages. D-Link DIR-860L User Manual 70 Section 3 - Configuration Local IP Range:
The rule applies to a flow of messages whose LAN-side IP address falls within the range set here. Local Port Range:
The rule applies to a flow of messages whose LAN-side port number is within the range set here. Remote IP Range:
The rule applies to a flow of messages whose WAN-side IP address falls within the range set here. Remote Port Range:
The rule applies to a flow of messages whose WAN-side port number is within the range set here. D-Link DIR-860L User Manual 71 Section 3 - Configuration Network Filters Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers from accessing the network according to their MAC addresses. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the DIR-860L. Configure MAC Filtering:
Select, below, or from the drop-
down menu. MAC Address:
Enter the MAC address you would like to filter. To find the MAC address on a computer, please refer to the Networking Basics section in this manual. DHCP Client:
Select a DHCP client from the drop-down menu and click << to copy that MAC Address. Clear:
Click to remove the MAC address. D-Link DIR-860L User Manual 72 Section 3 - Configuration Access Control The Access Control section allows you to control access in and out of your network. Use this feature as a parental control to only grant access to approved sites, limit web access based on time or date, and/or block access from applications like P2P utilities or games. Add Policy:
Click the button to start the Access Control Wizard. Click Next to continue with the wizard. Access Control Wizard D-Link DIR-860L User Manual 73 Section 3 - Configuration Enter a name for the policy and then click Next to continue.
then click Next to continue. Enter the following information and then click Next to continue.
- Select IP address, MAC address, or Other Machines.
- Enter the IP address of the computer you want to apply the rule to.
Select the filtering method and then click Next to continue. D-Link DIR-860L User Manual 74 Section 3 - Configuration
Enable - Check to enable the rule. Name - Enter a name for your rule. Dest IP Start - Enter the starting IP address. Dest IP End - Enter the ending IP address. Protocol - Select the protocol. Dest Port Start - Enter the starting port number. Dest Port End - Enter the ending port number. To enable web logging, click Enable. Click Save to save the access control rule. Your newly created policy will now show up under Policy Table. D-Link DIR-860L User Manual 75 Section 3 - Configuration Website Filters Website Filters are used to allow you to set up a list of Web sites that can be viewed by multiple users through the network. To use this feature select to or Deny, enter the domain or website and click Save Settings. You must also select Web Filter under the Access Control section. Configure Website Filter:
Select either DENY computers access to ONLY these sites or . Website URL/
Domain:
Enter the keywords or URLs that you want to allow or block. Click Save Settings. D-Link DIR-860L User Manual 76 Section 3 - Configuration Inbound Filter The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can configure inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used with Virtual Server, Port Forwarding, or Remote Administration features. Name:
Enter a name for the inbound filter rule. Action:
Select or Deny. Enable:
Check to enable rule. Remote IP Start:
Enter the starting IP address. Enter 0.0.0.0 if you do not want to specify an IP range. Remote IP End:
Enter the ending IP address. Enter 255.255.255.255 if you do not want to specify and IP range. Add:
Click the button to apply your settings. You must click Save Settings at the top to save the settings. Inbound Filter Rules List:
This section will list any rules that are created. You may click the Edit icon to change the settings or enable/disable the rule, or click the Delete icon to remove the rule. D-Link DIR-860L User Manual 77 Section 3 - Configuration Firewall Settings A firewall protects your network from the outside world. The DIR-860L offers a firewall type functionality. The SPI feature helps prevent cyber attacks. Sometimes you may want a computer exposed to the outside world for certain types of applications. If you choose to expose a computer, you can enable Demilitarized Zone (DMZ). This option will expose the chosen computer completely to the outside world. Enable SPI:
Anti-Spoof Check:
Enable DMZ:
SPI (Stateful Packet Inspection, also known as dynamic packet filtering) helps to prevent cyber attacks by tracking the state of each session. It validates that the traffic passing through the session conforms to the protocol. Enable this feature to protect your network from certain kinds of spoofing attacks. If an application has trouble working from behind the router, you can expose one computer to the Internet and run the application on that computer. DMZ IP Address:
Note: Placing a computer in the DMZ may expose that computer to a variety of security risks. Use of this option is only recommended as a last resort. Specify the IP address of the computer on the LAN that you want to have unrestricted Internet communication. If this computer obtains its IP address automatically using DHCP, be sure to make a static reservation on the Setup > Network Settings page so that the IP address of the DMZ machine does not change. PPTP:
IPSEC (VPN):
Allows multiple machines on the LAN to connect to their corporate network using PPTP protocol. Allows multiple VPN clients to connect to their corporate network using IPSec. Some VPN clients support traversal of IPSec through NAT. This Application-level Gateway (ALG) may interfere with the operation of such VPN clients. If you are having trouble connecting with your corporate network, try turning this ALG off. Please check with the system D-Link DIR-860L User Manual 78 Section 3 - Configuration RTSP:
administrator of your corporate network whether your VPN client supports NAT traversal. Allows application that uses Real Time Streaming Protocol to receive streaming media from the Internet. QuickTime and Real Player are some of the common applications using this protocol. SIP:
Allows devices and applications using VoIP (Voice over IP) to communicate across NAT. Some VoIP applications and devices have the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. D-Link DIR-860L User Manual 79 Section 3 - Configuration Routing The Routing option is an advanced method of customizing specific routes of data through your network. Name:
Enter a name for your route. Destination IP:
Enter the IP address of packets that will take this route. Netmask:
Enter the netmask of the route, please note that the octets must match your destination IP address. Gateway:
Enter your next hop gateway to be taken if this route is used. Metric:
The route metric is a value from 1 to 16 that indicates the cost of using this route. A value 1 is the lowest cost and 15 is the highest cost. Interface:
Select the interface that the IP packet must use to transit out of the router when this route is used. D-Link DIR-860L User Manual 80 Section 3 - Configuration This page allows you to change some of the advanced wireless settings of the DIR-860L. It is recommended that you only change these settings if you are familiar with their functions and proper settings, or are instructed to do so. Advanced Wireless Wireless Band This section will allow you to adjust the settings for the Transmit Power:
Set the transmission power of the antennas for the 2.4 GHz band. WLAN Partition:
This enables 802.11d operation. 802.11d is a wireless specification developed to allow implementation of wireless networks in countries that cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires it. WMM Enable:
WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients. HT20/40 Coexistence:
Enable this option to reduce interference from other wireless networks in your area. If the channel width is operating at 40MHz and there is another wireless networks channel over-lapping and causing interference, the router will automatically change to 20MHz. Wireless Band:
This section will allow you to adjust the settings for the . Transmit Power:
Set the transmission power of the antennas for the 5 GHz band. WLAN Partition:
This enables 802.11d operation. 802.11d is a wireless specification developed to allow implementation of wireless networks in countries that cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires it. WMM Enable:
WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients. D-Link DIR-860L User Manual 81 Section 3 - Configuration Wi-Fi Protected Setup Wi-Fi Protected Setup (WPS) is a simplified method for securing your wireless network during the Initial setup as well as the Add New Device processes. The Wi-Fi Alliance (WFA) has certified WPS across many different products and manufacturers. The process as simple as pressing a button for the Push-Button Method or correctly entering an 8-digit code for the PIN Code Method. The time reduction in setup and ease of use are significant, and the highest wireless security setting of WPA2 is automatically used. Enable:
Enable the Wi-Fi Protected Setup feature. Note: if this option is unchecked, the WPS button on the side of the router will be disabled. Lock WPS-PIN Setup:
PIN Settings:
Check to disable the option of configuring the WPS PIN options. A PIN is a unique number that can be used to add the router to an existing network or to create a new network. Only the Administrator (admin account) can change or reset the PIN. Current PIN:
Shows the current PIN. Generate New PIN:
Create a random number that is a valid PIN. This becomes the routers PIN. You can then use this pin to access your wireless network. Reset PIN to Default:
Restore the default PIN of the router. D-Link DIR-860L User Manual 82 Section 3 - Configuration Add Wireless Station:
This Wizard helps you add wireless devices to the wireless network. The wizard will either display the wireless network settings to guide you through manual configuration, prompt you to enter the PIN for the device, or ask you to press the configuration button on the device. If the device supports Wi-Fi Protected Setup and has a configuration button, you can add it to the network by pressing the configuration button on the device and then the on the router within 120 seconds. The status LED on the router will flash three times if a device has been successfully added to the network. There are several ways to add a wireless device to your network. A registrar controls access to the wireless network. A registrar only allows devices onto the wireless network if you have entered the correct PIN, or pressed a special WPS button on the device. The router acts as a registrar for the network, although other devices may act as a registrar as well. Click to start the wizard, and refer to page 38 for further instructions. WPS Button You can also simply press the WPS button on the side of the router, and then press the WPS button on your wireless client within 120 seconds to automatically connect without logging into the router. Refer to page 106 for more information. WPS Button D-Link DIR-860L User Manual 83 Section 3 - Configuration This page allows you to change some of the advanced network settings of the DIR-860L. It is recommended that you only change these settings if you are familiar with their functions and proper settings, or are instructed to do so. Advanced Network Enable UPnP:
To use the Universal Plug and Play (UPnP) feature click on Enabled. UPnP provides plug and play functionality with compatible networking equipment, software and peripherals. WAN Ping:
Checking the box will allow the DIR-860L to respond to pings. Unchecking the box may provide some extra security from hackers. WAN Ping Inbound Filter:
Select from the drop-down menu if you would like to apply the Inbound Filter to the WAN ping. Refer to the Inbound Filters section for more information. WAN Port Speed:
You may set the port speed of the Internet/WAN port to 10Mbps, 100Mbps, 1000Mbps, or Auto (recommended). Enable IPV4 Multicast Streams:
Check the box to allow multicast traffic to pass through the router from the Internet (IPv4). Enable IPV6 Multicast Streams:
Check the box to allow multicast traffic to pass through the router from the Internet (IPv6). D-Link DIR-860L User Manual 84 Section 3 - Configuration Guest Zone The Guest Zone feature will allow you to create temporary zones that can be used by guests to access the Internet. These zones will be separate from your main wireless network. You may configure different zones for the 2.4GHz and 5GHz wireless bands. Enable Routing Between Zones:
Check to allow network connectivity between the different zones created. Enable Guest Zone:
Check to enable the Guest Zone feature for the 2.4 GHz band. Schedule:
The timeframe when the Guest Zone will be active. The schedule may be set to , which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section or click . Wireless Network Name:
Enter a wireless network name (SSID) that is different from that of your main wireless network. Security Mode:
If you want to choose a security mode for the 2.4 GHz band, choose from the drop-down menu. Enable Guest Zone:
Check to enable the Guest Zone feature for the 5 GHz band. Schedule:
The timeframe when the Guest Zone will be active. The schedule may be set to , which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section or click . Wireless Network Name:
Enter a wireless network name (SSID) that is different from that of your main wireless network and 2.4GHz band guest zone (if enabled). Security Mode:
If you want to choose a security mode for the 5 GHz band, choose from the drop-down menu. D-Link DIR-860L User Manual 85 Section 3 - Configuration IPv6 Firewall The DIR-860Ls IPv6 Firewall feature allows you to configure which kind of IPv6 traffic is allowed to pass through the device. The DIR-860Ls IPv6 Firewall functions in a similar way to the IP Filters feature. Enable IPv6 Simple Security:
Configure IPv6 Firewall:
Check the box to enable the IPv6 firewall simple security. Select an action from the drop-down menu. Name:
Enter a name to identify the IPv6 firewall rule. Schedule:
Use the drop-down menu to select the time schedule that the IPv6 Firewall Rule will be enabled on. The schedule may be set to , which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. Source:
Use the Source drop-down menu to specify the interface that connects to the source IPv6 addresses of the firewall rule. IP Address Range:
Enter the source IPv6 address range in the adjacent IP Address Range field. Destination:
Use the Destination drop-down menu to specify the interface that connects to the destination IP addresses of the firewall rule. Protocol:
Select the protocol of the firewall port (, TCP, UDP, or ICMP). Port Range:
Enter the first port of the range that will be used for the firewall rule in the first box and enter the last port in the field in the second box. D-Link DIR-860L User Manual 86 Section 3 - Configuration IPv6 Routing This page allows you to specify custom routes that determine how data is moved around your network. Route List:
Check the box next to the route you wish to enable. Name:
Enter a specific name to identify this route. Destination IP/
Prefix Length:
This is the IP address of the router used to reach the specified destination. You can also enter the IPv6 address prefix length of the packets that will take this route. Metric:
The route metric is a value from 1 to 16 that indicates the cost of using this route. A value 1 is the lowest cost and 15 is the highest cost. Interface:
Use the drop-down menu to specify if the IP packet must use the WAN or LAN interface to transit out of the Router. Gateway:
Enter the next hop that will be taken if this route is used. D-Link DIR-860L User Manual 87 Section 3 - Configuration Tools Admin This page will allow you to change the Administrator password. You can also enable Remote Management. Admin has full read/write access to the routers settings. Admin Password:
Here you can enter a new password for the Administrator Login Name. The administrator can make changes to the settings. Enter the new password twice for verification. Gateway Name:
Enter a name for your router. Enable Graphical Authentication:
Enables a CAPTCHA challenge-response test, which requires users to type letters or numbers from a distorted image displayed on the screen This prevents unauthorized users from using automated methods to gain access your wireless network. Enable HTTPS Server:
Check to enable HTTPS to connect to the router securely. This means to connect to the router, you must enter or https://192.168.0.1 (for example) instead of or http://192.168.0.1. Enable Remote Management:
Remote management allows the DIR-860L to be configured from the Internet by a web browser. A username/password is still required to access the Web Management interface. Remote Admin Port:
where x.x.x.x is the Internet IP address of the DIR-860L and 8080 is the port used for the Web Management interface. If you have enabled you must enter as part of the URL to access the router remotely. Remote Admin Inbound Filter:
This section will list any rules that are created. You may click the Edit icon to change the settings or enable/disable the rule, or click the Delete icon to remove the rule. Details will display the current status of the rule. D-Link DIR-860L User Manual 88 Section 3 - Configuration Time The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also be configured to automatically adjust the time when needed. Time:
Displays the current date and time of the router. Time Zone:
Select your Time Zone from the drop-down menu. Enable Daylight Saving:
To select Daylight Saving time manually, select enabled or disabled, and enter a start date and an end date for daylight saving time. Enable NTP Server:
NTP is short for Network Time Protocol. An NTP server will synchronize the time and date with your router. This will only connect to a server on the Internet, not a local server. Check the box to enable this feature. NTP Server Used:
Enter the IP address of an NTP server or select one from the drop-down menu. Manual:
To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second and then click Set Time. You can also click Sync Your Computers Time Settings to sync the date and time with that of the computer you are currently using. D-Link DIR-860L User Manual 89 Section 3 - Configuration SysLog The Broadband Router keeps a running log of events and activities occurring on the Router. You may send these logs to a SysLog server on your network. Enable Logging to SysLog Server: Check this box to send the router logs to a SysLog Server. D-Link DIR-860L User Manual 90 Section 3 - Configuration Email Settings The Email feature can be used to send the system log files, router alert messages, and firmware update notifications to an email address. Enable Email Notification:
When this option is enabled, router activity logs are emailed to a designated email address. From Email Address:
This email address will appear as the sender when you receive a log file or firmware upgrade notification via email. To Email Address:
Enter the email address where you want the email to be sent. SMTP Server Address:
Enter the SMTP server address for sending email. SMTP Server Port:
Enter the SMTP port used on the server. Enable Authentication:
Check this box if your SMTP server requires authentication. Account Name:
Enter your account for sending email. Password:
Enter the password associated with the account. Re-type the password associated with the account. On Log Full:
When this option is selected, logs will be sent via email to your account when the log is full. On Schedule:
Selecting this option will send the logs via email according to schedule. Schedule:
This option is enabled when On Schedule is selected. You can select a schedule from the list of defined schedules. To create a schedule, go to . Details:
Here you can choose from a drop down menu whether email details are kept in the log or not. D-Link DIR-860L User Manual 91 Section 3 - Configuration System This section allows you to manage the routers configuration settings, reboot the router, and restore the router to the factory default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that youve created. Save Settings to Local Hard Drive:
Use this option to save the current router configuration settings to a file on the hard disk of the computer you are using. First, click the Save Configuration button. A file dialog will appear, allowing you to select a location and file name for the settings. Load Settings from Local Hard Drive:
Use this option to load previously saved router configuration settings. First, use the Browse option to find a previously saved file of configuration settings. Then, click the Load button to transfer those settings to the router. Restore to Factory Default Settings:
This option will restore all configuration settings back to the settings that were in effect at the time the router was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save button above. Reboot Device:
Click to reboot the router. D-Link DIR-860L User Manual 92 Section 3 - Configuration Firmware You can upgrade routers firmware using this feature. Make sure the firmware you want to use is on the local hard drive of the computer you are using. Click on Choose File to locate the firmware file to be used for the update. Please check the D-Link support website for firmware updates at
. You can download firmware upgrades to your hard drive from this site. Firmware Information This section shows the details of the current firmware version that is installed. Click on the check now button to check online for new firmware versions. Firmware Upgrade You can change update the internal router software by uploading a new firmware version. Choose File:
After you have downloaded the new firmware, click Choose File to locate the firmware update on your hard drive. Upload:
Click Upload to complete the firmware upgrade. Language Pack You can change the language of the web UI by uploading available language packs. Choose File:
After you have downloaded the new language pack, click Choose File to locate the language pack file on your hard drive. Upload:
Click Upload to complete the language pack upgrade. D-Link DIR-860L User Manual 93 Section 3 - Configuration Dynamic DNS The DDNS feature allows you to host a server (Web, FTP, Game Server, etc.) using a domain name that you have purchased with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses. Using a DDNS service provider, your friends can enter your domain name to connect to your server no matter what your IP address is. Enable Dynamic DNS:
Dynamic Domain Name System is a method of keeping a domain name linked to a changing IP Address. Check the box to enable DDNS. Server Address:
Select your DDNS provider from the drop-down menu or enter the DDNS server address. Host Name:
Enter the Host Name that you registered with your DDNS service provider. Username or Key:
Enter the Username or key for your DDNS account. Password or Key:
Enter the Password or key for your DDNS account. Timeout:
Enter a timeout time (in hours). Status:
Displays the current connection status. Enable DDNS for IPv6 Hosts Check the Enable box to enable DDNS for IPv6 Hosts. IPv6 Address:
Select your DDNS provider from the drop-down menu or enter the DDNS server address. Host Name:
Enter the Host Name that you registered with your DDNS service provider. IPv6 DDNS List:
Displays the list of active IPv6 Dynamic DNS addresses. D-Link DIR-860L User Manual 94 Section 3 - Configuration System Check Ping Test:
The Ping Test is used to send Ping packets to test if a computer is connected to the Internet. Enter the IP address that you wish to Ping and click Ping. IPv6 Ping Test:
Enter the IPv6 address that you wish to Ping and click Ping. Ping Results:
The results of your ping attempts will be displayed here. D-Link DIR-860L User Manual 95 Section 3 - Configuration Schedules Schedules can be created for use with enforcing rules. For example, if you want to restrict web access to Mon-Fri from 3pm to 8pm, you can create a schedule selecting Mon, Tue, Wed, Thu, and Fri and enter a Start Time of 3pm and End Time of 8pm. Name:
Enter a name for your new schedule. Days:
Select a day, a range of days, or All Week to include every day. All Day - 24 Hrs:
Check to schedule the entire day. Time Format:
Choose a 24 hour or 12 hour clock-style. Start Time:
Enter a start time for your schedule. End Time:
Enter an end time for your schedule. Schedule Rules List:
The list of schedules will be listed here. Click the Edit icon to make changes or click the Delete icon to remove the schedule. D-Link DIR-860L User Manual 96 Section 3 - Configuration Status Device Info This page displays the current information for the DIR-860L. It will display the LAN, WAN (Internet), and Wireless information. If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP. If your Internet connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use Disconnect to drop the PPPoE connection and use Connect to establish the PPPoE connection. General:
Displays the routers time and firmware version. WAN:
Displays the MAC address and the public IP settings LAN:
Displays the MAC address and the private (local) IP settings for the router. Wireless LAN1:
Displays the 2.4GHz wireless MAC address and your wireless settings such as SSID and Channel. Wireless LAN2:
Displays the 5GHz wireless MAC address and your wireless settings such as SSID and Channel. LAN Computers:
Displays computers and devices that are connected to the router via Ethernet and that are receiving an IP address assigned by the router (DHCP). IGMP Multicast Memberships:
Displays the group address of any IGMP multicasts. D-Link DIR-860L User Manual 97 Section 3 - Configuration Logs The router automatically logs (records) events of possible interest in its internal memory. If there isnt enough internal memory for all events, logs of the oldest events are deleted firstand replaced with logs of the most recent events. The Logs option allows you to view the router logs. You can define what types of events you want to view and the level of the events to view. This router also has external Syslog Server support so you can send the log files to a computer on your network that is running a Syslog utility. Log Options:
You can select the types of messages that you want to display from the log. System Activity, Debug Information, Attacks, Dropped Packets, and Notice messages can be selected. Click
to activate your settings. Refresh:
Updates the log details on the screen so it displays any recent activity. First Page:
Click to go to the first page. Last Page:
Click to go to the last page. Previous:
Click to go back one page. Next:
Click to go to the next page. Clear:
Clears all of the log contents. Email Now:
This option will send a copy of the router log to the email address configured in the Tools > Email Settings screen. Save Log:
This option will save the router log to a file on your computer. D-Link DIR-860L User Manual 98 Section 3 - Configuration Statistics The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-860L on both the WAN, LAN ports and the wireless segments. The traffic counter will reset if the device is rebooted. D-Link DIR-860L User Manual 99 Section 3 - Configuration Internet Sessions The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer. D-Link DIR-860L User Manual 100 Section 3 - Configuration Wireless The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless clients. D-Link DIR-860L User Manual 101 Section 3 - Configuration This page will display your current routing table. Routing D-Link DIR-860L User Manual 102 Section 3 - Configuration IPv6 The IPv6 page displays a summary of the Routers IPv6 settings and lists the IPv6 address and host name of any IPv6 clients. D-Link DIR-860L User Manual 103 Section 3 - Configuration This page displays the IPV6 routing details configured for your router. IPv6 Routing D-Link DIR-860L User Manual 104 Section 3 - Configuration The Support pages let you jump to descriptions of the settings and their functions. Support D-Link DIR-860L User Manual 105 Section 4 - Security Connect a Wireless Client to your Router WPS Button The easiest way to securely connect your wireless devices to the router is using WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button
(or a software utility with WPS) that you can press to connect to the DIR-860L router. Please refer to the user manual for the
Step 1 - Press the WPS button on the DIR-860L for about 1 second. The Internet LED on the front will start to blink. WPS Button Step 2 - Within 120 seconds, press the WPS button on your wireless client (or launch the software utility and start the WPS process). Step 3 - Allow up to 1 minute while your connection is configured. Once the Internet light stops blinking, you will be connected and your wireless connection will be secure with WPA2. D-Link DIR-860L User Manual 106 Section 4 - Security Windows 7 WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or password being used. 1. Click on the wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. Wireless Icon D-Link DIR-860L User Manual 107 Section 4 - Security 3. Highlight the wireless connection with Wi-Fi name (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-860L User Manual 108 Section 4 - Security 5. Enter the same security key or passphrase (Wi-Fi password) was set for your router and click Connect. You can also connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-860L User Manual 109 Section 4 - Security WPS The WPS feature of the DIR-860L can be configured using Windows 7. Carry out the following steps to use Windows 7 to
1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side. D-Link DIR-860L User Manual 110 Section 4 - Security 3. Double-click the DIR-860L. 4. Input the WPS PIN number (displayed in the WPS window on the Setup > Wireless Setup menu in the Routers Web UI) and click Next. D-Link DIR-860L User Manual 111 Section 4 - Security 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DIR-860L User Manual 112 Section 4 - Security 7. The following window appears while the Router is being configured. Wait for the configuration to complete. 8. The following window informs you that WPS on the router has been setup successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DIR-860L User Manual 113 Section 5 - Connecting to a Wireless Network Windows Vista Windows Vista users may use the built-in wireless utility. If you are using another utility, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a site survey option similar to the Windows Vista utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select Connect to a network. The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/
IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-860L User Manual 114 Section 5 - Connecting to a Wireless Network WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Open the Windows Vista Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. D-Link DIR-860L User Manual 115 Section 5 - Connecting to a Wireless Network 3. Enter the same security key or passphrase (Wi-Fi password) was set for your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-860L User Manual 116 Section 5 - Connecting to a Wireless Network WPS/WCN 2.0 The router supports Wi-Fi protection, referred to as WCN 2.0 in Windows Vista. The following instructions for setting this up depends on whether you are using Windows Vista to configure the router or third party software. When you first set up the router, Wi-Fi protection is disabled and unconfigured. To enjoy the benefits of Wi-Fi protection, the
support for WCN 2.0, use software provided by a third party, or manually configure. If you are running Windows Vista, log into the router and click the Enable checkbox in the Basic > Wireless section. Use the Current PIN that is displayed on the > Wi-Fi Protected Setup section or choose to click the Generate New PIN button or Reset PIN to Default button. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed to the next section to set up the newly-configured router. D-Link DIR-860L User Manual 117 Section 5 - Connecting to a Wireless Network Windows XP Windows XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are using another utility, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a site survey option similar to the Windows XP utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select . The utility will display any available wireless networks in your area. Click on a Wi-Fi network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-860L User Manual 118 Section 5 - Connecting to a Wireless Network WPA/WPA2 It is recommended to enable WPA on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WPA key being used. 1. Open the Windows XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select . 2. Highlight the Wi-Fi network (SSID) you would like to connect to and click Connect. D-Link DIR-860L User Manual 119 Section 5 - Connecting to a Wireless Network 3. The Wireless Network Connection box will appear. Enter the WPA-PSK Wi-Fi password and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The Wi-Fi password must be exactly the same as on the wireless router. D-Link DIR-860L User Manual 120 Section 6 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DIR-860L. Read the following descriptions if you are having problems. The examples below are illustrated in Windows XP. If you have a different operating system, the screenshots on your computer will look similar to the following examples. 1. Why cant I access the web-based configuration utility?
When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility.
- Microsoft Internet Explorer 7 and higher
- Mozilla Firefox 3.5 and higher
- Google Chrome 8 and higher
- Apple Safari 4 and higher
different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on.
Norton Personal Firewall, and Windows XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DIR-860L User Manual 121 Section 6 - Troubleshooting
Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults.
Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK.
tab and click the button to restore these settings to their defaults. Click OK three times.
should open the login page for your web management.
and try accessing the configuration. If you have multiple computers, try connecting using a different computer. 2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back to the factory defaults. To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is admin and leave the password box empty. D-Link DIR-860L User Manual 122 Section 6 - Troubleshooting 3. Why cant I connect to certain sites or send and receive emails when connecting through my router?
If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc). To find the proper MTU Size, youll have to do a special ping of the destination youre trying to go to. A destination could be another computer, or a URL.
Start and then click Run.
command (Windows NT, 2000, XP, Vista, and 7 users type in cmd) and press Enter (or click OK).
ping [url] [-f] [-l] [MTU value]
ping yahoo.com -f -l 1472 D-Link DIR-860L User Manual 123 Section 6 - Troubleshooting You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, if 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network youre working with (1452+28=1480). Once you find your MTU, you can now configure your router with the proper MTU size.
OK.
OK to enter the web configuration page for the device.
Setup and then click Manual Configure.
Save Settings to save your settings.
of ten. D-Link DIR-860L User Manual 124 Appendix A - Wireless Basics Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers. A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link. D-Link DIR-860L User Manual 125 Appendix A - Wireless Basics What is Wireless?
Wireless, or Wi-Fi technology is a way of connecting your computer to the network without using wires. Wi-Fi uses radio frequencies to connect wirelessly, so you have the freedom to connect computers anywhere in your home or office to your network. Why D-Link Wireless?
D-Link is the worldwide leader and an award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link offers all the products you need to build your network. How does wireless work?
Wireless works similarly to how cordless phones work, using radio signals to transmit data from one point to another. In order to access a network wirelessl you must be within the wireless network range area. There are two different types of wireless
In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth using radio signals. With an indoor access point such as the DIR-860L, the signal can travel up to 300 feet. With an outdoor access point the signal can reach up to 30 miles to serve places like manufacturing plants, industrial locations, school campuses, airports, golf courses, and many other outdoor venues. D-Link DIR-860L User Manual 126 Appendix A - Wireless Basics
Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate within a range of up to 30 feet. Compared to WLAN, the speed and wireless operation range are both reduced when using WPAN, however WPAN doesnt uses less power, which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries. Who uses wireless?
Wireless technology has become increasingly popular in recent years, whether its for home, office, or business, D-Link has a wireless solution. Home
Small Office and Home Office
D-Link DIR-860L User Manual 127 Appendix A - Wireless Basics Where is wireless used?
Wireless technology is expanding everywhere, not just at home or in the office. People like the freedom of mobility and its becoming so popular that more and more public facilities now provide wireless access. A wireless connection in public places is usually called a hotspot. Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations such as Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers. A wireless network is simple to setup, but if youre installing one for the first time it could be quite a task if you do not know where to start. Thats why weve put together a few setup steps and tips to help you through the process of setting up a wireless network. Tips Here are a few things to keep in mind when you install a wireless network.
Make sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal in order to extend the range. Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This can significantly reduce any interference that these appliances might cause since they operate on same frequency. D-Link DIR-860L User Manual 128 Appendix A - Wireless Basics Security Dont let neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the routers WPA or WEP security feature. Refer to product manual for detailed information on how to set up this feature. Wireless Modes
Infrastructure All wireless clients will connect to an access point or wireless router.
Devices connect directly to one another, for peer-to-peer communication, using wireless network adapters on each computer, such as two computers with wireless adaptors. An Infrastructure network contains an Access Point or wireless router. All wireless devices, or clients, will connect to the wireless router or access point in order to access the internet or other network resources. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All adapters must be in Ad-Hoc mode to communicate. D-Link DIR-860L User Manual 129 Appendix B - Networking Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > Run. In the run box type cmd and click OK. (Windows 7/Vista users type cmd in the Start Search box.) At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-860L User Manual 130 Appendix B - Networking Basics Statically Assign an IP address
Step 1 Windows 7 -
Windows Vista - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Click on Start > Control Panel > Network and Internet > Network and Sharing Center. Windows XP -
Windows 2000 - From the desktop, right-click My Network Places > Properties. Connections. Click on Start > Control Panel > Network Connections. Step 2 Right-click on the which represents your network adapter and select Properties. Step 3 Highlight and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router.
where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set the Default Gateway the same as the LAN IP address of your router (I.E. 192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DIR-860L User Manual 131 Appendix B - Networking Basics Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DIR-860L offers the
What is WPA?
WPA (Wi-Fi Protected Access), is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy).
algorithm and, by adding an integrity-checking feature, ensures that the keys havent been tampered with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP.
regulates access to a wireless network based on a computers hardware-specific MAC address, which is relatively simple to be sniffed out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized network users can access the network. WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DIR-860L User Manual 132 Appendix C - Technical Specifications Technical Specifications Device Interfaces
10/100/1000 Gigabit WAN port
USB 3.0 port
Standards
Security
- Personal/Enterprise
- Personal/Enterprise
Power
USB Port Power
Operating Temperature
Humidity
Safety & Emissions
Dimensions
1 Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. 2 Frequency Range varies depending on countrys regulation. 3 The DIR-860L does not include 5.25-5.35GHz & 5.47-5.725GHz in some regions. D-Link DIR-860L User Manual 133 FCC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body. Chain Brand Model Name 1 2 WHA YU WHA YU SSR-30247 SSR-30247 Antenna Type PCB Antenna PCB Antenna Connector I-PEX I-PEX Gain
(dBi) 4 4 Note: The EUT has two Chains. Loss of External Cable
(dB) True Gain
(dBi) Remark 0.18 3.82 TX / RX 0.18 3.82 TX / RX 5G Module FCC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. This device is going to be operated in 5.15~5.25GHz frequency range, it is restricted in indoor environment only. Devices will not permit operations on channels 120-132 for 11a and 11n/a which overlap the 5600 -
5650 MHz band. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment.If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Chain Brand Model Name 1 2 WHA YU WHA YU SSR-30247 SSR-30247 Antenna Type PCB Antenna PCB Antenna Connector I-PEX I-PEX Gain
(dBi) 4 4 Note: The EUT has two Chains.
Loss of External Cable
(dB) True Gain
(dBi) Remark 0.18 3.82 TX / RX 0.18 3.82 TX / RX 5G Module IC Statement This Class [B] digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe [B] est conforme la norme NMB-003 du Canada. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Cet appareil et son antenne (s) ne doit pas tre co-localiss ou fonctionnement en association avec une autre antenne ou transmetteur. IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. Le dispositif pourrait automatiquement cesser d'mettre en cas d'absence d'informations transmettre, ou une dfaillance oprationnelle. Notez que ce n'est pas l'intention d'interdire la transmission des informations de contrle ou de signalisation ou l'utilisation de codes rptitifs lorsque requis par la technologie. The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. Dynamic Frequency Selection (DFS) for devices operating in the bands 5250- 5350 MHz, 5470-5600 MHz and 5650-5725 MHz Slection dynamique de frquences (DFS) pour les dispositifs fonctionnant dans les bandes 5250-5350 MHz, 5470-5600 MHz et 5650-5725 MHz The maximum antenna gain permitted (for devices in the bands 5250-5350 MHz and 5470-5725 MHz) to comply with the e.i.r.p. limit. le gain maximal dantenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se conformer la limite de p.i.r.e.;
Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. le gain maximal dantenne permis (pour les dispositifs utilisant la bande 5725-5825 MHz) doit se conformer la limite de p.i.r.e. spcifie pour lexploitation point point et non point point, selon le cas. In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the IC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment.IC statement is required to be available in the users manual: This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante.
This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (identifier le dispositif par son numro de certification ou son numro de modle s'il fait partie du matriel de catgorie I) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Chain Brand Model Name 1 2 WHA YU WHA YU SSR-30247 SSR-30247 Antenna Type PCB Antenna PCB Antenna Connector I-PEX I-PEX Gain
(dBi) 4 4 Note: The EUT has two Chains. Loss of External Cable
(dB) True Gain
(dBi) Remark 0.18 3.82 TX / RX 0.18 3.82 TX / RX
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2013-02-18 | 2422 ~ 2452 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2013-02-18
|
||||
1 | Applicant's complete, legal business name |
D-Link Corporation
|
||||
1 | FCC Registration Number (FRN) |
0007371172
|
||||
1 | Physical Address |
17595 Mt. Herrmann
|
||||
1 |
Fountain Valley, California 92708
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
B******@phoenix-testlab.de
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
KA2
|
||||
1 | Equipment Product Code |
IR860LA1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
B******** A******
|
||||
1 | Title |
General Counsel
|
||||
1 | Telephone Number |
714-8********
|
||||
1 | Fax Number |
866-7********
|
||||
1 |
b******@dlink.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless AC1200 Dual Band Gigabit Router USB 3.0 | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output Power listed is the maximum combined average output power as indicated in the filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all. End-users must be provided transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This device is approved with the integrated Wireless AC module (FCC ID: RRK-2012070022 ). | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Sporton International Inc.
|
||||
1 | Name |
A**** C********
|
||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
a******@sporton.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | MO | 2412 | 2462 | 0.169 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15C | MO | 2422 | 2452 | 0.065 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC