FCC ID: KA2WAX582A1 Wireless AX3000 Dual-Band PCI Express Adapter

Wireless AX3000 Dual-Band PCI Express Adapter direction for use 1 1. product brief introduction It's a 2.4g and 5G dual-band WiFi 6 PCI Express card designed to increase users' need for speed in esports. PCIE X1, X4, X8, or X16 slots for desktop consoles. The motherboard needs to support PCIE V2.1Gen2 and USB2.0 interfaces. It USES Intel AX200 chip, is compatible with IEEE 802.11.b/g/ N/AC/AX, supports high performance dual channel network and full duplex communication, up to 2974Mbps transmission rate, supports Bluetooth Driver support WIN10, Linux, Chrome. 5.0 version. 2. Product packaging A WiFi6 network card;

a driver CD;

a USB cable A warranty card. 3. driver installation pin of the motherboard. 3. Boot up the computer. 1. Please plug the wireless network card into the PCI-E port of the computer. 2. Insert the USB cable into the 4PIN socket of the network card, and insert the other end into the USB 4. The "Find new Hardware Wizard" dialog box will pop up. It is suggested that you choose "Cancel".You can also select Install from list or specified location and click Next to manually install. 5. Put the cd-ROM attached to the drive into the computer drive. 6. Find the driver installation program in the CD and double-click "Setup" to install. 7. The installation program will automatically install the driver and wireless configuration software. You just need to wait and click "Next". 8. Click "Finish" to complete the driver installation. 9. This product driver only supports 64-bit systems. 2 FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this de vice may not cause harmful interference, and (2) this device must accept any inte rference received, including inte rference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's au thority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant t o part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferenc e in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not in stalled and used in accordance with the instructions, may cause harmful interference to radio communications. H owever, there is no guarantee that interference will not occur in a particular installation. If this equipment does ca use harmful interferenceto radio or television reception, which can be determined by turning the equipment off a nd on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement To comply with FCC RF exposure compliance requirements, this grant is applicable to only mobile configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. 3

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: KA2WAX582A1 LABEL AND LOCATION Wireless network card Model No.: DWA-X582 FCC ID: KA2WAX582A1

(Size: L2.0m x 1.0cm) Label Location _____________________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 1

D-Link Corporation Agent Authorization Company: D-Link Corporation Address: 17595 Mt. Herrmann, Fountain Valley, California United State 92708 Product Name: Wireless AX3000 Dual-Band PCI Express Adapter Trade Mark: D-Link Model Number: DWA-X582 FCC ID: KA2WAX582A1 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2020-10-09 Name:

Brett Adair Title:

General Counsel Company: D-Link Corporation

Dongguan tianxia zhilian Industrial co., LTD Re: Change of Identification Authorization Date: 2020-10-09 To Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD The letter grants authorization for representatives of D-Link Corporation Product Name: Wireless AX3000 Dual-Band PCI Express Adapter Trade Mark: D-Link Model: DWA-X582 FCC ID: KA2WAX582A1 to apply the FCC for a change in identification as specified under part 15.247 and 15.407 of the FCC rules This authorization applies to Original applicant: Dongguan tianxia zhilian Industrial co., LTD Original Certificate: 2AVKKGC570122 and issued Date: 09/23/2020 The equipment is electrically identical the only change being the labels on the device. The original test results continue to be representative of and applicable to the changed equipment. Note: The definition of identical should be electrically identical. Per FCC section 2.924 and 2.933, a device will be considered to be electrically identical if no changes are made to the devices schematics, board layout, component layout, chip sets, resistors and all other electrical aspects of the device are identical. Should there be any questions, please feel free to contact us. Sincerely, Name:

Date: 2020-10-09 Name:

Sheron Lou Title:

Tel:

Fax:

Business director 8617388809330 0755-82591330 E-mail:

3084236491@qq.com Company: Dongguan tianxia zhilian Industrial co., LTD NO.10, south industrial zone road, humen town, dongguan city, guangdong province China. Address:

D-Link Corporation Date 2020-10-09 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Request for 2.933 Change in identification of equipment Reference: FCC ID: KA2WAX582A1 Dear Sir/Madam, D-Link Corporation requests a Change in Identification for a currently approved device. This application will establish a new FCC ID for purpose of marketing. The original Grant for Dongguan tianxia zhilian Industrial co., LTD under FCC ID:

2AVKKGC570122 with a Grant Date of 2020-09-23 will remain in effect. An authorization letter from the original Grantee is attached. We attest that the equipment is electrically identical. Only the FCC ID, applicant, trade mark, product name and model name are different. The original test results are applicable and continue to be representative of this device. The following files are provided as attachments:

--- Cover letter giving permission from original Applicant for Change in ID

--- External photos showing no physical changes to this device

--- New FCC identification label and its location. Thanks and Best Regards, Date: 2020-10-09 Brett Adair General Counsel 714-885-6000 866-743-4589 E-mail:

Brett.adair@dlink.com Company: D-Link Corporation Name:

Name:

Title:

Tel:

Fax:

Address:

17595 Mt. Herrmann, Fountain Valley, California United State 92708

D-Link Corporation FCC Software Configuration Control Declaration Date: October 9, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product: Wireless AX3000 Dual-Band PCI Express Adapter Model No.: DWA-X582 Regarding FCC Country Code Selection guidelines identified in KDB 594280 D02 U-NII Device Security v01r03. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Brett Adair Title: General Counsel Signature of applicant Date: 2020-10-09 FCC Software Configuration Control Declaration Rev1.1

D-Link Corporation Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020-10-09 Subject; Request for Confidentiality FCC ID: KA2WAX582A1 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Declaration of Software Security Requirements For U-NII Devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Brett Adair Title: General Counsel

WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for D-Link Corporation FCC ID: KA2WAX582A1 Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels cant be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:

1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:

Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Signature:

Name / Title: Brett Adair / General Counsel Phone: 714-885-6000 Email: brett.adair@dlink.com Date: 2020-10-09 Page 1 of 1 Rev.2.0

D-Link Corporation Update declaration letter We, the undersigned hereby declare that we change FCC ID, applicant, trade mark, product name and model name. The appearance, structure, RF circuit unchanged. Original information:

FCC ID: 2AVKKGC570122 Applicant: Dongguan tianxia zhilian Industrial co., LTD Trade mark: DIEWU TXIC Product name: Wireless network card Model Name: TXA083, TXA076 Sincerely yours, Signature:

Date: 2020-10-09 Name:

Brett Adair Title:

Tel:

Fax:

General Counsel 714-885-6000 866-743-4589 E-mail:

Brett.adair@dlink.com Company: D-Link Corporation Address:

17595 Mt. Herrmann, Fountain Valley, California United State 92708