FCC ID: KA2DI524UP WIRELESS BROADBAND ROUTER

D-Link AirPlus G TM DI-524UP 802.11g/ 2.4 GHz Wireless Broadband Router with Print Server Manual Building Networks for People Contents Package Contents ................................................................................ 3 Introduction ........................................................................................... 4 Wireless Basics .................................................................................... 8 Getting Started ....................................................................................11 Using the Conguration Menu ............................................................ 12 Installing the Print Server Software .................................................... 40 Networking Basics .............................................................................. 42 Troubleshooting .................................................................................. 57 Technical Specications ..................................................................... 64 Frequently Asked Questions .............................................................. 67 Contacting Technical Support ............................................................. 95 Warranty and Registration .................................................................. 96 2 Package Contents Contents of Package:

D-Link AirPlus G DI-524UP 802.11/2.4GHz Wireless Router Power Adapter-DC 5V, 2A Manual and Warranty on CD Quick Installation Guide Ethernet Cable (All the DI-524UPs Ethernet ports are Auto-MDIX) Note: Using a power supply with a different voltage rating than the one included with the DI-524UP will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller. System Requirements for Conguration:

Ethernet-Based Cable or DSL Modem Computers with Windows, Macintosh, or Linux-based operating systems with an installed Ethernet adapter Internet Explorer Version 6.0 or Netscape Navigator Version 7.0 and Above 3 Introduction The D-Link AirPlus G DI-524UP High-Speed Wireless Router is an 802.11g high-

performance, wireless router that supports high-speed wireless networking at home, at work or in public places. Unlike most routers, the DI-524UP provides data transfers at up to 108 Mbps (compared to the standard 54 Mbps) when used with other D-Link AirPlus G products. The 802.11g standard is backwards compatible with 802.11b products. This means that you do not need to change your entire network to maintain connectivity. You may sacrice some of 802.11gs speed when you mix 802.11b and 802.11g devices, but you will not lose the ability to communicate when you incorporate the 802.11g standard into your 802.11b network. You may choose to slowly change your network by gradually replacing the 802.11b devices with 802.11g devices . In addition to offering faster data transfer speeds when used with other 802.11g products, the DI-524UP has the newest, strongest, most advanced security features available today. When used with other 802.11g WPA (WiFi Protected Access) and 802.1x compatible products in a network with a RADIUS server, the security features include:

WPA: Wi-Fi Protected Access authorizes and identies users based on a secret key that changes automatically at a regular interval. WPA uses TKIP (Temporal Key Integrity Protocol) to change the temporal key every 10,000 packets (a packet is a kind of message transmitted over a network.) This insures much greater security than the standard WEP security. (By contrast, the older WEP encryption required the keys to be changed manually.) 802.1x: Authentication is a rst line of defense against intrusion. In the Authentication process the server veries the identity of the client attempting to connect to the network. Unfamiliar clients would be denied access. For home users that will not incorporate a RADIUS server in their network, the security for the DI-524UP, used in conjunction with other 802.11g products, will still be much stronger than ever before. Utilizing the Pre Shared Key mode of WPA, the DI-524UP will obtain a new security key every time it connects to the 802.11g network. You only need to input your encryption information once in the conguration menu. No longer will you have to manually input a new WEP key frequently to ensure security, with the DI-524UP, you will automatically receive a new key every time you connect, vastly increasing the safety of your communications. 4 Connections All Ethernet Ports (WAN and LAN) are auto MDI/MDIX, meaning you can use either a straight-through or a crossover Ethernet cable. USB Printer Port Connect to the printer using a USB cable. This feature is used to share the printer on the network. Pressing the Reset Button restores the router to its original factory default settings. Auto MDI/MDIX LAN ports automatically sense the cable type when connecting to Ethernet-enabled computers. The Auto MDI/

MDIX WAN port is the connection for the Ethernet cable to the Cable or DSL modem Receptor for the Power Adapter 5 LEDs WAN LED A solid light indicates connection on the WAN port. This LED blinks during data transmission WLAN LED A solid light indicates that the wireless segment is ready. This LED blinks during wireless data transmission POWER LED A solid light indicates a proper connection to the power supply STATUS A blinking light indicates that the DI-524UP is ready LOCAL NETWORK LED A solid light indicates a connection to an Ethernet-enabled computer on ports 1-4. This LED blinks during data transmission 6 Features Fully compatible with the 802.11g standard to provide a wireless data rate of up to 54Mbps Backwards compatible with the 802.11b standard to provide a wireless data rate of up to 11Mbps WPA (Wi Fi Protected Access) authorizes and identies users based on a secret key that changes automatically at a regular interval, for example:

TKIP (Temporal Key Integrity Protocol), in conjunction with a RADIUS server, changes the temporal key every 10,000 packets, ensuring greater security Pre Shared Key mode means that the home user, without a RADIUS server, will obtain a new security key every time the he or she connects to the network, vastly improving the safety of communications on the network. 802.1x Authentication in conjunction with the RADIUS server veries the identity of would be clients Utilizes OFDM technology (Orthogonal Frequency Division Multiplexing) User-friendly conguration and diagnostic utilities Connects multiple computers to a Broadband (Cable or DSL) modem to Operates in the 2.4GHz frequency range share the Internet connection Advanced Firewall features Supports NAT with VPN pass-through, providing added security MAC Filtering IP Filtering URL Filtering Domain Blocking Scheduling DHCP server supported enables all networked computers to automatically receive IP addresses Web-based interface for Managing and Conguring Access Control to manage users on the network Supports special applications that require multiple connections Equipped with 4 10/100 Ethernet ports, 1 WAN port, Auto MDI/MDIX 7 Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. D-Link wireless products will allow you access to the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking brings. A WLAN is a cellular computer network that transmits and receives data with radio signals instead of wires. WLANs are used increasingly in both home and ofce environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efciently. Increased mobility and the absence of cabling and other xed infrastructure have proven to be benecial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. People use wireless LAN technology for many different purposes:

Mobility - Productivity increases when people have access to data in any location within the operating range of the WLAN. Management decisions based on real-time information can signicantly improve worker efciency. Low Implementation Costs WLANs are easy to set up, manage, change and relocate. Networks that frequently change can benet from WLANs ease of implementation. WLANs can operate in locations where installation of wiring may be impractical. Installation and Network Expansion - Installing a WLAN system can be fast and easy and can eliminate the need to pull cable through walls and ceilings. Wireless technology allows the network to go where wires cannot go - even outside the home or ofce. Scalability WLANs can be congured in a variety of topologies to meet the needs of specic applications and installations. Congurations are easily changed and range from peer-to-peer networks suitable for a small number of users to larger infrastructure networks to accommodate hundreds or thousands of users, depending on the number of wireless devices deployed. Inexpensive Solution - Wireless network devices are as competitively priced as conventional Ethernet network devices. 8 Wireless Basics (continued) Standards-Based Technology The DI-524UP Wireless Broadband Router utilizes the new 802.11g standard. The IEEE 802.11g standard is an extension of the 802.11b standard. It increases the data rate up to 54 Mbps within the 2.4GHz band, utilizing OFDM technology. This means that in most environments, within the specied range of this device, you will be able to transfer large les quickly or even watch a movie in MPEG format over your network without noticeable delays. This technology works by transmitting high-

speed digital data over a radio wave utilizing OFDM (Orthogonal Frequency Division Multiplexing) technology. OFDM works by splitting the radio signal into multiple smaller sub-signals that are then transmitted simultaneously at different frequencies to the receiver. OFDM reduces the amount of crosstalk (interference) in signal transmissions. The DI-524UP is backwards compatible with 802.11b devices. This means that if you have an existing 802.11b network, the devices in that network will be compatible with 802.11g devices at speeds of up to 11Mbps in the 2.4GHz range. 9 Wireless Basics (continued) Installation Considerations The D-Link AirPlus G DI-524UP lets you access your network, using a wireless connection, from virtually anywhere within its operating range. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:

1 2 3 4 Keep the number of walls and ceilings between the DI-524UP and other network devices to a minimum - each wall or ceiling can reduce your D-Link wireless products range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. Building Materials can impede the wireless signal - a solid metal door or aluminum studs may have a negative effect on range. Try to position wireless devices and computers with wireless adapters so that the signal passes through drywall or open doorways and not other materials. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate extreme RF noise. 10 Getting Started Setting up a Wireless Infrastructure Network 1 2 3 37 6 4 5 Please remember that D-Link AirPlus G wireless devices are pre-congured to connect together, right out of the box, with their default settings. For a typical wireless setup at home (as shown above), please do the following:

You will need broadband Internet access (a Cable or DSL-subscriber line into your home or ofce) Consult with your Cable or DSL provider for proper installation of the modem Connect the Cable or DSL modem to the DI-524UP Wireless Broadband Router (see the printed Quick Installation Guide included with your router.) If you are connecting a desktop computer to your network, install the D-Link AirPlus G DWL-G510 wireless PCI adapter into an available PCI slot on your desktop computer. You may also install DWL-G520+. Install the D-Link DWL-G630 wireless Cardbus adapter into a laptop computer. You may also install DWL-G650+. Install the D-Link DFE-530TX adapter into a desktop computer. The four Ethernet LAN ports of the DI-524UP are Auto MDI/MDIX and will work with both Straight-Through and Cross-Over cable. Connect your printer to the USB printer port on DI-524UP. Please refer to the quick installation quide for loading the print server software. 11 Using the Conguration Menu Whenever you want to congure your network or the DI-524UP, you can access the Conguration Menu by opening the web-browser and typing in the IP Address of the DI-524UP. The DI-524UP default IP Address is shown at right:

Open the web browser Type in the IP Address of the Router (http://192.168.0.1) Note: if you have changed the default IP Address assigned to the DI-524UP, make sure to enter the correct IP Address. Click OK Type admin in the User Name eld Leave the Password blank Home > Wizard The Home>Wizard screen will appear. Please refer to the Quick Installation Guide for more information regarding the Setup Wizard. These buttons appear on most of the conguration screens in this section. Please click on the appropriate button at the bottom of each screen after you have made a conguration change. http://192.168.0.1 http://192.168.0.1 12 Using the Conguration Menu (continued) Home > Wireless Channel-

Network ID(SSID)- Service Set Identier (SSID) is the name designated for a specic wireless local area network (WLAN). The SSIDs factory default setting is default. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. 6 is the default channel. All devices on the network must share the same channel. (Note: The wireless adapters will automatically scan and match the wireless setting.) Select None, WEP, 802.1X, WPA-PSK or WPA. None is the default setting. (Note: if you enable encryption on the DI-524UP, please make sure that you also enable encryption on all the wireless clients, or wireless connection will not be established.) Security-

WEP Encryption- Select the level of encryption desired: 64-bit, or 128-bit Key Mode-

Keys 1-4-

Select HEX or ASCII Input up to 4 WEP keys; select the one you wish to use. 13 Using the Conguration Menu (continued) Home > WAN > Dynamic IP Address Dynamic IP Address-

Host Name-

MAC Address-

Clone MAC Address-

Primary/

Secondary DNS Address-

MTU-

Choose Dynamic IP Address to obtain IP Address information automatically from your ISP. Select this option if your ISP does not give you any IP numbers to use. This option is commonly used for Cable modem services. The Host Name is optional but may be required by some ISPs. The default host name is the device name of the Router and may be changed. The default MAC Address is set to the WANs physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. The default MAC address is set to the WANs physical interface MAC address on the Broadband Router. You can use the Clone MAC Address button to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with the MAC address of the router. It is not recommended that you change the default MAC address unless required by your ISP. Enter a DNS Address if you do not wish to use the one provided by your ISP. Enter an MTU value only if required by your ISP. Otherwise, leave it a the default setting. Auto-reconnect-

Select Enabled or Disabled. 14 Using the Conguration Menu (continued) Home > WAN > Static IP Address Static IP Address-

IP Address-

Subnet Mask-

ISP Gateway Address-

Primary DNS Address-

Secondary DNS Address-

MTU-

Choose Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the elds must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format. Input the public IP Address provided by your ISP Input your Subnet mask. (All devices in the network must have the same subnet mask.) Input the public IP address of the ISP to which you are connecting Input the primary DNS (Domain Name Server) IP address provided by your ISP This is optional Enter an MTU value only if required by your ISP. Otherwise, leave it at the default setting. 15 Using the Conguration Menu (continued) Home > WAN > PPPoE Please be sure to remove any existing PPPoE client software installed on your computers. Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Select Dynamic PPPoE to obtain an IP address automatically for your PPPoE connection. Select Static PPPoE to use a static IP address for your PPPoeE connection. PPPoE-

Choose this option if your ISP uses PPPoE. (Most DSL users will select this option.) Dynamic PPPoE- receive an IP Address automatically from your ISP. Static PPPoE-you have an assigned (static) IP Address. Your PPPoE username provided by your ISP. User Name-

Retype Password- Re-enter the PPPoE password Service Name-

Enter the Service Name provided by your ISP (optional). IP Address-

Primary DNS Address-

Secondary DNS Address-

This option is only available for Static PPPoE. Enter the static IP Address for the PPPoE connection. Primary DNS IP address provided by our ISP This option is only available for Static PPPoE. Enter the static IP Address for the PPPoE connection.

(Continued on the next page) 16 Using the Conguration Menu (continued) Home > WAN > PPPoE continued MTU-

Auto-reconnect-

Maximum Transmission Unit-1492 is the default setting-you may need to change the MTU for optimal performance with your specic ISP. If enabled, the DI-524UP will automatically connect to your ISP after your system is restarted or if the PPPoE connection is dropped. Home > LAN LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DI-524UP. These settings may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet. IP Address-

The IP address of the LAN interface. The default IP address is: 192.168.0.1 The subnet mask of the LAN interface. The default subnet mask is 255.255.255.0 Subnet Mask-

Local Domain-Name- This eld is optional. Enter in the local domain name. 17 Using the Conguration Menu (continued) Home > DHCP DHCP stands for Dynamic Host Control Protocol. The DI-524UP has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to Obtain an IP Address Automatically. When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the DI-524UP. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool. DHCP Server-

Starting IP Address-

Ending IP Address-

Lease Time-

Select Enabled or Disabled. The default setting is Enabled. The starting IP address for the DHCP servers IP assignment The ending IP address for the DHCP servers IP assignment The length of time for the IP lease. Enter the Lease time. The default setting is one hour 18 Using the Conguration Menu (continued) Advanced > Virtual Server The DI-524UP can be congured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network). The DI-524UP rewall feature lters out unrecognized packets to protect your LAN network so all computers networked with the DI-524UP are invisible to the outside world. If you wish, you can make some of the LAN computers accessible from the Internet by enabling Virtual Server. Depending on the requested service, the DI-524UP redirects the external service request to the appropriate server within the LAN network. The DI-524UP is also capable of port-redirection meaning incoming trafc to a particular port may be redirected to a different port on the server computer. Each virtual service that is created will be listed at the bottom of the screen in the Virtual Servers List. There are pre-dened virtual services already in the table. You may use them by enabling them and assigning the server IP to use that particular virtual service. 19 Using the Conguration Menu (continued) Advanced > Virtual Server continued Virtual Server-

Name-

Select Enabled or Disabled Enter the name referencing the virtual service Private IP-

The server computer in the LAN (Local Area Network) that will be providing the virtual services. Protocol Type-

The protocol used for the virtual service Private Port-

The port number of the service used by the Private IP com-

Public Port-

Schedule-

Example #1:

The port number on the WAN (Wide Area Network) side that will be used to access the virtual service. The schedule of time when the virtual service will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. If it is set to Time, select the time frame for the service to be enabled. If the system time is outside of the scheduled time, the service will be disabled. If you have a Web server that you wanted Internet users to access at all times, you would need to enable it. Web

(HTTP) server is on LAN (Local Area Network) computer 192.168.0.25. HTTP uses port 80, TCP. Name: Web Server Private IP: 192.168.0.25 Protocol Type: TCP Private Port: 80 Public Port: 80 Schedule: always 20 Using the Conguration Menu (continued) Advanced > Virtual Server continued Click on this icon to edit the virtual service Click on this icon to delete the virtual service Example #2:

If you have an FTP server that you wanted Internet users to access by WAN port 2100 and only during the weekends, you would need to enable it as such. FTP server is on LAN computer 192.168.0.30. FTP uses port 21, TCP. Name: FTP Server Private IP: 192.168.0.30 Protocol Type: TCP Private Port: 21 Public Port: 2100 Schedule: From: 01:00AM to 01:00AM, Sat to Sun All Internet users who want to access this FTP Server must connect to it from port 2100. This is an example of port redirection and can be useful in cases where there are many of the same servers on the LAN network. 21 Using the Conguration Menu (continued) Advanced > Applications Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications have difculties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DI-524UP. If you need to run applications that require multiple connections, specify the port normally associated with an application in the Trigger Port eld, select the protocol type as TCP or UDP, then enter the public ports associated with the trigger port to open them for inbound trafc. The DI-524UP provides some predened applications in the table on the bottom of the web page. Select the application you want to use and enable it. Note! Only one PC can use each Special Application tunnel. Name:

Trigger Port:

This is the name referencing the special application. This is the port used to trigger the application. It can be either a single port or a range of ports. This is the protocol used to trigger the special application. Trigger Type:

Public Port:

Public Type:

This is the port number on the WAN side that will be used to access the application. You may dene a single port or a range of ports. You can use a comma to add multiple ports or port ranges. This is the protocol used for the special application. 22 Using the Conguration Menu (continued) Advanced > Filters > IP Filters Filters are used to deny or allow LAN (Local Area Network) computers from accessing the Internet. The DI-524UP can be setup to deny internal computers by their IP or MAC addresses. The DI-524UP can also block users from accessing restricted web sites. IP Filters:

IP Filter is used to deny LAN IP addresses from accessing the Internet. You can deny specic port numbers or all ports for the specic IP address. The IP address of the LAN computer that will be denied access to the Internet. The single port or port range that will be denied access to the Internet. Select the protocol type This is the schedule of time when the IP Filter will be enabled. Protocol Type:

Schedule:

Port Range:

IP Address:

23 Using the Conguration Menu (continued) Advanced > Filters > URL Blocking URL Blocking is used to deny LAN computers from accessing specic web sites by the URL. A URL is a specially formatted text string that denes a location on the Internet. If any part of the URL contains the blocked word, the site will not be accessible and the web page will not display. To use this feature, enter the text string to be blocked and click Apply. The text to be blocked will appear in the list. To delete the text, just highlight it and click Delete. Filters-

URL Blocking-

Keywords-

Select the lter you wish to use; in this case, URL Blocking was chosen. Select Enabled or Disabled. Enter the keywords in this eld. Block URLs which contain keywords listed below. 24 Using the Conguration Menu Advanced > Filters > MAC Filters

(continued) Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the Network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router. Filters-

MAC Filters-

Name-

MAC Address-

DHCP Client-

Select the lter you wish to use; in this case, MAC lters was chosen. Choose Disable MAC lters; allow MAC addresses listed below; or deny MAC addresses listed below. Enter the name here. Select a DHCP client from the pull-down list; click Clone to copy that MAC Address. Enter the MAC Address. 25 Using the Conguration Menu Advanced > Filters > Domain Blocking

(continued) Domain Blocking is used to allow or deny LAN (Local Area Network) computers from accessing specic domains on the Internet. Domain blocking will deny all requests to a specic domain such as http and ftp. It can also allow computers to access specic sites and deny all other sites. Filters-

Domain Blocking-

Disabled-

Allow-

Deny-

Blocked Domains-

Permitted Domains-

Select the lter you wish to use; in this case, Domain Block-

ing was chosen. Select Disabled to disable Domain Blocking Allows users to access all domains except Blocked Domains Denies users access to all domains except Permitted Domains Enter the Blocked Domains in this eld Enter the Permitted Domains in this eld 26 Using the Conguration Menu (continued) Advanced > Firewall Firewall Rules is an advanced feature used to deny or allow trafc from passing through the DI-524UP. It works in the same way as IP Filters with additional settings. You can create more detailed access rules for the DI-524UP. When virtual services are created and enabled, it will also display in Firewall Rules. Firewall Rules contain all network rewall rules pertaining to IP (Internet Protocol). In the Firewall Rules List at the bottom of the screen, the priorities of the rules are from top (highest priority) to bottom (lowest priority.) Enable or disable the Firewall Enter the name Note:

The DI-524UP MAC Address ltering rules have precedence over the Firewall Rules. Firewall Rules-

Name-

Action-

Source-

Destination-

Allow or Deny Enter the IP Address range Enter the IP Address range; the Protocol;

and the Port Range Schedule-

Select Always or enter the Time Range. 27 Using the Conguration Menu (continued) Advanced > DDNS Select from the list of DDNS servers available. Users who have a Dynamic DDNS account may use this feature on the DI-524UP. Provider-

Host Name-

Enter your DDNS account host name. Username/Email- Enter your DDNS account username. Password/Key-

Enter your DDNS account password. 28 Using the Conguration Menu (continued) Advanced > DMZ If you have a client PC that cannot run Internet applications properly from behind the DI-524UP, then you can set the client up for unrestricted Internet access. It allows a computer to be exposed to the Internet. This feature is useful for gaming purposes. Enter the IP address of the internal computer that will be the DMZ host. Adding a client to the DMZ (Demilitarized Zone) may expose your local network to a variety of security risks, so only use this option as a last resort. DMZ-

Enable or Disable the DMZ. The DMZ (Demilitarized Zone) allows a single computer to be exposed to the internet. By default the DMZ is disabled. IP Address-

Enter the IP Address of the computer to be in the DMZ 29 Using the Conguration Menu (continued) Advanced > Performance Beacon Interval-

RTS Threshold-

Fragmentation-

DTIM Interval-

Wireless Mode-

TX Rates-

SSID Broadcast-

Beacons are packets sent by an Access Point to synchronize a wireless network. Specify a value. 100 is the default setting and is recommended. This value should remain at its default setting of 2432. If incon-

sistent data ow is a problem, only a minor modication should be made. The fragmentation threshold, which is specied in bytes, deter-

mines whether packets will be fragmented. Packets exceeding the 2346 byte setting will be fragmented before transmis-

sion.2346 is the default setting

(Delivery Trafc Indication Message) 3 is the default setting. A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. Select Short or Long Preamble. The Preamble denes the length of the CRC block (Cyclic Redundancy Check is a com-

mon technique for detecting data transmission errors) for communication between the wireless router and the roaming wireless network adapters. Note: High network trafc areas should use the shorter preamble type. Auto is the default selection. Selct from the drop down menu. Choose Enabled to broadcast the SSID across the network. All devices on a network must share the same SSID (Service Set Identier) to establish communication. Choose Disabled if you do not wish to broadcast the SSID over the network. 30 Using the Conguration Menu (continued) Tools> Admin admin is the Administrator login name Enter the password and enter again to conrm user is the User login name Enter the password and enter again to conrm At this page, the DI-524UP administrator can change the system password. There are two accounts that can access the Broadband Routers Web-Management interface. They are admin and user. Admin has read/write access while user has read-only ac-

cess. User can only view the settings but cannot make any changes. Administrator-

Password-

User-

Password-

Remote Management- Remote management allows the DI-524UP to be congured from the Internet by a web browser. A username and password is still required to ac-

cess the Web-Management interface. In general, only a member of your network can browse the built-in web pages to perform Administrator tasks. This feature enables you to perform Administrator tasks from the remote (Internet) host. IP Address- The Internet IP address of the computer that has access to the Broad-

band Router. If you input an asterisk (*) into this eld, then any computer will be able to access the Router. Putting an asterisk (*) into this eld would present a security risk and is not recommended. Port- The port number used to access the Broadband Router. Example- http://x.x.x.x:8080 where x.x.x.x is the WAN IP address of the Broadband Router and 8080 is the port used for the Web-Mangement interface. 31 Using the Conguration Menu (continued) Tools > Time Default NTP Server-

Time Zone-

NTP is short for Network Time Protocol. NTP synchronizes computer clock times in a network of computers. This eld is optional. Set Device Date and Time: To manually input the time. Enter the values in these elds for the Year, Month, Day, Hour, Minute, and Second. Set the Time-

To manually input the time, enter the values in these elds for the Year, Month, Day, Hour, Minute, and Second. Click Set Time. Daylight Saving-

To select Daylight Saving time manually, select enabled or disabled, and enter a start date and an end date for daylight saving time. 32 Using the Conguration Menu (continued) Tools > System The current system settings can be saved as a le onto the local hard drive. The saved le or any other saved setting le can be loaded back on the Broadband Router. To reload a system settings le, click on Browse to browse the local hard drive and locate the system le to be used. You may also reset the Broadband Router back to factory settings by clicking on Restore. Save Settings to Local Hard Drive-

Click Save to save the current settings to the local Hard Drive Load Settings from Local Hard Drive-

Click Browse to nd the settings, then click Load Restore to Factory Default Settings- Click Restore to restore the factory default settings 33 Using the Conguration Menu (continued) Tools > Firmware You can upgrade the rmware of the Router here. Make sure the rmware you want to use is on the local hard drive of the computer. Click on Browse to browse the local hard drive and locate the rmware to be used for the update. Please check the D-Link support site for rmware updates at http://support.dlink.com. You can download rmware upgrades to your hard drive from the D-Link support site. Firmware Upgrade-

Click on the link in this screen to nd out if there is an up-

dated rmware; if so, download the new rmware to your hard Browse-

After you have downloaded the new rmware, click Browse in this window to locate the rmware update on your hard drive. Click Apply to complete the rmware upgrade. 34 Using the Conguration Menu (continued) Tools > Misc Ping Test-

The Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP Address that you wish to Ping, and click Ping Restart Device-

Block WAN Ping-

UPNP-

VPN Pass Through-

Click Reboot to restart the DI-524UP If you choose to block WAN Ping, the WAN IP Address of the DI-524UP will not respond to pings. Blocking the Ping may provide some extra security from hackers. Discard Ping from WAN side-

Click Enabled to block the WAN ping To use the Universal Plug and Play feature click on Enabled. UPNP pro-

vides compatibility with networking equipment, software and peripherals of the over 400 vendors that cooperate in the Plug and Play forum. The DI-524UP supports VPN (Virtual Private Network) pass-through for both PPTP (Point-to-Point Tunneling Protocol) and IPSec (IP Se-

curity). Once VPN pass-through is enabled, there is no need to open up virtual services. Multiple VPN connections can be made through the DI-524UP. This is useful when you have many VPN clients on the LAN network. PPTP- select Enabled or Disabled IPSec- select Enabled or Disabled 35 Using the Conguration Menu (continued) Status > Device Info This page displays the current information for the DI-524UP. It will display the LAN, WAN and MAC address information. If your WAN connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP. If your WAN connection is set up for PPPoE, a Connect button and a Disconnect but-

ton will be displayed. Use Disconnect to drop the PPPoE connection and use Connect to establish the PPPoE connection. This window will show the DI-524UPs working status:

WAN LAN Wireless IP Address: WAN/Public IP Address Subnet Mask: WAN/Public Subnet Mask Gateway: WAN/Public Gateway IP Address Domain Name Server: WAN/Public DNS IP Address WAN Status: WAN Connection Status IP Address: LAN/Private IP Address of the DI-524UP Subnet Mask: LAN/Private Subnet Mask of the DI-524UP MAC Address: Displays the MAC address SSID: Displays the current SSID Channel: Displays the current channel WEP: indicates whether WEP is enabled or disabled 36 Using the Conguration Menu (continued) Status > Log The Broadband Router keeps a running log of events and activities occurring on the Router. If the device is rebooted, the logs are automatically cleared. You may save the log les under Log Settings. View Log-

First Page - The rst page of the log Last Page - The last page of the log Previous - Moves back one log page Next - Moves forward one log page Clear - Clears the logs completely Log Settings - Brings up the page to congure the log 37 Using the Conguration Menu (continued) Status > Log > Log Settings Not only does the Broadband Router display the logs of activities and events, it can setup to send these logs to another location. SMTP Server/

IP Address -

Email Address -

The address of the SMTP server that will be used to send the logs The email address to which the logs will be sent. Click on Send Mail Now to send the email. 38 Using the Conguration Menu (continued) Status > Stats The screen above displays theTrafc Statistics. Here you can view the amount of pack-

ets that pass through the DI-524UP on both the WAN and the LAN ports. The trafc counter will reset if the device is rebooted. Status > Active Sessions The Active Session page displays the full details of active sessions to your page. 39 Installing the print Server Software 40 Installing the print Server Software (continued) Select the destination folder. Click Next Then, the setup program will begin to install the programs into the destination folder. When the following window is displayed. Click Finish Click OK 41 Networking Basics Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsoft Windows XP. Note: Please refer to websites such as http://www.homenethelp.com and http://www.microsoft.com/windows2000 for information about networking computers using Windows 2000, ME or 98. Go to Start>Control Panel>Network Connections Select Set up a home or small ofce network When this screen appears, Click Next. 42 Networking Basics Please follow all the instructions in this window:

Click Next In the following window, select the best description of your computer. If your computer connects to the internet through a gateway/router, select the second option as shown. Click Next 43 Networking Basics Enter a Computer description and a Computer name (optional.) Click Next Enter a Workgroup name. All computers on your network should have the same Workgroup name. Click Next 44 Networking Basics Please wait while the Network Setup Wizard applies the changes. When the changes are complete, click Next. Please wait while the Network Setup Wizard congures the computer. This may take a few minutes. 45 Networking Basics In the window below, select the option that ts your needs. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. Click Next. Insert a disk into the Floppy Disk Drive, in this case drive A. Click Next. 46 Networking Basics Please read the information under Heres how in the screen below. After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. To continue click Next. 47 Networking Basics Please read the information on this screen, then click Finish to complete the Network Setup Wizard. The new settings will take effect when you restart the computer. Click Yes to restart the computer. You have completed conguring this computer. Next, you will need to run the Network Setup Disk on all the other computers on your network. After running the Network Setup Disk on all your computers, your new wireless network will be ready to use. 48 Networking Basics Naming your Computer To name your computer, please follow these directions:In Windows XP:

Click Start (in the lower left corner of the screen) Right-click on My Computer Select Properties and click Select the Computer Name Tab in the System Properties window. You may enter a Computer Description if you wish; this eld is optional. To rename the computer and join a domain, Click Change. 49

Networking Basics Naming your Computer In this window, enter the Computer name Select Workgroup and enter the name of the Workgroup All computers on your network must have the same Workgroup name. Click OK Checking the IP Address in Windows XP The wireless adapter-equipped computers in your network must be in the same IP Ad-

dress range (see Getting Started in this manual for a denition of IP Address Range.) To check on the IP Address of the adapter, please do the following:

Right-click on the Local Area Connection icon in the task bar Click on Status 50 Networking Basics Checking the IP Address in Windows XP This window will appear. Click the Support tab Click Close Assigning a Static IP Address in Windows XP/2000 Note: Residential Gateways/Broadband Routers will automatically assign IP Addresses to the computers on the network, using DHCP (Dynamic Host Conguration Protocol) technology. If you are using a DHCP-capable Gateway/Router you will not need to assign Static IP Addresses. If you are not using a DHCP capable Gateway/Router, or you need to assign a Static IP Address, please follow these instructions:

Go to Start Double-click on Control Panel 51 Networking Basics Assigning a Static IP Address in Windows XP/2000 Double-click on Network Connections Right-click on Local Area Connections Double-click on Properties 52 Networking Basics Assigning a Static IP Address in Windows XP/2000 Click on Internet Protocol

(TCP/IP) Click Properties Input your IP address and subnet mask. (The IP Addresses on your network must be within the same range. For example, if one computer has an IP Address of 192.168.0.2, the other computers should have IP Addresses that are sequential, like 192.168.0.3 and 192.168.0.4. The subnet mask must be the same for all the computers on the network.) Input your DNS server addresses. (Note: If you are entering a DNS server, you must enter the IP Address of the Default Gateway.) The DNS server information will be supplied by your ISP (Internet Service Provider.) Click OK 53 Networking Basics Assigning a Static IP Address with Macintosh OSX Go to the Apple Menu and select System Preferences cClick on Network Select Built-in Ethernet in the Show pull-down menu Select Manually in the Congure pull-down menu Input the Static IP Address, the Subnet Mask and the Router IP Address in the appropriate elds Click Apply Now 54 Networking Basics Selecting a Dynamic IP Address with Macintosh OSX Go to the Apple Menu and select System Preferences Click on Network Select Built-in Ethernet in the Show pull-down menu Select Using DHCP in the Congure pull-down menu Click Apply Now The IP Address, Subnet mask, and the Routers IP Address will appear in a few seconds 55 Networking Basics Checking the Wireless Connection by Pinging in Windows XP and 2000 Go to Start > Run >

type cmd. A window similar to this one will appear. Type ping xxx.xxx.xxx. xxx, where xxx is the IP Address of the Wireless Router or Access Point. A good wireless connection will show four replies from the Wireless Router or Acess Point, as shown. Checking the Wireless Connection by Pinging in Windows Me and 98 Go to Start > Run

> type command. A window similar to this will appear. Type ping xxx.xxx. xxx.xxx where xxx is the IP Address of the Wireless Router or Access Point. A good wireless connection will show four replies from the wireless router or access point, as shown. 56 Troubleshooting This Chapter provides solutions to problems that can occur during the installation and operation of the DI-524UP Wireless Broadband Router. We cover various aspects of the network setup, including the network adapters. Please read the following if you are having problems. Note: It is recommended that you use an Ethernet connection to congure the DI-524UP Wireless Broadband Router. 1. The computer used to congure the DI-524UP cannot access the Conguration menu. Check that the Ethernet LED on the DI-524UP is ON. If the LED is not ON, check that the cable for the Ethernet connection is securely inserted. Check that the Ethernet Adapter is working properly. Please see item 3 (Check that the drivers for the network adapters are installed properly) in this Troubleshooting section to check that the drivers are loaded properly. Check that the IP Address is in the same range and subnet as the DI-524UP. Please see Checking the IP Address in Windows XP in the Networking Basics section of this manual. Note: The IP Address of the DI-524UP is 192.168.0.1. All the computers on the network must have a unique IP Address in the same range, e.g., 192.168.0.x. Any computers that have identical IP Addresses will not be visible on the network. They must all have the same subnet mask, e.g., 255.255.255.0 Do a Ping test to make sure that the DI-524UP is responding. Go to Start>Run>Type Command>Type ping 192.168.0.1. A successful ping will show four replies. Note: If you have changed the default IP Address, make sure to ping the correct IP Ad-

dress assigned to the DI-524UP. 57 Troubleshooting 2. The wireless client cannot access the Internet in the Infrastructure mode. Make sure the wireless client is associated and joined with the correct Access Point. To check this connection: Right-click on the Local Area Connection icon in the taskbar> select View Available Wireless Networks. The Connect to Wireless Network screen will appear. Please make sure you have selected the correct available network, as shown in the illustrations below. Check that the IP Address assigned to the wireless adapter is within the same IP Address range as the access point and gateway. (Since the DI-524UP has an IP Address of 192.168.0.1, wireless adapters must have an IP Address in the same range, e.g., 192.168.0.x. Each device must have a unique IP Address; no two devices may have the same IP Address. The subnet mask must be the same for all the computers on the network.) To check the IP Address assigned to the wireless adapter, double-click on the Local Area Connection icon in the taskbar >

select the Support tab and the IP Address will be displayed. (Please refer to Checking the IP Address in the Networking Basics section of this manual.) If it is necessary to assign a Static IP Address to the wireless adapter, please refer to the appropriate section in Networking Basics. If you are entering a DNS Server address you must also enter the Default Gateway Address. (Remember that if you have a DHCP-capable router, you will not need to assign a Static IP Address. See Networking Basics: Assigning a Static IP Address.) 58 Troubleshooting 3. Check that the drivers for the network adapters are installed properly. You may be using different network adapters than those illustrated here, but this procedure will remain the same, regardless of the type of network adapters you are using. Go to Start >

My Computer >

Properties Select the Hardware Tab Click Device Manager 59 Troubleshooting Double-click on Network Adapters Right-click on D-Link AirPlus DWL-G650 Wireless Cardbus Adapter (In this example we use the DWL-G650;

you may be using other network adapters, but the procedure will remain the same.) Select Properties to check that the drivers are installed properly Look under Device Status to check that the device is working properly Click OK D-Link AirPlus DWL-G650 D-Link AirPlus DWL-G650 Wireless Cardbus Adapter D-Link AirPlus DWL-G650 Wireless Cardbus Adapter 60 Troubleshooting 4. What variables may cause my wireless products to lose reception?

D-Link products let you access your network from virtually anywhere you want. However, the positioning of the products within your environment will affect the wireless range. Please refer to Installation Considerations in the Wireless Basics section of this manual for further information about the most advantageous placement of your D-Link wireless products. 5. Why does my wireless connection keep dropping?

Antenna Orientation- Try different antenna orientations for the DI-524UP. Try to keep the antenna at least 6 inches away from the wall or other objects. If you are using 2.4GHz cordless phones, X-10 equipment or other home security systems, ceiling fans, and lights, your wireless connection will degrade dramatically or drop altogether. Try changing the Channel on your Router, Access Point and Wireless adapter to a different Channel to avoid interference. Keep your product away (at least 3-6 feet) from electrical devices that generate RF noise, like microwaves, Monitors, electric motors, etc. 6. Why cant I get a wireless connection?

If you have enabled Encryption on the DI-524UP, you must also enable encryption on all wireless clients in order to establish a wireless connection. For 802.11b, the Encryption settings are: 64, 128, or 256 bit. Make sure that the encryption bit level is the same on the Router and the Wireless Client. Make sure that the SSID on the Router and the Wireless Client are exactly the same. If they are not, wireless connection will not be established. Move the DI-524UP and the wireless client into the same room and then test the wireless connection. Disable all security settings. (WEP, MAC Address Control) 61 Troubleshooting 6. Why cant I get a wireless connection? (continued) Turn off your DI-524UP and the client. Turn the DI-524UP back on again, and then turn on the client. Make sure that all devices are set to Infrastructure mode. Check that the LED indicators are indicating normal activity. If not, check that the AC power and Ethernet cables are rmly connected. Check that the IP Address, subnet mask, gateway and DNS settings are cor-

rectly entered for the network. If you are using 2.4GHz cordless phones, X-10 equipment or other home se-

curity systems, ceiling fans, and lights, your wireless connection will degrade dramatically or drop altogether. Try changing the Channel on your DI-524UP, and on all the devices in your network to avoid interference. Keep your product away (at least 3-6 feet) from electrical devices that generate RF noise, like microwaves, Monitors, electric motors, etc. 7. I forgot my encryption key. Reset the DI-524UP to its factory default settings and restore the other devices on your network to their default settings. You may do this by pressing the Reset button on the back of the unit. You will lose the current conguration settings. 62 Troubleshooting 8. Resetting the DI-524UP to Factory Default Settings After you have tried other methods for troubleshooting your network, you may choose to Reset the DI-524UP to the factory default settings. Remember that D-Link AirPro products network together, out of the box, at the factory default settings. To hard-reset the DI-524UP to Factory Default Settings, please do the following:

Locate the Reset button on the back of the DI-524UP Use a paper clip to press the Reset button Hold for about 10 seconds and then release After the DI-524UP reboots (this may take a few min-

utes) it will be reset to the factory Default settings 63 Technical Specications Standards IEEE 802.11g IEEE 802.11b IEEE 802.3 IEEE 802.3u VPN Pass Through/ Multi-Sessions PPTP L2TP IPSec Device Management Web-Based- Internet Explorer v6 or later; Netscape Navigator v7 or later; or other Java-enabled browsers DHCP Server and Client Advanced Firewall Features NAT with VPN Passthrough (Network Address Translation) MAC Filtering IP Filtering URL Filtering Domain Blocking Scheduling Indoors up to 328 feet (100 meters) Outdoors up to 984 feet (300 meters) Operating Temperature 32F to 131F (0C to 55C) Humidity:

95% maximum (non-condensing) Safety and Emissions:

FCC, CE Wireless Frequency Range:

2.4GHz to 2.462GHz 64 Technical Specications LEDs:

Power WAN LAN (10/100) WLAN (Wireless Connection) Physical Dimensions:

L = 5.6 inches (142mm) W = 4.3 inches (109mm) H = 1.2 inches (31mm) Wireless Transmit Power:

14dBm Security:

802.1x WEP WPA WPA-PSK External Antenna Type:

Single detachable reverse SMA Modulation Technology:

Orthogonal Frequency Division Multiplexing (OFDM) Power Input:

Ext. Power Supply DC 5V, 2A Weight:

0.44 lbs. (200g) Warranty:

1 year 65 Technical Specications Wireless Data Rates with Automatic Fallback:

54 Mbps 48 Mbps 36 Mbps 24 Mbps 18 Mbps 12 Mbps 11 Mbps 9 Mbps 6 Mbps 5.5 Mbps 2 Mbps 1 Mbps Receiver Sensitivity:

54Mbps OFDM, 10% PER, -68dBm 48Mbps OFDM, 10% PER, -68dBm 36Mbps OFDM, 10% PER, -75dBm 24Mbps OFDM, 10% PER, -79dBm 18Mbps OFDM, 10% PER, -82dBm 12Mbps OFDM, 10% PER, -84dBm 11Mbps CCK, 8% PER, -82dBm 9Mbps OFDM, 10% PER, -87dBm 6Mbps OFDM, 10% PER, -88dBm 5.5Mbps CCK, 8% PER, -85dBm 2Mbps QPSK, 8% PER, -86dBm 1Mbps BPSK, 8% PER, -89dBm 66 Frequently Asked Questions Why cant I access the web based conguration?

When entering the IP Address of the DI-524UP (192.168.0.1), you are not connecting to the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. To resolve difculties accessing a web utility, please follow the steps below. Step 1 Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on. What type of cable should I be using?

The following connections require a Crossover Cable:

Computer to Computer Computer to Uplink Port Computer to Access Point Computer to Print Server Computer/XBOX/PS2 to DWL-810 Computer/XBOX/PS2 to DWL-900AP+

Uplink Port to Uplink Port (hub/switch) Normal Port to Normal Port (hub/switch) The following connections require a Straight-through Cable:

Computer to Residential Gateway/Router Computer to Normal Port (hub/switch) Access Point to Normal Port (hub/switch) Print Server to Normal Port (hub/switch) Uplink Port to Normal Port (hub/switch) Rule of Thumb:

If there is a link light, the cable is right. 67 Frequently Asked Questions (continued) Why cant I access the web based conguration? (continued) What type of cable should I be using? (continued) Whats the difference between a crossover cable and a straight-through cable?

The wiring in crossover and straight-through cables are different. The two types of cable have different purposes for different LAN congurations. EIA/TIA 568A/568B dene the wiring standards and allow for two different wiring color codes as illustrated in the following diagram.

*The wires with colored backgrounds may have white stripes and may be denoted that way in diagrams found elsewhere. How to tell straight-through cable from a crossover cable:

The main way to tell the difference between the two cable types is to compare the wiring order on the ends of the cable. If the wiring is the same on both sides, it is straight-through cable. If one side has opposite wiring, it is a crossover cable. All you need to remember to properly congure the cables is the pinout order of the two cable ends and the following rules:

A straight-through cable has identical ends A crossover cable has different ends It makes no functional difference which standard you follow for straight-through cable ends, as long as both ends are the same. You can start a crossover cable with either standard as long as the other end is the other standard. It makes no functional difference which end is which. The order in which you pin the cable is important. Using a pattern other than what is specied in the above diagram could cause connection problems. When to use a crossover cable and when to use a straight-through cable:

Computer to Computer Crossover Computer to an normal port on a Hub/Switch Straight-through Computer to an uplink port on a Hub/Switch - Crossover Hub/Switch uplink port to another Hub/Switch uplink port Crossover Hub/Switch uplink port to another Hub/Switch normal port - Straight-through 68 Frequently Asked Questions (continued) Why cant I access the web based conguration? (continued) Step 2 Disable any Internet security software running on the computer. Software rewalls like Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, etc. might block access to the conguration pages. Check the help les included with your rewall software for more information on disabling or conguring it. Step 3 Congure your Internet settings. Go to Start>Settings>Control Panel. Double click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults. Click to the Connection tab and set the dial-

up option to Never Dial a Connection. Click the LAN Settings button Nothing should be checked. Click OK Go to the Advanced tab and click the button to restore these settings to their defaults Click OK. Go to the desktop and close any open windows 69 Frequently Asked Questions (continued) Why cant I access the web based conguration? (continued) Step 4 Check your IP Address. Your computer must have an IP Address in the same range of the device you are attempting to congure. Most D-Link devices use the 192.168.0.X range. How can I nd my IP Address in Windows 95, 98, or ME?

Step 1 Click on Start, then click on Run. Step 2 The Run Dialogue Box will appear. Type winipcfg in the window as shown then click OK. Step 3 The IP Conguration window will appear, displaying your Ethernet Adapter Information. Select your adapter from the drop down menu. If you do not see your adapter in the drop down menu, your adapter is not properly installed. Step 4 After selecting your adapter, it will display your IP Address, subnet mask, and default gateway. Step 5 Click OK to close the IP Conguration window 70 Frequently Asked Questions (continued) Why cant I access the web based conguration? (continued) Step 4 (continued) Check your IP Address. Your computer must have an IP Address in the same range of the device you are attempting to congure. Most D-Link devices use the 192.168.0.X range. How can I nd my IP Address in Windows 2000/XP?

Step 1 Click on Start and select Run. Step 2 Type cmd then click OK. Step 3 From the Command Prompt, enter ipcong. It will return your IP Address, subnet mask, and default gateway Step 4 Type exit to close the command prompt. 71 Frequently Asked Questions (continued) Why cant I access the web based conguration? (continued) Step 4 (continued) Check your IP Address. Your computer must have an IP Address in the same range of the device you are attempting to congure. Most D-

Link devices use the 192.168.0.X range. Make sure you take note of your computers Default Gateway IP Address. The Default Gateway is the IP Address of the D-Link router. By default, it should be 192.168.0.1. How can I assign a Static IP Address in Windows XP?

Step 1 Click on Start > Control Panel > Network and Internet Connections >

Network connections. Step 2 See Step 2 for Windows 2000 and continue from there. How can I assign a Static IP Address in Windows 2000?

Step 1 Right-click on My Network Places and select Properties. Step 2 Right-click on the Local Area Connection which represents your network card and select Properties. Highlight Internet Protocol (TCP/

IP) and click Properties. 72 Frequently Asked Questions (continued) Why cant I access the web based conguration? (continued) How can I assign a Static IP Address in Windows 2000? (continued) Click Use the following IP Address and enter an IP Address that is on the same subnet as the LAN IP Address on your router. Example: If the routers LAN IP Address is 192.168.0.1, make your IP Address 192.168.0.X where X = 2-99. Make sure that the number you choose is not in use on the network. Set the Default Gateway to be the same as the LAN IP Address of your router (192.168.0.1). Set the Primary DNS to be the same as the LAN IP address of your router

(192.168.0.1). The Secondary DNS is not needed or enter a DNS server from your ISP. Click OK twice. You may be asked if you want to reboot your computer. Click Yes. How can I assign a Static IP Address in Windows 98/Me?

Step 1 From the desktop, right-click on the Network Neigborhood icon (Win ME - My Network Places) and select Properties Highlight TCP/IP and click the Properties button. If you have more than 1 adapter, then there will be a TCP/IP Binding for each adapter. Highlight TCP/IP >

(your network adapter) and then click Properties. 73 Frequently Asked Questions (continued) Why cant I access the web based conguration? (continued) How can I assign a Static IP Address in Windows 98/Me? (continued) Step 2 Click Specify an IP Address. Enter in an IP Address that is on the same subnet as the LAN IP Address on your router. Example: If the routers LAN IP Address is 192.168.0.1, make your IP Address 192.168.0.X where X is between 2-99. Make sure that the number you choose is not in use on the network. Step 3 Click on the Gateway tab. Enter the LAN IP Address of your router here (192.168.0.1). Click Add when nished. Step 4 Click on the DNS Conguration tab. Click Enable DNS. Type in a Host (can be any word). Under DNS server search order, enter the LAN IP Address of your router (192.168.0.1). Click Add. Step 5 Click OK twice. When prompted to reboot your computer, click Yes. After you reboot, the computer will now have a static, private IP Address. Step 5 Access the web management. Open your web browser and enter the IP Address of your D-Link device in the address bar. This should open the login page for the web management. Follow instructions to login and complete the conguration. 74 Frequently Asked Questions (continued) How can I setup my router to work with a Cable modem connection?

(IE AT&T-BI, Cox, Adelphia, Rogers, Roadrunner, Charter, and Comcast). Dynamic Cable connection Note: Please congure the router with the computer that was last connected directly to the cable modem. Step 1 Log into the web based conguration by typing in the IP Address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank (nothing). Step 2 Click the Home tab and click the WAN button. Dynamic IP Address is the default value, however, if Dynamic IP Address is not selected as the WAN type, select Dynamic IP Address by clicking on the radio button. Click Clone Mac Address. Click on Apply and then Continue to save the changes. 75 Frequently Asked Questions (continued) How can I setup my router to work with a Cable modem connection?

(continued) Step 3 Power cycle the cable modem and router:

Turn the cable modem off (rst) . Turn the router off Leave them off for 2 minutes.**

Turn the cable modem on (rst). Wait until you get a solid cable light on the cable modem. Turn the router on. Wait 30 seconds.

** If you have a Motorola (Surf Board) modem, leave off for at least 5 minutes. Step 4 Follow step 1 again and log back into the web conguration. Click the Status tab and click the Device Info button. If you do not already have a public IP Address under the WAN heading, click on the DHCP Renew and Continue buttons. Static Cable Connection Step 1 Log into the web based conguration by typing in the IP Address of the router

(default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank (nothing). Step 2 Click the Home tab and click the WAN button. Select Static IP Address and enter your static settings obtained from the ISP in the elds provided. If you do not know your settings, you must contact your ISP. Step 3 Click on Apply and then click Continue to save the changes. Step 4 Click the Status tab and click the Device Info button. Your IP Address information will be displayed under the WAN heading. 76 Frequently Asked Questions (continued) How can I setup my router to work with Earthlink DSL or any PPPoE connection?

Make sure you disable or uninstall any PPPoE software such as WinPoet or Enternet 300 from your computer or you will not be able to connect to the Internet. Step 1 Upgrade Firmware if needed.

(Please visit the D-Link tech support website at: http://support.dlink.com for the latest rmware upgrade information.) Step 2 Take a paperclip and perform a hard reset. With the unit on, use a paperclip and hold down the reset button on the back of the unit for 10 seconds. Release it and the router will recycle, the lights will blink, and then stabilize. Step 3 After the router stabilizes, open your browser and enter 192.168.0.1 into the address window and hit the Enter key. When the password dialog box appears, enter the username admin and leave the password blank. Click OK. If the password dialog box does not come up repeat Step 2. Note: Do not run Wizard. Step 4 Click on the WAN tab on left-hand side of the screen. Select PPPoE. Step 5 Select Dynamic PPPoE (unless your ISP supplied you with a static IP Address). Step 6 In the username eld enter ELN/username@earthlink.net and your password, where username is your own username. For SBC Global users, enter username@sbcglobal.net. For Ameritech users, enter username@ameritech.net. For BellSouth users, enter username@bellsouth.net. For Mindspring users, enter username@mindspring.com. For most other ISPs, enter username. Step 7 Maximum Idle Time should be set to zero. Set MTU to 1492, unless specied by your ISP, and set Autoreconnect to Enabled. Note: If you experience problems accessing certain websites and/or email issues, please set the MTU to a lower number such as 1472, 1452, etc. Contact your ISP for more information and the proper MTU setting for your connection. 77 Frequently Asked Questions (continued) How can I setup my router to work with Earthlink DSL or any PPPoE connection? (continued) Step 8 Click Apply. When prompted, click Continue. Once the screen refreshes, unplug the power to the D-Link router. Step 9 Turn off your DSL modem for 2-3 minutes. Turn back on. Once the modem has established a link to your ISP, plug the power back into the D-Link router. Wait about 30 seconds and log back into the router. Step 10 Click on the Status tab in the web conguration where you can view the device info. Under WAN, click Connect. Click Continue when prompted. You should now see that the device info will show an IP Address, verifying that the device has connected to a server and has been assigned an IP Address. Can I use my D-Link Broadband Router to share my Internet connection provided by AOL DSL Plus?

In most cases yes. AOL DSL+ may use PPPoE for authentication bypassing the client software. If this is the case, then our routers will work with this service. Please contact AOL if you are not sure. To set up your router:

Step 1 Log into the web-based conguration (192.168.0.1) and congure the WAN side to use PPPoE. Step 2 Enter your screen name followed by @aol.com for the user name. Enter your AOL password in the password box. Step 3 You will have to set the MTU to 1400. AOL DSL does not allow for anything higher than 1400. Step 4 Apply settings. Step 5 Recycle the power to the modem for 1 minute and then recycle power to the router. Allow 1 to 2 minutes to connect. If you connect to the Internet with a different internet service provider and want to use the AOL software, you can do that without conguring the routers rewall settings. You need to congure the AOL software to connect using TCP/IP. Go to http://www.aol.com for more specic conguration information of their software. 78 Frequently Asked Questions (continued) How do I open ports on my router?

To allow trafc from the internet to enter your local network, you will need to open up ports or the router will block the request. Step 1 Open your web browser and enter the IP Address of your D-Link router

(192.168.0.1). Enter username

(admin) and your password

(blank by default). Step 2 Click on Advanced on top and then click Virtual Server on the left side. Step 3 Check Enabled to activate entry. Step 4 Enter a name for your virtual server entry. Step 5 Next to Private IP, enter the IP Address of the computer on your local network that you want to allow the incoming service to. Step 6 Choose Protocol Type - either TCP, UDP, or both. If you are not sure, select both. Step 7 Enter the port information next to Private Port and Public Port. The private and public ports are usually the same. The public port is the port seen from the WAN side, and the private port is the port being used by the application on the computer within your local network. Step 8 Enter the Schedule information. Step 9 Click Apply and then click Continue. Note: Make sure DMZ host is disabled. If DMZ is enabled, it will disable all Virtual Server entries. Because our routers use NAT (Network Address Translation), you can only open a specic port to one computer at a time. For example: If you have 2 web servers on your network, you cannot open port 80 to both computers. You will need to congure 1 of the web servers to use port 81. Now you can open port 80 to the rst computer and then open port 81 to the other computer. 79 Frequently Asked Questions (continued) What is DMZ?

Demilitarized Zone:

In computer networks, a DMZ (demilitarized zone) is a computer host or small network inserted as a neutral zone between a companys private network and the outside public network. It prevents outside users from getting direct access to a server that has company data. (The term comes from the geographic buffer zone that was set up between North Korea and South Korea following the UN police action in the early 1950s.) A DMZ is an optional and more secure approach to a rewall and effectively acts as a proxy server as well. In a typical DMZ conguration for a small company, a separate computer (or host in network terms) receives requests from users within the private network for access to Web sites or other companies accessible on the public network. The DMZ host then initiates sessions for these requests on the public network. However, the DMZ host is not able to initiate a session back into the private network. It can only forward packets that have already been requested. Users of the public network outside the company can access only the DMZ host. The DMZ may typically also have the companys Web pages so these could be served to the outside world. However, the DMZ provides access to no other company data. In the event that an outside user penetrated the DMZ hosts security, the Web pages might be corrupted but no other company information would be exposed. D-Link, a leading maker of routers, is one company that sells products designed for setting up a DMZ How do I congure the DMZ Host?

The DMZ feature allows you to forward all incoming ports to one computer on the local network. The DMZ, or Demilitarized Zone, will allow the specied computer to be exposed to the Internet. DMZ is useful when a certain application or game does not work through the rewall. The computer that is congured for DMZ will be completely vulnerable on the Internet, so it is suggested that you try opening ports from the Virtual Server or Firewall settings before using DMZ. Step 1 Find the IP address of the computer you want to use as the DMZ host. To nd out how to locate the IP Address of the computer in Windows XP/2000/ME/9x or Macintosh operating systems please refer to Step 4 of the rst question in this section (Frequently Asked Questions). 80 Frequently Asked Questions (continued) How do I congure the DMZ Host? (continued) Step 2 Log into the web based conguration of the router by typing in the IP Address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank

(nothing) Step 3 Click the Advanced tab and then click on the DMZ button. Select Enable and type in the IP Address you found in step 1. Step 4 Click Apply and then Continue to save the changes. Note: When DMZ is enabled, Virtual Server settings will still be effective. Remember, you cannot forward the same port to multiple IP Addresses, so the Virtual Server settings will take priority over DMZ settings. 81 Frequently Asked Questions (continued) How do I open a range of ports on my DI-524UP using Firewall rules?

Step 1 Access the routers web conguration by entering the routers IP Address in your web browser. The default IP Address is 192.168.0.1. Login using your password. The default username is admin and the password is blank. If you are having difculty accessing web management, please see the rst question in this section. Step 2 From the web management Home page, click the Advanced tab then click the Firewall button. Step 3 Click on Enabled and type in a name for the new rule. Step 4 Choose WAN as the Source and enter a range of IP Addresses out on the internet that you would like this rule applied to. If you would like this rule to allow all internet users to be able to access these ports, then put an Asterisk in the rst box and leave the second box empty. Step 5 Select LAN as the Destination and enter the IP Address of the computer on your local network that you want to allow the incoming service to. This will not work with a range of IP Addresses. Step 6 Enter the port or range of ports that are required to be open for the incoming service. Step 7 Click Apply and then click Continue. Note: Make sure DMZ host is disabled. Because our routers use NAT (Network Address Translation), you can only open a specic port to one computer at a time. For example: If you have 2 web servers on your network, you cannot open port 80 to both computers. You will need to congure 1 of the web servers to use port 81. Now you can open port 80 to the rst computer 82 and then open port 81 to the other computer. Frequently Asked Questions (continued) What are virtual servers?

A Virtual Server is dened as a service port, and all requests to this port will be redirected to the computer specied by the server IP. For example, if you have an FTP Server (port 21) at 192.168.0.5, a Web server (port 80) at 192.168.0.6, and a VPN server at 192.168.0.7, then you need to specify the following virtual server mapping table:

Server Port Server IP Enable 21 80 1723 192.168.0.5 192.168.0.6 192.168.0.7 X X X How do I use PC Anywhere with my DI-524UP router?

You will need to open 3 ports in the Virtual Server section of your D-Link router. Step 1 Open your web browser and enter the IP Address of the router

(192.168.0.1). Step 2 Click on Advanced at the top and then click Virtual Server on the left side. Step 3 Enter the information as seen below. The Private IP is the IP Address of the computer on your local network that you want to connect to. Step 4 The rst entry will read as shown here:

Step 5 Click Apply and then click Continue. 83 Frequently Asked Questions (continued) How do I use PC Anywhere with my DI-524UP router? (continued) Step 6 Create a second entry as shown here:

Step 7 Click Apply and then click Continue. Step 8 Create a third and nal entry as shown here:

Step 9 Click Apply and then click Continue. Step 10 Run PCAnywhere from the remote site and use the WAN IP Address of the router, not your computers IP Address. 84 Frequently Asked Questions (continued) How can I use eDonkey behind my D-Link Router?

You must open ports on your router to allow incoming trafc while using eDonkey. eDonkey uses three ports (4 if using CLI):

4661 (TCP) To connect with a server 4662 (TCP) To connect with other clients 4665 (UDP) To communicate with servers other than the one you are connected to. 4663 (TCP) *Used with the command line (CLI) client when it is congured to allow remote connections. This is the case when using a Graphical Interface (such as the Java Interface) with the client. Step 1 Open your web browser and enter the IP Address of your router

(192.168.0.1). Enter username (admin) and your password (leave blank). Step 2 Click on Advanced and then click Firewall. Step 3 Create a new rewall rule:

Click Enabled. Enter a name (edonkey). Click Allow. Next to Source, select WAN under interface. In the rst box, enter an *. Leave the second box empty. Next to Destination, select LAN under interface. Enter the IP Address of the computer you are running eDonkey from. Leave the second box empty. Under Protocol, select *. In the port range boxes, enter 4661 in the rst box and then 4665 in the second box. Click Always or set a schedule. Step 4 Click Apply and then Continue. 85 Frequently Asked Questions (continued) How do I set up my router for SOCOM on my Playstation 2?

To allow you to play SOCOM and hear audio, you must download the latest rmware for the router (if needed), enable Game Mode, and open port 6869 to the IP Address of your Playstation. Step 1 Upgrade rmware (follow link above). Step 2 Open your web browser and enter the IP Address of the router

(192.168.0.1). Enter username (admin) and your password (blank by default). Step 3 Click on the Advanced tab and then click on Virtual Server on the left side. Step 4 You will now create a new Virtual Server entry. Click Enabled and enter a name (socom). Enter the IP Address of your Playstation for Private IP. Step 5 For Protocol Type select Both. Enter 6869 for both the Private Port and Public Port. Click Always. Click Apply to save changes and then Continue Step 6 Click on the Tools tab and then Misc on the left side. Step 7 Make sure Gaming Mode is Enabled. If not, click Enabled. Click Apply and then Continue. 86 Frequently Asked Questions (continued) How can I use Gamespy behind my D-Link router?

Step 1 Open your web browser and enter the IP Address of the router

(192.168.0.1). Enter admin for the username and your password (blank by default). Step 2 Click on the Advanced tab and then click Virtual Server on the left side. Step 3 You will create 2 entries. Step 4 Click Enabled and enter Settings:

NAME - Gamespy1 PRIVATE IP - The IP Address of your computer that you are running Gamespy from. PROTOCOL TYPE - Both PRIVATE PORT - 3783 PUBLIC PORT - 3783 SCHEDULE - Always. Click Apply and then continue Step 5 Enter 2nd entry:

Click Enabled NAME - Gamespy2 PRIVATE IP - The IP Address of your computer that you are running Gamespy from. PROTOCOL TYPE - Both PRIVATE PORT - 6500 PUBLIC PORT - 6500 SCHEDULE - Always. Click Apply and then continue. 87 Frequently Asked Questions (continued) How do I congure my router for KaZaA and Grokster?

The following is for KaZaA, Grokster, and others using the FastTrack P2P le sharing system. In most cases, you do not have to congure anything on the router or on the Kazaa software. If you are having problems, please follow steps below:

Step 1 Enter the IP Address of your router in a web browser (192.168.0.1). Step 2 Enter your username (admin) and your password (blank by default). Step 3 Click on Advanced and then click Virtual Server. Step 4 Click Enabled and then enter a Name (kazaa for example). Step 5 Enter the IP Address of the computer you are running KaZaA from in the Private IP box. Select TCP for the Protocol Type. Step 6 Enter 1214 in the Private and Public Port boxes. Click Always under schedule or set a time range. Click Apply. Make sure that you did not enable proxy/rewall in the KaZaA software. 88 Frequently Asked Questions (continued) How do I congure my router to play Warcraft 3?

You must open ports on your router to allow incoming trafc while hosting a game in Warcraft 3. To play a game, you do not have to congure your router. Warcraft 3 (Battlenet) uses port 6112. For the DI-604, DI-614+. DI-524UP, DI-754, DI-764, or DI-774:

Step 1 Open your web browser and enter the IP Address of your router

(192.168.0.1). Enter username

(admin) and your password

(leave blank). Step 2 Click on Advanced and then click Virtual Server. Step 3 Create a new entry:

Click Enabled. Enter a name

(warcraft3). Private IP - Enter the IP Address of the computer you want to host the game. Select Both for Protocol Type Enter 6112 for both Private Port and Public Port Click Always or set a schedule. Step 4 Click Apply and then Continue. Note: If you want multiple computers from you LAN to play in the same game that you are hosting, then repeat the steps above and enter the IP Addresses of the other computers. You will need to change ports. Computer #2 can use port 6113, computer

#3 can use 6114, and so on. You will need to change the port information within the Warcraft 3 software for computers #2 and up. Congure the Game Port information on each computer:

Start Warcraft 3 on each computer, click Options > Gameplay. Scroll down and you should see Game Port. Enter the port number as you entered in the above steps. 89 Frequently Asked Questions (continued) How do I use NetMeeting with my D-Link Router?

Unlike most TCP/IP applications, NetMeeting uses DYNAMIC PORTS instead of STATIC PORTS. That means that each NetMeeting connection is somewhat different than the last. For instance, the HTTP web site application uses port 80. NetMeeting can use any of over 60,000 different ports. All broadband routers using (only) standard NAT and all internet sharing programs like Microsoft ICS that use (only) standard NAT will NOT work with NetMeeting or other h.323 software packages. The solution is to put the router in DMZ. Note: A few hardware manufacturers have taken it on themselves to actually provide H.323 compatibility. This is not an easy task since the router must search each incoming packet for signs that it might be a netmeeting packet. This is a whole lot more work than a router normally does and may actually be a weak point in the rewall. D-Link is not one of the manufacturers. To read more on this visit http://www.HomenetHelp.com How do I set up my router to use iChat? -for Macintosh users-

You must open ports on your router to allow incoming trafc while using iChat. iChat uses the following ports: 5060 (UDP) 5190 (TCP) File Sharing 16384-16403

(UDP) To video conference with other clients Step 1 Open your web browser and enter the IP Address of your router

(192.168.0.1). Enter username (admin) and your password (leave blank). Step 2 Click on Advanced and then click Firewall. 90 Frequently Asked Questions (continued) How do I set up my router to use iChat? -for Macintosh users-

(continued) Step 3 Create a new rewall rule:

Click Enabled. Enter a name

(ichat1). Click Allow. Next to Source, select WAN under interface. In the rst box, enter an *. Leave the second box empty. Next to Destination, select LAN under interface. Enter the IP Address of the computer you are running iChat from. Leave the second box empty. Under Protocol, select UDP. In the port range boxes, enter 5060 in the rst box and leave the second box empty. Click Always or set a schedule. Step 4 Click Apply and then Continue. Step 5 Repeat steps 3 and 4 enter ichat2 and open ports 16384-16403 (UDP). 91 Frequently Asked Questions (continued) How do I set up my router to use iChat? -for Macintosh users-

(continued) For File Sharing:

Step 1 Click on Advanced and then Virtual Server. Step 2 Check Enabled to activate entry. Step 3 Enter a name for your virtual server entry (ichat3). Step 4 Next to Private IP, enter the IP Address of the computer on your local network that you want to allow the incoming service to. Step 5 Select TCP for Protocol Type. Step 6 Enter 5190 next to Private Port and Public Port. Stsp 7 Click Always or congure a schedule. Step 8 Click Apply and then Continue. If using Mac OS X Firewall, you may need to temporarily turn off the rewall in the Sharing preference pane on both computers. To use the Mac OS X Firewall, you must open the same ports as in the router:

Step 1 Choose Apple menu > System Preferences. Step 2 Choose View > Sharing. Step 3 Click the Firewall tab. Step 4 Click New. Step 5 Choose Other from the Port Name pop-up menu. Step 6 In the Port Number, Range or Series eld, type in: 5060, 16384-16403. Step 7 In the Description eld type in: iChat AV Step 8 Click OK. 92 Frequently Asked Questions (continued) How do I send or receive a le via iChat when the Mac OSX rewall is active? -for Macintosh users- Mac OS X 10.2 and later The following information is from the online Macintosh AppleCare knowledge base:

iChat cannot send or receive a le when the Mac OS X rewall is active in its default state. If you have opened the AIM port, you may be able to receive a le but not send them. In its default state, the Mac OS X rewall blocks le transfers using iChat or America Online AIM software. If either the sender or receiver has turned on the Mac OS X re-

wall, the transfer may be blocked. The simplest workaround is to temporarily turn off the rewall in the Sharing preference pane on both computers. This is required for the sender. However, the receiver may keep the rewall on if the AIM port is open. To open the AIM port:

Step 1 Choose Apple menu > System Preferences. Step 2 Choose View > Sharing. Step 3 Click the Firewall tab. Step 4 Click New. Step 5 Choose AOL IM from the Port Name pop-up menu. The number 5190 should already be lled in for you. Step 6 Click OK. If you do not want to turn off the rewall at the sending computer, a different le sharing service may be used instead of iChat. The types of le sharing available in Mac OS X are outlined in technical document 106461, Mac OS X: File Sharing in the AppleCare Knowledge base online. Note: If you use a le sharing service when the rewall is turned on, be sure to click the Firewall tab and select the service you have chosen in the Allow list. If you do not do this, the rewall will also block the le sharing service. 93 Frequently Asked Questions (continued) What is NAT?

NAT stands for Network Address Translator. It is proposed and described in RFC-1631 and is used for solving the IP Address depletion problem. Basically, each NAT box has a table consisting of pairs of local IP Addresses and globally unique addresses, by which the box can translate the local IP Addresses to global address and vice versa. Simply put, it is a method of connecting multiple computers to the Internet (or any other IP network) using one IP Address. D-Links broadband routers (ie: DI-604) support NAT. With proper conguration, multiple users can access the Internet using a single account via the NAT device. For more information on RFC-1631: The IP Network Address Translator (NAT), visit http://www.faqs.org/rfcs/rfc1631.html 94 Technical Support You can nd software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our web site, or by phone. Tech Support for customers within the United States:

D-Link Technical Support over the Telephone:

(877) 453-5465 24 hours a day, seven days a week. D-Link Technical Support over the Internet:

http://support.dlink.com email:support@dlink.com Tech Support for customers within Canada:

D-Link Technical Support over the Telephone:

(800) 361-5265 Monday to Friday 8:30am to 9:00pm EST D-Link Technical Support over the Internet:

http://support.dlink.ca email:support@dlink.ca When contacting technical support, please provide the following information:

Serial number of the unit Model number or product name Software type and version number 95 Warranty and Registration

(USA only) Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (D-Link) provides this Limited warranty for its product only to the person or entity that originally purchased the product from:

D-Link or its authorized reseller or distributor and Products purchased and delivered within the fty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, addresses with an APO or FPO. Limited Warranty: D-Link warrants that the hardware portion of the D-Link products described below will be free from material defects in workmanship and materials from the date of original retail purchase of the product, for the period set forth below applicable to the product type (Warranty Period), except as otherwise stated herein. 3-Year Limited Warranty for the Product(s) is dened as follows:

Hardware (excluding power supplies and fans) Three (3) Years Power Supplies and Fans One (1) Year Spare parts and spare kits Ninety (90) days D-Links sole obligation shall be to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund at D-Links sole discretion. Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service Ofce. The replacement Hardware need not be new or have an identical make, model or part. D-Link may in its sole discretion replace the defective Hardware (or any part thereof) with any reconditioned product that D-Link reasonably determines is substantially equivalent

(or superior) in all material respects to the defective Hardware. Repaired or replacement Hardware will be warranted for the remainder of the original Warranty Period from the date of original retail purchase. If a material defect is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to repair or replace the defective Hardware, the price paid by the original purchaser for the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware (or part thereof) that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. Limited Software Warranty: D-Link warrants that the software portion of the product (Software) will substantially conform to D-Links then current functional specications for the Software, as set forth in the applicable documentation, from the date of original retail purchase of the Software for a period of ninety (90) days (Warranty Period), provided that the Software is properly installed on approved hardware and operated as contemplated in its documentation. D-Link further warrants that, during the Warranty Period, the magnetic media on which D-Link delivers the Software will be free of physical defects. D-Links sole obligation shall be to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Links functional specications for the Software or to refund at D-Links sole discretion. Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software. Software will be warranted for the remainder of the original Warranty Period from the date or original retail purchase. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by the original licensee for the non-

conforming Software will be refunded by D-Link; provided that the non-conforming Software (and all copies thereof) is rst returned to D-Link. The license granted respecting any Software for which a refund is given automatically terminates. Non-Applicability of Warranty: The Limited Warranty provided hereunder for hardware and software of D-

Links products will not be applied to and does not cover any refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being sold As-Is without any warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything stated herein to the contrary. Submitting A Claim: The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and the product is within warranty, the customer shall submit a claim to D-Link as outlined below:

96 The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufcient detail to allow D-Link to conrm the same. The original product owner must obtain a Return Material Authorization (RMA) number from the Authorized D-Link Service Ofce and, if requested, provide written proof of purchase of the product (such as a copy of the dated purchase invoice for the product) before the warranty service is provided. After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the Product and will not ship back any accessories. The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery

(COD) is allowed. Products sent COD will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link, with shipping charges prepaid. Expedited shipping is available if shipping charges are prepaid by the customer and upon request. Return Merchandise Ship-To Address USA: 17595 Mt. Herrmann, Fountain Valley, CA 92708 Canada: 2180 Winston Park Drive, Oakville, ON, L6H 5W1 (Visit http://www.dlink.ca for detailed warranty information within Canada) D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to pay D-Links reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming. What Is Not Covered: This limited warranty provided by D-Link does not cover: Products, if in D-Links judgment, have been subjected to abuse, accident, alteration, modication, tampering, negligence, misuse, faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number has been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for repair, and shipping costs; Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, rmware or other products or services provided by anyone other than D-Link; Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product. Repair by anyone other than D-Link or an Authorized D-Link Service Ofce will void this Warranty. Disclaimer of Other Warranties: EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED AS-IS WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINKS PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT. THE MAXIMUM 97 LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY. Governing Law: This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This limited warranty provides specic legal rights and the product owner may also have other rights which vary from state to state. Trademarks: D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective manufacturers or owners. Copyright Statement: No part of this publication or documentation accompanying this Product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976. Contents are subject to change without prior notice. Copyright 2002 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. For detailed warranty outside the United States, please contact corresponding local D-Link ofce. FCC Caution:

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to this equipment; such modications could void the users authority to operate the equipment.

(1) The devices are restricted to indoor operations within the 5.15 to 5.25GHz range. (2) For this device to operate in the 5.15 to 5.25GHz range, the devices must use integral antennas. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this equipment must be installed to provide a separation distance of at least eight inches (20 cm) from all persons. This equipment must not be operated in conjunction with any other antenna. Register your D-Link product online at http://support.dlink.com/register/

98