| all | frequencies |
|
exhibits | applications |
|---|---|---|---|---|
| manual |
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
Revision 3 of Users Manual | Users Manual | 1.82 MiB | ||||
| 1 | Operational Description | |||||||
| 1 | Cover Letter(s) | |||||||
| 1 | Cover Letter(s) | |||||||
| 1 | External Photos | |||||||
| 1 | Internal Photos | |||||||
| 1 | ID Label/Location Info | |||||||
| 1 | Cover Letter(s) | |||||||
| 1 | RF Exposure Info | |||||||
| 1 | Cover Letter(s) | |||||||
| 1 | Test Report | |||||||
| 1 | Test Setup Photos |
| 1 | Revision 3 of Users Manual | Users Manual | 1.82 MiB |
DW-690 & DWL-A650 5GHz Wireless Cardbus Card Users Manual First Edition (December, 2001) 6DWLA650..01 i Wichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfltig durch. 2. Heben Sie diese Anleitung fr den sptern Gebrauch auf. 3. Vor jedem Reinigen ist das Gert vom Stromnetz zu trennen. Vervenden Sie keine Flssig- oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4. Um eine Beschdigung des Gertes zu vermeiden sollten Sie nur Zubehrteile verwenden, die vom Hersteller zugelassen sind. 5. Das Gert is vor Feuchtigkeit zu schtzen. 6. Bei der Aufstellung des Gertes ist auf sichern Stand zu achten. Ein Kippen oder Fallen knnte Verletzungen hervorrufen. Verwenden Sie nur sichere Standorte und beachten Sie die Aufstellhinweise des Herstellers. 7. Die Belftungsffnungen dienen zur Luftzirkulation die das Gert vor berhitzung schtzt. Sorgen Sie dafr, da diese ffnungen nicht abgedeckt werden. 8. Beachten Sie beim Anschlu an das Stromnetz die Anschluwerte. 9. Die Netzanschlusteckdose mu aus Grnden der elektrischen Sicherheit einen Schutzleiterkontakt haben. 10. Verlegen Sie die Netzanschluleitung so, da niemand darber fallen kann. Es sollete auch nichts auf der Leitung abgestellt werden. 11. Alle Hinweise und Warnungen die sich am Gerten befinden sind zu beachten. 12. Wird das Gert ber einen lngeren Zeitraum nicht benutzt, sollten Sie es vom Stromnetz trennen. Somit wird im Falle einer berspannung eine Beschdigung vermieden. 13. Durch die Lftungsffnungen drfen niemals Gegenstnde oder Flssigkeiten in das Gert gelangen. Dies knnte einen Brand bzw. Elektrischen Schlag auslsen. 14. ffnen Sie niemals das Gert. Das Gert darf aus Grnden der elektrischen Sicherheit nur von authorisiertem Servicepersonal geffnet werden. 15. Wenn folgende Situationen auftreten ist das Gert vom Stromnetz zu trennen und von einer qualifizierten Servicestelle zu berprfen:
a Netzkabel oder Netzstecker sint beschdigt. b Flssigkeit ist in das Gert eingedrungen. c Das Gert war Feuchtigkeit ausgesetzt. d Wenn das Gert nicht der Bedienungsanleitung ensprechend funktioniert oder Sie mit Hilfe dieser Anleitung keine Verbesserung erzielen. e Das Gert ist gefallen und/oder das Gehuse ist beschdigt. f Wenn das Gert deutliche Anzeichen eines Defektes aufweist. 16. Bei Reparaturen drfen nur Orginalersatzteile bzw. den Orginalteilen entsprechende Teile verwendet werden. Der Einsatz von ungeeigneten Ersatzteilen kann eine weitere Beschdigung hervorrufen. 17. Wenden Sie sich mit allen Fragen die Service und Repartur betreffen an Ihren Servicepartner. Somit stellen Sie die Betriebssicherheit des Gertes sicher. 18. Zum Netzanschlu dieses Gertes ist eine geprfte Leitung zu verwenden, Fr einen Nennstrom bis 6A und einem Gertegewicht groer 3kg ist eine Leitung nicht leichter als H05VV-F, 3G, 0.75mm2 einzusetzen Limited Warranty Hardware:
D-LINK WARRANTS EACH OF ITS HARDWARE PRODUCTS TO BE FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS UNDER NORMAL USE AND SERVICE FOR A PERIOD COMMENCING ON THE DATE OF PURCHASE FROM D-LINK OR ITS AUTHORIZED RESELLER AND EXTENDING FOR THE LENGTH OF TIME STIPULATED BY THE AUTHORIZED RESELLER OR D-LINK BRANCH OFFICE NEAREST TO THE PLACE OF PURCHASE. THIS WARRANTY APPLIES ON THE CONDITION THAT THE PRODUCT REGISTRATION CARD IS FILLED OUT AND RETURNED TO A D-LINK OFFICE WITHIN NINETY (90) DAYS OF PURCHASE. A LIST OF D-LINK OFFICES IS PROVIDED AT THE BACK OF THIS MANUAL, TOGETHER WITH A COPY OF THE REGISTRATION CARD. IF THE PRODUCT PROVES DEFECTIVE WITHIN THE APPLICABLE WARRANTY PERIOD, D-LINK WILL PROVIDE REPAIR OR REPLACEMENT OF THE PRODUCT. D-LINK SHALL HAVE THE SOLE DISCRETION WHETHER TO REPAIR OR REPLACE, AND REPLACEMENT PRODUCT MAY BE NEW OR RECONDITIONED. REPLACEMENT PRODUCT SHALL BE OF EQUIVALENT OR BETTER SPECIFICATIONS, RELATIVE TO THE DEFECTIVE PRODUCT, BUT NEED NOT BE IDENTICAL. ANY PRODUCT OR PART REPAIRED BY D-LINK PURSUANT TO THIS WARRANTY SHALL HAVE A WARRANTY PERIOD OF NOT LESS THAN 90 DAYS, FROM DATE OF SUCH REPAIR, IRRESPECTIVE OF ANY EARLIER EXPIRATION OF ORIGINAL WARRANTY PERIOD. WHEN D-LINK PROVIDES REPLACEMENT, THEN THE DEFECTIVE PRODUCT BECOMES THE PROPERTY OF D-LINK. WARRANTY SERVICE MAY BE OBTAINED BY CONTACTING A D-LINK OFFICE WITHIN THE APPLICABLE WARRANTY PERIOD, AND REQUESTING A RETURN MATERIAL AUTHORIZATION (RMA) NUMBER. IF A REGISTRATION CARD FOR THE PRODUCT IN QUESTION HAS NOT BEEN RETURNED TO D-LINK , THEN A PROOF OF PURCHASE (SUCH AS A COPY OF THE DATED PURCHASE INVOICE) MUST BE PROVIDED. IF PURCHASERS CIRCUMSTANCES REQUIRE SPECIAL HANDLING OF WARRANTY CORRECTION, THEN AT THE TIME OF REQUESTING RMA NUMBER, PURCHASER MAY ALSO PROPOSE SPECIAL PROCEDURE AS MAY BE SUITABLE TO THE CASE. AFTER AN RMA NUMBER IS ISSUED, THE DEFECTIVE PRODUCT MUST BE PACKAGED SECURELY IN THE ORIGINAL OR OTHER SUITABLE SHIPPING PACKAGE TO ENSURE THAT IT WILL NOT BE DAMAGED IN TRANSIT, AND THE RMA NUMBER MUST BE PROMINENTLY MARKED ON THE OUTSIDE OF THE PACKAGE. THE PACKAGE MUST BE MAILED OR OTHERWISE SHIPPED TO D-LINK WITH ALL COSTS OF MAILING/SHIPPING/INSURANCE PREPAID. D-
LINK SHALL NEVER BE RESPONSIBLE FOR ANY SOFTWARE, FIRMWARE, INFORMATION, OR MEMORY DATA OF iii PURCHASER CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK PURSUANT TO THIS WARRANTY. ANY PACKAGE RETURNED TO D-LINK WITHOUT AN RMA NUMBER WILL BE REJECTED AND SHIPPED BACK TO PURCHASER AT PURCHASERS EXPENSE, AND D-LINK RESERVES THE RIGHT IN SUCH A CASE TO LEVY A REASONABLE HANDLING CHARGE IN ADDITION MAILING OR SHIPPING COSTS. Software:
WARRANTY SERVICE FOR SOFTWARE PRODUCTS MAY BE OBTAINED BY CONTACTING A D-LINK OFFICE WITHIN THE APPLICABLE WARRANTY PERIOD. A LIST OF D-LINK OFFICES IS PROVIDED AT THE BACK OF THIS MANUAL, TOGETHER WITH A COPY OF THE REGISTRATION CARD. IF A REGISTRATION CARD FOR THE PRODUCT IN QUESTION HAS NOT BEEN RETURNED TO A D-LINK OFFICE, THEN A PROOF OF PURCHASE (SUCH AS A COPY OF THE DATED PURCHASE INVOICE) MUST BE PROVIDED WHEN REQUESTING WARRANTY SERVICE. THE TERM PURCHASE IN THIS SOFTWARE WARRANTY REFERS TO THE PURCHASE TRANSACTION AND RESULTING LICENSE TO USE SUCH SOFTWARE. D-LINK WARRANTS THAT ITS SOFTWARE PRODUCTS WILL PERFORM IN SUBSTANTIAL CONFORMANCE WITH THE APPLICABLE PRODUCT DOCUMENTATION PROVIDED BY D-LINK WITH SUCH SOFTWARE PRODUCT, FOR A PERIOD OF NINETY (90) DAYS FROM THE DATE OF PURCHASE FROM D-LINK OR ITS AUTHORIZED RESELLER. D-LINK WARRANTS THE MAGNETIC MEDIA, ON WHICH D-LINK PROVIDES ITS SOFTWARE PRODUCT, AGAINST FAILURE DURING THE SAME WARRANTY PERIOD. THIS WARRANTY APPLIES TO PURCHASED SOFTWARE, AND TO REPLACEMENT SOFTWARE PROVIDED BY D-LINK PURSUANT TO THIS WARRANTY, BUT SHALL NOT APPLY TO ANY UPDATE OR REPLACEMENT WHICH MAY BE PROVIDED FOR DOWNLOAD VIA THE INTERNET, OR TO ANY UPDATE WHICH MAY OTHERWISE BE PROVIDED FREE OF CHARGE. D-LINK SOLE OBLIGATION UNDER THIS SOFTWARE WARRANTY SHALL BE TO REPLACE ANY DEFECTIVE SOFTWARE PRODUCT WITH PRODUCT WHICH SUBSTANTIALLY CONFORMS TO D-LINK S APPLICABLE PRODUCT DOCUMENTATION. PURCHASER ASSUMES RESPONSIBILITY FOR THE SELECTION OF APPROPRIATE APPLICATION AND SYSTEM/PLATFORM SOFTWARE AND ASSOCIATED REFERENCE MATERIALS. D-LINK MAKES NO WARRANTY THAT ITS SOFTWARE PRODUCTS WILL WORK IN COMBINATION WITH ANY HARDWARE, OR ANY APPLICATION OR SYSTEM/PLATFORM SOFTWARE PRODUCT PROVIDED BY ANY THIRD PARTY, EXCEPTING ONLY SUCH PRODUCTS AS ARE EXPRESSLY REPRESENTED, IN D-LINK S APPLICABLE PRODUCT DOCUMENTATION AS BEING COMPATIBLE. D-LINK S OBLIGATION UNDER THIS WARRANTY SHALL BE A REASONABLE EFFORT TO PROVIDE COMPATIBILITY, BUT D-LINK SHALL HAVE NO OBLIGATION TO PROVIDE COMPATIBILITY WHEN THERE IS FAULT IN THE THIRD-PARTY HARDWARE OR SOFTWARE. D-LINK MAKES NO WARRANTY THAT OPERATION OF ITS SOFTWARE PRODUCTS WILL BE UNINTERRUPTED OR ABSOLUTELY ERROR-FREE, AND NO WARRANTY THAT ALL DEFECTS IN THE SOFTWARE PRODUCT, WITHIN OR WITHOUT THE SCOPE OF D-LINK S APPLICABLE PRODUCT DOCUMENTATION, WILL BE CORRECTED. D-Link Offices for Registration and Warranty Service THE PRODUCTS REGISTRATION CARD, PROVIDED AT THE BACK OF THIS MANUAL, MUST BE SENT TO A D-LINK OFFICE. TO OBTAIN AN RMA NUMBER FOR WARRANTY SERVICE AS TO A HARDWARE PRODUCT, OR TO OBTAIN WARRANTY SERVICE AS TO A SOFTWARE PRODUCT, CONTACT THE D-LINK OFFICE NEAREST YOU. AN ADDRESS/TELEPHONE/FAX/E-
MAIL/WEB SITE LIST OF D-LINK OFFICES IS PROVIDED IN THE BACK OF THIS MANUAL. LIMITATION OF WARRANTIES IF THE D-LINK PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMERS SOLE REMEDY SHALL BE, AT D-LINK S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. D-LINK NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF D-LINK S PRODUCTS D-LINK SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY THE CUSTOMERS OR ANY THIRD PERSONS MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING OR OTHER HAZARD. LIMITATION OF LIABILITY IN NO EVENT WILL D-LINK BE LIABLE FOR ANY DAMAGES, INCLUDING LOSS OF DATA, LOSS OF PROFITS, COST OF COVER OR OTHER INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES ARISING OUT THE INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE OR INTERRUPTION OF A D- LINK PRODUCT, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY. THIS LIMITATION WILL APPLY EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. IF YOU PURCHASED A D-LINK PRODUCT IN THE UNITED STATES, SOME STATES DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. Trademarks Copyright 2000 D-Link Corporation. Contents subject to change without prior notice. D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. All other trademarks belong to their respective proprietors. Copyright Statement No part of this publication may be reproduced in any form or by any means or used to make any derivative v such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems Inc., as stipulated by the United States Copyright Act of 1976 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. VCCI Class B Warning vii Notices NOTE: This message denotes neutral or positive information that calls out important points to the text. A note provides information that may apply only in special cases. CAUTION: Cautions call special attention to hazards that can cause system damage or data corruption, to a lesser degree than warnings. WARNING: Warnings call special attention to hazards that can cause system damage, data corruption, personal injury, or death. Statements:
Warning To ensure compliance with FCC RF exposure requirements, the antenna used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or radio transmitter. Installers and end-users must follow the installation instructions provided in this user guide. 1. Modifications to this device, unless expressly approved by D-Link, could void the users right to operate this equipment. 2. The frequency band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel Mobile Satellite systems. The device can only be operated as an indoor unit. 3. High power radars are allocated as primary users (meaning they have priority) of 5250-
5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LELAN devices used in Canada. 4. Radio Frequency interference requirements: The device is restricted to indoor use only. FCC requires this product to be used indoors due to its operation in the frequency range 5.15 to 5.25 GHz. ix Contents List of Figures .........................................................xv List of Tables.........................................................xvii Preface....................................................................xix About this Document ....................................................................................xix Audience ...................................................................................................... xx Additional Resources.................................................................................... xx 1 Introduction............................................................1-1 Package Contents .......................................................................................1-1 System Requirements .................................................................................1-2 2 Windows 2000 ........................................................2-1 Driver Installation (First-time Install) ............................................................2-1 Driver Installation (Previous Driver Installed)...............................................2-5 Driver Uninstallation ..................................................................................2-14 Device Configuration .................................................................................2-17 Infrastructure Mode .............................................................................2-22 Ad Hoc Mode.......................................................................................2-23 TCP/IP Setup ......................................................................................2-24 3 Windows Millennium Edition ............................... 3-1 Driver Installation.........................................................................................3-1 Driver Uninstallation ....................................................................................3-5 Device Configuration ...................................................................................3-7 Infrastructure Mode ...............................................................................3-9 Ad Hoc Mode.......................................................................................3-10 TCP/IP Configuration...........................................................................3-12 4 Windows 98 Second Edition ................................ 4-1 Driver Installation.........................................................................................4-1 Driver Uninstallation ....................................................................................4-5 Device Configuration ...................................................................................4-8 Infrastructure Mode ...............................................................................4-9 Ad Hoc Mode.......................................................................................4-11 TCP/IP Setup ......................................................................................4-13 5 Windows XP........................................................... 5-1 Driver Installation (First-time Install) ............................................................5-1 Driver Uninstallation ....................................................................................5-6 Device Configuration .................................................................................5-10 Infrastructure Mode .............................................................................5-12 Ad Hoc Mode.......................................................................................5-13 TCP/IP Setup ......................................................................................5-15 Windows XP Wireless Network Configuration ...........................................5-20 Infrastructure Mode .............................................................................5-22 Ad hoc mode .......................................................................................5-24 Connect to an Available Wireless Network..........................................5-26 6 Windows NT 4.0..................................................... 6-1 Driver Installation and TCP/IP Setup ...........................................................6-1 Device Configuration ...................................................................................6-7 Infrastructure Mode ...............................................................................6-8 Ad Hoc Mode.......................................................................................6-11 Verify Connection................................................................................6-13 Driver Uninstallation ..................................................................................6-15 7 LinkMon ..................................................................7-1 Installation ...................................................................................................7-1 Features ......................................................................................................7-5 8 RFSilent ..................................................................8-1 System Requirements .................................................................................8-1 Windows 98SE Environment.................................................................8-1 RFSilent Setup ............................................................................................8-2 Operation.....................................................................................................8-2 9 Troubleshooting ....................................................9-1 A Channel and Data Rate Selection ....................A-9-2 List of Figures Figure 2-1. Infrastructure Mode.............................................................. 2-17 Figure 2-2. Ad Hoc Mode ....................................................................... 2-18 Figure 8-1. RFSilent Icon ......................................................................... 8-2 Figure 8-2. RFSilent Menu Selections...................................................... 8-2 List of Tables Table 8-1. RFSilent Menu Descriptions .................................................. 8-3 Preface This users guide provides the necessary information for first-time users to successfully install the D-Link Network Driver Interface Specification (NDIS) driver, for the purpose of evaluating and/or operating the D-Link DWL-A650 Station Reference Design in a Microsoft Windows environment. This guide also provides information for users who wish to upgrade the D-Link NDIS driver from previous releases. This guide describes the steps required to install NDIS drivers for the D-Link DWL-A650 Wireless Network Adapter in Windows 2000, Windows Millennium Edition, Windows 98 Second Edition, Windows XP, and Windows NT 4.0. This guide also includes detailed instructions for configuring the PC Card device, or IEEE 802.11a station (STA), to interact with an access point (AP) in infrastructure mode and with other STAs in ad hoc mode. Instructions for installing or upgrading the diagnostic utility LinkMon are also included. You should also read this before proceeding to install the D-Link DWL-A650 Wireless Network Adapter and NDIS driver in the targeted operating system
(OS) environment. About this Document The document consists of the following chapters and appendixes:
Chapter 1 Chapter 2 Chapter 3 Chapter 4 IntroductionHardware, Software, and System Requirements needed to setup D-Link DWL-A650 Station Reference Design. Windows 2000Installation/Uninstallation Procedures and Device/Network Configurations for Windows 2000. Windows Millennium EditionInstallation/Uninstallation Procedures and Device/Network Configurations for Windows Millennium Edition. Windows 98 Second EditionInstallation/Uninstallation Procedures and Device/Network Configurations for Windows 98 Second Edition. Chapter 5 Windows XPInstallation/Uninstallation Procedures and Device/Network Configurations for Windows XP. Chapter 6 Chapter 7 Chapter 8 Chapter 9 Windows NT 4.0Installation/Uninstallation Procedures and Device/Network Configurations for Windows NT 4.0. LinkMonGraphical User Interface for Operational Status and Statistics of D-Link DWL-A650 Station Reference Design. RFSilentRFSilent application that allows you to enable or disable the RF Signal (radio) on all D-Link STA Reference Designs. TroubleshootingHints on fixing common Installation/Uninstallation and Device/Network Configurations issues. Appendix A Channel and Data Rate SelectionDescribes how to select Fixed Data Rate and/or Channel Frequency for specific testing. Audience This document is intended for D-Link customers who wish to install and evaluate the D-Link DWL-A650 Station Reference Design in the supported Microsoft Windows environments. Additional Resources D-Link STA Reference Design hardware, software, and documentation contain proprietary information of D-Link Communications, Inc., and are provided under a license agreement containing restrictions on use and disclosure, and are also protected by copyright law. Reverse engineering of this hardware, software, or documentation is prohibited. The following resources should be referenced regarding topics that are not addressed in this document:
AR5110 Radio-on-a-Chip for 5-GHz Wireless LANs data sheet
AR5210 MAC/Baseband Processor for IEEE 802.11a 5-GHz Wireless LAN data sheet
AP Users Guide
STA Reference Design Functional Specification 1 Introduction The D-Link DWL-A650 Wireless Network Adapter is an IEEE 802.11a two-chip solution reference design based on the Atheros AR5110 and AR5210 chipset. This reference design implements a half-duplex, Orthogonal Frequency Division Multiplexing (OFDM) baseband processor supporting all IEEE 802.11a data rates
(6 to 54 Mbps). It also supports the D-Link Turbo ModeTM supporting data rates up to 108 Mbps. The host interface is compatible with the PC Card 7.1 standard. You can find information regarding the D-Link Station Reference Designs in the detailed D-Link STA Reference Design Functional Specification. Package Contents Make sure the following materials are available before you begin:
One 802.11a PCI Card
One Installation CD-ROM containing software and utilities and this users guide
One 802.11a PCI Card Quick Start Guide
One warranty registration card 1-1 System Requirements
Laptop PC containing:
32-bit CardBus slot (or Desktop PC with PC Card-PCI adapter) 32 MB memory or greater 300 MHz processor or higher
Microsoft Windows 2000/Windows Millennium Edition/Windows 98 Second Edition/Windows XP/Windows NT 4.0 (with Service Pack 6) 1-2 2 Windows 2000 Driver Installation (First-time Install) Insert the D-Link DWL-A650 Wireless Network Adapter into a 32-bit CardBus slot and follow these steps to install the NDIS driver:
1. Wait for the following dialog box to display, and click Next to continue. 2-1 2. Choose Search for a suitable driver for my device (recommended), and click Next. Insert the installation CD in your CD-ROM drive. Choose Specify a location under Optional search locations, and click Next to continue. 3. 2-2 4. Browse to the location where the NDIS driver is located (assuming D is the CD-ROM drive), the default folder is D:\ndis\bin\production\ndis5. Click OK to continue. 5. When you find the D-Link driver installation file (net5210b.inf), click Next to continue. 2-3 6. The D-Link NDIS evaluation driver currently does not have a digital signature from Microsoft. Therefore, Windows 2000 shows a warning message. Click Yes to proceed with driver installation. 7. Click Finish to complete the driver installation. See Section Device Configuration for the device configuration. 2-4 Driver Installation (Previous Driver Installed) If the system already has a previous release of the D-Link NDIS installed, Windows does not prompt for the device driver when the WLAN Card is inserted. Follow the steps below to update the NDIS driver:
1. Start System Properties from Control Panel. Under Hardware tab, click Device Manager. 2-5 2. Within Device Manager, right-click D-Link DWL-A650 Wireless Network Adapter under Network adapters device node, and click Properties. 2-6 3. Click Update Driver from the Driver tab. Note the Driver Version that you are updating from. You may need to verify this field again after driver update completes to make sure Release 1.3 driver has been updated correctly. 4. Click Next to continue. 2-7 2-8 5. Choose Display a list of the known drivers for this device so that I can choose a specific driver, and click Next to continue. 6. Insert the Release 1.3 CD into your CD-ROM drive. Click Have Disk to continue. 7. Browse to the location where the NDIS driver is located (assuming D is the CD-ROM drive), the default folder is D:\ndis\bin\production\ndis5. Click OK to continue. 8. Select D-Link DWL-A650 Wireless Network Adapter from the list and click Next to continue. 2-9 9. Click Yes to continue when Windows displays the warning message. 2-10 10. Click Next to proceed with installation. 11. The D-Link NDIS evaluation driver currently does not have a digital signature from Microsoft. Therefore, Windows 2000 shows a warning message. Click Yes to proceed with driver installation. 2-11 12. Click Finish. 13. Note that Driver Version should display 1.3 as the major revision number. Click OK to continue. 2-12 14. Click Yes to restart system. 15. After system restarts, the D-Link DWL-A650 Wireless Network Adapter now displays under Network adapters in the Device Manager. Proceed to Section Device Configuration for device configuration information. 2-13 Driver Uninstallation This section provides information about uninstallation procedures required for upgrading the NDIS driver from previous D-Link software releases. If the system does not have previously installed versions of the NDIS driver and you wish to remove the newly installed driver from the system, proceed to Step 4. The NDIS driver since Release 1.0 no longer leverages the Transport Driver Interface (TDI) protocol to provide the LinkMon programming interface. The TDI protocol should be uninstalled. Follow these steps to uninstall the TDI protocol:
1. To remove the NDIS driver from the OS, go to Device Manager, right-
click D-Link DWL-A650 Wireless Network Adapter, and choose Uninstall. 2-14 2. Click OK to uninstall the device. 3. When the device is uninstalled from Device Manager, search for and delete the driver files that reside in the system. To do so, go to the Start menu and choose Search For Files or Folders, enter oem*.inf in the Search for files or folders named: field, and enter D-Link in the Containing text: field. Click Search Now. A few files matching these criteria are possible, if previous drivers have not been removed properly. Choose the files that have been found and delete them from the system. 2-15 4. To complete the uninstallation, ar5210b.sys should also be removed from the \WINNT\system32\drivers folder. 2-16 Device Configuration Configuration of the D-Link DWL-A650 Wireless Network Adapter can be done through the Network Control Panel (NCP) in adapter properties. You can set the Wireless Network Adapter to work in one of two modes, either infrastructure mode (which leverages an AP) or ad hoc mode (which consists of a group of stations participating in the WLAN). In infrastructure mode, the Wireless Network Adapter participates in a basic service set (BSS) as a station, and communicates with the other stations through an AP, as illustrated in Figure 2-1. STA2 STA1 AP Ethernet Figure 2-1. Infrastructure Mode 2-17 In ad hoc mode, a Wireless Network Adapter works within an independent basic service set (IBSS), as illustrated in Figure 2-2. All stations communicate directly with other stations without an AP. STA1 STA3 STA2 Figure 2-2. Ad Hoc Mode STA5 STA4 To configure the DWL-A650 Wireless Network Adapter:
1. In the Device Manager, right-click D-Link DWL-A650 Wireless Network Adapter, and click Properties to access the properties of the adapter. 2-18 2. Configuration additions, modifications, and deletions are made under the Settings tab of the D-Link DWL-A650 Wireless Network Adapter properties. 3. Select one of the configurations under the configuration list, and click Modify to show the Network Configuration Settings screen. This property sheet has two pages: General and Security. The General page has the following fields:
Configuration Name: This field identifies the configuration. This name must be unique. Configuration names are case insensitive. Network Name (SSID): This is the name of the IEEE 802.11a wireless network, for example, D-Link 802.11a Wireless Network. This field has a maximum limit of 32 characters. Network Connection: This field defines whether the STA is configured for an ad hoc or infrastructure network. 2-19 2-20 Power Saving: This field allows the configuration of power management options. The options are Off, Normal, and Maximum. Power management is disabled when ad hoc mode is selected in the Network Connection field. When the Power Saving setting is Off, the adapter receives full power from the PC. When the Power Saving setting is Normal, the driver turns off power to the adapter for brief periods over briefly-spaced time intervals. When the Power Saving setting is Maximum, the driver turns off power to the adapter for longer periods over more widely-spaced time intervals. Turbo Mode: This field enables or disables D-Link turbo mode. Locally Administered Address: This field defines the locally administered MAC address (LAA). To enter a value in the address field, the check box needs to be selected. Typically, an LAA is not required, because the driver automatically loads a unique, globally administered address from the EEPROM. 4. The next tab on this property sheet allows for the selection of security features. The fields on this page are as follows:
Enable Security: This field completely enables or disables the IEEE 802.11 wired equivalent privacy (WEP) security feature. Default Encryption Key: This field defines the type of encryption key to use (either Unique Key or Shared Keys). This field allows you to select only a key (Unique, First, Second, Third, or Fourth) whose corresponding field has been completed. Unique Key: This field defines the unique encryption key for security for the current network configuration. In ad hoc mode, this encryption key type is not used. To enable security using a Unique Key, this field must be populated. Shared Keys: These fields define a set of shared encryption keys. To enable security using Shared Keys, at least one Shared Key field must be populated. Key Length: This field defines the length for each encryption key. As the Key Length is changed, the number of available characters in the field is changed automatically. If after a key is entered the length is adjusted to a smaller number, the key is automatically truncated to fit. If the length is increased again, the field is not automatically updated to its previous value. All encryption key fields are displayed only when initially entered. On subsequent entry into the security property page, the fields are masked. The keys must be entered as hexadecimal digits. 2-21 Infrastructure Mode To configure an D-Link DWL-A650 Wireless Network Adapter in infrastructure mode:
1. Ensure that the Locally Administered Address checkbox is unchecked. 2. Choose the following settings:
Configuration Name: This field identifies the configuration. This name must be unique. Configuration names are case insensitive. Network Name (SSID): This is the name of the IEEE 802.11a wireless network, for example, D-Link 802.11a Wireless Network. This field has a maximum limit of 32 characters. If this field is left blank, the STA connects to the AP with the best signal strength. Network Connection: AP (infrastructure). Power Saving: This field allows the configuration of power management options. The options are Off, Normal, and Maximum. Turbo Mode: This field enables or disables D-Link turbo mode. Locally Administered Address: This field defines the locally administered MAC address (LAA). To enter a value in the address field, the check box needs to be selected. 2-22 Usually infrastructure mode is used in an enterprise environment where APs are installed and maintained by corporate IT staff. Much of the data in the enterprise network is confidential. It is important to configure security to make sure only stations with appropriate keys can receive sensitive data. The D-
Link DWL-A650 Wireless Network Adapter and NDIS driver support key lengths of 40 bits, 104 bits, and 128 bits. Typically, the appropriate encryption and decryption keys are supplied by the corporate IT staff. Ad Hoc Mode An ad hoc network usually is a short-lived network with a small number of stations. The network is usually created for a special purpose such as exchanging data between friends, or between customer and client. Because the duration of the ad hoc network tends to be limited, Power Saving and Security features are not typically a requirement. For ad hoc network activity, the Power Saving and Security features can be disabled. Currently, shared key security is supported in ad hoc mode. Future D-Link software implementations will provide unique key support. In ad hoc mode, a station scans the air for an existing BSS. If no BSS is found, the station establishes a BSS for other stations to join. When other stations scan the air and find an established BSS in place, they join that BSS to form an ad hoc network. If a specific set of stations requires ad hoc network connectivity, it is recommended to have one station establish a BSS first before configuring the remaining stations. This prevents the scenario of several stations trying to form a BSS at the same time, which can result in multiple singular BSSs being established, rather than a single BSS with multiple stations.
Configuration Name: This field identifies the configuration. This name must be unique. Configuration names are case insensitive.
Network Name (SSID): A Network Name is mandatory for ad hoc mode. The SSID for all stations in a single ad hoc network must be the same.
Network Connection: Ad Hoc.
Power Saving: Power saving mode is not currently supported in an ad hoc network.
Turbo Mode: All stations participating in the ad hoc network must have the same rate setting.
Locally Administered Address: This field defines the locally administered MAC address (LAA). To enter a value in the address field, the check box needs to be selected. 2-23 TCP/IP Setup After configuring the D-Link DWL-A650 Wireless Network Adapter through the Network Control Panel, the TCP/IP address for the network device must be configured. 1. Open the Control Panel and click Network and Dial-up Connections. 2. Find the Local Area Connection that is associated with the D-Link DWL-
A650 Wireless Network Adapter. Right-click that connection, and click Properties. 2-24 3. Select Internet Protocol (TCP/IP) and click Properties. 4. Click Use the following IP address and input an IP address and Subnet mask. Assigning an IP address and Subnet mask allows stations to operate in infrastructure mode and to have Internet access. Default gateway and DNS server information is also required. IP configuration information (DHCP or assigned IP address, Gateway and DNS server IP addresses) is usually obtained from the corporate IT staff. 5. After obtaining IP configuration information from the appropriate IT staff, click OK in both Internet Protocol (TCP/IP) Properties and Local Area Connection Properties to complete the IP configuration. 2-25 6. Choose Start > Programs > Accessories > Command Prompt to open the DOS command prompt window. Type ipconfig at the C:\> prompt to determine if the TCP/IP configuration has taken effect. To test IP connectivity in ad hoc or infrastructure mode, use the ping <ipaddress>
command. When a TCP/IP connection is established, the LinkMon utility
(See Chapter 7) can be used to monitor the D-Link DWL-A650 Wireless Network Adapter operating status. 2-26 7. To map the drive on another machine to your computer, right-click My Computer and click Map Network Drive. 8. After mapping the drive, you can perform file transfers, use video streaming applications, and all other network data transfers that are normally performed with wired 10/100 Ethernet connections. 2-27 3 Windows Millennium Edition Driver Installation D-Link recommends that you remove any existing D-Link NDIS driver on the PC system before installing Version Error! Reference source not found. release of the NDIS driver. See Section Driver Uninstallation on page 3-5 for the instructions on how to remove previous driver releases. When the system no longer has the D-Link NDIS driver installed, insert the DWL-A650 Wireless Network Adapter into a 32-bit CardBus slot, and follow these steps to install the NDIS driver:
1. Wait for the following dialog box to appear. Choose Specify the location of the driver (Advanced), and click Next to continue. 3-1 3-2 2. Choose Search for the best driver for your device. (Recommended) and select Specify a location. Click Browse to locate the NDIS driver. The default folder is E:\ndis\bin\production\ndis5 (assuming E: is the CD-
ROM drive). Click Next to continue. 3. When the D-Link driver installation file (NET5210B.INF) has been found, click Next to continue. 3-3 4. Click Finish to continue, and restart the system to complete driver installation. Refer to Section Device Configuration on page 3-7 for device configuration. 3-4 Driver Uninstallation This section provides uninstallation procedures for removing the D-Link NDIS driver from the system. Uninstallation is recommended for upgrading the NDIS driver from previous D-Link driver releases. 1. To remove the NDIS driver from the OS, go to Start > Search > For Files or Folders, and search for the INF file containing the D-Link text string under the \WINDOWS\INF folder. Be sure to include subfolders in the search criteria. When D-Linknet5210b.inf has been found, delete it by right-clicking the file and choose Delete. 3-5 2. From Control Panel, launch the System Properties window. Select D-
Link DWL-A650 Wireless Network Adapter from Device Manager, and click Remove to uninstall the device. 3. Click OK to confirm the removal of the device. Restart the system to complete un-installation. 3-6 Device Configuration Configuration of the D-Link DWL-A650 Wireless Network Adapter can be done through the D-Link NIC Configuration utility found in the Windows Control Panel. Similar to Windows 2000, the device can be set to work in one of two modes: infrastructure mode or ad hoc mode. Please refer to Section Device Configuration beginning on page 2-17 for more details on these network connection types. To launch the configuration utility, go to Control Panel and double-click on the D-Link NIC Configuration icon. 3-7 The configuration utility allows addition, modification, and deletion of the configuration profiles. Select one of the existing configuration profiles under the configuration list to modify, or click New to add a new configuration profile. Follow Section Infrastructure Mode on page 3-9 and Section Ad Hoc Mode on page 3-10 to set up the station to work in infrastructure mode and ad hoc mode. 3-8 Infrastructure Mode This section defines the process of configuring an D-Link DWL-A650 Wireless Network Adapter in infrastructure mode. See Section Device Configuration beginning on page 2-17 for detailed descriptions of each option in the Network Configuration Settings. 1. Under the General tab, make sure the Locally Administered Address checkbox is unchecked. Use the following information as a guideline to choose the values of each field in the configuration window:
Configuration Name: This field identifies the configuration. This name must be unique. Configuration names are case insensitive. Network Name (SSID): This is the name of the IEEE 802.11a wireless network. This field has a maximum limit of 32 characters. If this field is left blank, the STA connects to the AP with the best signal strength. Network Connection: AP (Infrastructure) Power Saving: This field allows the configuration of power management options. The options are Off, Normal, and Maximum. Turbo Mode: This field enables or disables D-Link turbo mode. 3-9 2. Usually, infrastructure mode is used in an enterprise environment where APs are installed and maintained by corporate IT staff. Much of the data in the enterprise network is confidential. It is important to configure security to make sure only stations with appropriate keys can receive sensitive data. The D-Link DWL-A650 Wireless Network Adapter and NDIS driver support key lengths of 40 bits, 104 bits and 128 bits. Typically, the appropriate encryption and decryption keys are supplied by the corporate IT staff. Ad Hoc Mode This section defines the process of configuring an D-Link DWL-A650 Wireless Network Adapter in ad hoc or IBSS mode. See Section Ad Hoc Mode on page 2-23 for descriptions of ad hoc operation. 1. Similar to the set-up of AP Infrastructure mode described in the previous section, ad hoc mode is also configured by changing the options in the Network Configuration Settings of the D-Link NIC Configuration utility. Use the following information as a guideline to choose the values of each field in the configuration window:
Configuration Name: This field identifies the configuration. This name must be unique. Configuration names are case insensitive. Network Name (SSID): A Network Name is mandatory for ad hoc mode. The SSID for all stations in a single ad hoc network must be the same. Network Connection: Ad Hoc. 3-10 Power Saving: Power saving mode is not currently supported in an ad hoc network. Turbo Mode: All stations participating in the ad hoc network must have the same rate setting. Locally Administered Address: This field defines the locally administered MAC address (LAA). To enter a value in the address field, the check box needs to be selected. 2. You can optionally set up other properties, but because the duration of the ad hoc network tends to be limited, Power Saving and Security features are not typically a requirement. For ad hoc network activity, the Power Saving and Security features can be disabled. Currently, shared key security is supported in ad hoc mode. Future D-Link software implementations will provide unique key support. 3. Click OK when the properties are set correctly. The system needs to reboot in order for the changes to take effect. Note that in ad hoc mode, a station scans the air for an existing BSS. If no BSS is found, the station establishes a BSS for other stations to join. When other stations scan the air and find an established BSS in place, they join that BSS to form an ad hoc network. If a specific set of stations requires ad hoc network connectivity, it is recommended to have one station establish a BSS first before configuring the remaining stations. This prevents the scenario of several stations trying to form a BSS at the same time, which can result in multiple singular BSSs being established, rather than a single BSS with multiple stations. 3-11 TCP/IP Configuration After configuring the D-Link DWL-A650 Wireless Network Adapter network adapter properties, the TCP/IP address for the network device needs to be configured. 1. From Control Panel, launch the Network properties window. Select TCP/IP D-Link DWL-A650 Wireless Network Adapter and click Properties. Depending on the type of network the station connects to, Gateway and DNS Configuration information can also be required. IP configuration information (DHCP or assigned IP address, Gateway and DNS server IP addresses) is usually obtained from the corporate IT staff. For a simple demonstration, the station is assigned a static IP address. From TCP/IP Properties, choose IP Address and select Specify an IP address. Input an IP address and subnet mask. Assigning an IP address and subnet mask allows the station to interact with the AP or other stations in the same IP subnet. Click OK to complete the TCP/IP configuration, and restart the system for the changes to take effect. 3-12 2. Choose Start > Programs > Accessories > Command Prompt to open the DOS command prompt window. Type ipconfig to determine if the TCP/IP configuration has taken effect. To test IP connectivity in ad hoc or infrastructure mode, use the ping <ipaddress> command. When a TCP/IP connection is established, the LinkMon utility (see Chapter 7) can be used to monitor the D-Link DWL-A650 Wireless Network Adapter operating status. 3-13 3. To map the drive on another machine to your computer, right-click My Computer and click Map Network Drive. Specify the path of a network-shared folder. 4. After mapping the drive, you can perform file transfers, video streaming, and all other network data transfers that are normally performed with wired 10/100 Ethernet connections. 3-14 3-15 4 Windows 98 Second Edition Driver Installation D-Link recommends that you remove any existing D-Link NDIS driver on the PC system before installing Version 1.3 release of the NDIS driver. See Section Driver Uninstallation on page 4-5 for the instructions on how to remove previous driver releases. When the system no longer has the D-Link NDIS driver installed, insert the DWL-A650 Wireless Network Adapter into a 32-bit CardBus slot, and follow these steps to install the NDIS driver:
1. Wait for the following dialog box to appear, and click Next to continue. 4-1 4-2 2. Choose Search for the best driver for your device. (Recommended), and click Next. 3. Insert the D-Link Software Release CD in your CD-ROM drive. Choose Specify a location and browse to the location where the NDIS driver is located. The default folder is D:\ndis\bin\production\ndis5 (assuming D: is the CD-ROM drive). Click Next to continue. 4-3 4. When the D-Link driver installation file (NET5210B.INF) has been found, click Next to continue. 5. Click Finish to continue. 4-4 6. Click Yes to restart the system and complete driver installation. See Section Device Configuration on page 4-8 for device configuration. Driver Uninstallation This section provides uninstallation procedures for removing the D-Link NDIS driver from the system. Uninstallation is recommended for upgrading the NDIS driver from previous D-Link driver releases. 1. To remove the NDIS driver from the OS, go to Start > Search > For Files or Folders, and search for the INF file containing the D-Link text string under the \WINDOWS\INF folder. Be sure to include subfolders in the search criteria. 4-5 2. When D-Linknet5210b.inf has been found, delete it by right-clicking the file and choose Delete. 4-6 3. From Control Panel, launch the Network properties window. Select D-
Link DWL-A650 Wireless Network Adapter from the list, and click Remove to uninstall the device. 4. Click OK to confirm the removal of the device. Restart the system to complete uninstallation. 4-7 Device Configuration Configuration of the D-Link DWL-A650 Wireless Network Adapter can be done through the D-Link NIC Configuration utility found in the Windows Control Panel. Similar to Windows 2000 the device can be set to work in one of two modes: infrastructure mode or ad hoc mode. Please refer to Section Device Configuration beginning on page 2-17 for more details on these network connection types. To launch the configuration utility, go to Control Panel and double-click on the D-Link NIC Configuration icon. The configuration utility allows addition, modification, and deletion of the configuration profiles. Select one of the existing configuration profiles under the configuration list to modify, or click New to add a new configuration profile. Follow Section Infrastructure Mode on page 4-9 and Section Ad Hoc Mode on page 4-11 to set up the station to work in infrastructure mode and ad hoc mode. 4-8 Infrastructure Mode This section defines the process of configuring an D-Link DWL-A650 Wireless Network Adapter in infrastructure mode. See Section Device Configuration beginning on page 2-17 for detailed descriptions of each option in the Network Configuration Settings. 1. Under the General tab, make sure the Locally Administered Address checkbox is unchecked. Use the following information as a guideline to choose the values of each field in the configuration window:
Configuration Name: This field identifies the configuration. This name must be unique. Configuration names are case insensitive. Network Name (SSID): This is the name of the IEEE 802.11a wireless network. This field has a maximum limit of 32 characters. If this field is left blank, the STA connects to the AP with the best signal strength. Network Connection: AP (Infrastructure) Power Saving: This field allows the configuration of power management options. The options are Off, Normal, and Maximum. Turbo Mode: This field enables or disables D-Link turbo mode. 4-9 2. Usually, infrastructure mode is used in an enterprise environment where APs are installed and maintained by corporate IT staff. Much of the data in the enterprise network is confidential. It is important to configure security to make sure only stations with appropriate keys can receive sensitive data. The D-Link DWL-A650 Wireless Network Adapter and NDIS driver support key lengths of 40 bits, 104 bits, and 128 bits. Typically, the appropriate encryption and decryption keys are supplied by the corporate IT staff. 4-10 Ad Hoc Mode This section defines the process of configuring an D-Link DWL-A650 Wireless Network Adapter in ad hoc or IBSS mode. See Section Ad Hoc Mode on page 2-23 for descriptions of ad hoc operation. 1. Similar to the setup of the AP infrastructure mode described in the previous section, ad hoc mode is also configured by changing the Network Configuration Settings of the D-Link NIC Configuration utility. Use the following information as a guideline to choose the values of each field in the configuration window:
Configuration Name: This field identifies the configuration. This name must be unique. Configuration names are case insensitive. Network Name (SSID): A Network Name is mandatory for ad hoc mode. The SSID for all stations in a single ad hoc network must be the same. Network Connection: Ad Hoc. Power Saving: Power saving mode is not currently supported in an ad hoc network. Turbo Mode: All stations participating in the ad hoc network must have the same rate setting. Locally Administered Address: This field defines the locally administered MAC address (LAA). To enter a value in the address field, the check box needs to be selected. 4-11 2. You can optionally set up other properties, but because the duration of the ad hoc network tends to be limited, Power Saving and Security features are not typically a requirement. For ad hoc network activity, the Power Saving and Security features can be disabled. Currently, shared key security is supported in ad hoc mode. Future D-Link software implementations will provide unique key support. 3. Click OK when the properties are set correctly. The system needs to reboot in order for the changes to take effect. Note that in ad hoc mode, a station scans the air for an existing BSS. If no BSS is found, the station establishes a BSS for other stations to join. When other stations scan the air and find an established BSS in place, they join that BSS to form an ad hoc network. If a specific set of stations requires ad hoc network connectivity, it is recommended to have one station establish a BSS first before configuring the remaining stations. This prevents the scenario of several stations trying to form a BSS at the same time, which can result in multiple singular BSSs being established, rather than a single BSS with multiple stations. 4-12 TCP/IP Setup After configuring the D-Link DWL-A650 Wireless Network Adapter network adapter properties, the TCP/IP address for the network device needs to be configured. 1. From Control Panel, launch the Network properties window. Select TCP/IP D-Link DWL-A650 Wireless Network Adapter and click Properties. Depending on the type of network the station connects to, Gateway and DNS Configuration information can also be required. IP configuration information (DHCP or assigned IP address, Gateway and DNS server IP addresses) is usually obtained from the corporate IT staff. For a simple demonstration, the station is assigned a static IP address. From TCP/IP Properties, choose IP Address and select Specify an IP address. Input an IP address and subnet mask. Assigning an IP address and subnet mask allows the station to interact with the AP or other stations in the same IP subnet. Click OK to complete the TCP/IP configuration, and restart the system for the changes to take effect. 4-13 2. Choose Start > Programs > Accessories > Command Prompt to open the DOS command prompt window. Type ipconfig to determine if the TCP/IP configuration has taken effect. To test IP connectivity in ad hoc or infrastructure mode, use the ping <ipaddress> command. When a TCP/IP connection is established, the LinkMon utility (see Chapter 7) can be used to monitor the D-Link DWL-A650 Wireless Network Adapter operating status. 4-14 3. To map the drive on another machine to your computer, right-click My Computer and click Map Network Drive. Specify the path of a network-shared folder. 4. After mapping the drive, you can perform file transfers, video streaming, and all other network data transfers that are normally performed with wired 10/100 Ethernet connections. 4-15 5 Windows XP Driver Installation (First-time Install) D-Link recommends that you remove any existing D-Link drivers on the PC system before installing Version Error! Reference source not found. release of the NDIS driver. See Section Driver Uninstallation on page 5-6 for the instructions on how to remove previous driver releases. With no existing D-Link NDIS driver installed, insert the D-Link DWL-A650 Wireless Network Adapter into a 32-bit CardBus slot, and follow these steps to install the NDIS driver:
1. Wait for the following dialog box to appear. Choose Install from a list or specific location (Advanced), and click Next to continue. 5-1 5-2 2. Under Search for the best driver in these locations, choose Include this location in the search and click Browse to find the location of the NDIS driver. When the driver location has been identified, click Next to continue. 5-3 3. The D-Link NDIS evaluation driver currently does not have a digital signature from Microsoft. Therefore, Windows XP shows a warning message. Click Continue Anyway to proceed with driver installation. 4. Click Finish to complete driver installation, and refer to Section Device Configuration on page 5-10 for device configuration. 5-4 5-5 Driver Uninstallation This section provides uninstallation procedures for removing the D-Link NDIS driver from the system. Uninstallation is recommended for upgrading the NDIS driver from previous D-Link driver releases. 1. To remove the NDIS driver from the OS, go to Device Manager, right click D-Link DWL-A650 Wireless Network Adapter, and choose Uninstall. 2. Click OK to uninstall the device. 5-6 5-7 3. When the device is uninstalled from Device Manager, search for and delete the driver installation file that resides in the system. To do so, go to Start and choose Search > All files and folder, enter oem*.inf in the All or part of the file name field, and enter D-Link in the A word or phrase in the file field. Enter C:\WINNT\INF in the Look in field, where C: is the drive letter of where Windows XP is installed. Click Search to find the driver installation file. 4. A file matching the search criteria is displayed. Choose this file and delete it from the system. 5-8 5-9 Device Configuration Windows XP zero-configuration functionality allows the user to select and join a wireless network without having to configure the device separately. You can decide to choose the default parameters and directly proceed to zero-
configuration in Section Windows XP Wireless Network Configuration on page 5-20. Similar to Windows 2000, configuration of the D-Link DWL-A650 Wireless Network Adapter can be done through the Network Control Panel (NCP) in adapter properties. You can set the Wireless Network Adapter to work in one of two modes: infrastructure mode or ad hoc mode. See Section Device Configuration beginning on page 2-17 for more details on these network connection types. To launch NCP go to Device Manager, right-click D-Link DWL-A650 Wireless Network Adapter, and select Properties to access to the properties of the adapter. 5-10 Configuration additions, modifications, and deletions are made under the Settings tab of D-Link DWL-A650 Wireless Network Adapter Properties. Select one of the configurations under the configuration, click Modify or New and complete the steps in Section Infrastructure Mode on page 5-12 or Section Ad Hoc Mode on page 5-13 to set up the station to work in infrastructure mode or ad hoc mode, respectively. 5-11 Infrastructure Mode This section defines the process of configuring an D-Link DWL-A650 Wireless Network Adapter in infrastructure mode. See Section Device Configuration beginning on page 2-17 for detailed descriptions of each option in the Network Configuration Settings. 1. Under the General tab, make sure the Locally Administered Address checkbox is unchecked. Use the following information as a guideline to choose the values of each field in the configuration window:
Configuration Name: This field identifies the configuration. This name must be unique. Configuration names are case insensitive, for example, Infrastructure. Network Name (SSID): This is the name of the IEEE 802.11a wireless network, for example, AP_Network. This field has a maximum limit of 32 characters. If this field is left blank, the STA connects to the AP with the best signal strength. Network Connection: AP (Infrastructure). Power Saving: This field allows the configuration of power management options. The options are Off, Normal, and Maximum. Turbo Mode: This field enables or disables D-Link turbo mode. 5-12 2. Usually, infrastructure mode is used in an enterprise environment where APs are installed and maintained by corporate IT staff. Much of the data in the enterprise network is confidential. It is important to configure security to make sure only stations with appropriate keys can receive sensitive data. The D-Link DWL-A650 Wireless Network Adapter and NDIS driver support key lengths of 40 bits, 104 bits and 128 bits. Typically, the appropriate encryption and decryption keys are supplied by the corporate IT staff. Ad Hoc Mode This section defines the process of configuring an D-Link DWL-A650 Wireless Network Adapter in ad hoc or IBSS mode. See Section Ad Hoc Mode on page 2-23 for descriptions of ad hoc operation. 1. Similar to the setup of AP Infrastructure mode described in the previous section, ad hoc mode is also configured by changing the options in the Network Configuration Settings window. Use the following information as a guideline to choose the values of each field in the configuration window:
Configuration Name: This field identifies the configuration. This name must be unique. Configuration names are case insensitive, for example, Ad Hoc. 5-13 Network Name (SSID): A Network Name is mandatory for ad hoc mode. The SSID for all stations in a single ad hoc network must be the same. Network Connection: Ad Hoc. Power Saving: Power saving mode is not currently supported in an ad hoc network. Turbo Mode: All stations participating in the ad hoc network must have the same rate setting. Locally Administered Address: This field defines the locally administered MAC address (LAA). To enter a value in the address field, the check box needs to be selected. 2. You can optionally set up security features, but it is not typically a requirement because the duration of the ad hoc network tends to be limited. Currently, shared key security is supported in ad hoc mode. Future D-Link software implementations will provide unique key support. 5-14 3. In ad hoc mode, a station scans the air for an existing BSS. If no BSS is found, the station establishes a BSS for other stations to join. When other stations scan the air and find an established BSS in place, they join that BSS to form an ad hoc network. If a specific set of stations requires ad hoc network connectivity, it is recommended to have one station establish a BSS first before configuring the remaining stations. This prevents the scenario of several stations trying to form a BSS at the same time, which can result in multiple singular BSSs being established, rather than a single BSS with multiple stations. TCP/IP Setup After configuring the D-Link DWL-A650 Wireless Network Adapter through the Network Control Panel, the TCP/IP address for the network device needs to be configured. 1. From the Start menu, choose Programs > Accessories >
Communications > Network Connections. Find the Local Area Connection that is associated with the D-Link DWL-A650 Wireless Network Adapter. Right-click that connection and click Properties. 5-15 2. Select Internet Protocol (TCP/IP) and click Properties. Click Use the following IP address and input an IP address and Subnet mask. Depending on the type of network the station connects to, Gateway and DNS Configuration information can also be required. IP configuration information (DHCP or assigned IP address, Gateway and DNS server IP addresses) is usually obtained from the corporate IT staff. For a simple demonstration, the station is assigned a static IP address. Click OK in both Internet Protocol (TCP/IP) Properties and Local Area Connection Properties to complete the IP configuration. 5-16 3. Choose Start > Programs > Accessories > Command Prompt to open a command prompt window. Type ipconfig to determine if the TCP/IP configuration has taken effect. To test IP connectivity in ad hoc or infrastructure mode, use the ping <IP address> command. When a TCP/IP connection is established, the LinkMon utility (see Chapter 7) can be used to monitor the operating status of D-Link DWL-A650 Wireless Network Adapter. 5-17 4. To map the drive on another machine to your computer, from the Start menu, choose My Computer and right-click to select Map Network Drive. 5-18 5. Assign the drive letter that maps to the network-shared folder and specify the shared folder information. Click Finish to map the drive. 6. After mapping the drive, you can perform file transfers, video streaming, and all other network data transfers that are normally performed with wired 10/100 Ethernet connections. 5-19 Windows XP Wireless Network Configuration Aside from using the Network Control Panel (NCP) to configure the D-Link DWL-A650 Wireless Network Adapter, Windows XP provides zero-
configuration functionality that automatically tries to connect the STA to available wireless networks in the following order:
a. Infrastructure mode with valid WEP keys b. Infrastructure mode with unauthenticated access for stations without WEP keys c. Ad hoc mode To configure wireless network settings through the Windows XP user interface, open Network Connections from Control Panel. Right-click the Local Area Network Connection icon (pertinent to D-Link DWL-A650 Wireless Network Adapter), click Enable to enable the device first, and then click Properties. On the Wireless Networks tab, select the Use Windows to configure my wireless network settings check box to enable automatic wireless network configuration. Follow Section Infrastructure Mode on page 5-12 or Section Ad Hoc Mode on page 5-13 to set up the station to connect to an infrastructure or ad hoc network. If you want to use non-default settings for power saving and turbo mode, you should set those parameters through the NCP method described in Section Device Configuration on page 5-10. Then use Wireless Networks tabs to select network name, network type, and encryption keys. 5-20 Note that you can disable automatic wireless network configuration, and revert back to using D-Link NCP configuration settings, by clearing the Use Windows to configure my wireless network settings check box. 5-21 Infrastructure Mode To set up automatic wireless network configuration to connect to an existing Access Point (infrastructure network):
1. Click the network name under Available networks in the Wireless Networks tab, and click Configure. You can update the list of available networks that are within range of your computer by clicking Refresh under Available Networks. 5-22 2. If the network requires WEP, then the Data encryption (WEP enabled) check box is selected by default in Wireless Network Properties. Select the The key is provided for me automatically check box if the WEP key is automatically provided for you. The driver will then use the Default Encryption key from the current D-Link NCP configuration profile irrespective of the network name. You may choose to enter the WEP key by clearing this check box and manually entering the network key and key length. Note that the key format must be hexadecimal digits and the key length is limited to 104-bit in Windows XP, as opposed to 128-bit key supported by D-Link NDIS driver in the NCP configuration interface. If the network that you are connecting to requires 128-bit WEP key, then it is recommended that you disable Windows XP automatic wireless network configuration and use D-Link NCP configuration instead. 5-23 Ad hoc mode To connect to an existing computer-to-computer (ad hoc) network:
1. Click the ad hoc network name under Available networks in the Wireless Networks tab, and click Configure. 5-24 2. In Wireless Network Properties, the This is a computer-to-computer (ad hoc) network; wireless access points are not used check box is selected by default. You may choose to enable WEP by selecting the Data encryption (WEP enabled) check box and the Network Authentication
(Shared mode) check box. Select the The key is provided for me automatically check box if the shared key is automatically provided for you. The driver will then use the Default Encryption key from the current D-Link NCP configuration profile irrespective of the network name. You may choose to enter the shared key by clearing this check box and enter the key and key length manually. Note that the key format must be hexadecimal digits and the key length is limited to 104-bit in Windows XP as opposed to 128-bit key supported by D-Link NDIS driver in the NCP configuration interface. If the network that you are connecting to requires 128-bit WEP key then it is recommended that you disable Windows XP automatic wireless network configuration and use D-Link NCP configuration instead. 5-25 3. If you want to connect to an ad hoc network, but both ad hoc and infrastructure networks are within range of your computer, then click Advanced in the Wireless Networks tab and then select Computer-to-
computer (ad hoc) networks only. Note that if you want the station to start its own ad hoc network, the Computer-to-computer (ad hoc) networks only option should be selected. There should be no network active from the preferred list and the Automatically connect to non-
preferred networks check box should be cleared. Connect to an Available Wireless Network When there is more than one available network detected by Windows XP, the OS will prompt the user to select and connect to a preferred network. To connect to an available wireless network, right-click the network connection icon in the notification area, and then click View Available Wireless Networks. 5-26 In Connect to Wireless Network, under Available networks, select the wireless network that you want to connect to. If a network key is required and is automatically provided for you, then leave Network key blank. If the network key is not automatically provided for you, then type the key in Network key. Click Connect to establish the network connection. 5-27 If you are either unable to make a connection to the wireless network that you selected or need to configure additional wireless network connection settings, click Advanced in Connect to Wireless Network, and the Wireless Networks tab will appear. 5-28 You can configure a new wireless network connection by clicking Add, and specifying the network name (SSID) in Wireless Network Properties, and the wireless network key settings, if needed. If the network connection that you are configuring is an ad hoc network, then select This is a computer-to-
computer (ad hoc) network; wireless access points are not used check box. The network will be added under Preferred networks in the Wireless Networks tab. 5-29 You can change the order of the preferred networks by selecting the wireless network that you want to reposition on the list, and then clicking Move up or Move down. You can change the wireless network connection settings of a preferred network by selecting the wireless network, clicking Properties, and then changing the settings as needed. To remove a wireless network from the list of preferred networks, select the wireless network that you want to remove, and then click Remove. 5-30 If a network is not defined in the preferred networks list, but you know it is available and you want to automatically connect to it, then click Advanced in the Wireless Networks tab, and select the Automatically connect to non-
preferred networks check box. 5-31 5-32 6 Windows NT 4.0 Driver Installation and TCP/IP Setup Windows NT 4.0 does not support Plug-and-plug. Therefore, the D-Link NDIS driver installation uses an approach that is different from the installation used in other Operating Systems. In order to install D-Link DWL-A650 Wireless Network Adapter in Windows NT 4.0 with Service Pack 6, a PC Card utility called CardWizard is used. If your computer system does not have CardWizard utility pre-loaded, then you can purchase it from SystemSoft Corporation (www.systemsoft.com) or you can download a 14-day evaluation copy from ftp://www.systemsoft.com/pub/Wn51tren.exe. Note that CardWizard requires Windows NT 4.0 Build 1381 (Service Pack 6) installed in order to function correctly. Please install Service Pack 6 if your Windows NT 4.0 is not updated. After CardWizard utility is loaded, insert the D-Link DWL-A650 Wireless Network Adapter into a 32-bit CardBus slot, and follow these steps to install the NDIS driver:
1. CardWizard will detect the insertion of the D-Link CardBus card and show the following screen. Click Correct to continue. 6-1 2. Click OK to continue. 3. Windows NT 4.0 Network Properties windows displays. Click Add to continue. 6-2 4. Click Have Disk. 5. Manually enter the location of where the D-Link NDIS 4.0 driver is located. For example, D:\NDIS\BIN\PRODUCTION\NDIS4. Click OK to continue. 6-3 6-4 6. Make sure D-Link DWL-A650 Wireless Network Adapter is selected. Click OK to continue. 7. Set Map Registers, QoS, and Transmit Power Control to default values and click OK. 6-5 8. Windows NT 4.0 binds TCP/IP protocol to D-Link DWL-A650 Wireless Network Adapters and TCP/IP properties have to be entered. Depending on the type of network the station connects to, Gateway and DNS Configuration information may also be required. IP configuration information (DHCP or assigned IP address, Gateway and DNS server IP addresses) is usually obtained from the corporate IT staff. For a simple demonstration, the station is assigned a static IP address. Choose Specify an IP address and enter an IP address and subnet mask. Assigning an IP address and subnet mask allows the station to interact with the AP or other stations in the same IP subnet. Click OK to complete the TCP/IP configuration. 6-6 9. Restart the system for the changes to take effect. Device Configuration Configuration of the D-Link DWL-A650 Wireless Network Adapter can be done through the D-Link NIC Configuration Control Panel applet provided by D-Link. Similar to Windows 2000, the device can be set to work in one of two modes, either infrastructure mode or ad hoc mode. See Section Device Configuration beginning on page 2-17 for more details on these network connection types. Start D-Link NIC Configuration utility from the Control Panel. 6-7 Select one of the configuration(s) under the configuration list and click Modify or click New, and follow the Section Infrastructure Mode on page 6-8 and Section Ad Hoc Mode on page 6-11 to set up the station to work in infrastructure mode and ad hoc mode. Infrastructure Mode This section defines the process of configuring an D-Link DWL-A650 Wireless Network Adapter in infrastructure mode. Refer to Section Device Configuration beginning on page 2-17 for detailed descriptions of each option in the Network Configuration Settings. 1. Under the General tab, make sure the Locally Administered Address checkbox is unchecked. Use the following information as a guideline to choose the values of each field in the configuration window:
Configuration Name: This field identifies the configuration. This name must be unique. Configuration names are case insensitive. For example, AP. 6-8 Network Name (SSID): This is the name of the IEEE 802.11a wireless network. For example, D-Link_AP. This field has a maximum limit of 32 characters. If this field is left blank, the STA will connect to the AP with the best signal strength. Network Connection: AP (Infrastructure). Power Saving: This field allows the configuration of power management options. The options are Off, Normal, and Maximum. Turbo Mode: This field enables or disables D-Link Turbo mode. 6-9 Usually, infrastructure mode is used in an enterprise environment where APs are installed and maintained by corporate IT staff. Much of the data in the enterprise network is confidential. It is important to configure security to make sure only stations with appropriate keys can receive sensitive data. The D-Link DWL-A650 Wireless Network Adapter and NDIS driver support key lengths of 40-bits, 104-bits and 128-bits. Typically, the appropriate encryption and decryption keys will be supplied by the corporate IT staff. 6-10 Ad Hoc Mode This section defines the process of configuring an D-Link DWL-A650 Wireless Network Adapter in ad hoc or IBSS mode. Refer to Section Ad Hoc Mode on page 2-23 for detail descriptions of ad hoc operation. 1. Similar to the set up of AP Infrastructure mode described in the previous section, ad hoc mode is also configured by changing the options in Network Configuration Settings window. Use the following information as a guideline to choose the values of each field in the configuration window:
Configuration Name: This field identifies the configuration. This name must be unique. Configuration names are case insensitive. For example, Ad Hoc. Network Name (SSID): A Network Name is mandatory for ad hoc mode. The SSID for all stations in a single ad hoc network must be the same. Network Connection: Ad Hoc. Power Saving: Power saving mode is not currently supported in an ad hoc network. Turbo Mode: All stations participating in the ad hoc network must have the same rate setting. Locally Administered Address: This field defines the locally administered MAC address (LAA). To enter a value in the address field, the check box needs to be selected. 6-11 2. You may optionally set up security features, but it is not typically a requirement, since the duration of the ad hoc network tends to be limited. Currently, only shared key security is supported in ad hoc mode. Future D-Link software implementations will provide unique key support. 6-12 3. In ad hoc mode, a station will scan the air for an existing BSS. If no BSS is found, the station will establish a BSS for other stations to join. When other stations scan the air and find an established BSS in place, they join that BSS to form an ad hoc network. If a specific set of stations requires ad hoc network connectivity, it is recommended to have one station establish a BSS first before configuring the remaining stations. This will prevent the scenario of several stations trying to form a BSS at the same time, which may result in multiple singular BSSs being established rather than a single BSS with multiple stations. Verify Connection You may use LinkMon utility to monitor the operating status of D-Link DWL-
A650 Wireless Network Adapter once the STA is connected. Please refer to Chapter 7 for descriptions of LinkMon utility. If the STA is configured properly then you will be able to perform ping test as well as other network applications that a wired Ethernet device can perform. 1. Choose Start > Programs > Accessories > Command Prompt to open the command prompt window. Type ipconfig to determine if the TCP/IP configuration has taken effect. To test IP connectivity in ad hoc or infrastructure mode, use the ping <ipaddress> command. 6-13 2. To map the drive on another machine to your computer, right-click My Computer and click Map Network Drive. 3. Specify the path of a network-shared folder. 4. After mapping the drive, you can perform file transfers, video streaming, and all other network data transfers that are normally performed with wired 10/100 Ethernet connections. 6-14 Driver Uninstallation This section provides uninstallation procedures for removing the D-Link NDIS driver from the system. 1. To remove the NDIS driver from the system, go to Control Panel and open Network properties. 6-15 2. Under the Adapters tab, choose D-Link DWL-A650 Wireless Network Adapter and click Remove. 3. Click OK to confirm the removal of the D-Link DWL-A650 Wireless Network Adapter. 6-16 4. D-Link DWL-A650 Wireless Network Adapter is no longer listed under the Adapters tab. Click Close to continue. 5. Restart the system to complete the un-installation of D-Link NDIS 4.0 driver. 6-17 Installation 7 LinkMon LinkMon is a Graphical User Interface (GUI) program that provides detailed operational status and statistics for the D-Link DWL-A650 Wireless Network Adapter. The LinkMon executable file, linkmon.exe, is included on the D-Link Release Version Error! Reference source not found. CD, and is in the folder
\ndis\bin\production\. Copy this file from the CD to a local drive for execution. Since Windows 98 SE does not have native support for WMI, which is required to make LinkMon work correctly, an upgrade from Microsoft is needed. Use the procedures described in the following section to acquire and install the necessary WMI module from Microsoft. This is only required for Windows 98 SE installations. 1. Download WMI installer from Microsoft (wmi9x.exe) and save it to your hard disk. 2. Execute WMI installer by double-clicking wmi9x.exe. 7-1 7-2 3. Click Next to continue. 4. Click I accept this agreement and then click Next to continue. 7-3 5. Click Next to continue. 6. The installer now installs files to the SYSTEM directory. 7. The system must be rebooted for the WMI installation files to become effective. When the system completes the rebooting process, launch LinkMon. 7-4 Features There are five tabs in LinkMon used to display STA information:
General tab
Frame Statistics tab
Transmit Retries tab
Station tab
Driver tab Under the General tab of the LinkMon program property sheet is general information about the program and its operations. Under the Frame Statistics tab is statistical information showing the number of frames being sent and received, retry count on frames sent, frame checksum error counts for received frames, and receive signal strength indicator (RSSI) information. These fields are described in the Station Programmers Guide under Appendix A as OIDs. LinkMon supports most of the OIDs listed in that section. 7-5 Under the Transmit Retries tab is detailed transmit retry statistical information for transmitted frames. 7-6 Under the Station tab is detailed BSS information including SSID, BSSID, association status, operating channel frequency, and information about scanned APs. Under the Driver tab is statistical data pertaining to NDIS driver operation. 7-7 The Action menu enables a NDIS driver unloading and reloading, and network interface card (NIC) reset. Note that driver unload option is not available in Windows Me, Windows 98SE, and Windows NT 4.0. NIC reset is also not available in Windows NT 4.0. On the Options menu, choose Settings. 7-8 Under the Display tab, you can select the data display modes of Cumulative or Relative. Cumulative mode displays statistical LinkMon data collected from the beginning of driver load. Relative mode displays differences in the statistical data since the last update. Under the Log File tab, the logging function can be enabled to log to a file the statistical information collected by the LinkMon utility, for later reference or post processing by an application such as Microsoft Excel. 7-9 8 RFSilent This chapter describes the RFSilent application that allows you to enable or disable the RF Signal (radio) on all D-Link STA Reference Designs. The RFSilent is a Windows-based application that appears in the right-hand corner of your Windows taskbar. System Requirements The RFSilent application communicates with most Windows applications using Windows Management Instrumentation (WMI). For Windows NT 4.0, RFSilent communicates through the Input and Output Control (IOCTL) mechanism. If you are using Windows 98SE, WMI does not come pre-installed and you must install it prior to using RFSilent. Refer to the following procedure to acquire and install the required WMI module from Microsoft. Windows 98SE Environment If you want to use the RFSilent application in a Windows 98SE environment, you must install WMI. Follow these steps to install WMI:
1. Download the WMI installer (wmi9x.exe) from Microsoft and save it to your hard disk. 2. Execute the WMI Installer by double-clicking wmi9x.exe. 3. Click Next to continue. 8-1 4. Click I accept this agreement and then click Next to continue. 5. Click Next to continue. The installer now copies the necessary files to the SYSTEM directory. 6. Reboot the system. RFSilent Setup The RFSilent application allows you to enable or disable D-Link STA References Designs. You can enable or disable the RFSilent application through user-defined settings. Refer to a description of driver parameters in the AP Programmers Reference Guide. Operation The RFSilent application is a Windows-based application that, once enabled, appears as an icon (RF) in the right-hand corner of your Windows taskbar
(see Figure 8-1). You can automatically launch RFSilent at system boot-up by entering a shortcut statement in the Startup folder. Figure 8-1. RFSilent Icon Position your cursor over the RF Icon in your toolbar and use your right or left mouse button to display the RFSilent application selections (see Figure 8-2). The radio button on the side of menu selections indicates the current state of the RFSilent application. Figure 8-2. RFSilent Menu Selections Refer to Table 8-1 for a description of the RFSilent menu selections. 8-2 Table 8-1. RFSilent Menu Descriptions RFSilent Menu Item Disable RF Signal Descriptions Use this selection to disable D-Link STA Reference Design. Enable RF Signal About Exit Use this selection to enable D-Link STA Reference Design. Displays copyright, version information, and the build date for the RFSilent application. Quits the RFSilent application. 8-3 9 Troubleshooting This chapter provides solutions to common problems that usually occur during the installation and operation of the D-Link DWL-A650 Wireless Network Adapter. Read the following descriptions if you are having problems. If you cannot find an answer here, please contact an D-Link field application engineer for assistance. 1. My computer does not recognize the D-Link CardBus reference card. Make sure the CardBus card is properly inserted into a 32-bit CardBus slot. If Windows does not detect the hardware upon insertion of the card, the system could have a previous D-Link NDIS driver installed. Remove the old driver and try again. 2. The D-Link DWL-A650 Wireless Network Adapter does not work properly after the driver is installed. Re-insert the CardBus card into the slot. A beep should be heard if the adapter is properly inserted. Go to Device Manager and make sure the D-
Link DWL-A650 Wireless Network Adapter exists under the network adapters device node. If you see the yellow exclamation mark then there are conflicting resources. In this case, make sure the computer system has a free IRQ and make sure you have installed the proper driver. Uninstall the driver, restart the system, and repeat the driver installation steps if necessary. 3. Stations cannot associate in ad hoc mode. Make sure the same service set identifier is specified for all stations that need to join the same ad hoc network. Set up one station to establish a BSS and wait briefly before setting up other stations. This prevents several stations from trying to establish a BSS at the same time, which can result in multiple singular BSSs being established, rather than a single BSS with multiple stations associated to it. 9-1 4. The station cannot access the Internet in the infrastructure configuration. Make sure the station is associated and joined with the AP. If Wired Equivalent Privacy (WEP) security is enabled on the AP, the station must have the proper WEP keys specified. Also make sure TCP/IP properties are correctly configured. 9-2 A Channel and Data Rate Selection This section provides basic information for selecting fixed data rate and channel frequency in the NDIS driver. This becomes necessary if you want to test the D-Link Wireless Network Adapter at a specific channel with the rate adaptation controls turned off. To select channel frequency and data rate in the Windows environment with NDIS driver installed:
1. Choose Start > Run, and type regedit to open Registry Editor. 2. For Windows 2000 and Windows XP, locate the following registry key, and select Find from the Edit menu:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\
For Windows 98SE and Windows Me, locate the following registry key, and select Find from the Edit menu:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\
3. Type clist and click Find Next to find the registry key. Note that if you have multiple instances of the D-Link Wireless Network Adapter installed, for example, the NDIS driver is installed more than once, then you will need to click Find Next to locate the current instance of the device that is in use. 4. Double-click on clist and enter the channel number in the Value Data field. Enter the IEEE channel number from the following table. For example, enter 40 to select channel frequency of 5.20 GHz. The channel numbers follow the IEEE format where:
Channel Frequency (in GHz) = 5 + 0.005 * (Channel Number) Channel Number Channel Frequency 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 5.13 GHz 5.14 GHz 5.15 GHz 5.16 GHz 5.17 GHz 5.18 GHz 5.19 GHz 5.20 GHz 5.21 GHz 5.22 GHz 5.23 GHz 5.24 GHz 5.25 GHz 5.26 GHz 5.27 GHz 5.28 GHz 5.29 GHz 5.30 GHz 5.31 GHz 5.32 GHz 5.33 GHz 5.34 GHz 5.35 GHz 5.36 GHz 5.37 GHz 5.38 GHz 5.39 GHz 5.40 GHz Regulator Domain N/A (not calibrated) N/A (not calibrated) N/A (not calibrated) N/A (not calibrated) TELEC FCC TELEC FCC TELEC FCC TELEC FCC N/A (not calibrated) FCC N/A (not calibrated) FCC N/A (not calibrated) FCC N/A (not calibrated) FCC N/A (not calibrated) N/A (not calibrated) N/A (not calibrated) N/A (not calibrated) N/A (not calibrated) N/A (not calibrated) N/A (not calibrated) N/A (not calibrated) Channel Number Channel Frequency 82 84 86 5.41 GHz 5.42 GHz 5.43 GHz Regulator Domain N/A (not calibrated) N/A (not calibrated) N/A (not calibrated) 5. To select the fixed data rate at which you want the station to transmit, double-click on rateCtrlEnable from the same registry key location where clist resides, and enter 0 to disable rate adaptation. Double-click on TransmitRate and enter the value specified in the following table to select the actual data rate. For example, enter 3 for 18 Mbps. Rate Number Data Rate 0 1 2 3 4 5 6 7 6 Mbps 9 Mbps 12 Mbps 18 Mbps 24 Mbps 36 Mbps 48 Mbps 54 Mbps 6. For the changes to take effect:
If you are running Windows 98SE or Windows Me, close Register Editor and restart the systems. If you are running Windows 2000 or Windows XP, unload and load the driver from LinkMon. 7. To undo these changes and go back to normal operation where the channel and data rate are dynamically set, change rateCtrlEnable to 1 and clear the clist value.
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2002-02-24 | 5210 ~ 5290 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2002-02-24
|
||||
| 1 | Applicant's complete, legal business name |
D-Link Corporation
|
||||
| 1 | FCC Registration Number (FRN) |
0007371172
|
||||
| 1 | Physical Address |
17595 Mt. Herrmann
|
||||
| 1 |
Fountain Valley, California 92708
|
|||||
| 1 |
United States
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
h******@AmericanTCB.com
|
||||
| 1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
KA2
|
||||
| 1 | Equipment Product Code |
2001120011-1
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
B******** A******
|
||||
| 1 | Title |
General Counsel
|
||||
| 1 | Telephone Number |
714-8********
|
||||
| 1 | Fax Number |
866-7********
|
||||
| 1 |
b******@dlink.com
|
|||||
| app s | Technical Contact | |||||
| 1 | Firm Name |
Elliott Labs
|
||||
| 1 | Name |
M****** B******
|
||||
| 1 | Physical Address |
684 W. Maude Ave
|
||||
| 1 |
Sunnyvale, California 94085
|
|||||
| 1 |
United States
|
|||||
| 1 | Telephone Number |
408-2********
|
||||
| 1 | Fax Number |
408-2********
|
||||
| 1 |
m******@elliottlabs.com
|
|||||
| app s | Non Technical Contact | |||||
| 1 | Firm Name |
Elliott Labs
|
||||
| 1 | Name |
J****** S****
|
||||
| 1 | Physical Address |
684 W. Maude Ave.
|
||||
| 1 |
Sunnyvale, California 94085
|
|||||
| 1 |
United States
|
|||||
| 1 | Telephone Number |
408-2********
|
||||
| 1 | Fax Number |
408-2********
|
||||
| 1 |
d******@elliottlabs.com
|
|||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless LAN CardBus PC Card | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Power Output listed is Conducted. The installation and operating configurations of this transmitter, including the antenna gain, must satisfy MPE Categorical Exclusion Requirements of 2.1091. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
Elliott Laboratories LLC
|
||||
| 1 | Name |
D**** B********
|
||||
| 1 | Telephone Number |
408-2********
|
||||
| 1 | Fax Number |
408-2********
|
||||
| 1 |
d******@elliottlabs.com
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15E | 5180 | 5320 | 0.021 | 20 ppm | |||||||||||||||||||||||||||||||||||
| 1 | 2 | 15E | 5210 | 5290 | 0.028 | 20 ppm | |||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC