Approval Sheet
USER MANUAL
Project Name Approval Sheet RVE. Model NO. Panasonic Part NO. WIFI Module 1.1 WF4101-R0 C5ZZZ0000096 Prepared by Mickey Reviewed by Ye dongcheng Approved by Wen qing 1.RevisionHistory
Date
Document revision
Change Description
2014-10-30
2014-11-26
REV1.0
REV1.1
The first edition
Increasingthecrystalmatch
report
2.ManufacturingInformation
Manufacture Country:
Made in china Manufacturer:
Company Name: DaLian Golden Hualu Digital Technology Co., Ltd Manufacturer Address:
No.1 Hua Road, Dalian High-Tech Industrial Zone, Dalian, China.
3.ProductOverview
The WF4101-R0 802.11b/g/n module provides wireless modem functionality utilizing direct sequence spread spectrum and OFDM/CCK technologyThis module is based on Mediatek MT7601 solution which is integrated 2.4GHz IEEE802.11 b/g/n (MAC /baseband
/radio) and power amplifiers (PA).
3.1Applicationscope
The wireless LAN is compliant to IEEE802.11b and IEEE802.11g and IEEE802.11n standard. The data rate of 802.11b is up to 11Mbps and fallback rates of 5.5, 2,
1Mbps.The data rate of 802.11g is up to 54Mbps and fallback rates of 48, 36, 24, 18, 12, 9, 6Mbps.The data rate of 802.11n HT20 with 800ns Gl is up to 65Mbps and fallback rates of 58.5, 52, 39, 26, 19.5, 13, 6.5Mbps; the data rate of 802.11n HT20 with 400ns Gl is up to 72.2Mbps and fallback rates of 65, 57.8, 43.3, 28.9, 21.7, 14.4, 7.2Mbps ;The data rate of 802.11n HT40 with 800ns Gl is up to 135Mbps and fallback rates of121.5, 108, 81, 54, 40.5, 27, 13.5Mbps.The data rate of 802.11n HT40 with 400ns Gl is up to 150Mbps and fallback rates of 135, 120, 90, 60, 45, 30, 15Mbps. This module is installed as a client device in BD Player PF and so on.
3.2Regulationofeachcountries
CE:
Applied Standard: EN 300 328 V1.8.1 STANDARD Test Item and Limit 4.3.1 4.3.2 4.3.3 4.3.4 4.3.5 4.3.6 4.3.7 EN60950-1:2006+A11:20 09+A1: 2010 EN 301489-1 V1.8.1
(2008-04) EN 301489-17 V2.1.1
(2009-05) TRANSMITTER PARAMETERS Equivalent isotropic Radiated Power Peak Power Density ( DSSS, OFDM Equipment ) Frequency Range of Equipment Using Other Forms Of Modulation Medium Access Protocol Spurious Emissions (Operating) Spurious Emissions (Standby) RECEIVER PARAMETERS Spurious Emissions Safety EMC EU NB (0560) Certificate by Telefication
Note: Above regulations are representative examples. The module should get an approval by more countries.
4.ModuleHardwareOverview
4.1Blockdiagram
The general H/W architecture is shown below Figure 4.2Features
IEEE802.11b/g/n (1X1) based on MediaTek MT7601 solution, support HT40;
USB 2.0 Interface, High and Full Speeds supported;
Module is powered by the host with a 5.0V +/- 5% supply;
One PCS PCB printed antenna;
Two layers through hole PCB design with halogen free FR4 material Advanced Security: Supports 64/128 WEP, WPA/WPA2, WPA-PSK/WPA2-PSK
(TKIP/AES) 4.3InterfaceandConnector
Pin definition:
Pin Number Symbol Name Status 1 2 3 4 S1 S2 VSS D+
D-
VDD GND GND 5.ElectricalSpecification
5.1Absolutemaximumrating
Element Symbol DC supply voltage VDD Min 4.5 5.2Recommendedoperatingrating
Element Symbol DC supply voltage VDD Min 4.75 I/O I/O P Typ 5.0 Typ 5.0 Pin definition Ground USB positive date USB negative date USB +5v power input Ground Ground Max 5.5 Max 5.25 Unit
(V) Unit
(V)
5.3DCCharacteristics
Symbol VDD Parameter Supply voltage Tx Current(1M/14dBm) Tx Current(6M/14dBm) Tx Current(11M/14dBm) Tx Current(54M/14dBm) Tx Current(MCS0/14dBm/HT20) Tx Current(MCS0/12dBm/HT40) Tx Current(MCS7/14dBm/HT20) Tx Current(MCS7/12dBm/HT40) Rx Current Min 4.75
Typ 5.0 190 180 175 130 185 175 130 115 75 Max 5.25 255 245 230 170 245 230 170 150 100 Unit
(V)
(mA)
(mA)
(mA)
(mA)
(mA)
(mA)
(mA)
(mA)
(mA) 5.4ESDInformation
Mode HBM MM Level
+/-2K
+/-200 Unit V V 5.5EnvironmentStorageCondition
Temperature Humidity Environment condition Operating Temperature0 deg.C ~ 55 deg.C Storage Temperature-40 deg.C ~ 80 deg.C Operating Humidity: 20% ~ 90%
Storage Humidity: 20% ~ 90%
6.MechanicalSpecifications
6.1ShieldingCoverDimension
Dimension (LXWXH): 30.91mm x 18.28mm x 2mm MATERIAL: Copper-Nickel-Zinc Alloy Thickness: 0.2mm
6.2PCBAssemblyDimension
Dimension(WL): 55mm20mm PCB Two layer HF-FR4 design
Component Placement On Top Layer
7.Schematics
8.LayoutPattern
TOP Layer
Bottom Layer Top View
Bottom View Description:
RoHS mark PCB Vendor Logo Manufacturing Data code (2014 Year, 42 week) PCB Vendor material certification number UL Number Flammability UL Logo
9.Labelinformation
9.1MACIDLabel
Label stick position:
(Picture just for reference)
10.Packageinformation
10.1CartonASSY
12.Efusecontent
IP means interpolation Address Register Name 00h 02h 04h 06h 08h 0Ah 0Ch 0Eh 10h 12h 14h CHIP ID EEPROM Version Mac Address(15:0) Mac Address(31:16) Mac Address(47:32) Reserved Reserved Reserved ASIC Reserved USB descriptor:Vendor ID USB descriptor:Product ID
Value 7601 0D00 Unique Unique Unique FFFF FFFF FFFF 0201 04DA 23FC
16h 18h 1Ah 1Ch 1Eh 20h 22h 24h 26h 28h 2Ah 2Ch 2Eh 34h 36h 38h 3Ah 3Ch 3Eh 40h 42h 44h 46h 48h 4Eh 50h 52h 54h 56h 58h 5Ah 5Ch 5Eh 6Eh 70h 75h D0h DAh DEh E0h E2h E4h ASIC Reserved ASIC Reserved ASIC Reserved ASIC Reserved ASIC Reserved ASIC Reserved ASIC Reserved ASIC Reserved USB String lndex Head USB String lndex USB String lndex USB String lndex USB String lndex NIC Configuration 0 NIC Configuration 1 Country Region 2.4G band LED Mode Reserved Reserved Reserved NIC Configuration 2 Extemal LNA gain for 2.4G Band 2.4G RSSIO offset TX mixer gain setting for 2.4Ghz BAND Reserved for use 20M/40M BW Power delta for 2.4G band Channel 2 TX0 power (ALC) Channel 4 TX0 power (ALC) Channel 6 TX0 power (ALC) Channel 8 TX0 power (ALC) Channel 10 TX0 power (ALC) Channel 12 TX0 power (ALC) Channel 14 TX0 power (ALC) TX0 TSSI offset for group0 TX0 TSSI offset for group2 2.4G TSSL OFFSET COMPENSATION 25C TEMP SENSOR CALIBRABON Frequenoy offset compensation TX power for CCK 5.5M/11M TX power for OFDM 12M/18M TX power for OFDM 48M/54M TX power for HT MCS=2,3 0000 004A 0001 5080 0008 0003 0002 0000 01FF 6040 FF80 FFFF FFFF FF11 1004 FFFF 012C FFFF 9999 888C 07FF 0008 0000 0000 0000 0083 0000 0000 0000 0000 0000 0000 0000 0080 0000 0000 F920 0000 0002 3A3A 3B3B 3A3A
E6h E8h EAh ECh EEh 110h 112h 114h 116h 118h 11Eh 140h-17fh TX power for HT MCS=6,7 TX power for HT MCS=10,11 TX power for HT MCS=14,15 TX power for STBC MCS=2,3 TX power for STBC MCS=6,7 Reserved for Customer Reserved for Customer Reserved for Customer Reserved for Customer Configured 2.4G Channels Reserved for Customer USB String Descriptor 3C3C 0000 0002 0000 0002 FFFF FFFF FFFF FFFF FFFF FFFF FFFF
13.ReliabilityTestReport
Package Reliability Test Report
NO. Item Test Condition Unit Test Period Test Result 1 Package Drop Tset 1m.one corner,three edges,six faces 1 carton 2 Package Shock Test Mximum Acceleration is 200G Duration time is 2ms 3 times per each Direction then totall 3 x 6 directions =
1 carton 18 times 3 Package Vibration Test 1 carton Package Storage at High Temperature and 4 High Humidity Temperature:60 Humidity:90%R.H Duration:120hrs 1 carton 1.Visual Inspection-Match with IPC-A-610D 2. Function test Pass 1.Visual Inspection-Match with IPC-A-610C 2. Function test Pass 1.Visual Inspection-Match with IPC-A-610C 2. Function test Pass 1.Visual Inspection-Match with IPC-A-610C 2. Function test Pass Pass Pass Pass Pass
15.AntennaSpecification
16.FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement The modular can be installed or integrated in mobile or fix devices only. This modular cannot be installed in any portable device, for example, USB dongle like transmitters is forbidden. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This modular must be installed and operated with a minimum distance of 20 cm between the radiator and user body. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: 2ADKJWF4101 Or Contains FCC ID:
2ADKJWF4101
when the module is installed inside another device, the user manual of this device must contain below warning statements;
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product Canada Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le fonctionnement. le brouillage est susceptible d'en compromettre IC Radiation Exposure Statement The modular can be installed or integrated in mobile or fix devices only. This modular cannot be installed in any portable device, for example, USB dongle like transmitters is forbidden. This modular complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This modular must be installed and operated with a minimum distance of 20 cm between the radiator and user body. Cette modulaire doit tre install et utilis une distance minimum de 20 cm entre le radiateur et le corps de l'utilisateur. If the IC number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains IC:
12493A-WF4101 when the module is installed inside another device, the user manual of this device must contain below warning statements;
1. This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. 2. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement est soumis aux deux conditions suivantes :
( 1 ) Ce dispositif ne peut causer d'interfrences ; et
( 2 ) Ce dispositif doit accepter toute interfrence , y compris les interfrences qui peuvent causer un mauvais fonctionnement de l'appareil. The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product.
17.NCC
XXXyyyLPDzzzzx
MPE 1mW/CM2
0.05444mW/CM2