DANLAW PICOLOGGER DL910 USER MANUAL Revision: Draft Revision date: 22 May 2018 1.1 Product Overview Danlaw PicoLogger Vehicle PicoLogger with Bluetooth to Danlaws PicoLogger was developed to provide companies with an easy install, wireless communication device for monitoring and logging vehicle network message data. The need for the PicoLogger was driven by Danlaws own experience with Networked Automotive Electronics solution development, and perfected to provide our customers with the benefits of our experience. The Danlaw PicoLogger provides:
Support for all major passenger car & light truck protocols Simple plug-n-go via connector the vehicles OBDII OBD Vehicle Data logging with real-time data stamp Rugged, compact field-hardened design No external antenna connections needed Completely self-contained Danlaw PicoLogger - Advantage DL910 Features:
High Speed Data Upload PicoLogger has been demonstrated to significantly reduce the Data Upload time as compared to the speed of other wired and wireless OBDII interface solutions. Stand Alone Simplicity Easy plug in and even easier to use. No external connections needed. Eliminates the need for costly power adapters, antenna connections and knowledgeable resources to install the module. Portability The PicoLogger has been designed to maximize in-the-
field efficiency, light weight, robust, and compact design. Low Cost Solution Low data transmission cost due to optimized data transmission, cost effective hardware no maintenance and no batteries. Rugged Design (-40C to +85C), its field ready. Flexible Supports all major OEMs including: GM, Ford, DCX, Honda, Toyota, Nissan, BMW, Audi, Volvo and more. 1.2 Product Specifications Danlaw PicoLogger - Specifications OPERATING VOLTAGE:
9 V DC to 24 V DC (Surge up to 32V) POWER CONSUMPTION:
TEMPERATURE RANGE:
< 100 mA @ 12VDC (Data Upload) <
3 mA Average (during Sleep mode)
-40 C to +85 C (operating) HUMIDITY:
90% RH non-condensing CERTIFICATIONS:
RoHS Compliant VEHICLE COMMUNICATION:
Vehicle Protocol Support:
GMLAN, FNOS, ISO-9141-2, SAE J1850 VPW, SAE J1850 PWM, ISO 14230-4, ISO 15765 (11bit CAN & 29bit CAN), SW CAN Vehicle Message Data:
PHYSICAL DIMENSIONS:
Time Stamped Event and Vehicle Message Bus Data Recording including:
(All OEM Supported OBDII Data including: VIN, ODO, Time &Date, Vehicle Speed, module connect/disconnect events) Ultra Compact PACKAGING:
Danlaw PicoLogger Enclosure (IP 64 rated) INSTALLATION TIME:
NUMBER OF TRIPS:
10 Seconds Unlimited DATA RECORDING INTERVAL:
Selectable (1 Hz and up) FCC ID: 2AD9I-DL910 IC : 24046-DL910 Model: DL910 This device complies with Part 15 of the FCC Rules and with Industry Canada license-
exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Note: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. 2.0 Installation Instructions 1Locate the OBD connector. If you are not able to locate the OBD connector, please refer to the Vehicle User Mannual 2, Install the DL910 device by plugging it into the OBD connector 3, PicoLogger Ecosystem is a technology suite that provides a flexible groundwork for application development. The PicoLogger Ecosystem consists of Danlaws award winning PicoLogger, Gateway, Smart Connect, and Vision products. Use our devices, data hosting, and app platform for a complete package thats easy to build on. Our customizable integration options will have you interacting with your customers in no time. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 3.0 Revision History 22 May 2018 Draft Release