FCC ID: U4FTBII Wireless Equipment

by: Datalogic S.r.l. latest update: 2019-08-30 model: TBII

Twenty grants have been issued under this FCC ID from 12/28/2018 to 08/30/2019 (this is one of twenty releases in 2019 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked password defaults, warrantee terms, troubleshooting guides, instructions, & drivers.
permalink for this FCC identifier
|
|
|   
eg for Slack usage
app s submitted / available
various User Manual Users Manual pdf 720.27 KiB April 06 2019 / May 06 2019
various Users Manual qsg Users Manual pdf 1000.54 KiB
various Users Manual ra us Users Manual pdf 1.29 MiB
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various FCC10 Inch - internal pictures Internal Photos pdf 2.91 MiB
various FCC7 Inch - internal pictures Internal Photos pdf 2.72 MiB
various ID Label/Location Info pdf
various Cover Letter(s) pdf
various Parts List/Tune Up Info pdf
various Parts List/Tune Up Info pdf
various Test Report pdf
various RF Exposure Info pdf
various Cover Letter(s) pdf
various Test Report pdf
various Test Report pdf
various Cover Letter(s) pdf April 06 2019 / May 06 2019
various External Photos pdf April 06 2019 / May 06 2019
various Internal Photos pdf April 06 2019 / May 06 2019
various ID Label/Location Info pdf April 06 2019 / May 06 2019
various RF Exposure Info pdf April 06 2019 / May 06 2019
various RF Exposure Info pdf April 06 2019 / May 06 2019
various RF Exposure Info pdf April 06 2019 / May 06 2019
various RF Exposure Info pdf April 06 2019 / May 06 2019
various RF Exposure Info pdf April 06 2019 / May 06 2019
various Cover Letter(s) pdf May 06 2019
various ID Label/Location Info pdf May 06 2019
various Cover Letter(s) pdf January 02 2019
various Test Setup Photos pdf January 02 2019
various Test Report pdf January 02 2019
various Test Report pdf January 02 2019
various Test Setup Photos pdf January 02 2019
various Test Setup Photos pdf January 02 2019
various Test Setup Photos pdf January 02 2019
various Cover Letter(s) pdf
various ID Label/Location Info pdf
various Cover Letter(s) pdf
various User Manual Users Manual pdf 720.27 KiB April 06 2019 / May 06 2019
various Users Manual qsg Users Manual pdf 1000.54 KiB
various Users Manual ra us Users Manual pdf 1.29 MiB
various FCC10 Inch - internal pictures Internal Photos pdf 2.91 MiB
various FCC7 Inch - internal pictures Internal Photos pdf 2.72 MiB

frequency equipment class purpose
1 2019-08-30 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
2 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
3 2412 ~ 2462 DTS - Digital Transmission System
4 JBP - Part 15 Class B Computing Device Peripheral
5 2019-06-05 JBP - Part 15 Class B Computing Device Peripheral Class II permissive change or modification of presently authorized equipment
6 2412 ~ 2472 DTS - Digital Transmission System
7 5260 ~ 5320 NII - Unlicensed National Information Infrastructure TX
8 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
9 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
10 2412 ~ 2472 DTS - Digital Transmission System
11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
12 JBP - Part 15 Class B Computing Device Peripheral
13 2019-02-01 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
14 JBP - Part 15 Class B Computing Device Peripheral
15 2402 ~ 2480 DTS - Digital Transmission System
16 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
17 2018-12-28 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ258ACNBT Grant Date: 09/08/2017
18 JBP - Part 15 Class B Computing Device Peripheral
19 2422 ~ 2462 DTS - Digital Transmission System
20 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter

Application Forms

app s Applicant Information
various Effective 2019-08-30
various 2019-06-05
various 2019-02-01
various 2018-12-28
various Applicant's complete, legal business name Datalogic S.r.l.
various FCC Registration Number (FRN) 0016179699
various Physical Address Via S. Vitalino 13
various Calderara di Reno, N/A
various Calderara di Reno, N/A 40012
various Italy
app s TCB Information
various TCB Application Email Address c******@telefication.com
various t******@timcoengr.com
various s******@nemko.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code U4F
various Equipment Product Code TBII
app s Person at the applicant's address to receive grant or for contact
various Name R****** C******
various Title Product Quality Leader
various Telephone Number +39 0******** Extension:
various Fax Number +39 0********
various E-mail r******@datalogic.com
app s Technical Contact
various Firm Name 7layers GmbH
various Name D****** B********
various Physical Address BosigstraBe 11, Ratingen, NRW
various Germany
various Telephone Number 49 21********
various Fax Number 49 21********
various E-mail d******@7layers.com
app s Non Technical Contact
various Firm Name 7layers GmbH
various Name D******** B****
various Physical Address BosigstraBe 11, Ratingen, NRW
various Germany
various Telephone Number 49 21********
various Fax Number 49 21********
various E-mail d******@7layers.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassNII - Unlicensed National Information Infrastructure TX
variousDSS - Part 15 Spread Spectrum Transmitter
variousDTS - Digital Transmission System
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Wireless Equipment
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeLimited Single Modular Approval
variousSingle Modular Approval
variousPurpose / Application is forClass II Permissive Change
variousClass II permissive change or modification of presently authorized equipment
variousChange in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ258ACNBT Grant Date: 09/08/2017
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsClass II Permissive Change : This change is to incorporate this Module into Industrial Tablet PCs(Product name : Taskbook 7" and Taskbook 10") with lower gain value antennas as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission conditions are 1.32 W/kg and 1.51 W/kg respectively. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive Change : This change is to incorporate this Module into Industrial Tablet PCs(Product name : Taskbook 7" and Taskbook 10") with lower gain value antennas as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for simultaneous transmission exposure condition is 1.18 W/kg. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive Change : This change is to incorporate this Module into Industrial Tablet PCs(Product name : Taskbook 7" and Taskbook 10") with lower gain value antennas as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission conditions are 0.48 W/kg and 1.51 W/kg respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive Change : This change is to incorporate this Module into Industrial Tablet PCs(Product name : Taskbook 7" and Taskbook 10") with lower gain value antennas as described in this filing.
variousClass II Permissive Change: Integration into Industrial Tablet PC Host (Model Taskbook (7)).
variousClass II Permissive Change: Integration into Industrial Tablet PC Host (Model Taskbook (7)). Limited Modular Approval. Output Power listed is the maximum combined conducted output power. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.64 W/kg and 0.64 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes.
variousClass II Permissive Change: Integration into Industrial Tablet PC Host (Model Taskbook (7)). Limited Modular Approval. Output Power listed is the maximum combined conducted output power. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.19 W/kg and 1.30 W/kg, respectively. This device supports 20, 40 and 80 MHz modes.
variousClass II Permissive Change: Integration into Industrial Tablet PC Host (Model Taskbook (7)). Limited Modular Approval. Output Power listed is the maximum conducted output power.
variousClass II Permissive Change: Integration into Industrial Tablet PC Host (Model Taskbook (10)). Limited Modular Approval. Output Power listed is the maximum combined conducted output power. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.19 W/kg and 1.33 W/kg, respectively. This device supports 20, 40 and 80 MHz modes.
variousClass II Permissive Change: Integration into Industrial Tablet PC Host (Model Taskbook (10)). Limited Modular Approval. Output Power listed is the maximum combined conducted output power. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.19 W/kg and 1.19 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes.
variousClass II Permissive Change: Integration into Industrial Tablet PC Host (Model Taskbook (10)). Limited Modular Approval. Output Power listed is the maximum conducted output power.
variousClass II Permissive Change: Integration into Industrial Tablet PC Host (Model Taskbook (10)).
variousOutput power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value was < 0.1W/Kg. Class II Permissive Change: address to add additional antenna as documented in this filing.
variousClass II Permissive Change: address to add additional antenna as documented in this filing.
variousOutput power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.77 W/kg and 0.77 W/kg respectively. Class II Permissive Change: address to add additional antenna as documented in this filing.
variousOutput power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.32 W/kg and 0.32 W/kg respectively. Class II Permissive Change: address to add additional antenna as documented in this filing.
variousOutput power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.32 W/kg and 0.32 W/kg respectively.
variousOutput power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.77 W/kg and 0.77 W/kg respectively.
variousOutput power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value was < 0.1W/Kg.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name 7layers GmbH
various Sporton International Inc.
various SPORTON International Inc.
various Name B******** R****
various A******** C****
various A**** C******
various Telephone Number 0049 ********
various 88633********
various 886-3********
various 886-3******** Extension:
various Fax Number 0049 ********
various +886-********
various 886-3********
various E-mail B******@7layers.com
various a******@sporton.com.tw
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC MO 5180 5240 0.072
1 2 15E CC MO 5260 5320 0.066
1 3 15E CC MO 5500 5720 0.073
1 4 15E CC MO 5745 5825 0.078
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC MO 2412.00000000 2462.00000000 0.5240000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC MO 2412.00000000 2472.00000000 0.5240000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15E CC MO 5180 5240 0.072
7 2 15E CC MO 5260 5320 0.066
7 3 15E CC MO 5500 5720 0.073
7 4 15E CC MO 5745 5825 0.078
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15E CC MO 5180 5240 0.072
9 2 15E CC MO 5260 5320 0.066
9 3 15E CC MO 5500 5720 0.073
9 4 15E CC MO 5745 5825 0.078
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC MO 2412.00000000 2472.00000000 0.5240000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15B
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402 2480 0.003
15 2 15C CC MO 2412 2472 0.524
15 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15E CC MO 5180 5240 0.072
16 2 15E CC MO 5190 5230 0.06
16 3 15E CC MO 5210 5210 0.014
16 4 15E CC MO 5260 5320 0.066
16 5 15E CC MO 5270 5310 0.057
16 6 15E CC MO 5290 5290 0.02
16 7 15E CC MO 5500 5720 0.073
16 8 15E CC MO 5510 5710 0.054
16 9 15E CC MO 5530 5690 0.047
16 1 15E CC MO 5745 5825 0.078
16 11 15E CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15E CC MO 5180 5240 0.072
17 2 15E CC MO 5190 5230 0.06
17 3 15E CC MO 5210 5210 0.014
17 4 15E CC MO 5260 5320 0.066
17 5 15E CC MO 5270 5310 0.057
17 6 15E CC MO 5290 5290 0.02
17 7 15E CC MO 5500 5720 0.073
17 8 15E CC MO 5510 5710 0.054
17 9 15E CC MO 5530 5690 0.047
17 1 15E CC MO 5745 5825 0.078
17 11 15E CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15C CC 2402 2480 0.003
19 2 15C CC MO 2412 2472 0.524
19 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15C CC 2402.00000000 2480.00000000 0.0200000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC