This quickstart guide provides basic instructions for setting up and using your SRS2i Stick Reader. Contents Unpacking the box .................................. 1 Charging the battery ................................ 2 Getting around ........................................ 2 Recording EID tags .................................. 3 Bluetooth connection............................. 5 Viewing sessions ..................................... 6 Getting information off ............................ 7 Datamars Livestock cloud software .......... 8 Getting help ............................................ 9 Modifying settings ................................. 10 Maintenance and servicing .................... 13 Compliance ........................................... 14 For further information, view the reference information on the supplied USB stick or visit tru-test.com The Datamars Livestock Help Centre provides searchable articles and videos to help you when you need it. The Help Centre provides instant support for our apps, software and products. Access the help centre via the mobile phone app or go to support.livestock.datamars.com a 1 Unpacking the box Check that you have all of these items. If anything is missing, contact your supplier. SRS2i stick reader (the stick reader) USB stick contains Data Link PC software and reference information. USB cable for charging. It also connects the stick reader to a PC. Mains power adaptor and power plugs for different countries. 1 2 2 Charging the battery Use only the power adaptor and cables supplied. Do not charge the battery if the temperature is less than 5 C (41 F), or greater than 40 C (104 F). 3 Getting around Parts of the stick reader The Home screen When you first switch on the stick reader, the Home screen is displayed:
Scroll through the options using the arrow keys and choose an option using the Select button. and 4 Recording EID tags Ways of using the stick reader The stick reader can be used in two ways:
1. Standalone - the stick reader saves each scanned tag in its internal memory. These records can be transferred afterwards, as described in Section 7 Getting information off. 2. Connected the EID reader immediately transmits every scanned tag to a connected device, such as a weigh scale indicator. 3 Recording EID tags (standalone) You should start a new session file each time you begin a new scanning session. to switch on the stick reader. 1. Press 2. On the Home screen, press 3. Press
. 4. Press the Read button while holding the stick reader near to an EID tag. and select New Session. When scanning EID tags, if animals are moving quickly through a race or into a pen, you can hold down the Read button continuously. Scanning will stop when the Read button is released. Displaying VIDs (visual IDs) during scanning EID/VID pairs can be transferred from the PC to the stick reader prior to scanning using the Data Link PC software. This means that when an animal's EID tag is scanned, the corresponding VID number will be displayed automatically. 4 5 Bluetooth connection The stick reader will automatically connect to any Tru-Test Bluetooth enabled weigh scale indicator, or any other device, with which it has previously been paired
(when in BT Auto mode - default). In order to manually establish a Bluetooth wireless connection (if you are using a non-Tru-Test weigh scale indicator, or you are having trouble establishing a Bluetooth wireless connection):
1. With both devices off, position the stick reader close to the other 2. Switch on the device and, if necessary, check that its Bluetooth device. setting is enabled. 3. Switch on the stick reader. 4. Select Settings, then Bluetooth to display the Bluetooth Settings screen. 5. Select Search for devices. A list of available devices will be displayed. 6. Select a device. Wait for up to one minute until the two devices are paired. When pairing is complete, the Bluetooth indicator light above the Read/Select button will illuminate blue. 7. Use the stick reader to scan an EID tag in order to test the connection. Always turn on the device you are trying to pair with first, BEFORE the stick reader. 5 6 Viewing sessions You can view information collected during a session in the Sessions screen. to go to the Home screen. 1. If necessary, press 2. Select Sessions. A list of sessions is displayed. 3. Select a session to view:
6 7 Getting information off There are two ways to get information off the stick reader. Data Link PC software You can:
save session files. register a transaction with NAIT (NZ) or NLIS (Australia). upload sessions to Datamars Livestock. Data Link app for mobile devices To do this:
1. Connect the stick reader to a PC using the cable supplied. 2. Launch Data Link on your PC. 3. Click to get information off the stick reader. You can:
email a session file. register a transaction with NAIT (NZ) or NLIS (Australia). upload sessions to Datamars Livestock. To do this:
Launch the app on your smartphone and follow the instructions. The Tru-Test Data Link app is available to download for free from the Google Play* store (Android* devices) or the Apple App store* (Apple iOS*). 7 Datamars Livestock cloud software View your data online, anywhere, with Datamars Livestock. Datamars Livestock allows you to monitor animal weight gains and track performance to target weights. Monitor animals in groups, and act early if they fall behind target; or track individually to identify top performers and slow growing stock. livestock.datamars.com 8 Getting help Help articles and videos The Datamars Livestock Help Centre provides searchable articles and videos to help you when you need it. The help centre provides instant support for our apps, software and products. Access the help centre via the mobile phone app or go to support.livestock.datamars.com Some topics in the Datamars Livestock Help Centre are available in [language French, German, Spanish, Portuguese]
The Datamars Livestock Training academy is available in
[language French, German, Spanish, Portuguese]
Online training The Datamars Livestock Training Academy provides easy, accessible online training modules. You can work at your own pace to learn about our products and solutions. Register for free at livestock.datamars.com/training-academy 9 Online troubleshooting For personalised troubleshooting and advice, chat with us directly. In the mobile phone app, tap on Livestock Help Centre or in the Datamars Livestock Training Academy, click on in the bottom right-hand corner of the screen. On any of our websites, in the Datamars
, then Modifying settings When shipped, the stick reader is set up to simply scan EID tags. You can change the way that the stick reader is set up to suit the task that you are about to perform. Settings menu To modify the settings, from the Home screen, select Settings. After you have changed any settings, you can save these as your own custom favourite. You can then apply this favourite next time that you want to do the same task. General Change the Date/Time, Language/Country, Auto Off, Vibration and Buzzer settings. View the stick reader Firmware details. 10 Bluetooth Bluetooth Auto** Automatically connect to the Bluetooth enabled device most recently used or to a Tru-Test Bluetooth enabled weigh scale indicator. Off Turn off Bluetooth wireless connectivity. Manual Manually search for a Bluetooth enabled device and accept incoming Bluetooth connections. Search for Devices Manually search for a Bluetooth enabled device within range (see row above). Paired Devices Display previously connected (paired) devices. Advanced Connect Mode Default** set this mode to connect to weigh scale indicators and most software systems. HID (Human Interface Device) set this mode if you want the scanned EID tag to be automatically transmitted to a spreadsheet (e.g. Excel), or another device that has not directly integrated with the stick reader. Output Default** Leave this set to Default unless you have been instructed to change it by a Datamars representative. 11 Tag Reading Read Mode Standard** Press the Read button to scan a tag. Hold down the Read button to continuously scan tags. Continuous Press the Read button to continuously scan tags. Scanning will only stop when the Read button is pressed again. Single Press the Read button to scan a single tag. Even if you hold down the Read button, another tag will not be scanned. Tag Format - Format and example shown:
Decimal**
964 155000012939 Decimal2 964155000012939 Hex ISO ISO23 8000F66416B8808B 1000000964155000012939 A0000000964000000123456 (animal) or R0000000964000000123456 (non-animal) Allow Duplicates ISO Synchro No** Set to ensure that an EID is not recorded multiple times in the same session. Yes Set to allow EIDs to be recorded multiple times in the same session. On Set this mode to enable wireless synchronisation with panel readers. Off** Turn off wireless synchronisation with panel readers. Default settings marked **
12 Maintenance and servicing Backing up your information We strongly recommend that you regularly back up the data on your stick reader by transferring it to a PC using Data Link PC software. Updating your software We recommend that you regularly update the stick reader software so that you keep up with the latest features and improvements. To update the software:
1. Connect the stick reader to a PC using the cable supplied. 2. Launch Data Link on your PC. 3. Click Tools / Updates. 4. Follow the step-by-step instructions. For more information, see the Data Link help. When updating software, the data on your stick reader will remain intact. However, we strongly recommend that you transfer the information on your stick reader onto a PC before updating. Caring for the stick reader Wipe the stick reader clean using a damp cloth, warm water and soap. Other cleaners may damage the case or screen. Do not immerse the stick reader in water. Do not leave the stick reader where it may be exposed to extreme temperatures
(e.g. on the dashboard of a vehicle). Store the stick reader in a cool, dry place. Fit the dust cap when there are no cables connected to the stick reader. This will prevent moisture and dirt from entering the socket. 13 Europe - Instructions for disposal of product This symbol on the product or its packaging indicates that this product (and its batteries) must not be disposed of with other waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city recycling office or the dealer from whom you purchased the product. This product incorporates both a lithium-ion (LiNiMnCoO2) rechargeable battery and a lithium metal (CR1220 35 mAh) button/coin cell battery. For instructions on how to dismantle this product for recycling, email service.dept@datamars.com Compliance FCC notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
- Any changes or modifications not expressly approved by Datamars could void the user's authority to operate the equipment FCC warning Note: Users are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 14 Responsible party in the USA This product is supplied by:
Datamars Inc 528 Grant Road Mineral Wells Texas 76067 UNITED STATES Toll free: 800 874 8494 ISED Canada notice This radio transmitter, model SRS2i-1, has been approved by Innovation, Science and Economic Development Canada to operate only with its integral antenna. This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. UK declaration of conformity Hereby, Datamars declares that the radio equipment type SRS2i-1 is in compliance with the relevant statutory requirements. The full text of the declaration of conformity is available at the following internet address http://livestock.tru-test.com/en/compliance EU declaration of conformity Hereby, Datamars declares that the radio equipment type SRS2i-1 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://livestock.tru-
test.com/en/compliance UK Importer:
Datamars UK, Pheasant Mill, Dunsdale Rd, Selkirk TD7 5DZ, United Kingdom EU Importer:
Datamars Slovakia s.r.o. Doln Hony 6, 949 01 Nitra, Slovak Republic This radio equipment emits a maximum of 0.7 mW e.i.r.p. in the frequency band 134.18 to 134.22 kHz and a maximum of 18 mW e.i.r.p. in the frequency band 2.40 to 2.48 GHz. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Datamars SA and its subsidiaries is under license. Other trademarks and trade names are those of their respective holders. All trademarks with an * are neither owned by nor licensed to Datamars SA and belong to their respective owners. 15