LCD MONITOR USER'S MANUAL LCD MONITOR USER'S MANUAL
. Parts Description Connecting a PC 15 17 18.1 POWER VGA S-VIDEO VIDEO IN R L AUDIO IN OUT PC AUDIO TV ANT VGA DC POWER TV ANT S-VIDEO VIDEO L R AUDIO IN OUT AUDIO 1. Turn off your computer and monitor. 2. Connect a PC D-Sub (VGA) cable between your PC and VGA of the monitor. And then fasten the screws of both sides of the cable. 3. Connect a DC Power cable to the power input jack of the monitor. 4. Power on the computer before turning on the monitor. Parts Description Connecting the VCR, DVD, TV or Other External Device To view television channels correctly, a signal must be received by the set from one of following sources :
An outdoor aerial An indoor aerial (not recommendable) A cable television network 1. In the first three cases, connect the aerial or network input cable to the 75 ohm coaxial socket on the bottom of the television. 2. Press the TV mode button on the remote controller.
(TV Function is optional with users.) 15 17 18.1 POWER VGA S-VIDEO VIDEO IN L R AUDIO IN OUT PC AUDIO TV ANT VGA DC POWER TV ANT S-VIDEO VIDEO IN L AUDIO R IN OUT PC AUDIO 1. Connect video and audio cable according to the sharpe and color of the video/audio cable. When an external device is in MONO, the audio connection cable can be connected to either the left or the right and S.MODE should be set FM MONO. 2. For optimal visual image, use S-VIDEO connector instead of video (yellow) connector. LCD MONITOR USER'S MANUAL LCD MONITOR USER'S MANUAL
. Before using the monitor Instructions
- This monitor conforms to VESA DPMS regulations
- This monitor has tested and passed all the regulations regarding electromagnetic interference
- The LCD panel consists of 3,8403,072 dots so some dots can be seen as bright or dark but never affects the monitor function
- The brightness of upper and lower part of the screen could be seen different because of viewing angle
- The optimum resolution is 1,2801,024 at 60Hz, so check with your PC graphic card
- When your display status is not good enough to look, press AUTO key
- There are VESA mount holes in the back of your monitor for wall-mount
- Please use only the adaptor supplied with the monitor otherwise you will not be able to receive free A/S when out of order
- There could be noises in particular graphic card of your PC, then adjust manually by changing the values of phase or clock
. Before using the monitor Initial set PC mode 1. Power on your monitor by pressing the POWER button on the main set or on the remote controller 2. Press the PC button on the remote controller to switch to the PC mode Then the PC screen is automatically set. When a CD-Title runs, the music can be heard from the speakers 3. Before operation, set the PC resolution by 12801024, and true color (15 1024768) POWER SELECT 1 4 7 SCAN PC VOL -
AUTO 2 5 8 0 CH MENU CH 3 6 9 EXIT TV VOL +
MUTE When the Screen is unstable or the TV channel does not change 1. Press MENU button, the main menu is displayed 2. Use , button, selectMISCELLANEOUS 3. Select initialize 4. Close the MENU window and press AUTO button 5. 15 is selectAUTO in the OSD menu window There will be some noises under the Certain VGA card. Whe n the noise would not disappear Auto adjustment, adjust manually. LCD MONITOR USER'S MANUAL LCD MONITOR USER'S MANUAL
. OSD MENU MONITOR OSD MENU
. OSD MENU MONITOR OSD MENU VIDEO/S-VIDEO OSD MENU TV OSD MENU Adjusts brightness BRIGHTNESS :
BRIGHTNESS :
CONTRAST :
CONTRAST :
Adjusts contrast COLOR CONTROL :
COLOR CONTROL :
- Adjusts the color temperature
- User can adjusts the color temperature by adjusting values of red, green, blue MISCELLANEOUS :
MISCELLANEOUS :
- INITIALIZE : Sets all the values to factory setting values
- OSD TIMER : Adjusts the OSD menu activating time (5 sec to 100 sec)
- OSD POSITION : Adjusts the horizontal / vertical position of OSD menu window SOUND :
SOUND :
- VOLUME : Adjusts the volume level of AMP
- MUTE : Set the speaker on or off
- TREBLE : Adjusts the treble
- BASE : Adjusts the base Auto adjusting AUTO (AUTO ADJUST) :
AUTO (AUTO ADJUST) :
LANGUAGE :
LANGUAGE :
Selects the language of OSD menu
(ENGLISH, FRANCE, DUTCH, ITALIANO, ESPANO, DEUTCH, SVENSKA, SUOMI, DANSK, PORTUGUES) H-V POSITION :
H-V POSITION :
- H. POSITION : Adjusts the horizontal position of picture
- V. POSITION : Adjusts the vertical position of picture CLOCK PHASE :
CLOCK PHASE :
- PHASE : Adjusts phase
- CLOCK : Adjusts clock INPUT :
INPUT :
Selects input signal
- RGB : PC signal select
- SVHS : SUPER VIDEO signal select
- COMPOSITE VIDEO : Composite signal select
- TV : TV signal select LCD MONITOR USER'S MANUAL LCD MONITOR USER'S MANUAL
. OSD MENU VIDEO / S-VIDEO OSD MENU
. OSD MENU TV OSD MENU BRIGHTNESS :
BRIGHTNESS :
Adjusts brightness CONTRAST :
CONTRAST :
Adjusts contrast COLOR ADJUST :
COLOR ADJUST :
- SATURATION : Adjusts the color
- TINT : Adjusts the tint
- SHARPNESS : Adjusts the sharpness MISCELLANEOUS :
MISCELLANEOUS :
- INITIALIZE : Sets all the values to factory setting values
- OSD TIMER : Adjusts the OSD menu activating time (5 sec to 100 sec)
- OSD POSITION : Adjusts the horizontal / vertical position of OSD menu window SOUND :
SOUND :
- VOLUME : Adjusts the volume level of AMP
- MUTE : Set the speaker on or off
- TREBLE : Adjusts the treble
- BASE : Adjusts the base (MISCELLANEOUS) Selects the language of OSD menu LANGUAGE :
LANGUAGE :
(ENGLISH, FRANCE, DUTCH, ITALIANO, ESPANO, DEUTCH, SVENSKA, SUOMI, DANSK, PORTUGUES) TV :TV :
Nonsupported INPUT :
INPUT :
Selects input signal
- RGB : PC signal select
- SVHS : SUPER VIDEO signal select
- COMPOSITE VIDEO : Composite signal select
- TV : TV signal select BRIGHTNESS :
BRIGHTNESS :
Adjusts brightness CONTRAST :
CONTRAST :
Adjusts contrast COLOR ADJUST :
COLOR ADJUST :
- SATURATION : Adjusts the color
- TINT : Adjusts the tint
- SHARPNESS : Adjusts the sharpness MISCELLANEOUS :
MISCELLANEOUS :
- INITIALIZE : Sets all the values to factory setting values
- OSD TIMER : Adjusts the OSD menu activating time (5 sec to 100 sec)
- OSD POSITION : Adjusts the horizontal / vertical position of OSD menu window SOUND :
SOUND :
- VOLUME : Adjusts the volume level of AMP
- MUTE : Set the speaker on or off
- TREBLE : Adjusts the treble
- BASE : Adjusts the base (MISCELLANEOUS) Selects the language of OSD menu LANGUAGE :
LANGUAGE :
(ENGLISH, FRANCE, DUTCH, ITALIANO, ESPANO, DEUTCH, SVENSKA, SUOMI, DANSK, PORTUGUES) TV :TV :
- CHANNEL SEARCHING :
Selects the country Auto searches TV channels from CH 1 to CH 125 (cable)
- CH MODIFY : User can edit the TV channels
- CH FINE TUNE : User can tune the TV screen in manual tuning
- TV SELECT : Selects the TV source (Antenna or Cable) Selects input signal INPUT :
INPUT :
- RGB : PC signal select
- SVHS : SUPER VIDEO signal select
- COMPOSITE VIDEO : Composite signal select
- TV : TV signal select LCD MONITOR USER'S MANUAL LCD MONITOR USER'S MANUAL
. APPENDIX Mode Mode Resolution DOS MODE 640400 (NEC) VGA SVGA XGA SXGA 640400 720400 640480 640480 640480 800600 800600 800600 1024768 1024768 1024768 12801024 12801024 Horizontal Frequency (KHz) 24.8 31.5 31.5 31.5 37.9 37.5 37.9 48.1 46.9 48.4 56.5 60.0 64.0 80.0 Vertical Frequency (Hz) 56.4 70 70 60 72 75 60 72 75 60 70 75 60 75
. APPENDIX Specification FUNCTION Type Display Area Display Color Pixel Pitch 15 17 18.1 15.0XGA TFT LCD 17SXGA TFT LCD 18.1SXGA TFT LCD 304.128228.096mm 337.920270.336mm 359.040287.232mm 16,777,216 0.2970.297mm 0.2640.264mm 0.28050.2805mm Max. Resolution 1024768 12801024 LCD Panel Interface LVDS Viewing Angle Contrast Radio Brightness Lef t / Righ t : -60/ 60 Up / Down : -45/ 45 400 : 1 Left / Right : -80 / 80 Up / Down : -80 / 80 450 : 1 250cd/
350 : 1 Horizontal Frequency Vertical Frequency 31 - 61 KHz 60 - 75Hz 30 - 80 KHz 56 - 75Hz 60 - 75Hz Input /
Output Video Input Audio Input Area Antenna Input Analog RGB(Sync : H/V Separate), Video, S-Video Analog RGB(Sync : H/V Separate), Video, S-Video, TV VIDEO : AUDIO L/R PC : STEREO, VIDEO : AUDIO L/R KOREA, USA, OTHER 75 ohm Coaxial Cable TV Signal Tuning System Programmble Frequency Synthexizer Color System Sound System Regulation Safety EMI Tilting Degree Swivel Angle Power Speaker Output Others Plug & Piay NTSC / PAL / SECAM M, B/G, D/K, I FCC, CE, UL FCC, CE, GOST UL, FCC, CE, GOST MIC, CE, VCCI Up / Down : 90/-5 Up / Down : 90/-5 Up / Down : 30/-5 Non support Non support Up / Down : 15/15 Stand -by : 3W / Operation : 40W Stand -by : 5W / Operation : 50W 2 Ways Stereo / 3W3W DDC 1/2B Weight NET 5.5Kg / Gross 6Kg NET 6.1Kg / Gross 7.4Kg NET 9.4Kg / Gross 12Kg Power Supply DC 12V, 3.33A, 50/60Hz DC 12V, 5.0A, 50/60Hz Dimension (mm) 364(H)340(W)199(D) 420(H)410(W)23(D) 448(H)475(W)197(D) 364(H)340(W)5.9(D)-Wall mount 364(H)340(W)5.9(D)-Wall mount Specification can be changed without prior notice. F C C N O T I C E