1 DATECS User Manual INFINEA X 1 DATECS InfineaX
`
User manual THE INFORMATION IN THIS DOCUMENT CANNOT BE REPRODUCED IN ANY MECHANICAL, ELECTRICAL OR ELECTRONIC WAY AND UNDER ANY CIRCUMSTANCES WITHOUT THE WRITTEN CONSENT FROM DATECS LTD. 2 VERSION: March 2016 1 DATECS InfineaX
`
Legal Notice User manual Made for iPod and Made for iPhone mean that an electronic accesory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible fort he operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accesory with iPod, or iPhone may affect wireless performance. Compatibility Made for iPhone 5 iPhone 5S iPhone SE iPod touch (5th generation) iPod touch (6th generation) iPhone, iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Lightning is a trademark of Apple Inc. 3 including User manual interference received, 1 DATECS InfineaX
`
FCC Notice FCC ID: YRWDATECSBTIX This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation. No changes shall be made to the equipment without the manufacturers permission as this may void the users authority to operate the equipment. Exposure to Radio Frequency (RF) Signals The Infinea X, incorporating the iPhone 5/iPod Touch, has been tested and meets applicable limits for radio frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. The SAR limit is 1.6 watts per kilogram averaged over 1 gram of tissue. During testing, the iPhone 5/iPod Touch devices, incorporated within the Infinea X, are set to their highest transmission levels and placed in positions that simulate use against the head, with no separation, and near the body, with 5mm separation. When using the incorporated iPhone 5/iPod Touch functionality, to reduce exposure to RF energy, use a hands-free option, such as the built-in speakerphone, the supplied headphones or other similar accessories. Carry the Infinea X at least 5mm away from your body to ensure exposure levels remain at or below the as-tested levels. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner that has not been tested or certified. The Infinea X complies with the FCC safety requirements for RF exposure in accordance with FCC rule part 2.1093 and KDB447498 D01 for portable use conditions. The Infinea X, incorporating the iPhone 5/iPod Touch, must not be co-located or operated in conjunction with any other antenna nor transmitter. 4 User manual 1 DATECS InfineaX
`
CONTENTS Legal Notice............................................................................................................................................. 3 Compatibility ............................................................................................................................................ 3 1. Technical specification ........................................................................................................................ 6 2. Box Contents ....................................................................................................................................... 7 3. General View ....................................................................................................................................... 8 4. Operation Modes ............................................................................................................................... 11 4.1 Attaching device ......................................................................................................................... 11 4.2 Running device........................................................................................................................... 11 4.3 Battery charging and status level ............................................................................................... 11 4.4 Scanning barcodes..................................................................................................................... 12 4.5 Bluetooth connecting to iOS device for transferring audio......................................................... 12 4.6 Clearing Bluetooth pairing info ................................................................................................... 13 4.7 Switching between Rear and Front Speakers............................................................................ 13 4.8 Automatic charge ....................................................................................................................... 13 4.9 Vibration on scan........................................................................................................................ 13 4.10 Pass-through sync through mini USB ...................................................................................... 13 4.11 Reset the InfineaX.................................................................................................................... 13 4.12 Scanning barcodes................................................................................................................... 13 4.13 RF card reading........................................................................................................................ 14 5 1 DATECS InfineaX
`
1. Technical specification Processor 32-bit ARMTM CortexTM - M3 based Microcontroller User manual ISO/IEC 14443 Type-A/MIFARE:
- MIFARE MINI
- MIFARE CLASSIC-1K, MIFARE CLASSIC-4K
- MIFARE ULTRALIGHT, ULTRALIGHT-C
- MIFARE PLUS 2K/4K
- MIFARE DESFire
- and others ISO/IEC 14443 Type-B:
- supports most of the cards ISO/IEC 15693:
- supports most of the cards Intermec EA-30* - Image Sensor 752 x 480 CMOS, High Performance 2D Imager Scan Engine Intermec EA-31 - Image Sensor 752 x 480 CMOS, High Performance 2D Imager Scan Engine 2D* Imager Supported Symbologies:
EAN/UPC, GS1 Databar (limited expanded & omni-directional), RSS, Code 39, Code 128, UCC/EAN 128, ISBN, ISBT, Interleaved/Matrix/Industrial and Standard 2 of 5, Codabar, Code 93/93i,Code 11, MSI, Plessey, Telepen, Postal codes: Australian Post, BPO, Canada Post, Dutch Post, Japan Post, PostNet, Sweden Post Data Matrix, PDF417, Micro PDF 417, Codablock, Maxicode, QR, Aztec, GS1 composite codes, Direct Part Marking Reading multicodes Rechargeable hard pack Li-Ion Battery 3.7V / 1900 mAh Rechargeable hard pack Li-Ion Battery 3.7V / 3800 mAh (option) Apple 9 pin connector Pass-through sync through special 4 pin waterproof connector Pass-through sync through mini USB Bluetooth for audio signals transfer between InfineaX and iOS device Contactless Card Reader
(option) Barcode Reader
(option) Supported Barcode Types Battery Connectivity Device compatibility Apple iPod 5 / iPod 6 / iPhone 5 / iPhone 5S / iPhone SE Buttons Scan button Battery status button LED indication 18 LEDs for battery and emergency status Audio indication Electro-Magnetic Buzzer Vibration capabilities Micro Vibration Motor - Rated speed: 14,000 2,000rpm Sound capabilities 1.7-W mono fully differential audio power amplifier Front Speaker 150mW Rear Speaker 750mW Electret Condenser Microphone Certifications CE, Apple MFi 6 1 DATECS InfineaX
`
User manual Weight, g 200 with battery and 2D barcode reader (without iPod/iPhone) Dimensions (LxWxH), mm 148 x 72 x 31 Environmental Operating: -10oC to +40oC / 5% to 90% RH Storage: -20oC to +50oC / 5% to 90% RH Drop Test 1.5 m, 6 faces + 4 edges on concrete Power Supply 5V through special 4 pin waterproof connector Accessories Single station charger - SC-1 5V through single or 5 station charger 5 stations charger - GC-5
* Specifications subject to change without notice. 2. Box Contents Item Part Number Descriptions Image 1 2 3 4 InfineaX USB A to mini B(0.9m) InfineaX User Manual IX-BP InfineaX Scanner USB sync cable User's manual Li-Polymer Battery 3,7V 7 1 DATECS InfineaX
`
3. General View Mounting torx screws (1)
(2) Home button
(3) User manual Front Speaker
(4)
(5)
(6) Microphone 8 1 DATECS InfineaX
`
User manual Rear Speaker RF reader Battery Pads for charging station and sync Scan engine On/Off button 9 1 DATECS InfineaX
`
User manual Volume buttons LEDs indications Battery status button LEDs indications mini USB connector Button for switching between Rear/Front speakers Scan button 10 User manual 1 DATECS InfineaX
`
4. Operation Modes 4.1 Attaching device Remove all 6 mounting screws, slide device to 9-pin lightning connector. After that all 6 screws must be mounting again. 4.2 Running device Important - Before first use, battery must be connect to the device. Press one of these buttons; Scan, Status or Speaker Switch. Run app LibraryDemo, and device is ready for using (Pic.7). Pic. 7 4.3 Battery charging and status level This device can be charge from USB port or Datecs charging station. Connect mini USB cable to USB port and charge will start. When the device is charging one green LED is light (Pic.8). Pic. 8 11 User manual 1 DATECS InfineaX
`
Battery level status can be check, when is press battery status button:
- Battery percentage above 75% LEDs flash on green
- Battery percentage between 50-75% LEDs blinks on green
- Battery percentage between 25-50% LEDs blinks on orange
- Battery percentage between 10-25% LEDs blinks on red
- Battery percentage under 10% One red LED is blinks On the LibraryDemo, press battery indicator or battery level button (Pic.9):
Pic. 9 4.4 Scanning barcodes Turn scan engine to barcode and press Scan barcode or scan button. 4.5 Bluetooth connecting to iOS device for transferring audio
- For connecting InfineaX Bluetooth to iOS device, open setting and select Bluetooth, then on available Bluetooth device will shown InfineaX. Select that Bluetooth device. Pic. 10 and 11 12 1 DATECS InfineaX
`
4.6 Clearing Bluetooth pairing info
- Hold on same time status and rear speaker button until the device is beep twice, if after that the devices is still not showing on iOS device available for connecting press on same battery status and scan button for ~5sec.
*Note: If after Bluetooth paring info clearing, InfineaX is not visible, perform with Reset InfineaX (4.11) User manual 4.7 Switching between Rear and Front Speakers.
- For changing active speaker, press speaker switching button. When the rear speaker is active, blue led is light. 4.8 Automatic charge
- When the battery level is above 3,9V InfineaX is automatically start to charge iPhone5 or iPod5. (If the option is enabled in settings) 4.9 Vibration on scan
- This function can be enabled or disabled 4.10 Pass-through sync through mini USB
- This function can be enabled or disabled 4.11 Reset the InfineaX
- Holding on same time status and scan button for ~5sec 4.12 Scanning barcodes The InfineaX uses a scan engine that supports one-dimensional (1D) and two-dimensional
(2D) barcode symbols. The effective reading distance of the barcode reader varies depending on the barcode size. Scanning Barcodes:
red aiming laser near the center of the barcode and the illumination box is over the outer edges of the barcode. Slowly pull back the unit increasing the distance between the barcode and scan head until the barcode has been read by the scanner. To scan a barcode fist activate the scanner. Then position the scan head to center the 13 User manual 1 DATECS InfineaX
`
4.13 RF card reading Start the app and select tab RF. Place the card on the spot with RF symbol (back side on barcode cover). 14