WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6974843.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case User Guide:
Datto DSE641T & DSE641TL Version 1.0 April 27, 2023 1 Table of Contents 1. Model Differences.. 2. General Warnings ........................................................................... 3 3. Product Specifications .................................................................... 4 4. Product Overview ......................................................................... 5 5. Accessories ...................................................................... 5 5.1 Included Accessories 5.2 Accessories available for Purchase 6. Mounting and Installation Instructions .................................................. 7 6.1 How to Assemble the I/O Port Cover and Gasket for IP54 ................................ 7 6.2 How to Assemble the I/O Edge Cover ................................................................... 9 6.3 How to Mount to an Ethernet Junction Box ......................................................... 10 6.4 How to Mount to a Flat Surface (Wall or Ceiling) ............................................... 11 6.5 How to Mount to a Pole ........................................................................................... 12 6.6 How to Mount to T-Rails ......................................................................................... 13 7. Creating a Network on Network Manager ............................................. 14 8. Configuring a network ..................................................................... 22 9. Monitoring, Management and Troubleshooting ........................................ 28 10. Additional Resources ....................................................................... 30 11. Appendix A: FCC Statement .............................................................. 30 12. Appendix B: IC Statement. .............................................................. 32 13. Appendix C: Declaration of Conformity ................................................ 34 14. Appendix D: CE Statements .............................................................. 35 2 1. Model Differences DSE641T Does not contain LTE Module DSE641TL Does Contain LTE Module LTE Module in use: Alpha EM060K-GL-ALPHA Brand: ALPHA Model: EM060K-GL-ALPHA FCC ID: RRKEM060KALPHA 2. General Warnings:
For Indoor Use Only. Pour une utilisation en intrieur uniquement Electrical Hazard: Only qualified, instructed, or skilled personnel should perform installation, repair, or disassembly procedures Risque lectrique : Seul le personnel qualifi, instruit ou qualifi doit effectuer les procdures d'installation, de rparation ou de dmontage Restriction Statement:
The 5150-5350-MHz band is allocated for indoor use only in EU member countries and Canada. 3. Product Specifications BE BG CZ DK DE EE IE EL ES FR HR IT CY LV LT LU HU MT NL AT PL PT RO SI SK FI SE UK WiFi OFDMA Data Rate (Aggregate) 1774.5 Mbps (2.4GHz: 573.5 Mbps, 5GHz: 1201 Mbps) WiFi OFDM Data Rate (Aggregate) 1166.7 Mbps (2.4GHz: 300Mbps, 5GHz: 866.7 Mbps) 3 WiFi Transfer Rate WiFi Radio WiFi Supported Frequency Range
(Will Vary by Region) WiFi Antenna LTE Module UE Categoy LTE Supported Bands 802.11b: Up to 11 Mbps 802.11a/g: Up to 54 Mbps 802.11n: Up to 300 Mbps 802.11ac: Up to 866.7 Mbps 802.11ax: Up to 1201 Mbps 2.4 GHz: 2 stream, 802.11 b/g/n/ax 5 GHz: 2 stream, 802.11 a/b/g/n/ac/ax 2.400 ~ 2.4835 GHz 5.18 ~ 5.24 GHz (UNII-1) 5.26 ~ 5.32 GHz (UNII-2a) 5.50 ~ 5.58 GHz (UNII-2c) 5.66 ~ 5.72 GHz (UNII-2c) 5.745 ~ 5.825 GHz(UNII-3) 2x External Dual band Antenna Cat.6 B1,B2,B3,B4,B5,B7,B8,B12,B13,B17,B20, B28,B41,B66,B71 Band I, Band II, Band IV, Band V, Band VIII 2x External Dipole Antennas 3G Supported Bands LTE Antenna OFDMA Max Users (Recommended) 200 -250 Users per AP OFDM Max Users (Recommended) WIFI Standard Processor Memory Ethernet Ports PoE DC Power Input USB Operating Temperature Installation Environment LEDs 75-150 Users per AP WiFi6 802.11a/b/g/n/ac/ax Quad Core CPU @ 1.8GHz 3GB DDR4 5x 10/100/1000 Mbps RJ45 Ethernet Ports 2x 802.3AF/AT Standard PoE-PSE Output 54V, 2.22A DC Power input 2x USB 2.0 0C ~ 40C Indoor 3x Tri-Color LED Status Indicators Bi-Color ethernet Link/activity LEDs Amber PoE status Indicators Yes 8.66 x 6.06 x 1.6 (220mm x 154mm x 40.5mm) Desktop, Rackmount, Solid Wall(Kit sold separately) Hardware CPU Watchdog Size Mounting Warranty Certifications SSIDs SSID to VLAN Tagging Bridge to LAN Seamless Roaming Cloud Management Free iOS/Android App Zero Config Plug and Play Self-forming, Self-healing Mesh Captive Portal w/ Bandwidth throttling, splashpages, and user controls Lifetime FCC, IC, CE, RCM, UL 4 Yes Yes Yes Yes Yes Yes Yes Yes 4 4. Product Overview 5 5. Accessories 5.1 Included Accessories 6 6. Mounting and Installation Instructions This Appliance is designed to be installed in several mounting positions. Regardless of how you mount this appliance, keep the following in mind:
- Caution
Ensure that Protective earth grounding is available for the device:
o Power Supply Cord shall be connected to a socket-outlet with earthing connection o Using the factory supplied Grounding screw, mount an appropriately sized grounding wire from that grounding point on the chassis to a good earth ground. Place in the center of the room and away from any metallic surfaces Signal primarily radiated to the front and sides, there is limited signal coverage directly behind it
- Do not place heavy objects on the Appliance
Install in an area that is free from strong electromagnetic sources Step 1, Connect WiFi and LTE antennas 7 Step 2, Plug in Ethernet cable from the ISP into Ethernet WAN port 0 Step 3, Plug in the 54V DC Power supply 8 6.1 How to Mount Device on Desktop 6.2 How to Assemble Unit for RackMounting Using Rack Ears 6.2.1 Rack Orientation 1 (Ethernet Ports In the Rear) 9 10 6.2.2 Rack Orientation 2 (Ethernet Ports in the Front) 11 7. Creating a Network on Network Manager Overview: what were doing This guide is intended to help you set up your first cloud-managed wireless mesh network with Datto Network Manager. Network Manager is a cloud-based network controller that makes it easy for anyone to build, manage, and monitor wireless networks from anywhere in the world. This guide will assist you in setting up a new network on the Datto Network Manager web application. For easier, faster setup, use the Datto Networking for iOS or Datto Networking apps. No matter which version you start with, you can switch between the web and mobile apps seamlessly. Heres whats about to happen:
Log into your Datto Partner Portal 1. 2. Well create a new network on Network Manager. 3. Well add access points to the network. 4. Well physically install the access points. 12 5. Well do some basic network configuration. This guide is not intended to cover every aspect of Network Manager. To learn more about planning your network, view the Datto Knowledge Base (kb.datto.com) What youll need To set up your network, youll need the following:
1. One or more Datto Network Manager-compatible wireless devices, such as the DSE641T
& DSE641TL, AP840 or AP840E 2. An Internet connection with at least one Ethernet port available on your modem or router 3. one Ethernet cable and a 802.3at POE source 4. A computer with a browser pointed to datto.com, or an iOS or Android device running the Datto Network Manager App Terminology Well make this process as easy and nontechnical as possible. Here are a few key words that will help. Network: A group of computers or devices that can talk to each other (in our case, wirelessly). Gateway: A Network Manager-compatible router that is connected to the Internet (usually through a DSL, cable, or LAN connection). Repeater: A Network Manager-compatible router that is not connected to the Internet that repeats the signals from local computers and other access points to the gateway. Access point: A generic name for an Network Manager-compatible router/access point which can be either a Gateway or a Repeater. You may also see these called "Nodes."
13 All Datto Networking Access Points configure themselves: they become gateways or repeaters depending on if they are connected to the Internet or not. Step 1: Log into the Datto Partner Portal(datto.com) and Navigate to the Network Status Page Then Select to Add Device, as shown in the Diagram below in the top right corner of the screen 14 You will now be automatically redirected to the Datto Networking Manager webpage, as seen below:
Now you may create new network to add this device to, or navigate to the network you would like to add this device to. For this guide we will be setting up a new Network. So click "Create Network"
Step 2: Create a new network Youll automatically be taken to a page, similar to the one below, to create your first network. 15 Fill in the following information:
Network name: This is the name you want to give this specific network. You will use this name to make changes to the network, display reports, etc. Password: This is the password for local administrators and should be different from your master account login. This limits access and prevents users from making changes to your network. 16 Email: Enter your email address or the address of a local administrator to contact. We will never share this with others. Network Location: Enter a street address for the first access point. To add access points, you will be shown a map that you click on to place access points. By entering an address here, you will be centered on the correct location for your network. Email for Notifications: Enter the email addresses, separated by spaces, for all people youd like to receive outage notifications. These are sent hourly. When finished, click Create to save your new network settings. Step 3: Add access points to your network Its time to let Network Manager know which access points you want to include in the network. Adding them to Network Manager will allow you to manage and monitor the access points from anywhere. Navigate to the Manage > Access Points screen. There are three options to add access points to your network: click the "Add New" button to add access points one at a time by clicking on a map, or use the down arrow to the right of that to add access points in bulk. If you add access points the default way, youll be taken to the Map tab of the Access Points page. A Google map, centered on the address you entered when you created the network, will show a popup 17 to enter your first access point. You can often (depending on location) click the Satellite view button and zoom in for a closer look. 1 Fill in the following information:
Name: Enter a name for this access point. This name is used to reference its location and will be displayed in reports. It does not affect users. MAC address: A MAC address is a sequence of 12 numbers and the letters A-F often separated by colons (Eg: 00:02:6F:8A:B2:6E). This can be found on a label on the bottom of the router and on the side of the product box. Description: You can enter optional descriptive text that will be shown on the reports. This is typically used to keep notes on where the access point is installed, etc. Click Add and repeat the process for each additional access point. If you need to add a large number of access points, you may want to add them in bulk. You can do so two ways: by entering the MAC addresses in a text field (one per line), or by uploading a list of access points
(along with optional name, location, channel overrides, etc.) in a CSV file. 18 1 For both of these options, your access points will be added to the map based on your network location
(similar to how the Datto Networking iOS and Android apps add access points). You can reposition these access points on the map after adding them. When adding by CSV, the CSV file must be in a specific format. You can download a sample CSV file here. Step 4: Install the access points Once your access points are added to Network Manager, its time to install them. If you're using an enclosure, video installation guides are available here. First, connect your Gateway unit to the Internet with an Ethernet cable. This can be plugged in directly to your high-speed modem (if it has a single Ethernet port, power cycle it first), or it can be fed from a router or switch. If it can get an Internet connection through the cable, itll connect to Datto Network Manager. Once the Ethernet cable is plugged in, connect power. The Ethernet cable (PoE device) must be connected only to PoE networks that is SELV circuit and without routing to the outside plant. Next, plug in additional access points as either gateways (connected to Ethernet) or repeaters, connected only to power. When mounting Datto access points directly onto a wall, use a minimum 30 mm screw length. To ensure strong, consistent signal coverage, follow these guidelines:
19 1. Place your gateway in the center of the network. For most devices, every time data is transmitted over one repeater hop, it loses half its speed. A central gateway minimizes the number of hops required. 2. Never go through more than three to four walls or floors. 3. Never go more than 50-150 feet (depending on building materials) between access points. 4. Install no more than about five repeaters to every one gateway. Once all access points are plugged in, you should see them turn green on the Network Manager Status page in about 5 to 15 minutes. For more detailed information on planning and optimizing your network, see the Network Planning Guide. 8. Configuring A Network Your network should now be up and running, but theres a lot we can do to customize it to meet your specific needs. Well walk you through the most common settings here. Configure > General Settings The General Settings tab controls network-wide settings. This will be partially filled in with the information you used to create the network. Location: This defaults to the first address you entered when setting up the network. You can change it at any time. Note that the location only determines where your access point appears on the map; radio settings will be based on the IP address of the access point. Network name: The login name for this network on the dashboard, and also the login ID to access this network individually by a site administrator. This is NOT your master login. This allows you to give access to only the network settings for that network without allowing access to your master account. Time Zone: Used in displaying the local time on reports. AM/PM time: Used in displaying the local time on reports. Display Name: Used to display a more descriptive name (other than the login ID) on reports. Password: The administrator password for this network. Again, this is only for this network and is not your master login password. It is also not the password your users will use to connect to the network. 20 Disable Limited View: If unchecked, users will be able to see a limited view of the network status. The password will still be required to change any network settings. Email: Your email in case we need to contact you. We will not share this with others. Notification Email: The email address notifications will be sent to if enabled. You can list multiple email addresses, separated by spaces. Email Alerts: Select this box to send notifications of network outages each hour to the email addresses you entered above. Network notes: Enter any unique notes for this installation youd like to be able to refer to later. Configure > SSID 1, 2, 3... Each device can broadcast four unique SSIDs that users can connect to. Each of these SSIDs are controlled independently in Network Manager. Typically users have a mix of public SSIDs - with splash pages, bandwidth throttling, DNS filtering and client isolation - and private SSIDs, with WPA Enterprise authentication and access to LAN resources and other clients. When we created your network, we set the first SSID to be public and the second SSID to be private, but you can adjust these any way you wish. Well go through most of the features you may want to enable or change. You can also learn more about voucher access, pay networks and more by following the links at the end of this document. Common Settings SSID name: The name youd like users to see and connect to with their device. You can also check the box below to use each access points name for its SSID instead. Enable: When selected, this SSID will broadcast on all access points in this network. When deselected, it won't broadcast but your settings will be saved. Visible: When enabled, this SSID will advertise itself publicly so users can select it from their list of available networks. When disabled, users must enter the SSID name manually. Band Use this to limit what bands the SSID is broadcast on. Note: Selecting the 'only'
options in a network with single radio devices (like the OM2P) may cause the SSID to not be broadcast at all. Authentication: Enable this to authenticate users with WPA-PSK or WPA-Enterprise at the time they connect to the SSID. This isn't required if you wish to authenticate users on a splash page. WPA Pre-shared key (Password): If you would like to secure your network with a password, enter it here. It must be eight characters or longer and contain no spaces. 21 WPA Enterprise: Uses 802.1x authentication that requires a unique username and password for each user. Captive Portal Settings Bandwidth Throttling: Enable and set download/upload limits to set the maximum speeds users will get when connected to your network. You may want to set these to between 10 and 25 per cent of the speed of your Internet connection, ensuring that one or two users cant consume the entire available bandwidth. Splash Page/Splash Page Type: Enable or disable a page users will see before connecting to your network. You can set this to Custom (hosted by Datto), Facebook WiFi, or a hosted remotely version for advanced users. Splash Page Authentication: Choose Network Manager, RADIUS or HTTP Authentication. Read more here. Client Force Timeout: Minutes client is idle (Idle Timeout) before showing splash page, or minutes between showing splash page regardless of activity (Force Timeout) for non-voucher access. 1 day=1440. Require voucher: Require a valid voucher on splash pages. If unchecked, allows you to provide a basic tier of service at the rates and durations above and (optionally) faster service using vouchers or PayPal. Redirect URL: The page to display after the splash page. Leave blank to display the users requested page. Include user data in redirect URL: If set, additional information specific to the request is added as URL parameters when the final redirect occurs. The parameters node mac, client_mac, and client_url will be set to the MAC addresses of the Access Point and Client, and the original request URL, respectively. Block Unauthenticated Users: Block all ports until a client device has been authenticated. If unchecked, only browsing is blocked. When selected, unauthenticated users trying to access https websites will not be redirected to the splash page. White List: MAC addresses, one per line that will NOT see the splash page, if enabled. Useful for game consoles that do not have a browser. Walled Garden: Sites and resources (images and files for the splash page, etc.) users can visit prior to authentication. Blocked Devices MAC addresses that are blocked from this network. Blocked Message Message to display on the splash page to users who are blocked 22 Availability Schedule WiFi A WiFi schedule allows you to enable or disable each SSID for specific times of the day. The SSID will be enabled or disabled upon checkin to Datto Network Manager, typically within five minutes of the times specified. This schedule will control the SSID only if Enabled for the SSID. Advanced Settings Band Steering Attempts to connect clients to the 5Ghz band when possible in order to best utilize available bandwidth. Band Steering is only available when "Band" is set to
"Both - Combined SSID. 802.11r Fast BSS transition (FT), attempts to reduce handoff delay in situations where an end device is roaming from one AP to another. This is useful in applications such as VoIP calls that must maintain continuity of connection. This option is only available if the SSID has WPA authentication enabled. Block LAN Access: Prevents users on this wireless network from accessing your wired LAN. Client isolation: Prevents your wireless users from being able to access each other's computers and common for public networks. Unchecking this box will allow you to do things like share a printer attached to the network, but will also allow malicious users access to other users on the network. Uncheck this ONLY if you know all users have a firewall enabled on their computers. DNS Intercept this must be enabled for Alternate DNS, Blocked Devices, Blocked Message and Splash Page functionality to work SMTP Redirect: Alternate SMTP server IP address for your network. This allows users to send SMTP email by using your ISP's SMTP server. Alternate DNS: Alternate DNS server IP addresses, one per line, for this SSID. This setting will override your network-wide Alternate DNS settings on this SSID. This allows you to use services such as OpenDNS for content filtering, client tracking and more. Access Control List: MAC addresses allowed to use this Access Point, one per line. All other users (MAC addresses) will not be able to browse on this access point. Leave blank to allow all MAC addresses (recommended). Bridge to LAN: Each SSID can be bridged to the LAN for access to local LAN resources. Bridge to VLAN: Each SSID can be tagged with a number from 2-4094 so you can control traffic flow within your LAN. Using a VLAN automatically bridges the SSID to the LAN. 23 PayPal Item ID: You can require guests to pay for all service or enhanced service through PayPal. See the guides at the end of this document. Configure > Radio The Radio settings controls network-wide access point settings. The main items you'll want to set are Channels and Internet Check. Channels: Auto Channel will let Network Manager optimize channel settings daily for your network, taking into consideration mesh repeaters, nearby access points, and sources of interference. Auto Channel respects the Maintenance Window setting in Configure > Maintenance to avoid disruptions during critical times. If Auto is selected then the ability to specify channels, on either a per-network or per-access point basis, is disabled. Manual lets you specify a single channel per band to use for all access points. You can override individual access points in Manage > Access Points. Internet Check: When selected, the wireless network will only be available when there is an active Internet connection. This allows access points to recover quickly when they lose a connection and is the recommended setting. When deselected, the wireless network will stay up even when there is no Internet connection. This allows local resources such as printers and shared drives to continue to function, but access points may take longer to recover when they lose a connection. Configure > Maintenance Automatic Upgrades: When enabled, your network will automatically upgrade to the latest firmware version as new stable upgrades become available. Maintenance window: Select the period of time each day when Network Manager can perform maintenance on your network. This maintenance includes firmware upgrades and Auto Channel scanning and configuration. Configure > Display The Display section allows you to customize the look and feel of Network Manager, and enable external embeds. Display Name: Used to display a more descriptive name on reports. When none is entered, the network name will be used. Update Logo: Load your own logo to replace the Network Manager logo in the top left corner of the application. Allow Read-Only: Click to enable the password-free read-only view of the network status. When enabled, read-only view can be accessed by entering just the network name in Network Manager without a password. The password will still be required to change any network settings. 24 Enable 12 Hour Display: Check to display time in 12 hour (am/pm) format. External embeds: Use the HTML snippet to embed Network Manager reporting pages on an external site like a client portal. Configure > Advanced The Advanced Settings page has a variety of settings that most users won't change. This section will touch on the more common settings. AP Mesh When disabled, this turns off meshing on your APs. Mesh Encryption must be enabled. Mesh Encryption: Encrypts all mesh traffic with WPA2 protection. Access points not belonging to this network won't be able to join the mesh due to the encryption. Alternate DNS: Alternate DNS server IP address for your network, such as OpenDNS. OpenDNS provides several additional features such as content filtering that you may find helpful. This setting applies to all SSIDs and can be overridden by setting an Alternate DNS for each individual SSID. Presence Reporting Settings to configure exporting presence data about wireless clients. Commonly used for location analytics. Note that this feature will be part of a paid package of services in the future. Learn more Status LED(s) When disabled, this turns off LED lights on your APs Share Vouchers: When enabled, vouchers created on this network will be usable on all other networks under this account. Bridge wired clients: When a wired client is connected to an access point, it will use settings from this SSID. Application Reporting (DPI) Disabling this will cause application data (pie chart and table) in the clients page to not be displayed and application data in the networks overview page to display all traffic as unclassified. IGMP Proxy When enabled multicast traffic will be allowed over the LAN. When disabled multicast traffic will be blocked from entering the LAN Roaming VLANs Provides seamless roaming to all SSIDs that aren't bridged to the LAN. Requires that your Switch already be configured to utilize our VLANs. To learn more about setting this feature up, click here. Not compatible with Client Isolation. Bridge SSID: Select an SSID to bridge to the LAN. This gives clients access to LAN resources such as file servers and printers, disables NAT and lets your LAN assign all client DHCP addresses. You can bridge additional SSIDs by using a VLAN tag on each SSID settings page. Delete Network: Select to delete this network from Network Manager. 25 9. Monitoring, Management, and Troubleshooting With your network running and customized, you can now monitor its usage and status by selecting the Network Status link. Heres an overview of the tools available:
Network Usage graph at the top of the page shows the number of users on SSID#1 and the amount of upload and download traffic. Node Map shows the nodes relationship to each other on a map. Node List gives details on each individual node. Node Outages Chart shows the check-in status of a node using colors. STATE Cloud check-in succeeded COLOR Solid Teal IP acquired via DHCP, but inet test is failing Flash Purple Users List shows all users connected to the network. Network Diagram shows how all nodes relate to each other. STATE Checkin performed, mesh speed <= 2Mbps Orphan mode Lonely mode COLOR Flash Green Flash (Yellow), then Green Flash (Red), then Green checkin performed, mesh speed >2Mbps Solid Green You can use each of these tools to see how your network is doing and troubleshoot issues. Troubleshooting in Datto Network Manager Have you have created a strong, healthy network? While there are plenty of diagnostic tools available, the following two are most telling:
On the Node Outages Chart: dark/light green indicate a gateway/repeater is online and hasn't missed a check-in, yellow indicates a node has lost contact with the mesh and is in lonely/orphan mode, pink is when a node needs re-pairing (update of network settings), and gray indicates it's down, offline or has missed check-ins. On the Node Map: (click on a node, then select Neighbors) all nodes will have at least one 26
(preferably two) connections with an RSSI of 17 or more. If not, you need to reposition your node closer to the others or in a better line through fewer walls. You may need to add new nodes. On the Node List: the number of Hops should be three or less (fewer is better). If not, you need to add additional gateways or reposition nodes. Troubleshooting with your device with lights The LED on your device can tell you a lot about how that device is functioning. The meaning of the LED light for the DSE641T & DSE641TL is as follows:
Common States (Gateway and Repeater) STATE Boot loader Booting Up Firmware upgrade (node is executing the firmware upgrade) Cloud check-in failure Key re-pair Configuration change AP not ready Net failure - no default route COLOR Solid Purple Solid Yellow Solid Red Flash White Flash Yellow Solid White Flash Red 10. Additional Resources To learn more about planning and optimizing your network, download the Datto Network Planning Guide. To learn more about Datto's splash page feature, download the Using the Splash Page Editor Guide. To learn more about Datto's vouchers feature, download the Using Vouchers in Network Manager Guide. To learn more about integrating vouchers with PayPal, download the Using PayPal in Network Manager Guide. For any information or datasheets please log into the Datto Partner Portal and view the Corresponding KB articles at help.datto.com 11. Appendix A: FCC Statements Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can 27 radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 50 cm
(DSE641T)/49 cm (DSE641TL) between the radiator & your body. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Devices will not permit operations on channels 120-132 for 11a and 11n/a which overlap the 5600 - 5650 MHz band. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. Only Trained and Qualified Professionals should be allowed to install, replace or service this equipment. No User-Serviceable parts inside. To Avoid Risk of electric shock, do not open. Installation of the equipment must comply with local and national electrical codes. 28 FCC Professional Installation Instructions:
1. Installation Personnel This product is designed for a specific application and needs to be installed by a qualified professional who has RF and related rule knowledge. The General User shall not attempt to install or change the settings. 2. Installation Location The product shall be installed at a location where the radiating antenna can be kept 50 cm (DSE641T)/49 cm (DSE641TL) cm away from nearby person in normal operating condition to meet regulatory RF exposure requirements 3. External Antenna Use only the antennas which have been approved by the applicant. The nonapproved antenna(s) may produce unwanted spurious or excessive RF emissions which may lead to the violation of FCC limit and is prohibited. 4. Installation Procedure Please refer to the Users Manual for the installation procedure details 5. Warning Please carefully select the installation position and make sure that the final output power does not exceed the limit set in relevant rules. The violation of the rule could lead to serious federal penalty. 12. Appendix B: IC Statements Canada, Industry Canada (IC) Notices This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 29 Caution :
the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the
(i) potential for harmful interference to co-channel mobile satellite systems;
for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the
(ii) bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the
(iii) band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate;
and where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s)
(iv) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated. Avertissement:
Le guide dutilisation des dispositifs pour rseaux locaux doit inclure des instructions prcises sur les restrictions susmentionnes, notamment :
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
le gain maximal dantenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et
(ii) 5470-5725 MHz doit se conformer la limite de p.i.r.e.
(iii) le gain maximal dantenne permis (pour les dispositifs utilisant la bande 5725-5850 MHz) doit se conformer la limite de p.i.r.e. spcifie pour lexploitation point point et non point point, selon le cas.
(iv) lorsquil y a lieu, les types dantennes (sil y en a plusieurs), les numros de modle de lantenne et les pires angles dinclinaison ncessaires pour rester conforme lexigence de la p.i.r.e. applicable au masque dlvation, nonce la section 6.2.2.3, doivent tre clairement indiqus Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 30 cm
(DSE641T)/31 cm (DSE641TL) between the radiator & your body. 30 Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis plus de 30 cm
(DSE641T)/31 cm (DSE641TL) entre le radiateur et votre corps. This radio transmitter [23500-DNWDSE641T] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Le prsent metteur radio (23500-DNWDSE641T) a t approuv par Innovation, Sciences et Dveloppement conomique Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal d'antenne. Les types d'antennes non inclus dans cette liste qui ont un gain suprieur au gain maximal indiqu pour tout type list sont strictement interdits pour une utilisation avec cet appareil. External antenna list Manufacturer PSA Model RFDPA161500SBLB803 PSA RFDPA161500SBLB803 Antenna Type Dipole
(WIFI 1) Dipole
(WIFI 2) Max Gain (dBi) 4.33 (2.4~2.4835 GHz) 5.02(5.15~5.85 GHz) 5.20 (2.4~2.4835 GHz) 4.95(5.15~5.85 GHz) Impedance () 50 50 Professional installation instruction 1. Installation personal This product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change the setting. 2. Installation location The product shall be installed at a location where the radiating antenna can be kept 30 cm
(DSE641T)/31 cm (DSE641TL) from nearby person in normal operation condition to meet regulatory RF exposure requirement. 31 3. External antenna Use only the antennas which have been approved by the applicant. The non-approved antenna(s) may produce unwanted spurious or excessive RF transmitting power which may lead to the violation of ISED limit and is prohibited. 4. Installation procedure Please refer to users manual for the detail. 5. Warning Please carefully select the installation position and make sure that the final output power does not exceed the limit set force in relevant rules. The violation of the rule could lead to serious federal penalty. Instructions d'installation professionnelle 1. Installation Ce produit est destine a un usage specifique et doit etre installe par un personnel qualifie maitrisant les radiofrequences et les regles s'y rapportant. L'installation et les reglages ne doivent pas etre modifies par l'utilisateur final. 2. Emplacement d'installation En usage normal, afin de respecter les exigences reglementaires concernant l'exposition aux radiofrequences, ce produit doit etre installe de facon a respecter une distance de 30 cm
(DSE641T)/31 cm (DSE641TL) entre l'antenne emettrice et les personnes. 3. Antenn externe. Utiliser uniiquement les antennes approuvees par le fabricant. L'utilisation d'autres antennes peut conduire a un niveau de rayonnement essentiel ou non essentiel depassant les niveaux limites definis par ISED, ce qui est interdit. 4. Procedure d'installation Consulter le manuel d'utilisation. 5. Avertissement Choisir avec soin la position d'installation et s'assurer que la puissance de sortie ne depasse pas les limites en vigueur. La violation de cette regle peut conduire a de serieuses penalites federales. 32 13. Appendix C: Declaration of Conformity Hereby, Datto, Inc, declares that the radio equipment type DSE641T and DSE641TL are in compliance with Directive 2014/53/EU Radio Equipment Regulations 2017 issues by the Commission of the European Community. The full text of the EU declaration of conformity is available at the following internet address:
help.datto.com A minimum Separation distance of 22 cm must be maintained between the user's body and the device, including the antenna during body-worn operation to comply with the RF exposure requirements in Europe. The following Test methods have been applied in order to prove conformity with the essential requirements of the EU Directive 2014/53/EU. Radio:
EN 300 328 EN 301 893 EN 301 908-1 RF Exposure:
EMC:
EN 50385 EN 62311 EN 50665 EN 301 489-1 EN 301 489-17 EN 301 489-52 Emissions:
Safety:
EN 55032 EN 55035 EN 62368-1
33 The frequency and the maximum transmitted power in EU/UK are listed below:
WIFI 2412-2472MHz: 19.91 dBm 5180-5240MHz: 22.94 dBm 5260-5320MHz: 22.85 dBm 5500-5700MHz: 29.93 dBm WWAN WCDMA : 25 dBm LTE Band : 25 dBm The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. AT BE BG HR CY CZ DK EE FI FR DE EL HU IT LV LT LU MT NL IE PL PT RO SK SI ES SE UK(NI) Norway(NO), Iceland(IS), Lichtenstein(LI), Turkey(TR), Switzerland(CH) 34 14. Appendix D: CE Statements Simplified EU Declaration of Conformity:
Cesky[Czech]
Dansk[Danish]
Deutsch[German]
Eesti[Estonian]
English Espaol[Spanish]
[Greek]
Franais [French]
Italiano[Italian]
Datto tmto prohlauje, e tento bezdrtov pstupov bod DSE641T
& DSE641TL je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 2014/53 / EU Datto erklrer hermed, at dette trdlse adgangspunkt DSE641T &
DSE641TL er i overensstemmelse med de vsentlige krav og andre relevante bestemmelser i direktiv 2014/53 / EU Hiermit erklrt Datto, dass dieser drahtlose Zugangspunkt DSE641T
& DSE641TL den grundlegenden Anforderungen und anderen relevanten Bestimmungen der Richtlinie 2014/53 / EU entspricht Kesolevaga deklareerib Datto, et see traadita psupunkt DSE641T
& DSE641TL on - oluliste nuete ja muude asjakohaste stete jrgimine Direktiiv 2014/53 / EU Hereby, Datto, declares that this wireless Access Point DSE641T &
DSE641TL is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU Por la presente, Datto declara que este punto de acceso inalmbrico DSE641T & DSE641TL cumple con los requisitos esenciales y otras disposiciones relevantes de la Directiva 2014/53 / EU.
, Datto, DSE641T & DSE641TL 2014/53 / U Par la prsente, Datto dclare que ce point d'accs sans fil DSE641T & DSE641TL est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53 / EU. Con la presente, Datto, dichiara che questo Access Point wireless DSE641T & DSE641TL conforme ai requisiti essenziali e ad altre disposizioni pertinenti della Direttiva 2014/53 / EU. 35 Latviski[Latvian]
Lietuvi[Lithuanian]
Nederlands[Dutch]
Malti[Maltese]
Magyar[Hungarian]
Polski[Polish]
Portugus[Portuguese]
Slovensko [Slovenian]
Slovensky [Slovak]
Suomi [Finnish]
Svenska [Swedish]
Ar o Datto pazio, ka is bezvadu piekuves punkts DSE641T &
DSE641TL atbilst Direktvas 2014/53 / EU pamatprasbm un citiem attiecgajiem noteikumiem iuo, Datto pareikia, kad is belaidis prieigos takas DSE641T &
DSE641TL atitinka esminius Direktyvos 2014/53 / ES reikalavimus ir kitas susijusias nuostatas Hierbij verklaart Datto dat dit draadloze toegangspunt DSE641T &
DSE641TL in overeenstemming is met de essentile vereisten en andere relevante bepalingen van richtlijn 2014/53 / EU Hawnhekk, Datto, jiddikjara li dan il-Punt ta 'Aess bla fili DSE641T
& DSE641TL huwa konformi mar-rekwiiti essenzjali u dispoizzjonijiet rilevanti ora tad-Direttiva 2014/53 / EU Ezennel a Datto kijelenti, hogy ez az DSE641T & DSE641TL vezetk nlkli hozzfrsi pont megfelel a 2014/53 / EU irnyelv alapvet kvetelmnyeinek s egyb vonatkoz rendelkezseinek Niniejszym Datto owiadcza, e ten bezprzewodowy punkt dostpowy DSE641T & DSE641TL jest zgodny z zasadniczymi wymaganiami i innymi odpowiednimi postanowieniami dyrektywy 2014/53 / EU Por meio deste, Datto declara que este Ponto de Acesso sem fio DSE641T & DSE641TL est em conformidade com os requisitos essenciais e outras disposies relevantes da Diretiva 2014/53 / EU Datto izjavlja, da je ta brezina dostopna toka DSE641T &
DSE641TL v skladu z bistvenimi zahtevami in drugimi ustreznimi dolobami Direktive 2014/53 / EU Tmto spolonos Datto vyhlasuje, e tento bezdrtov prstupov bod DSE641T & DSE641TL je v slade so zkladnmi poiadavkami a almi prslunmi ustanoveniami smernice 2014/53 / E. Tten Datto vakuuttaa, ett tm langaton tukiasema DSE641T &
DSE641TL on direktiivin 2014/53 / EU olennaisten vaatimusten ja muiden asiaankuuluvien snnsten mukainen. frklarar Datto att denna trdlsa tkomstpunkt Hrmed DSE641T & DSE641TL verensstmmer med de vsentliga kraven och andra relevanta bestmmelser i direktiv 2014/53 / EU 36