FCC ID: WT8OMA42 WiFi Access Point

User Guide:

Open Mesh A42 Version 1.1 1 Table of Contents 1. Creating a CloudTrax Network 2. Configuring a CloudTrax network 3. Monitoring, Management and Troubleshooting 4. Additional Resources 5. Product Specifications 6. Appendix A: FCC Statement 7. Appendix B: IC Statement 8. Appendix C: CE Statements

................................................................ ............................................................ ........................................... ......................................................................... ....................................................................... ................................................................. ................................................................... ................................................................. 3 9 14 16 17 18 19 20 2 Creating a CloudTrax network Overview: what were doing This guide is intended to help you set up your first cloud-managed wireless mesh network withCloudTrax. CloudTrax is a free cloud-based network controller that makes it easy for anyone to build, manage, and monitor wireless networks from anywhere in the world. This guide will assist you in setting up a new network on the CloudTrax web application. For easier, faster setup, use theCloudTrax for iOSorCloudTrax for Androidapps. No matter which version you start with, you can switch between the web and mobile apps seamlessly. Heres whats about to happen:

1. Well create a master login on CloudTrax.com that will allow you to build, manage and monitor multiple networks in one place. 2. Well create a new network on CloudTrax. 3. Well add access pointsto the network. 4. Well physically install the access points. 5. Well do some basic network configuration. This guide is not intended to cover every aspect of CloudTrax. To learn more about planning your network, viewtheCloudtrax Network Planning Guide. What youll need To set up your network, youll need the following:

1. One or more CloudTrax-compatible wireless devices, such as the OM2P or MR1750. 2. An Internet connection with at least one Ethernet port available on your modem or router, and one Ethernet cable. 3 3. A computer with a browser pointed towww.cloudtrax.com, or aniOSorAndroiddevice running the CloudTrax app. Terminology Well make this process as easy and nontechnical as possible. Here are a few key words that will help. Network:A group of computers or devices that can talk to each other (in our case, wirelessly). Gateway:A CloudTrax-compatible router that is connected to the Internet (usually through a DSL, cable, or LAN connection). Repeater:A CloudTrax-compatible router that is not connected to the Internet that repeats the signals from local computers and other access points to the gateway. Access point:A generic name for an CloudTrax-compatible router/access point which can be either a Gateway or a Repeater. You may also see these called "Nodes."

All CloudTrax devices configure themselves: they become gateways or repeaters depending on if they are connected to the Internet or not. Step 1: Create a Master Login The first time you use CloudTrax, you need to create a Master Login. This account will be your login for all networks you create. From CloudTrax.com, click the Create account link just below the login fields. Youll see a page similar to the one below. Fill in the following information:

First Name:Well use this to address you in email correspondence. 4 Username:This is your master login you will use to access ALL networks you create. It allows you to login once and edit/view all your networks. It MUST be different from your network name(s) which you will create in a second step. You may want to use your company name here. Email:Youll receive an email at this address asking you to verifythis master login to continue. Password:This is your master administrator password. It can be used with the above login name to access all of your networks. Make this password different from the individual network passwords youll create later. When finished, click Create/Edit to save your account settings. In a few moments, youll receive an email asking you to confirm the account you just created. Just click on the Verify Account link to create your new CloudTrax Master Login. Step 2: Create a new network Youll automatically be taken to a page, similar to the one below, to create your first network. Fill in the following information:

Network name:This is the name you want to give this specific network. You will use this name to make changes to the network, display reports, etc. Password:This is the password for local administrators and should be different from your master account login. This limits access and prevents users from making changes to your network. Email:Enter your email address or the address of a local administrator to contact. We will never share this with others. 5 Network Location:Enter a street address for the first access point. To add access points, you will be shown a map that you click on to place access points. By entering an address here, you will be centered on the correct location for your network. Email for Notications:Enter the email addresses, separated by spaces, for all people youd like to receive outage notifications. These are sent hourly. When finished, click Create to save your new network settings. Step 3: Add access points to your network Its time to let CloudTrax know which access points you want to include in the network. Adding them to CloudTrax will allow you to manage and monitor the access points from anywhere. Navigate to the Manage > Access Points screen. There are three options to add access points to your network: click the "Add New" button to add access points one at a time by clicking on a map, or use the down arrow to the right of that to add access points in bulk. If you add access points the default way, youll be taken to the Map tab of the Access Pointspage. A Google map, centered on the address you entered when you created the network, will show a popup to enter your first access point. You can often (depending on location) click the Satellite view button and zoom in for a closer look. 6 Fill in the following information:

Name:Enter a name for this access point. This name is used to reference its location and will be displayed in reports. It does not affect users. MAC address:A MAC address is a sequence of 12 numbers and the letters A-F often separated by colons (Eg: 00:02:6F:8A:B2:6E). This can be found on a label on the bottom of the router and on the side of the product box. Description:You can enter optional descriptive text that will be shown on the reports. This is typically used to keep notes on where the access point is installed, etc. Click Add and repeat the process for each additional access point. If you need to add a large number of access points, you may want to add them in bulk. You can do so two ways: by entering the MAC addresses in a text field (one per line), or by uploading a list of access points (along with optional name, location, channel overrides, etc.) in a CSV file. 7 For both of these options, your access points will be added to the map based on your network location (similar to how the CloudTrax iOS and Android apps add access points). You can reposition these access points on the map after adding them. When adding by CSV, the CSV file must be in a specific format. You can download asample CSV file here. Step 4: Install the access points Once your access points are added to CloudTrax, its time to install them. If you're using an enclosure, video installation guides are availablehere. First, connect your Gateway unit to the Internet with an Ethernet cable. This can be plugged in directly to your high-speed modem (if it has a single Ethernet port, power cycle it first), or it can be fed from a router or switch. If it can get an Internet connection through the cable, itll connect to CloudTrax. Once the Ethernet cable is plugged in, connect power. The Ethernet cable (PoE device) must be connected only to PoE networks that is SELV circuit and without routing to the outside plant. Next, plug in additional access points as either gateways (connected to Ethernet) or repeaters, connected only to power. When mounting Open Mesh access points directly onto a wall, use a minimum 30 mm screw length. To ensure strong, consistent signal coverage, follow these guidelines:

1. Place your gateway in the center of the network. For most devices, every time data is transmitted over one repeater hop, it loses half its speed. A central gateway minimizes the number of hops required. 2. Never go through more than three to four walls or floors. 3. Never go more than 50-150 feet (depending on building materials) between access points. 4. Install no more than about five repeaters to every one gateway. Once all access points are plugged in, you should see them turn green on the CloudTrax Network Status page in about 5 to 15 minutes. For more detailed information on planning and optimizing your network, see theNetwork Planning Guide. 8 Configuring a CloudTrax Network Your network should now be up and running, but theres a lot we can do to customize it to meet your specific needs. Well walk you through the most common settings here. Configure > General Settings The General Settings tab controls network-wide settings. This will be partially filled in with the information you used to create the network. Location:This defaults to the first address you entered when setting up the network. You can change it at any time. Note that the location only determines where your access point appears on the map; radio settings will be based on the IP address of the access point. Network name:The login name for this network on the dashboard, and also the login ID to access this network individually by a site administrator. This is NOT your master login. This allows you to give access to only the network settings for that network without allowing access to your master account. Time Zone:Used in displaying the local time on reports. AM/PM time:Used in displaying the local time on reports. Display Name:Used to display a more descriptive name (other than the login ID) on reports. Password:The administrator password for this network. Again, this is only for this network and is not your master login password. It is also not the password your users will use to connect to the network. Lobby Password:The Lobby Assistant (lobby.cloudtrax.com) password for this network. Logging in with this password will display the create voucher page. All other edit access will be denied. Disable Limited View:If unchecked, users will be able to see a limited view of the network status. The password will still be required to change any network settings. Email:Your email in case we need to contact you. We will not share this with others. Notication Email:The email address notifications will be sent to if enabled. You can list multiple email addresses, separated by spaces. Email Alerts:Select this box to send notifications of network outages each hour to the email addresses you entered above. Network notes: Enter any unique notes for this installation youd like to be able to refer to later. Configure > SSID1, 2, 3... Each CloudTrax device can broadcast four uniqueSSIDs that users can connect to. Each of these SSIDs are controlled independently in CloudTrax. Typically users have a mix of public SSIDs - with 9 splash pages, bandwidth throttling, DNS filtering and client isolation - and private SSIDs, with WPA Enterprise authentication and access to LAN resources and other clients. When we created your network, we set thefirstSSID to bepublic and the second SSID to be private, but you can adjust these any way you wish. Well go through most of the features you may want to enable or change. You can also learn more about voucher access, pay networks and more by following the links at the end of this document. Common Settings SSIDname:The name youd like users to see and connect to with their device. You can also check the box below to use each access points name for its SSID instead. Enable:When selected, this SSID will broadcast on all access points in this network. When deselected, it won't broadcast but your settings will be saved. Visible:When enabled, this SSID will advertise itself publicly so users can select it from their list of available networks. When disabled, users must enter the SSID name manually. Authentication:Enable this to authenticate users with WPA-PSK or WPA-Enterprise at the time they connect to the SSID. This isn't required if you wish to authenticate users on a splash page. Pre-shared key(Password):If you would like to secure your network with a password, enter it here. It must be eight characters or longer and contain no spaces. WPA Enterprise:Uses 802.1x authentication that requires a unique username and password for each user. Captive Portal Settings Bandwidth Throttling:Enable and set download/upload limits to set the maximum speeds users will get when connected to your network. You may want to set these to between 10 and 25 per cent of the speed of your Internet connection, ensuring that one or two users cant consume the entire available bandwidth. Splash Page/Splash Page Type:Enable or disable a page users will see before connecting to your network. You can set this to Custom (hosted by CloudTrax), Facebook WiFi, or a hosted remotely version for advanced users. Splash Page Authentication:Choose CloudTrax, RADIUS or HTTP Authentication.Read more here. Client Force Timeout:Minutes client is idle (Idle Timeout) before showing splash page, or minutes between showing splash page regardless of activity (Force Timeout) for non-voucher access. 1 day=1440. 10 Require voucher:Require a valid voucher on splash pages. If unchecked, allows you to provide a basic tier of service at the rates and durations above and (optionally) faster service using vouchers or PayPal. Redirect URL:The page to display after the splash page. Leave blank to display the users requested page. Include user data in redirect URL:If set, additional information specific to the request is added as URL parameters when the final redirect occurs. The parameters node mac, client_mac, and client_url will be set to the MAC addresses of the Access Point and Client, and the original request URL, respectively. Block Unauthenticated Users:Block all ports until a client device has been authenticated. If unchecked, only browsing is blocked. When selected, unauthenticated users trying to access https websites will not be redirected to the splash page. White List:MAC addresses, one per line that will NOT see the splash page, if enabled. Useful for game consoles that do not have a browser. Walled Garden:Sites and resources (images and files for the splash page, etc.) users can visit prior to authentication. Advanced Settings Block LAN Access:Prevents users on this wireless network from accessing your wired LAN. Client isolation:Prevents your wireless users from being able to access each other's computers and common for public networks. Unchecking this box will allow you to do things like share a printer attached to the network, but will also allow malicious users access to other users on the network. Uncheck this ONLY if you know all users have a firewall enabled on their computers. SMTP Redirect:Alternate SMTP server IP address for your network. This allows users to send SMTP email by using your ISP's SMTP server. Alternate DNS:Alternate DNS server IP addresses, one per line, for this SSID. This setting will override your network-wide Alternate DNS settings on this SSID. This allows you to use services such as OpenDNS for content filtering, client tracking and more. Access Control List:MAC addresses allowed to use this Access Point, one per line. All other users

(MAC addresses) will not be able to browse on this access point. Leave blank to allow all MAC addresses (recommended). Bridge to VLAN:Each SSID can be tagged with a number from 2-4094 so you can control traffic flow within your LAN. Using a VLAN automatically bridges the SSID to the LAN. 11 PayPal Item ID:You can require guests to pay for all service or enhanced service through PayPal. See the guides at the end of this document. Configure >Radio The Radio settingscontrols network-wide access point settings. The main items you'll want to set are Channels and Internet Check. Channels:Auto Channel will let CloudTrax optimize channel settings dailyfor your network, taking into consideration mesh repeaters, nearby access points, and sources of interference. Auto Channel respects the Maintenance Window setting in Configure > Maintenance to avoid disruptions during critical times. If Auto is selected then the ability to specify channels, on either a per-

network or per-access point basis, is disabled. Manual lets you specify a single channel per band to use for all access points. You can override individual access points in Manage > Access Points. Internet Check:When selected, the wireless network will only be available when there is an active Internet connection. This allows access points to recover quickly when they lose a connection and is the recommended setting. When deselected, the wireless network will stay up even when there is no Internet connection. This allows local resources such as printers and shared drives to continue to function, but access points may take longer to recover when they lose a connection. Configure >Maintenance Automatic Upgrades:When enabled, your network will automatically upgrade to the latest firmware version as new stable upgrades become available. Maintenance window:Select the period of time each day when CloudTrax can perform maintenance on your network. This maintenance includes firmware upgrades and Auto Channel scanning and configuration. Configure >Display The Display section allows you to customize the look and feel of CloudTrax, and enable external embeds. Display Name:Used to display a more descriptive name on reports. When none is entered, the network name will be used. Update Logo:Load your own logo to replace the CloudTrax logo in the top left corner of the application. 12 Allow Read-Only:Click to enable the password-free read-only view of the network status. When enabled, read-only view can be accessed by entering just the network name in CloudTrax without a password. The password will still be required to change any network settings. Enable 12 Hour Display:Check to display time in 12 hour (am/pm) format. External embeds:Use the HTML snippet to embed CloudTrax reporting pageson an external site like a client portal. Configure >Advanced The Advanced Settings page has a variety of settings that most users won't change. This section will touch on the more common settings. Mesh Encryption:Encrypts all mesh traffic with WPA2 protection. Access points not belonging to this network won't be able to join the mesh due to the encryption. Alternate DNS:Alternate DNS server IP address for your network, such as OpenDNS. OpenDNS provides several additional features such as content filtering that you may find helpful. This setting applies to all SSIDs and can be overridden by setting an Alternate DNS for each individual SSID. Share Vouchers:When enabled, vouchers created on this network will be usable on all other networks under this account. Bridge wired clients:When a wired client is connected to an access point, it will use settings from this SSID. Bridge SSID:Select an SSID to bridge to the LAN. This gives clients access to LAN resources such as file servers and printers, disables NAT and lets your LAN assign all client DHCP addresses. You can bridge additional SSIDs by using a VLAN tag on each SSID settings page. Delete Network:Selectto delete this network from CloudTrax. 13 Monitoring, Management and Troubleshooting With your network running and customized, you can now monitor its usage and status by selecting the Network Status link. Heres an overview of the tools available:

Network Usage graphat the top of the page shows the number of users on SSID#1 and the amount of upload and download traffic. Node Mapshows the nodes relationship to each other on a map. Node Listgives details on each individual node. Node Outages Chartshowsthe check-in statusof a node using colors. Users Listshows all users connected to the network. Network Diagramshows how all nodes relate to each other. You can use each of these tools to see how your network is doing and troubleshoot issues. Troubleshooting in CloudTrax Have you have created a strong, healthy network? While there are plenty of diagnostic tools available, the following two are most telling:

On the Node OutagesChart:dark/light green indicate a gateway/repeater is online and hasn't missed a check-in, yellow indicates a node has lost contact with the mesh and is in lonely/orphan mode, pink is when a node needs re-pairing (update of network settings), and gray indicates it's down, offline or has missed check-ins. On the Node Map:(click on a node, then selectNeighbors) all nodes will have at least one

(preferably two) connections with an RSSI of 17 or more. If not, you need to reposition your node closer to the others or in a better line through fewer walls. You may need to add new nodes. On the Node List:the number of Hops should be three or less (fewer is better). If not, you need to add additional gateways or reposition nodes. Troubleshooting with your device with lights The LED on your Cloudtrax-compatible device can tell you a lot about how that device is functioning. The meaning of the LED light for the A Series is as follows:

Common States (Gateway and Repeater) STATE Boot loader COLOR Solid Purple 14 Booting Up Solid Yellow Firmware upgrade (node is executing the firmware upgrade) Solid Red CloudTrax check-in failure Key re-pair Configuration change AP not ready Net failure - no default route Gateway-Specific States STATE CloudTtrax check-in succeeded Flash White Flash Yellow Solid White Flash Red COLOR Solid Teal IP acquired via DHCP, but inet test is failing Flash Purple Repeater-Specific States STATE Checkin performed, mesh speed <= 2Mbps Orphan mode Lonely mode COLOR Flash Green Flash (Yellow), then Green Flash (Red), then Green checkin performed, mesh speed >2Mbps Solid Green 15 Additional resources To learn more about planning and optimizing your network, download theCloudtrax Network Planning Guide. To learn more about CloudTraxs splash page feature, download theUsing the Splash Page Editor Guide. To learn more about CloudTraxs vouchers feature, download theUsing Vouchers in CloudTrax Guide. To learn more about integrating vouchers with PayPal, download theUsing PayPal in CloudTrax Guide. 16 Product specifications Data rate (aggregate) 300 + 1430 Mbps Radio Antenna Max users (recommended) WLAN standard Processor Memory Zero config plug and play Self-forming, self-healing mesh Seamless roaming Hardware watchdog CPU Free cloud management Free iOS/Android apps Captive portal w/ bandwidth throttling, splash pages and user controls SSIDs SSID to VLAN tagging USB Ethernet Ports PoE LEDs Temperature Mounting Size Certifications Warranty 2.4 GHz: 2 stream, 802.11 b/g/n (max data rate: 300 Mbps) 5 GHz: 2 stream, 802.11 a/b/g/n/ac (max data rate: 1430 Mbps) 4 internal 30-60 per AP 802.11 a/b/g/n/ac MCU: IPQ4018 RF: IPQ4018, 2.4G/5G GE Ethernet PHY: QCA8072 128MB DRAM Yes Yes Yes Yes Yes Yes Yes 4 Yes Yes 2 x Gigabit 802.3af Nine-color LED status indicator: Boot Loader, Booting Up, Firmware Upgrade, CloudTrax Check-in Failure, Key Re-pair, Check-in Succeeded, Orphan Mode, Lonely Mode and more

-2050 C Ethernet or junction box (EU, UK, US), solid wall, solid ceiling, t-rail ceiling, outdoor wall or pole (universal installation kit included) 6.5 x 6.5 x 1.2 | .85 Lbs FCC, IC, CE, RCM 1 year 17 Appendix A:

18 Appendix B:

19 Appendix C:

EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:

Safety

-

-

-

-

-

EN 60950-1: 2006 EN 60950-1/A1: 2010 EN 60950-1/A11: 2009 EN 60950-1/A12: 2011 EN60950-1/A2:2013 MPE

-

EN 50385:2002 Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields

(110MHz - 40 GHz) - General public Radio

-

EN 300 328 V1.9.1:2015 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2.4GHz ISM band andusing wide band modulation techniques; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive EMC

-

-

EN 301 489-1 V1.9.2:2011 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements EN 301 489-17 V2.2.1:2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission Systems 20 esky

[Czech]

Dansk

[Danish]

Open Mesh tmto prohlauje, e tento [typ zazen] je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Undertegnede Open Mesh erklrer herved, at flgende udstyr [udstyrets typebetegnelse] overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Deutsch

[German]

Hiermit erklrt Open Mesh, dass sich das Gert [Gertetyp] in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. Eesti

[Estonian]

English Kesolevaga kinnitab Open Mesh seadme [seadme tp = type of equipment]

vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Hereby, Open Mesh, declares that this wireless router is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/

EC. Espaol

[Spanish]

Por medio de la presente Open Mesh declara que el [clase de equipo] cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

[Greek]

Open Mesh [type of equipment]

1999/5/. Franais

[French]

Par la prsente Open Mesh dclare que l'appareil [type d'appareil] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Italiano

[Italian]

Latviski

[Latvian]

Con la presente Open Mesh dichiara che questo [tipo di apparecchio]

conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Ar o Open Mesh deklar, ka [type of equipment / iekrtas tips] atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. Lietuvi

[Lithuanian]

iuo Open Mesh deklaruoja, kad is [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Nederlands

[Dutch]

Hierbij verklaart Open Mesh dat het toestel [type van toestel] in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti

[Maltese]

Hawnhekk, Open Mesh jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-

Dirrettiva 1999/5/EC. Magyar

[Hungarian]

Alulrott, Open Mesh nyilatkozom, hogy a [... tpus] megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. 21 Polski

[Polish]

Niniejszym Open Mesh owiadcza, e [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Portugus

[Portuguese

]

Slovensko

[Slovenian]

Open Mesh declara que este [tipo de equipamento] est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. Open Mesh izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES. Slovensky

[Slovak]

Open Mesh tmto vyhlasuje, e [typ zariadenia] spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES. Suomi

[Finnish]

Open Mesh vakuuttaa tten ett [type of equipment = laitteen tyyppimerkint] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Svenska

[Swedish]

Hrmed intygar Open Mesh att denna [utrustningstyp] str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. 22

Annex B 1-6583/18-01-01_AnnexB Internal photos of the Equipment Under Test This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized:

David Lang Lab Manager Radio Communications & EMC CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: mail@ctcadvanced.com Photos Photo 1 EUT top side (internal view) Photo 2 PCB top side 1-6583/18-01-01_AnnexB 2/5 Photo 3 PCB rear view Photo 4 EUT top cover (internal view) 1-6583/18-01-01_AnnexB 3/5 Photo 5 PCB top side (shielding removed) 1-6583/18-01-01_AnnexB 4/5 Document history Version Applied changes initial release Date of release 2018-07-06 1-6583/18-01-01_AnnexB 5/5

Annex A 1-6583/18-01-01_AnnexA External photos of the Equipment Under Test This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized:

David Lang Lab Manager Radio Communications & EMC CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: mail@ctcadvanced.com Photos Photo 1 EUT top view Photo 2 EUT side view 1-6583/18-01-01_AnnexA 2/7 Photo 3 EUT side view Photo 4 EUT side view 1-6583/18-01-01_AnnexA 3/7 Photo 5 Photo 6 1-6583/18-01-01_AnnexA 4/7 Photo 7 EUT label view Photo 8 EUT connectors 1-6583/18-01-01_AnnexA 5/7 Photo 9 EUT connectors 1-6583/18-01-01_AnnexA 6/7 Document history Version Applied changes initial release Date of release 2018-07-06 1-6583/18-01-01_AnnexA 7/7

are TEM ITE LIT IT IIE TELE LO TE NEE ee ee he ee 800009781V |

=0(j) Jeesg |

00:4p:80'p2:98:0V f see OVW [a] epee og sscoviam = OVA :}@POW

February 28, 2 Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 ATR ore tote A42, AP42, FCC ID: WT80MA42 granted on July 31, 2017 and IC: 10103A-OMA42 granted on August 15, 2017 TO WHOM IT MAY CONCERN Pursuant to CFR 2.1043 and RSP-100, Datto, Inc. hereby requests a Permissive Change ETB WA coceetotle Reason: To provide DFS bands with master functionality. Modifications:

No hardware changes were made, only software changes to add DFS bands with master functionality. The following new exhibits will be uploaded:

- Test report on radiated measurements RF Exposure Report External Photos DFS software testing reports ID Label Operational Description User Manual Sincerely, Wil ECB e ore ROR mM ntom e-)e)(R Oita Datto, Inc. 101 Merritt 7, Norwalk CT 06851 USA 1-888-294-6312

For the product stated above, we request permanent confidentiality for exhibits whic contain Operational Description, Block Diagram, Schematics, Parts Lists or Tune Up formation. The above exhibits contain our trade secrets and proprietary information that could be o fey=gl tia omelet sy=11 eles If you have any questions, please feel free to contact me at the address shown below. Sincerely, for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 February 28, 2019 Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID Model name WT80MA42 A42, AP42 101 Merritt 7 Norwalk, CT 06851

5 July 2017 TUV SUD BABT TCB/FCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Dear Sir or Madam, Datto, Inc., 101 Merritt 7, Norwalk, CT 06851 USA, on behalf of itself and its wholly-owned subsidiary Open Mesh, Inc.,111 SW 5th Ave, Suite #1150 Portland, OR 97204 USA, hereby authorize Delia Feng (Cerpass Technology Corporation, No.10, Lane 2, Lianfu Street, Luzhu Dist., Taoyuan City 33848, Taiwan, R.O.C.) to act as its agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. This authorization expires on Dec. 31, 2017. Sincerely, Company Officer: Michael Fass Telephone Number: 203-822-7722 Email: mfass@datto.com

Datto, Inc. 101 Merritt 7, Norwalk, CT 06851 USA Date: 2017/08/01 FEDERAL COMMUNICATION COMMISION 7435 Oakland Mills Rd Columbia MD 21046-1609 U.S.A. Subject: Request FCC C2PC for company Datto, Inc., acting on behalf of itself and its wholly-

owned subsidiary Open Mesh, Inc. (Grantee), FCC ID: WT8OMA42 To Whom It May Concern:

We, as the Grantee are submitting an application for FCC Class II Permissive Change of the product description: WiFi Access Point (FCC ID: WT80MA42, Original Grant Date: Jul. 31, 2017). This modification is only for concerned with adding outdoor use application;

neither circuit design nor main function has been changed. Only the output power of 5GHz UNII band 1 is reduced by software setting. itle: Michael Fass, Vice-President and Secretary Company Name: Datto, Inc. Tel: 203-822-7722

datto 5 July 2017 TUV SUD BABT TCB/FCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Dear Sir or Madam, Datto, Inc., 101 Merritt 7, Norwalk, CT 06851 USA, on behalf of itself and its wholly-owned subsidiary Open Mesh, Inc.,111 SW Sth Ave, Suite #1150 Portland, OR 97204 USA, hereby authorize Delia Feng

(Cerpass Technology Corporation, No.10, Lane 2, Lianfu Street, Luzhu Dist., Taoyuan City 33848, Taiwan, R.O.C.) to act as its agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. This authorization expires on Dec. 31, 2017. Michael Fass Company Officer: Michael Fass Telephone Number: 203-822-7722 Email: mfass@datto.com www.datto.com | 101 Merritt 7, Norwalk, CT 06851

datto 5 July 2017 TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Confidentiality Request FCC ID: WT8OMA42 Applicant: Datto, Inc. acting on behalf of itself and its wholly-owned subsidiary Open Mesh, Inc. Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commissions Rules, Applicant hereby requests permanent confidential treatment of information accompanying this application as outlined below:

Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, ame: MichaelFass Title: General Counsel www.datto.com | 101 Merritt 7, Norwalk, CT 06851

datto July 5, 2017 Subject: DoC declaration Re: Datto, Inc., acting on behalf of itself and its wholly-owned subsidiary Open Mesh, Inc. (Grantee) To Whom it may concern, We, as the Grantee of this project FCC ID: WT80MA42, would like to declare that the composite portion categorized as computer peripheral has been authorized under the Declaration of Conformity procedures. Brand Name and Model Name of the specified radio equipment:

OpenMesh or Datto / A42, AP42 FCC ID: WT8OMA42 Product Name: WiFi Access Point Regards, erat Counsel Company Name: Datto, Inc. Tel: 203-822-7722 www.datto.com | 101 Merritt 7, Norwalk, CT 06851