| all | frequencies |
|
exhibits | applications |
|---|---|---|---|---|
| manual |
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
User Manual rev | Users Manual | 1.36 MiB | ||||
| 1 | Attestation Statements | |||||||
| 1 | Cover Letter(s) | |||||||
| 1 | Cover Letter(s) | |||||||
| 1 | External Photos | |||||||
| 1 | Internal Photos | |||||||
| 1 | ID Label/Location Info | |||||||
| 1 | Operational Description | |||||||
| 1 | RF Exposure Info | |||||||
| 1 | Test Report | |||||||
| 1 | Test Setup Photos |
| 1 | User Manual rev | Users Manual | 1.36 MiB |
Wireless 802.11b/g/n Long Range Wireless N Mesh Router Client Bridge/Access Point Model:
OM2P v2 User Manual Version : 1.0 Table of Contents CHAPTER 1 PRODUCT OVERVIEW............................................................................................................................. 7 1.1 FEATURE ....................................................................................................................................................................... 7 1.2 BENEFITS....................................................................................................................................................................... 8 1.3 PACKAGE CONTENTS...................................................................................................................................................... 9 1.3 SYSTEM REQUIREMENT .................................................................................................................................................. 9 CHAPTER 2 HARDWARE OVERVIEW ........................................................................................................................10 CHAPTER 3 INSTALLATION .......................................................................................................................................11 CHAPTER 4 CONFIGURING YOUR COMPUTER FOR TCP/IP .................................................................................14 4.1 CONFIGURING MICROSOFT WINDOWS 7 ............................................................................................................................ 15 4.2 CONFIGURING MICROSOFT WINDOWS VISTA....................................................................................................................... 17 4.3 CONFIGURING MICROSOFT WINDOWS XP .......................................................................................................................... 19 4.4 CONFIGURING MICROSOFT WINDOWS 2000 ...................................................................................................................... 20 4.5 CONFIGURING AN APPLE MACINTOSH COMPUTER ................................................................................................................ 22 CHAPTER 5 INTRODUCING THE WEB CONFIGURATOR .....................................................................................................23 5.1 LOGGING IN TO THE WEB CONFIGURATOR ........................................................................................................................... 23 CHAPTER 6 STATUS ....................................................................................................................................................25 6.1 SAVE/LOAD................................................................................................................................................................. 25 6.2 MAIN ......................................................................................................................................................................... 26 6.3 WIRELESS CLIENT LIST ................................................................................................................................................. 27 6.4 SYSTEM LOG ............................................................................................................................................................... 28 6.5 CONNECTION STATUS .................................................................................................................................................. 29 6.6 DHCP CLIENT TABLE ................................................................................................................................................... 30 CHAPTER 7 SYSTEM....................................................................................................................................................31 7.1 CHANGING OPERATING MODES ................................................................................................................................... 31 CHAPTER 8 WIRELESS CONFIGURATION ................................................................................................................33 8.1 WIRELESS SETTINGS..................................................................................................................................................... 33 8.1.1 Access Point Mode ........................................................................................................................................ 33 8.1.2 Client Bridge Mode ....................................................................................................................................... 37 8.1.3 WDS Bridge Mode......................................................................................................................................... 39 8.1.4 Client Router Mode ....................................................................................................................................... 41 8.2 WIRELESS SECURITY SETTINGS...................................................................................................................................... 43 8.2.1 WEP ................................................................................................................................................................ 43 8.2.2 WPA-PSK ....................................................................................................................................................... 44 8.2.3 WPA2-PSK ..................................................................................................................................................... 45 8.2.4 WPA-PSK Mixed ............................................................................................................................................ 46 8.2.5 WPA................................................................................................................................................................ 47 8.2.6 WPA2 ............................................................................................................................................................. 48 8.2.7 WPA Mixed .................................................................................................................................................... 49 8.4 WIRELESS ADVANCED SETTINGS ................................................................................................................................... 50 8.5 WIRELESS MAC FILTER ................................................................................................................................................ 52 8.6 WDS LINK SETTINGS................................................................................................................................................... 53 CHAPTER 9 LAN SETUP ..............................................................................................................................................54 9.1 IP SETTINGS ................................................................................................................................................................ 54 9.2 SPANNING TREE SETTINGS ........................................................................................................................................... 55 CHAPTER 10 ROUTER SETTINGS ..............................................................................................................................56 10.1 WAN SETTINGS ........................................................................................................................................................ 56 10.1.1 Static IP ........................................................................................................................................................ 56 10.1.2 DHCP (Dynamic IP) .................................................................................................................................... 58 10.1.3 PPPoE (Point-to-Point Protocol over Ethernet) ........................................................................................ 60 10.1.4 PPTP (Point-to-Point Tunneling Protocol) ................................................................................................ 62 10.2 LAN SETTINGS (ROUTER MODE) ............................................................................................................................... 64 10.3 VPN PASS THROUGH ................................................................................................................................................ 65 10.4 PORT FORWARDING .................................................................................................................................................. 66 10.5 DMZ ....................................................................................................................................................................... 68 CHAPTER 11 MANAGEMENT SETTINGS..................................................................................................................69 11.1 ADMINISTRATION ...................................................................................................................................................... 69 11.2 MANAGEMENT VLAN ............................................................................................................................................... 71 11.3 SNMP SETTINGS ...................................................................................................................................................... 72 11.4 BACKUP/RESTORE SETTINGS ...................................................................................................................................... 73 11.5 FIRMWARE UPGRADE................................................................................................................................................. 74 11.6 TIME SETTINGS.......................................................................................................................................................... 75 11.7 LOG.......................................................................................................................................................................... 76 11.8 DIAGNOSTICS............................................................................................................................................................ 77 CHAPTER 12 NETWORK CONFIGURATION EXAMPLES.........................................................................................78 12.1 ACCESS POINT .......................................................................................................................................................... 78 12.2 CLIENT BRIDGE MODE ............................................................................................................................................... 79 12.3 WDS BRIDGE MODE ................................................................................................................................................. 80 12.4 CLIENT ROUTER......................................................................................................................................................... 81 CHAPTER 13 BUILDING A WIRELESS NETWORK ...................................................................................................81 13.1 ACCESS POINT MODE................................................................................................................................................ 82 13.2 ACCESS POINT MODE WITH WDS FUNCTION ............................................................................................................. 82 13.3 CLIENT BRIDGE MODE ............................................................................................................................................... 83 13.4 WDS BRIDGE MODE ................................................................................................................................................. 83 13.5 CLIENT ROUTER MODE .............................................................................................................................................. 84 13.6 RADIUS CONNECTIONS ........................................................................................................................................... 84 APPENDIX A TROUBLESHOOTING .................................................................................................................................85 A.1 PROBLEM SOLVING......................................................................................................................................................... 85 A.2 CONTACTING TECHNICAL SUPPORT .................................................................................................................................... 86 APPENDIX B SPECIFICATIONS .......................................................................................................................................87 APPENDIX C GLOSSARY ................................................................................................................................................88 APPENDIX D FCC INTERFERENCE STATEMENT ...............................................................................................................93 About This Document Audience This document is written for networking professionals responsible for installing and managing the EnGenius ENH Series Outdoor Access Point/Bridge. To use this guide, you should have knowledge about TCP/IP and IEEE 802.11 standards, and be familiar with the concepts and terminology associated with wireless local-area networks (WLANs). This document provides the information you need to install and configure your Access Point/bridge. Convention This publication uses these conventions/symbols to convey instructions and information and highlight special message. Caution: This symbol represents the important message on incorrect device operation that might damage the device Note: This symbol represents the important message for the settings. Tip: This symbol represents the alternative choice that can save time or resources. Icons used Figures in this document may use the following generic icons. EHN device Internet Power adapter WLAN signal Client computer desktop Client computer laptop PoE injector Chapter 1 Product Overview Thank you for choosing OM2P V2. The OM2P V2 is a long range, high-performance IEEE 802.11b/g/n network solution that provides Access Point, Client Bridge, WDS, and Client Router functions in a single device. In addition to providing the latest wireless technology, the OM2P V2 supports Power over Ethernet and Power by Adapter capabilities, which allow the device to be installed easily in nearly any indoor or outdoor location. Advanced features include power level control, narrow bandwidth selection, traffic shaping, and Real-time RSSI indication. A variety of security features help to protect your data and privacy while you are online. Security features include Wi-Fi Protected Access (WPA-PSK/WPA2-PSK), 64/128/152-bit WEP Encryption, and IEEE 802.1x with RADIUS. 1.1 Feature The following list summarizes the key features of the OM2P V2:
- High-speed data rates up to 150 Mbps make the OM2P V2 ideally suited for handling heavy data payloads such as MPEG video streaming
-
Fully Interoperable with IEEE 802.11b/IEEE 802.11g/IEEE 802.11n-compliant devices
- Multi-function capabilities enable users to use different modes in various environments
-
Point-to-point and point-to-multipoint wireless connectivity enable data transfers between two or more buildings
- Channel bandwidth selection allows the appropriate bandwidth to be used to reach various distances
-
RSSI indicator makes it easy to select the best signal for Access Point connections
- Power-over-Ethernet capabilities allow for flexible installation locations and cost savings
-
Four SSIDs let clients access different networks through a single Access Point, and assign different policies and functions for each SSID
- WPA2/WPA/ WEP/ IEEE 802.1x support and MAC address filtering ensure secure network connections
-
PPPoE/PPTP function support make it easy to access the Internet via Internet Service Provider (ISP) service authentication
- SNMP Remote Configuration Management helps administrators remotely configure or manage the Access Point
- QoS (WMM) support enhances performance and user experiences 1.2 Benefits The OM2P V2 is the ideal product around which you can build your WLAN. The following list summarizes a few key advantages that WLANs have over wired networks:
Ideal for hard-to-wire environments There are many scenarios where cables cannot be used to connect networking devices. Historic and older buildings, open areas, and busy streets, for example, make wired LAN installations difficult, expensive, or impossible. Temporary workgroups WLANs make it easy to provide connectivity to temporary workgroups that will later be removed. Examples include parks, athletic arenas, exhibition centers, disaster-recovery shelters, temporary offices, and construction sites. Ability to access real-time information With a WLAN, workers who rely on access to real-time information, such as doctors and nurses, point-of-sale employees, mobile workers, and warehouse personnel, can access the data they need and increase productivity, without having to look for a place to plug into the network. Frequently changed environments WLANs are well suited for showrooms, meeting rooms, retail stores, and manufacturing sites where workplaces are rearranged frequently. Wireless extensions to Ethernet networks WLANs enable network managers in dynamic environments to minimize overhead caused by moves, extensions to networks, and other changes. Wired LAN backup Network managers can implement WLANs to provide backup for mission-critical applications running on wired networks. Mobility within training/educational facilities Training sites at corporations and students at universities are a few examples where wireless connectivity can be used to facilitate access to information, information exchanges, and learning. 1.3 Package Contents Open the package carefully and make sure it contains all of the items listed below.
- One EnGenius Wireless Access Point / Client Bridge (OM2P V2) If any item is missing or damaged, contact your place of purchase immediately. Keep all packing materials in case you need to return the OM2P V2. The OM2P V2 must be returned with its original packing materials. Use only the power adapter supplied with your OM2P V2. Using a different power adapter can damage the OM2P V2. 1.3 System Requirement To install the OM2P V2, you need an Ethernet cable and a computer equipped with:
- An Ethernet interface
- One of the following operating systems: Microsoft Windows XP, Vista, or 7; or Linux
- An Internet browser that supports HTTP and JavaScript Chapter 2 Hardware Overview The following figures show the key components on the OM2P V2. 2.1 Bottom View The bottom panel of the OM2P V2 contains two RJ-45 ports, a PoE interface, and a Reset button. A removable cover covers these components.
- The RJ-45 port connects to an Ethernet adapter in a computer you use to configure the OM2P V2. For more information, see Chapter 4.
- The PoE interface allows the OM2P V2 to be powered using the supplied PoE injector.
- The Reset button can be used to reboot the OM2P V2 and return the device to its default factory configuration, erasing any overrides you may have made to the devices default settings. The Reset button is recessed to prevent accidental resets. To reboot the OM2P V2, use a flat object such as a pencil to press the Reset button for approximately 10 seconds and then stop pressing the Reset button. 2.2 Back Panel The back panel of the OM2P V2 contains the LED indicators that show the link quality and status of the OM2P V2. Chapter 3 Installation This chapter describes how to install the OM2P V2. It also describes the OM2P V2 LEDs. Only experienced installation professionals who are familiar with local building and safety codes and, wherever applicable, are licensed by the appropriate government regulatory authorities should install the OM2P V2. 3.1 Pre-installation Guidelines Select the optimal locations for the equipment using the following guidelines:
- The OM2P V2 should be mounted on a 1"-4" pole. Its location should enable easy access to the unit and its connectors for installation and testing.
- The higher the placement of the antenna, the better the achievable link quality.
- The antenna should be installed to provide a direct, or near line of sight with the Base Station antenna. The antenna should be aligned to face the general direction of the Base Station. 3.2 Installing the OM2P V2 To install the OM2P V2, use the following procedure to mount the device on a pole and refer to the figure below. 1. The bottom of the OM2P V2 is a movable cover. Grab the cover and pull it back hard to remove the cover. 2. Insert a standard Ethernet cable into the RJ-45 port labeled MAIN LAN. 3. Slide the cover back to seal the bottom of the OM2P V2. 4. Remove the power cord and PoE injector from the box and plug the power cord into the DC port of the PoE injector. Only use the power adapter supplied with the OM2P V2. Using a different power adapter might damage the OM2P V2. 5. Plug the other side of the Ethernet cable in step 3 into the PoE port of the PoE injector. When you finish step 5, the installation will resemble the following picture. 6. Turn over the OM2P V2. Then insert the mast strap through the middle hole of the OM2P V2. Use a screwdriver to unlock the pole-mounting ring putting it through the OM2P V2. 7. Mount the EOA200 securely to the pole by locking the strap tightly. This completes the installation procedure. 3.2 Understanding the OM2P V2 LEDs The rear of the OM2P V2 has two groups of LEDs. One group, labeled INDICATORS, shows the status of the device. The second group, LINK QUALITY, shows the strength of the link between the OM2P V2 and the network. The following table describes the OM2P V2 LEDs. LED Power LAN Color Green Green WLAN Green Status Mode OFF= OM2P V2 is not receiving power. ON= OM2P V2 is receiving power. OFF = OM2P V2 is not connected to the network. ON = OM2P V2 is connected to the network, but not sending or receiving data. Blink = OM2P V2 is sending or receiving data. Access Point or Client Bridge Mode OFF = OM2P V2 radio is off and the device is not sending or receiving data over the wireless LAN. ON = OM2P V2 radio is on, and the device is not sending or receiving data over the wireless LAN. Blink = OM2P V2 radio is on, and the device is sending or receiving data over the wireless LAN. Shows the strength of the link between the OM2P V2 and the network. G = good quality (green). Y = medium quality (yellow). R = poor or no link (red). Link Quality See Status column Access Point or Client Bridge Mode Chapter 4 Configuring Your Computer for TCP/l P To configure the OM2P V2use a computer that is configured for TCP/IP. This chapter describes how to configure the TCP/IP settings on a computer that will be used to configure the OM2P V2. 4.1 Configuring Microsoft Windows 7 Use the following procedure to configure a computer running Microsoft Windows 7. 1. In the Start menu search box, type: ncpa.cpl 2. When the Network Connections List appears, right-click the Local Area Connection icon and click Properties. 3. In the Networking tab, click either Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then click Properties. 4. In the properties dialog box, click Obtain an IP address automatically to configure your computer for DHCP. 5. Click the OK button to save your changes and close the dialog box. 6. Click the OK button again to save your changes. 4.2 Configuring Microsoft Windows Vista Use the following procedure to configure a computer running Microsoft Windows Vista with the default interface. If you use the Classic interface, where the icons and menus resemble previous Windows versions, perform the procedure in section 4.4. 1. On the Windows taskbar, click Start, click Control Panel, and then select the Network and Internet icon. 2. Click View Networks Status and tasks and then click Management Networks Connections. 3. Right-click the Local Area Connection icon and click Properties. 4. Click Continue. The Local Area Connection Properties dialog box appears. 5. In the Local Area Connection Properties dialog box, verify that Internet Protocol
(TCP/IPv4) is checked. Then select Internet Protocol (TCP/IPv4) and click the Properties button. The Internet Protocol Version 4 Properties dialog box appears. 6. In the Internet Protocol Version 4 Properties dialog box, click Obtain an IP address automatically to configure your computer for DHCP. 7. Click the OK button to save your changes and close the dialog box. 8. Click the OK button again to save your changes. 4.3 Configuring Microsoft Windows XP Use the following procedure to configure a computer running Microsoft Windows XP with the default interface. If you use the Classic interface, where the icons and menus resemble previous Windows versions, perform the procedure in section 4.4. 1. On the Windows taskbar, click Start, click Control Panel, and then click Network and Internet Connections. 2. Click the Network Connections icon. 3. Click Local Area Connection for the Ethernet adapter connected to the OM2P V2. The Local Area Connection Status dialog box appears. 4. In the Local Area Connection Status dialog box, click the Properties button. The Local Area Connection Properties dialog box appears. 5. In the Local Area Connection Properties dialog box, verify that Internet Protocol (TCP/IP) is checked. Then select Internet Protocol (TCP/IP) and click the Properties button. The Internet Protocol (TCP/IP) Properties dialog box appears. 6. In the Internet Protocol (TCP/IP) Properties dialog box, click Obtain an IP address automatically to configure your computer for DHCP. Click the OK button to save this change and close the Internet Protocol (TCP/IP) Properties dialog box. 7. Click the OK button again to save your changes. 8. Restart your computer. 4.4 Configuring Microsoft Windows 2000 Use the following procedure to configure your computer if your computer has Microsoft Windows 2000 installed. 1. On the Windows taskbar, click Start, point to Settings, and then click Control Panel. 2. In the Control Panel window, double-click the Network and Dial-up Connections icon. If the Ethernet adapter in your computer is installed correctly, the Local Area Connection icon appears. 3. Double-click the Local Area Connection icon for the Ethernet adapter connected to the OM2P V2. The Local Area Connection Status dialog box appears. 4. 5. In the Local Area Connection Status dialog box, click the Properties button. The Local Area Connection Properties dialog box appears. In the Local Area Connection Properties dialog box, verify that Internet Protocol (TCP/IP) is checked. Then select Internet Protocol (TCP/IP) and click the Properties button. 6. Click Obtain an IP address automatically to configure your computer for DHCP. 7. Click the OK button to save this change and close the Local Area Connection Properties dialog box. 8. Click OK button again to save these new changes. 9. Restart your computer. 4.5 Configuring an Apple Macintosh Computer The following procedure describes how to configure TCP/IP on an Apple Macintosh running Mac OS 10.2. If your Apple Macintosh is running Mac OS 7.x or later, the steps you perform and the screens you see may differ slightly from the following. However, you should still be able to use this procedure as a guide to configuring your Apple Macintosh for TCP/IP. 1. Pull down the Apple Menu, click System Preferences, and select Network. 2. Verify that the NIC connected to the OM2P V2 is selected in the Show field. 3. In the Configure field on the TCP/IP tab, select Using DHCP. 4. Click Apply Now to apply your settings and close the TCP/IP dialog box. Chapter 5 Introducing the Web Configurator The OM2P V2 has a built-in Web Configurator that lets you manage the unit from any location using a Web browser that supports HTTP and has JavaScript installed. 5.1 Logging in to the Web Configurator After configuring the computer for TCP/IP using the procedure appropriate for your operating system, use that computers Web browser to log in to the OM2P V2 Web Configurator. 1. Launch your Web browser. 2. In the browser address bar, type 192.168.1.1 and press the Enter key. If you changed the OM2P V2 LAN IP address, enter the correct IP address. 3. When the Windows Security window appears, type admin as the username in the top field and type admin as the password in the bottom field. 4. Click OK You are now ready to use the instructions in the following chapters to configure the OM2P V2. 5.2 Best Practices Perform the following procedures regularly to make the OM2P V2 more secure and manage the OM2P V2 more effectively.
- Change the default password. Use a password that is not easy to guess and that contains different characters, such as numbers and letters. The OM2P V2 username cannot be changed. For more information, see page 69.
- Back up the configuration and be sure you know how to restore it. Restoring an earlier working configuration can be useful if the OM2P V2 becomes unstable or crashes. If you forget your password, you will have to reset the OM2P V2 to its factory default settings and lose any customized override settings you configured. However, if you back up an earlier configuration, you will not have to completely reconfigure the OM2P V2. You can simply restore your last configuration. For more information, see page 73. Chapter 6 Status The Status section on the navigation drop-down menu contains the following options:
- Main
- Wireless Client List
-
- Connection Status System Log The following sections describe these options. 6.1 Save/Load This page lets you save and apply the settings shown under Unsaved changes list, or cancel the unsaved changes and revert to the previous settings that were in effect. 6.2 Main Clicking the Main link under the Status drop-down menu or clicking Home at the top-right of the Web Configurator shows status information about the current operating mode.
- The System Information section shows general system information such as operating mode, system up time, firmware version, serial number, kernel version, and application version.
- The LAN Settings section shows Local Area Network setting such as the LAN IP address, subnet mask, and MAC address.
- The Current Wireless Settings section shows wireless information such as frequency and channel. Since the OM2P V2 supports multiple-SSIDs, information about each SSID, such as its ESSID and security settings, are displayed. 6.3 Wireless Client List Clicking the Wireless Client List link under the Status drop-down menu displays the list of clients associated to the OM2P V2, along with the MAC addresses and signal strength for each client. Clicking the Refresh button updates (refreshes) the client list. 6.4 System Log The OM2P V2 automatically logs (records) events of possble nterest n ts nternal memory.To vew the logged nformatonclick the System Log lnk under the Status drop-
down menu.I there s not enough nternal memory to log all events older events are deleted from the log. System Log Home Resel Oct 19 10:16:58 (none)user.warn kernel: jffs2 build filesystem(): era3ing
JY1 AII
ct 19 10:16:58 (none)user.info kernel: mni fo: u
Oct 19 10:16:58 (none)user.info kernel: mni fo: using base directory:
/ Oct 19 10:16:34 (none)user.warn kernel: jffs2 3can eraseblock(): End of f Oct 19 10:16:34 (none)user.warn kernel: jffs2 build filesystem():
unlocki ct 19 10:16:33 (none)user.warn kernel: ar5416SetSwitchComant 3witch co sing 3torage directory:
r-
-
Oct 19 10:16:33 (none)daemon.info dnsmsq[823]: using local addresses onl Oct 19 10:16:33 (none)daemon.info dnsmsq[823]: using local addresses onl Oct 19 10:16:33 (none)daemon.info dnsmasq[823): startedve i 2.52 cac'---'
Oct 19 10:16:33 (none)daemon.info dnsmasq[823): readinq //resolv.conf Oct 19 10:16:33 (none)daemon.info dnsmasq[823): read /etc/hosts - 1 addre Oct 19 10:16:33 (none)daemon.info dnsmasq[823): compi1e time options: Iv ct 19 10:16:31 (none)user.info kernel: device athO entered promscuou3
m Oct 19 10:16:31 (none)user.info kernel: br-lan: topology change detected Oct 19 10:16:31 (none)user.info kernel: br-lan: port 3(athO) entering lea Oct 19 10:16:31 (none)user.info kernel: br-lan: port 3(athO) entering for ct 19 10:16:30 (none)user.warn kernel: osif vap init : wait for connecti Oct 19 10:16:30 (none)user.info kernel: device athO left promscuou3 mode
Oct 19 10:16:25 (none)user.warn kernel: set SIOC80211NWID8 characters Oct 19 10:16:25 (none)user.warn kernel: osif vap init 'r1akeup from 'r1ait
( I
Oct 19 10:16:30 (none)user.info kernel: br-lan: port 3(athO) entering dis ct 19 10:16:25 (none)user.warn kernel: start running 111 1 Rerresh 11 Clear l 6.5 Conneetion StatU$
Clicking the Connection Status link under the Stat drop-down menu displays the current status of the network The information shown includes network type SSIDBSSIDconnection status wireless mode current channel securitydata ratenoise level and signal strength. Wireless I llient Router IIEnGenius I Netwo Type SSID BSSID Connection S s Wire ss Mode Current Channel S urity Tx Da Ra Mbps) Current n se vel S nal strength WAN I Refl:esh I 6.6 DHCP Client Table Clicking the DHCP Client List link under the Status drop-down menu displays the clients that are associated to the OM2P V2 through DHCP.The MAC addresses and signal strength for each client are also shown. Clicking the Refresh button updates (refreshes) the client list DHCP Client list Home Resel MAC addr 11 IP 11 Expires I Refl:esh I Chapter 7 System This chapter describes how to change the OM2P V2 operating modes. 7.1 Changing Operating Modes The OM2P V2 supports four operating modes:
- Access Point
- Client Bridge
- WDS Bridge
- Client Router To select an operating mode, click System Properties under System Section. Then go to System > Operation mode. Device Name: Enter a name for the device. The name you type appears in SNMP management. This name is not the SSID and is not broadcast to other devices. Operation Mode: Use the radio button to select an operating mode. To use Access Point mode with WDS, select Access Point here and then enable the WDS function in the Wireless Network section (see section 8.6). Click Accept to confirm the changes. Clicking Accept does not apply the changes. To apply themuse Status > Save/Load (see section 4.1) Chapter 8 Wireless Configuration This chapter describes the OM2P V2s wireless settings. Please read the information in this chapter carefully. If you configure a setting improperly, it can impact performance and affect the network adversely. Before you continue, be sure you selected the appropriate operating mode (see Chapter 7). 8.1 Wireless Settings This section describes basic wireless settings. For more information, see Chapter 12. 8.1.1 Access Point Mode The OM2P V2 supports Access Point Mode. In this mode, users with a wireless client device within range can connect to the OM2P V2 to access the WLAN. The following figure shows an example of an OM2P V2 operating in Access Point Mode. The sections that follow the figure below describe how to configure your OM2P V2 for Access Point Mode. Wireless Mode Channel HT Mode Extension Channel Auto AP Detection Current Profile Wireless mode supports 802.11b/g/n mixed modes. The default channel bandwidth is 40 MHz. The larger the channel, the better the transmission quality and speed. Select upper or lower channel. Your selection may affect the Auto channel function. Check this option to enable auto-channel selection. AP Detection can select the best channel to use by scanning nearby areas for Access Points. Configure up to four different SSIDs. If many client devices will be accessing the network, you can arrange the devices into SSID groups. Click Edit to configure the profile and check whether you want to enable extra SSID. Profile Isolation Accept / Cancel Restricted Client to communicate with different VID by Selecting the radio button. Click Accept to confirm the changes or Cancel to cancel and return previous settings. Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 4.1). SSID VLAN ID Suppressed SSID Station Separation Wireless Security Save / Cancel Specify the SSID for the current profile. Specify the VLAN tag for the current profile. Check this option to hide the SSID from clients. If checked, the SSID will not appear in the site survey. Click the appropriate radio button to allow or prevent communication between client devices. See the Wireless Security section. Click Save to accept the changes or Cancel to cancel and return previous settings. 8.1.2 Client Bridge Mode Client Bridge Mode lets you connect two LAN segments via a wireless link as though they are on the same physical network. Since the computers are on the same subnet, broadcasts will reach all machines. As a result, DHCP information generated by the server will reach all client computers as though the clients resided on one physical network. The following figure shows an example of an OM2P V2 communicating with an Access Point/Wireless Router, such as the EnGenius EOA7530, operating in Client Bridge Mode. The sections that follow the figure below describe how to configure your OM2P V2 for Client Bridge Mode. Wireless Mode SSID Site Survey Wireless mode supports 802.11b/g/n mixed modes. Specify the SSID if known. This field is completed automatically if you select an Access Point in the Site Survey. Scans nearby locations for Access Points. You can select a discovered Access Point to establish a connection. Enter the MAC address if known. If you select an Access Point in the Site Survey, this field is completed automatically. Click the appropriate radio button to enable or disable WDS Client. See section 8.2 for information. Click Accept to confirm the changes or Cancel to cancel and return previous settings. Prefer BSSID WDS Client Wireless Security Accept / Cancel Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 4.1). Profile Wireless Security Refresh If you used the Site Survey, the Web Configurator shows nearby Access Points. To connect to an Access Point, click the Access Points BSSID. See the Wireless Security section. Click Refresh to scan again. If the Access Point has been configured to suppress its SSID, the SSID section will be blank and must be completed manually. 8.1.3 WDS Bridge Mode Unlike traditional bridging. WDS Bridge Mode allows you to create large wireless networks by linking several wireless access points with WDS links. WDS is normally used in large, open areas, where pulling wires is cost prohibitive, restricted or physically impossible. The following figure shows an example of three OM2P V2 configured for WDS Bridge Mode communicating with each other. In this configuration, the OM2P V2 device on the left side of the figure behaves as a standard bridge that forwards traffic between the WDS links (links that connect to other OM2P V2 WDS bridges). The sections that follow the figure below describe how to configure your OM2P V2 for WDS Bridge Mode. Wireless Mode Channel HT Mode Extension Channel Accept / Cancel Wireless mode supports 802.11b/g/n mixed modes. The default channel bandwidth is 40 MHz. The larger the channel, the better the transmission quality and speed. Select upper or lower channel. Your selection may affect the Auto channel function. Click Accept to confirm the changes or Cancel to cancel and return previous settings. Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 4.1). MAC Address Mode Accept / Cancel Enter the MAC address of the Access Point to which you want to extend wireless connectivity. Select Disable or Enable to disable or enable WDS. Click Accept to confirm the changes or Cancel to cancel and return previous settings. 1. Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 4.1). 2. The Access Point to which you want to extend wireless connectivity must enter the OM2P V2s MAC address into its configuration. For more information, refer to the documentation for the Access Point. Not all Access Point supports this feature. 8.1.4 Client Router Mode In Client Router Mode, you can access the Internet wirelessly with the support of a WISP. In AP Router Mode, the OM2P V2 can access the Internet via a cable or DSL modem. In this mode, the OM2P V2 can be configured to turn off the wireless network name (SSID) broadcast, so that only stations that have the SSID can be connected. The OM2P V2 also provides wireless LAN 64/128/152-bit WEP encryption security, WPA/WPA2, and WPA-PSK/WPA2-PSK authentication, as well as TKIP/AES encryption security. It also supports VPN pass-through for sensitive data secure transmission. The following figure shows an example of an OM2P V2 communicating with a Wireless ISP
(WISP) Access Point in Client Router Mode. The sections that follow the figure below describe how to configure your OM2P V2 for Client Router Mode. Wireless Mode SSID Site Survey Wireless mode supports 802.11b/g/n mixed modes. Specify the SSID if known. This field is completed automatically if you select an Access Point in the Site Survey. Scans nearby locations for Access Points. You can select a discovered Access Point to establish a connection. Prefer BSSID Wireless Security Accept / Cancel Enter the MAC address if known. If you select an Access Point in the Site Survey, this field is completed automatically. See section 10.2. Click Accept to confirm the changes or Cancel to cancel and return previous settings. Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 4.1). Profile Wireless Security Refresh If you used the Site Survey, the Web Configurator shows nearby Access Points. To connect to an Access Point, click the Access Points BSSID. See the Wireless Security section. Click Refresh to scan again. If the Access Point has been configured to suppress its SSID, the SSID section must be completed manually. 8.2 Wireless Security Settings The Wireless Security Settings section lets you configure the EOH200s security modes: WEP, WPA-PSK, WPA2-PSK, WPA-PSK Mixed, WPA, WPA2, and WPA Mixed. We strongly recommend you use WPA2-PSK. 8.2.1 WEP Security Mode Auth Type Input Type Key Length Default Key default. Key1 Key2 Key3 Key4 Select WEP from the drop-down list to begin the configuration. Select Open System or Shared. Select an input type of Hex or ASCII. Level of WEP encryption applied to all WEP keys. Choices are Select a 64/128/152-bit password lengths. Specify which of the four WEP keys the OM2P V2 uses as its Specify a password for security key index No.1. For security, each typed character is masked by a dot (l). Specify a password for security key index No.2. For security, each typed character is masked by a dot (l). Specify a password for security key index No.3. For security, each typed character is masked by a dot (l). Specify a password for security key index No.4. For security, each typed character is masked by a dot (l). 802.11n does not allow WEP/WPA-PSK/WPA-PSK TKIP security mode. The connection mode will drop from 802.11n to 802.11g. 8.2.2 WPA-PSK Security Mode Encryption Select WPA-PSK from the drop-down list to begin the configuration. Select Both, TKIP, or AES as the encryption type. Both = uses TKIP and AES. TKIP = automatic encryption with WPA-PSK; requires passphrase. AES = automatic encryption with WPA2-PSK; requires passphrase. Passphrase Specify the security password. For security, each typed character is masked by a dot (l). Specify how often, in seconds, the group key changes. Group Key Update Interval 802.11n does not allow WEP/WPA-PSK/WPA-PSK TKIP security mode. The connection mode will drops from 802.11n to 802.11g. 8.2.3 WPA2-PSK Security Mode Encryption Select WPA2-PSK from the drop-down list to begin the configuration. Select Both, TKIP, or AES as the encryption type. Both = uses TKIP and AES. TKIP = automatic encryption with WPA-PSK; requires passphrase. AES = automatic encryption with WPA2-PSK; requires passphrase. Passphrase Specify the security password. For security, each typed character is masked by a dot (l). Specify how often, in seconds, the group key changes. Group Key Update Interval 802.11n does not allow WEP/WPA-PSK/WPA-PSK TKIP security mode. The connection mode will change from 802.11n to 802.11g. 8.2.4 WPA-PSK Mixed Security Mode Encryption Select WPA-PSK Mixed from the drop-down list to begin the configuration. Select Both, TKIP, or AES as the encryption type. Both = uses TKIP and AES. TKIP = automatic encryption with WPA-PSK; requires passphrase. AES = automatic encryption with WPA2-PSK; requires passphrase. Passphrase Specify the security password. For security, each typed character is masked by a dot (l). Specify how often, in seconds, the group key changes. Group Key Update Interval WPA-PSK Mixed can allow multiple security modes at the same time. 802.11n does not allow WEP/WPA-PSK/WPA-PSK TKIP security mode. The connection mode will change from 802.11n to 802.11g. 8.2.5 WPA Security Mode Encryption Radius Server Radius Port Radius Secret Group Key Update Interval Both = uses TKIP and AES. TKIP = automatic encryption with WPA-PSK. AES = automatic encryption with WPA2-PSK. Select WPA from the drop-down list to begin the configuration. Select Both, TKIP, or AES as the encryption type. Specify the IP address of the RADIUS server. Specify the port number that your RADIUS server uses for authentication. Default port is 1812. Specify RADIUS secret furnished by the RADIUS server. Specify how often, in seconds, the group key changes. 802.11n does not allow WEP/WPA-PSK/WPA-PSK TKIP security mode. The connection mode will drops from 802.11n to 802.11g. 8.2.6 WPA2 Security Mode Encryption Radius Server Radius Port Radius Secret Group Key Update Interval Both = uses TKIP and AES. TKIP = automatic encryption with WPA-PSK. AES = automatic encryption with WPA2-PSK. Select WPA2 from the drop-down list to begin the configuration. Select Both, TKIP, or AES as the encryption type. Specify the IP address of the RADIUS server. Specify the port number that your RADIUS server uses for authentication. Default port is 1812. Specify RADIUS secret furnished by the RADIUS server. Specify how often, in seconds, the group key changes. 802.11n does not allow WEP/WPA-PSK/WPA-PSK TKIP security mode. The date rate will drop from 802.11n to 802.11g. 8.2.7 WPA Mixed Both = uses TKIP and AES. TKIP = automatic encryption with WPA-PSK. AES = automatic encryption with WPA2-PSK. Select WPA Mixed from the drop-down list to begin the configuration. Select Both, TKIP, or AES as the encryption type. Specify the IP address of the RADIUS server. Specify the port number that your RADIUS server uses for authentication. Default port is 1812. Specify RADIUS secret furnished by the RADIUS server. Specify how often, in seconds, the group key changes. Security Mode Encryption Radius Server Radius Port Radius Secret Group Key Update Interval 802.11n does not allow WEP/WPA-PSK/WPA-PSK TKIP security mode. The connection mode will change from 802.11n to 802.11g. 8.4 Wireless Advanced Settings Data Rate Select a data rate from the drop-down list. The data rate affects throughput. If you select a low data rate value, for example, the throughput is reduced but the transmission distance increases. RTS/CTS Threshold Distance Antenna Selection Short GI Aggregation Specify the threshold package size for RTC/CTS. A small number causes RTS/CTS packets to be sent more often and consumes more bandwidth. Specify the distance between Access Points and clients. Longer distances may drop high-speed connections. Specify the internal antenna type. Sets the time that the receiver waits for RF reflections to settle out before sampling data. Using a short (400ns) guard interval can increase throughput, but can also increase error rate in some installations due to increased sensitivity to radio-frequency reflections. Select the option that works best for your installation. Merges data packets into one packet. This option reduces the Wireless Traffic Shaping number of packets, but increases packet sizes. Check this option to enable wireless traff ic shaping. Traffic shaping regulates the flow of packets leaving an interface to deliver improved Quality of Service. Incoming Traffic Limit Specify the wireless transmission speed used for downloading. Outgoing Traffic Limit Specify the wireless transmission speed used for uploading. Accept / Cancel Click Accept to confirm the changes or Cancel to cancel and return previous settings. 1. Changing Wireless Advanced Settings may adversely affect wireless performance. Please accept all default settings, unless you are familiar with the wireless options. 2. Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 4.1). 8.5 Wireless MAC Filter Wireless MAC Filters are used to allow or deny network access to wireless clients according to their MAC addresses. You can manually add a MAC address to restrict the permission to access OM2P V2. The default setting is Disable Wireless MAC Filters. ACL Mode MAC Address Filter Add Apply Determines whether network access is granted or denied to clients whose MAC addresses appear in the MAC Address table on this page. Choices are Disable, Deny MAC in the list, or Allow MAC in the list. Enter the MAC address of the device. Click Add to add the MAC address to the MAC Address table. Click Apply to apply the changes. 0. 8.6 WDS Link Settings Using WDS Link Settings, you can create a wireless backbone link between multiple access points that are part of the same wireless network. This allows a wireless network to be expanded using multiple Access Points without the need for a wired backbone to link them, as is traditionally required. MAC Address Mode Accept / Cancel Enter the Access Points MAC address to which you want to extend the wireless area. Select Disable or Enable from the drop-down list. Click Accept to confirm the changes or Cancel to cancel and return previous settings. Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 4.1). The Access Point to which you want to extend wireless connectivity must enter the OM2P V2s MAC address into its configuration. For more information, refer to the documentation for the Access Point. Not all Access Point supports this feature. Chapter 9 LAN Setup This chapter describes the OM2P V2 Local Area Network (LAN) settings. 9.1 IP Settings This section is only available for Non-Router Mode. IP settings lets you configure the OM2P V2 LAN port IP address. IP Network Setting IP Address V2. IP Suet Mask Default Gateway gateway. Primary DNS Secondary DNS DNS. Accept / Cancel Select whether the OM2P V2 IP address will use the static IP address specif ied in the IP Address field or be obtained automatically when the OM2P V2 connects to a device that has a DHCP server . Enter the IP address of the OM2P Enter the OM2P V2 subnet mask. Enter the OM2P V2 default Enter the OM2P V2 primary DNS. Enter the OM2P V2 secondary Click Accept to confirm the changes or Cancel to cancel and return previous settings. If you change the LAN IP address, you will be directed to the new IP address after you click Apply. 9.2 Spanning Tree Settings Spanning Tree Status Bridge Hello Time Bridge Max Age Enable or disable the OM2P V2 Spanning Tree function. Specify Bridge Hello Time, in seconds. This value determine how often the OM2P V2 sends hello packets to communicate information about the topology throughout the entire Bridged Local Area Network Specify Bridge Max Age, in seconds. If another bridge in the spanning tree does not send a hello packet for a long period of time, it is assumed to be dead. Bridge Forward Delay Specify Bridge Forward Delay, in seconds. Forwarding delay time is the time spent in each of the Listening and Learning states before the Forwarding state is entered. This delay is provided so that when a new bridge comes onto a busy network, it looks at some traffic before participating. Specify the Priority number. Smaller number has greater priority. Click Accept to confirm the changes or Cancel to cancel and return previous settings. Priority Accept / Cancel Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 4.1). Chapter 10 Router Settings This section is only available for AP Router Mode and Client Router Mode. 10.1 WAN Settings This chapter describes the OM2P V2 WAN settings. There are four types of WAN connections:
- Static IP
- DHCP
- PPPoE
- PPTP Please contact your ISP to find out which settings you should choose.. 10.1.1 Static IP Select Static IP for your WAN connection if your ISP provided information about which IP address, subnet mask, default gateway, primary DNS, and secondary DNS to use. Internet Connection Type Account Name Domain Name MTU IP Address Subnet Mask Gateway IP Address Primary DNS Secondary DNS Discard Ping on WAN Accept / Cancel Select Static IP to begin configuration of the Static IP connection. Enter the account name provided by your ISP. Enter the domain name provided by your ISP. Specify the Maximum Transmit Unit size. It is recommended you accept the default setting of Auto. Otherwise, packets will be fragmented downstream if the MTU is set too high or too low, which impacts network performance. In extreme cases, an MTU setting that is too low can prevent the OM2P V2 from establishing some connections. Enter the WAN port IP address. IP Enter the WAN IP subnet mask. Enter the WAN gateway IP address. Enter the primary DNS IP address. Enter the secondary DNS IP address. Check to Enable to recognize pings on the OM2P V2 WAN interface or Disable to block pings on the OM2P V2 WAN interface. Note: Pinging IP addresses is a common method used by hackers to test whether the IP address is valid. Blocking pings provides some extra security from hackers. Click Accept to confirm the changes or Cancel to cancel and return previous settings. Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 4.1). 10.1.2 DHCP (Dynamic IP) Select DHCP as your WAN connection type to obtain an IP address automatically. You will need to enter account name as your hostname and, optionally, DNS information. Internet Connection Type Account Name Domain Name MTU Select DHCP to begin configuration of the DHCP connection. Enter the account name provided by your ISP. Enter the domain name provided by your ISP. Specify the Maximum Transmit Unit size. It is recommended you accept the default setting of Auto. Otherwise, packets will be fragmented downstream if the MTU is set too high or too low, which impacts network performance. In extreme cases, an MTU setting that is too low can prevent the OM2P V2 from establishing some connections. Get Automatically From ISP Use These DNS Servers Click the radio button to set up the Primary DNS and Secondary Click this radio button to obtain the DNS automatically from the DHCP server. DNS servers manually. Check to Enable to recognize pings on the OM2P V2 WAN interface or Disable to block pings on the OM2P V2 WAN interface. Note: Pinging IP addresses is a common method used by hackers to test whether the IP address is valid. Blocking pings provides some extra security from hackers. Click Accept to confirm the changes or Cancel to cancel and return previous settings. Discard Ping on WAN Accept / Cancel Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 4.1). 10.1.3 PPPoE (Point-to-Point Protocol over Ethernet) Select Point to Point Protocol over Ethernet (PPPoE) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This selection is typically used for DSL services. Remove your PPPoE software from your computer, as it is not needed and will not work with your OM2P V2. Internet Connection Type MTU Select PPPoE to begin configuration of the PPPoE connection. Specify the Maximum Transmit Unit size. It is recommended you accept the default setting of Auto. Otherwise, packets will be fragmented downstream if the MTU is set too high or too low, which impacts network performance. In extreme cases, an MTU Login Password Service Name Connect on Demand Keep Alive setting that is too low can prevent the OM2P V2 from establishing some connections. Enter the Username provided by your ISP. Enter the Password provided by your ISP. Enter the Service Name provided by your ISP. Select the radio button to specify the maximum idle time. Internet connection will disconnect when it reach the maximum idle time, but it will automatically connect when user tries to access the network. Select whether to keep the Internet connection always on, or enter a redial period once the internet lose connection. Select whether to obtain the DNS automatically from the DHCP server. Get Automatically From ISP Use These DNS Servers Click the radio button to set up the Primary DNS and Secondary DNS servers manually. Check to Enable to recognize pings on the OM2P V2 WAN interface or Disable to block pings on the OM2P V2 WAN interface. Note: Pinging IP addresses is a common method used by hackers to test whether the IP address is valid. Blocking pings provides some extra security from hackers. Click Accept to confirm the changes or Cancel to cancel and return previous settings. Discard Ping on WAN Accept / Cancel Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 4.1). 10.1.4 PPTP (Point-to-Point Tunneling Protocol) Select PPTP as your WAN connection type if your ISP uses a Point-to-Point-Tunneling Protocol
(PPTP) connection. You will need to provide the IP address subnet maskdefault gateway
(optional) DNS (optional) server IPusername and password provided by your ISP. WAN Settings Home Resel
!Io
!Io
|o !Io
!il UseTheseDNSServe WAN Ping PingonWAN IApply I Internet Connection Type Select PPTP to begin config uration of the PPTP connection. MTU IP Address Subnet Mask Gateway IP Address PPTP Server Username Password Connect on Demand Keep Alive Specify the Maximum Transmit Unit size. It is recommended you accept the default setting of Auto. Otherwise, packets will be fragmented downstream if the MTU is set too high or too low, which impacts network performance. In extreme cases, an MTU setting that is too low can prevent the OM2P V2 from establishing some connections. Enter the WAN port IP address. IP Enter the WAN IP subnet mask. Enter the WAN gateway IP address. Enter the IP address of the PPTP server. Enter the username provided by your ISP. Enter the password provided by your ISP. If you want the OM2P V2 to end the Internet connection after it has been inactive for a period of time, select this option and enter the number of minutes you want that period of inactivity to last. If you want the OM2P V2 to periodically check your Internet connection, select this option. Then specify how often you want the OM2P V2 to check the Internet connection. If the connection is down, the OM2P V2 automatically re-establishes your connection Obtains the DNS automatically from DHCP server. Get Automatically From ISP Use These DNS Servers Click the radio button to set up the Primary DNS and Secondary DNS servers manually. Check to Enable to recognize pings on the OM2P V2 WAN interface or Disable to block pings on the OM2P V2 WAN interface. Note: Pinging IP addresses is a common method used by hackers to test whether the IP address is valid. Blocking pings provides some extra security from hackers. Click Accept to confirm the changes or Cancel to cancel and return previous settings. Discard Ping on WAN Accept / Cancel Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 4.1). 10.2 LAN Settings (Router Mode) IP Address Enter the LAN port IP address. IP Subnet Mask Enter the LAN IP subnet mask. WINS Server IP Enter the WINS Server IP. Use Router As DHCP Server Starting IP Address Check this option to enable the OM2P V2 internal DHCP server. Specify the starting IP address range for the pool of allocated for private IP addresses. The starting IP address must be on the same subnet as the ending IP address; that is the first three octets specif ied here must be the same as the first three octets in End IP Address. Specify the ending IP address range for the pool of allocated for private IP addresses. The ending IP address must be on the same subnet as the starting IP address; that is the first three octets specif ied here must be the same as the first three octets in Start IP Address. Enter the IP address of the WINS server. Click Accept to confirm the changes or Cancel to cancel and return previous settings. Ending IP Address WINS Server IP Accept / Cancel Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 4.1). 10.3 VPN Pass Through VPN Passthrough allows a secure virtual private network (VPN) connection between two computers. Enabling the options on this page opens a VPN port and enables connections to pass through the OM2P V2 without interruption. PPTP Pass Through Check this option to enable PPTP pass-through mode. L2TP Pass Through Check this option to enable L2TP pass-through mode. IPSec Pass Through Check this option to enable IPSec pass-through mode. Accept / Cancel Click Accept to confirm the changes or Cancel to cancel and return previous settings. Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 4.1). 10.4 Port Forwarding Port forwarding can be used to open a port or range of ports to a device on your network Using port forwarding, you can set up public services on your network. When users from the Internet make certain requests on your network, the OM2P V2 can forward those requests to computers equipped to handle the requests. If, for example, you set the port number 80
(HTTP) to be forwarded to IP address 192.168.1.2, all HTTP requests from outside users are forwarded to 192.168.1.2. Add Entry Accept Click Add Entry to add port forwarding rules. Click Accept to confirm the changes. Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 4.1). Service Name Protocol Enter a name for the port forwarding rule. Select a protocol for the application: Choices are Both, TCP, and UDP. Enter a starting port number. Starting Port Ending Port Enter an ending port number. All ports numbers between the starting and ending ports will forward users to the IP address specif ied in the IP Address field. Enter the IP address of the server computer on the LAN network where users will be redirected. IP Address Save / Cancel Click Save to apply the changes or Cancel to return previous settings. 10.5 DMZ If you have a computer that cannot run Internet applications properly from behind the OM2P V2, you can allow the computer to have unrestricted Internet access. Enter the IP address of that computer as a Demilitarized Zone (DMZ) host with unrestricted Internet access. Adding a client to the DMZ may expose that computer to a variety of security risks, so use this option as a last resort. DMZ Hosting DMZ Address Accept / Cancel Enables or disables the OM2P V2 DMZ function. Enter an IP address of the computer that will have unlimited Internet access. Click Accept to confirm the changes or Cancel to cancel and return previous settings. Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 4.1). Chapter 11 Management Settings The Management section lets you configure administration, management VLAN, SNMP settings, backup/restore settings, firmware upgrade, time settings, and log settings. This chapter describes these settings. 11.1 Administration Click the Administration link under the Management menu to change the user name and password used to log on to the OM2P V2 Web Configurator . The default user name is admin and the default password is admin. Changing these settings protects the OM2P V2 configuration settings from being accessed by unauthorized users. Name Password Confirm Password Remote Management Remote Upgrade Remote Management Port Enter a new username for logging in to the Web Configurator. Enter a new password for logging in to the Web Configurator Re-enter the new password for confirmation. Enable or disable remote management. Specify whether the OM2P V2 firmware can be upgraded remotely. If remote management is enabled, enter the port number to be used for remote management. For example: If you specify the port number 8080, enter http://<IP address>:8080 to access Save/Apply / Cancel the OM2P V2 Web Configurator. Click Save/Apply to apply the changes or Cancel to return previous settings. Clicking Save/Apply changes the settings immediately. You cannot undo the action. 11.2 Management VLAN Click the Management VLAN link under the Management menu to assign a VLAN tag to the packets. A VLAN is a group of computers on a network whose software has been configured so that they behave as if they were on a separate Local Area Network (LAN). Computers on VLAN do not have to be physically located next to one another on the LAN Management VLAN ID If your network includes VLANs and if tagged packets need to pass through the Access Point, enter the VLAN ID. Otherwise, click No VLAN tag . Click Accept to confirm the changes or Cancel to cancel and return previous settings. Accept / Cancel 1. If you reconfigure the Management VLAN ID, you may lose your connection to the OM2P V2. Verify that the DHCP server supports the reconfigured VLAN ID and then reconnect to the OM2P V2 using the new IP address. 2. Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 4.1). 11.3 SNMP Settings Click the SNMP Settings link under the Management menu to monitor network-attached devices using the Simple Network Management Protocol (SNMP). SNMP allows messages
(called protocol data units) to be sent to various parts of a network. Upon receiving these messages, SNMP-compatible devices (called agents) return data stored in their Management Information Bases. SNMP Enable/Disable function. Contact Location Community Name Community Name Trap Destination IP Address Trap Destination Community Name Save/Apply / Cancel Enable or disable the OM2P V2 SNMP Enter the contact details of the device. Enter the location of the device. Enter the password for accessing the SNMP community for read-only access. Enter the password for accessing the SNMP community for read and write access. Enter the IP address where SNMP traps are to be sent. Enter the password of the SNMP trap community. Click Save/Apply to apply the changes or Cancel to return previous settings. Clicking Save/Apply change the setting immediately. You cannot undo the action. 11.4 Backup/Restore Settings Click the Backup/Restore Setting link under the Management menu to save the OM2P V2s current settings in a file on your local disk or load settings onto the device from a local disk. This feature is particularly convenient administrators who have several OM2P V2 devices that need to be configured with the same settings. This page also lets you return the OM2P V2 to its factory default settings. If you perform this procedure, any changes made to the OM2P V2 default settings will be lost. Save A Copy of Current Settings Restore Saved Settings from a File Revert to Factory Default Settings Click Backup to save the current configured settings. To restore settings that have been previously backed up, click Browse, select the file, and click Restore. Click this button to restore the OM2P V2 to its factory default settings. 11.5 Firmware Upgrade Click the Firmware Upgrade link under the Management menu to upgrade the firmware of the device. To perform this procedure, downloaded the appropriate firmware from your vendor. The firmware upgrade procedure can take few minutes. Do not power off the OM2P V2 during the firmware upgrade, as it can cause the device to crash or become unusable. The OM2P V2 restarts automatically after the upgrade completes. 11.6 Time Settings Click the Time Settings link under the Management menu to configure the OM2P V2 system time. You can enter the time manually or, to ensure accuracy, synchronize the OM2P V2 with Network Time Protocol (NTP) server. Manually Set Date and Time Automatically Get Date and Time Save/Apply / Cancel Manually specify the date and time. Select a time zone from the drop-down list and check whether you want to enter the IP address of an NTP server or use the default NTP server. Click Save/Apply to apply the changes or Cancel to return previous settings. Clicking Save/Apply changes the setting immediately. You cannot undo the action. 11.7 Log Click the Log link under the Management menu to display a list of events that are triggered on the OM2P V2 Ethernet and wireless interfaces. You can consult this log if an unknown error occurs on the system or when a report needs to be sent to the technical support department for debugging purposes. Syslog Log Server IP Address Local Log Save/Apply / Cancel Enable or disable the OM2Psyslog function. Enter the IP address of the log server. Enable or disable the local log service. Click Save/Apply to apply the changes or Cancel to return previous settings. Clicking Save/Apply changes the settings immediately. You cannot undo the action. 11.8 Diagnostics Click the Diagnostics link under the Management menu to ascertain connection quality and trace the routing table to the target. Target IP Ping Packet Size Number of Pings Start Ping Traceroute Target Start Traceroute Enter the IP address you would like to search. Enter the packet size of each ping. Enter the number of times you want to ping. Click Start Ping to begin pinging. Enter an IP address or domain name you want to trace. Click Start Traceroute to begin the trace route operation. Chapter 12 Network Configuration Examples This chapter provides step-by-step descriptions for using the OM2P V2s operating modes. The Access Point Modes default configuration allows the OM2P V2 to act as a central unit of a WLAN or as a root device of a wired environment. Repeater mode and Mesh network mode are reserved for future configuration. 12.1 Access Point Access Point Step1 Step2 Step3 Step4 Step5 Step6 Step7 Log in to the Web Configurator with your browser by entering the default IP address 192.168.1.1 Use site survey to scan channels available in nearby areas. Select channel with less interferences. Specify the SSID for your broadcast SSID and you can also configure multiple SSID at the same time. Verify the VLAN identif ier to separate services among clients Set the authentication settings. Click Apply to save all changes. For more advanced settings, refer to the previous chapters. Wireless Client Step1 Step2 Step3 Step4 Select the wireless mode with which you want to associate. Use site survey to scan nearby Access Point and either select the Access Point to which you want to connect, or enter the SSID manually. Configure the VLAN ID in your wireless device if available. Select the appropriate authentication type and password. Access Point Mode does not provide DHCP server, so the Wireless Client IP address must be configured manually using the same Local Area Network subnet. 12.2 Client Bridge Mode Client Bridge Mode functions like a wireless dongle. It must connect to an Access Point/AP Router to join the network. Refer to Chapter 13 to check the Access Points configuration. Client Bridge Step1 Step2 Step3 Step4 Step5 Step6 Log in to the Web Configurator with the default IP address 192.168.1.1 For Operation Mode, select Client Bridge from System Properties. Use site survey to scan Access Points that are available in nearby areas. Select the Access Point with which you want to associate. Set up the authentication settings that match the Access Points settings. Click Apply to save all changes. The Client Bridge IP settings must match the Access Points subnet. 12.3 WDS Bridge Mode Use this feature to link multiple Access Points in a network. All clients associated with any Access Points can communicate with each other in an ad-hoc manner. WDS Bridge Step1 Step2 Step3 Step4 Step5 Step6 Step7 Log in to the Web Configurator with the default IP address 192.168.1.1 For Operation Mode, select WDS Bridge from System Properties. Select the channel you want to use. Set up the authentication settings Set up WDS Link Settings. Specify the MAC address of the Access Point with which you want to connect. Click Apply to save all changes. Each WDS bridge device must use the same Subnet, Wireless Mode, Wireless Channel, and Security Setting. 12.4 Client Router In Client Router Mode, the OM2P V2s internal DHCP server allows LANs to automatically generate an IP address to share the same Internet. Connect an Access Point/WISP wirelessly and connect to LANs using a wired connection. Refer to Chapter 13 to check the Access Points configuration. Client Router Step1 Step2 Step3 Step4 Step5 Step6 Step7 Step8 Log in to the Web Configurator with the default IP address 192.168.1.1 For Operation Mode, select Client Router from System Properties. Change your Local Area Network setting to Obtain an IP Address Automatically. Use site survey to scan Access Points that are available in nearby areas. Select the Access Point with you want to associate. Set up authentication settings that match the Access Points settings. Set your WAN connection type using the WAN settings provided by your ISP. Click Apply to save all changes. Client Routers IP setting must match to the Access Points subnet. Chapter 13 Building a Wireless Network With its ability to operate in various operating modes, your OM2P V2 is the ideal device around which you can build your WLAN. This appendix describes how to build a WLAN around your OM2P V2 using he devices operating modes. 13.1 Access Point Mode In Access Point Mode, OM2P V2 behaves likes a central connection for stations or clients that support IEEE 802.11b/g/n networks. Stations and client must be conf igured to use the same SSID and security password to associate with the OM2P V2. The OM2P V2 supports four SSIDs at the same time for secure guest access. 13.2 Access Point Mode with WDS Function The OM2P V2 Access Point Mode also supports WDS functionality. This operating mode allows wireless connections to the OM2P V2 using WDS technology. In this mode, conf igure the MAC addresses in both Access Points to enlarge the wireless area by enabling WDS Link settings. WDS supports eight AP MAC addresses. Not every Access Point device supports WDS in Access Point Mode. As a result, to use WDS, we recommend you use the OM2P V2. 13.3 Client Bridge Mode In Client Bridge Mode, the OM2P V2 behaves like a wireless client that connects to an Access Point wirelessly and allows users to surf the Internet whenever they want. In this mode, use the OM2P V2 Site Survey to scan for Access Points within range. Then configure the OM2P V2 SSID and security password accordingly to associate with the Access Point. In this configuration, the station has a wired Ethernet connection to the OM2P V2 LAN port. 13.4 WDS Bridge Mode In WDS Bridge Mode, the OM2P V2 can wirelessly connect different LANs by configuring the MAC address and security settings of each OM2P V2 device. Use this mode when two wired LANs located a small distance apart want to communicate with each other. The best solution is to use the OM2P V2 to wirelessly connect two wired LANs, as shown in the following figure. WDS Bridge Mode can establish 16 WDS links, creating a star-like network. WDS Bridge Mode is unlike Access Point. Access Points linked by WDS are using the same frequency channel, more Access Points connected together may lower throughput. Please be aware to avoid loop in your wireless connection, otherwise enable Spanning Tree Function. 13.5 Client Router Mode In Client Router Mode, the OM2P V2s internal DHCP server allows a number of LANs to automatically generate IP addresses to share the same Internet. In this mode, connect an AP/WISP wirelessly and connect to LANs via a wired connection. 13.6 RADIUS Connections Remote Authentication Dial In User Service (RADIUS) authentication is available when configuring the OM2P V2 wireless advanced settings (see Chapter 8). Use this feature if you have a RADIUS server. WPA(TKIP), WPA2(AES), and WPA2 Mixed encryption types are also supported. The following figure shows an example of a RADIUS configuration, where two OM2P V2 devices installed at different locations communicate with each other wirelessly. In this configuration, one OM2P V2 is configured for Access Point Mode and connected to a RADIUS server via a switch, while the other OM2P V2 is configured for Client Bridge Mode. The RADIUS server uses an authentication scheme such as PAP or CHAP to verify a user's identification, along with, optionally, other information related to the request, such as the user's network address or phone number, account status and specif ic network service access privileges. The RADIUS server then returns one of three responses to the OM2P V2 : Access Reject (user is denied access to all requested network resources), Access Challenge (requests additional information from the user such as a secondary password), PIN, token or card), or Access Accept (user is granted access). Appendix A Troubleshooting This appendix provides problem-solving information you may find useful in case you need to troubleshoot your OM2P V2. It also includes information about contacting technical support. A.1 Problem Solving Question How do I reset the OM2P V2?
Why do I not see traffic pass after I connect the OM2P V2 to a PoE switch?
Answer There are two ways to reset the OM2P V2, a hardware method and a software method. Both methods return the OM2P V2 to its factory default configuration. To use the hardware method, open the cover on the bottom panel of the OM2P V2 and find the Reset button (see section 2.1). Using a flat object such as a pencil, press the Reset button for approximately 10 seconds and then stop pressing. To use the software method, click Restore to Factory Default in the Management menu. The OM2P V2 uses a proprietary PoE injector and will not work with standard 802.3af-
compliant What is the default IP address of the OM2P V2? The default IP address is 192.168.1.1 I plugged the PoE to the second Ethernet port on the back of OM2P V2 but the unit is not on, how come?
You need to plug the Ethernet cable connect to PoE injector to the main LAN port. The secondary Ethernet port is just an additional LAN port for regular Ethernet connection such as IP camera The OM2P V2 uses a proprietary PoE injector and will not work with standard 802.3af-
compliant Use the antenna appropriate for the frequency.
(2.4 GHz) Use an antenna with a SMA connector to connect to the OM2P V2. When I install the PoE connection to the OM2P V2, what kind of PoE should I use?
I want to use higher gain antennas on the OM2P V2, but I dont know what antenna is right. I want to buy a high-gain antenna for the OM2P V2, but I dont know what type of antenna and RF connector to buy. 85 A.2 Contacting Technical Support If you encounter issues that cannot be resolved using this manual, please contact your vendor where you purchase the device. If you cannot contact your vendor, you may also contact EnGenius Customer Service department in the region where you purchased the device. Before you contact your local EnGenius office, please prepare the following information:
Product model name and serial number The place where you purchased the product Warranty information The date when you received the product A brief description about the issue and the attempts you tried to resolve it To contact EnGenius Customer Service office in the United States, please use either of the following methods:
Email: Support@EnGeniustech.com Telephone: 1-888-735-7888 Appendix C Glossary Access Point A base station in a WLAN that act as a central transmitter and receiver of WLAN radio signals. Ad Hoc Network A short-term WLAN framework created between two or more WLAN adapters, without going through an Access Point. An ad hoc network lets computers send data directly to and from one another. For an ad hoc network to work, each computer on the network needs a WLAN card installed configured for Ad Hoc mode. Antenna A device that sends and receives radio-frequency (RF) signals. Often camouflaged on existing buildings, trees, water towers or other tall structures, the size and shape of antennas are generally determined by the frequency of the signal they manage. Authentication A process that verifies the identity of a wireless device or end-user. A common form of authentication is to verify identities by checking a user name and password to allow network access. Backbone A high-speed line or series of connections that form a major pathway within a network. Bandwidth The part of the frequency spectrum required to transmit desired information. Each radio channel has a center frequency and additional frequencies above and below this carrier frequency that carry the transmitted information. The range of frequencies from the lowest to the highest used is called the bandwidth. Bridge A wireless device that connects multiple networks that are physically separate or use different media, but which use similar standards. Bridge Mode An Access Pointy in bridge mode can operate as a WLAN bridge that connects two wired network segments. The peer device also must be in bridge mode. This wireless bridge connection is equivalent to a Wireless Distribution System (WDS). CHAP Challenge Handshake Authentication Protocol. An alternative protocol that uses a challenge/response technique instead of sending passwords over the wire. Collision Interference resulting from two network devices sending data at the same time. The network detects the collision of the two transmitted packets and discards both of them. Coverage The region within which a paging receiver can reliably receive the transmission of paging signals. Coverage Area The geographical area that can be served by a mobile communications network or system. Coverage Hole An area within the radio coverage footprint of a wireless system where the RF signal level is below the design threshold. Physical obstructions such as buildings, foliage, hills, tunnels, and indoor parking garages are usually the cause of coverage holes. Cyclic Redundancy Check (CRC) A common technique for detecting data transmission errors. Dynamic Host Configuration Protocol (DHCP) A protocol that assigns temporary IP addresses automatically to client stations logging onto an IP network, so the IP addresses do not have to be assigned manually. The OM2P V2 contains an internal DHCP server that automatically allocates IP address using a user-defined range of IP addresses. Dead Spot An area within the coverage area of a WLAN where there is no coverage or transmission falling off. Electronic interference or physical barriers such as hills, tunnels, and indoor parking garages are usually the cause of dead spots. See also coverage area. 802.11 A category of WLAN standards defined by the Institute of Electrical and Electronics Engineers
(IEEE). 802.11a An IEEE standard for WLANs that operate at 5 GHz, with data rates up to 54 Mbps. 802.11b An IEEE standard for WLANs that operate at 2.4 GHz, with data rates up to 11 Mbps. 802.11g An IEEE standard for WLANs that operates at 2.4 GHz, with data rate of 300 Mbps. The new standard also raises the encryption bar to WPA2. The 40 HT option can be added to increase the data rate. Encryption Translates data into a secret code to achieve data security. To read an encrypted file, you must have a secret key or password for decryption. Unencrypted data is referred to as plain text;
encrypted data is referred to as cipher text ESS ID The unique identifier for an ESS. All Access Points and their associated wireless stations in the same group must have the same ESSID. Footprint Geographical areas where an entity is licensed to broadcast its signal. Gateway A computer system or other device that acts as a translator between two systems that use different communication protocols, data formatting structures, languages, and/or architecture. HT mode In the 802.11n system, two new formats, called High Throughput (HT), are defined for the Physical Layer, Mixed Mode, and Green Field. If a system runs 40 HT, two adjacent 20 MHz channels are used. The larger 40 MHz bandwidth can provide better transmit quality and speed. Keys Like passwords, keys open (decrypt) and close (encrypt) messages. While many encryption algorithms are commonly known and public, the key must be kept secret. Local-Area Network (LAN) A small data network covering a limited area, such as a building or group of buildings. Most LANs connect workstations or personal computers. LANs let many users share devices such as printers as well as data. LANs also facilitate communication through e-mail or chat sessions. Media Access Control (MAC) Address Address associated with every hardware device on the network. Every 802.11 wireless device has its own specific MAC address. This unique identifier is hard-coded into the device and can be used to provide security for WLANs. When a network uses a MAC table, only the 802.11 radios that have their MAC addresses added to that network's MAC table can access the network. Network Address Translation (NAT) An Internet standard that lets a LAN use one set of IP addresses for internal traffic and a second set of addresses for external traffic. Network Time Protocol (NTP) A protocol that lets devices synchronize their time with a time server. NTP uses TCP or UDP port 123 by default. Passphrase A text string that automatically generates WEP keys on wireless client adapters. Power Over Ethernet (PoE) A PoE provides power to PoE-enabled devices using an 8-pin CAT 5 Ethernet cable, eliminating the need for a power source. Preamble Synchronizes transmissions in a WLAN. The preamble type defines the length of the Cyclic Redundancy Check block for communication between a device and roaming wireless stations. Protected Extensible Authentication Protocol (PEAP) Authentication protocol of IEEE 802.1x used to send authentication data and passwords over 802.11 WLANs. Quality of Service (QoS) A networks ability to deliver data with minimum delay. QoS also refers to the networking methods used to provide bandwidth for real-time multimedia applications. Remote Authentication Dial-In User Service (RADIUS) Networking protocol that provides centralized authentication, authorization, and accounting management for computers to connect and use a network service. Because of its broad support and ubiquitous nature, the RADIUS protocol is often used by ISPs and enterprises to manage access to the Internet or internal networks, WLANs, and integrated e-mail services. Service Set Identifier (SSID) Name of a WLAN. All wireless devices on a WLAN must use the same SSID to communicate with each other. Simple Network Management Protocol (SNMP) An Internet-standard protocol for managing devices on IP networks. Snooping Passively watching a network for data, such as passwords, that can be used to benefit a hacker. Temporal Key Integrity Protocol (TKIP) An encryption protocol that uses 128-bit keys. Keys are dynamically generated and distributed by the authentication server. TKIP regularly changes and rotates encryption keys, with an encryption key never being used twice. Transmission Control Protocol/Internet Protocol (TCP/IP) A protocol that allows communications over and between networks. TCP/IP is the basis for Internet communications. Weighted Fair Queuing (WFQ) WFQ services queues are based on priority and queue weight. Queues with larger weights get more service than queues with smaller weights. This highly efficient queuing mechanism divides available bandwidth across different traffic queues. Wired Equivalent Privacy (WEP) Security protocol that provides a WLAN with a level of security and privacy comparable to that of a wired LAN. WEP encrypts data sent between wired and WLANs to keep transmissions private. Wireless Local-Area Network (WLAN) WLANs use RF technology to send and receive data wirelessly in a certain area. This lets users in a small zone send data and share resources such as printers without using cables to physically connect each computer. Wi-Fi Protected Access (WPA ) A subset of the IEEE 802.11i standard. WPA applies IEEE 802.1x and Extensible Authentication Protocol (EAP) to authenticate wireless clients using an external RADIUS database. WPA uses Temporal Key Integrity Protocol (TKIP), Message Integrity Check (MIC), and IEEE 802.1x to encrypt data. See also WPA-PSK (WPA -Pre-Shared Key). Wi-Fi MultiMedia (WMM) Part of the IEEE 802.11e QoS enhancement to the Wi-Fi standard that ensures quality of service for multimedia applications in WLANs. Wireless Client Supplicants Software that runs on an operating system, instructing the wireless client how to use WPA. WPA -Pre-Shared Key (WPA-PSK) WPA-PSK requires a single (identical) password entered into each Access Point, wireless gateway, and wireless client. A client is granted access to a WLAN if the passwords match. WPA2 A wireless security standard that defines stronger encryption, authentication, and key management than WPA. It includes two data encryption algorithms, Temporal Key Integrity Protocol (TKIP) and Advanced Encryption Standard (AES)in the Counter mode with Cipher block chaining Message authentication Code Protocol (CCMP). Wireless Distribution System (WDS) A technology that lets Access Points communicate with one another to extend the range of a WLAN. Appendix D FCC Interference Statement Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
-
-
-
-
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Copyright 2011 ENGENIUS TECHNOLOGIES, INC., All rights reserved. Europe EU Declaration o of Conformity This device complies with the essential requirements of the R&TTE Directive This device complies with the essential requirements of the R&TTE Directive This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove 1999/5/EC. The following test methods have been applied in order to prove 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive presumption of conformity with the essential requirements of the R&TTE Directive presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:
- EN60950-1 Safety of Information Technology Equipment Safety of Information Technology Equipment
-
- EN50385
- Generic standard to demonstrate the compliance of electronic and electrical Generic standard to demonstrate the compliance of electronic and electrical Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic apparatus with the basic restrictions related to human exposure to electromagnetic apparatus with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz)
-
- EN 300 328 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband
- Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering band and using spread spectrum modulation techniques; Harmonized EN covering band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive requirements under article 3.2 of the R&TTE Directive EN 301 489-1 Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common Compatibility (EMC) standard for radio equipment and services; Part 1: Common Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements
- EN 301 489-17
- Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific Compatibility (EMC) standard for radio equipment and services; Part 17: Specific Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high conditions for 2,4 GHz wideband transmission systems and 5 GHz high conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment equipment 0560 0560 esky
[Czech]
Dansk
[Danish]
Deutsch
[German]
[Jmno vrobce] tmto prohlauje, e tento pslunmi ustanovenmi smrnice 1999/5/ES. pslunmi ustanovenmi smrnice 1999/5/ES. tmto prohlauje, e tento [typ zazen] je ve shod se zkladnmi poadavky a dalmi je ve shod se zkladnmi poadavky a dalmi Undertegnede [fabrikantens navn]
overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF.
[fabrikantens navn] erklrer herved, at flgende udstyr [udstyrets typebetegnelse]
[udstyrets typebetegnelse]
[Name des Herstellers], dass sich das Gert [Gertetyp] in bereinstimmung mit d Hiermit erklrt [Name des Herstellers]
grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. in bereinstimmung mit den Eesti
[Estonian]
Kesolevaga kinnitab [tootja nimi =
[seadme tp = type of equipment]
[tootja nimi = name of manufacturer] seadme [seadme tp = type of equipment]
vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. English
[name of manufacturer], declares that this [type of equipment] is in compliance with the is in compliance with the Hereby, [name of manufacturer]
essential requirements and other relevant provisions of Directive 1999/5/EC. essential requirements and other relevant provisions of Directive 1999/5/EC. essential requirements and other relevant provisions of Directive 1999/5/EC. Espaol
[Spanish]
[Greek]
Franais
[French]
Italiano
[Italian]
Latviski
[Latvian]
Lietuvi
[Lithuanian]
Por medio de la presente Por medio de la presente [nombre del fabricante] declara que el [clase de equipo]
requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. requisitos esenciales y cualesquier a otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
[clase de equipo] cumple con los
[name of manufacturer]
1999/
1999/
1999/5/.
[name of manufacturer] [type of equipment]
[type of equipment]
Par la prsente [nom du fabricant]
essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
[nom du fabricant] dclare que l'appareil [type d'appareil] est conforme aux exigences est conforme aux exigences Con la presente [nome del
[nome del costruttore] dichiara che questo [tipo di apparecchio]
essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
[tipo di apparecchio] conforme ai requisiti
[name of manufacturer / izgatavotja nosaukums] deklar, ka [type of equipment / iekrtas tips]
pe of equipment / iekrtas tips]
Ar o [name of manufacturer atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem.
[manufacturer name] deklaruoja, kad is [equipment type] atitinka esminius reikalavimus ir kitas atitinka esminius reikalavimus ir kitas iuo [manufacturer name]
1999/5/EB Direktyvos nuostatas. 1999/5/EB Direktyvos nuostatas. Nederlands
[Dutch]
Hierbij verklaart [naam van de fabrikant]
essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. essentile eisen en de andere relevante bepalingen van r ichtlijn 1999/5/EG.
[naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de in overeenstemming is met de Malti
[Maltese]
Magyar
[Hungarian]
Polski
[Polish]
Portugus
[Portuguese]
Slovensko
[Slovenian]
Slovensky
[Slovak]
Suomi
[Finnish]
Hawnhekk, [isem tal-m essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC. essenzjali u ma provvedimenti orajn relevanti li hemm fid Dirrettiva 1999/5/EC. manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal jikkonforma mal-tiijiet Alulrott, [gyrt neve]
s az 1999/5/EC irnyelv egyb elrsainak s az 1999/5/EC irnyelv egyb elrsainak. nyilatkozom, hogy a [... tpus] megfelel a vonatkoz alapvet kvetelmnyeknek megfelel a vonatkoz alapvet kvetelmnyeknek Niniejszym [nazwa producenta]
oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC. oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
[nazwa producenta] owiadcza, e [nazwa wyrobu] jest zgodny z zasadniczymi wymogami jest zgodny z zasadniczymi wymogami
[Nome do fabricante] declara que este e outras disposies da Di e outras disposies da Directiva 1999/5/CE. declara que este [tipo de equipamento] est conforme com os requisitos essenciais est conforme com os requisitos essenciais
[Ime proizvajalca] izjavlja, da je ta doloili direktive 1999/5/ES. doloili direktive 1999/5/ES. izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi v skladu z bistvenimi zahtevami in ostalimi relevantnimi
[Meno vrobcu] tmto vyhlasuje, e ustanovenia Smernice 1999/5/ES. ustanovenia Smernice 1999/5/ES. tmto vyhlasuje, e [typ zariadenia] spa zkladn poiadavky a vetky prslun spa zkladn poiadavky a vetky prslun manufacturer] vakuuttaa tten ett [type of equipment = laitteen tyyppimerkint]
[type of equipment = laitteen tyyppimerkint]
[Valmistaja = manufacturer]
tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten j a sit koskevien direktiivin muiden ehtojen mukainen. Svenska
[Swedish]
Hrmed intygar [fretag]
egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG.
[fretag] att denna [utrustningstyp] str I verensstmmelse med de vsentliga str I verensstmmelse med de vsentliga Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2014-02-24 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2014-02-24
|
||||
| 1 | Applicant's complete, legal business name |
Datto, Inc.
|
||||
| 1 | FCC Registration Number (FRN) |
0026323543
|
||||
| 1 | Physical Address |
101 Merritt 7
|
||||
| 1 |
Norwalk, CT
|
|||||
| 1 |
United States
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
c******@curtis-straus.com
|
||||
| 1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
WT8
|
||||
| 1 | Equipment Product Code |
OM2PV2
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
C****** H********
|
||||
| 1 | Title |
Chief Compliance Officer
|
||||
| 1 | Telephone Number |
88829********
|
||||
| 1 | Fax Number |
88829********
|
||||
| 1 |
c******@datto.com
|
|||||
| app s | Technical Contact | |||||
| n/a | ||||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | DTS - Digital Transmission System | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless 802.11b/g/n Mesh Router | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Output power listed is conducted. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
||||
| 1 | Name |
R**** C********
|
||||
| 1 | Telephone Number |
+886-******** Extension:
|
||||
| 1 | Fax Number |
+886-********
|
||||
| 1 |
r******@tw.bureauveritas.com
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.2630000 | ||||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC