FCC ID: A25-TX015A Remote Control - Transmitter

OPERATION INSTRUCTION 1 2 3 Front TX015 MODEL:

TX015 TX015 TX015-L TX015-L TX015-R TX015-R TX015-C TX015-C TX015-LR TX015-LR TX015-LC TX015-LC TX015-RC TX015-RC TX015-LRC TX015-LRC 4 5 Note: Install the 12-volt battery to the remote control. TX015-L 6 Back Back Remote Control Functions:

Remote Control Functions:

1. Fan speed control button: To control the ceiling fan speed HIGH MEDIUM,LOW. 2. FAN/OFF Button: To turn the fan on/off. 3. Sleep Timer Button. 4. LIGHT ON/OFF/DIMMING Button: To control

, light on/off/dimming. 1. Fan speed control button: To control the ceiling fan speed HIGH MEDIUM,LOW. 2. FAN/OFF Button: To turn the fan on/off. 3. Sleep Timer Button. 4. LIGHT ON/OFF/DIMMING Button: To control

, light on/off/dimming. 5. Reverse Setting Switch: To control fan 5. Reverse Setting Switch: To control fan direction. direction. 6. Learning code Customization. pairing function;

OPERATION INSTRUCTION TX015-R 6 TX015-C 6 Back Back Remote Control Functions:

1. Fan speed control button: To control the ceiling fan speed HIGH MEDIUM,LOW. 2. FAN/OFF Button: To turn the fan on/off. 3. Sleep Timer Button. 4. LIGHT ON/OFF/DIMMING Button: To control

, light on/off/dimming. 5.Reverse Setting Switch: To control fan direction. 6. Select Light ON/OFF Mode or Light ON/OFF/DIMMING Mode;

Customization. Remote Control Functions:

1. Fan speed control button: To control the ceiling fan speed HIGH MEDIUM,LOW. 2. FAN/OFF Button: To turn the fan on/off. 3. Sleep Timer Button. 4. LIGHT ON/OFF/DIMMING Button: To control

, light on/off/dimming. 5.Reverse Setting Switch: To control fan 6. Select Common Code / Private Code System;

direction. Customization. TX015-LR 7 6 TX015-LC 7 6 Back Back Remote Control Functions:

1. Fan speed control button: To control the ceiling fan speed HIGH MEDIUM,LOW. 2. FAN/OFF Button: To turn the fan on/off. 3. Sleep Timer Button. 4. LIGHT ON/OFF/DIMMING Button: To control

, light on/off/dimming. 5. Reverse Setting Switch: To control fan 6. direction. Learning code Customization. pairing function;

7. Select Light ON/OFF Mode or Light ON/OFF/DIMMING Mode;

Customization. Remote Control Functions:

1. Fan speed control button: To control the ceiling fan speed HIGH MEDIUM,LOW. 2. FAN/OFF Button: To turn the fan on/off. 3. Sleep Timer Button. 4. LIGHT ON/OFF/DIMMING Button: To control

, light on/off/dimming. 5. Reverse Setting Switch: To control fan 6. direction. Learning code Customization. pairing function;

7. Select Common Code / Private Code System;

Customization. OPERATION INSTRUCTION TX015-RC 7 6 TX015-LRC 8 7 6 Back Back Remote Control Functions:

Remote Control Functions:

1. Fan speed control button: To control the ceiling fan speed HIGH MEDIUM,LOW. 2. FAN/OFF Button: To turn the fan on/off. 3. Sleep Timer Button. 4. LIGHT ON/OFF/DIMMING Button: To control

, light on/off/dimming. 1. Fan speed control button: To control the ceiling fan speed HIGH MEDIUM,LOW. 2. FAN/OFF Button: To turn the fan on/off. 3. Sleep Timer Button. 4. LIGHT ON/OFF/DIMMING Button: To control

, light on/off/dimming. 5. Reverse Setting Switch: To control fan 5. Reverse Setting Switch: To control fan direction. 6. Select Light ON/OFF Mode 6. or Light ON/OFF/DIMMING Mode;

Customization. 7. Select Common Code / Private Code System;

Customization. direction. Learning code Customization. pairing function;

7. Select Light ON/OFF Mode or Light ON/OFF/DIMMING Mode;

Customization. Customization. 8. Select Common Code / Private Code System;

OPERATION INSTRUCTION This device has been teste d and found to comply with t he limits for a Class B dig ital device, pursuant to P art 15 of the FCC Rules. These limits are designed to provide reasonable protection aga inst harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the inst ructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interf erence to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correc t the interference by one or more of the follow ing measures:

--Reorient or r elocate the receiving antenna.

--Increase the separation between the device and receiver.

--Connect the device into an outlet on a circuit different from that to which the receiver is connected.

--Consult th e dealer or an experienced radio/TV technician for help. Changes or mod ifications no t expressly approved by the party responsible for compliance could void th e user's authority to operate the equipment. This device contains licence-exempt tran smitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s) .And this device complies with Part 15 of the FCC rules.Ope ration is subje ct to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes :

(1) Cet appareil ne doit pas causer d'interfrences.

(2) Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnement indsirable de l'appareil.

Lr fa 5

o 2 2

BS 8 IYLTTTATAY VNR TTANGAT NANNY all b \

wl OL OZ OE OF OS 09 OL O8 06 QOL. Oz a A iy 3

3

3 8

3

B 3 8 8 g

202 0 op Os se oe os 06 O0bor 02 OF Ov 08 09 OL |

Muu lwtwilatiualiwalialualwulialy \ \w

August 14, 2023 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen Timeway Testing Laboratories/ Zone C, 1st Floor, Block B, Jun Xiang Da Building, Zhongshan Park Road West, Tong Le Village, Nanshan District, Shenzhen, China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with D a w n S u n E l e c t r o n i c T e c h n o l o g y C o . , L t d . Z h o n g s h a n / N o . 8 N a n y i S t r e e t , X i n g g o n g R o a d , S h a x i T o w n , Z h o n g s h a n , G u a n g d o n g , C h i n a Dated this: August 14, 2023 Agency agreement expiration date: 12 Months By: YaoMing Huang Signature Printed Title: Manager On behalf of: DawnSun Electronic Technology Co., Ltd.Zhongshan Tel No: (86) 0760-87336328

August 14, 2023 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: A25-TX015A Product Name: Remote Control Transmitter Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this: August 14, 2023 Agency agreement expiration date: 12 Months By: YaoMing Huang Signature Printed Title: Manager On behalf of: DawnSun Electronic Technology Co., Ltd.Zhongshan Tel No: (86) 0760-87336328

DawnSun Electronic Technology Co., Ltd. Zhongshan Covered Equipment Certification Attestation Letter 8/14/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: A25-TX015A DawnSun Electronic Technology Co., Ltd. Zhongshan (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not covered equipment. DawnSun Electronic Technology Co., Ltd. Zhongshan (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Signed:

Printed name: YaoMing Huang Title: Manager Company Name: DawnSun Electronic Technology Co., Ltd. Zhongshan Date: 8/14/2023

DawnSun Electronic Technology Co., Ltd. Zhongshan U.S. Agent Designation for Service of Process -

Certification Attestation Letter 8/14/2023 TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTN.: Reviewing Engineer FCC ID: A25TX015A FRN of Grantee: 0021297668 Per section 2.911(d)(7) of the FCC rules, DawnSun Electronic Technology Co., Ltd. Zhongshan

(the applicant) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process:

Company Name: Stariver Consulting Company FCC Registration Number (FRN): 0033400433 Company Address: 2363 James St #1098 Syracuse, NY 13206, USA Agent Name: Chong He Agent Email Address: stariverusagent@gmail.com The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed:

Agent Signed:

Signed:

Printed name: YaoMing Huang Title: Manager Company Name: DawnSun Electronic Technology Co., Ltd. Zhongshan Date: 8/14/2023 Signed:

Printed name: Chong He Title: Manager Company Name: Stariver Consulting Company Date: 8/14/2023

* the applicant must designate a contact located in the United States for purposes of acting as the applicants agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process.