User Manual
: 8386657 & 8393529
: Bluetooth Headphone Beanie Model Number Description A. Product Outlook:
Dimension
: 44(L)*35(W)*13.6Hmm Weight Casing Available Colors
: 30.6g
: Plastic & Silicon
: black casing & blue button B. General information:
Designation : Bluetooth Headphone Beanie model code : 8386657 & 8393529 item code : 2311002 conception code : 115048 C. General Features:
1. Bluetooth Stereo Device for Beanie 2. Beanie is provided by Decathlons supplier. 3. Build with high compatible Bluetooth Chipset: CSR8635 4. Wireless Range: in 10 meters (open area) 5. Support A2DP, ACRCP and HFP Profiles 6. Support Two Way Control Function: play/pause, next/back, volume up/down, pick up or hang Up incoming Call and redial for last called number 7. Supports iPhone, iPad, Androids phoneetc., which devices have Bluetooth function. Button (ON/OFF, Play / Pause, Pick up / Hang up call, Redial last call number) Button (Next / Volume Up) Button (Back / Volume Down) 8. Integrated microphone 9. 30mm Mylar diaphragm and moving coil speaker (Left & Right Channels) 10. Micro USB port for DC Input: DC 5V, 500mA 11. Built-in Rechargeable Lithium Battery: DC 3.7V 110 mAh 12. Music Playing Time: 5.5~6.5 Hours (at 75% ~ 80 % volume output) D. Controls / Connections 1. 2. 3. Remark: Press and hold the button for 8 ~ 10 seconds to reset device. E. Input / Output:
1. Micro USB Port 2. Built-In Microphone F. Indicator:
1. LED indicator G. Standard Accessories:
1. USB charging cable x 1 pc (USB-A plug to micro-USB plug) 2. Users Manual x 1pc H. Standard / Verification:
CE, Sound pressure, RoHS.
(Charge Red / Bluetooth - Blue)
(for DC Input)
(English only) Frequency I. Technical Specification:
Bluetooth:
RF Power Receive Sensitivity Audio SNR Audio:
Stereo Output Power Speaker Impedance & Rated Power Frequency Responses THD Others:
Charge need time Power Source
: 2.402GHz ~ 2.480GHz
: Class 2, 4dBm (max.)
: Better than -80dBm
: Equal or > 70dB (Bluetooth Module)
: 2.6mW (RMS) x 2 Channels
: 32 Ohm
: 80Hz ~ 18KHz
: 0.7%
: Built In Rechargeable Battery Lithium
: about 1 ~ 1.5 hours Operating Temperature
: 0 to 50 Operating Voltage :min 3.0V and max 4.2V Current consumption :Power on</= 18mA;
:After power off<80uA;
:Searching <8mA;
:Playing<20mA;
Main device with right speaker Left speaker Soft linking flat cable Length = 35 +/-1cm Issued Date: 2019 Sep 16 Ref.:
Rev.:
Product introduction:
Elegant appearance and easy to use. Beanie built with Bluetooth device for Bluetooth music playback and hand-free for NDP-010_2016 0 incoming calls via your smartphone. Bluetooth technology allows you to talk on the smartphone without taking it out of the pocket. Connection with the smartphone is obtained using the Bluetooth technology a 10m range. The integrated steering control panel on Beanie allows for receiving and ending calls as well as remotely controlling music without the need to touch your phone. Detachable design and Beanie washable. All electronic elements can be easily removed, which allows for safe cleaning of the fabric. Beanie should be fabric with emulated leathers control plate. (Depend on manufacturer specifications or customer(s) requests) Important!
All electronic elements in beanie are not waterproof design, so its cannot be washed together in a washing machine or soaked. Clean dirty spots using a wet sponge with a little amount of a detergent. Only Beanie can be washed. All electronic elements are must be detached from Beanie before wash it. EN - General instructions for use For US market 8386657 & 8393529 DECATHLON - 735 Market Street, San Francisco, CA 94103 - +1 415-408-5494 DECATHLON customer.service@decathlon.com IMPORTANT
- Decathlon is not liable for accidents or injuries due to improper use of the product, failure to adhere to the instructions given in this guide, or modifications to the product
- To avoid serious injury or death, follow the safety information in this document
- Keep these instructions
- While every effort has been made to ensure that the information contained in the guide is accurate and complete, Decathlon is not liable for any errors or omissions FCC Regulatory information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reaso-
nable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in ac-
cordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. RSS Gen., clause 7.1.3