What's included Main Carton: Connect Box:
Power Supply Hub (Includes battery charger)
Battery / Batteries Yard Sign kit DOWNLOAD THE APP Download the Deep Sentinel app from the App Store or Google Play. Open the app and follow the Instructions. 4 Download on the
@ App Store Download from
> Google Play CONNECT THE HUB
+ Connect the Hub to an available outlet with the included Power Supply
+ Connect the Hub to the Router of Ethernet Switch with the included Ethemet Cable Power Supply Ethernet Cable AGIND LYVLS YDINO Install Box:
\ co ie) ) Camera Mount Window Cling Set
spare Battery <= cs screwdiver a SS Masonry Drill Bit SELECT A PLACE FOR THE HUB Consider the following when evaluating Hub placement:
Put the Hub in a central location in your home
+ The Hub must be connected by an Ethernet Cable to your WEFI Router Put the Hub In a raised position (not on the floor)
* Avold large appliances and sources of signal interference The Hub light will tum on solid green. This might take a minute or two. D 2 minutes
@ Solid Green: onine Hub light status guide:
LS Blinking Green: Connecting to Server WS axetinccroen: Battery Charang Blinking White: In Paring Mode D aainking aiue: Software Updating TD aainking Red: No internet Connection sot Purp: nPrvacy Mode What's required A Working Internet Connection 30 minutes CHARGE THE SPARE BATTERY
+ Remove the ld from the top of the Hub
* Insert the Included spare battery. The Hub light will blink 3 times when charging starts
* Put the lid back onto the Hub wey CONNECT THE CAMERA CAMERA POSITIONING GUIDELINES Aim for side-to-side traffic Recommended height and angle Place the Camera so that side-to-side traffic crosses the fleld of view. The motion sensor Is faster and more sensitve to side-to-side motion.
+ Twist the battery door anti-clockwise and open the compartment
* Insert a batlery with the terminals facing into the compartment
+ Close the battery compartment and turn clockwise to lock
+ When prompted by the app, press the Camera button oo When closing the battery door, make sure the 2 indentations located on the door and camera align to create the weatherproof seal. Ct 3 Minimum IMPROVED DETECTION 35 Maximum AMIAUISNaS a39N03 VERIFY SIGNAL STRENGTH Keep the field of view clear Consider the surroundings
+ Go outside and hold the Camera where you plan to mount It Use the app to check the number of bars in the signal strength Icon If the signal Is weak, try different positions
+ Sometimes moving by a few feet can Improve the signal For best night vision, avold overhangs or obstructions. These may reflect the Camera's IR Illumination and affect nighttime vision. Busy roads, large branches and flags can drain the Camera battery. Try to avold In the fleld of view. ze, Visit deepsentinel.com/support x
Questions?
INSTALL THE MOUNT ATTACH THE CAMERA 1 REQUEST FOR RESPONSE Slide open to reveal the mounting hole. * Slide the Camera Into the mount until it clicks Into position
* Check the ortentation of the Camera, the lens should be at the bottom and the speaker at the top
+ When prompted, use the app to adjust the protection zone To test your connection with a Live Sentinel Guard, make this signal with your hands In front of the Camera and wait for a response. PN: 752-00002 rev. 01 The equipment shall be installed to provide a minimum separation distance of 20 em between he radiating part and the user to ensure compliance with the RF Exposure requirements. Any changes or modification not expressly approved by the party responsible for compliance Shall invalidate the user's authonty to operate the equipment. Note:
This equipment has been tested and found to comply with the limits for a Class 8 cigtal device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, thera is no guarantee that interference will not occur in a particular instalfation. If his equipment does cause harmful interference 10 radio or television reception, which can be cetormined by fuming tho equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
+ Reorient or relocate the receiving antenna.
+ Increase the separation between the equipment and receiver.